Hello,
My phone is dead ! after I flashed a wrong ROM. The problem is that now the following error appears when I try to flash another ROM:
BROM ERROR : S_FT-ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM Failed!
[HINT]:
Please check your load matches to your target which is to be downloaded.
i tried a lot of roms but keep saying Enable DRAM FAILED.
if anyone can help with the proper scatter files.
Thanks for your concern.
Hello everyone.
I am newbie. I just buy an Huawei Honor Y6 from my friend.
Model Number: Huawei SCC-U21
Build Number: SCC-U21C900B130
CPU / RAM: Quad Core 1.1 Ghz 2.0 GB
Lollipop 5.11 EMUI 3.1
Kernel Version: 3.10 49-g2d5b1a0 [email protected] #1 Mon Sep 7 16:05:29 2015
Custom Version: CUSTC636D001
I try to update all software in Google Play but failed and can't install any software to (error -501). So i come here and try to fix with some notes but also failed. I try to attach t with many root software because I think it was rooted. So lastly I try Kingoroot and it shows it was rooted. But there was no Kingo Root or Superuser software installed into my handphone. It also can't connected to HiSuite in my laptop. It will stuck at System Recovery (devices unsopported). now my hp just like a new hp without any access to install / update software, no Google Account signed. Just for Hotspot that I use to post in this forum. :|
this show in adb
C:\adb>fastboot oem device-info
...
(bootloader) Device tampered: false
(bootloader) Device unlocked: false
(bootloader) Charger screen enabled: true
(bootloader) Display panel:
OKAY [ 0.011s]
finished. total time: 0.013s
I need help to fix this. What I have to do? Please. Help me. Teach me step by step.
I'm trying to downgrade my VS985 using LG FlashTool 1.8.1.1023 so I can root, but when I start flashing it says "Download FAIL!! (0 sec)" and the box under it says this:
PID: NULL
IMEI: NULL
Model:
DLL: VS985
BIN: VS98510B_03.TOT
SWV:
SWOV:
Model Information Check FAIL!
00000000
I've tried many times, with the same error. What should I do?
EDIT: I think I'm probably using the wrong TOT and DLL files.
Hi there!
It's been a couple of hours I pass trying to install a new Rom on my Oneplus X.
First thing I do was to return it Stock and install OOS at last update to have the last firmware.
I've unlock the bootloader, do the OEM unlock thing, I flash the recovery to TWRP 3.2.1.0 (it was a pain in the ass to do.... don't know exactly why)
As I had difficulties installing the TWRP, I install the OPXBLUpdateOOS3.1.zip which help me installing the recovery
I ran this command to be sure it is unlock
PS C:\adb> fastboot oem device-info
...
(bootloader) Device tampered: true
(bootloader) Device unlocked: true
(bootloader) Charger screen enabled: false
(bootloader) Display panel:
(bootloader) console_enabled: 0
(bootloader) exec_console_unconsole: 0
OKAY [ 0.010s]
finished. total time: 0.011s
And than, I try to install roms with TWRP... I select my Rom (I want to install Oreo from AOSPA, but I also try Lineage 14 and Cyanogen 13 which was the one I had before)
I always got this error :
Checking for Digest files
Skipping Digest check: no digest file found
And than, the recovery reboot...
What have I done wrong? What can I do now to install at least android N ?
What twrp are you using? Flash the latest official or the one by CheckYourScreen. It's under original android development forum. It looks more like an issue with twrp than from the zip files.
i am having the same problem with latest twrp
Try using the 3.2.3-0 TWRP recovery bcoz everything you mentioned which you did seems to be correct. So try the TWRP 3.2.3-0 and report back.
I have the same issue with the latest twrp: 3.2.3-0 on samsung galaxy a5 2016. Can't install an official ROM from sammobile.
I have the same message on Note 4 but it doesn't affect installation. I just ignore it.
I have the same fcking issue with missing digest fcking ****. I can't flash the Magisk more SuperSU. **** off!
I had problem in flashing ROM file in Samsung galaxy grand 2 .the error says "No digest file found "and "zip is corrupt" .pls help me to resolve the issue
I am facing the same problem. No digest file found!
C:\Users\Nabil\Downloads\adb>fastboot oem device-info
(bootloader) Verity mode: enforcing
(bootloader) Device unlocked: true
(bootloader) Device critical unlocked: false
(bootloader) Charger screen enabled: true
(bootloader) enable_dm_verity: true
(bootloader) have_console: false
(bootloader) selinux_type: SELINUX_TYPE_INVALID
(bootloader) boot_mode: NORMAL_MODE
(bootloader) kmemleak_detect: false
(bootloader) force_training: 0
(bootloader) mount_tempfs: 0
OKAY [ 0.006s]
Finished. Total time: 0.007s
omkolte17 said:
Try using the 3.2.3-0 TWRP recovery bcoz everything you mentioned which you did seems to be correct. So try the TWRP 3.2.3-0 and report back.
Click to expand...
Click to collapse
I just had this with my S5 Plus on 323 , I downgraded twrp and voila ..fixed roms that ended with (no rom installed are you sure you want to reboot?) are working perfectly !!!
Hi everyone!
Just wanted to share some steps in case you brick your Realme.
DISCLAIMER: I AM NOT RESPONSIBLE FOR ANY DAMAGES
Some prerequisites you will need:
mtkclient + python
spft (sp flash tool)
ofp extractor
Your stock rom in OFP format.
Step 1. Download all of the things mentioned above.
Step 1a. Make sure your device is turned off. DO NOT PLUG IT IN.
Step 2. Install mtkclient using the guide on GitHub.
Step 3. Run
Bash:
$ py mtk payload
in your terminal.
Step 3a. When it says ***waiting for device*** hold both volume buttons and plug in your device.
This will enter BROM mode.
Step 4. Extract and open ofp extractor and extract your ofp.
Step 5. Open SPFT and click DOWNLOAD ONLY (do not I MEAN DO NOT PRESS FORMAT ALL.)
Step 6. In scatter, look for your scatter file. It should be (MTxxxxScatter.txt etc) Then select it.
Step 7. Select your auth file if you have one.
Step 8. Press Download and if the progress bar starts going the flash is going. DO NOT UNPLUG.
Step 9. Reboot after it says 'Download Ok'
Step 10. Enjoy your unbricked device!
NOTE In most cases the rom will be for android 10. Update if required through OZIP.
I cannot download with SPFlash. Error 0xC0060001. I'm sure that I have done all steps correctly including this tutorial:
Realme 7 Unbrick
Of corse I'm doing everything with Realme 7 5G RMX2111EU.
I had problems with disabling protection as follows but I think it finally succeeded.
1. bypass_utility-v.1.4.2 gives error
Code:
[2022-05-10 22:53:51.684562] Waiting for device
[2022-05-10 22:53:59.780976] Found port = COM4
[2022-05-10 22:53:59.921376] Device hw code: 0x996
[2022-05-10 22:53:59.921376] Device hw sub code: 0x8a00
[2022-05-10 22:53:59.921376] Device hw version: 0xca00
[2022-05-10 22:53:59.921376] Device sw version: 0x0
[2022-05-10 22:53:59.921376] Device secure boot: True
[2022-05-10 22:53:59.921376] Device serial link authorization: False
[2022-05-10 22:53:59.921376] Device download agent authorization: True
[2022-05-10 22:53:59.921376] Disabling watchdog timer
[2022-05-10 22:53:59.936976] Disabling protection
[Errno None] b'libusb0-dll:err [control_msg] sending control message failed, win
error: A device attached to the system is not functioning.\r\n\n'
[2022-05-10 22:54:01.028978] Payload did not reply
Press any key to continue . . .
2. mtk-client gives error:
Code:
....Preloader
Preloader - [LIB]: ←[31mStatus: Handshake failed, retrying...←[0m
Preloader
3. MTK Meta Utility v37 success
Code:
Waiting for mtk usb device... ok
BootMode : BootRom[COM4]
DriverName : MediaTek USB Port_V1633
DriverPath : usb\vid_0e8d&pid_0003\5&278a3c80&0&2
DriverID : wdm_usb
DriverVersion : 3.0.1504.0
DriverDate : 1-22-2015
InfPath : oem28.inf
ProviderName : MediaTek Inc.
Connecting to BootROM......
● Chipset MT6853
● Identifier Dimensity 720/800U 5G
● Info 8A00_CA00_0000_Mouton
● MEID:3EFFEA531AB22A57AB0240D8421E92B4
● SecCFG SBC+SDA
Disable BRom protection...
MTK Auth Disable(SLA/DAA) success!
now you can use SP Flash Tool or any MTK Tool
4. MTK Auth Byoass Tool v6.0.0.1 success
Code:
Waiting for mtk usb device... ok
BootMode : BootRom[COM4]
Sync with bootrom started...
● Chipset MT6853:Dimensity 720/800U 5G
● Code Mouton
● Hw Sub 8A00
● HW Ver CA00
● SW Ver 0000
● SecCFG SBC+SDA
Disable brom protection.
Bypass Payload ACK = 0xa1a2a3a4
MTK Secure Boot Bypasss success!
now you can use SP Flash Tool or any MTK Tool
czaroslaw said:
I cannot download with SPFlash. Error 0xC0060001. I'm sure that I have done all steps correctly including this tutorial:
Realme 7 Unbrick
Of corse I'm doing everything with Realme 7 5G RMX2111EU.
I had problems with disabling protection as follows but I think it finally succeeded.
1. bypass_utility-v.1.4.2 gives error
Code:
[2022-05-10 22:53:51.684562] Waiting for device
[2022-05-10 22:53:59.780976] Found port = COM4
[2022-05-10 22:53:59.921376] Device hw code: 0x996
[2022-05-10 22:53:59.921376] Device hw sub code: 0x8a00
[2022-05-10 22:53:59.921376] Device hw version: 0xca00
[2022-05-10 22:53:59.921376] Device sw version: 0x0
[2022-05-10 22:53:59.921376] Device secure boot: True
[2022-05-10 22:53:59.921376] Device serial link authorization: False
[2022-05-10 22:53:59.921376] Device download agent authorization: True
[2022-05-10 22:53:59.921376] Disabling watchdog timer
[2022-05-10 22:53:59.936976] Disabling protection
[Errno None] b'libusb0-dll:err [control_msg] sending control message failed, win
error: A device attached to the system is not functioning.\r\n\n'
[2022-05-10 22:54:01.028978] Payload did not reply
Press any key to continue . . .
2. mtk-client gives error:
Code:
....Preloader
Preloader - [LIB]: ←[31mStatus: Handshake failed, retrying...←[0m
Preloader
3. MTK Meta Utility v37 success
Code:
Waiting for mtk usb device... ok
BootMode : BootRom[COM4]
DriverName : MediaTek USB Port_V1633
DriverPath : usb\vid_0e8d&pid_0003\5&278a3c80&0&2
DriverID : wdm_usb
DriverVersion : 3.0.1504.0
DriverDate : 1-22-2015
InfPath : oem28.inf
ProviderName : MediaTek Inc.
Connecting to BootROM......
● Chipset MT6853
● Identifier Dimensity 720/800U 5G
● Info 8A00_CA00_0000_Mouton
● MEID:3EFFEA531AB22A57AB0240D8421E92B4
● SecCFG SBC+SDA
Disable BRom protection...
MTK Auth Disable(SLA/DAA) success!
now you can use SP Flash Tool or any MTK Tool
4. MTK Auth Byoass Tool v6.0.0.1 success
Code:
Waiting for mtk usb device... ok
BootMode : BootRom[COM4]
Sync with bootrom started...
● Chipset MT6853:Dimensity 720/800U 5G
● Code Mouton
● Hw Sub 8A00
● HW Ver CA00
● SW Ver 0000
● SecCFG SBC+SDA
Disable brom protection.
Bypass Payload ACK = 0xa1a2a3a4
MTK Secure Boot Bypasss success!
now you can use SP Flash Tool or any MYKI Tool
Click to expand...
Click to collapse
What more.info about the error code do you have? Also are you on windows because spft buggy on linux
BROM ERROR : STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001)
Windows 7
SP_Flash_Tool_v5.2208_Win
czaroslaw said:
BROM ERROR : STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001)
Windows 7
SP_Flash_Tool_v5.2208_Win
Click to expand...
Click to collapse
Then you haven't bypassed brom, try mtkclient again and don't unplug your device
Mtk client gives error: Preloader - [LIB]: ←[31mStatus: Handshake failed
Install mtk drivers and Libusb, also pyserial
All above mentioned was installed. I tried different pack from droidwin and I get this:
Code:
Port - Device detected :)
Preloader - CPU: MT6853(Dimensity 720 5G)
Preloader - HW version: 0x0
Preloader - WDT: 0x10007000
Preloader - Uart: 0x11002000
Preloader - Brom payload addr: 0x100a00
Preloader - DA payload addr: 0x201000
Preloader - CQ_DMA addr: 0x10212000
Preloader - Var1: 0xa
Preloader - Disabling Watchdog...
Preloader - HW code: 0x996
Preloader - Target config: 0xe5
Preloader - SBC enabled: True
Preloader - SLA enabled: False
Preloader - DAA enabled: True
Preloader - SWJTAG enabled: True
Preloader - EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: False
Preloader - Root cert required: False
Preloader - Mem read auth: True
Preloader - Mem write auth: True
Preloader - Cmd 0xC8 blocked: True
Preloader - Get Target info
Preloader - BROM mode detected.
Preloader - HW subcode: 0x8a00
Preloader - HW Ver: 0xca00
Preloader - SW Ver: 0x0
Preloader - ME_ID: 3EFFEA531AB22A57AB0240D8421E92B4
Preloader - SOC_ID: DAA82CB9D5E03916132A0BE2A479C0CC0FFD2B10
1E00173F9EA9FCB44C88FC8E
PLTools - Loading payload from mt6853_payload.bin, 0x264 bytes
PLTools - Kamakiri / DA Run
Kamakiri - Trying kamakiri2..
Kamakiri - Done sending payload...
PLTools - Successfully sent payload: D:\Apk\MTK Bypass Tools\mtkclient-main\mtkc
lient\payloads\mt6853_payload.bin
Be sure to use in SPFT, in connection check USB full speed, and in general settings, uncheck the options Check LIB DA Match and Storage Life Cycle Check.
If this doesn't work, try to flash only preloader firstly, and then flash the rest, upload some screenshot if the error persists.
That means it worked
Ok. Bootloader is unlocked but now I have dm-verity corrupted.
I cannot enter recovery mode. Some error flashes on screen and immediately reboot. I cannot even read this. I have found that it might be:
the serial is not matched
fastboot_unlock_verify failed
I cannot enter fastboot mode. It gives:
Orange state
The device is unlocked and cannot be trusted
and then restarts
Normal boot gives:
dm_varity corruption
Your device is corrupted
It won't be trusted and may not work properly
Press power button to continue
Then pressing power button boots into system correctly and the phone is working.
How to get rid of these errors? How to recover access to recovery and fastboot mode? Should I flash some partitions again from stock formware?
Should I install PBRP using mtkclient as in this guide?
Install TWRP Recovery without using Fastboot Mode [MediaTek]
And then should I root it using patched Magisk as follows?
Root MediaTek Devices without using Fastboot Mode [via MTK Client]
There is some info about patched version of Magisk for MTK devices. Should I use it?
do
Code:
fastboot flash --disable-verity --disable-verification vbmeta {your vbmeta.img}
czaroslaw said:
Ok. Bootloader is unlocked but now I have dm-verity corrupted.
I cannot enter recovery mode. Some error flashes on screen and immediately reboot. I cannot even read this. I have found that it might be:
the serial is not matched
fastboot_unlock_verify failed
I cannot enter fastboot mode. It gives:
Orange state
The device is unlocked and cannot be trusted
and then restarts
Normal boot gives:
dm_varity corruption
Your device is corrupted
It won't be trusted and may not work properly
Press power button to continue
Then pressing power button boots into system correctly and the phone is working.
How to get rid of these errors? How to recover access to recovery and fastboot mode? Should I flash some partitions again from stock formware?
Should I install PBRP using mtkclient as in this guide?
Install TWRP Recovery without using Fastboot Mode [MediaTek]
And then should I root it using patched Magisk as follows?
Root MediaTek Devices without using Fastboot Mode [via MTK Client]
There is some info about patched version of Magisk for MTK devices. Should I use it?
Click to expand...
Click to collapse
If it says DM-verity error, reflash with spft and on mtkclient, relock BL by using
Code:
Py mtk da seccfg lock
I cannot enter fastboot mode so I cannot use fastboot flash.
Second advice: I do not want to lock bootloader.
If you are able to boot to stock, do ADB reboot fastboot
Does not work. It gives the same as VolUP+PWR. Orange state message and reboot.
I cannot enter fastboot in any way.
Should I flash something in brom mode? Recovery partition? Something else to get rid of dm_varity?
Reflash firmware then try, idk this hasn't happened to me
Also send the link of the firmware U got
I have RMX2111_11_C.11. Updated via OTA. I cannot find such version firmware file.
The newest I found is:
RMX2111GDPR_11_C.09 EDL mode
czaroslaw said:
I have RMX2111_11_C.11. Updated via OTA. I cannot find such version firmware file.
The newest I found is:
RMX2111GDPR_11_C.09 EDL mode
Click to expand...
Click to collapse
Relock bootloader and try using this to reunlock bl