My watch Amazfit gtr2 stuck on logo on startup and not responding at all. Restart6, hardreset everything done but all goes in vain.
Couldn't find any solution yet.
Anyone help / guide me through?
Thanks
Tousiq Malik said:
Mi reloj Amazfit gtr2 se atascó en el logotipo al inicio y no responde en absoluto. Restart6, hardreset todo hecho pero todo va en vano.
No se pudo encontrar ninguna solución todavía.
¿Alguien me ayuda/guía?
Gracias
Click to expand...
Click to collapse
bolsa ojala te ayude el procedimiento q acabo de aderir
Tousiq Malik said:
My watch Amazfit gtr2 stuck on logo on startup and not responding at all. Restart6, hardreset everything done but all goes in vain.
Couldn't find any solution yet.
Anyone help / guide me through?
Thanks
Click to expand...
Click to collapse
Thread closed as a subject matter related thread already exists:
Amazfit GTR2 stuck on logo
Hey all :) Today in the morning watch showed 9% on battery and I placed it to charge and after an 1 hour I came back to check and it was showing Amazfit logo, the one when you boot the device but logo stays forever. If I hold red button to reset...
forum.xda-developers.com
Please review the XDA Forum Rules with special emphasis on rule no. 5 and post in an existing thread instead of creating a new one! Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator
Related
translated with google
Hello. I am Spanish and I'm writing this totally desperate with the help of a translator as only Spanish. I'm sorry for mistakes in my writing.
my samsung galaxy s2 will not start. I was flashing with "odin" when it came out half way through usb. now will not start, no display lights.... I can not get into recovery, or download ...
I can do?
thank you very much
en español
Hola. Soy español y yo estoy escribiendo esto desesperado totalmente con la ayuda de un traductor ya que solo se español. yo lo siento si hay errores en mi escritura.
mi samsung galaxy s2 no enciende. yo estaba flasheando con "odin" cuando se salió el usb en mitad del proceso. ahora no enciende, no hace nada.no enciende la pantalla,ni puedo entrar en recovery, ni download...
que puedo hacer?
muchas gracias
Please use the Q&A Forum for questions Thanks
Moving to Q&A
lufc said:
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Click to expand...
Click to collapse
I'm sorry. is in English and do not quite understand. Thank you.
no one knows?
Google Translation works well .
Broken flash no recovery no download mode .
Possible download mode is via USB Recovery JIG find it on EBay or search XDA .
That fails its a Samsung Service Centre.
jje
JJEgan said:
Google Translation works well .
Broken flash no recovery no download mode .
Possible download mode is via USB Recovery JIG find it on EBay or search XDA .
That fails its a Samsung Service Centre.
jje
Click to expand...
Click to collapse
Thank you. Today I bring the jig. I think it's my last hope. no other method of solution?. is 500 euros to see how trash will be not very nice
Hello, I need help with an amazfit beep, when updating in IOS to the latest version the clock was on screen a message that said "connect app to update resources".
Then I linked the clock to an android and using gadgetbridge install the res 9.40 and then the fw 9.26 then in this last step the clock did not end and it was turned off. Now I can not turn it on or in the charging base.
Help
Nadie te va a responder en este foro ya que solo se habla inglés, edita tu respuesta o escribela en otros foros como HTCMania
Anyone won't respond you because this is an English forum, edit your response or write it on another forum like HTCMania
Hey all
Today in the morning watch showed 9% on battery and I placed it to charge and after an 1 hour I came back to check and it was showing Amazfit logo, the one when you boot the device but logo stays forever. If I hold red button to reset it reloads and starts by itself. Also there is no way to turn it off.
Everything was working fine in the morning before the charge and all other days.
Maybe someone has experienced same stuff. Watch is only 1 month old...
Mioleris said:
Hey all
Today in the morning watch showed 9% on battery and I placed it to charge and after an 1 hour I came back to check and it was showing Amazfit logo, the one when you boot the device but logo stays forever. If I hold red button to reset it reloads and starts by itself. Also there is no way to turn it off.
Everything was working fine in the morning before the charge and all other days.
Maybe someone has experienced same stuff. Watch is only 1 month old...
Click to expand...
Click to collapse
The same situation here. I have tried everything without success. I am thinking that next version of zeep maybe automatically fix the issue.
Mam to samo. W nocy obudził bootloop. Nic nie pomaga.
Same problem here pethatic amazfit support money wasted
Any help for gtr2 bootloop restarting problem any hope help please
How to go in Fastboot mode gtr2 any guy answer please
Hey, I have a GTR 2, and at first I thought that the bootloop issue is software based. That can be easily fixed if you put the watch on the charger as it can finish loading even with a corrupted watchface installed.
In my case however, the watch only worked for a short time after I've put it in the freezer. That is a hardware issue. All that can be done is to get it replaced by the store that sold it to you, or in case that option is not available to you, you need to actually heat the board over 300C so that, hopefully, the bad connection is fixed (mobile repair shops can actually help with that).
As a test: put device in freezer, connect, reset, whatever, then shutdown the watch.
Wait for the watch to reach room temperature (non working state). If it's a hardware bootloop, the watch will not react to any buttons, will not show he charging animation, nothing. Basically black screen.
I also tried removing the battery for 10 seconds, holding any combination of buttons, charging states, screen presses, so simply don't waste time with that.
Every electronic equipment has a failure rate of 0-5%, we just happened to buy those 0 to 5% watches.
From what I understand, it is a design error and some contacts on the circuit board may not make contact...
The Amazfit GTR2 just doesn't work on the touch screen. I only used it for a week .... I restarted in vain, nothing.
Can anyone help me?
Good morning everyone
I wanted to share an experience with you. And the solution in the Amazfit GTR2 that was stuck in the logo
after I read the method of placing it in the freezer for a few minutes and that it really works for a few minutes
thing that and verified!
I came to deduce that it would be ??!!
It could be a violation of 183
well I proceeded to do a reflux since it still turns on I proceeded to use
125 degree heat
60 air
in a uniform way after saying the heat
turned on without problems
I hope it helps you
Buenas.. A todos
les quería compartir una experiencia. Y la solucion en la Amazfit GTR2 que quedaba pegada en el logo
despues que lei el metodo de colocarlo en el freezer por algunos minutos y que en verdad funciona por algunos minutos
cosa que e comprobado!!!
llegue a deducir que seria ??!!
Podría tratarse de una infracción de 183
bueno procegui en hacerle un reflujo ya que el mismo ahun prende procedi a usar
125 grados de calor
60 de aire
de una forma uniforme luego de decir el calor
encendió sin problemas
Espero les ayude
Ronaldvd said:
Good morning everyone
I wanted to share an experience with you. And the solution in the Amazfit GTR2 that was stuck in the logo
after I read the method of placing it in the freezer for a few minutes and that it really works for a few minutes
thing that and verified!
I came to deduce that it would be ??!!
It could be a violation of 183
well I proceeded to do a reflux since it still turns on I proceeded to use
125 degree heat
60 air
in a uniform way after saying the heat
turned on without problems
I hope it helps you
Buenas.. A todos
les quería compartir una experiencia. Y la solucion en la Amazfit GTR2 que quedaba pegada en el logo
despues que lei el metodo de colocarlo en el freezer por algunos minutos y que en verdad funciona por algunos minutos
cosa que e comprobado!!!
llegue a deducir que seria ??!!
Podría tratarse de una infracción de 183
bueno procegui en hacerle un reflujo ya que el mismo ahun prende procedi a usar
125 grados de calor
60 de aire
de una forma uniforme luego de decir el calor
encendió sin problemas
Espero les ayude
Click to expand...
Click to collapse
Hola! tengo el mismo problema, por cuanto tiempo le aplicaste el calor? le colocaste Flux si es así en que parte? no soy muy experto en esto pero quiero intentarlo.
Quedo atento. Saludos!.
I have a galaxy a21s that still boots in recovery,
I have already tried to flash the official rom several times without success in the recovery menu I have as message supported API 3 reboot
reebot recovery cause is ( unkown) when I do a wipe cache partitions I have an error in the wipe cache cache wipe failed that bothers me a lot I tried also via the reebot to bootloader I did the commands that need but at the time of the command fastboot oem unlock it seeks it seeks but nothing I confess I'm short of ideas there
hola pudistes solucionarlo???? me paso lo mismo... flasheo el euipo y no carga el nuevo soft...
lo reinicio a fabrica y me pone eso que mostras....
Translated by GT:
Hi, were you able to fix it? The same thing happened to me... flashing the device and it doesn't load the new software...
I reset it to factory and it puts what you show me....
No still not always blocked to recovery and even when I put it in bootloader it recognizes the phone but it refuses to put the twrp
Profitez de
si tenes alguna novedad o llegas a solucionarlo, me informas como se hace?
llego a encontrar la solucion le aviso.. gracias
los bootloader bloquiados puede llegar a ser... impide el hard reset y la carga de nuevos soft..... pero no puedo entrar para desbloquiarlos
Translated by GT:
If you have any news or you manage to solve it, let me know how it is done?
I managed to find the solution I let you know .. thanks
the locked bootloader can become... it prevents the hard reset and the loading of new software... but I can't enter to unlock them
@tano8085 Greetings, and welcome to XDA. As a courtesy, I have translated your last 2 posts. Please be respectful and observant of XDA Rule #4 for all of your future posts:
Spoiler: XDA Rule #4
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Thank you for your cooperation, and enjoy your stay on XDA.
-Regards: Badger50 FSM
tano8085 said:
si tenes alguna novedad o llegas a solucionarlo, me informas como se hace?
llego a encontrar la solucion le aviso.. gracias
los bootloader bloquiados puede llegar a ser... impide el hard reset y la carga de nuevos soft..... pero no puedo entrar para desbloquiarlos
Translated by GT:
If you have any news or you manage to solve it, let me know how it is done?
I managed to find the solution I let you know .. thanks
the locked bootloader can become... it prevents the hard reset and the loading of new software... but I can't enter to unlock them
Click to expand...
Click to collapse
No encontré ninguna respuesta y me rendí por completo
Seriously? Translated by GT: I found no answer and I gave up completely
espero te sirva... yo no puedo porque siempre me reinicia en el hard reset....
mo es por favor
Translated by GT: I hope it helps you... I can't because it always restarts me in the hard reset....
mine is please
Did you try with factory csc file..? Make sure your phone original csc and flash it, if same lets me know your firmware name. I will upload modified boot
I've the Motorola Moto E20, 2GB RAM and 32GB internal storage, is there any safe way to root this phone.
I'm just wanna update some kind of feature. because this phone are go edition, this phone are not able to draw any application over the display. this na main reason.
if there anyone. please help to root this phone.
entry.trap said:
I've the Motorola Moto E20, 2GB RAM and 32GB internal storage, is there any safe way to root this phone.
I'm just wanna update some kind of feature. because this phone are go edition, this phone are not able to draw any application over the display. this na main reason.
if there anyone. please help to root this phone.
Click to expand...
Click to collapse
Hello and good evening, @entry.trap
Welcome to XDA. I hope you'll always get the support you require.
However, prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved your thread to Android Q&A.
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
Conseguiu?
entry.trap said:
Tengo el Motorola Moto E20, 2 GB de RAM y 32 GB de almacenamiento interno, ¿hay alguna forma segura de rootear este teléfono?
Solo quiero actualizar algún tipo de característica. Debido a que este teléfono es una edición Go, este teléfono no puede dibujar ninguna aplicación sobre la pantalla. esta es la razón principal.
si hay alguien. por favor ayuda a rootear este teléfono.
Click to expand...
Click to collapse
S quieres dibujar encima de otras aplicaciones puedes utilizar shizuko es una app para dar permisos como si fuera root
Same
We need an updated method
Should I stop looking to root moto E20 or buy another phone? Trying to install drivers also for the unisoc T606 chipset but get this in the windows device manager. All help appreciated.