Question Custom ROM for Moto G Power (2021) - Moto G Power (2021)

Hi guys,
I am forced to upgrade my moto G5 plus due to a network update
In my moto G5 plus I have installed dotOS with android 11 and I am really happy with it, and I would like "clone" it on a Moto G Power.
Here are some questions:
1) since Moto G Power (2021) is not listed on dotOS but a GSI ARM64 available, has anyone experienced with that? I am also open to other custom ROMS (also Lineage OS doesnt have this devicelisted)
2) I also noticed that TWRP is not available for Moto G Power (2021), is there a good alternative or I have to use adb fastboot?
Thanks!
Edit:
I just found the thread:
[RECOVERY][UNOFFICIAL] TWRP 3.6.0-11 [BORNEO] Android 11 Based (updated 12/11/2021)
I can try that for question 2

Efone said:
Hi guys,
I am forced to upgrade my moto G5 plus due to a network update
In my moto G5 plus I have installed dotOS with android 11 and I am really happy with it, and I would like "clone" it on a Moto G Power.
Here are some questions:
1) since Moto G Power (2021) is not listed on dotOS but a GSI ARM64 available, has anyone experienced with that? I am also open to other custom ROMS (also Lineage OS doesnt have this devicelisted)
Click to expand...
Click to collapse
Presently I don't believe it is possible to have a custom rom as we need the kernel be released for it to have a chance, or a compatible similar device and its kernel.

Hi Onoitsu and thank you for the reply,
so I guess I could go with the stock ROM. I noticed that I can use https://mirrors.lolinet.com/firmware/moto/borneo/ has an official and blankflash (not sure what the difference is). If I understand the process correctly I could:
1) unlock bootloader
2) flash twrp in recovery
3) flash blankflash.zip (or official?) through twrp
4) flash magisk through twrp
5) restore my old phone dotOS android 11 backup through twrp
and I should have all the apps and data as in the old device?

Efone said:
Hi Onoitsu and thank you for the reply,
so I guess I could go with the stock ROM. I noticed that I can use https://mirrors.lolinet.com/firmware/moto/borneo/ has an official and blankflash (not sure what the difference is). If I understand the process correctly I could:
Click to expand...
Click to collapse
The blankflash is only if you can no longer flash anything by usual methods
Blankflash and EDL Mode
Is my device in EDL Mode?
How to boot into EDL Mode

Thanks for the info!
Should the reasoning above work if I use official instead of blankflash?

Efone said:
3) flash blankflash.zip (or official?) through twrp
Click to expand...
Click to collapse
Neither the blank flash nor official firmware are twrp compatible.

Thanks sd_shadow for the info, it is really helping me out.
I saw your post for using LSMA, but I couldnt find a Linux version. Is there one? Or the only other option I have is going through the fastboot process?

Can anyone tell me if there is going to be custom roms made for Borneo?

Hatrackman said:
Can anyone tell me if there is going to be custom roms made for Borneo?
Click to expand...
Click to collapse
Still the reason I cite in post 2 above, indeterminate, sadly.

Onoitsu2 said:
Still the reason I cite in post 2 above, indeterminate, sadly.
Click to expand...
Click to collapse
Mostly concerned because google has said they're going to stop their 'less secure app' thing at the end of this month and it might mean textnow will stop working outright for people that don't use play services.
Hopefully anyone working on making a custom rom for Borneo will see this thread and maybe give an idea if its going to happen.

Does this help?

If I wanted to start from scratch what would I need to know to make my own custom rom? Don't need a phone, will only ever use wifi. Just need microg basically.

The following statement is on the dotOS FAQs:
Q: My device is not supported! What should I do?!​A: First reason can be that our development team doesn't have your device to support it or we no maintainer applied for this device. You can always use our GSI builds if your phone supports Treble Project.
Here we have this statement:
... Google requires every Certified Android device launching with Android 8.0 Oreo and above to support Treble.
Here borneo is listed as a supported device.
Does this mean dotOS GSI supports MotoGPower 2021 without the need of vendor blobs?

Onoitsu2 said:
Presently I don't believe it is possible to have a custom rom as we need the kernel be released for it to have a chance, or a compatible similar device and its kernel.
Click to expand...
Click to collapse
@sd_shadow
Two sites that potential rom developers may want to check out:
1) https://github.com/moto-common
check out: https://github.com/moto-common/andr...ernel/blob/12/dtb/bengal-moto-base-borneo.dtb
2) https://github.com/moto-sm6115
Scroll through the list of repositories, particularly in the moto-common site

@sdembiske that looks promising, I am willing to give it a shot and contribute to the community. Is there a good guide on how to build the kernel with vendor tree/blobs etc...?

Reference "Moto G Power 2021 XT2117-4 Firmware Extractions" - You will find the extracted kernel etc. in the boot.img extracted link that you can download - there are many other extractions that you hopefully can use to build a custom or AOSP rom.
Your best bet would be to add a pre-built kernel in the build - you can google that for how-to's.

Onoitsu2 said:
Presently I don't believe it is possible to have a custom rom as we need the kernel be released for it to have a chance, or a compatible similar device and its kernel.
Click to expand...
Click to collapse
The Xiaomi poco m3 has the same SoC and other innards as the Moto G Power 2021 and it also has unofficial Lineage OS 19 support. I am considering hitting them up and using their code as part of the build. I'm also requesting Motorola Mobility LLC to release the kernel source for Android 11. I already have a device tree for Borneo on my github. Me and Fazwalrus have a telegram chat set up for the ROM development here

Related

[ROM][UNOFFICIAL][owens] LineageOS 14.1 for Moto E4 Plus (Qualcomm)

Heavily based on the WIP LineageOS port for the Moto E4 (Qualcomm) [perry] -- for more information about that, click here.
Known working:
Booting
Connecting to Sprint's 1xRTT network (2G data, voice, SMS)
Fingerprint sensor
WiFi
Broken:
Sound
Sprint 3G data and LTE (need to add in Sprint network blobs)
XDA:DevDB Information
LineageOS 14.1 for Moto E4 Plus (Qualcomm), ROM for the Moto E4 Plus
Contributors
ReimuHakurei, squid2, Alberto97
Source Code: https://github.com/ReimuHakurei/android_device_motorola_owens
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
Based On: LineageOS
Version Information
Status: Alpha
Created 2017-10-31
Last Updated 2017-10-31
Uploaded another build that seems to get LTE on Sprint. All of the menus are still broken so you presumably need to be activated on stock before flashing.
Is there any way to make the fingerprint function to wake up / close screen to work with out requiring a pin/pattern/code to be active? That'd be an awesome feature
Installed on my XT1775 briefly and except for the sound this looks pretty good. I'm on AT&T and LTE worked fine, etc. I just can't live without sound as I need my phone for work teleconferences. I will *definitely* use this as soon as I can daily drive it!
I have tried (and failed) to get CDMA data properly working. Once someone gets CDMA/Sprint support working properly on one of the other devices in this family, it should be simple enough to port whatever the fix may be, but until that happens, this will likely remain as-is.
Since gsm seems to get LTE will this ROM still be worked on to get sound working? Even though I know CDMA users are out of luck for now. I have the standard e4 and want to buy a plus but I definitely need aosp ROMs.
Thanks for your work porting this. Actually shocked to not see more development considering how huge the battery is on the device.
fix-this! said:
Since gsm seems to get LTE will this ROM still be worked on to get sound working? Even though I know CDMA users are out of luck for now. I have the standard e4 and want to buy a plus but I definitely need aosp ROMs.
Thanks for your work porting this. Actually shocked to not see more development considering how huge the battery is on the device.
Click to expand...
Click to collapse
I need to repair my shattered Moto X Pure so I have a working phone to use while developing before I can do much more work here (ie: on fixing audio). This was mainly a proof-of-concept to make sure I was, in fact, able to get the thing to boot, before I spent too much work fixing other things.
For CDMA, I think the root of it is the new architecture Sprint is using in preparation for CDMA+VoLTE; I tried porting over files from the Moto X Pure's LineageOS port, but it uses older tech for CDMA internally. The Moto G5S has the same ISIMv2 SIM card on Sprint so should be similar software-side, and the Moto G5S will almost certainly have a pretty active community judging from past Moto G series phones. Moto X4 should be similar as well.
I am likely to be pretty busy for the next month or so, though, so probably won't have time to do any work on this until then.
so does someone plan to pick back up development on this? really surprised there isnt more devs on the plus model. much better build, camera, cpu and that big ?.
What exactly did you have to do to get this to work. I'm considering trying to port a few roms from perry over to owens, but if it's too hard, or just practically impossible I'm not going to bother.
Which version seems to have LTE working? I currently have no LTE just call(no sound) and txt lol
So I am attempting to build my first rom for the Moto e4 plus Qualcomm. I'm just following the build instructions on lineageos's website. I'm stuck now because there is not a device tree in the lineageos git. I see that the OP has a device tree on git and I also see that there is now a Moto kernel on git. I am unsure what the next step is? I'm unsure how to make the device tree part of my local git and also how to mix the new kernel posted from Moto. Any help and I will post what I create. Thanks.
@ReimuHakurei would you please attempt to fix sound for this custom ROM now that the kernel sources have been released. I've been looking forward to replacing the stock room on my phone for a while
FlagersXDA said:
@ReimuHakurei would you please attempt to fix sound for this custom ROM now that the kernel sources have been released. I've been looking forward to replacing the stock room on my phone for a while
Click to expand...
Click to collapse
Yes please! I really want to use this rom but I use my phone for listening to music all the time. Will some please fix the sound?
Bump, can someone please fix this?
Thank you for releasing this!
+1 for no sound or mic on xt1775
I tried Bluetooth and wired audio devices and sound/mic is not functioning for them either.
I am able to connect to the Verizon network with a their Sim through net 10, but only 3g (EvDo-rev.A, by choosing global auto) and not LTE after trying various modes in the 4636 menu. With the same Verizon Sim through net 10 my Nexus 5x h791 does connect to LTE .
Besides the issues above, this appears to be working well!
Also, if anyone can share complete stock partition images files (boot, recovery, and system partitions) for the xt1775, this would be appreciated, but I'm ok using my phone as is for now. I wish I had thought to make a complete backup by booting twrp through fastboot (fastboot boot recoverimagefilenamehere.img) and then making a backup first instead of flashing twrp before doing that. After I flashed twrp, instead of the Motorola bootloader unlocked screen, all I see is the white text "N/A" on a black background in the top left corner during bootup. Also, after I installed twrp I could no longer boot to the os until I installed this unofficial lineageos rom. I'm not sure if that is expected. Since I didn't make a backup of the system partition and boot before flashing twrp, I'm unable to restore the stock os. Lesson learned... immediately after making the mistake. I did make a backup of the boot and system partitions after flashing twrp before installing this unofficial lineageos rom(when I was already having the boot up issue), but when I restore them I have the same issue where the phone will not boot into the os. This is what I expected, at that point anyways.
Thanks again!
For Mediatek Variant
Sir,Any custom rom for Mediatek variant of this handset
fllannell said:
Also, if anyone can share complete stock partition images files (boot, recovery, and system partitions) for the xt1775, this would be appreciated, but I'm ok using my phone as is for now. I wish I had thought to make a complete backup by booting twrp through fastboot (fastboot boot recoverimagefilenamehere.img) and then making a backup first instead of flashing twrp before doing that.
Click to expand...
Click to collapse
I'm not sure if its the exact same variant, but @_maerk released stock images for the retail (snapdragon) e4 plus. Even if yours is carrier specific, as long as your bootloader is unlocked and you have the Qualcomm version you should still be good. I remember on my old Sprint Moto E from 2015 I could still flash the OS/Recovery/Boot images from the retail version, just not the modems or bootloader.
Update: I was able to restore to stock using the following link.
SCROLL TO POST # 10 for directions for Moto E4 Qualcomm (Owens) retail unlocked:
https://forum.xda-developers.com/moto-e4-plus/how-to/moto-e4-qualcomm-owens-completely-to-t3743441
Then I flashed Reiku's version of TWRP for the phone:
https://forum.xda-developers.com/moto-e4-plus/development/twrp-twrp-moto-e4-plus-qualcomm-t3697154
Then I installed this unofficial Lineage version:
[ROM][UNOFFICIAL][owens] LineageOS 14.1 for Moto E4 Plus (Qualcomm)
https://forum.xda-developers.com/mo...lineageos-14-1-moto-e4-plus-qualcomm-t3734197
Then I installed OpenGAPPs and AddonSu. The only hiccup I had through the process was that I got an ERROR Code: 64 when trying to install the ARM 64 version of openGapps in TWRP, so I used a non 64 version without issue.
Thanks to everyone for all of your efforts on these projects.

Question Where to start building a working twrp and/or roms for moto g power 2021 (borneo)?

Hello all, where would I start in making a working twrp for this phone?
Does anyone know if Motorola has released the device tree/source code for this phone so we can make the roms? LineageOS would be ideal.
Well, I have the same phone. Couldn't find ROMs for it.
thebestofall007 said:
Hello all, where would I start in making a working twrp for this phone?
Click to expand...
Click to collapse
look in this forum here, there are a couple floating around for it, I've made one, that I was able to fully flash to mine and has touch (Android 10. there's another that is 11 on here too by another poster), but as there are multiple display options out there it seems for how they were made, that is the sticking point, as not all will behave properly when booted into a recovery like mode it seems. I have tried installing it over bootloader and it will have touch then, but when flashed to recovery the touch never activates properly. So it all likely comes to that, as we'll need combine them in, properly applying proper checks for each display type and having it use the proper driver files, since can't load them all at once or it breaks things.
Working shrp for Borneo
thebestofall007 said:
Hello all, where would I start in making a working twrp for this phone?
Does anyone know if Motorola has released the device tree/source code for this phone so we can make the roms? LineageOS would be ideal.
Click to expand...
Click to collapse
First place to start: twrpdtgen
Read the "readme"
Also check out:
[DEV]How to compile TWRP touch recovery​
Device tree made from A10. Should still be relevant for A11.
Kernel for A10. Unfortunately I don't think Moto released the one for A11 yet. You can ask on their GitHub and devs might consider your request.
TWRP for A11. Touch is working.
Edit : here's a link for the device tree (in text) from A11
maybe this will work
thebestofall007 said:
Hello all, where would I start in making a working twrp for this phone?
Does anyone know if Motorola has released the device tree/source code for this phone so we can make the roms? LineageOS would be ideal.
Click to expand...
Click to collapse
maybe this will help probably https://github.com/MotorolaMobilityLLC/kernel-msm
UPDATE: I have a telegram account where we are discussing how to make a custom lineage OS. I'm at the gathering stage and in the process of porting a device tree. For starters I want to start with lineage OS 18 because its the same android version the stock OS is, to be on the safe side, and that I've never done ROMS before.
Moto G Power 2021
I now have a device tree with the help of AOSPdtgen from the stock ROM from mirrors.lolinet: https://github.com/thebestofall007/android_device_motorola_borneo
I have started the build and got the first error:
https://imgur.com/a/XZoqy8B
I've looked this error up and they say it's because of the ram, but the error recurs at the same point. I have 16gb of swap, too.
thebestofall007 said:
I have started the build and got the first error:
https://imgur.com/a/XZoqy8B
I've looked this error up and they say it's because of the ram, but the error recurs at the same point. I have 16gb of swap, too.
Click to expand...
Click to collapse
you need alot of ram to build a rom for android 36GB of RAM or more will be beater to it wont crash
KILLFIREY1389 said:
you need alot of ram to build a rom for android 36GB of RAM or more will be beater to it wont crash
Click to expand...
Click to collapse
The error turned out to be entries in the proprietary-files.text file that needed to be deleted.
@thebestofall007 If you'll suceed. please take in consideration to build \e\ (aka deGoogled Lineage) too.
Here's a couple of interesting links that may help:
https://doc.e.foundation/support-topics/build-e
https://community.e.foundation/t/howto-building-e-roms-a-beginners-guide/26371
Last but not least, we've also suggested them (check here) to setup a "build (V)Machine" by modding this colab notebook to made it device agnostic:
https://github.com/viam1-dev/colab_lineage_build
Hope can "inspire" you.
Thanks in advance.
Does anyone have a complete list of sources so far? I have some experience in the past building ROMs for Android 5 and I wouldn't mind trying. I have a lot of computer resources to dedicate to building as well.
Device tree: https://github.com/thebestofall007/android_device_motorola_borneo-old
Does anyone know if there is a kernel source? I looked on the Moto github and couldn't find one. Is everyone using prebuilt for the time being? Also, do we need a vendor tree?
Thanks

AOSP 12.0 GSI - MOTO G6 ALI!

AOSP 12.0 GSI - G6 ALI​Hello friends, how are you? I was pretty tired of the traditional roms we have for the Moto G6 there, (I got sick), these roms are excellent, but with time it ended up being more the same, that's when phhusson released an Android 12 GSI, I went to test it and found it amazing the operation on the system, unfortunately there is no way to use the SIM, but some improvements are even nice, I'm starting in this area of customization of the latest ROMs (current android)
You need a recovery that accepts ARM64 ROMs, and the GSI itself
In the link you select system-squeak-arm64-ab-vanilla.img.xz and download, then unzip and install on your system and test
GSI:
Releases · phhusson/treble_experimentations
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
Depending on when you are watching this post the performance is already better, however I made this post to motivate the community (us) to try to port ROMs and GSIs for the Moto G6 ALI.
For those who are having doubts a while ago I made a video installing the TWRP with the GSI of Android 11 on the Moto G6 ALI, I recommend you check it out if you have any questions!
(The video is in Brazilian Portuguese my native language)
How were you able to get an a/b partition GSI to boot properly on an A-only partition device like the Moto G6?. I've used A-only GSIs successfully on mine in the past but my understanding is A-only has been discontinued with release of a12.
I don't know man, but I just installed it, in the application that sees which system it is if it's AB or A only says it's AB, if I'm not mistaken I've already tested A only roms for it but it didn't work for some reason, I don't know if it's the current Vendor of the custom Roms I'm using or something else, I think it's the vendor since it's not an ARM32 but an ARM64, it can also be for recovery. In short, I don't know.
but it works
Don't know why an a/b gsi works on an a-only device but it does. Give this a12 gsi a try OctaviOS-v3.2-arm64_bvN-29122021-Unofficial.img.xz. It booted and I got an LTE signal no problem.
doesn't work for me
tried both 64 and 32, i'm using twrp 3.6.0_9-0 though, not sure if that is the problem, rolling back to 11 for now.
You might to flash permissive v4 before first boot after flashing the gsi image. https://androidfilehost.com/?w=search&s=Permissiver
Skippy12359 said:
You might to flash permissive v4 before first boot after flashing the gsi image. https://androidfilehost.com/?w=search&s=Permissiver
Click to expand...
Click to collapse
Nope, still gets a boot loop into the bootloader, i'll give it another try though
adhamnasr said:
Nope, still gets a boot loop into the bootloader, i'll give it another try though
Click to expand...
Click to collapse
Try man, because it's worth testing and seeing the Moto G6 ALI running Android 12, pretty cool
HeroRicky_Games09 said:
Try man, because it's worth testing and seeing the Moto G6 ALI running Android 12, pretty cool
Click to expand...
Click to collapse
i am, but maybe i'm doing something wrong
do you guys push the img and install using twrp or sideload?
edit: i reflashed it to stock, and gonna repeat the process
I didn't use stock boot or vendor when Octavia gsi booted for me. I was on the latest Ali Crdroid11 Dec patch, backed it up in latest twrp, did a normal wipe and flashed the vanilla Octavia arm64 a/b system gsi link above. Don't recall if it booted right away or if I went back to twrp and flashed permissiver v4. Either way it booted fine, got carrier signal right away (t- mobile) , sound also worked fine. Didn't flash gapps or anything else. Just was curious if an a/b gsi would actually boot on a G6 and both Aosp12 and Octavia both did for me. Try this permissive zip if the other doesn't work https://androidfilehost.com/?fid=6006931924117886495
Did a little research on telegram and found out a12 a/b gsi's will also work on an a-only device as long as the device supports SAR (system as root). Treble check app shows the G6 supports SAR and is arm64 so that's likely why they boot OK for some of us. That said the two I've tried Aosp12 and Octavia12 were laggy and would hang occasionally.
For those who are having doubts a while ago I made a video installing the TWRP with the GSI of Android 11 on the Moto G6 ALI, I recommend you check it out if you have any questions!
(The video is in Brazilian Portuguese my native language)
I can't believe it, but I made it work...
adhamnasr said:
I can't believe it, but I made it work...
Click to expand...
Click to collapse
The cool thing about this GSI is that it runs without lags, the only problem is the mobile data. if it worked it would be perfect
HeroRicky_Games09 said:
AOSP 12.0 GSI - G6 ALI​Hello friends, how are you? I was pretty tired of the traditional roms we have for the Moto G6 there, (I got sick), these roms are excellent, but with time it ended up being more the same, that's when phhusson released an Android 12 GSI, I went to test it and found it amazing the operation on the system, unfortunately there is no way to use the SIM, but some improvements are even nice, I'm starting in this area of customization of the latest ROMs (current android)
You need a recovery that accepts ARM64 ROMs, and the GSI itself
In the link you select system-squeak-arm64-ab-vanilla.img.xz and download, then unzip and install on your system and test
GSI:
Releases · phhusson/treble_experimentations
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
Depending on when you are watching this post the performance is already better, however I made this post to motivate the community (us) to try to port ROMs and GSIs for the Moto G6 ALI.
For those who are having doubts a while ago I made a video installing the TWRP with the GSI of Android 11 on the Moto G6 ALI, I recommend you check it out if you have any questions!
(The video is in Brazilian Portuguese my native language)
Click to expand...
Click to collapse
I made a video installing this GSI on it, go there and check it out! It is in Portuguese Brazil.
Will it work on moto g6 play Jeter 3gb ram 64 bit cpu snapdragon 430 currently on Android 11 pixel experience
Nikhil15 said:
Will it work on moto g6 play Jeter 3gb ram 64 bit cpu snapdragon 430 currently on Android 11 pixel experience
Click to expand...
Click to collapse
possibly yes!
Can you tell the steps of installation because I don't understand brazilian
And please tell about bugs of anything

How to install custom on Android if the hardware is not present on custom rom device list?

Hey, I want to install Pixel Experience custom rom on my Android Phone but unfortunately my phone vendor is not present on devices tab. In this case what should I do? How can I install custom rom on my Android phone?
My Phone is Techno Spark 6 GO.
you could try GSI but that device shipped Android (Go edition) usually for low ram. bootloader is unlockable?
Wnat is GSI? Generic System Image? Even if I am able to unlocked bootloader on my device then what then? Since I am not able to find custom OS for it.
Haziq12345 said:
Wnat ks GSI? Generic System Image? Even if I am able to unlocked bootloader on my device then what then? Since I am not able to find custom OS for it.
Click to expand...
Click to collapse
same problem here i want to install custom rom for my devce but theres is no availablecustom rom for it
Generic System Image is generic. you won't find GSI especially for this device. it's trial and error
[GSI][13] LineageOS 20 "Light"
LineageOS is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device. LineageOS is based on the Android Open Source Project with extra...
forum.xda-developers.com
Thanks for the explanation, but by testing what if tested wrong GSI and phone become brick. Then it would be useless.
unlock bootloader first. if bootloader is unlocked, we will talk about *what if* questions
It's now easy to bypass MediaTek's SP Flash Tool authentication
A group of developers has created a Python utility to bypass the authentication routine of MediaTek SP Flash Tool. Check it out now!
www.xda-developers.com
aIecxs said:
unlock bootloader first. if bootloader is unlocked, we will talk about *what if* questions
It's now easy to bypass MediaTek's SP Flash Tool authentication
A group of developers has created a Python utility to bypass the authentication routine of MediaTek SP Flash Tool. Check it out now!
www.xda-developers.com
Click to expand...
Click to collapse
Does this works in oppo too yes my bootloader is unlocked my phone is oppo a71 cph1717
Unofficial LineageOS 17 GSI released for Project Treble compatible devices
You can now get LineageOS 17, based on Android 10, on any Project Treble compatible device thanks to this unofficial LineageOS 17 GSI release.
www.xda-developers.com
How to flash a Generic System Image (GSI) on Project Treble supported devices
So your device supports Project Treble, what does that mean for you? It means you can flash a Generic System Image such as LineageOS or Resurrection Remix! Enjoy AOSP-based custom ROMs! Here's a guide on how to install these ROMs.
www.xda-developers.com
aIecxs said:
Unofficial LineageOS 17 GSI released for Project Treble compatible devices
You can now get LineageOS 17, based on Android 10, on any Project Treble compatible device thanks to this unofficial LineageOS 17 GSI release.
www.xda-developers.com
How to flash a Generic System Image (GSI) on Project Treble supported devices
So your device supports Project Treble, what does that mean for you? It means you can flash a Generic System Image such as LineageOS or Resurrection Remix! Enjoy AOSP-based custom ROMs! Here's a guide on how to install these ROMs.
www.xda-developers.com
Click to expand...
Click to collapse
So its really possible to install gsi on my oppo a71? Right sir?
you tell us
aIecxs said:
you tell us
Click to expand...
Click to collapse
Hmmm its said there that i need to be android 8 or higher to flash the gsi but my phone is android 7.1.1
probably not... double check with that app
Treble Check - Apps on Google Play
Check your device for Project Treble support and more
play.google.com
found this guide but seems dangerous, most likely you will end up bricked
[GUIDE] [Q&A] [TREBLE] From Stock to Treble - everything you need to know!
Here I will share all the info you need to know about using Treble on the Mi A1. Everyone is more than welcome to ask questions and clarification here, I am happy to answer and will update this thread over time. Thanks! Contents 0. Key Terms...
forum.xda-developers.com
aIecxs said:
probably not... double check with that app
Treble Check - Apps on Google Play
Check your device for Project Treble support and more
play.google.com
Click to expand...
Click to collapse
My phone doesnt supported but could it possibly work although its not supported?
Anonymous V said:
My phone doesnt supported but could it possibly work although its not supported?
Click to expand...
Click to collapse
No. search for custom ROM for your device
aIecxs said:
No. search for custom ROM for your device
Click to expand...
Click to collapse
Nah i already did but no i cant find anything im like searching for 2 months but nothing i cant find something fit on my device so i hope gsi would work for me it should be easy for me my phone is running in oreo or pie but nah i cant find custom rom for my device also i know this link custom ROM its says he that he have the same phone as mine so he prted ressurection os pie for his phone and it work im a bit worried about it pls sir if you can tell me if this rom is safe just confirm it to be safe ill try this out
Anonymous V said:
pls sir if you can tell me if this rom is safe ill try this out
Click to expand...
Click to collapse
that's not how xda works.
aIecxs said:
that's not how xda works.
Click to expand...
Click to collapse
Yeah i know i just asked if this is safe like there no virus or trojan somthing because it happens to before my phone broke because of virud from the rom thats why and if ever i bricked my device i know how to fix it and backup is already in standby

Question can anyone know how to get pixel experience android 11 rom nowadays?

Hello.I installed pixel experience custom rom [android 11 verson] in my redmi note 10 about 2 years ago.After that i again installed stock miui rom,which is currently using.I decided to install pixel experience again.But i can't find pixel experience android 11 verson.all are android 12 and 13.I need android 11,not 12 or 13.can anyone please help me find android 11 verson?
You can still find the GSI image
Release Pixel Experience 11.0 v313 · ponces/treble_build_pe
Sync with Phh's AOSP v313 Sync with October sources of PE
github.com
spider1163 said:
You can still find the GSI image
Release Pixel Experience 11.0 v313 · ponces/treble_build_pe
Sync with Phh's AOSP v313 Sync with October sources of PE
github.com
Click to expand...
Click to collapse
can't understand clearly what are you saying. I have no idea about GSI image.Is it possible to get android 11 rom from there?tell me please?
I didn't find the classic ROM for this version
GSI is generic system image, you need to follow this procedure
[GSI][PHH][13] Guide & Support [Mojito][Sunny]
Why should I use a GSI ? Mojito already have custom ROMs ¯\_(ツ)_/¯ Yes. But this thread exists due to the following reasons: You don't wanna fear about devs stop shipping updates. You don't wanna re-flash your custom recovery / kernel after each...
forum.xda-developers.com
spider1163 said:
I didn't find the classic ROM for this version
GSI is generic system image, you need to follow this procedure
[GSI][PHH][13] Guide & Support [Mojito][Sunny]
Why should I use a GSI ? Mojito already have custom ROMs ¯\_(ツ)_/¯ Yes. But this thread exists due to the following reasons: You don't wanna fear about devs stop shipping updates. You don't wanna re-flash your custom recovery / kernel after each...
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks for helping.I studied about gsi and think that,it is not a perfect option for daily use.I need android 11 custom rom with stability.Please don't forget to share with me,if you ever find any way or link to get pixel experience older android verson rom. Again Thanks for reply.
AhmedRadowan25 said:
Thanks for helping.I studied about gsi and think that,it is not a perfect option for daily use.I need android 11 custom rom with stability.Please don't forget to share with me,if you ever find any way or link to get pixel experience older android verson rom. Again Thanks for reply.
Click to expand...
Click to collapse
I think i can find it but i will need to upload it. Wait.
AhmedRadowan25 said:
Thanks for helping.I studied about gsi and think that,it is not a perfect option for daily use.I need android 11 custom rom with stability.Please don't forget to share with me,if you ever find any way or link to get pixel experience older android verson rom. Again Thanks for reply.
Click to expand...
Click to collapse
https://sourceforge.net/projects/pixelexperiencerom/files/mojito/ here it is my friend. Plus and normal editions, vanilla and gapps variants. I need a favor if you can test, i dont have pc right now so i dont wanna risk it. See if you can flash this 11 version with the recovery from 13 version. Im on 13 but i want to test 11 and cannot sideload recovery or anything else because i dont have pc or otg either. Only have sdcard.
gabsvm1 said:
https://sourceforge.net/projects/pixelexperiencerom/files/mojito/ here it is my friend. Plus and normal editions, vanilla and gapps variants. I need a favor if you can test, i dont have pc right now so i dont wanna risk it. See if you can flash this 11 version with the recovery from 13 version. Im on 13 but i want to test 11 and cannot sideload recovery or anything else because i dont have pc or otg either. Only have sdcard.
Click to expand...
Click to collapse
Thank you very much brother.Take love.I will surely inform you if i can do it.
AhmedRadowan25 said:
Thank you very much brother.Take love.I will surely inform you if i can do it.
Click to expand...
Click to collapse
Your welcome! Let me know if it can be done and your experience in the rom, ill surely will install it too if it can be done

Categories

Resources