Anyone else experiencing this? Less than 10 seconds after I fingerprint unlock, sometimes the screen will go black while I'm reading a message or whatever. Other times it seems to be triggered by a touch action, like pressing on an icon or clearing a notification.
I found no setting that explains it. Screen timeout is set to 1 minute. I don't have any third party lockscreen or display related apps. It's been happening for as long as I can remember with this phone, and I thought the January update might fix it but it persisted through. Faulty proximity sensor maybe? I'm starting to contemplate warranty servicing.
Glaux said:
Anyone else experiencing this? Less than 10 seconds after I fingerprint unlock, sometimes the screen will go black while I'm reading a message or whatever. Other times it seems to be triggered by a touch action, like pressing on an icon or clearing a notification.
I found no setting that explains it. Screen timeout is set to 1 minute. I don't have any third party lockscreen or display related apps. It's been happening for as long as I can remember with this phone, and I thought the January update might fix it but it persisted through. Faulty proximity sensor maybe? I'm starting to contemplate warranty servicing.
Click to expand...
Click to collapse
I think it's A12. On the P5 you could look at the device and it would stay on when doing something. The feature, although there is a setting on/off, does not work any longer. I never had it on the P6 shipped with A12 but on the P5 my wife has the same problems since updating. So perhaps a proximity update will fix it but if all else is working the replacement will almost guaranteed be worse.
Glaux said:
Anyone else experiencing this? Less than 10 seconds after I fingerprint unlock, sometimes the screen will go black while I'm reading a message or whatever. Other times it seems to be triggered by a touch action, like pressing on an icon or clearing a notification.
I found no setting that explains it. Screen timeout is set to 1 minute. I don't have any third party lockscreen or display related apps. It's been happening for as long as I can remember with this phone, and I thought the January update might fix it but it persisted through. Faulty proximity sensor maybe? I'm starting to contemplate warranty servicing.
Click to expand...
Click to collapse
Are you using a custom kernel or have had a custom kernel installed in the past?
If so, you will need to try a factory reset and complete full stock image.
bobby janow said:
I think it's A12. On the P5 you could look at the device and it would stay on when doing something. The feature, although there is a setting on/off, does not work any longer. I never had it on the P6 shipped with A12 but on the P5 my wife has the same problems since updating. So perhaps a proximity update will fix it but if all else is working the replacement will almost guaranteed be worse.
Click to expand...
Click to collapse
I saw that setting but I don't see how it's relevant. Even without that setting, the display should not turn off on its own before 1 minute of inactivity.
vandyman said:
Are you using a custom kernel or have had a custom kernel installed in the past?
If so, you will need to try a factory reset and complete full stock image.
Click to expand...
Click to collapse
No. I didn't do any modding beyond bootloader unlock and root with Magisk. I flashed the January factory image a few days ago and rerooted, but as I said the problem started long before that.
Glaux said:
I saw that setting but I don't see how it's relevant. Even without that setting, the display should not turn off on its own before 1 minute of inactivity.
No. I didn't do any modding beyond bootloader unlock and root with Magisk. I flashed the January factory image a few days ago and rerooted, but as I said the problem started long before that.
Click to expand...
Click to collapse
I didn't realize you were rooted, I usually don't read signatures. Have you unrooted and tested? Other than that I'm not rooted so perhaps someone can help you out. Maybe change the title of the thread so rooted folks will jump in with suggestions. Good luck.
Looks like the issue might have come from the launcher I use, Smart Launcher. Specifically a setting called "Smart Screen Off" that's not working as intended. I turned that off and so far I can't reproduce the issue.
Related
Hello all. Ive seen a bunch of the threads of people talking about issues with their device, but I've found a few weird bugs that I haven't seen anywhere else, so I wanted to see if anyone else has seen these/knows a solution.
Before I get started, I have a 32GB WiFi only N9. I installed that first firmware update that you get when you start the device, and nothing else. I have NOT rooted, installed a customer kernel, unlocked the bootloader, nothing. My current build number reads as LRX21L.
1) Heads Up Notifications. I don't get them. Period. This was a Lollipop feature I was really looking forward to, and no matter what app it is or what I'm doing, they don't give me a Heads Up popup. I don't think I did anything that would turn them off, it's just weirding me out that it's not happening. Is there a toggle somewhere that controls it?
2) Flashlight Toggle. I love that we finally have this, but the weirdest thing happened recently: it vanished. Like just totally up and vanished. I've only used it a few times in the week I've had the device, but I've never even touched the Cast Screen toggle and it's still there. Honestly, I used the flashlight toggle less than 24 hours before it vanished. How do I get it back?
I'm inclined to do a factory reset and see if it fixes these issues, but I wanted to check with you folks first. I also feel like I'm forgetting a third thing, if it comes to me I'll add it to this post.
Thanks in advance.
Sorry to hear about your problems. I'm also not receiving heads up notifications. I have notifications set to "always interrupt", but have never received a heads up notification.
I still have the flashlight quick toggle, though (located under "invert colors").
I'd flash the 21Q factory image. You'll have to unlock the bootloader and flash it manually. If you still have problems it could be a hardware issue.
Sent from my Nexus 9 using XDA Free mobile app
TenderloinShadow said:
Hello all. Ive seen a bunch of the threads of people talking about issues with their device, but I've found a few weird bugs that I haven't seen anywhere else, so I wanted to see if anyone else has seen these/knows a solution.
Before I get started, I have a 32GB WiFi only N9. I installed that first firmware update that you get when you start the device, and nothing else. I have NOT rooted, installed a customer kernel, unlocked the bootloader, nothing. My current build number reads as LRX21L.
1) Heads Up Notifications. I don't get them. Period. This was a Lollipop feature I was really looking forward to, and no matter what app it is or what I'm doing, they don't give me a Heads Up popup. I don't think I did anything that would turn them off, it's just weirding me out that it's not happening. Is there a toggle somewhere that controls it?
2) Flashlight Toggle. I love that we finally have this, but the weirdest thing happened recently: it vanished. Like just totally up and vanished. I've only used it a few times in the week I've had the device, but I've never even touched the Cast Screen toggle and it's still there. Honestly, I used the flashlight toggle less than 24 hours before it vanished. How do I get it back?
I'm inclined to do a factory reset and see if it fixes these issues, but I wanted to check with you folks first. I also feel like I'm forgetting a third thing, if it comes to me I'll add it to this post.
Thanks in advance.
Click to expand...
Click to collapse
I saw this and was wondering if it's related to your flashlight issue: http://www.androidpolice.com/2014/11/17/lollipop-bug-leaving-the-flashlight-on-until-it-times-out-breaks-the-camera-and-flashlight-until-you-reboot/
Coming from Samsung here, so this feature is very new for me.
Does the knock to wake feature work if you're set on pattern lock? Or does it only work when you have knock code set as your security?
Reason I ask is because I initially had the knock code set as security, then changed to pattern after I set Android Pay. BUT, knock to wake has been working for me the past two days (even with the pattern lock ON)...until 2 hours ago.
Now the only way I can knock wake the device (or even access the second screen) is either to set the security as Knock Code, or press the power button.
Is this behavior normal? I found it weird that the second screen is untouchable with the pattern lock ON.
Knock On will work everytime regardless of your lock screen setting (double tap on the center of the screen to wake device up into lock screen).
Knock Code, however, need to be set to unlock your device, the pattern is of your choice.
Android Pay doesn't accept a knock code as a security measure. I was using it, then was forced to switch to pin after setting up Pay.
Ryu Kenshin said:
Knock On will work everytime regardless of your lock screen setting (double tap on the center of the screen to wake device up into lock screen).
Knock Code, however, need to be set to unlock your device, the pattern is of your choice.
Click to expand...
Click to collapse
ok so correct me if I'm wrong: regardless of your security settings, KNOCK ON will work to wake the device up. Yes?
In that case, something has gone wrong with mine as I can only do knock on when Knock Code is set. Even worse, the second screen shortcuts are only accessible in that mode as well.
I think I just encountered a similar if not the same problem but I'm not sure if it's an app or if it coincides with something I accidentally tapped in the hidden menu last night.
I had been using pattern unlock since I got the phone on friday and double tap to wake the screen was working fine along side fingerprint unlock, now double tapping doesn't work and the second screen does not respond when locked.
EDIT: I just tried knock pattern and it allowed me to wake the screen but the moment I switched back to pattern it stopped responding to screen wake tapping.
mastarpete said:
I think I just encountered a similar if not the same problem but I'm not sure if it's an app or if it coincides with something I accidentally tapped in the hidden menu last night.
I had been using pattern unlock since I got the phone on friday and double tap to wake the screen was working fine along side fingerprint unlock, now double tapping doesn't work and the second screen does not respond when locked.
EDIT: I just tried knock pattern and it allowed me to wake the screen but the moment I switched back to pattern it stopped responding to screen wake tapping.
Click to expand...
Click to collapse
sorry to hear about that, seems like you have exactly what I had. Knock on just stopped working out of nowhere.
Good news is, I did a factory reset and it fixed the issue. Albeit, without access to Titanium Backup, it's quite a chore right now to redo all of my setups. Trying LG Backup now just in case.
Give factory reset a try and hopefully it'll solve your issue as well.
baymon said:
sorry to hear about that, seems like you have exactly what I had. Knock on just stopped working out of nowhere.
Good news is, I did a factory reset and it fixed the issue. Albeit, without access to Titanium Backup, it's quite a chore right now to redo all of my setups. Trying LG Backup now just in case.
Give factory reset a try and hopefully it'll solve your issue as well.
Click to expand...
Click to collapse
Yeah I was kind of afraid I'd have to reset already, barely a week in, lol!
Thanks for letting me know a reset worked, hopefully it doesn't happen again.
I think @knifedroid had the answer. AndroidPay doesn't allow you to use knock. I have the same issue as well...well i guess it's not an issue...it's a feature.
Sent from my LG-H901 using Tapatalk
KwestJones said:
I think @knifedroid had the answer. AndroidPay doesn't allow you to use knock. I have the same issue as well...well i guess it's not an issue...it's a feature.
Sent from my LG-H901 using Tapatalk
Click to expand...
Click to collapse
Knock Code is a security method, Knock On is a feature that LG implemented at kernel level to wake up/turn off the device. The issue that we've been having is with the Knock On not functioning anymore.
Long story short the reset restored Knock On (wake).
Long version, I gave the LG Bridge software a shot to do a backup to the PC.
It let me backup just about everything including apps and data, including Humblebundle apps and stock homescreen layouts, so it's probably as close to tatanium as you ca get.
I Haven't gone through updates yet but so far Knock On is still working after a restore, I'll edit if that changes. *crossing fingers*
oh man I'm glad i came to peek this section for this, as i feel like i tapped something wrong in the hidden menu as well. i might wait a little bit to do a reset and see if someone finds out a way to keep the KnockON thing running when screen is off.
joachim123 said:
oh man I'm glad i came to peek this section for this, as i feel like i tapped something wrong in the hidden menu as well. i might wait a little bit to do a reset and see if someone finds out a way to keep the KnockON thing running when screen is off.
Click to expand...
Click to collapse
hey someone on another thread said that deleting all the fingerprints solved his Knock ON issues. Can you try this out?
baymon said:
hey someone on another thread said that deleting all the fingerprints solved his Knock ON issues. Can you try this out?
Click to expand...
Click to collapse
Just tried it, no luck. Both knock on and off are still not working.
The issue started for me last night after going to the hidden menu and enabling Fast Dormancy. Disabling it again doesn't help. I guess just avoid the hidden menu is the takeaway here.
Sent from my LG-H901 using XDA Free mobile app
pakraider said:
Just tried it, no luck. Both knock on and off are still not working.
The issue started for me last night after going to the hidden menu and enabling Fast Dormancy. Disabling it again doesn't help. I guess just avoid the hidden menu is the takeaway here.
Sent from my LG-H901 using XDA Free mobile app
Click to expand...
Click to collapse
ok, sorry bud. Hard reset did the trick for me, but it'll be good to know what caused this and what can we do to solve it.
Now that you mentioned it, I think my issue started after I was playing around with hidden menu as well. Although I didn't recall changing anything.
baymon said:
ok, sorry bud. Hard reset did the trick for me, but it'll be good to know what caused this and what can we do to solve it.
Now that you mentioned it, I think my issue started after I was playing around with hidden menu as well. Although I didn't recall changing anything.
Click to expand...
Click to collapse
Yeah, tbh it sounds like a software bug by LG. Just going to the hidden menu seems enough to break the knock on/off. Makes you wonder what else might be getting messed up too that we haven't noticed.
p.s. this thread is why XDA is awesome.. everyone thinking 'omg what happened?' only to see others in exactly the same boat.
This makes sense. I think my knock on stopped working after using the hidden menu to look at the dB on the LTE signal.
Sent from my SM-N900T using Tapatalk
So in this case of resetting, would I be able to just grab the system img and flash it without actually doing a hard reset? I don't want to have to set up everything, again.(i had forgotten it was going to reset when I unlocked the BL)
Just confirmed it. Knock on breaks when you try to enter the ims settings menu inside the hidden settings menu. It crashes, then knock on stops.
Sent from my SM-N900T using Tapatalk
I am having an issue where it is grayed out and stating something else has an administrator lock. Any idea on what's holding it up?
Sent from my LG-H901 using XDA Free mobile app
MacMitten said:
I am having an issue where it is grayed out and stating something else has an administrator lock. Any idea on what's holding it up?
Sent from my LG-H901 using XDA Free mobile app
Click to expand...
Click to collapse
That looks like you are in the android pay security options. If so, android doesn't think that knock is secure enough for androidpay. Don't think there is anything we can do about it yet.
If you decide to use android pay you cannot use KnockOn pattern unlock to open your phone.
Sent from my LG-H901 using Tapatalk
Hello!
I recently switched to the m4 from my trusty LG OG, an it is perfect except for one thing... it doesn't ring.
I have tried all Sony-solutions, including PC software repair, etc... but no joy. My wife also has an M4 and has the same problem.
It is worked-around by using a 3rd party lockscreen (I use Hi-Locker), which is awesome.. but not ideal due to security problems, most notably Android Pay.
My question?
Can I replace the lockscreen at the ROM level? Can I replace the basic function with maybe a lockscreen from the Z5?
Unless someone knows how to fix this
I have never compiled my own rom, but I have a reasonable level of tech-savvy. I can flash ROMS and do work in Linux.
I have rooted and unlocked my bootloader, and I am using Stock Sony ROM
I have the latest firmware
Kernel 3.10.49
build 26.1.A.2.99
I have NOT tried using an old firmware- or an alternate ROM. I probably will, but my wife doesn't love the idea for her. Thus, I would like to work out a precision fix.
My thoughts?
Idea 1. find where the stock lockscreen/security module lives.. and try and replace with something from a different phone.
Possible?
Thank you for reading.. I know some other people have these problems, as I read them in threads here.. but I didn't find much in the way of fixing.
just for reference- THIS is the problem.
just for reference- THIS is the problem.
Mustang243 said:
My phone doesn't ring when it 's locked. If phone is unlocked ringtone rings and vibrates. When it's locked no sound or vibrate. Whatsapp messages vibrate but they have no notification sound. I have checked all the settings, volume is up. Last resort is factory reset but i'm not there yet. I don't wanna lose all my settings.
E: Okay I used Sony PC Companion and used the Fix phone/tablet -thing and it downloaded the firmware and installed it so I think it reset my phone. Still my phone doesn't ring if its locked. If I press the power button when someone is calling to me, I can see the lockscreen notification on the screen but it doesn't ring or vibrate. FFS. Any ideas guys?
E2: I guess I find a solutions. Or a temporary solution. I noticed that if I disabled the screen lock, my phone would ring and vibrate normally. So I decided to try and download "Next" lockscreen app. Guess what. When I use it, my phone works perfectly. I don't know why it stopped ringing because there wasn't any new updates from Sony but it's clearly problem in Sony's software.
Click to expand...
Click to collapse
Mustang243 said:
I still have the "silent phone" issue with this update. I have to use third party lock screen app. If I use Sony's lock pattern or pin code and use my gf's phone to call my phone: screen doesn't wake, no ringtone can be heard and no vibration. When I press power-button I can see that someone's trying to call me. Anyone else experiencing this problem? I hope you understand what I tried to say, the issue is kinda hard to explain.
Click to expand...
Click to collapse
Yeah this is a huge problem and we're not the only ones suffering from it. Now I use CM Locker because Next drained my battery. I also noticed that my phone works fine if I boot on safe-mode. Still haven't figured it out which app causes the problem. Gotta wait for the 6.0 update and hope that fixes things.
Same issue with out-of-the box...
Well, have M4 'out of the box' - meaning - no custom software installed, no customized ROM, no custom lock-screen... and well - to make the ring work back I have to restart phone every few days (as soon as realize that it's not working) - oh Sony, what should I say ....
So I've tried everything I can think of, without voiding warranty, to fix this.
One day the phone was turned on and the fingerprint sensor didn't work. Fine, but checking the settings, it was gone there too! There were some residual settings like the "suggestions" for "Screen Lock" that suggested "unlock with your fingerprint". However, clicking that immediately returns me to settings. It's like the fingerprint sensor and settings have vanished.
Now, I've tried factory resets. I've even reinstalled the current firmware, but nothing seems to be working...
GetAlife13 said:
So I've tried everything I can think of, without voiding warranty, to fix this.
One day the phone was turned on and the fingerprint sensor didn't work. Fine, but checking the settings, it was gone there too! There were some residual settings like the "suggestions" for "Screen Lock" that suggested "unlock with your fingerprint". However, clicking that immediately returns me to settings. It's like the fingerprint sensor and settings have vanished.
Now, I've tried factory resets. I've even reinstalled the current firmware, but nothing seems to be working...
Click to expand...
Click to collapse
I would guess the hardware is broken.
ante0 said:
I would guess the hardware is broken.
Click to expand...
Click to collapse
:good: It is likely a hardware failure.
Hi, did you solve the issue? Same thing happened to me. Was it a hardware or software issue?
After applying the last Software Update on my Huawei mate 10 pro the fingerprint sensor started to work randomly. Sometimes it works and then it does not. I do not think it is a matter of hardware otherwise it wouldn't work at all. What can I do to solve the problem?
Aargueta said:
After applying the last Software Update on my Huawei mate 10 pro the fingerprint sensor started to work randomly. Sometimes it works and then it does not. I do not think it is a matter of hardware otherwise it wouldn't work at all. What can I do to solve the problem?
Click to expand...
Click to collapse
Id take it to the service center and have them take a look at it .... Hopefully both replace the sensor and flash the proven working os to the board. With the latest updates I lost the game boost app in the same way that you are describing loss of the f sensor. It dissapeared from system all together, not frozen , not disabled , just gone and all reference to it removed from settings. I flashed couple firmwares since then trying to both downgrade and fix it but no matter what version I was on it never returned lol. It died on 6th/7th flash - hard brick and Im picking it 2morrow from service . All in all , since 9.0 , 9.1 certain issues I had there seemed to follow through every subsequent firmware update. If it doesnt work now it prolly will be bugged in the future as well by that logic. My erecovery was also broken ( Everything works but it never can find firmware to download ) when I started and just like gpu boost it never returned . When I gave them phone under warranty few times back they basically replaced whatever I complained about , back cover, display , battery , charging port , headphone adapters all free of charge
Huawei Mate 10 Pro Fingerprint is not working after EMUI 10.0 Update
My FINGERPRINT ID is not working after the Software Update to EMUI 10.0. Now I cannot unlock my phone using fingerprint. Fingerprint menu too is missing in the Biometrics & Passwords menu of Settings. My fingerprints have vanished from my phone together with the option to input new fingerprints. When I go to the SETTINGS menu, I see nothing related to FINGERPRINTS. In other words, FINGERPRINT ID is not a method of unlocking my phone according to the SETTINGS.
I downgraded the phone to EMUI 9.1, but nothing changed. So, again I updated the software to EMUI 10.0. I cannot understand why this is happening so. It is Huawei. World's No. 2 phone manufacturer trying hard to be the No. 1. World's largest communication equipment manufacturer. It is a shame. It is a total failure of HUAWEI. I handed over the phone to the Huawei Service Centre in Sri Lanka. For two days, they are "STILL CHECKING".
Problems happen! With all the brands!
Me and many others updated to EMUI 10 without any problems.
When I update to other Android OS version, I always do a factory reset, just to avoid any possible problems.
Problems happen! With all the brands!
Me and many others updated to EMUI 10 without any problems.
When I update to other Android OS version, I always do a factory reset, just to avoid any possible problems.
SirDaemon said:
Problems happen! With all the brands!
Me and many others updated to EMUI 10 without any problems.
When I update to other Android OS version, I always do a factory reset, just to avoid any possible problems.
Click to expand...
Click to collapse
I did a factory Reset too after the software update to EMUI 10.0. But no change at all.
Might be a coincidence, or not. Maybe something in the flash process went wrong.
SirDaemon said:
Might be a coincidence, or not. Maybe something in the flash process went wrong.
Click to expand...
Click to collapse
Yes, it may be a coincidence or may be something gone wrong in the flash process. But the problem is that this has happened to many other people through out the world. Also, many people complain about various other problems after the software update. That means Huawei has failed to provide their customers an accurate and safe process to update their software. It is a serious failure from the part of Huawei, the second largest mobile phone manufacturer in the world.
The finger print problem solved in my Mate 10 pro
100 % its software problem after android 10 update am reset all setting twice and now the finger print work with out any problems
Happened to mine as well.
Decided to update over weekend and fingerprint id has vanished from settings.
Tried to reset several times but no luck.
Just as the title reads. Updates the fingerprint with cool animation.
Thanks for the information about the new firmware update for the new Bold-N1!
After comparing this new Bold-N1 with the BLU-XI+ (with 6GB of RAM), which I also have, I have noticed that apparently due to the low 4GB of internal RAM... That most negative and annoying thing when using this new BOLD-N1 is its bad management of it's RAM Memory, which BOLD should urgently solve in an upcoming update, because there are other similar phones with also 4GB of RAM that handle this memory much better when running several applications at the same time.
So I expected BOLD to do something to improve, the handling of the RAM in the BOLD-N1 ...
Apart of Updating the fingerprint with cool animations, Do you know if there any other fixes or enhancements?
I just wanted to add that it lost root with this update, but was able to flash my old modified boot image with no negative effects. I thought it might cause a boot loop, but it works fine.
im not currently on the stock rom, so i cannot do it. Has anyone managed to copy the update file, before it being installed?
Ok I asked and got a response. Here is the update package.
https://android.googleapis.com/pack.../404ed8bd09ac64e1c9a1252713be24abff463f81.zip
Possible warning
Not confirmed yet. But it is possible this update is changing the preloader , making sp-flash tool no longer connect without signed images.
Someone who has already installed the update, can you confirm if flash tool still allows flashing?
Fingerprint scanner activating on picking up the phone
Anyone know if there's a way to disable the fingerprint scanner activating any time I pick up the phone now? Never did that before the update, it's pretty annoying. Already have lift to wake turned off, but that doesn't fix it. Went through every setting and didn't see a way to fix it.
paulson64 said:
Anyone know if there's a way to disable the fingerprint scanner activating any time I pick up the phone now? Never did that before the update, it's pretty annoying. Already have lift to wake turned off, but that doesn't fix it. Went through every setting and didn't see a way to fix it.
Click to expand...
Click to collapse
Pretty sure that would be under the "lift to wake option" found in settings->Intelligent Assistance->Lift to wake
See if the switch is set on and toggle it off. Mine isn't and my scanner doesn't activate when picking up
no99sqrd said:
Pretty sure that would be under the "lift to wake option" found in settings->Intelligent Assistance->Lift to wake
See if the switch is set on and toggle it off. Mine isn't and my scanner doesn't activate when picking up
Click to expand...
Click to collapse
Nope, that isn't it. That's off now, and was off before the update, and this only started happening after the update.
paulson64 said:
Nope, that isn't it. That's off now, and was off before the update, and this only started happening after the update.
Click to expand...
Click to collapse
weird - I'm not having that problem
Apart of the Security Update and adding some cool Animations to the On-Screen Fingerprint Scanner...
I have also noticed that after the updating we are now able to turn ON or OFF Adaptive Brightness directly from the slide down menu.
paulson64 said:
Anyone know if there's a way to disable the fingerprint scanner activating any time I pick up the phone now? Never did that before the update, it's pretty annoying. Already have lift to wake turned off, but that doesn't fix it. Went through every setting and didn't see a way to fix it.
Click to expand...
Click to collapse
Please, anyone? This seems to really be killing my battery life, I'm getting down to 10 percent now, when before the update I would be down to about 40-50 percent with the same amount and time of use after this update.
I just updated my bold n1 with the new security patch and I don't know if this was available before hand, but I noticed that the fingerprint reader now appears on the bottom of the screen just by lifting the phone up. I don't remember it doing that before.
paulson64 said:
Please, anyone? This seems to really be killing my battery life, I'm getting down to 10 percent now, when before the update I would be down to about 40-50 percent with the same amount and time of use after this update.
Click to expand...
Click to collapse
lol so I've seen ur post and never understood what u were saying and this is for all of us for ignoring u sorry lol so to fix ur problem u actually have to press lift to wake to get ur phone the way u want it I just turned mine off for the first time and it acts like u describe in ur post soooo basically just turn the lift to wake option on but I actually like the way u have it no battery drain for me