Hello! I have honor 7 (PLK-L01). I tried to install an older version of the firmware, but without success. It got to the point where everything was installed and the phone had to be restarted, but it didn't turn on anymore. Now I try to turn it on, hold the power button, the phone vibrates once and that's it. neither turns on nor anything! I will be happy if you help me!
Related
Hi there! I'm a stupid-stupid person. I was trying to get Lollipop faster, so I tried to flash lollipop on my phone.
I managed to root it, but haven't done any backup, except for media and contacts.
I'll try to explain what I've done.
So I rooted the phone, entered the download mode and then I tried to flash it using LG Flash Tool 2014.
When in download mode, it was stuck at 0%, so I didn't wait to go ahead, I tried to flash it.
Now, the flash failed several times. The phone was alright then.
Further, I tried again and at some point something happened, it got to two percent, it wrote COM4 and then it failed. It might have been my antivirus that stopped the process, I'm not sure.
Well, now I have a useless phone. It keeps showing the LG logo.
The hard reset doesn't work, it's not recognized in Device manager, and it doesn't work download mode.
When I try to power it off it does so only after a long press. At first, when the screen goes black, if I release the power switch, then it will reboot again. If I press it long enough, the phone will power off.
I'm desperate, of course.
The phone was running Kitkat.
Hey guys, need help.
Phone is not mine, never had a Huawei so dont know the huawei technologies,acronyms.
Tried to update a Honor 3C to latest version from the Huawei official site.
It was a 2 part installation. Had to paste in the sd card a folder named dnload. Then through the phone update hit the local update it found the file and updated for 6-7 mins. Turned on by itself, i was in the system, new update was working fine.
Then i had to install the second dnload folder. Did the same procedure with the first.
Phone was installing the update then turned off. I was waiting for it to turn on by itself but it didn't.
I tried to turn it on from the power button. It just vibrated and kept vibrating every 20 seconds.
It's like every time it vibrates it's trying to turn on.
I would revert it back or reset it but it does nothing but vibrate.
Took the battery off and back on, nothing.
Tried recovery mode, nothing.
Tried using sp flash tool, the program is not recognizing the phone i think, nothing.
I need urgent help because it's not my phone and i'm leaving the country tomorrow evening.
Thank you in advance.
Hello,
This is my first post so i hope that this is the right place.
I have a serious problem. My K910 is endlessly rebooting.
It all started after i updated android from 4.2.2 to 4.4.2 When device rebooted after installation it never came further than lenovo logo.
When phone turns on, it vibrates, then lenovo logo comes out for 2-3 seconds then it dissapears and the loop starts again.
it shuts down only when i push power button and volume- button multiple times.
I have tried to enter recovery/safe mode, but with no results phone keeps rebooting.
I reinstalled battery but still as i turn the phone on, same problem occurs.
As soon as i connect my phone to pc phone turns on and endless loop starts again.
Questions:
How can i change to stock ROM or connect to PC in this situation since it keeps on rebooting my pc doesnt see added device?
What can i do to fix this situation?
Please Help.
I promise $feedback if this thing can be fixed
trusis16 said:
Hello,
This is my first post so i hope that this is the right place.
I have a serious problem. My K910 is endlessly rebooting.
It all started after i updated android from 4.2.2 to 4.4.2 When device rebooted after installation it never came further than lenovo logo.
When phone turns on, it vibrates, then lenovo logo comes out for 2-3 seconds then it dissapears and the loop starts again.
it shuts down only when i push power button and volume- button multiple times.
I have tried to enter recovery/safe mode, but with no results phone keeps rebooting.
I reinstalled battery but still as i turn the phone on, same problem occurs.
As soon as i connect my phone to pc phone turns on and endless loop starts again.
Questions:
How can i change to stock ROM or connect to PC in this situation since it keeps on rebooting my pc doesnt see added device?
What can i do to fix this situation?
Please Help.
I promise $feedback if this thing can be fixed
Click to expand...
Click to collapse
That means your phone is in bootloop. Try opening recovery and wipe cache/data . If you got a custom recovery, then its much better.
Hello,
Also i experienced similar problem with a defective battery,
after i removed it too much,
fixed by replacing it,
hope it helps.
Hi guys, I have a samsung galaxy j600fn/ds, tryed to flash twrp, something went wrong and now I'm locked on the ''Samsung'' logo screen
I guess it is brick, though I'm totally stuck at the screen, the phone won't even turn off, so I don't know how to acces download mode to install stock firmware.. anyone can be of help?
EDIT: solved.. of course the solution was just to wait for the battery to be completley depleted, I just got scared there not beeing able to do anything
Wait-
So you just let your phone in bootloop all night (?), then you charge it without turning it on,
waited till 30%, and then you put it in download mode and installed the firmwere?
Does it really work? 'cause I tried to do that before, and the bootloop stopped. I tought I ended up into an hard brick.
I pressed powen and tried to put the phone into download mode, but nothing.
I put the usb on my pc, and odin was actually reading it, so I tried again and again to get into the download mode.
Afret 30 minutes, i pressed power again, (and finally) the boorloop restarted.
Well um.. the phone now is probably at 60%.. I hope it wont stop again, and I hope this method will work.
hey guys i have a P9 EVA-L19C900B116 running emui 4,I wanted to install nougat but direct nougat wasn't possible so i decided to install the rollback version EVA-L19C900B300. I was using the SD card method and tried the vol button and power key method but since that didn't work,i went into the the dialer method and clicked on SD card update it started installing but when it finished it was rebooting and got stuck on huawei logo and i tried turning it off,and it turned off but it turned back on immediately, i tried to turn it off again but it did the same thing so i left it there for the battery to drain.when the battery drained i plugged the charger but it turned on,stayed on huawei logo,then turned off,then turned on and the cycle continues,i tried to install stock ROM but it cant boot into download or recovery mode ,however i can get into fastboot mode and also my phones bootloader is not unlocked and also not under warranty any help from you guys will be appreciated