Hello from Australia,
I recently purchased the Redmi Note 4 (Global) and absolutely love it! After owning iPhone for the last 8 yrs I am finding it very refreshing. I am looking forward to being part of this Android community
My questions is this - I am very keen on rooting the device but have also found that there is a pending update to 8.5.4.0 (Miui) and 7.0 (Nougat). Will I still be able to root it after I update and if so where is the best guide for me to do this?
Many thanks
Waverley73
Waverley73 said:
Hello from Australia,
I recently purchased the Redmi Note 4 (Global) and absolutely love it! After owning iPhone for the last 8 yrs I am finding it very refreshing. I am looking forward to being part of this Android community
My questions is this - I am very keen on rooting the device but have also found that there is a pending update to 8.5.4.0 (Miui) and 7.0 (Nougat). Will I still be able to root it after I update and if so where is the best guide for me to do this?
Many thanks
Waverley73
Click to expand...
Click to collapse
yes, you can root it after updating to 7.0. First unlock bootloder. Install twrp recovery. and then flash SuperSu zip.
Note-Dont forget to flash lazyflasher-no-verify-opt zip after flashing twrp or you would go into bootloop.
[email protected]!$h said:
yes, you can root it after updating to 7.0. First unlock bootloder. Install twrp recovery. and then flash SuperSu zip.
Note-Dont forget to flash lazyflasher-no-verify-opt zip after flashing twrp or you would go into bootloop.
Click to expand...
Click to collapse
Hello, and many thanks for your quick reply. Good, I had this guide that I was going to follow but then found out about my pending update:
EDIT - sorry, had to edit the url link as I'm a new user. h t t p ://en.miui.com/forum.php?mod=viewthread&tid=667496
Do you think this is the right steps for me to follow? also, I have never flashed or tweaked an Android phone so don't know how to do the flashing of lazyflasher-no-verify-opt zip. I don't see that in the steps. How exactly do I do that? Do you have a link?
Thank you.
Waverley73 said:
Hello, and many thanks for your quick reply. Good, I had this guide that I was going to follow but then found out about my pending update:
EDIT - sorry, had to edit the url link as I'm a new user. h t t p ://en.miui.com/forum.php?mod=viewthread&tid=667496
Do you think this is the right steps for me to follow? also, I have never flashed or tweaked an Android phone so don't know how to do the flashing of lazyflasher-no-verify-opt zip. I don't see that in the steps. How exactly do I do that? Do you have a link?
Thank you.
Click to expand...
Click to collapse
steps given in the guide are almost correct.First unlock bootloader which is the biggest hassle in whole process. Probably you wont be able unlock bootloader in first few tries as mi unlock tool will probably stuck at 99% and show error "account not binded to device".You can wait a few days and try again but i dont think that will work. To solve this problem what i did was-
download miui developer rom version 7.2.16 link-http://bigota.d.miui.com/7.2.16/miui_HMNote4XGlobal_7.2.16_e6eed016d8_6.0.zip
Now go to updater app choose downloaded zip as update package. Now updater would start decrypting it and your phone will be updated to developer rom. Now when on developer rom go to updater app and there will be an ota for latest version, update.Now when on latest developer version try to unlock again using mi unlock tool. I dont know if it will work for you but it worked for me.
Now your bootloader is unlocked, go to mido section in xda forums and download twrp for redmi note 4. To flash twrp recovery, there are many ways. process given in your guide may also work.But what I did was downloaded "mini flasher" link-"https://forum.xda-developers.com/devdb/project/dl/?id=25193&task=get" install mini flasher.choose install twrp, browse to the recovery image you downloaded and it will automatically flash it and reboot your phone to recovery.
Now when your phone is in recovery mode coose 'install'
choose the lazyflasher zip file you earlier downloaded. now reboot. again go to recovery install SuperSu zip file(link given your guide) reboot. your phone will probably bootloop one time but dont worry it is fine. now when your phone reboots it is rooted.
Well I sucessfully updated the phone to Nougat and it was very easy.
Now I have tried to unlock the bootloader but keep getting this message:
您所在的IP申请次数超标
I have googled it and it says I have tried too many times from my IP address. But I haven't - this was the first time. I have tried 3 times, with the same result.
Does anyone know how to get around this problem?
Thanks
The nougat update eats to much ram I got only 1.3 GB free ram
You could try Miui 9 beta channel after miui 8.5 update without unlocking or rooting. Just had to download the miui 9 recovery rom package. Place it in folder named downloaded-rom. Backup your imp data before proceeding. Goto the updater app or settings about, tap three dot menu. Choose update and select the downloaded file. It will erase all your data and update to miui 9.
They release updates weekly. And battery backup is outstanding.
https://forum.xda-developers.com/showpost.php?p=73086754&postcount=124
Anyone able to help with this? I have read it is a common issue for it to incorrectly say you have had too many attempts but not really any conclusive answer as to how to get around the problem.
I am really keen on unlocking my bootloader. Thanks in advance.
INTRODUCTION
I posted my configuration before inside a couple of threads. After that, I have received a lot of questions about the same issues. I have also been asked to create a thread so newbies could have an easy way of having an Oreo system up and running in the Axon 7. So I am doing it. Newbies will have an easy entry point to the world of custom Oreo ROMs and a single point to clarify any question. We have a healthy and active Axon 7 scene here at XDA. This guide provides a path to have a custom Oreo system with the latest features available for this device requiring a minimum effort. It applies to any of the 3 Axon 7 flavors: A2017 (China), A2017G (Europe) and A2017U (Americas) with any memory and storage capacity. At this time there are 3 groups of ROMs depending on the Bootstack and GSI support:
1. B32+B10 ROMs use the reliable Nougat bootstack. They are very stable and battery efficient. On the other hand, none of them support dual SIM or HDR+ camera. However they support HDR and Camera2 API.
2. B12 without GSI support ROMs use the Oreo beta B12 bootstack. Full support for Camera2 API and HDR+ but very poor battery performance and stability issues.
3. B12 with GSI support ROMs also use the same Oreo beta B12 bootstack. They also require a separated vendor partition. They share the same benefits and limitations of the previous group. So far they are experimental and the Treble ROMs don't support yet all the Axon 7 Hardware when using them along with a GSI image. They are examples of a Work-In-Progress that is yet to be finished.
WHAT THE HECK IS TREBLE AND GSI?
Since Oreo, all the new devices must have a separated vendor partition to fulfill Google's Treble project requirements. This way the OS is structured in two parts:
1. Treble ROM: includes all the device drivers and vendor related files in the vendor and boot partitions. The Treble ROM is owned and updated by the device vendor or a custom ROM developer.
2. Generic System Image (GSI): Includes the Android OS, it is controlled by Google and allow generic and frequent security and system feature updates directly from Google. It uses the system partition.
So far, custom Android distributions such as LineageOS, Resurrection Remix, AOKP, Dirty Unicorns, AEX, etc... had to create specific ROMs for each supported device. This was painful and it all was depending on the willingness of a developer to maintain a version for each device. Thanks to Treble project, now Android distributions just release a single GSI able to be installed in any device using a Treble ROM. This way they can properly maintain all the devices with a single GSI image by focusing on frequent updates of a single GSI. These custom distributions will also deliver the security and feature updates by Google. So a fully Treble ROM for the Axon 7 will open the door to virtually all the Android distribution out there.
@NFound in the AEX ROM thread) is the only one working in developing a Treble ROM for our device. He has released some incomplete Treble ROMs coupled with non-generic system images. Others like @Kranoner in the Hellsgate Kernel thread or @OrdenKrieger in the LineageOS 15.1 are building and kindly sharing unofficial releases of several custom Oreo 8.1 ROMs that are used in the EDL packages below.
@Victor13f has also created guides on how to install the leaked Stock Oreo 8.0 Beta B12 ROM. I really advise to upgrade to any of the current Oreo ROMs since the current unofficial releases work way better than the previous Nougat versions. The custom AOSP Oreo 8.1 ROMs offer a wider spectrum for tweaking for better performance and battery. Custom kernels are adding full featured and optimized drivers for custom ROMs. They support almost everything, including backported drivers from the latest Linux 4.xx official kernel sources.
BACKUP:
Please note that a dirty flash won't work when coming from any non Treblerized Axon 7 (Axon 7 without the vendor partition). So, if you want to keep your information, then you should do a backup of your data before continuing with this guide. You can use the file manager to move your Documents, Downloads, Music, Pictures, Videos, etc... from your internal storage to an external SD card. You can upload them to a cloud service such as Google Drive, One Drive, MEGA, DropBox, etc. Or use the USB connection to move your information to your PC.
DEVICE UNLOCK:
Unlocking your bootloader will trigger a factory reset, and will delete the internal storage along with all the information in your phone. If your Axon 7 bootloader is still locked, you have to follow this guide before proceeding to the rest of this guide. It works for Marshmallow and Nougat stock phones. Please use that thread to ask any question related to unlocking your device.
INSTALLATION INSTRUCTIONS:
WARNING, THIS GUIDE WILL WIPE ALL THE DATA IN YOUR DEVICE, INCLUDING THE INTERNAL STORAGE.
IT REQUIRES YOUR DEVICE TO BE UNLOCKED, OTHERWISE YOUR DEVICE COULD BE BRICKED.
!!! Whatever you do, it is at your own risk !!!
In case you get stuck at any point in this guide, do not panic! There is a straightforward way to go back to stock. Just follow this Unbrick/Restore guide. I've tried to make things as easier as possible for everyone, specially newbies not used to deal with the Axon 7. So, I have created stable custom EDL packages. In order to reduce the risk and complexity, this one Stop ROM Shop performs all the following actions in a single flash:
- installs TWRP custom recovery
- installs my customized Bootstack
- removes unlocked bootloader annoying warning message.
- installs custom Oreo ROM.
- installs google apps.
- installs custom kernel.
- installs magisk root
- creates vendor partition to treblerize your phone, this way it will be futureproof.
- formats vendor partition as ext4 filesystem to complete the previous task.
- And the guide also helps you to format data and cache as f2fs in case you haven't done it already. It provides better battery, performance and extends the lifespan of the internal flash.
I provide here 2 basic EDL package options. Both of them include the vendor partition so you won't have to perform any additional formatting and backup when upgrading to treble roms. Both options are this way future proof, just choose one of them:
OPTION 1: B32+B10 based EDL Package if you prefer stability. It includes:
- N+O custom Bootstack (B32+B10)
- TWRP 3.2.1-7 recovery by NFound
- Resurrection Remix Oreo 6.0.0 2018.05.11 ROM By Kranoner
- Google apps (ARM64, 8.1, micro)
- HellsGate v3.0 Kernel by Kranoner
- Magisk root 16.7
OPTION 2: B12 based EDL Package If you require dual SIM or full support for HDR+ camera apps. It includes:
- O custom Bootstack (B12)
- TWRP 3.2.2 recovery
- AEX 5.7 20180711 ROM by NFound
- Google apps (ARM64, 8.1, micro)
- HellsGate X12 GClang Kernel by Kranoner
- Magisk root 16.7
Once you had chosen your preferred option then proceed with these steps:
Download and Un7zip the chosen package to a folder in your computer, ensuring there are no errors. I have an A2017U, so the American modem is the package default. If you have an A2017 or A2017G just copy your modem firmware, from the corresponding provided modem subfolder, to the main folder. Just overwrite the default American modem file.
Install MiFlash in your PC. It includes the Qualcomm Snapdragon SoC drivers, nonetheless you can always install the latest Qualcomm drivers.
Enter EDL mode using one of the following options:
by pressing VolUp+VolDn+Power until the power led flashes briefly
Installing a terminal app and typing reboot edl at the app prompt.
connecting your phone to your PC and typing adb reboot edl at your computer's command prompt.
While your phone is completely off, press VolUp+VolDn while connecting your phone to your PC.
If you haven't done yet, it's time to connect your phone to your computer.
Open MiFlash in your computer.
Click Browse button and select the folder you created with the firmware files.
Click Refresh button and your device will appear listed as virtual COM port.
Click Flash button and wait for a few minutes until it finishes. Note the bottom options are not applicable.
Wait a few seconds until the boot animation begins and press again VolUp+Power until the phone vibrates to enter again into recovery. Go to Advanced > Terminal and now type: reboot "dm-verity enforcing"
Press VolUp+Power until the phone vibrates to enter into recovery, then release both buttons. Go to Advanced > Terminal and type: reboot disemmcwp
Wait a few seconds until the boot animation begins and press again VolUp+Power until the phone vibrates to enter again into recovery for a 3rd time. To ensure everything is clean you should format the DATA partition, including internal storage. Go to settings and ensure "Use rm -rf instead of formatting" option is not selected. Then go to Wipe > Advanced Wipe, select Data partition and tap on Repair_or_Change_File_System button and then on Change_File_System button. Select F2FS and confirm action. Do the same to apply F2FS to the Cache Partition. Now, from the main menu > Wipe, select and clean dalvik.
NOTE: If you receive an error while formatting data, then go to Wipe > Advanced Wipe, select Data partition and tap on Repair_or_Change_File_System button and then on Change_File_System button. Format DATA as EXT4 first and, without leaving TWRP do it again as F2FS. That will fix the issue.
Go to main menu and reboot system.
Complete the setup process so you can continue with the rest of the customizations not included in the basic package:
SOUND EXPERIENCE:
The following steps will provide you with Dolby ATMOS and Viper4Audio pre-processors along with the HiFi DAC output. Please note that the activation of these features will drain your battery faster since both will use your CPU. Nonetheless the benefits are evident. if you want to fully enjoy the audio capabilities of the Axon 7 you should go ahead and use them. The steps are:
Download Mixer_AK4490.zip and Dolby-Oreo.zip to your phone.
Open Magisk Manager app, go to the Download section and Download (do not install yet) Ainur Sauron, Viper4Android FX and Audio Modification Library.
Reboot to recovery the same way you did during System installation, press install, navigate to /sdcard/MagiskManager folder and install Ainur Sauron, Viper4Android (I prefer 2.5.0.5 and traditional interface, however it is all up your personal preference) and Audio Modification Library zip files in that order. Do not reboot after flashing these files, just navigate now to the /sdcard/Download folder and flash Dolby-Oreo.zip and Mixer_AK4490.zip
SCREEN COLOR ENHANCEMENT:
Download and install KCAL Color Calibration/enhancement app. I only modify the Saturation to 62 to get amazing vibrant colors from this AMOLED screen, nonetheless this is a very personal configuration. At the end this has to please your own eyes. . This app optional since Kernel Adiutor and EX Kernel Manager apps can also configure Qualcomm SoC Color Control.
AVOID BATTERY DEGRADATION:
Install Battery charge Limit [ROOT] app. Open it and set Limit charge to 85% and recharge below 79%. Do you want to avoid your battery to wear as the time go by? do not miss this guide to understand why this step is so important for the health of your device.
BETTER CAMERA:
+ Snap Camera App
I am using, and heavily recommend the paid version of Snap Camera HDR. It supports Camera2 API with full manual and HDR support. Find recommended settings here.
Testing now GCAM v4.0. Nonetheless so far I am just starting testing.
Bacon Camera is another Camera I am now actively testing.
The next level of this guide will provide with instructions on how to change recovery, ROM, kernels and all the details and options you have. It is late today so I'll finish it later.
Hope it helps. I will be updating this guide in the future as soon my configuration changes or I find new technologies, apps or patches. If you know about a better option just post your suggestions!
Thanks and credits go to @NFound, @Kranoner, @Infy_AsiX, @roisuke, @Skrem339, @djkuz and you too for bringing up issues and valuable solutions.
Yes! I almost pm'd you like 3 times to ask if you would do exactly this. By far, I am not a noob, but honestly, i can finally take the plunge now knowing i have a place to look back and proper steps. I still have yet to flash TWRP 3.1.1-7 because of the [no bet removing inscription] bit on that thread, but reading over it like a dozen times, im fairly confident the only thing that will not work correctly on my a2017u is removing the warning that my bootloader is unlocked. Correct me if Im wrong on that one. Thank you, @Oki. Many thanks, brother.
kitcostantino said:
Yes! I almost pm'd you like 3 times to ask if you would do exactly this. By far, I am not a noob, but honestly, i can finally take the plunge now knowing i have a place to look back and proper steps. I still have yet to flash TWRP 3.1.1-7 because of the [no bet removing inscription] bit on that thread, but reading over it like a dozen times, im fairly confident the only thing that will not work correctly on my a2017u is removing the warning that my bootloader is unlocked. Correct me if Im wrong on that one. Thank you, @Oki. Many thanks, brother.
Click to expand...
Click to collapse
Removing the message at boot is easy. If you already have TWRP Exclusive v3.2.1-7 and the aforementioned bootloader, then you just have to boot TWRP Advanced menu > More > Del inscription. Easy, Isn't it? It works in my A2017U so It should work for you too.
Oki said:
Removing the message at boot is easy. If you already have TWRP Exclusive v3.2.1-7 and the aforementioned bootloader, then you just have to boot TWRP Advanced menu > More > Del inscription. Easy, Isn't it? It works in my A2017U so It should work for you too.
Click to expand...
Click to collapse
This was actually why:
NFound said:
TWRP Exclusive™
For "U" models pacth cleaning inscriptions bootloader NO BET!
Warning! "Del Inscription" - only for A2017 and A2017G !!!
Click to expand...
Click to collapse
^^^^^^^^This was actually why I thought it didn't work. Honestly, I don't mind the warning. I just had to ascertain if that was the only issue. Nfound had already confirmed it worked on a2017u. And removing that warning hasn't ever mattered to me that much.)
kitcostantino said:
This was actually why:
^^^^^^^^This was actually why I thought it didn't work. Honestly, I don't mind the warning. I just had to ascertain if that was the only issue. Nfound had already confirmed it worked on a2017u. And removing that warning hasn't ever mattered to me that much.)
Click to expand...
Click to collapse
Well NFound just tried to say that his solution was not tested at that time in an A2017U. Actually the 2017U is unbrickable thanks to the hardware EDL mode of the Qualcomm SOC.
By the way, I have updated the OP. Now it matches my current configuration. I have also mentioned my current testing efforts in the battery and camera areas.
Regards
Hi. Any fix for Dual Sim? I read through XDA and it seems dual sim is still not fixed. I am getting tired with nougat ROMs but without dual sim I have to stick with it...
@kitcostantino, there's also another method to get rid of that startup message that might work.
http://forum.xda-developers.com/showthread.php?p=74445757
ZTE Axon 7 A2017U, AospExtended v5.4 ROM, HELLSGATE Kernel, Multiboot, Tapatalk 4.9.3
Hello,
just a little question: Does this guide work on the Axon 7 2017G too? The RR Oreo Rom are for the 2017U....
Thx
Dave_XDA said:
Hello,
just a little question: Does this guide work on the Axon 7 2017G too? The RR Oreo Rom are for the 2017U....
Thx
Click to expand...
Click to collapse
Yes, the guide is valid for any Axon 7 flavor: Chinese, Euro and Americas.
marcdw said:
@kitcostantino, there's also another method to get rid of that startup message that might work.
http://forum.xda-developers.com/showthread.php?p=74445757
ZTE Axon 7 A2017U, AospExtended v5.4 ROM, HELLSGATE Kernel, Multiboot, Tapatalk 4.9.3
Click to expand...
Click to collapse
It is actually the same method. TWRP flashes that aboot image when selecting the option I mentioned. I still see the TWRP method a lot better since it doesn't require any extra download. You can see all the images and add-ons when exploring the filesystem while in TWRP Exclusive.
Thx for your answer.
I got this Axon 7 from my brother with the AEX Oreo Rom install'd. I wanne try out the RR Oreo because i use'd the RR on my old ASUS Phone.
Do i need to install the Bootloader you linke'd in your guide or can i install the RR Oreo with a clean install over the AEX Oreo Rom?
Thx again
Dave_XDA said:
Thx for your answer.
I got this Axon 7 from my brother with the AEX Oreo Rom install'd. I wanne try out the RR Oreo because i use'd the RR on my old ASUS Phone.
Do i need to install the Bootloader you linke'd in your guide or can i install the RR Oreo with a clean install over the AEX Oreo Rom?
Thx again
Click to expand...
Click to collapse
There is no problem as long you have an Oreo Bootloader. Since you are already running a custom Oreo ROM it means you already have a valid bootloader. Thus, you only need to flash the RR-O ROM. Should you find any problem you can just flash the latest bootloader I link in the OP or go back to AEX. It is important to do a clean install when switching Oreo flavors, as you plan, otherwise you will face problems.
Thanks for this. Been running stock since I got the phone, but missing the old phone days where I used to flash something new like once a week. Gonna try this out tonight I think. Really appreciate the concise directions
Are there known issues in returning to B35 Stock, should the RR(O) prove unsatisfactory?
amphi66 said:
Are there known issues in returning to B35 Stock, should the RR(O) prove unsatisfactory?
Click to expand...
Click to collapse
No issues, you can always go back to B35.
Oki said:
It is actually the same method. TWRP flashes that aboot image when selecting the option I mentioned. I still see the TWRP method a lot better since it doesn't require any extra download. You can see all the images and add-ons when exploring the filesystem while in TWRP Exclusive.
Click to expand...
Click to collapse
Thanks for the info.
Never used/explored TWRP Exclusive's extras really. In my environment I might break something [emoji39] but cool that everything is there.
ZTE Axon 7 A2017U, AospExtended v5.4 ROM, HELLSGATE Kernel, Multiboot, Tapatalk 4.9.3
How long does the first boot after flashing the bootloader take? I don't seem to get past the ZTE powered by android screen.
Never mind. Just hold Power + Volume Up at boot.
Thanks !! Oreo AND RR together !!
I will flash it tomorrow on my A2017G !!
(maybe you should write the A2017G compatibility on the first page because this :
RR-O-v6.0.0-20180422-axon7-Unofficial.zip
for the ZTE Axon 7(2017U), by Kranoner
on androidfilehost almost made me missed it )
EDIT : Does this ROM+kernel have the dualsim problem ?
Oki said:
Removing the message at boot is easy. If you already have TWRP Exclusive v3.2.1-7 and the aforementioned bootloader, then you just have to boot TWRP Advanced menu > More > Del inscription. Easy, Isn't it? It works in my A2017U so It should work for you too.
Click to expand...
Click to collapse
After doing this, I can't unlock my phone after restart by entering password. On A2017U and AEX Oreo latest. Any1 had this issue?
If anyone does, here's the fix: https://forum.xda-developers.com/axon-7/help/to-remove-screen-unlock-pattern-t3768575
ashishv said:
After doing this, I can't unlock my phone after restart by entering password. On A2017U and AEX Oreo latest. Any1 had this issue?
If anyone does, here's the fix: https://forum.xda-developers.com/axon-7/help/to-remove-screen-unlock-pattern-t3768575
Click to expand...
Click to collapse
What have you really done my friend? This guide requires a complete cleanup so it is impossible that you had any locksettings after a clean install. If you follow all the steps and follow the guide then you shouldn't have any problem.
The lock settings get corrupted after migrating to f2fs, and you can also find that problem when dirty flashing some roms or kernels. For that reason, to take care of that step, in the f2fs migration link, there is a link to a very detailed way to cleanup the lock settings. You can find that guide here: https://forum.xda-developers.com/axon-7/how-to/guide-access-locked-axon-7-how-to-t3525403 but, it shouldn't happen when following the steps of this guide. By the way, this guide requires RR Oreo ROM, and you mention you are using AEX Oreo...
I've found a few ways to root the OnePlus 7T Pro in the XDA forum and and wondering which method to go for. I got the phone today and haven't switched it on yet, so am expecting an OTA to be available to download, although I'll unlock the device first.
There's this by @mlgmxyysd which seems to be the newest way:
https://forum.xda-developers.com/7t-pro/how-to/magisk-auto-install-tool-magisk-t4001471
There's this by @HolyChickenGuy, which is older but it seems that you can definitely update Magisk and Magisk Manager this way:
https://forum.xda-developers.com/7t...-3-patched-boot-image-oneplus-7t-pro-t3986351
Only thing I'm not clear about with it is if I can OTA with it first or not but I can probably work that out depending on what software version mine is on, given the post says 10.0.3.
There's this by @ktp1976 which seems like @HolyChickenGuy 's guide but with further steps so possibly is redundant for me:
https://forum.xda-developers.com/showpost.php?p=80591215&postcount=28
Finally this seems the easiest, by @ManikandanGuru, it's for the OnePlus 6 but I would think the principle is the same:
https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853
I.e.,
Even easier way to root without TWRP:
1. Install OTA update (Don't reboot).
2. Open Magisk Manager, install Magisk and choose "Install to Inactive Slot (After OTA)" (Now reboot).
3. Now you are rooted without TWRP and without any boot img hassles as well.
Click to expand...
Click to collapse
Does anyone have any recommendations or advice please? Thank you. Once have root I'll heed the tutorial about preserving root when OTA'ing the phone, sorry I can't link to it because I'm a new member.
Doesn't matter, they all are the same and does the same thing, patching the boot image. (Except for the first one which does other things too)
The first one is for Xposed, if that's something you're not interested to when the holychicken guide.
The other one just explains how to obtain and create your own one, one you've done that you still need to to the steps holychicken guide.
Sent from my OnePlus7TPro using XDA Labs
Good afternoon everyone.
I got interested in putting a custom rom on my Galaxy Note 8 I have laying around (Current Daily driver has been upgraded to a Note 20 Ultra so I have no hurry to fix this issue.)
I followed the steps from one of the forum guides and installed TWRP, the first thing I noticed was that my Note 8 had 2 System directories while this is supossed to be a A only model. (Which struck me as odd.) After installing a android 11 Rom (A Only) I was stuck on the boot screen not loading any further. I found this logical as Android 11 is not really supported as of yet on this model.
I then decided to grab Havoc OS seeing as that was a stable version that should run properly i've seen people on Youtube install it on their S8's without a hitch. After installing this the way the guide told me I got stuck in a boot loop. (Also used an A only ROM) My final attempt will be downloading an A/B ROM and see if that works (Which i genuinly doubt.) but will update this post when that's finished.
On the post I also have added a screenshot of what I see when trying to install an Image. My question to you guys is, does this phone have a A/B configuration after all or am I doing something wrong?
Edit: AB was also not the solution.
After rummaging around a bit more with the phone I found out that i was using an extremely out of date version of the Pie Vendor. I looked at download by Version number instead of by date. Reinstalled Havoc, installed pie vendor.
Now the phone reboots into downloading mode. It's been this way around 10 minutes now will post an update in about an hour or so of leaving it in that state.
QuirkyTechGuy said:
After rummaging around a bit more with the phone I found out that i was using an extremely out of date version of the Pie Vendor. I looked at download by Version number instead of by date. Reinstalled Havoc, installed pie vendor.
Now the phone reboots into downloading mode. It's been this way around 10 minutes now will post an update in about an hour or so of leaving it in that state.
Click to expand...
Click to collapse
Odd. Truly. It could be due to the first install of GSI version. Here's what I suggest.
I hope u have a back up of your old rom, if so, flash it back. If not, check your twrp version. Update it to latest. Flash a non gsi rom. Boot the phone. If it boots and you have it running, then flash a gsi rom .
maxed4901 said:
Odd. Truly. It could be due to the first install of GSI version. Here's what I suggest.
I hope u have a back up of your old rom, if so, flash it back. If not, check your twrp version. Update it to latest. Flash a non gsi rom. Boot the phone. If it boots and you have it running, then flash a gsi rom .
Click to expand...
Click to collapse
I sadly forgot to make a back up of the rom which in hindsight is stupid of me. I did check and have the latest TWRP version, and managed to get LineAge OS 17.1 working without it being Treblized .
Should i now go on with the procedure of trying to flash a GSI rom with the Treble Convert?
QuirkyTechGuy said:
I sadly forgot to make a back up of the rom which in hindsight is stupid of me. I did check and have the latest TWRP version, and managed to get LineAge OS 17.1 working without it being Treblized .
Should i now go on with the procedure of trying to flash a GSI rom with the Treble Convert?
Click to expand...
Click to collapse
Let's take a back up first and then try. Which tutorial are u following.
Install Android 11 (R) On Any Treble Device ( Detailed Guide)
This way you can install Android 11 On any device without the need of waiting for your manufacturer to push the latest update.
xtremedroid.com
And try Google or aosp gsi from here https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Here's @corsicanu thread for instructions.
But it's for android 9? M not sure though
[AOSP][Treble][G95*F/FD] hadesTreble [03.09.2019]
Disclaimer I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it...
forum.xda-developers.com
Hi.
I've bought a new Nord2 and I'm studying to have it rooted. A, maybe numb, question. On my OP 6 to update I download the whole packet (OP itself says root detected so the entire packet will be downloaded) then I update and installing Magisk on inactive slot I have the phone updated and rooted. Is this possible on Nord2? Frow what I've read it seems that only incremental update are released. Any tip before starting root? On my OP6 I don't have TWRP and I don't need it if it's not mandatory.
Thanks a lot
The oneplus nord 2 does not have a stock OS released officially by Oneplus yet, so as of right now, it is not possible to flash a stock OS. The only things we have access to are the incremental update.zips, and whatever images people are pulling right out of their own phones and uploading to others in the community. There's been a few rumours that Oneplus should be releasing full stock os soon, but I've seen no official newso n that front yet so I wouldn't hold your breath.
Secondly, the Oneplus Nord 2 does not have A/B partitions, so there is no inactive slot, so other methods of updating whilst rooted, that works on other AB partition devices does not work on the nord 2.
Thanks for your answer. I thought that A/B partition was standard from Android 9+. If not yes it's a problem... In this way every update requires to root the phone again...