Hello
Last week I became my Star x26i. Its quite a very good phone, but because of WiFi and Battery issues i tried to update it to a newer version, like in this tutorial :
http://forum.xda-developers.com/showthread.php?t=1680338
So I used a program, calles SPmultiPortFlashDownloadProject
Everything went fine, but after the program erased the emmc Windows tried to install a new driver and failed. The program stopped and now the phone cant boot anymore (understandable with an formatted eemc...) The Pc detects the phone anyway, first as an unknown device and after installing a new chipset driver as "MediaTek DA USB VCOM Port (COM6)" If I try to reflash with the same program it gives me following issue like on this picture: http://imageshack.us/f/856/erroroly.png/ (Error: No Bootrom USB Port was found! COM6 is not a Bootrom (preloader) USB Port. Auto polling Number0.
Are there any Chances to rescue this device or is it totally bricked? Thanks in advance...
The thing is, I am having trouble flashing the Stock ROM to my Lenovo A1000G as it has been dead and it doesn't turn on anymore.
I have installed MTK / MediaTEK drivers (After reading multiple threads and guides over the internet) and I have installed these 3 specifically -
1) MediaTek DA USB VCOM Port
2) MediaTek PreLoader USB VCOM Port
3) MTK USB Port
But the thing is whenever I try to plugin the device to the Computer pressing the Vol (-) button - it shows up in the Ports section as MediaTek DA USB VCOM (Android). Now since it is appearing like that, I cannot flash or do anything in general. Because the device is getting detected by the PC but the one that shows up in the port is showing up as the wrong one. It should have showed up as MediaTek PreLoader USB VCOM Port but it isn't happening like that. I have tried so many variations to install drivers / uninstall it. It just doesn't work.
Can someone please help, since I don't have much knowledge. I do have the Stock ROM ready and the device is probably hard bricked, so can't install drivers using the Pdanet method. So what can I do?
No help? Please someone. Bump
__PUMA__ said:
The thing is, I am having trouble flashing the Stock ROM to my Lenovo A1000G as it has been dead and it doesn't turn on anymore.
I have installed MTK / MediaTEK drivers (After reading multiple threads and guides over the internet) and I have installed these 3 specifically -
1) MediaTek DA USB VCOM Port
2) MediaTek PreLoader USB VCOM Port
3) MTK USB Port
But the thing is whenever I try to plugin the device to the Computer pressing the Vol (-) button - it shows up in the Ports section as MediaTek DA USB VCOM (Android). Now since it is appearing like that, I cannot flash or do anything in general. Because the device is getting detected by the PC but the one that shows up in the port is showing up as the wrong one. It should have showed up as MediaTek PreLoader USB VCOM Port but it isn't happening like that. I have tried so many variations to install drivers / uninstall it. It just doesn't work.
Can someone please help, since I don't have much knowledge. I do have the Stock ROM ready and the device is probably hard bricked, so can't install drivers using the Pdanet method. So what can I do?
Click to expand...
Click to collapse
I understand you are worried but please don't create duplicate threads and only bump once every 24 hours
Regards
Sawdoctor
Hi.
1. I bricked my device many, many times. But never so hard. This time I can't revive it.
2. Yes, I checked every solutions, guides etc. Actually there are two guides, rest are only variations.
3. Yes, I tried many times every solution, tried to push other combinations with buttons, tried open computer apps as a supervisor and a normal user. For nothing.
What is the problem?
X820 is completely blind and deaf. I turned it off (force, power button) during the boot animation.
No ROM, no TWRP, no fastboot and - important - no diode (blue, red - whatever). Completely bricked.
After USB connecting my PC sees it as a Qualcomm HS-USB QDLoader 9008 (COM4).
That's it.
I tried yesterday and today many guides. I red:
https://forum.xda-developers.com/le-max-2/help/help-bricked-phone-t3707045
https://forum.xda-developers.com/le-2/how-to/repair-hard-bricked-phone-x52x-sd-t3648348
https://forum.xda-developers.com/le...k-fix-files-qfil-le-max-2-x820-t3423668/page2
https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949
https://www.gizmochina.com/2016/11/20/leeco-x820-max-2-super-unbrick-guide/
and few instructions from YouTube.
If the only way is FlashOne (version 1.9), every time I had a similar result: error after unzip (I tried 4 other ROMs). Problem with finding this or that file, but everytime problem in the same moment.
I tried turn off the device by: power button, power + Vol- and turn it on by: power, power + Vol+, power + Vol+ + Vol- (both). No difference (actually I heard if my device is on or off).
I really need working my own X820.
And I offer 25 euro if You can help me "step by step".
can you enter Qfile mode (Qualcomm HS-USB QDLoader 9008 (COM4))?
if yes, you need to check again with the FLASHONE program and the files of FlashOne (version 1.9), I remember there was version 1.8
AhmadSant said:
can you enter Qfile mode (Qualcomm HS-USB QDLoader 9008 (COM4))?
if yes, you need to check again with the FLASHONE program and the files of FlashOne (version 1.9), I remember there was version 1.8
Click to expand...
Click to collapse
Hi.
What do You mean "enter Qfile mode"?
When I connect the phone to PC with cable, PC usually sees my device as Qualcomm HS-USB QDLoader 9008 (COM4).
Sometimes as an unknown device. But nothing more.
Try this if pc detects your phone as Qualcomm HS-USB QDLoader https://drive.google.com/file/d/0B8In_WJch-UvQ3RtOGstbXdqUWs/view?usp=drivesdk
https://drive.google.com/file/d/0B8In_WJch-Uvb0xBbnBtbTlISDg/view?usp=drivesdk
If drivers error , install drivers manually
if your pc detects your phone as Qualcomm HS-USB QDLoader, then it is okay , it is just problem of the flashOne and recovery rom that u are using. Please check again.
pm me
i can slove this problem
pranjalm said:
Try this if pc detects your phone as Qualcomm HS-USB QDLoader https://drive.google.com/file/d/0B8In_WJch-UvQ3RtOGstbXdqUWs/view?usp=drivesdk
https://drive.google.com/file/d/0B8In_WJch-Uvb0xBbnBtbTlISDg/view?usp=drivesdk
If drivers error , install drivers manually
Click to expand...
Click to collapse
Thanks, but I tried FlashOne at least 10 times. 4 other ROMs and I always had some error after unzip.
Maybe you should try a different laptop. The method should work. Are you referring to "unzip error" as an error in flashone or are you trying to unzip the qfil file? Be more specific if it's flashone error.
Hey try this its for le2 but the process is similar
youtube.com/watch?v=iN9Ce3hKlRA
you can also try QPST and Mi flashtool
Hi again.
After few hours on other PC: failed.
I tried:
- two other drivers packs,
- FlashOne 1.9 (I didn't find 1.8 and 2.0 didn't work),
- four other ROMs (Qfil), probably 2 other (and 4 different names).
FlashOne opened as a supervisor and normal.
And I had always errors like this:
17:40:41: ERROR: function: sahara_rx_data:194 Unable to read packet header. Only read 0 bytes.
17:40:41: ERROR: function: sahara_main:854 Sahara protocol error
17:40:41: ERROR: function: main:265 Uploading Image using Sahara protocol failed
Download Fail:Sahara Fail:QSaharaServer Failrocess fail
Finish Download
So still nothing.
Do You have other ideas?
https://forum.xda-developers.com/zuk-z2-pro/how-to/howto-flash-stock-rom-t3435109
Try what the guys on the first page are suggesting, it might work. Also download the qfil that it's mentioned in the unbrick post in guides section, I should have uploaded it on mega and drive. That's 14s. The name should be without space when you save it, e.g.: Qfil_14s_Le_Max2.
You should not give up as you're on the right track. Phone is seen as Qualcomm 9008 (COM...). Try a different cable, different USB ports, a different computer again, maybe one with USB 2.0.
Even I experienced dsame problem but was able to revive my le max 2 by below mentioned guide.
Few important tips-
1. Place flash one in C drive
2. Press vol up, vol down & power button simultaneously before connecting d phone to PC.
3. Even if download fails, try 3-4 times & u vl succeed.
https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949
adityatiple said:
Even I experienced dsame problem but was able to revive my le max 2 by below mentioned guide.
Few important tips-
1. Place flash one in C drive
2. Press vol up, vol down & power button simultaneously before connecting d phone to PC.
3. Even if download fails, try 3-4 times & u vl succeed.
https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949
Click to expand...
Click to collapse
Thanks.
After 3 days it is time to stop.
No success.
2 PCs, 3 cables, 5 USB ports, dozens tries. And nothing.
Now I have to check somehow if the motherboard is OK.
For now thank You all. The best phone I ever had still dead.
All d best
MoRiA Cheo said:
Thanks.
After 3 days it is time to stop.
No success.
2 PCs, 3 cables, 5 USB ports, dozens tries. And nothing.
Now I have to check somehow if the motherboard is OK.
For now thank You all. The best phone I ever had still dead.
Click to expand...
Click to collapse
I wish u all d best
can you enter recovery mode?i have brick my x820 can repair using adb in recorvery
This is silly but maybe it helps... I had problems trying to flash my phone and the problem was the computer it was a 32bit computer so i switched to a 64bit one and it worked like a charm. Good luck
dylanmusik said:
can you enter recovery mode?i have brick my x820 can repair using adb in recorvery
Click to expand...
Click to collapse
No.
Nothing.
Absolutely none of lights on screen. And no LED.
It looks like dead. Only PC sees its as a Qualcomm... etc.
Help, Oneplus 5 hard bricked
The device only stays at OP powered by android logo and can enter fastboot mode but is of no use since bootloader is not unlocked and OEM unlock was not enabled.
So i was trying to find a solution and found this threat :
https://forum.xda-developers.com/oneplus-5/how-to/guide-unbrick-guide-hard-bricked-t3761706
So i downloaded all OOS files and when I thought I'm Finally done, Found out that my device is not recognised by the computer.
It only shows up as Unknown usb device under (Universal Serial Bus controllers) section
I tried installing qualcom driver from official website But still no luck
i tried installing .inf x64 manually I get a error stating the folder you specified does not contain a specific ..bla... bla ....
Please help me get my phone recognized :crying:
Hello,
I am left with a OPX with no ROM, and no bootloader (after trying to upgrade TWRP). It shows the Oneplus icon, and Fastboot mode works.
I'm trying to access the device through adb or fastboot, but my computers can't detect nothing.
I installed Qualcomm drivers, ADB & Fastboot, Oneplus USB drivers. I tried to connect my OPX with Fastboot, and with "volume up" plugging (as shown in the mega unbrick guide), nothing shows up in the device manager.
What can I do ?
Thank you very much.
NOTE : I was not in developer mode on the last ROM installed ...
Since fastboot works it seems that your PC or maybe the conection might be the problem here.
Have you tried different cables, USB ports, different computers or different Operating Systems?
Could your MicroUSB Port be broken?
( You could give Ubuntu a shot. It might take a little time to install, but it's free and if you can save your phone with it it could be worth the time. You can also unbrick your device under Linux once you successfully connect it in EDL mode. )