I have an ANE-LX2 build number C636E4R1P5 (I live in Europe), latest security patch installed is from July 2020 and the OTA updater can't find any new update. It seems like on European firmware C432 the updates are released regularly. Is it possible to switch to this region and keep receiving updates?
I've read may threads but don't know where to start. Thanks in advance
ImFrengo said:
I have an ANE-LX2 build number C636E4R1P5 (I live in Europe), latest security patch installed is from July 2020 and the OTA updater can't find any new update. It seems like on European firmware C432 the updates are released regularly. Is it possible to switch to this region and keep receiving updates?
I've read may threads but don't know where to start. Thanks in advance
Click to expand...
Click to collapse
You have to unlock the bootloader first , for free or using paid service ,
info .
If you choose paid service , you have to download to EMUI 8 via HiSuite. If the rollback option is not available with your HiSuite ("switch to the older version" or "Earlier version"), you must downgrade to the lower EMUI 9.1 build number doing the dload method flashing Service ROM.
I can't give you a link because of forum rules, but you can google it, search for 'ANE-LX2 9.1.0.209(C636E4R1P5T8) FULL STOCK' (password: ministryofsolutions.com ).
Note: This process will erase your phone!
Then try again downgrade with HiSuite.
After successfully downgrading to Oreo you need downgrade to 8.0.140 , download here .
Running 8.0.140 you should be able to use HCU-Clent etc., get code and unlock your bootloader.
Only then will the difficult part of debranding come .
The question is whether it is worth doing...
-Alf- said:
You have to unlock the bootloader first , for free or using paid service ,
info .
If you choose paid service , you have to download to EMUI 8 via HiSuite. If the rollback option is not available with your HiSuite ("switch to the older version" or "Earlier version"), you must downgrade to the lower EMUI 9.1 build number doing the dload method flashing Service ROM.
I can't give you a link because of forum rules, but you can google it, search for 'ANE-LX2 9.1.0.209(C636E4R1P5T8) FULL STOCK' (password: ministryofsolutions.com ).
Note: This process will erase your phone!
Then try again downgrade with HiSuite.
After successfully downgrading to Oreo you need downgrade to 8.0.140 , download here .
Running 8.0.140 you should be able to use HCU-Clent etc., get code and unlock your bootloader.
Only then will the difficult part of debranding come .
The question is whether it is worth doing...
Click to expand...
Click to collapse
Thank you, HiSuite allows me to downgrade to 8.0.0.192.
After downgrading to 8.0.0.140 as well and unlocking the bootloader, is the debranding part particularly difficult?
ImFrengo said:
Thank you, HiSuite allows me to downgrade to 8.0.0.192.
After downgrading to 8.0.0.140 as well and unlocking the bootloader, is the debranding part particularly difficult?
Click to expand...
Click to collapse
Read the instructions carefully and completely, check unfamiliar terminology by google or xda.
Here you go
Ok, just one doubt: the files in the procedure are for ANE-LX1 while mine is ANE-LX2, does it make any difference?
ImFrengo said:
does it make any difference?
Click to expand...
Click to collapse
Of course.
Are all those 4 files (oeminfo, TWRP, stock recovery, service ROM) model-dependent? If yes, do you know where I can find the files for ANE-LX2?
Thank you
ImFrengo said:
Are all those 4 files (oeminfo, TWRP, stock recovery, service ROM) model-dependent?
Click to expand...
Click to collapse
Oeminfo and Service ROM only.
ImFrengo said:
If yes, do you know where I can find the files for ANE-LX2?
Click to expand...
Click to collapse
I thought you wanted to do a rebrand to ANE-LX1 C432 ...
P.S.: You might be better off staying on the C636
-Alf- said:
I thought you wanted to do a rebrand to ANE-LX1 C432 ...
Click to expand...
Click to collapse
Sorry about the confusion, I thought there was a specific C432 for ANE-LX2... I'm still new to this.
Does this mean my ANE-LX2 would "become" an ANE-LX1 C432?
ImFrengo said:
Does this mean my ANE-LX2 would "become" an ANE-LX1 C432?
Click to expand...
Click to collapse
Exactly.
-Alf- said:
Exactly.
Click to expand...
Click to collapse
Ok here's what I've done so far:
downgraded to 8.0.0.192 from HiSuite
downgraded to 8.0.0.140 following this
unlocked bootloader using HCU client (attached photo of phone in fastboot mode).
So now all I need to do is follow these steps?
Just double-checking before I do any damage to the phone
ImFrengo said:
So now all I need to do is follow these steps?
Click to expand...
Click to collapse
Yes, or these steps: Chapter 2.
"Chapter 2." is maybe simpler...
(I recommend reading the whole post!).
First flash oeminfo in TWRP, then continue with Chapter 2. !
These steps seem quite clear:
- In fastboot install TWRP, run
fastboot flash recovery_ramdisk TWRP-oreo-smart.img
fastboot reboot .
- Boot into TWRP and flash it over eRecovery :
-- select storage - SD Card, select "Install image", find TWRP file and mark eRecovery, swipe. Go back, find RECOVERY_RAMDISK-ANE-OREO file , mark Recovery, swipe. Reboot system, when yellow warning appears press and hold Volume Up.
- In TWRP select Install image and flash oeminfo.img file (mark oeminfo, swipe). Go back to main TWRP's menu, select Reboot > Power Off.
- Flash Service ROM using three buttons combo.
THE PROCESS WILL LOCK THE BOOTLOADER AGAIN!
Only thing is, what do you mean by "Flash Service ROM using three buttons combo."?
----
Edit: I guess it's standard dload method?
Also, should I add the ".img" at the end of the oeminfo file?
ImFrengo said:
Only thing is, what do you mean by "Flash Service ROM using three buttons combo."?
----
Edit: I guess it's standard dload method?
Click to expand...
Click to collapse
Power + both volume; standard.
ImFrengo said:
Also, should I add the ".img" at the end of the oeminfo file?
Click to expand...
Click to collapse
Yes.
Followed all the steps, bootloop after trying to install service rom
Is there a way to just take it back to the original state?
-Alf- said:
Power + both volume; standard.
Yes.
Click to expand...
Click to collapse
Either restoring the original or fixing the C432, either one is fine.. I'm still able to access TWRP, I don't know if that's useful
ImFrengo said:
Followed all the steps, bootloop after trying to install service rom
Click to expand...
Click to collapse
Your bootloader is locke or unlocked ? In fastboot run command
fastboot oem get-build-number
fastboot getvar vendorcountry
and post results.
ImFrengo said:
Is there a way to just take it back to the original state?
Click to expand...
Click to collapse
Only using the same procedure - oeminfo for C636 and service ROM 8.0.0.xxx C636 etc.
-Alf- said:
Your bootloader is locke or unlocked ? In fastboot run command
fastboot oem get-build-number
fastboot getvar vendorcountry
and post results.
Click to expand...
Click to collapse
C:\platform-tools>fastboot oem get-build-number
(bootloader) :System 8.0.0.046(0CXB)
OKAY [ 0.006s]
Finished. Total time: 0.008s
C:\platform-tools>fastboot getvar vendorcountry
vendorcountry: hw/eu
Finished. Total time: 0.005s
Fastboot screen on the phone shows "phone locked"
Related
hi,i have a mate 10 pro with stock android 8, unlocked bootloader by flashing unlock key via fastboot. frp unlocked.
stock recovery. not rooted.
bla-l29 c432 131
when i start my mate 10 it says "device cannot be trusted".. before it boots as normal.
Can i lock\relock bootloader and make it go away??
tried:
fastboot oem relock "unlock code"
fastboot oem lock "unlock code"
and it came password failed :\
usb debugging: on
oem unlock: on
flash oem info of sorts?
try: fastboot reboot oem relock?
if i switch oem unlock to off again in developers option and then use commands??
Thanks for help!
FiXed, used adb interface drivers, i tried several until i found 1 that worked
Hi, with mate 8 and mate 9 when you flash officiel firmware he relock bootloader, try this or you can buy credit (4) for relock with DC unlocker.
So... tell me please why you unlock your bootloader if you don't flash twrp or root ??
Dont buy any credit. I Will provide you The solution today.
---------- Post added at 05:49 AM ---------- Previous post was at 05:03 AM ----------
614Emil said:
hi,i have a mate 10 pro with stock android 8, unlocked bootloader by flashing unlock key via fastboot. frp unlocked.
stock recovery. not rooted.
bla-l29 c432 131
Click to expand...
Click to collapse
Use this tutorial (flash update)
https://forum.xda-developers.com/mate-10/how-to/guide-mate-10-flash-oreo-update-package-t3716814
In short:
- download your full firmware (3 files)
- in repack part chose to lock bootloader
- ota part
End of story.
badmania98 said:
Dont buy any credit. I Will provide you The solution today.
---------- Post added at 05:49 AM ---------- Previous post was at 05:03 AM ----------
Use this tutorial (flash update)
https://forum.xda-developers.com/mate-10/how-to/guide-mate-10-flash-oreo-update-package-t3716814
In short:
- download your full firmware (3 files)
- in repack part chose to lock bootloader
- ota part
End of story.
Click to expand...
Click to collapse
Thanks, I will try this later and let you know how it goes!
If you only want to relocked your bootloader just use the HWOTA8_Mate 10 tool from the link bellow.
download the tool > go to lock directory > use relock.bat
you'll need to provide your bootloader unlock code to re-locked it.
https://forum.xda-developers.com/mate-10/how-to/guide-mate-10-flash-oreo-update-package-t3716814
Lykeul said:
Hi, with mate 8 and mate 9 when you flash officiel firmware he relock bootloader, try this or you can buy credit (4) for relock with DC unlocker.
So... tell me please why you unlock your bootloader if you don't flash twrp or root ??
Click to expand...
Click to collapse
hi aok ill look into that plan was getting viper or some good sound mod, but it seems its not finished developed for Oreo 8.0
Buran79 said:
If you only want to relocked your bootloader just use the HWOTA8_Mate 10 tool from the link bellow.
download the tool > go to lock directory > use relock.bat
you'll need to provide your bootloader unlock code to re-locked it.
https://forum.xda-developers.com/mate-10/how-to/guide-mate-10-flash-oreo-update-package-t3716814
Click to expand...
Click to collapse
it did not work :\
614Emil said:
it did not work :\
Click to expand...
Click to collapse
did you try info.bat? does it restart to fastboot mode so you can see the bootloader status?
what method or tool did you use to unlock de bootloader?
Buran79 said:
did you try info.bat? does it restart to fastboot mode so you can see the bootloader status?
what method or tool did you use to unlock de bootloader?
Click to expand...
Click to collapse
i have to set it in fastboot manually then it shows:
Lock state info:
FB LockState: LOCKED
USER LockState: UNLOCKED
Current build number:
BLA-L29 8.0.0.131(C432)
Product model:
BLA-L29
to unlock i used cmd and -fastboot oem unlock "code"-
Buran79 said:
If you only want to relocked your bootloader just use the HWOTA8_Mate 10 tool from the link bellow.
download the tool > go to lock directory > use relock.bat
you'll need to provide your bootloader unlock code to re-locked it.
https://forum.xda-developers.com/mate-10/how-to/guide-mate-10-flash-oreo-update-package-t3716814
Click to expand...
Click to collapse
hi^^ did not work either, after i put in the "code" in the cmd window,i can see Failed before the cmd window quickly dissapears
614Emil said:
hi^^ did not work either, after i put in the "code" in the cmd window,i can see Failed before the cmd window quickly dissapears
Click to expand...
Click to collapse
I think you are not having proper mate 10 pro windows drivers. Try following the HWOTA_mate10 guide about preparation, there is a registry fix and you should uninstall HiCare for proper device recognition
Buran79 said:
I think you are not having proper mate 10 pro windows drivers. Try following the HWOTA_mate10 guide about preparation, there is a registry fix and you should uninstall HiCare for proper device recognition
Click to expand...
Click to collapse
Hi, i just started thinking about that, just to be sure since i did not get mtp folder in my computer anymore(win 10)
i switched to my laptop win 8.1,
installed the adb driver manually as adb composite interface in normal mtp\debug phone on.
in fastboot the driver said adb sooner single interface
and then when i am supposed to switch inn to the stock recovery modded with adb support,
i get 3 devies with yellow ! in device manager:
1. huawei- device properties and details then choose bus reported device description: huawei
2. unknown device: - device properties and details then choose bus reported device description: adb interface
3. unknown device: - device properties and details then choose bus reported device description: hdb interface
what should i set these to manually?
i am trying to use "flash update" in HWOTA_mate10 guide and i am on step D run ota.
supposed to switch from fastboot to recovery then the script waits for adb connection
Did you disable oem unlocking in developer options?
EngrVan said:
Did you disable oem unlocking in developer options?
Click to expand...
Click to collapse
no, but i just fixed it!
it showed adb interface, i tried different android drivers\adb drivers, found the right combo inn the end
Bootloader Unlock not possible - but eRecovery working
@ante0
I have Mate 10 BLA-L09c432 and installed latest Firmware 8.0.0.157 since two days. I updated with official OTA.
Before I had 8.0.0.137 → on that Firmware I read the Bootloader Unlock Code with DC Unlocker → and I got a new Unlock Code.
The originial Unlock Code did not work anymore (Phone was from a friend of mine and bricked and I restored it by FunkyHuawei - and bought it).
I unlocked the Bootloader with the new Code (read by DC) and it worked.
Two days ago I decided to update with OTA. I reflashed the original recovery_ramdisk and ramdisk.img. Update was succesful.
→ I tried to relock the Bootloader (because I am thinking about to sell the phone) → and it does not work! Not with the originial Code, not with the new Code (read on b137)
I did nothing wrong, because this year I unlocked about 40 devices (because I am helping to repair bricked phones from Users of Android Hilfe de) and I know very well how to do. (OEM Unlock enabled, ADB Debugging and USB Debugging enabled, HiSuite HDB disabled, HiSuite on PC closed, ADB and Fastboot working....)
Code:
fastboot oem relock UNLOCKCODE
does not work
But I have no idea yet how to relock the Loader I will try once more - but perhaps you or someone has an idea?
So perhaps I should just be happy to have a unlocked Phone and keep it instead of selling it....
Everything else is working.
And I found out some interesting point → seems Huawei started to bring the Feature of eRecovery even to European Versions of his Phones (from a certain firmware version)
I booted to Huawei eRecovery and "Download latest version and Recovery" is running without FunkyHuawei
Tecalote said:
@ante0
I have Mate 10 BLA-L09c432 and installed latest Firmware 8.0.0.157 since two days. I updated with official OTA.
Before I had 8.0.0.137 → on that Firmware I read the Bootloader Unlock Code with DC Unlocker → and I got a new Unlock Code.
The originial Unlock Code did not work anymore (Phone was from a friend of mine and bricked and I restored it by FunkyHuawei - and bought it).
I unlocked the Bootloader with the new Code (read by DC) and it worked.
Two days ago I decided to update with OTA. I reflashed the original recovery_ramdisk and ramdisk.img. Update was succesful.
→ I tried to relock the Bootloader (because I am thinking about to sell the phone) → and it does not work! Not with the originial Code, not with the new Code (read on b137)
I did nothing wrong, because this year I unlocked about 40 devices (because I am helping to repair bricked phones from Users of Android Hilfe de) and I know very well how to do. (OEM Unlock enabled, ADB Debugging and USB Debugging enabled, HiSuite HDB disabled, HiSuite on PC closed, ADB and Fastboot working....)
does not work
But I have no idea yet how to relock the Loader I will try once more - but perhaps you or someone has an idea?
So perhaps I should just be happy to have a unlocked Phone and keep it instead of selling it....
Everything else is working.
And I found out some interesting point → seems Huawei started to bring the Feature of eRecovery even to European Versions of his Phones (from a certain firmware version)
I booted to Huawei eRecovery and "Download latest version and Recovery" is running without FunkyHuawei
Click to expand...
Click to collapse
Use the DLOAD method with the B150 firmware from androidhost.ru, that should lock (not relock) it.
Pretoriano80 said:
Use the DLOAD method with the B150 firmware from androidhost.ru, that should lock (not relock) it.
Click to expand...
Click to collapse
Thanks Mate :good:
So I have just to check the Xloader thing before
Tecalote said:
Thanks Mate :good:
So I have just to check the Xloader thing before
Click to expand...
Click to collapse
B150 from androidhost.ru is xloader 2, which build do you have now?
Pretoriano80 said:
B150 from androidhost.ru is xloader 2, which build do you have now?
Click to expand...
Click to collapse
I have b157 (latest Firmware for c432, installed with official OTA (Full) from b137 to b157)
Tecalote said:
I have b157 (latest Firmware for c432, installed with official OTA (Full) from b137 to b157)
Click to expand...
Click to collapse
Then you can use B150 to downgrade with DLOAD method. That should reset the phone and lock the bootloader, to fabric condition.
Can Anybody help me ?
I have a rooted and unlocked Mate 10 Pro.
But with the new Update , i can't downgrade Play Service.... I need this for a Game.
Now i need to downgrade to a lower version.
Thanks for help.
P.s.: I search in the Forum , but the most is search for downgrade from EMUI 8 to 7 or 9 to 8.
The lowest version you can downgrade to is B146 (Assuming you are on BLA-L29C432B156), using firmware from androidhost.ru.
OR flash images manually through TWRP, this way you could downgrade to first build if you wanted to xD
Just don't flash XLOADER.img as you are on new xloader. Flashing one from B145 or earlier will brick your phone.
ante0 said:
The lowest version you can downgrade to is B146 (Assuming you are on BLA-L29C432B156), using firmware from androidhost.ru.
OR flash images manually through TWRP, this way you could downgrade to first build if you wanted to xD
Just don't flash XLOADER.img as you are on new xloader. Flashing one from B145 or earlier will brick your phone.
Click to expand...
Click to collapse
For flash with TWRP you must need "BOOTLOADER UNLOCKED" and you know very wel that's service is Down from time.
So you guide NOT help for nothing.
vanito said:
For flash with TWRP you must need "BOOTLOADER UNLOCKED" and you know very wel that's service is Down from time.
So you guide NOT help for nothing.
Click to expand...
Click to collapse
Did I state otherwise? OP has an unlocked bootloader.
ante0 said:
Did I state otherwise? OP has an unlocked bootloader.
Click to expand...
Click to collapse
Ok sorry, haven't seen OP have unlocked bootloader.
Ok now i want do a question to you.
Sinche i've all professional tool for Extract and Flash also each single partition in Upgrade mode w/o unlocked bootloader, have one BLA-L09 C432 in B158.
If i flash the B143 C432 w/o Xloader partition, phone will not boot or boot having same B156 version?
My customer mistaked this device flashing Ram Disk, (Loader) + OEMINFO by TESTPOINT and have lost IMEI. So, i was searching a way for Downgrade and do Imei Repair, but there writed in all side that's impossible Downgrade from B156 or earlier...you have solution?
vanito said:
Ok sorry, haven't seen OP have unlocked bootloader.
Ok now i want do a question to you.
Sinche i've all professional tool for Extract and Flash also each single partition in Upgrade mode w/o unlocked bootloader, have one BLA-L09 C432 in B158.
If i flash the B143 C432 w/o Xloader partition, phone will not boot or boot having same B156 version?
My customer mistaked this device flashing Ram Disk, (Loader) + OEMINFO by TESTPOINT and have lost IMEI. So, i was searching a way for Downgrade and do Imei Repair, but there writed in all side that's impossible Downgrade from B156 or earlier...you have solution?
Click to expand...
Click to collapse
Easiest way, in my opinion, would be to just flash board firmware. Since he already has testpoint available?
Then you can repair imeis and that while on board using HCU. You can not get back original oeminfo though unless he has a backup of it.
But imeis that phone uses will be repaired, and you can still unlock using HCU's get unlock code button. Original code, if he got it through Huawei, will not be usable though.
Here's a guide for using HCU and steps to take, any deviation from these steps will result in no imei or no network.
1)Flash oeminfo (own backup) from fastboot
2)Backup modemnvm_system, modemnvm_factory and modemnvm_backup using adb pull from a command prompt (/dev/block/bootdevice/by-name/modemnvm_system and so on)
3)Flash backed up modemnvm_system, modemnvm_factory and modemnvm_backup from fastboot
3)Modify and brand with HCU (check everything but those that erase/flash empty board) (remember to fill vendor and cust)
4)Unlock sim with HCU
5)Read Bootloader code if you ever used HCU to get code before
6)Download and flash service firmware from androidhost.ru using a OTG cable and a memory stick
For step 1 you should be able to just backup and flash the existing oeminfo in phone as it's already using someone elses (DC's oeminfo flash will just download an oeminfo from their server and flash it, so you get someone elses oeminfo).
I have ALP-L29 (c185) Running emui 9.1.0.32 and unlocked bootloder. Is there any way to relock bootloader. I have tried DC unlocker (says chipset is not competible), Multi-tool, and fastboot command but none of them worked. Also tried to restore an factory reset with Erecovery but still unlocked. I am planning to sell my phone but probably buyer won't want root or unlocked bootloder
draqkin said:
I have ALP-L29 (c185) Running emui 9.1.0.32 and unlocked bootloder. Is there any way to relock bootloader. I have tried DC unlocker (says chipset is not competible), Multi-tool, and fastboot command but none of them worked. Also tried to restore an factory reset with Erecovery but still unlocked. I am planning to sell my phone but probably buyer won't want root or unlocked bootloder
Click to expand...
Click to collapse
Update using a dload firmware. It will lock it.
However, there seem to be no free one for ALP C185 9.1 :/
ante0 said:
Update using a dload firmware. It will lock it.
However, there seem to be no free one for ALP C185 9.1 :/
Click to expand...
Click to collapse
Sorry but what is "a dload firmware"?? I am familiar with dload folder methode ( force Update) but is there a special kind of firmware for this methode?
draqkin said:
Sorry but what is "a dload firmware"?? I am familiar with dload folder methode ( force Update) but is there a special kind of firmware for this methode?
Click to expand...
Click to collapse
Service firmware. And yes, it's special. Firmware from Huaweis own server (hicloud) is Online only, and can't be used to lock bl.
Service firmware is Offline, so you can flash it using an OTG cable and a memory stick.
Or, since you're rooted, you can place it directly in /data/update/dload/ and skip the OTG cable part.
You'd then reboot and hold VOL UP + VOL DOWN (OTG plugged in to phone if not /data/update/dload is used) and phone will start in force update mode and start update.
ante0 said:
Service firmware. And yes, it's special. Firmware from Huaweis own server (hicloud) is Online only, and can't be used to lock bl.
Service firmware is Offline, so you can flash it using an OTG cable and a memory stick.
Or, since you're rooted, you can place it directly in /data/update/dload/ and skip the OTG cable part.
You'd then reboot and hold VOL UP + VOL DOWN (OTG plugged in to phone if not /data/update/dload is used) and phone will start in force update mode and start update.
Click to expand...
Click to collapse
Hmm then i assume Team MT firmwares are not dload firmwares. So is there any way to get this special firmwares for my phone?
draqkin said:
Hmm then i assume Team MT firmwares are not dload firmwares. So is there any way to get this special firmwares for my phone?
Click to expand...
Click to collapse
Found one on AH.ru that should work: https://androidhost.ru/1MH5
I downloaded and confirmed it's a service firmware anyway
ante0 said:
Found one on AH.ru that should work: https://androidhost.ru/1MH5
I downloaded and confirmed it's a service firmware anyway
Click to expand...
Click to collapse
Thanks much ? i will give it a try. One last question if i restore and relock bootloader with this firmware, can i unlock bootloder again with my old unlock code? ( in case i need to root again) ?
draqkin said:
Thanks much ? i will give it a try. One last question if i restore and relock bootloader with this firmware, can i unlock bootloder again with my old unlock code? ( in case i need to root again) ?
Click to expand...
Click to collapse
Yes, as long as you don't modify oeminfo too much. But update will not change unlock code.
Oh yeah, I noticed the dload came without instructions. If you use otg and memory card you just copy the 'dload' folder (after extracting from zip) and paste on a memory stick. Then plug in otg cable in phone and reboot while holding vol up + down. If you use /data/update/ you'd have to transfer files using adb push to /sdcard/ and from a command prompt:
adb push update_sd.zip /sdcard/
adb push update_sd_ALP-L29_hw_meafnaf.zip /sdcard/
adb shell
su
mkdir -p /data/update/dload/ALP-L29_hw_meafnaf/
mv /sdcard/update_sd.zip /data/update/dload/
mv /sdcard/update_sd_ALP-L29_hw_meafnaf.zip /data/update/dload/ALP-L29_hw_meafnaf/
meafnaf zip might be named differently, I turned off computer so can't check.
After this, still in adb shell:
echo --factory_sd_update > /cache/recovery/command
reboot
Phone will reboot to update mode and flash firmware.
After this you should be locked
Thanks again
ante0 said:
Found one on AH.ru that should work: https://androidhost.ru/1MH5
I downloaded and confirmed it's a service firmware anyway
Click to expand...
Click to collapse
Look like zip file has a password. Do you have it by any chance?
draqkin said:
Look like zip file has a password. Do you have it by any chance?
Click to expand...
Click to collapse
It's 'ministryofsolutions.com'
Try disabling find my device
I've had this problem before as well with adb, first set the phone up and disable find my device, then try to relock the bootloader again with adb.
Hi
My model is ALP-L29
software version : 9.1.0.321(C636E5R1P13)
I unlocked my bootloader long time ago with the code from huawei.
Now i would like to relock it using dload format method.
Where do i download the fw to perfrom this method? and what version should i download?
carnby24 said:
Hi
My model is ALP-L29
software version : 9.1.0.321(C636E5R1P13)
I unlocked my bootloader long time ago with the code from huawei.
Now i would like to relock it using dload format method.
Where do i download the fw to perfrom this method? and what version should i download?
Click to expand...
Click to collapse
Try restore it from eRecovery ,, or there's rom in androidhost site but you need @ante0 for confirming if this service firmware or not you can download it then extract it and see if there's dload service or not .
https://androidhost.ru/1MoI
hamadazh said:
Try restore it from eRecovery ,, or there's rom in androidhost site but you need @ante0 for confirming if this service firmware or not you can download it then extract it and see if there's dload service or not .
https://androidhost.ru/1MoI
Click to expand...
Click to collapse
If it contains a dload folder it should work.
So if im having the current fw 9.1.0.321(C636E5R1P13), what should the service firmware be?
---------- Post added at 01:36 PM ---------- Previous post was at 01:32 PM ----------
ante0 said:
If it contains a dload folder it should work.
Click to expand...
Click to collapse
hamadazh said:
Try restore it from eRecovery ,, or there's rom in androidhost site but you need @ante0 for confirming if this service firmware or not you can download it then extract it and see if there's dload service or not .
https://androidhost.ru/1MoI
Click to expand...
Click to collapse
Are you sure Erecovery will lock back my bootloader?
carnby24 said:
So if im having the current fw 9.1.0.321(C636E5R1P13), what should the service firmware be?
---------- Post added at 01:36 PM ---------- Previous post was at 01:32 PM ----------
Are you sure Erecovery will lock back my bootloader?
Click to expand...
Click to collapse
Erecovery will not lock bootloader.
Generally you'd want a service firmware for the current build you're on, but that's now always possible. Any 9.1 C636 should work though.
hamadazh said:
Try restore it from eRecovery ,, or there's rom in androidhost site but you need @ante0 for confirming if this service firmware or not you can download it then extract it and see if there's dload service or not .
https://androidhost.ru/1MoI
Click to expand...
Click to collapse
Its asking for a password when i unzip it? Anyone know what is the password?
Oh okay Never mind, found out the password of some googling.
ministryofsolutions.com
Ive tried all the normal ways fastboot oem lock ect ect
And it it safe for me? Are there any prequisite's?
Thanks
medseven said:
Ive tried all the normal ways fastboot oem lock ect ect
And it it safe for me? Are there any prequisite's?
Thanks
Click to expand...
Click to collapse
The "fastboot oem lock" command does not exist, it is certainly not a normal way
The best method to lock bootloader is searching for the Service rom on https://androidhost.ru/ and doing the dload method. Process will erase all the data from your device !
(Before you do anything, read carefully Software Upgrade Guidline in "ReleaseDoc" . With Service ROM you will get full stock with locked bootloader (warranty will not void any more).)
Hi thanks a lot for your reply, Unfortunately I cannot find such rom on the site for the life of me.
medseven said:
Hi thanks a lot for your reply, Unfortunately I cannot find such rom on the site for the life of me.
Click to expand...
Click to collapse
Hi, which build number do you run? (e.g. ANE-LX1 9.1.0.306 (C432))
bozka1 said:
The "fastboot oem lock" command does not exist, it is certainly not a normal way
The best method to lock bootloader is searching for the Service rom on https://androidhost.ru/ and doing the dload method. Process will erase all the data from your device !
(Before you do anything, read carefully Software Upgrade Guidline in "ReleaseDoc" . With Service ROM you will get full stock with locked bootloader (warranty will not void any more).)
Click to expand...
Click to collapse
bozka1 said:
Hi, which build number do you run? (e.g. ANE-LX1 9.1.0.306 (C432))
Click to expand...
Click to collapse
it is ane-lgprs-ovs 9.1.0.13 it does not show me the c variant.
I see your replying to my other thread aswell, no point having 2 so I will carry on here.
I have downloaded a rom called Huawei P20 Lite ANE-LX1 ANE-L01 hw eu HLRCF Anne-L01 8.0.0.167(C432) Firmware 8.0.0 r1 EMUI8.0 05015ACF [androidhost.ru] so I am going to try this with HuRUUpdater 0.4
medseven said:
it is ane-lgprs-ovs 9.1.0.13 it does not show me the c variant.
Click to expand...
Click to collapse
It can be found in System - About phone . It's very important.
all it gives me in build number is ANE-LGRPS-OVS 9.1.0.132
there really is no brackets or c variant
medseven said:
all it gives me in build number is ANE-LGRPS-OVS 9.1.0.132
there really is no brackets or c variant
Click to expand...
Click to collapse
Strange, maybe you tried to install some firmware manually before, hm?
Connect your phone in fastboot mode to PC , open 'Minimal ADB and fastboot' and use command
fastboot oem get-build-number
Unfortunately not even HuRUUpdater 0.4 is working with this particular rom it reports unknown error so I am at a complete loss really
bozka1 said:
The "fastboot oem lock" command does not exist, it is certainly not a normal way
The best method to lock bootloader is searching for the Service rom on https://androidhost.ru/ and doing the dload method. Process will erase all the data from your device !
(Before you do anything, read carefully Software Upgrade Guidline in "ReleaseDoc" . With Service ROM you will get full stock with locked bootloader (warranty will not void any more).)
Click to expand...
Click to collapse
bozka1 said:
Hi, which build number do you run? (e.g. ANE-LX1 9.1.0.306 (C432))
Click to expand...
Click to collapse
bozka1 said:
Strange, maybe you tried to install some firmware manually before, hm?
Connect your phone in fastboot mode to PC , open 'Minimal ADB and fastboot' and use command
fastboot oem get-build-number
Click to expand...
Click to collapse
even with fastboot its the same, no brackets or c variant!
on another not are the service roms called 'board software' ?
medseven said:
even with fastboot its the same, no brackets or c variant!
Click to expand...
Click to collapse
it should now be clear that you have installed the wrong version of firmware, IMO...
I can't you help anymore, sorry.
ok thanks for your time
Credit to @user_ScoTTT for providing the files and instructions.
So @user_ScoTTT has unlocked his bootloader for his Chinese version via official methods and was kind enough to share with us the files and instructions.
The instructions he provided are as below as are the files if anyone wishes to play around.
Disclaimer: I have not tested this.
1. Download and Unpack the latest ozip full update package of the Chinese version of oppo find x2 pro by dragging the Ozip onto the ozip2zip.exe. (You can use the boot.img file i have provided if you prefer)
2. extract the boot.img from it (be sure to back it up), (after unlocking the bootloader) you only need to transfer the boot.img file to your phone.
3. Install magisk manager on the phone, click "install", click "fix a file", select the boot.img you extracted from the ozip image.
4. Turn off the phone, press and hold the volume-& power button to restart to bootloader, connect to the data Connect to the PC, use
fastboot flash boot magisk_patched.img
5. flash vbmeta.img with "fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img" to disable Verified Boot otherwise you will face the problem of not being able to boot.
6. "fastboot reboot" (reboot)
After that, your phone will reboot and enter the system, open magisk manager, it will show that magisk has been successfully installed. (Before this, you will be prompted that you need to repair it, click OK, and it will automatically restart once)
Enjoy Root!
Files can be found here:
https://drive.google.com/drive/folders/1cqKwrOSX_0fAdgZSRqG1_Lk3AQ5-COZs?usp=sharing
Hope this helps kick off some more development on these great devices.
Thanks all.
Any word on the global / EU versions with root?
Sent from my CPH2025 using Tapatalk
kevinireland11 said:
Any word on the global / EU versions with root?
Sent from my CPH2025 using Tapatalk
Click to expand...
Click to collapse
Before that, you need to unlock your phone
user_ScoTTT said:
Before that, you need to unlock your phone
Click to expand...
Click to collapse
How do we unlock bootloader with non Chinese versions?
Sent from my CPH2025 using Tapatalk
kevinireland11 said:
How do we unlock bootloader with non Chinese versions?
Sent from my CPH2025 using Tapatalk
Click to expand...
Click to collapse
We have to wait for the latest official news.
user_ScoTTT said:
We have to wait for the latest official news.
Click to expand...
Click to collapse
Keep us up to date please lol
Sent from my CPH2025 using Tapatalk
Nice .
Waiting for global version
user_ScoTTT said:
We have to wait for the latest official news.
Click to expand...
Click to collapse
Can I flash global rom after I unlockbootloader ? And what if I can flash, do I need to keep bootloader unlocked ? Because maybe OTA will be affected if I doesn't lock the bootloader again, but is it the same method as pixel phones ? Fastboot oem lock ' will work like this ? I forget also to ask do I need to be registered in depth testing program so that I can unlockbootloader ?
when I adb reboot bootloader the phone just reboots into the OS, have i done something wrong?
Mohamadshuwaiee said:
Can I flash global rom after I unlockbootloader ? And what if I can flash, do I need to keep bootloader unlocked ? Because maybe OTA will be affected if I doesn't lock the bootloader again, but is it the same method as pixel phones ? Fastboot oem lock ' will work like this ? I forget also to ask do I need to be registered in depth testing program so that I can unlockbootloader ?
Click to expand...
Click to collapse
Yes, the method is the same as the pixel phone. At present, the depth testing is not open to the international version of ROM.
---------- Post added at 04:12 PM ---------- Previous post was at 04:10 PM ----------
gb155 said:
when I adb reboot bootloader the phone just reboots into the OS, have i done something wrong?
Click to expand...
Click to collapse
Just press and hold the vol - and power key to start the machine.
Sage said:
Credit to @user_ScoTTT for providing the files and instructions.
So @user_ScoTTT has unlocked his bootloader for his Chinese version via official methods and was kind enough to share with us the files and instructions.
The instructions he provided are as below as are the files if anyone wishes to play around.
Disclaimer: I have not tested this.
1. Download and Unpack the latest ozip full update package of the Chinese version of oppo find x2 pro by dragging the Ozip onto the ozip2zip.exe. (You can use the boot.img file i have provided if you prefer)
2. extract the boot.img from it (be sure to back it up), (after unlocking the bootloader) you only need to transfer the boot.img file to your phone.
3. Install magisk manager on the phone, click "install", click "fix a file", select the boot.img you extracted from the ozip image.
4. Turn off the phone, press and hold the volume-& power button to restart to bootloader, connect to the data Connect to the PC, use
fastboot flash boot magisk_patched.img
5. flash vbmeta.img with "fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img" to disable Verified Boot otherwise you will face the problem of not being able to boot.
6. "fastboot reboot" (reboot)
After that, your phone will reboot and enter the system, open magisk manager, it will show that magisk has been successfully installed. (Before this, you will be prompted that you need to repair it, click OK, and it will automatically restart once)
Enjoy Root!
Files can be found here:
https://drive.google.com/drive/folders/1cqKwrOSX_0fAdgZSRqG1_Lk3AQ5-COZs?usp=sharing
Hope this helps kick off some more development on these great devices.
Thanks all.
Click to expand...
Click to collapse
I have the Chinese version I need to register in depth testing and wait for approval to unlock bootloader first ?
Mohamadshuwaiee said:
I have the Chinese version I need to register in depth testing and wait for approval to unlock bootloader first ?
Click to expand...
Click to collapse
yup thats right. you need official unlock of the bootloader first.
Sage said:
yup thats right. you need official unlock of the bootloader first.
Click to expand...
Click to collapse
So does this apply to the models bought in the UK? Don't tell me this is another Huawei situation all over again? They're notorious for not allowing bootloader unlocking!
Sent from my [device_name] using XDA-Developers Legacy app
"So does this apply to the models bought in the UK? Don't tell me this is another Huawei situation all over again? They're notorious for not allowing bootloader unlocking!"
Yep! EE Model here, the App says "Customised Carrier Device" so it wont let me Unlock, so yes. UK for the most part / carrier phones are not allowed..
Stan464 said:
"So does this apply to the models bought in the UK? Don't tell me this is another Huawei situation all over again? They're notorious for not allowing bootloader unlocking!"
Yep! EE Model here, the App says "Customised Carrier Device" so it wont let me Unlock, so yes. UK for the most part / carrier phones are not allowed..
Click to expand...
Click to collapse
What app bud?
Sent from my [device_name] using XDA-Developers Legacy app
speedyjay said:
What app bud?
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Oppo has Released an App (works very well in China) and allows you to setup "in Depth Testing". Check the "Root Guide" Threat out in relation to this phone...
Hope this helps.
Hello,
My find X2 pro and unlocked but I can't rotate it, it doesn't start, there is a red triangular at startup indicating a problem with the recovery.
I think the vbmeta.img file doesn't want to install.
Anyone have an idea? thank you.
They're never be root, to get rid of these carriers oppos ****e
kevinireland11 said:
They're never be root, to get rid of these carriers oppos ****e
Click to expand...
Click to collapse
i have a pure global version. no carrier ****e on mine
Sage said:
i have a pure global version. no carrier ****e on mine
Click to expand...
Click to collapse
Wish we could flash unbranded...