If your like me and have struggled with the reader try this method.
Place finger on read and slowly move it up.
Works for me everytime and merry Xmas to you all
Being required to do anything "slowly" isn't a tip. It's a bad reader, and Google needs to acknowledge it. Bad design and implementation on their part. That's it.
never had a problem with mine using the wiping forehead method for the enrolment. Slower than my Oneplus yes, but never failed
dalelindley76 said:
If your like me and have struggled with the reader try this method.
Place finger on read and slowly move it up.
Works for me everytime and merry Xmas to you all
Click to expand...
Click to collapse
I have no problem with the fingerprint reader and I'm using a 3rd party screen protector on the display.
I just got the TOCOL screen protectors after having the phone for a few weeks. Once I put them on I redid my fingerprints for fun and it seems to work just as before. I didn't boost my sensitivity either.
Still no luck for me after adding the screen protector
Zero replies actually acknowledging the advice.
After trying this it seems to work!
I do:
Place
Move a few mm
Stop.
Works great!
I have a Zagg and am still not impressed but this is helping a lot!!
bush911 said:
Still no luck for me after adding the screen protector
Click to expand...
Click to collapse
Try the Gadgetshieldz screen protector which I'm using for a month now, I have no issue with the fingerprint sensor as I mentioned before.
Oddly, while the reader is slower than the one on the back of my Pixel 2XL, I've had no problems with the reader at all unless I move my finger while it's trying to scan. When you guys set up your fingerprints did you follow the advice given and moved your finger so the scanner could scan different portions of the fingerprint during the setup?
Got a Spigen screen protector on and the right thumb is more hit and miss than the left thumb. Unlock rate is about 6/10 for left and 4/10 for the right thumb. They need to fix this issue, little things like this can get annoying. Came from FaceID which was instant no matter in day or total darkness.
I set my phone up straight out of the box and I haven't had a single issue with the fingerprint reader at all. Idk if it's my skin, how I place my thumb on the phone, etc.. I was honestly prepared to have it be awful from everything I've read but mine isn't
strongergravity said:
I just got the TOCOL screen protectors after having the phone for a few weeks. Once I put them on I redid my fingerprints for fun and it seems to work just as before. I didn't boost my sensitivity either.
Click to expand...
Click to collapse
Tocol completely destroyed the ability of my FPR to recognize fingerprints, with or without sensitivity enhancement, with or without forehead fat, etc. But I do have very dry skin.
Thanks - tried and so far seems to improve pass rate....not 100% successful mind you.. Maybe I am moving the finger too much..
Related
I have recently got an S21 Exynos version and the fingerprint reader is useless.
I have the standard screen protector it came with on it and have tried training it multiple times and even doing the same finger more than once and the best I get is sometimes it works 80% of the time and then at other times of the day it'll fail 100%.
I'm not sure if it depends on if my hands are cold or warm and looking at my fingers my fingerprints don't look particularly pronounced but as it stands the phone may as well not have a fingerprint scanner.
Previous phones with dedicated fingerprint sensors have been better but never perfect.
Is this just me or do others have lots of problems too?
This is my first phone with an in-display fingerprint reader, and I certainly prefer ones like the one on my old Note 9, which were literally flawless.
That said, I would classify this one as "serviceable". It doesn't always work, though some of that might be my dry fingers/hands from all the washing and drier winter air. It seems to be improving in reliability as the weather warms and the air gets more humid. I do occasionally fail enough on the fingerprint that I have to enter my password, which is annoying to say the least.
Blowing warm, moist air on my fingers does tend to help, but then I tend to smudge up the screen a bit more. Oh well. Something I'll have to live with.
Hurricane Andrew said:
This is my first phone with an in-display fingerprint reader, and I certainly prefer ones like the one on my old Note 9, which were literally flawless.
That said, I would classify this one as "serviceable". It doesn't always work, though some of that might be my dry fingers/hands from all the washing and drier winter air. It seems to be improving in reliability as the weather warms and the air gets more humid. I do occasionally fail enough on the fingerprint that I have to enter my password, which is annoying to say the least.
Blowing warm, moist air on my fingers does tend to help, but then I tend to smudge up the screen a bit more. Oh well. Something I'll have to live with.
Click to expand...
Click to collapse
Thanks for the quick reply, glad to hear it's working reasonably for you.
Hurricane Andrew said:
It doesn't always work, though some of that might be my dry fingers/hands from all the washing and drier winter air. It seems to be improving in reliability as the weather warms and the air gets more humid.
Click to expand...
Click to collapse
This is 100% why. Throw some lotion on your hands and it will work 100%. Plus, you'll feel better.
entropism said:
This is 100% why. Throw some lotion on your hands and it will work 100%. Plus, you'll feel better.
Click to expand...
Click to collapse
Sadly this doesn't seem to make any difference.
It's very erratic, sometimes it works several times in a row but at others it doesn't work at all for multiple attempts.
Very odd.
I've recently got my S21 and rather quickly found out that I have to push the screen very lightly and it works almost every time. To begin with I assumend that I had to push quite hard, but doing that it didn't work very well, so I stumpled on the light press tip. Anyone else with the same experiences?
Harboe said:
I've recently got my S21 and rather quickly found out that I have to push the screen very lightly and it works almost every time. To begin with I assumend that I had to push quite hard, but doing that it didn't work very well, so I stumpled on the light press tip. Anyone else with the same experiences?
Click to expand...
Click to collapse
It worked with the factory protector on it every time. No need to press deep or medium even. Just worked. Soon as a o removed this for some glass protection, boom. It simply will not work. And I've blown way too much money on protectors that do not work! Really sad, since I came from multiple Chinese budget flagships that do this perfectly. Since they use light instead of sound/vibrations.
Ollie2 said:
I have recently got an S21 Exynos version and the fingerprint reader is useless.
I have the standard screen protector it came with on it and have tried training it multiple times and even doing the same finger more than once and the best I get is sometimes it works 80% of the time and then at other times of the day it'll fail 100%.
I'm not sure if it depends on if my hands are cold or warm and looking at my fingers my fingerprints don't look particularly pronounced but as it stands the phone may as well not have a fingerprint scanner.
Previous phones with dedicated fingerprint sensors have been better but never perfect.
Is this just me or do others have lots of problems too?
Click to expand...
Click to collapse
I've switched from my trusty old Oneplus 5T to the S21 Exynos version, and I'm seriously regretting it. The fingerprint sensor is useless with or without a screen protector, and with Settings -> Display -> Touch Sensitivity turned on. I've deleted all fingerprints and rescanned them in multiple times (obviously after removing/applying a screen protector) and nothing works.
Demarchist said:
I've switched from my trusty old Oneplus 5T to the S21 Exynos version, and I'm seriously regretting it. The fingerprint sensor is useless with or without a screen protector, and with Settings -> Display -> Touch Sensitivity turned on. I've deleted all fingerprints and rescanned them in multiple times (obviously after removing/applying a screen protector) and nothing works.
Click to expand...
Click to collapse
I've gone back to thin film for the display. It will not provide any drop protection but this way the fingerprint works of the time. Like it does without the protector. First time in many many years I'm skipping glass protection. I actively avoid curved displays and one reason for that is the glass protectors are horrible compared to flat display protectors.
I don't have any kind of screen on my S21 and so far (only had it a couple of days) the fingerprint sensor has been pretty reliable. I've even almost got to the point where I can wake up the phone by putting my finger in the right spot about 50% of them time (other times I need to tap the screen so it will show me where to put my finger).
11-9-2021 - RETURNING DEVICE
I’ve given it some time to try screen different screen protectors but the nail in the coffin for me is Googles response to how bad the fingerprint scanner is. I can’t accept that as a answer with no foreseeable fixes or updates.
*****************************************
Tempered glass on and off....I've tried all the tips and tricks floating around from Google and YouTubers. The fingerprint scanner just seems to be bad all together. About 4/5 out of 10 times it recognizes my finger. When it does it's super slow.
A update went out last night that people are saying solved the issue...…It has not.
How have you dealt with or solved the issue at hand?
So far no problem with my fingerprint scanner.
One thing you could try (if you haven't done that already) is to make multiple scans for the same finger.
I made 2 for my right thumb, 2 for my right index finger and 1 for my left thumb. So far no problems... Hope that it will get better for you soon
I hate to be that guy, but my fp scanner is flawless on the Pixel 6 (at least as snappy as the OP6T was). Keep in mind, I don't use a screen protector.
phaino00 said:
I hate to be that guy, but my fp scanner is flawless on the Pixel 6 (at least as snappy as the OP6T was). Keep in mind, I don't use a screen protector.
Click to expand...
Click to collapse
I've no issues with it either also coming from OP6T. Registered prints twice and made sure to scan different areas including edges. Works perfectly and is quick enough for me
No issues on my end. I have a cheap screen protector on to. It's slow but it's been working. And I have the driest hands ever.
I've got a screen protector on and it always reads my index finger 100% since day 1.
But initially it read my thumb only 50% of the time, until I figured out that setting up prints initially makes all the difference.
Even before the November OTA fix (which I sideloaded as it was not coming through as OTA), I got it working.
Now its's almost as nice as on my 4a(5G) which is 100% accurate.
Here's a Link to my method.
I am using the ivoler tempered glass screen protector and I can never get the fingerprint reader to work.
If you have a functional finger print reader and using a screen protector, what brand is it?
i'm using tempered glass and can't get it to read. thinking about taking it off.
v said:
I've got a screen protector on and it reads my index finger 100%.
It does however read my thumb only 50% of the time.
Click to expand...
Click to collapse
Which screen protector do you have?
Have those using screen protectors switched on this setting?
charlieb620 said:
Tempered glass on and off....I've tried all the tips and tricks floating around from Google and YouTubers. The fingerprint scanner just seems to be bad all together. About 4/5 out of 10 times it recognizes my finger. When it does it's super slow.
A update went out last night that people are saying solved the issue...…It has not.
How have you dealt with or solved the issue at hand?
Click to expand...
Click to collapse
I had the same issues. The update didn't improve things either. I then had to factory reset (for other reasons) and FP reading is now running really well. This is with the 'difficult' spigen glass align master protector. Have yet to test it in daylight though and suspect it won't work quite as well.
After reading through everyone's post....didn't want to quote everyone but:
-Registered every angle of my finger whether thumb or index. 2 registered per same finger.
-Turned on Sensitive Touch or whatever it's called for Screen Protectors
-Turned Always on Display on to keep the fingerprint there without double tap
-Removed Screen Protector
-Updated phone
I'm also using ivoler tempered glass.
Don't think I'm missing anything else.
Only thing left to do that I saw someone did was go a Factory Reset.
silverkin said:
Which screen protector do you have?
Click to expand...
Click to collapse
TOCOL 6 Stück Schutzfolie...
TOCOL 3+3 Stück Schutzfolie kompatibel mit Google Pixel 6 Panzerglas 3 Stück,3 Stück Kamera Panzerglas 9H Panzerglasfolie Positionierungsrahmen Blasenfrei Displayschutzfolie: Amazon.de: Elektronik & Foto
TOCOL 3+3 Stück Schutzfolie kompatibel mit Google Pixel 6 Panzerglas 3 Stück,3 Stück Kamera Panzerglas 9H Panzerglasfolie Positionierungsrahmen Blasenfrei Displayschutzfolie: Amazon.de: Elektronik & Foto
www.amazon.de
mitchst2 said:
Have those using screen protectors switched on this setting?
Click to expand...
Click to collapse
yep already tried that. had the phone since Tue and the day 1 update did nothing
I believe that people are struggling with the fingerprint reader.
That being said, I have had no issues with my P6. I don't have a screen protector on it. It reads my finger print 90-95% of the time when I press and hold my finger on the scanner until it unlocks (about 1 second). I've never had a in-screen reader, but it is certainly not a "tap the finger" on the reader like some phones are. If you are coming from an ultrasonic reader, you will have to reteach yourself to "touch and hold."
It reads my thumb too just fine. Be sure to watch how your thumb typically hits the sensor (for me it is more of the side of the thumb when I am holding the phone in one hand) and be sure to emphasis that area of the thumb when setting it up - but be sure to scan the entire finger/thumb too.
I've only saved my left thumb and right index finger once each (there are only "two fingerprints added" on my phone right now and everything works very reliably with either finger.
sic0048 said:
I believe that people are struggling with the fingerprint reader.
That being said, I have had no issues with my P6. I don't have a screen protector on it. It reads my finger print 90-95% of the time when I press and hold my finger on the scanner until it unlocks (about 1 second). I've never had a in-screen reader, but it is certainly not a "tap the finger" on the reader like some phones are. If you are coming from an ultrasonic reader, you will have to reteach yourself to "touch and hold."
It reads my thumb too just fine. Be sure to watch how your thumb typically hits the sensor (for me it is more of the side of the thumb when I am holding the phone in one hand) and be sure to emphasis that area of the thumb when setting it up - but be sure to scan the entire finger/thumb too.
I've only saved my left thumb and right index finger once each (there are only "two fingerprints added" on my phone right now and everything works very reliably with either finger.
Click to expand...
Click to collapse
That's great, but I prefer a screen protector.
Tool Belt said:
That's great, but I prefer a screen protector.
Click to expand...
Click to collapse
I agree. I normally put a screen protector on my phones as soon as I get them. However, I think we are just going to have to wait to see what works with the optical fingerprint scanner and what doesn't. This isn't just a P6 issue however. Tempered glass protectors (my go to choice previously) are unfortunately notoriously bad with optical scanners.
sic0048 said:
I agree. I normally put a screen protector on my phones as soon as I get them. However, I think we are just going to have to wait to see what works with the optical fingerprint scanner and what doesn't. This isn't just a P6 issue however. Tempered glass protectors (my go to choice previously) are unfortunately notoriously bad with optical scanners.
Click to expand...
Click to collapse
I agree, but at this time I will get frustrated with the phone and hope the screen protector works if and when I drop it.
I've had tempered glass screen protectors on optic in screen scanners. This could be a simple case of trial and error. I have more protectors coming in to see. I also have 10 days left to return this device if nothing solves the issue. Taking the screen protector off is out of the question.
The fingerprint scanner is by far my the worst thing on this phone. It's just as bad as the one on my Galaxy tab s7+. But I'm sure it can be fixed with an update. It's just ridiculously slow.
I was about to send my Pixel 6 back to Google.
The FPS recognition rate was poor compared to the Pixel 4a (5G).
I had tried multiple scans of the same finger, but it didn't really work.
In particular, the right thumb was rarely recognized to unlock.
When I initially scanned my fingers, the sensor was already having problems recognizing the respective finger.
After almost two weeks of unlocking frustration, I had an idea how it could work better.
Yes, it worked right away. The learning process was done very quickly and the recognition now works flawlessly.
Most notable despite installed armored glass!
So this is how it worked for me:
1. In Settings switch on better touch sensitivity.
2. Clean display (or protective film) in the sensor area
3. In Settings + add fingerprint
4. Briefly wipe the forehead with your finger (in order to picking up a little skin fat and thus making the imprint more visible to the sensor during the learning process.)
5. Follow the instructions on the screen carefully.
Thanks to the skin fat method, teaching was done much faster and with fewer attempts, and unlocking now works - despite the protective glass - super fast and 100% reliable.
I hope it works for you as well as it does for me.
If so, please comment or click Like below this post so we can get an impression that my sensor training today was no coincidence.
Oh yes: I even degreased my fingers with isopropanol. The recognition rate was still without a glitch.
Worked great for me even with very cheap unknown brand glass protector. Thank you.
Interesting. I've followed instructions and will report back.
Ha! I've never had an issue -- but then again I use a moisturizer.
Sounds logical. I always felt, that a slightly moist finger gets recognized better on any optical and ultrasound fingerprint reader.
Yes, however not perfectly intuitive that the issue is the initial setup of the prints.
I'm really surprised how nicely unlock works now. I have 100% recognition and it's almost instantaneous.
there was an app update in the PlayStore from Android system intelligence. After that, the recognition for me is now great.
Google should ship phones with a small bottle of moisturizer.
We need to upgrade our fingers to "smart fingers" which automatically adjust to the correct moisture level for Google's FP scanners.
I surely hope they fix the worst of it through a system update.
chaimav said:
Google should ship phones with a small bottle of moisturizer.
Click to expand...
Click to collapse
...or we purchase Apple iSlime 13 Pro 2021 for $25. You can always remove it by using $19 Apple Cloth Micro.
derausgewanderte said:
We need to upgrade our fingers ...
...hope they fix the worst of it through a system update.
Click to expand...
Click to collapse
Das nenne ich mal Sinn für Humor.
Tested with this screen protector and it works very fine
https://www.amazon.fr/gp/product/B094QXJGMD
chaimav said:
Google should ship phones with a small bottle of moisturizer.
Click to expand...
Click to collapse
Or even better: A batch of compatible fingers.
I use this screen protector fingerprint works great for me. Also it feels a lot like glass in use. Easy installation as well.
Amazon.com
Whats funny is I bought a similar one from rhinoshield that was more expensive and this one works way better. Fingerprint performance was bad with the rhinoshield one. This one works perfect every time.
This one is working great for me. unlock with FP each time
[2+3 Pack] LϟK Compatible for Google Pixel 6 6.4 inch [Not for Pixel 6 Pro 6.7 inch], 2 Pack Tempered Glass Screen Protector + 3 Pack Camera Lens Protector, Easy Installation Tray, HD Clear https://www.amazon.com/dp/B095YTTR3...abc_A4D6B2P8DC3RDGY6A8ND?_encoding=UTF8&psc=1
v said:
I was about to send my Pixel 6 back to Google.
The FPS recognition rate was poor compared to the Pixel 4a (5G).
I had tried multiple scans of the same finger, but it didn't really work.
In particular, the right thumb was rarely recognized to unlock.
When I initially scanned my fingers, the sensor was already having problems recognizing the respective finger.
After almost two weeks of unlocking frustration, I had an idea how it could work better.
Yes, it worked right away. The learning process was done very quickly and the recognition now works flawlessly.
Most notable despite installed armored glass!
So this is how it worked for me:
1. In Settings switch on better touch sensitivity.
2. Clean display (or protective film) in the sensor area
3. In Settings + add fingerprint
4. Briefly wipe the forehead with your finger (in order to picking up a little skin fat and thus making the imprint more visible to the sensor during the learning process.)
5. Follow the instructions on the screen carefully.
Thanks to the skin fat method, teaching was done much faster and with fewer attempts, and unlocking now works - despite the protective glass - super fast and 100% reliable.
I hope it works for you as well as it does for me.
If so, please comment or click Like below this post so we can get an impression that my sensor training today was no coincidence.
Oh yes: I even degreased my fingers with isopropanol. The recognition rate was still without a glitch.
Click to expand...
Click to collapse
Wow! This really works. Amazing. Google should include these instructions in the box.
Glad it works for you. Thank you!
Hi
v said:
Glad it works for you. Thank you!
Click to expand...
Click to collapse
Hi
Does your method work with dry hands too?
Thanks!
I've got dry hands and the method works for me.
Think about it:
How is the device supposed to be recognizing a print properly, if it never had the chance to learn it properly in the first place?
Sunday night updated to the Jan security update on the Pixel 6. Prior to that, the finger print reader was working (but barely). I got distracted and forgot to check how the fingerprint recognition was working. The next day, forgot completely about the update and installed the Whitestone dome protector (which went mostly good but I've got three small bubbles, but that's another story).
After installing the dome, they recommend retraining the reader. However, even after training with multiple fingers, the reader, very, very rarely works probably less than 1% of the time if even that. Any ideas what I could try to improve the accuracy? The January update seems to have improved accuracy for most people. I just wish I had tested out the January update more thoroughly before adding the screen protector.
I bought the Dome glass,too. After replace it with the old glass protection the fingerprint was worse than before.
I trained the new, but not better.
What helped for me was to train the FPS again with more pressure of the finger on the FPS. Now it's working almost like the old protection.
Seosam said:
I bought the Dome glass,too. After replace it with the old glass protection the fingerprint was worse than before.
I trained the new, but not better.
What helped for me was to train the FPS again with more pressure of the finger on the FPS. Now it's working almost like the old protection.
Click to expand...
Click to collapse
Do you have to apply more pressure when logging in also or just for the training?
mrlad said:
Do you have to apply more pressure when logging in also or just for the training?
Click to expand...
Click to collapse
Just for the training.
Did you enable 'increase touch sensitivity'?
chaimav said:
Did you enable 'increase touch sensitivity'?
Click to expand...
Click to collapse
No, I never activated it...
I just installed the Whitestone Dome yesterday. My fingerprint seemed to work the same but I went ahead and did a retrain. I think it is still close to without it (WD) except for 1 finger. I had an issue with that same finger on my old OP6T. Good Luck.
I also installed yesterday Whitestone Dome, the fingerprint reader works just like before almost every time. I never had any problems with the FPR, it only failed when I lifted the thumb to early. I did not retrain my thumb, increased Touch sensivity is still disabled. I don't know if it matters, but 4 finger profiles are my thumb.
Seosam said:
No, I never activated it...
Click to expand...
Click to collapse
Try enabling it. It's a toggle switch under Settings > Display.
chaimav said:
Did you enable 'increase touch sensitivity'?
Click to expand...
Click to collapse
Yes, I did enable the 'increase touch sensitivity' but that hasn't helped.
IdroogI said:
I also installed yesterday Whitestone Dome, the fingerprint reader works just like before almost every time. I never had any problems with the FPR, it only failed when I lifted the thumb to early. I did not retrain my thumb, increased Touch sensivity is still disabled. I don't know if it matters, but 4 finger profiles are my thumb.
Click to expand...
Click to collapse
I tried doing 4 finger profiles of the thumb but that didn't help either.
Does anyone one know if training indoors, does lighting impact the accuracy of recognition?
I did a quick search and found these other threads on the P6 finger print issue.
There are few more if anyone wants to do a little research.
Pixel 6 fingerprint sensor calibration
Hi, I had to replace my pixel 6 display and the fingerprint sensor with it. When I went on to calibrate the sensor with Google's calibration software, it says "Couldn't find the unique calibration software for this device" after trying to...
forum.xda-developers.com
EDITED: December update - screen protectors still interfere with the fingerprint reader
Note: I have edited the subject line to reflect the latest data I have. See post #3 below. It appears that the Tocol screen protector, which many reviews said does not interfere with the fingerprint reader, is the actual culprit...
forum.xda-developers.com
Fingerprint + Screen protector
I know that i'm many out of thousands but i can't find anything related to my problem, so i got a pixel 6 and i just got a screenprotector from tauri, fingerprint worked fine before untill i placed the screen protector. i just enrolled my...
forum.xda-developers.com
Is there a tempered glass screen protector that works with the finger print scanner?
Anyone have any luck with getting a tempered glass screen protector that works with the fingerprint scanner? I have read several threads about this. Some suggest adding same finger twice. Some suggest increasing sensitivity of the screen, and...
forum.xda-developers.com
The best tip for getting it work I have seen is to use hand lotion. It really struggles with dry skin
Hi all,
As many other Pixel 6 users I was struggling with FP sensor in inconsistency - failed unlocks mostly. I did worked a bit better without screen protector, but my personal experience tells me I need one, so the struggle continued.
Today I've made yet another attempt to re-scan my finger hoping to improve the experience and then I've noticed that the sensor seems to work way better if I place my finger 2-3 mm below what I would call centered over the icon on the screen.
No I wonder - is is just me + wishful thinking or maybe there is slight misaligned between the icon on the screen an actual position of the scanner. Any thoughts?
a.
Weirdly, it works on the bottom half of the FPS scanner icon, and not the top one, so it might be that the sensor is a little bellow the indicator
So it's not just me and my pixel. Nice
You should have posted in reddit instead
You might be right, but I don't use Reddit. Hope whoever might want to try this he would eventually find this thread.
It works well for me, you need to install certified only screen proyectors
Agreed, the FP issue is negligible without screen protector, it a slow yet solid scanner.
I've checked Google's list of certified screen protectors and pretty much all of these get some negative reviews from users. Not to mention all either not available or out of stock in EU.
Currently I'm using Spigen glass, not on the Google's list, but works fairly well.
As I wrote in my first post moving the finger slightly lower on the screen seems to help a lot.
Interesting observation about finger placement and sensor alignment. I'll definitely experiment with that.
I was cussing the fingerprint sensor up until March. It couldn't even enroll let alone unlock. Long, tedious story shortened... Since March after clean flashing the factory image the sensor improved a lot along with solving other screen related problems. My best enrollment results were with warm and clammy fingers from gripping a mug of hot coffee. As it is now only one finger out of four consistently unlocks, but that could just be me. Or placement. With that one finger I'm getting acceptable results with a cheap 9H screen protector (3-pack for $9) and default screen sensitivity. A screen protector 1-pack in the $25-40 range aint gonna happen.
ender2180 said:
Agreed, the FP issue is negligible without screen protector, it a slow yet solid scanner.
I've checked Google's list of certified screen protectors and pretty much all of these get some negative reviews from users. Not to mention all either not available or out of stock in EU.
Currently I'm using Spigen glass, not on the Google's list, but works fairly well.
As I wrote in my first post moving the finger slightly lower on the screen seems to help a lot.
Click to expand...
Click to collapse
I'm using my P6 without screen protector, and it is very slow and inaccurate for me. For reference, I'm coming from S21 and it's instantaneous and very precise.
What did it for me was that i ignored the instructions completely and did my own routine. for example, i never rolled my finger over the screen. instead i did both sides of the fingerprint just pressing multiple times and on slightly different angles.
Hamid Chikh said:
I'm using my P6 without screen protector, and it is very slow and inaccurate for me. For reference, I'm coming from S21 and it's instantaneous and very precise.
Click to expand...
Click to collapse
Different sensor tech
DMart9406 said:
Different sensor tech
Click to expand...
Click to collapse
I know it's a different technology, but it's been around for a while now, since S10 (2019) and it only got better with time, so i can't figure out how and why did google skip it for its supposed "the google phone flagship"
Hamid Chikh said:
I know it's a different technology, but it's been around for a while now, since S10 (2019) and it only got better with time, so i can't figure out how and why did google skip it for its supposed "the google phone flagship"
Click to expand...
Click to collapse
I agree, it is a bummer. For last few years I was mostly using IOS and got used to authentication being seamless. My last Android was Pixel 2 and I admit - I've missed the experience. FP sensor is giving me some hard time, but I'm super happy with my P6. It will stay with me for longer no doubt.
I did some more testing, retraining etc. and I feel my initial thoughts are not accurate. The reason why I believed the scanner is positioned slightly below the icon on the screen was most probably due to the part of my finger that got scanned the best.
It might be due to the security reasons Google mentioned on the blog, it might also be a smaller and less accurate scanner used in P6/P6P. The outcome stays the same - you need to be very precise while registering your finger print and train your muscle memory to place your finger accurately on the screen.
The scanner on the back of the phone like to the one in Pixel 5 is not only using different tech, but it also makes obvious to a user where to put the finger. Pixel 6 makes it a bit harder, but that's about it.
With a deliberate finger positioning and some practice you can be pretty happy with FP scanner on Pixel 6.
Hi. I got a solution from this xda forum (sorry I don't have the link) but it basically resolved my fingerprint hit-miss issue. Ideally it involved:
1. Remove all the fingerprint images 8 previously made and starting afresh.
2. After removing, before registering new finger prints, first rub the thumb / finger I wanted to register on my forehead so that it collects a good amount of face-oil. Apparently the fingerprint registers well when registering the finger with an oily finger (I refer to the face oil...I have no evidence that other oils work).
3. After a good rub of the finger on your face you now go about registering the finger(s). Suggestion is to register each finger at least 2 times.
When you try using the fingerprint scanner it will work well. You may have to press in a bit (not so much) but this works pretty well.