I have bricked my X3 SZ and worked 1 week to get it unbricked (bricked after update of Android 11) myself, even the service centre not able to restore it and told me that may be Motherboard Problem. Finally by flashing Android 11 Stock images (created using OFP to CMD file converter), I restore the phone. I tried with unlocked Bootloader mode, don't know about locked bootloader state.
Simply download the stock images from the link and boot into bootloader mode, connect to PC, open Minimal ADB Fastboot and flash with fastboot commands. Required USB, Realme, Android Drivers to be installed in the PC. All your data will be lost and do it at your own risk.
Download all the images (userdata, recovery, boot, vbmeta & dtbo) and copy to the Minimal ADB Fastboot folder, run the CMD prompt and run the following commands:
fastboot devices (to check whether phone connected successfully or not)
fastboot erase userdata
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash vbmeta vbmeta.img
fastboot flash userdata userdata.img
fastboot flash dtbo dtbo.img
fastboot reboot
Done.. your X3 SZ must reboot and starts, if not you need to work around or contact SC.. Good Luck
Link Deleted
Thx
EDIT: Very informative and useful!
Cant get magisk_boot.img to work. Going to try orangefox recovery to install Magisk (root).
Tried numerous times to install it (here) took 3-4 hours to get Python to work in windows 7 (cus missing libraries, and newer version dont work). Its bricked the phone 3 times now.
I tried to install TWRP but failed, after I tried Orangefox, successfully installed but not able to boot, rebooting into recovery only, then I flashed only boot image using fastboot and able to boot but lost Custom Recovery. After all I stopped trying anything on X3 SZ
please provide new link
Related
Hi, my brothers xt 1022 its bricked on initial looping.
The original bootloader works, i try hard reset, wipe data, but doesnt work.
I got unlock bootloader, because debug is disable, i dont be twrp or cwm or stock recovery works.
In the last time i try most tutorials for recovery with fasboot, .bat files, but doesnt worked.
i try send stock recovery in the update via sideload.
In this mode adb devices show the xt but returns error closed on adb usb.
I try kill-server but error closed persist
The sideload of zip rom goes to 100% but xt returns error to update.
Please help me
updating
in fastboot in try to twrp = incomplete boot image for booting.
how do i give the backup files via sideload, to try move the files and try recovery like a backup via side load, its possible?
update 2
I edit the adb_usb.ini and include id of device in recovery update adb and in fastboot. with the 2 adress include the name in managment device change to faastboot condor S. But still dont work the install twrp etc
Help
Hi, with fastboot these comands i have sucsses
fastboot flash partition gpt.bin
version downgraded for primary gpt
fastboot flash motoboot motoboot.img
downgraded for tz
fastboot flash boot boot.img
downgraded for boot
the outhers comand for flash doesnt work
Please help me with unbricked theses paper holder moto e
In android device info
show my device
condor_niibr_ds-user 4.4.4 KXC21.5-44 2 release-keys
kxc21.5-44
Anybody show me one rom .zip , to sideload from stock recovery. Or this rom to reinstal via sideload
Thanks
Hello to all !
In order to install Lineage OS on my Xiaomi Redmi Note 5, I was trying to flash TWRP as recovery. I was able to run successfully command 'fastboot flash antirbpass dummy.img' to skirt anti rollback, then i execute successfully 'fastboot flash recovery recovery.img' command to flash TWRP, but no way to boot on TWRP.
I tried also to run command 'fastboot boot recovery.img' but while booting it stays stucked on MI logo.
While searching for a solution I inconveniently run command 'fastboot flash boot recovery.img', so now I'm in a bootloop on fastboot mode if I press volume down and power button, or MI logo if I start in normal mode.
I still have access to fastboot commands, do you know how I can do to fix it (and maybe a way to install TWRP correctly) ?
And I can not stop my phone, does it exist a command which allows to do this in fastboot or I have to wait for my phone to be without battery ?
Thanks in advance for your help !
Ivanov93 said:
Hello to all !
In order to install Lineage OS on my Xiaomi Redmi Note 5, I was trying to flash TWRP as recovery. I was able to run successfully command 'fastboot flash antirbpass dummy.img' to skirt anti rollback, then i execute successfully 'fastboot flash recovery recovery.img' command to flash TWRP, but no way to boot on TWRP.
I tried also to run command 'fastboot boot recovery.img' but while booting it stays stucked on MI logo.
While searching for a solution I inconveniently run command 'fastboot flash boot recovery.img', so now I'm in a bootloop on fastboot mode if I press volume down and power button, or MI logo if I start in normal mode.
I still have access to fastboot commands, do you know how I can do to fix it (and maybe a way to install TWRP correctly) ?
And I can not stop my phone, does it exist a command which allows to do this in fastboot or I have to wait for my phone to be without battery ?
Thanks in advance for your help !
Click to expand...
Click to collapse
I guess you have Redmi note 5 - codename: Whyred (Snapdragon 636 and with dual rear camera) so Redmi 5 plus doesn´t have ARB.
If the next recommendation doesn´t work you will find better guidance in the thread for your specific device https://forum.xda-developers.com/redmi-note-5-pro so is slightly different.
Flash again your stock boot image , reboot and check that USB debugging is enabled and start again the process:
Put TWRP in your sdcard and a copy with this name in your adb folder into pc, reboot to fastboot and first just boot to TWRP, don´t flash it in fastboot, use code
Code:
fastboot boot TWRP.img
then in TWRP flash TWRP file and flash dummy.img ARB. In the case that your counter is up to 4 here you will find the file to enable again fastboot mode https://forum.xda-developers.com/redmi-note-5-pro/how-to/index-everything-anti-roll-t3816219
Ivanov93 said:
I still have access to fastboot commands, do you know how I can do to fix it (and maybe a way to install TWRP correctly) ?
Click to expand...
Click to collapse
I will assume that you have the correct TWRP build for your device (do you have vince, or whyred?).
If you have the correct TWRP, then did you flash magisk or lazyflasher after installing TWRP?
MAAAN
Do like this: once you flashed type
Fastboot boot recoveryname.img
I would like to share my experienced how to unbricked my phone that stock on fastboot mode.why my phone is brick? The reason why my phone brick just because i restore the wrong system with the other vendor from china to miuimix and after restore it, it stock on fastboot mode unable to recover backup or to load in recovery mode. It didn't also turn off. l try to use miflash tool but it didn't work because of authorization not match to my phone, i tried other fastboot rom but it didnt work.. Try to boot twrp using fastboot boot but it didn't show any. I came up with the idea to flash. Img using cmd into the system that i restore, begin with the boot.img nothing will happen. Until i flash the vbmeta.img, then it begin to show boot img and eventually access twrp. I wiped everything and flash again a brandnew rom miui12 and it works well now.. Hope it will help to others to have an idea to unbrick there phone. ☺☺☺
flamedrops said:
I would like to share my experienced how to unbricked my phone that stock on fastboot mode.why my phone is brick? The reason why my phone brick just because i restore the wrong system with the other vendor from china to miuimix and after restore it, it stock on fastboot mode unable to recover backup or to load in recovery mode. It didn't also turn off. l try to use miflash tool but it didn't work because of authorization not match to my phone, i tried other fastboot rom but it didnt work.. Try to boot twrp using fastboot boot but it didn't show any. I came up with the idea to flash. Img using cmd into the system that i restore, begin with the boot.img nothing will happen. Until i flash the vbmeta.img, then it begin to show boot img and eventually access twrp. I wiped everything and flash again a brandnew rom miui12 and it works well now.. Hope it will help to others to have an idea to unbrick there phone.
Click to expand...
Click to collapse
Could you explain? My phone is stuck at fastboot and my pc doesn't detect the phone.
if u could access your phone via fastboot / adb then it wasn't a hardbrick , just a softbrick
TahmidZee said:
Could you explain? My phone is stuck at fastboot and my pc doesn't detect the phone.
Click to expand...
Click to collapse
You should check first the driver of your computer. Make sure you have the driver of your phone to your computer. After that you can check your device via adb by using commnd on cmd "adb devices".
instructions to flash:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot erase recovery
fastboot flash recovery twrp-3.3.1-0-davinci.img
link: https://dl.twrp.me/davinci/twrp-3.3.1-0-davinci.img
w595shubham said:
instructions to flash:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot erase recovery
fastboot flash recovery twrp-3.3.1-0-davinci.img
link: https://dl.twrp.me/davinci/twrp-3.3.1-0-davinci.img
Click to expand...
Click to collapse
VERY VERY THANX A LOT MAN...THX THX THX:highfive:
flamedrops said:
I would like to share my experienced how to unbricked my phone that stock on fastboot mode.why my phone is brick? The reason why my phone brick just because i restore the wrong system with the other vendor from china to miuimix and after restore it, it stock on fastboot mode unable to recover backup or to load in recovery mode. It didn't also turn off. l try to use miflash tool but it didn't work because of authorization not match to my phone, i tried other fastboot rom but it didnt work.. Try to boot twrp using fastboot boot but it didn't show any. I came up with the idea to flash. Img using cmd into the system that i restore, begin with the boot.img nothing will happen. Until i flash the vbmeta.img, then it begin to show boot img and eventually access twrp. I wiped everything and flash again a brandnew rom miui12 and it works well now.. Hope it will help to others to have an idea to unbrick there phone.
Click to expand...
Click to collapse
Can u please explain it. I am stuck with the same problem. I got success in flashing fastboot rom via miflash tool but it's still stuck in fastboot.
Thanks God Bless You.
---------- Post added at 05:01 PM ---------- Previous post was at 04:36 PM ----------
Deaddo6 said:
VERY VERY THANX A LOT MAN...THX THX THX:highfive:
Click to expand...
Click to collapse
This Helped You guys are angel
w595shubham said:
instructions to flash:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot erase recovery
fastboot flash recovery twrp-3.3.1-0-davinci.img
link: https://dl.twrp.me/davinci/twrp-3.3.1-0-davinci.img
Click to expand...
Click to collapse
I have the same problem. I tried also this one, but nothing.
Everything goes ok in CMD, but when I type:
fastboot boot twrp.img
I get:
FAILED (remote: Failed to load/authenticate boot image: Load Error)
I still can't go in Recovery, neither turn off the phone. How solve this?!
dix93 said:
I have the same problem. I tried also this one, but nothing.
Everything goes ok in CMD, but when I type:
flash boot twrp.img
I get:
FAILED (remote: Failed to load/authenticate boot image: Load Error)
I still can't go in Recovery, neither turn off the phone. How solve this?!
Click to expand...
Click to collapse
flash boot twrp.img?
What do you wanna do?
If you want to boot into TWRP it should be
Code:
fastboot boot recovery "name-of- recovery.img"
If you want to flash TWRP it should be
Code:
fastboot flash recovery "name-of-recovery.img"
Your command
fastboot flash boot twrp.img should flash the recovery image over the boot image?
If you want to boot into twrp you should use the command above.
As far as I know not every device/firmware is able to boot into TWRP. It seems other users were able to do so with a mi 9t so my advice would be:
- Try another usb port / cable.
- Check twice if you renamed the twrp image correctly
- Try another twrp version (older one or unofficial)
w595shubham said:
instructions to flash:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot erase recovery
fastboot flash recovery twrp-3.3.1-0-davinci.img
link: https://dl.twrp.me/davinci/twrp-3.3.1-0-davinci.img
Click to expand...
Click to collapse
Wolfcity said:
flash boot twrp.img?
What do you wanna do?
If you want to boot into TWRP it should be
Code:
fastboot boot recovery "name-of- recovery.img"
If you want to flash TWRP it should be
Code:
fastboot flash recovery "name-of-recovery.img"
Your command
fastboot flash boot twrp.img should flash the recovery image over the boot image?
If you want to boot into twrp you should use the command above.
As far as I know not every device/firmware is able to boot into TWRP. It seems other users were able to do so with a mi 9t so my advice would be:
- Try another usb port / cable.
- Check twice if you renamed the twrp image correctly
- Try another twrp version (older one or unofficial)
Click to expand...
Click to collapse
Thank you. Actually I was confused in the transcript here, I meant fast boot instead of flash.
But I figured out to use XiaomiFlash Tool to install a ROM via fastboot, and then reinstall a recovery.
The popup camera is not working good with the XIAOMI official rom (It tries to close the cam even if it is already closed). Now I'm trying to install Havoc OS to try to solve those problem, but it demands me the miui v11.0.4 or new (error in twrp), even if I have the miui v12.... trying to figure out why
for the guys whome are stuck on fastboot, you may try "XiaoMiTool V2". this bought my Mi9T from fastboot to life.
make sure all the drivers are installed as well. what's better is install usb drivers, reboot computer, enable usb debugging, connect the phone to computer, select transfer data, wait till the computer completely setup your phone, turn off phone and connect to computer, wait till computer detects and setup, put the phone on fastboot mode and connect, check whether computer shows android device... once everything are confirmed then proceed with flasing.. :good::good:
w595shubham said:
instructions to flash:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot erase recovery
fastboot flash recovery twrp-3.3.1-0-davinci.img
link: https://dl.twrp.me/davinci/twrp-3.3.1-0-davinci.img
Click to expand...
Click to collapse
This command - fastboot flash vbmeta worked.
(using a version from Redispade for Grus - mi9se)
Unbricked my bootloop (recovery) after upgrading from miui 12 (android 10) to 12.5 android 11.
thanks!
Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via recovery (either stock) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
This version is only for not branded devices
Download the zip;
Unpack the zip in a folder;
Reboot the OnePlus Nord in fastboot-bootloader mode (Power and volume + and volume-);
Connect the OnePlus Nord to PC;
Run flash-all.bat flasher you need;
Wait until the process end;
The phone will automatically reboot.
DOWNLOAD
All roms on Sourceforge: https://sourceforge.net/projects/fastbootroms/files/OnePlus Nord/
BRANDED PHONE
For now branded device are not supported
MANUAL FLASH: Windows - OSX - Linux
If you want to manual flash these roms these are the commands (You need the latest sdk platform tools, you can find it here
Is reccomended to format data or the rom cannot boot:
Code:
fastboot -w
Others Commands to flash a fastboot rom
Code:
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash modem modem.img
fastboot flash recovery recovery.img
fastboot --disable-verity flash vbmeta vbmeta.img
fastboot --disable-verity flash vbmeta_system vbmeta_system.img
fastboot reboot fastboot
fastboot flash abl abl.img
fastboot flash aop aop.img
fastboot flash bluetooth bluetooth.img
fastboot flash devcfg devcfg.img
fastboot flash dsp dsp.img
fastboot flash featenabler featenabler.img
fastboot flash hyp hyp.img
fastboot flash imagefv imagefv.img
fastboot flash keymaster keymaster.img
fastboot flash logo logo.img
fastboot flash oem_stanvbk oem_stanvbk.img
fastboot flash odm odm.img
fastboot flash qupfw qupfw.img
fastboot flash storsec storsec.img
fastboot flash tz tz.img
fastboot flash uefisecapp uefisecapp.img
fastboot flash xbl xbl.img
fastboot flash xbl_config xbl_config.img
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash product product.img
fastboot reboot
REMEMBER
"Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.
If the device automatically reboot in Stock Recovery mode don't reboot it and wait the flash end.
These ROMs can't be used to update or downgrade your phone but just to restore your phone.
If the rom seems doesn't start go in recovery stock and follow this guideline: English -> Wipe data and cache -> Erase everything.
If you want to rebrand your phone from HydrogenOS to OxygenOS you can follow this guide: Rebrand Guide
If you want you can use also my tool to flash Factory Images, unlock bootloader, flash twrp or to understand if the device is recognized: https://toolaio.tk/
If you got some problems like write error or no partition, check this: https://forum.xda-developers.com/showpost.php?p=76658555&postcount=34
DONATE LINK
If you want to support this and others my projects please consider making a donation, thanks.
I was already waiting for it.:laugh:
mauronofrio said:
Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via recovery (either stock) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
This version is only for not branded devices
Download the zip;
Unpack the zip in a folder;
Reboot the OnePlus Nord in fastboot-bootloader mode (Power and volume + and volume-);
Connect the OnePlus Nord to PC;
Run flash-all.bat flasher you need;
Wait until the process end;
The phone will automatically reboot.
DOWNLOAD
All roms on Sourceforge: https://sourceforge.net/projects/fastbootroms/files/OnePlus Nord/
BRANDED PHONE
For now branded device are not supported
MANUAL FLASH: Windows - OSX - Linux
If you want to manual flash these roms these are the commands (You need the latest sdk platform tools, you can find it here
Is reccomended to format data or the rom cannot boot:
Others Commands to flash a fastboot rom
REMEMBER
"Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.
If the device automatically reboot in Stock Recovery mode don't reboot it and wait the flash end.
These ROMs can't be used to update or downgrade your phone but just to restore your phone.
If the rom seems doesn't start go in recovery stock and follow this guideline: English -> Wipe data and cache -> Erase everything.
If you want to rebrand your phone from HydrogenOS to OxygenOS you can follow this guide: Rebrand Guide
If you want you can use also my tool to flash Factory Images, unlock bootloader, flash twrp or to understand if the device is recognized: https://toolaio.tk/
If you got some problems like write error or no partition, check this: https://forum.xda-developers.com/showpost.php?p=76658555&postcount=34
DONATE LINK
If you want to support this and others my projects please consider making a donation, thanks.
Click to expand...
Click to collapse
I an waiting for TWRP...
cieffe54 said:
I an waiting for TWRP...
Click to expand...
Click to collapse
Check development thread
cieffe54 said:
I an waiting for TWRP...
Click to expand...
Click to collapse
And i am waiting for end of corona pandemic.
Kollachi said:
And i am waiting for end of corona pandemic.
Click to expand...
Click to collapse
But i shared it too...
Hello and thank you for the fastboot roms !
How To Use This!
mauronofrio said:
Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via recovery (either stock) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
This version is only for not branded devices
Download the zip;
Unpack the zip in a folder;
Reboot the OnePlus Nord in fastboot-bootloader mode (Power and volume + and volume-);
Connect the OnePlus Nord to PC;
Run flash-all.bat flasher you need;
Wait until the process end;
The phone will automatically reboot.
DOWNLOAD
All roms on Sourceforge: https://sourceforge.net/projects/fastbootroms/files/OnePlus Nord/
BRANDED PHONE
For now branded device are not supported
MANUAL FLASH: Windows - OSX - Linux
If you want to manual flash these roms these are the commands (You need the latest sdk platform tools, you can find it here
Is reccomended to format data or the rom cannot boot:
Code:
fastboot -w
Others Commands to flash a fastboot rom
Code:
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash modem modem.img
fastboot flash recovery recovery.img
fastboot --disable-verity flash vbmeta vbmeta.img
fastboot --disable-verity flash vbmeta_system vbmeta_system.img
fastboot reboot fastboot
fastboot flash abl abl.img
fastboot flash aop aop.img
fastboot flash bluetooth bluetooth.img
fastboot flash devcfg devcfg.img
fastboot flash dsp dsp.img
fastboot flash featenabler featenabler.img
fastboot flash hyp hyp.img
fastboot flash imagefv imagefv.img
fastboot flash keymaster keymaster.img
fastboot flash logo logo.img
fastboot flash oem_stanvbk oem_stanvbk.img
fastboot flash odm odm.img
fastboot flash qupfw qupfw.img
fastboot flash storsec storsec.img
fastboot flash tz tz.img
fastboot flash uefisecapp uefisecapp.img
fastboot flash xbl xbl.img
fastboot flash xbl_config xbl_config.img
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash product product.img
fastboot reboot
REMEMBER
"Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.
If the device automatically reboot in Stock Recovery mode don't reboot it and wait the flash end.
These ROMs can't be used to update or downgrade your phone but just to restore your phone.
If the rom seems doesn't start go in recovery stock and follow this guideline: English -> Wipe data and cache -> Erase everything.
If you want to rebrand your phone from HydrogenOS to OxygenOS you can follow this guide: Rebrand Guide
If you want you can use also my tool to flash Factory Images, unlock bootloader, flash twrp or to understand if the device is recognized: https://toolaio.tk/
If you got some problems like write error or no partition, check this: https://forum.xda-developers.com/showpost.php?p=76658555&postcount=34
DONATE LINK
If you want to support this and others my projects please consider making a donation, thanks.
Click to expand...
Click to collapse
Oneplus Nord oxygen os install guide
Get OEM Drivers from https://oneplususbdrivers.com/download-oneplus-usb-driver/
Download Oxygen OS 10.5.4 for your compatible devices from https://sourceforge.net/projects/fastbootroms/files/OnePlus Nord/
(Boot loader Must be Unlocked)
If still able to boot into any version of Android:
1. Install Oneplus OEM Drivers
2. Open Settings
3. Click About
4. Find the build number and click the Build number Severn times until you get a message saying developer Options have been enabled.
5. Enable ADB USB Debugger
6. Unzip the Oxygen OS File
7. Open CMD and run it as Administrator
8. Plug Your Oneplus Nord into your PC
9. Type into CMD cd and drag the Oxygen OS Folder over CMD, then Click Enter
10. This will make the link before the next line quite long.
11. Then Type into CMD “adb reboot bootloader” (This will make your Phone Reboot into Fastboot)
If You are Unable to boot into any Operating System:
1. Install Oneplus OEM Drivers
2. Unzip the Oxygen OS File
3. Open CMD and run it as Administrator
4. Type into CMD cd and drag the Oxygen OS Folder over CMD, then Click Enter
5. This will make the link before the next line quite long.
6. Plug Your Oneplus Nord into your Computer
7. When your phone is powered off, Hold Volume Up, Volume Down and the Power Button until you get the Oneplus Logo with fastboot Beneath.
Once in the Bootloader:
1. Type fastboot devices to confirm that your device has been recognised by your PC.
2. After this Open the Oxygen OS Folder and double click Flash-All.adb and It will open in command Prompt.
3. This will take a long time but wait until the phone has booted up into your phones setup (Do Not touch the Phone or Computer).
4. Setup Your Phone but don’t setup anything as we need to wipe it again, so skip through everything.
5. Once in the primary OS connect to WIFI
6. Go to Settings and Update your phone to the latest version, you will get a message prompting you that the Boot loader is unlocked etc, Ignore this and continue.
7. Click the reboot button when prompted, your Software will update to the latest version of Oxygen OS.
Once Updated:
1. Open Settings
2. Click About
3. Find the build number and click the Build number Severn times until you get a message saying developer Options have been enabled.
4. Enable ADB USB Debugger
5. Unzip the Oxygen OS File
6. Open CMD and run it as Administrator
7. Plug Your Oneplus Nord into your PC
8. Type into CMD cd and drag the Oxygen OS Folder over CMD, then Click Enter
9. This will make the link before the next line quite long.
10. Then Type into CMD “adb reboot bootloader” (This will make your Phone Reboot into Fastboot).
11. Once in Fastboot type “fastboot OEM lock” then your phone will prompt you if you want to Lock the bootloader.
12. Use the volume button to scroll down and press enter to confirm that you want to lock your bootloader.
13. When locked your phone will reboot and it will wipe your operating system and reboot your device into setup.
14. You can now setup your phone as you wish.
there's not oneplus widget? i can't find it
Jackmitchell62 said:
Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via recovery (either stock) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
This version is only for not branded devices
Download the zip;
Unpack the zip in a folder;
Reboot the OnePlus Nord in fastboot-bootloader mode (Power and volume + and volume-);
Connect the OnePlus Nord to PC;
Run flash-all.bat flasher you need;
Wait until the process end;
The phone will automatically reboot.
DOWNLOAD
All roms on Sourceforge: https://sourceforge.net/projects/fastbootroms/files/OnePlus Nord/
BRANDED PHONE
For now branded device are not supported
MANUAL FLASH: Windows - OSX - Linux
If you want to manual flash these roms these are the commands (You need the latest sdk platform tools, you can find it here
Is reccomended to format data or the rom cannot boot:
Others Commands to flash a fastboot rom
Oneplus Nord oxygen os install guide
Get OEM Drivers from https://oneplususbdrivers.com/download-oneplus-usb-driver/
Download Oxygen OS 10.5.4 for your compatible devices from https://sourceforge.net/projects/fastbootroms/files/OnePlus Nord/
(Boot loader Must be Unlocked)
If still able to boot into any version of Android:
1. Install Oneplus OEM Drivers
2. Open Settings
3. Click About
4. Find the build number and click the Build number Severn times until you get a message saying developer Options have been enabled.
5. Enable ADB USB Debugger
6. Unzip the Oxygen OS File
7. Open CMD and run it as Administrator
8. Plug Your Oneplus Nord into your PC
9. Type into CMD cd and drag the Oxygen OS Folder over CMD, then Click Enter
10. This will make the link before the next line quite long.
11. Then Type into CMD “adb reboot bootloader” (This will make your Phone Reboot into Fastboot)
If You are Unable to boot into any Operating System:
1. Install Oneplus OEM Drivers
2. Unzip the Oxygen OS File
3. Open CMD and run it as Administrator
4. Type into CMD cd and drag the Oxygen OS Folder over CMD, then Click Enter
5. This will make the link before the next line quite long.
6. Plug Your Oneplus Nord into your Computer
7. When your phone is powered off, Hold Volume Up, Volume Down and the Power Button until you get the Oneplus Logo with fastboot Beneath.
Once in the Bootloader:
1. Type fastboot devices to confirm that your device has been recognised by your PC.
2. After this Open the Oxygen OS Folder and double click Flash-All.adb and It will open in command Prompt.
3. This will take a long time but wait until the phone has booted up into your phones setup (Do Not touch the Phone or Computer).
4. Setup Your Phone but don’t setup anything as we need to wipe it again, so skip through everything.
5. Once in the primary OS connect to WIFI
6. Go to Settings and Update your phone to the latest version, you will get a message prompting you that the Boot loader is unlocked etc, Ignore this and continue.
7. Click the reboot button when prompted, your Software will update to the latest version of Oxygen OS.
Once Updated:
1. Open Settings
2. Click About
3. Find the build number and click the Build number Severn times until you get a message saying developer Options have been enabled.
4. Enable ADB USB Debugger
5. Unzip the Oxygen OS File
6. Open CMD and run it as Administrator
7. Plug Your Oneplus Nord into your PC
8. Type into CMD cd and drag the Oxygen OS Folder over CMD, then Click Enter
9. This will make the link before the next line quite long.
10. Then Type into CMD “adb reboot bootloader” (This will make your Phone Reboot into Fastboot).
11. Once in Fastboot type “fastboot OEM lock” then your phone will prompt you if you want to Lock the bootloader.
12. Use the volume button to scroll down and press enter to confirm that you want to lock your bootloader.
13. When locked your phone will reboot and it will wipe your operating system and reboot your device into setup.
14. You can now setup your phone as you wish.
Click to expand...
Click to collapse
Or simply use MSM tool ?
https://forum.xda-developers.com/oneplus-nord/how-to/opnord-unbrick-tool-to-restore-device-t4148415
Reboot in recovery
Hello everyone, I need help.
I got the message "File system raw not supported." after executing the flash_all.bat and
Code:
boot_b, dtbo, modem_b, recovery, vbmeta, vbmeta_system,
was sent with status
Code:
OKAY
(the first part of the script, as far as I can see), then is supposed to reboot on fastboot and stays at
Code:
<waiting for any device>
, here is when my phone restarts in recovery instead (it says "fastbootd" in the upper part and a menu to select chinesse or english, but it's recovery mode, right?), then the first time I wited for 15 minutes but nothing happened, so I selected reboot into fastboot in recovery mode, then in CMD I got the message "fastboot: error Failed to boot into userspace fastboot; one or more components might be unbootable", and the seccond part of the script was executed, but with
Code:
FAILED (remote: 'Flashing is not allowed for Critical Partitions')
status in the writing process, and after,
Code:
"Invalid sparse file format at header magic"
with
Code:
FAILED (remote: 'Partition not found')
when trying to write system, vendor and product. My phone restarted and looked normar but wifi didn't work, and the UI started to fail after the configuration.
So I tried again, but without rebooting from recovery; how much time do I have to wait there?, maybe this will not work.
Please if someone knows how to solve my problem I'll be glad for the help.
MSM TOOL
https://forum.xda-developers.com/oneplus-nord/how-to/opnord-unbrick-tool-to-restore-device-t4148415
I succeeded from linux, everything seems to work fine now.
I just have one question, there's one file missing
fastboot flash storsec storsec.img
Is supposed to be like that or is that an important file missed?
That file doesn't exists in the 10.5.5-INDIA-NordOxygen_14_OTA_007_all_2008180229 zip file
I bricked my device and nothing (what i try) worked.
Hello Guys,
Thanks for the Roms and also for twrp @ mauronofrio!
If i try to flash in fastboot the roms, i get different fails:
the first part of commands are okay until "fastboot reboot fastboot"
than, until "fastboot flash xbl_config xbl_config.img" i get:
"writing 'xbl_config'...
FAILED (remote: Flashing is not allowed for Critical Partitions)"
and for the lasts, i get:
FAILED (remote: Partition not found)
I read that some windows-user have the same Problem and therrefore the Problem is not the bricked phone, is it right?
Someone knows the same Problem in linux? I prefer a solution without windows (msm-tool).
I tried to root and flash with twrp, now i know, it's impossible to flash zips until now. I try some other things with twrp, it's possible that i delete some partitions?
Someone have a good solution?
thanks for reading and support
Hi,
Few questions:
Has Global rom OP dialer? Can be enabled auto call recording with root or adb? I know abut Skvalex.
Can I flash 10.5.5 Global at 10.5.9 EEA (flash_all.bat)?
Getting stuck on odm and vendor flashing. It will not flash odm and vendor no file exists message (using flash all bat). Any help will be greatly appreciated.
Update: got it back to stock using edl mode.
You can flash this way. When you enter from the fastboot to the fastbootD mode Windows thinks it's a new device and doesn't recognize it. If you open device manager from control panel it will showns as unknow device. So all you have to do is install the driver again. Then you can flash anything you want in fastbootD.
-
What does "unbranded" mean here? Will I get OTA updates? Will this relock the bootloader?
delete
Hi there ,
I am currently having an issue and would appreciate some help .
What I want:
A new OS on my Android device. I actually dont care which OS, so i just chose LineageOS (In order to get rid of a Stock-ROM-Error)
[Rooting would also solve the Problem, but I cant get to either solution, see below]
What I have:
Lenovo Yoga Tab 3 Pro 10 (YT3-x90f)
Android 6.0.1
OEM unlocked
Bootloader unlocked
adb and fastboot connection to Win10 PC works
What I did:
Before I can install another OS, I need another Recoverysystem.
To achieve that I tried:
1.
start cmd with admin
"cd <PathFile to fastboot.exe and .img-file>
adb reboot bootloader
fastboot flashing unlock
fastboot flash recovery twrp.img"
reboot to recovery
2.
start cmd with admin
"cd <PathFile to fastboot.exe and .img-file>
adb reboot bootloader
fastboot flashing unlock
fastboot boot twrp.img"
In the pictures I used Powershell instead of CMD (But that was due to an fastboot Error, that I could solve with existing posts in the forum )
And here comes the current Main-Problem:
In CMD I can flash or boot any .img file to the android device without error messages.
But on my tablet I ALWAYS get the following Error:
"bzimage kernel corrupt
couldnt load boot image: invalid parameter"
I tried the following .img files:
TWRP
- 3.6.2
- 3.6.1
- 3.1.1
- 3.0.2
- 2.8.7
- 2.5.0
OrangeFox
To Outrule an Error or an Incompatibility in the img file from TWRP I tried OrangeFox and got the same message.
Thanks a lot in advance for your time
Sven_Wolf said:
Hi there ,
I am currently having an issue and would appreciate some help .
What I want:
A new OS on my Android device. I actually dont care which OS, so i just chose LineageOS (In order to get rid of a Stock-ROM-Error)
[Rooting would also solve the Problem, but I cant get to either solution, see below]
What I have:
Lenovo Yoga Tab 3 Pro 10 (YT3-x90f)
Android 6.0.1
OEM unlocked
Bootloader unlocked
adb and fastboot connection to Win10 PC works
What I did:
Before I can install another OS, I need another Recoverysystem.
To achieve that I tried:
1.
start cmd with admin
"cd <PathFile to fastboot.exe and .img-file>
adb reboot bootloader
fastboot flashing unlock
fastboot flash recovery twrp.img"
reboot to recovery
2.
start cmd with admin
"cd <PathFile to fastboot.exe and .img-file>
adb reboot bootloader
fastboot flashing unlock
fastboot boot twrp.img"
In the pictures I used Powershell instead of CMD (But that was due to an fastboot Error, that I could solve with existing posts in the forum )
And here comes the current Main-Problem:
In CMD I can flash or boot any .img file to the android device without error messages.
But on my tablet I ALWAYS get the following Error:
"bzimage kernel corrupt
couldnt load boot image: invalid parameter"
I tried the following .img files:
TWRP
- 3.6.2
- 3.6.1
- 3.1.1
- 3.0.2
- 2.8.7
- 2.5.0
OrangeFox
To Outrule an Error or an Incompatibility in the img file from TWRP I tried OrangeFox and got the same message.
Thanks a lot in advance for your time
Click to expand...
Click to collapse
There is only one working TWRP recovery available for this tablet here (the data enabled one in post #2). If you have any questions about it, go to this thread.