Hello everyone,
First I'm sorry to post this here but I didn't find any mediapad M6 section on XDA.
I don't understand why nothing happen (no prompt) when I connect the tablet to my PC using USB cable. Even on the PC I have nothing connected. The tablet is only charging.
This is weird because I also have a Huawei Mate 10 and using the same cable I get the prompt on my phone if want to "transfer photos, files, charge only..." and the PC recognize that something is connected !
I would be grateful if someone could help, thank you.
edit: I'm using EMUI 10.0.0.186 after downgrade using Hisuite proxy.
Related
I have rooted my phone using this thread.... http://forum.xda-developers.com/showthread.php?t=2033788 and it worked fine and I tried to install a new JB 4.1.2 ROM and after installation of some %, it showed an error no. 7 and showed a message Installation Aborted. stopped in the middle and now my phone is not strarting.
Also to start "ADB Made Easy" it always shows .net framework error. I am using Win 8.1PRO. Since ADB ME is not compatible with Win 8, I have installed the same on my neighbour's PC who is using Win 7 Ultimate.
When the desktop speakers are ON, when I connect the A100 to the PC, with the help of speakers, I am able to listen to the sound that it is connected. I tried the same on a PC with XP and he (mobile technician) also confirmed that it works.
I have tried all the possible ways that are shown in this forum like VOL Down + Powerkey at the same time and connecting to the pc with usb cable and executing the program fastboot_upgrade.bat from A100 Fastboot_upgrade tool downloaded from this forum.
I will be more thankful to the people who can help me in this regard.
Thanks in advance.
Murthy, Just a Starter on this site as a thread poster.
:crying: i have hp laptop with windows 8.1 enteprise after install windows 8.1 enterprise all goes well my sola can connect fastboot flashmode and also mass storage but suddenely i cant connnect it via as maas storage(flashmode,fastboot) its show only charging plsss help me guysss:crying:
no idea for win 8.1 , but you can try this.
http://forum.xda-developers.com/showthread.php?t=2095087
it is probably a driver problem and generally happens in win8/8.1, when you perform updates in windows.
NOTE : make sure that you are not trying to connect the phone to usb 3.0 or above, the last time i checked, our phones does not support such connection.
--------------------
if you have flashed some ROM, and it changes the device id, like LT27i to LT27a ( check it in settings ), then installing proper drivers of flashtool might correct your problem.
rim01126 said:
:crying: i have hp laptop with windows 8.1 enteprise after install windows 8.1 enterprise all goes well my sola can connect fastboot flashmode and also mass storage but suddenely i cant connnect it via as maas storage(flashmode,fastboot) its show only charging plsss help me guysss:crying:
Click to expand...
Click to collapse
i tried it all but i remember week ago i use duplicate charger then it short circuit and second day when i connect my mobile in pc its not recognize only charging show
plssss helplppp me guys:crying:
try connecting your phone with win xp/7 pc ( any friend's or neighbor's ). if the device is not recognized as a peripheral even once in any and all of the pc, then you should get the usb port checked. lets hope everything is all right !
connect your phone in xp/7 and look for any drivers installing notification in task bar.
if not, go to device manager and look for the device in all usb ports the pc has.
i suggest you to try this in 2 computers. if any one has ubuntu ( or any other linux distro ), you can try that too.
rim01126 said:
i tried it all but i remember week ago i use duplicate charger then it short circuit and second day when i connect my mobile in pc its not recognize only charging show
plssss helplppp me guys:crying:
Click to expand...
Click to collapse
thnkx bro but already try its but no result only charging start when i connect my sola in pc i think i fried my charging port and bootloader plssa give me any procedure for fix this problem and my sola is now running carbon rom cm11 but i wanna go to ics then i want help plss help me and sorry for my bad English
Good morning all,
I am looking for help. I can't connect my phone to my Dell Inspiron 15 Laptop running Windows 8.1. I would like to connect my phone as a USB device to via USB cable to transfer photos, videos and music back and forth. I used to be able to do this, but for some reason it has stopped working. Now when I connect the phone I get the notification "USB Device not recognized". When clicking on the bubble, it expands to "The last USB device you connected to this computer malfunctioned and Windows does not recognize it".
The phone connects successfully to a Dell Precision M4700 running Windows 7 Enterprise SP1 and a HP Pavilion running Win 7 Home Prem SP1. The USB cable is original. So my guess is that it has something to do with Windows 8.1.
As I mentioned, it worked in the past before on this computer, but now it won't recognize as a USB device. Also, this problem also appears on an old HTC EVO and a Samsung Intercept. They connect to the Win 7 laptops, don't get recognized on the Win 8.1
I have read ideas about deleting USB from Device Manager or updating drivers for Win 7, but nothing specific about Win 8, so I haven't tried anything yet. I did unplug, remove battery from laptop, reboot, removed battery from phone (the old EVO, the new one I can't), etc. Cable and phone work fine on Win 7, not on Win 8.
Any ideas on how to solve this are greatly appreciated.
I believe you'll need the Intel drivers for everything to work properly. Check out this thread for more info.
http://forum.xda-developers.com/showthread.php?t=2347317
Magnum_Enforcer said:
I believe you'll need the Intel drivers for everything to work properly. Check out this thread for more info.
http://forum.xda-developers.com/showthread.php?t=2347317
Click to expand...
Click to collapse
Thanks for pointing out the thread. I have gone through all of it, but I am not using ADP or Fastboot. I haven't installed any drivers other than HTC Sync (which I uninstalled after they didn't work). Some of the solutions ask to look up the android device on Device Manager to update drivers, but I don't see the device on the list.
Sorry for being such a noob, but I am frustrated I can't connect my phone as a USB drive to transfer photos, etc. Any specific ideas I can try?
Thanks again.
Im haveing teh same probum verry annoying!
Calling all A95X MAX owners!
Has anyone successfully connected this TV box to a PC in order to send ADB commands?
I installed the S905X2 USB drivers that come with the S905X2_USB_Burning_Tool. With USB debugging on, I put the A95X MAX into bootloader and connected it to my PC with a male-to-male type-a USB cable, but there was no reaction in the PC's device manager, where you'd expect to see the Android USB driver appear when a connection is made. (I did get power throught the cable, for when I unplugged the power to the A95X MAX it remained on with the USB cable plugged in.)
Is there something I don't know about or has no-one here tried to connect the box to a PC via USB?
It would be useful to send ADB & fastboot commands to this TV box.
I feel your pain
doktorspin said:
Calling all A95X MAX owners!
I also have tried to connect via usb to the a95x max us and MANY other amlogic manufactured tv boxes without success.
You would think some expert person from this forum would respond to this issue once and for all... GRRRR....but noooooooo, no such expert person seems to want to answer the bell here or in any other related tech forum I have gone to. Is it possible no one on the planet knows the answer to this?
Attempting tech support at both gearbox and geekbuying websites, places where one typically purchases such tv boxes have yielded nonsensical/completely useless/incompetent answers so no point going there for any such related support.
Anyway. From what have been able to observe, the burning tool driver shown as "libusb-win32 usb devices" known strangely as the "world cup" driver, "only works for the burning process app as far as the box being recognized by the burning tool app via a USB connection but it seems it has nothing to do with the device being recognized by the ADB.EXE PC side app when using the USB connection.
For that you need an "android composite ADB interface driver". Unfortunately, none of the google or Microsoft or any "universal" ADB USB drivers I have tried, seem to work for these amlogic tv boxes which throws you back to having to go to the amlogic manufacturer to download their drivers from there.
Although this makes almost too much sense, you won't find any downloadable drivers at their site, "amlogicdot com, so we all are back to step one...GRRRRR.
So, until a forum expert from this xda-developers site finally decides to help with this issue....if in fact that will ever happen, we are all pretty much stuck in the mud here as far as the needed USB connection. Until that happens, here is a work around I developed which will let you communicate with these boxes without the need for any USB drivers as long as such amlogic boxes come rooted.
The TCPIP wireless or wired connection trick:
What many folks don't know is that if the box is unrooted you will ALWAYS need to have an initial USB connection before one can switch over to a tcpip connection ("ADB tcpip 5555" command after you have FIRST established a USB connection), but if the box is rooted you do NOT have to have an initial successful USB connection!!!
The secret is to switch over to tcpip at the Android device FIRST by using one of many apps on the android device that activates this such as "WIFI ADB" or "ADB WIFI reborn" app etc. Don't bother with the ones that say no root or any other app that says you need to connect a USB cable first since that defeats the whole point of this post right?...smile.
The app typically will give the IP address of your device along with the command needed on the PC side such as "ADB connect 192.168.1.3:5555" (the device IP address along with its port number ) which allows you to connect your PC to the android device via tcpip WITHOUT ever connecting to any USB cable and having to worry about non functioning USB drivers.
In closing, although I think I have provided a life saver solution for those that cannot get the USB connection to work to still be able to connect to their android device regardless of a non-working USB connection, there are cases where windows apps relying on ADB won't work even with a rooted device because these developers at program entry, STUBBORNLY just look for a USB connection instead of looking and USING A-N-Y valid and working connection as should be the case regardless if it’s thru USB or tcpip.
If any other forum member can help us figure out how to force these win apps to use ANY available valid working connection and not just a usb connection this post would then have a COMPLETE solution to this issue.
Hopefully the explained tcpip work around in this post can help those stuck with a non-working usb connection.
Cheers Ed Ray;
Click to expand...
Click to collapse
Ed,
Thanks for your response. I've been trying another approach to deal with my basic problem of being able to flash a system image (a ROM) onto the A95X MAX. It mainly involved trying to get TWRP running and get it to flash the image. That seemed to be unsurmountable. So now I'm looking into the possibility of putting the system image into a zip file with a little glue and using stock recovery to flash it from the SD card.
In the process I found instructions as to how to get ADB up & running over ethernet here:
https://stackoverflow.com/questions/2604727/how-can-i-connect-to-android-with-adb-over-tcp
Sounds like it should work, but I'm drained on this system into a zip file thing.
Cheers.
My phone previously transferred the file to the computer as usual.
Yesterday when I connected to the computer. The phone is currently charging only and no notifications are displayed on the computer ( maybe on the previous connection I chose to charge only without transferring the file when connected to the computer)
I tried every possible way such as changing cap, changing pc (win 7, win 10), restoring factory settings, USB debugging, develope option ... but all failed.
I'm not good at english so I used google translate. . sorry for the inconvenience
Pls Help !!!
Android 9 Pie
https://drive.google.com/open?id=1Su...dQX3AVi3DSSs2s
https://drive.google.com/open?id=1Sr...3-lZJk8nTcL6V_
https://drive.google.com/open?id=1Sq...5D15WiuB43GKAT
https://drive.google.com/open?id=1Sp...B8A_ESW37MiCk5
Seiraaa said:
My phone previously transferred the file to the computer as usual.
Yesterday when I connected to the computer. The phone is currently charging only and no notifications are displayed on the computer ( maybe on the previous connection I chose to charge only without transferring the file when connected to the computer)
I tried every possible way such as changing cap, changing pc (win 7, win 10), restoring factory settings, USB debugging, develope option ... but all failed.
I'm not good at english so I used google translate. . sorry for the inconvenience
Pls Help !!!
Click to expand...
Click to collapse
My problem is similar to this article https://forum.xda-developers.com/lg-v30/help/usb-file-transfer-issues-phone-linux-t3762401