Please help my Moto E XT1022 is hard bricked. I can't enter bootloader mode or even turn on. I need Moto E XT1022 qboot utility (flash blank) zip to enter bootloader mode
I downloaded from this thread but it seems the user has uploaded Moto G's qboot utility but I need Moto E XT1022 qboot utility
forum.xda-developers.com/moto-e/development/unbrick-hard-bricked-moto-e-t2974093
Sabarivelan said:
Please help my Moto E XT1022 is hard bricked. I can't enter bootloader mode or even turn on. I need Moto E XT1022 qboot utility (flash blank) zip to enter bootloader mode
I downloaded from this thread but it seems the user has uploaded Moto G's qboot utility but I need Moto E XT1022 qboot utility
forum.xda-developers.com/moto-e/development/unbrick-hard-bricked-moto-e-t2974093
Click to expand...
Click to collapse
do you solve your problem.cause i m having the same as yours
i have the same issue
myownway.1991 said:
do you solve your problem.cause i m having the same as yours
Click to expand...
Click to collapse
i tried to use motorola qboot utility but i get this:
C:\restore moto e\New folder\blankflash>.\qboot.exe blank-flash
opening device: \\.\COM11
OKAY [ 0.002s]
greeting device for command mode
OKAY [ 0.002s]
identifying device
...serial = 0x3BAEE53
...chip-id = 0x811
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.005s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.003s]
validating files
OKAY [ 0.001s]
switching to download mode
OKAY [ 0.001s]
greeting device for image downloading
OKAY [ 0.002s]
sending programmer
OKAY [ 0.016s]
flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet)
C:\restore moto e\New folder\blankflash>pause
Press any key to continue . . .
super1985 said:
i tried to use motorola qboot utility but i get this:
C:\restore moto e\New folder\blankflash>.\qboot.exe blank-flash
opening device: \\.\COM11
OKAY [ 0.002s]
greeting device for command mode
OKAY [ 0.002s]
identifying device
...serial = 0x3BAEE53
...chip-id = 0x811
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.005s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.003s]
validating files
OKAY [ 0.001s]
switching to download mode
OKAY [ 0.001s]
greeting device for image downloading
OKAY [ 0.002s]
sending programmer
OKAY [ 0.016s]
flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet)
C:\restore moto e\New folder\blankflash>pause
Press any key to continue . . .
Click to expand...
Click to collapse
did u get qboot utility of moto E?? i m having the same problem as yours. please help
i am also stuck at the qboot i need it for bootloader...so pls xda develpers must help because lot of them asking for it...if i go to the service center to fix it they ask for Rs.4000 to fix it..
I also has same issue, current qboot on the web is works with Moto G, If any has Qboot / Blankflash for MOTO E XT1022 please uplaod
Here it is..
PAHeartBeat said:
I also has same issue, current qboot on the web is works with Moto G, If any has Qboot / Blankflash for MOTO E XT1022 please uplaod
Click to expand...
Click to collapse
Not sure whether it will work or not but it is latest .
Previously i also had the same problem but fortunately my phone was in warranty and they replaced my motherboard for free. So i did not got any chance to test them. Try and report back. DO AT YOUR ON RISK, I WILL NOT BE RESPONSIBLE FOR ANYTHING. @PAHeartBeat
plz anyone upload blankflash for moto e......urgently needed guys !! my phone is dead and i dont have money to buy a new one
dude this is for moto g.....please uplload blankflash for moto e...it would be a great help
does any body got the solution to debrick the hard bricked moto e ?
Any updates on this issue? I too have a bricked moto e now. obviously out of warranty, Any idea how much mobo would cost////?
Looking for blank flash.
:crying::crying: same problem... plz help...
i too need blankflash for xt1022
i too need blank flash files for my hard bricked moto e.
here also same need blank flash.... as i searched there is no release moto e
Sabarivelan said:
Please help my Moto E XT1022 is hard bricked. I can't enter bootloader mode or even turn on. I need Moto E XT1022 qboot utility (flash blank) zip to enter bootloader mode
I downloaded from this thread but it seems the user has uploaded Moto G's qboot utility but I need Moto E XT1022 qboot utility
forum.xda-developers.com/moto-e/development/unbrick-hard-bricked-moto-e-t2974093
Click to expand...
Click to collapse
Same problem, did you solve?
same problem.. (
I Find a way!!!
BrandonCJesus said:
Same problem, did you solve?
Click to expand...
Click to collapse
Look for this in google "how to unbrick qualcomm devices"
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
I have not tried it yet. Any volunteer?
Need Moto E XT1022 qboot utility (flash blank) zip
myownway.1991 said:
do you solve your problem.cause i m having the same as yours
Click to expand...
Click to collapse
Error...:crying::crying::crying: To run The Blank Flash file...
Plzz Hepl
opening device: \\.\COM3
OKAY [ 0.002s]
greeting device for command mode
OKAY [ 0.001s]
identifying device
...serial = 0x39B73FB
...chip-id = 0x811
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.004s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.003s]
validating files
OKAY [ 0.001s]
switching to download mode
OKAY [ 0.001s]
greeting device for image downloading
OKAY [ 0.001s]
sending programmer
OKAY [ 0.012s]
flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet)
Noo... the same unresolved problem
the same unresolved problem
Nothing_work_for_me_can_anybody_suggest_how_i_repair_this_kind_of_problem?
< waiting for device >
opening device: \\.\COM5
OKAY [ 0.004s]
greeting device for command mode
OKAY [ 0.003s]
identifying device
...serial = 0x42BC4F8
...chip-id = 0x811
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.008s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.007s]
validating files
OKAY [ 0.001s]
switching to download mode
OKAY [ 0.001s]
greeting device for image downloading
OKAY [ 0.002s]
sending programmer
Unexpected packet: 4. Was expecting: 3
FAILED (blank-flash:sahara-transfer-image:send-image:unexpected packet)
there were something wrong in programmer.mbn file
is any one knows what programmer.mbn file contain .
i thought it contain qualcomm msm programmer code and some sdi.img file content.
before adding sdi file it cant start download but after adding some sdi content then phone goes to downloading image but has some packet problem .please help
Mine tooo.......
hiten7236 said:
< waiting for device >
opening device: \\.\COM5
OKAY [ 0.004s]
greeting device for command mode
OKAY [ 0.003s]
identifying device
...serial = 0x42BC4F8
...chip-id = 0x811
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.008s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.007s]
validating files
OKAY [ 0.001s]
switching to download mode
OKAY [ 0.001s]
greeting device for image downloading
OKAY [ 0.002s]
sending programmer
Unexpected packet: 4. Was expecting: 3
FAILED (blank-flash:sahara-transfer-image:send-image:unexpected packet)
there were something wrong in programmer.mbn file
is any one knows what programmer.mbn file contain .
i thought it contain qualcomm msm programmer code and some sdi.img file content.
before adding sdi file it cant start download but after adding some sdi content then phone goes to downloading image but has some packet problem .please help
Click to expand...
Click to collapse
Can u just upload the file in a zip which ur using...ill check that i may help u....
I have the same problem, I was constantly changing roms and never had this problem at most had a bootloop, but that was all. :crying:
I tried with Miflash, blankflash does not work, the only options that remain are to develop the missing files and / or find out who gave him solution for hardbrick moto X and moto G and ask him where he got those files or how made the files?
So, can you tell me... We need to find any solution, the problem is old, I realized when I read the forums and others.
My English is horrible, in fact I do not speak English, I speak Spanish, but I do understand some English
I'm new here
Harsh_1998 said:
Can u just upload the file in a zip which ur using...ill check that i may help u....
Click to expand...
Click to collapse
@Harsh_1998 I have a blankflash zip file but its a older version and I need a newer but Motorola isn't releasing blankflash zip file for Moto X Play and I found it myself and now my device got hard bricked can you see to it I need a blankflash for unbricking my device. Please help!!!!
Hi everyone,
I am having a problem to my moto G xt1032 which i recently updated through OTA. afetr I installed it dies. never turning on. but the led light will blink after i charge a few minutes. but never turn on.
Do anyone have an idea?
please help me.
I would really appreciate and commend.
thank you.
Firstly I flashed it with a xt1033 firmware 4.4.4 which has a dual sim flatform due to I cannot flash it with its own xt1032 firmware. maybe its a corrupt file.
After done flashing with xt1033, the phone work perfectly. it only happens after i recieved the system update from android system update
It is recognized by your PC ?
Sent from my SM-T116 using XDA Free mobile app
Soufiansky said:
It is recognized by your PC ?
Sent from my SM-T116 using XDA Free mobile app
Click to expand...
Click to collapse
Qualcomm HS-USB QDLoader 9008
on device manager
skripton78 said:
Qualcomm HS-USB QDLoader 9008
on device manager
Click to expand...
Click to collapse
Can you try to flash again the stock firmware ?
no display at all. i had try 2 and 15 minute method, even i tried removing and draining the electrons lift on the board no effects.
i cant put to recovery and fastboot mode. but the phone was detected as Qualcomm HS-USB QDLoader 9008. but commands is only waiting for device.
in short, dead.
skripton78 said:
Qualcomm HS-USB QDLoader 9008
on device manager
Click to expand...
Click to collapse
its bricked. you need blank flash files to flash the bootloader again, here try this http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
blank-flash
nk-flash
opening device: \\.\COM11
OKAY [ -0.000s]
greeting device for command mode
OKAY [ -0.000s]
identifying device
...serial = 0x485D868
...chip-id = 0x800 (MSM8226)
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ -0.000s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ -0.000s]
validating files
OKAY [ 0.080s]
switching to download mode
OKAY [ 0.010s]
greeting device for image downloading
OKAY [ 0.000s]
sending programmer
OKAY [ 0.010s]
flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:error reading packet)
C:\Users\khyrt klyetz\Downloads\Compressed\blankflash\blankflash>pause
Press any key to continue . . .
skripton78 said:
nk-flash
opening device: \\.\COM11
OKAY [ -0.000s]
greeting device for command mode
OKAY [ -0.000s]
identifying device
...serial = 0x485D868
...chip-id = 0x800 (MSM8226)
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ -0.000s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ -0.000s]
validating files
OKAY [ 0.080s]
switching to download mode
OKAY [ 0.010s]
greeting device for image downloading
OKAY [ 0.000s]
sending programmer
OKAY [ 0.010s]
flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:error reading packet)
C:\Users\khyrt klyetz\Downloads\Compressed\blankflash\blankflash>pause
Press any key to continue . . .
Click to expand...
Click to collapse
FYI : this is already unlocked : status code 3 last time i'd flashed the firmware.
skripton78 said:
FYI : this is already unlocked : status code 3 last time i'd flashed the firmware.
Click to expand...
Click to collapse
do anyone have? here.
.
.how to unbrick a bricked moto g6 plusThanks to @vache we can now flash a blankflash file to unbrick our devices.
Things you'll need:
Drivers
The blankflash zip
Stock ROM or a custom ROM
How to unbrick:
step 1: extract the blankflash.zip
step 2: run the blank-flash.bat file (or blank-flash.sh if you use Linux). Your phone should boot into fastboot now.
step 3: now you can flash your stock ROM (or TWRP and then a custom ROM).
ahmed.al said:
.
.how to unbrick a bricked moto g6 plusThanks to @vache we can now flash a blankflash file to unbrick our devices.
Things you'll need:
Drivers
The blankflash zip
Stock ROM or a custom ROM
How to unbrick:
step 1: extract the blankflash.zip
step 2: run the blank-flash.bat file (or blank-flash.sh if you use Linux). Your phone should boot into fastboot now.
step 3: now you can flash your stock ROM (or TWRP and then a custom ROM).
Click to expand...
Click to collapse
Dude, but my device does not even enter in Fastboot mode, because I switched the Slots from A to B, does it even work? I'll take the test soon and report here the results. Many thanks to you and everyone who helped to make this Thread
luiz_neto said:
Dude, but my device does not even enter in Fastboot mode, because I switched the Slots from A to B, does it even work? I'll take the test soon and report here the results. Many thanks to you and everyone who helped to make this Thread
Click to expand...
Click to collapse
Well, did it work for you?
ahmed.al said:
Well, did it work for you?
Click to expand...
Click to collapse
I haven't tested it, I'll test it tomorrow and leave the feedback here.
ahmed.al said:
.
.how to unbrick a bricked moto g6 plusThanks to @vache we can now flash a blankflash file to unbrick our devices.
Things you'll need:
Drivers
The blankflash zip
Stock ROM or a custom ROM
How to unbrick:
step 1: extract the blankflash.zip
step 2: run the blank-flash.bat file (or blank-flash.sh if you use Linux). Your phone should boot into fastboot now.
step 3: now you can flash your stock ROM (or TWRP and then a custom ROM).
Click to expand...
Click to collapse
Man, unfortunately it didn't work out. Shows this in CMD:
C:\Users\Neto\Desktop\[GUIA] Como fazer o Unbrick do Moto G6 Plus>.\qboot.exe blank-flash
Motorola qboot utility version 3.86
[ 0.000] Opening device: \\.\COM6
[ 0.000] Detecting device
[ 34.380] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 34.380] Check qboot_log.txt for more details
[ 34.380] Total time: 34.380s
FAILED: qb_flash_singleimage()->sahara_greet_device()->change_mode()->do_hello()->IO error
C:\Users\Neto\Desktop\[GUIA] Como fazer o Unbrick do Moto G6 Plus>pause
Log File details:
**** Log buffer [000001] 2018-05-14_10:59:17 ****
[ 0.000] Opening device: \\.\COM6
[ 0.000] Detecting device
[ 34.380] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 34.380] Check qboot_log.txt for more details
[ 34.380] Total time: 34.380s
[ 34.380]
[ 34.380] qboot version 3.86
[ 34.380]
[ 34.380] DEVICE {
[ 34.380] name = "\\.\COM6",
[ 34.380] flags = "0x64",
[ 34.380] addr = "0x62FD64",
[ 34.380] api.bnr = "0xEE2CB0",
[ 34.380] }
[ 34.380]
[ 34.380]
[ 34.380] Backup & Restore {
[ 34.380] num_entries = 0,
[ 34.380] restoring = "false",
[ 34.380] backup_error = "not started",
[ 34.380] restore_error = "not started",
[ 34.380] }
[ 34.380]
luiz_neto said:
Man, unfortunately it didn't work out. Shows this in CMD:
C:\Users\Neto\Desktop\[GUIA] Como fazer o Unbrick do Moto G6 Plus>.\qboot.exe blank-flash
Motorola qboot utility version 3.86
[ 0.000] Opening device: \\.\COM6
[ 0.000] Detecting device
[ 34.380] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 34.380] Check qboot_log.txt for more details
[ 34.380] Total time: 34.380s
FAILED: qb_flash_singleimage()->sahara_greet_device()->change_mode()->do_hello()->IO error
[ 34.380] }
[ 34.380]
Click to expand...
Click to collapse
Hmm, try the blankflash a few times - sometimes the blankflashes take several attempts to open a stable sahara connection to your device. Looking at the hex code of the included singleimage.bin, this blankflash is for SDM630 Motorola devices, though I don't know how new or old it is with regards to your bootloader .
Just asking, are you able to power off your device and try booting to the bootloader with the power/volume keys held down? I'm just curious as to how your device won't boot into the bootloader.
@luiz_neto try:
holding the power and volume down button for 2 minutes
an USB with more power
try it again and again and again (it doesn't usually work right away)
ahmed.al said:
@luiz_neto try:
holding the power and volume down button for 2 minutes
an USB with more power
try it again and again and again (it doesn't usually work right away)
Click to expand...
Click to collapse
I do not understand, hold the power button + volume down for 2 minutes and then run the blank-Flash or execute the blank-flash first to do the process? And what do you mean "an USB with more power"? I'm using the device's own USB cable.
---------- Post added at 03:46 PM ---------- Previous post was at 03:36 PM ----------
ahmed.al said:
@luiz_neto try:
holding the power and volume down button for 2 minutes
an USB with more power
try it again and again and again (it doesn't usually work right away)
Click to expand...
Click to collapse
Now i have in cmd:
C:\Users\Hermerson\Desktop\blankflash>.\qboot.exe blank-flash
Motorola qboot utility version 3.86
[ 0.000] Opening device: \\.\COM3
[ 0.016] Detecting device
[ 0.031] ...cpu.id = 172 (0xac)
[ 0.031] ...cpu.sn = 2641944531 (0x9d78dfd3)
[ 0.031] Opening singleimage
[ 0.172] Loading package
[ 0.203] ...filename = pkg.xml
[ 0.218] Loading programmer
[ 0.246] ...filename = programmer.elf
[ 0.246] Sending programmer
[ 0.324] ReadFile() failed, GetLastError()=0
[ 0.434] ReadFile() failed, GetLastError()=0
[ 0.965] Unexpected command, expecting 3 or 18 or 4, got 1 instead.
[ 0.965] ERROR: sahara_download()->general error
[ 0.965] Check qboot_log.txt for more details
[ 0.965] Total time: 0.965s
FAILED: qb_flash_singleimage()->sahara_download()->general error
C:\Users\Hermerson\Desktop\blankflash>pause
And in Log file:
**** Log buffer [000001] 2018-05-14_12:43:55 ****
[ 0.000] Opening device: \\.\COM3
[ 0.016] Detecting device
[ 0.016] ...cpu.id = 172 (0xac)
[ 0.016] ...cpu.sn = 2641944531 (0x9d78dfd3)
[ 0.016] Opening singleimage
[ 0.016] Loading package
[ 0.031] ...filename = pkg.xml
[ 0.031] Loading programmer
[ 0.031] ...filename = programmer.elf
[ 0.031] Sending programmer
[ 0.109] ReadFile() failed, GetLastError()=0
[ 0.218] ReadFile() failed, GetLastError()=0
[ 0.782] Unexpected command, expecting 3 or 18 or 4, got 1 instead.
[ 0.782] ERROR: sahara_download()->general error
[ 0.782] Check qboot_log.txt for more details
[ 0.798] Total time: 0.798s
[ 0.798]
[ 0.798] qboot version 3.86
[ 0.798]
[ 0.798] DEVICE {
[ 0.798] name = "\\.\COM3",
[ 0.798] flags = "0x64",
[ 0.798] addr = "0x22FD74",
[ 0.798] sahara.current_mode = "0",
[ 0.798] api.buffer = "0x16D0020",
[ 0.798] cpu.serial = "2641944531",
[ 0.798] cpu.id = "172",
[ 0.798] cpu.sv_sbl = "1",
[ 0.798] cpu.name = "SDM630",
[ 0.798] storage.type = "eMMC",
[ 0.798] sahara.programmer = "programmer.elf",
[ 0.798] api.bnr = "0x1629140",
[ 0.798] }
[ 0.798]
[ 0.798]
[ 0.798] Backup & Restore {
[ 0.798] num_entries = 0,
[ 0.798] restoring = "false",
[ 0.798] backup_error = "not started",
[ 0.798] restore_error = "not started",
[ 0.798] }
[ 0.798]
Try it again and again with a different pc or usb cable. It took Erfan 20 tries with 4 different PC’s.
Verzonden vanaf mijn iPhone met Tapatalk
luiz_neto said:
<snip>
Now i have in cmd:
C:\Users\Hermerson\Desktop\blankflash>.\qboot.exe blank-flash
Motorola qboot utility version 3.86
[ 0.000] Opening device: \\.\COM3
[ 0.016] Detecting device
[ 0.031] ...cpu.id = 172 (0xac)
[ 0.031] ...cpu.sn = 2641944531 (0x9d78dfd3)
[ 0.031] Opening singleimage
[ 0.172] Loading package
[ 0.203] ...filename = pkg.xml
[ 0.218] Loading programmer
[ 0.246] ...filename = programmer.elf
[ 0.246] Sending programmer
[ 0.324] ReadFile() failed, GetLastError()=0
[ 0.434] ReadFile() failed, GetLastError()=0
[ 0.965] Unexpected command, expecting 3 or 18 or 4, got 1 instead.
[ 0.965] ERROR: sahara_download()->general error
[ 0.965] Check qboot_log.txt for more details
[ 0.965] Total time: 0.965s
FAILED: <snip>
[ 0.798]
Click to expand...
Click to collapse
Hmm, so the blankflash does make contact with your device, establishes a connection and sends over the programmer to verify your device, but the programmer reports an incorrect response...
What happens if you try the blankflash again, do you get a different response? Seems you're getting closer. The power and volume key trick has been suggested: (credit to https://forum.xda-developers.com/moto-g4-plus/help/solved-unbrick-hard-bricked-dead-t3585016 )
Or any other error, then its little tricky to solve this.
Follow the below steps.
1. Keep your mobile connected using USB, obviously.
2. using one hand keep power button and volume down button pressed at same time and using other hand click blank-flash.bat file.
3. It might be possible that blank-flash.bat scritps get finished earlier, in that case, keep clicking .bat file continuously, you don't need to close previous cmd window. For me it took 5-6 run to get script detect/communicate with device. Here idea is that your mobile should get detected when you press power button+volume button while blank-flash.bat file is still executing.
4. keep trying step 3 unless you dont see below logs.
Click to expand...
Click to collapse
Having a look in the Pixel forums (also with a A/B partition system), users that have experienced similar issues a couple of years ago had to have their device replaced. I'm hoping we can get your device working without having to pay for a repair... https://forum.xda-developers.com/pixel-xl/help/pixelxl-bricked-t3517310
echo92 said:
Hmm, so the blankflash does make contact with your device, establishes a connection and sends over the programmer to verify your device, but the programmer reports an incorrect response...
What happens if you try the blankflash again, do you get a different response? Seems you're getting closer. The power and volume key trick has been suggested: (credit to https://forum.xda-developers.com/moto-g4-plus/help/solved-unbrick-hard-bricked-dead-t3585016 )
Having a look in the Pixel forums (also with a A/B partition system), users that have experienced similar issues a couple of years ago had to have their device replaced. I'm hoping we can get your device working without having to pay for a repair... https://forum.xda-developers.com/pixel-xl/help/pixelxl-bricked-t3517310
Click to expand...
Click to collapse
Doesn't work, i'll wait a update of blank-flash file.
luiz_neto said:
Doesn't work, i'll wait a update of blank-flash file.
Click to expand...
Click to collapse
You might be waiting a long time - those blankflashes are usually a leak from Motorola internal development. As such, we don't have access to new files and we're very lucky to get the ones we have. As far as I understand, we can't make them ourselves, as the blankflashes are signed by Motorola, and attempts to change the blankflash may break the signature (though this is old, I would not be surprised if the same still holds: https://forum.xda-developers.com/showpost.php?p=62191317&postcount=2112 )
Unless there's an updated SDM630 blankflash for the G6 Plus (or the X4?), you may have to consider a replacement or service repair.
ahmed.al said:
Try it again and again with a different pc or usb cable. It took Erfan 20 tries with 4 different PC’s.
Verzonden vanaf mijn iPhone met Tapatalk
Click to expand...
Click to collapse
Did you have the same problem as me? Had your moto G6 bricked too?
---------- Post added at 02:46 PM ---------- Previous post was at 02:36 PM ----------
echo92 said:
You might be waiting a long time - those blankflashes are usually a leak from Motorola internal development. As such, we don't have access to new files and we're very lucky to get the ones we have. As far as I understand, we can't make them ourselves, as the blankflashes are signed by Motorola, and attempts to change the blankflash may break the signature (though this is old, I would not be surprised if the same still holds: https://forum.xda-developers.com/showpost.php?p=62191317&postcount=2112 )
Unless there's an updated SDM630 blankflash for the G6 Plus (or the X4?), you may have to consider a replacement or service repair.
Click to expand...
Click to collapse
Since the Moto X4 has the same Chipset as Moto G6, can I use the same Blanck flash of the X4 on the G6? Since the Chipset of the two is the SDM630.
@luiz_neto there's nothing wrong with the blankflash. As mentioned earlier you need to try it a ****load of times (this is common). Using the moto X4's blankflash will change nothing.
luiz_neto said:
Did you have the same problem as me? Had your moto G6 bricked too?
---------- Post added at 02:46 PM ---------- Previous post was at 02:36 PM ----------
Since the Moto X4 has the same Chipset as Moto G6, can I use the same Blanck flash of the X4 on the G6? Since the Chipset of the two is the SDM630.
Click to expand...
Click to collapse
In theory, you could use the X4 blankflash - but the bootloaders would ideally have to be the same/similar to reduce the chance of any issues later on. That is if there even is an X4 blankflash...
If ahmed.al's and my suggestions to try the blankflash a few more times doesn't work, then it looks like you may have to talk to Motorola/your retailer and see if they'd be willing to repair/replace it. However, with an unlocked bootloader, I'm not sure if they will charge you. I don't know of a way to change back to the previous bootloader slot without fastboot.
luiz_neto said:
Did you have the same problem as me? Had your moto G6 bricked too?
---------- Post added at 02:46 PM ---------- Previous post was at 02:36 PM ----------
Since the Moto X4 has the same Chipset as Moto G6, can I use the same Blanck flash of the X4 on the G6? Since the Chipset of the two is the SDM630.
Click to expand...
Click to collapse
have you tried with linux? maybe you can get a more stable usb connection
jekyll86 said:
have you tried with linux? maybe you can get a more stable usb connection
Click to expand...
Click to collapse
Not yet, just run the blank-flash.sh file on Linux???
luiz_neto said:
Not yet, just run the blank-flash.sh file on Linux???
Click to expand...
Click to collapse
yes, give it a try
jekyll86 said:
yes, give it a try
Click to expand...
Click to collapse
nothing happens dude. :crying:
luiz_neto said:
nothing happens dude. :crying:
Click to expand...
Click to collapse
What error do you see?