I just receive my aramid case for S22 Plus. Bought on AliExpress, delivered to France in 10 days (I'm still waiting for the one ordered to Latercase many weeks ago...)
This case is very well build and add minimum bulk to the S22 Plus. The cost is less expensive than the Latercase : only 21,49€ vs $55 (50,41€) with shiping on Latercase
I received today the Latercase aramid case for S22+. I'm very disappointed. This case has no top and bottom protection and the side buttons are not protected. This case is more than twice the price of the Aliexpress one tested before with less protection.
This case is as thin as the Aliexpress one. The weight is 11g compared to the 13g of the Aliexpress one.
If you're looking for an aramid case, the Aliexpress is the right choice (better protection and price, same quality)
Can you link to the Aliexpress seller?, there seem to few cases and some looks as of lesser quality
SYIJIAFA Store on Aliexpress
The Aliexpress case looks much better than the youtuber version. I personally like first party accessories. I got the green silicon case just cuz the green leather has never been available
Those look nice, I always go for thicker cases for drop protection though..
I like this protector but it is plastic so the side frames will scratch from it so I prefer something smooth and scratch-proof!
I got this marble skin for my S22 Plus from Gadgetshieldz and it looks amazing with the marble look!
cakebytheocean said:
I got this marble skin for my S22 Plus from Gadgetshieldz and it looks amazing with the marble look!
View attachment 5570655View attachment 5570657
Click to expand...
Click to collapse
Only back side or the edges also ?
marko94 said:
Only back side or the edges also ?
Click to expand...
Click to collapse
I got the full body mobile skin for my phone so the edges and corners are covered! Check on the website you can also get skins for only the back too!
cakebytheocean said:
I got this marble skin for my S22 Plus from Gadgetshieldz and it looks amazing with the marble look!
View attachment 5570655View attachment 5570657
Click to expand...
Click to collapse
The skin is perfect for the S22 Plus, is the skin giving grip because I want one like that to make my phone look beautiful
clairelara said:
The skin is perfect for the S22 Plus, is the skin giving grip because I want one like that to make my phone look beautiful
Click to expand...
Click to collapse
Yes, the skin has a rough surface so it gives a good grip for the phone to hold. Also, these skins are 3M vinyl material so it is thick and protective too!
cakebytheocean said:
Yes, the skin has a rough surface so it gives a good grip for the phone to hold. Also, these skins are 3M vinyl material so it is thick and protective too!
Click to expand...
Click to collapse
Thanks for the info I'm gonna order now for my S22 Plus and hope the skins are delivered soon!
I use only matte ppf ptotective film, full frame. It looks 99% as the bare phone. Added no thinkness, and no more slipperiness. Also protects the frame from simple scratchess.
Of course it adds no real protection from dropping. However, it's not my concern as I didn't drop my previous phone in two years after using the same type of ppf full frame sticker - before that I dropped two times as the glass was too slippery.
Related
I do not usually put my phone in a case because I do not like to add bulk. I like to keep it as slim and trip as possible. I am coming from a prior phone that had a rubberized surface on the edges and back (Droid MAXX - the original). The Pixel is a bit slippery for me.
I am curious what solutions people would recommend for the best way to add grip to the Pixel without adding bulk. Maybe I need to go with one of the thin cases, or maybe there is a skin that could help? I don't need to decorate the phone, but if there is a skin that helps it grip better I would give it a try.
Your options are case, skin, and naked. For cases, you're not going to get any thinner than the Nillkin Nature cases. I'm not a fan of the one I have but it's undeniably low in bulk. For skins, the are a ton of options and you'll have a variety of opinions but if you don't want a case, that's about your best option.
Some skins are grippier than others, even win a single manufacturer, so it's worth asking the manufacturer about it. For example, for dBrand their grippier skins tend to be the carbon fiber options.
Good luck!
I've said this in the other cases thread on here, but I'll post again just in case people don't know about that other thread.
Caudabe (http://www.caudabe.com) makes great, very slim cases for iPhones.
If you email/tweet them to make Veil XT for Google Pixel/Pixel XL, they might consider it.
You can try reaching out to Shumuri too (http://shumuri.com)
I wish that their was an antigravity case for the pixel... I can't stand mounts and would love to just stick my phone to my instrument panel
Based on my experience with them on other phones, a skin won't provide anywhere near as much grip as the surface on that Droid Maxx.
Instead, take a look at the thread on ultra-thin cases:
http://forum.xda-developers.com/pixel/accessories/ultra-case-t3483579
The Nillkin Nature cases are very slim and definitely add grip to the phone. You can see pics in my post here:
http://forum.xda-developers.com/pixel/accessories/pixel-t3475315/post69764947#post69764947
Google Pixel (XL) Matte Black Skin Premium Quality SAMSUNG 3M Scotchprint 1080
http://www.ebay.com/itm/291970270753?var=590965880055
You can't go wrong with the UAG cases. The plasma series is surprisingly thin and light, but really has great edge and drop protection. they feel great in the hand. They are a little higher in price, but totally worth it.
https://urbanarmorgear.com/collections/type-plasma-series/products/plasma-series-google-pixel
I had one for my Note 5 and then S7, and I'm will be picking up another for my Pixel.
Sent from my Pixel using Tapatalk
Metalsauce said:
You can't go wrong with the UAG cases.
Click to expand...
Click to collapse
+1. I received the Ice case yesterday; using it on the silver Pixel. I wanted a slim grippy case, one with black rubber to hide the darkening that occurs with time on rubbery areas of phone cases, and a clear back to display the silver/white of the phone. This case is PERFECT. It looks great. And the grip is fantastic.
I just received a blue Speck Presidio Grip and it's a very nice case for adding grip. The blue one is hard to find unless you pay quite a bit of $$ (I found a listing on eBay for used under $20) but the black version can more easily be found for under $20.
The case fits very well without being too difficult to take on and off. The added grip is good without being extreme. The hard plastic has a nice matte feel to it (the previous Speck cases I had was glossy but I like this better). And the buttons have a good clicky feel to them. It's not a minimalistic case like the Nillkin Nature but it's tons better than something like the Incipio Dual Pro.
Hope this helps somebody!
I've been meaning to try the DBrand skins for a while. Just ordered the bamboo version for my silver Pixel. Will update how it is. I have high hopes as the reviews are overwhelmingly positive.
Sent from my Pixel
kkh786 said:
I've been meaning to try the DBrand skins for a while. Just ordered the bamboo version for my silver Pixel. Will update how it is. I have high hopes as the reviews are overwhelmingly positive.
Click to expand...
Click to collapse
They are very good skins! Do yourself a favor and be sure to use their videos for installation, don't skip steps, and give yourself plenty of time.
Just installed the bamboo skin. Looks good. Not perfect installation as am not patient enough. Haha.
Sent from my Pixel
I'm getting a Slickwrap skin. I've been using dbrand for a while now... Just want to try something different.
I've purchased two Toast skins now and I really like them. Because they are actual wood they are really nice and grippy with the added benefit of that if you drop your phone, the wood will absorb some of the shock. It's prevented a few dings for me. Plus they can laser etch anything you want on there...
josephpalozzi said:
I've purchased two Toast skins now and I really like them. Because they are actual wood they are really nice and grippy with the added benefit of that if you drop your phone, the wood will absorb some of the shock. It's prevented a few dings for me. Plus they can laser etch anything you want on there...
Click to expand...
Click to collapse
I've had Toast on phones and laptops. Great products although I prefer them on non-phone devices because it's impossible to put a case over top of it and sometimes you just need heavy duty protection.
grippy case
Hi
I got this within 10 days of ordering - very cheap - but it really adds grip and hardly any bulk
https://www.aliexpress.com/item/Bla...nti-slip-soft-case-cover-for/32774241635.html
Pictures on the site are accurate
Jools
snowdej said:
Hi
I got this within 10 days of ordering - very cheap - but it really adds grip and hardly any bulk
https://www.aliexpress.com/item/Bla...nti-slip-soft-case-cover-for/32774241635.html
Pictures on the site are accurate
Jools
Click to expand...
Click to collapse
Looks good. Could you post some actual real life photos with the phone in it?
kEvinErd said:
Looks good. Could you post some actual real life photos with the phone in it?
Click to expand...
Click to collapse
Hi
https://goo.gl/photos/H2qcY2ECW1AcxEfEA
I have a best skins ever fitted with the glossy screen and matte body.
Also I have a qi receiver. You can see the USB port blocked by it
The buttons are cut outs so are quite recessed. I had a spigen case on just before that covers the buttons
This case is much less bulky than the spigen
The headphone port is possibly slightly wrong. If you have a headphone socket with a bulky top it might struggle. This is being picky though and I could just get a scalpel to it to increase the hole a mm
Jools
devilsadidas said:
I wish that their was an antigravity case for the pixel... I can't stand mounts and would love to just stick my phone to my instrument panel
Click to expand...
Click to collapse
There is the anitgravity space:https://megatinycorp.com/products/anti-gravity-space
This basically just sticks on to any case
Hello guys,
I am still doing my search for an ultra-thin case with mate finish for my S8. It is something like the Peel cases for iPhone (sadly they don't care about Samsung phones).
There are some thin cases but I often don't like their glossy finish or the case is not well built.
If anyone knows a case like the Peel, please let me know
AirSupply said:
Hello guys,
I am still doing my search for an ultra-thin case with mate finish for my S8. It is something like the Peel cases for iPhone (sadly they don't care about Samsung phones).
There are some thin cases but I often don't like their glossy finish or the case is not well built.
If anyone knows a case like the Peel, please let me know
Click to expand...
Click to collapse
I'm using this one from Amazon and very happy with it - only scratch protection, but that's what I was looking for - https://www.amazon.com/gp/product/B06XHFYJM7
I just purchased this one. Waiting for it to come in Wednesday. I can post some pictures once I have it.
https://www.amazon.com/gp/product/B06XGQM76L/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
ddenson said:
I'm using this one from Amazon and very happy with it - only scratch protection, but that's what I was looking for - https://www.amazon.com/gp/product/B06XHFYJM7
Click to expand...
Click to collapse
This looks like what I wants. I ordered the blue one but wished that they made the white/mate version as welll
I'm using spigen thin fit. Matte black and has some grip.
konman795 said:
I just purchased this one. Waiting for it to come in Wednesday. I can post some pictures once I have it.
https://www.amazon.com/gp/product/B06XGQM76L/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
This looks closest to peel/Cali case I always use, will be purchasing this for myself , got the wife a Spigen liquid armor she needs a bit more protection
Received the elago case today in black. Cut outs are exact and fit is good, seems to be a bit of movement along the edges.
Perfect for scratch protection and a screen protector should work great with the elago.
Sent from my SM-G955U using Tapatalk
Spigen AirSkin
https://www.spigen.com/products/galaxy-s8-case-air-skin?variant=30613364033
Shuthefrontdoor said:
This looks closest to peel/Cali case I always use, will be purchasing this for myself , got the wife a Spigen liquid armor she needs a bit more protection
Click to expand...
Click to collapse
This is CaliCase. They changed their name.
Get the elago case from Amazon. It's sooooooooooooo slim! It's .3 I believe and leaves you the flush look of the phone. Just need a decent screen protector now lol
https://www.aliexpress.com/item/CAF...32749572685.html?spm=2114.13010608.0.0.cmWG3X
bought this. dirt cheap and very slim
@guaneet Elago case is not available as transparent case?
Tatsch said:
@guaneet Elago case is not available as transparent case?
Click to expand...
Click to collapse
Nope - the one negative for me. If it was, it would be perfect, but otherwise it's great
Spigen AirSkin is the best quality and closest you'll get to Peel or Caudabe.
+1 for Spigen Airskin. It is .36mm and the peel is .35mm. It is *very* thin, bordering on scratch-only protection.
Are you guys speaking from experience on the S8? The Spigen air skin doesn't fit my S8 for some reason, it's just a tad bit too narrow. Spigen was nice enough to replace it, but the new one is the same.
MNML fits perfectly and is the same ultra thin type case. It's my vote for the S8. The other benefit to the MNML case over the Spigen is, the bottom is covered on the MNML, while on the Spigen it's exposed.
I have the Spigen Air Skin on an S8 now and it fits perfectly. The bottom is exposed (except the corners) and the back cutout looks to be different (one big cutout) than the MNML (3 separate cutouts). Face down, it still sits without the front glass touching.
The Nillkin brand of cases out of china are good quality. I've owned a few version of their cases for different models of phone. If you want the slimist case that is TPU and gives some slight shock protection over not having a case, the NATURE line is awesome. I just ordered my clear S8 case from Amazon. can't go wrong with this case. I will update once it arrives.
Also, thing of note...this case has a separator for the camera and fingerprint reader. This actually helps out and functional to keep me from placing my finger on the camera. My current case has the same design as this was a feature I was looking for. Most of the cases has a large cutout on the back which I think was the cheap/fast way to release a case.
http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=&id=6851&page=1
I just got this case from Amazon.
Exactly what I was looking for.
Very slim, no branding, matte black.
Maxboost Galaxy S8 Plus Case mSnap [Perfect Fit] [Black] Samsung Galaxy S8+ / S8 Plus Case Anti-Slip https://www.amazon.com/dp/B06XS66SFG/ref=cm_sw_r_cp_apa_HKhbzb4MBPSPX
I got mine from a company called Bare Cases. Think they're a small company but the case felt very premium. Has a matte finishing. So far it's scratched at the back but I don't mind it cos I guess it protects my phone from those exact scratches.
The Spigen air skin didn't fit good and I just gave up with that.
On Jul 3rd I pre-ordered two dBrand skins for my OP5 and they arrived on Jul 6th. The two skins were the Mahogany wood (back and camera lens cover) and the Hyperblack Titanium (back with red camera lens cover and red 1+ logo). Even though I wanted to add the front Mahogany skins the fact that I've also ordered the Ozly tpsp screen protector made me realized I'd have issues whenever I needed to replace the screen cover.
Attached are pictures of both skins with accessories un-applied and the Mahogany skins applied including the camera lens cover. Notice that the two Mahogany skins have different wood patterns. Running your finger over each skin I realized that the Mahogany adds almost no additional grip to the slippery naked OP5 while the Hyperblack Titanium skin has more texture which I believed would add more grip. This is not to say that once applied the Mahogany skin did not reduce the overall slipper feel of a naked OP5, as it did. In the future I'll likely try the Hyperblack Titanium but right now I really like the Mahogany's overall look the best.
I still bought a cheap clear plastic case which is currently on a slow boat from China. I'll use it when I'm going someplace where accidents are more likely such as camping or a party. These skins are so thin that I don't anticipate putting the case on to be an issue.
This is the first time I've every bought or applied a skin as I've previously only gone with bumper cases. Over all I think the application went well but I certainly don't have the corner flaps applied as well as seen on dBrand's OP5 application video. Most definitely you need a hairdryer during application as I had a bubble under the skin and heating that section and the bubble's path to the outside saved having to peal the skin off to start again. It works much like you push bubbles out from a clear plastic screen protector. Getting the initial bottom alignment applied properly is the key to the rest of the application. Mess that up and you alignment issues multiply. Heating and stretching the skin is dangerous and only helps with the tiniest of misalignment.
The dBrands fit overall and specifically around the buttons is as perfect as a mass produced item can be. In conclusion, if you choose to use a skin you'd be hard pressed to find a brand with a more accurate fit.
P.S. For grip the Carbon Fiber would likely be your best bet but I thought it was butt ugly so went another way.
Edit: Added top, bottom, right and left side pictures.
Hyperblack comes along with the white 1+ logo? Or is it just the packaging design?
I am thinking of buying Black Dragon.
Usually, when is the Dbrand Sale? Any idea?
Thanks
observingi said:
Hyperblack comes along with the white 1+ logo? Or is it just the packaging design?
I am thinking of buying Black Dragon.
Usually, when is the Dbrand Sale? Any idea?
Thanks
Click to expand...
Click to collapse
No, what appears on the Hyperblack picture as a white 1+ logo is just the skin's backing tape. The Hyperblack I picked has a cut out of the 1+ logo then I ordered the red colored logo cut out to fill in the skin's logo cut out. On the Mahogany skin I chose not to have any 1+ logo so the skin was solid (no logo cut out at all). The Black Dragon skin was already available when I purchased my skins. I was tempted to get that instead of the Hyperblack.
I have no idea when there will be a sale. I didn't feel the price was too excessive. In fact I would have only bought the Mahogany at this time but the added $5 for shipping meant that a second skin only cost me an extra $6 and the shipping on both skins became free. That's much like how Amazon prices small items to be just under the free shipping costs to get you to buy one more item. In this case I went for it as a Hyperblack skin also tempted me.
I just got the black dragon skin with orange logo and camera cutout. I previously used the titanium and the hyperblack on my Nexus 6p and I can say that the dragon skin has a very similar texture than the hyperblack. IN terms of looks, I have to say that it looks similar to the hyperblack except for the cracked look/texture and the slight silver highlights in certain areas. All in all, I think it looks amazing on this device.
Im looking to grab one of the Mah Wood one and having it under my Orzly flexi case. It looks pretty amazing with the wood skin. Would you be able to show off the sides of the phone? I would love to see the fit on the sides
dBrand sure do make some precision skins! Let us know once you installed them!
Here is mine! Just finished. Marble with cement logo
A Guy Called Revive said:
Im looking to grab one of the Mah Wood one and having it under my Orzly flexi case. It looks pretty amazing with the wood skin. Would you be able to show off the sides of the phone? I would love to see the fit on the sides
Click to expand...
Click to collapse
I added pictures of both side and top and bottom to the original post. Don't be too harsh of my corner imperfections, I was a rookie
hmph @3DSammy don't I know you from my tab s threads?
Yep, new device new forum visits
Not Dbrand, but Gadgetshieldz. This is a carbon Flat Back.
HueleSnaiL said:
I just got the black dragon skin with orange logo and camera cutout. I previously used the titanium and the hyperblack on my Nexus 6p and I can say that the dragon skin has a very similar texture than the hyperblack. IN terms of looks, I have to say that it looks similar to the hyperblack except for the cracked look/texture and the slight silver highlights in certain areas. All in all, I think it looks amazing on this device.
Click to expand...
Click to collapse
Looking good!! I've ordered mine but with red logo cutout. Is there good grip with the black dragon skin? My only quirk with this device so far is how slippy the back is and was hoping the black dragon skin would sort that out for me..
wedgess said:
Looking good!! I've ordered mine but with red logo cutout. Is there good grip with the black dragon skin? My only quirk with this device so far is how slippy the back is and was hoping the black dragon skin would sort that out for me..
Click to expand...
Click to collapse
From what dBrand have been saying, the dragon skins look to be quite grippy. I'd love to use skins over cases but don't trust myself enough
DarkExistence said:
From what dBrand have been saying, the dragon skins look to be quite grippy. I'd love to use skins over cases but don't trust myself enough
Click to expand...
Click to collapse
I don't trust myself either!! Thinking of getting one of the rhinoshield bumpers so I can keep it looking nice, on the back at least :victory: Hopefully that along with the tempered glass SP I have one will protect it.. and so long as the skin is grippy I hopefully shouldn't drop it.
wedgess said:
I don't trust myself either!! Thinking of getting one of the rhinoshield bumpers so I can keep it looking nice, on the back at least :victory: Hopefully that along with the tempered glass SP I have one will protect it.. and so long as the skin is grippy I hopefully shouldn't drop it.
Click to expand...
Click to collapse
Just be careful with that combo on a Rhino Shield. they can rip off Tempered glass and the cases lately have been so tight getting them on with even a skin on is really hard and taking it off is even worse. I damaged my OP3 trying to get the Rhino Shield off when using a skin. best results is to cut the skin so it doesn't go up and down the sides or corners of the phone.
I still remember ordering that case there was no warning on the prouduct page about it not working with tempered glass and when I complianed and got nowhere a sudden disclaimer went up :/
wedgess said:
Looking good!! I've ordered mine but with red logo cutout. Is there good grip with the black dragon skin? My only quirk with this device so far is how slippy the back is and was hoping the black dragon skin would sort that out for me..
Click to expand...
Click to collapse
It definitely has some texture that helps the phone be less slippery but not as much as I expected. But it certainly help add a decent amount of grip, especially on the sides of the phone which are very thin and rounded.
Roxas598 said:
Just be careful with that combo on a Rhino Shield. they can rip off Tempered glass and the cases lately have been so tight getting them on with even a skin on is really hard and taking it off is even worse. I damaged my OP3 trying to get the Rhino Shield off when using a skin. best results is to cut the skin so it doesn't go up and down the sides or corners of the phone.
I still remember ordering that case there was no warning on the prouduct page about it not working with tempered glass and when I complianed and got nowhere a sudden disclaimer went up :/
Click to expand...
Click to collapse
Ye my mate was saying the RhinoShield on his OP3t is way too tight and difficult to get off. I saw one on a S8 and looks a fair bit looser, hoping it's a bit looser on the OP5 and fits.
Thanks for the heads up though:good:
HueleSnaiL said:
It definitely has some texture that helps the phone be less slippery but not as much as I expected. But it certainly help add a decent amount of grip, especially on the sides of the phone which are very thin and rounded.
Click to expand...
Click to collapse
Thanks, so long as it adds some amount of grip I'll be happy. If not I might just end up getting a case:good:
wedgess said:
I don't trust myself either!! Thinking of getting one of the rhinoshield bumpers so I can keep it looking nice, on the back at least :victory: Hopefully that along with the tempered glass SP I have one will protect it.. and so long as the skin is grippy I hopefully shouldn't drop it.
Click to expand...
Click to collapse
never had a bumper but always heard rhinoshield were the best, saw some youtube videos of them being dropped from 10 ft and surviving haha
I went with the dragon back myself...
ThaFranchize15 said:
I went with the dragon back myself...
Click to expand...
Click to collapse
So it does actually look as good in real life as in the renders then eh? How does it feel?
Any reviews or feedback on cases. I've always used a thin spigen TPU case with the carbon fiber look. Wouldnt mind another one or a suede feeling case.
Most of the good looking ones on ebay show no cutout on the rear for the fingerprint.
Thanks
I ordered the FitBag Beat in black from Amazon.com for the Xioami Mi Max 2 and it is the perfect fit sleeve/bag for the Mate 20 X. It works by itself or with the gel Case that came with it. Add a wallet sticker dohicky thing and it's a prefect wallet sleeve.
Here some really good and good quality smart (wake & sleep) flip cases from Aliexpres.
Those on the picture is genuine leather [emoji1303]
https://s.click.aliexpress.com/e/cqlvg5GG
https://s.click.aliexpress.com/e/bfXauUBm
https://s.click.aliexpress.com/e/F3fpRb2View attachment 4639846
For those of you who like the transparent cases i found one that is awesome. It has more screen protection than the stock case and has more corner protection. It's one of the best clear cases I've bought. It's similar in quality to a Spigen or Rinke Fusion case but 1/3 the price. I bought it from here:
https://www.ebay.com/itm/For-Huawei...var=432149566435&_trksid=p2060353.m2749.l2649
ajsmsg78 said:
For those of you who like the transparent cases i found one that is awesome. It has more screen protection than the stock case and has more corner protection. It's one of the best clear cases I've bought. It's similar in quality to a Spigen or Rinke Fusion case but 1/3 the price. I bought it from here:
https://www.ebay.com/itm/For-Huawei...var=432149566435&_trksid=p2060353.m2749.l2649
Click to expand...
Click to collapse
Grippy?
Anyone know where can I find this case?
I got this case and I feel it could provide decent protection. I am never a fan of thin or thick case. It's impossible to provide enough raised edges on thin cases. This case isn't perfect but I didn't find anything better yet.
torr310 said:
I got this case and I feel it could provide decent protection. I am never a fan of thin or thick case. It's impossible to provide enough raised edges on thin cases. This case isn't perfect but I didn't find anything better yet.
Click to expand...
Click to collapse
Got a link for this case?
I got mine from eBay but you could find it from AliExpress too.
https://www.ebay.com/itm/B-Case-For...543614?varId=453102348942&txnId=1795995856005
I received my carbon fiber skin today, It fits perfectly and has the camera protector as well.
ajsmsg78 said:
I received my carbon fiber skin today, It fits perfectly and has the camera protector as well.
Click to expand...
Click to collapse
Do you have a Link?
Just Google MojoSkins.
I got a few from them. Thier full protection skins are great but hard to get on perfect. The back portion goes on easy as the skin is thick making application simple. They also over back protectors (no side/top/bottom flaps) that I think work best.
Bought this J&D case off Amazon for $10.99CND. Not too bulky. Wicked drop protection soft TPU inside Hard shell outside. Plus has plugs built in to protect charger port and headphone jack. Plus the volume and power buttons are super clicky. Highly recommend.
The clear TPU case provided with the phone is functional (I dropped my phone onto a hard floor with this case on and the phone was fine), but I do find the phone 'slippery' to pick up with this case. I have the Nillkin nature series tpu case for my Xiaomi Mi Max 3 (same size phone) and it is great because its edges are coated with a frosted grip material. Nillkin make this case for the Mate 20 and Mate 20 lite, but not for the Mate 20 x. Does anyone know of a similar clear TPU case that (unlike the Huawei one) has frosted edges for a better grip?
I have quite a few cases and have a few more on the way. I was thinking of doing a case review eventually.
Still no cases made especially for the stylus pen?
Ditto on looking for a case that will also hold the pen.
Found one with pen holder!
https://www.ebay.com/i/332950831527?chn=ps
Ron
Nicey, nicey thx... Now ordered [emoji3]
ronr9286t said:
Found one with pen holder!
https://www.ebay.com/i/332950831527?chn=ps
Ron
Click to expand...
Click to collapse
Sendt fra min EVR-L29 med Tapatalk
i just got a Slim case from China, is made by TPU with a matte back ( no slippery ) finish. Is one of the most slim case i have ever seen, but in the same time it protect the phone very good. I got it for around 4 euro Free Shipping to Europe. it also come very good protected inside the package with bubble wrap
I have also look at another case ( Porsche Design ) made by TPU with a Tinted Tempered Glass Semi-Transparent back... i ask the seller to send me a Real Picture and he send me this one
https://www.androidcentral.com/best-google-pixel-4a-cases
just delivered...
fronto said:
https://www.androidcentral.com/best-google-pixel-4a-cases
Click to expand...
Click to collapse
it'll add some colors to "just black"
mzsquared said:
it'll add some colors to "just black"
Click to expand...
Click to collapse
I'm sticking with the Spigen Tough Armor, same one I have on my 3A right now. Along with a 3 pack of Shieldbrainz screen protectors (I went through 3 of those for the 3A in the time I had it, got the 3a just after it dropped).
Edit: Just received the Spigen and compared the case to the 3A case I have. It's just a tad bit shorter in length and just a little thicker but everything else seems right on. The cutouts on the end are even about the same so this gives me some idea of the size difference (seems negligible).
fronto said:
https://www.androidcentral.com/best-google-pixel-4a-cases
Click to expand...
Click to collapse
So I have been on a bit of a shopping spree (oops). Thankfully Amazon US has free returns on cases. I currently have the:
DiMiK case: https://www.amazon.com/dp/B084S3ZY9G/ref=cm_sw_r_cp_tai_jbZmFbDRNDBWQ
Caseology Vault: https://www.amazon.com/dp/B083Q4SY5G/ref=cm_sw_r_cp_tai_5aZmFb8PPY0N6
Spigen Liquid Crystal: https://www.amazon.com/dp/B083N54J5Y/ref=cm_sw_r_cp_tai_OaZmFbVDVR3P1
And tomorrow I get the Cyrill Brick Case: https://www.amazon.com/dp/B083QQTQ3V/ref=cm_sw_r_cp_tai_5.YmFb2PCB9HQ
Quick notes and observations.
1) All of the cases are the exact same size and thickness.
2) The DiMiK case is as cheap as you would expect. No real corner protection or grip and the form is not perfect.
3) The vault is great quality but notably heavier than the other cases. Outside of the extra weight, my main concern is grip from this case. The texture adds no real grip to the phone. Form is perfect.
4) Liquid crystal also has almost perfect build quality with one small imperfection on the inside of a corner. Very light weight with great protection. The grip on this case is fantastic (important to me). Unfortunately I think it will get noticeably scuffed and will eventually turn yellow.
Q: Are caseology and spigen made by the same company? The form, quality and packaging are almost identical. The difference is the color, weight and grip.
I wish I had a solid color liquid crystal case. That is why I am trying the brick case. No perfect solution yet.
Thought I would share with everyone.
Uh60m Pilot said:
So I have been on a bit of a shopping spree (oops). Thankfully Amazon US has free returns on cases. I currently have the:
DiMiK case: https://www.amazon.com/dp/B084S3ZY9G/ref=cm_sw_r_cp_tai_jbZmFbDRNDBWQ
Caseology Vault: https://www.amazon.com/dp/B083Q4SY5G/ref=cm_sw_r_cp_tai_5aZmFb8PPY0N6
Spigen Liquid Crystal: https://www.amazon.com/dp/B083N54J5Y/ref=cm_sw_r_cp_tai_OaZmFbVDVR3P1
And tomorrow I get the Cyrill Brick Case: https://www.amazon.com/dp/B083QQTQ3V/ref=cm_sw_r_cp_tai_5.YmFb2PCB9HQ
Quick notes and observations.
1) All of the cases are the exact same size and thickness.
2) The DiMiK case is as cheap as you would expect. No real corner protection or grip and the form is not perfect.
3) The vault is great quality but notably heavier than the other cases. Outside of the extra weight, my main concern is grip from this case. The texture adds no real grip to the phone. Form is perfect.
4) Liquid crystal also has almost perfect build quality with one small imperfection on the inside of a corner. Very light weight with great protection. The grip on this case is fantastic (important to me). Unfortunately I think it will get noticeably scuffed and will eventually turn yellow.
Q: Are caseology and spigen made by the same company? The form, quality and packaging are almost identical. The difference is the color, weight and grip.
I wish I had a solid color liquid crystal case. That is why I am trying the brick case. No perfect solution yet.
Thought I would share with everyone.
Click to expand...
Click to collapse
I ordered the clear spigen ultra hybrid
https://www.amazon.ca/dp/B083MT5SJX/ref=cm_sw_r_cp_apa_i_Ti3mFbSV4S21M
The brick case looks cool with the switchable buttons
BigOkie said:
I'm sticking with the Spigen Tough Armor, same one I have on my 3A right now. Along with a 3 pack of Shieldbrainz screen protectors (I went through 3 of those for the 3A in the time I had it, got the 3a just after it dropped).
Edit: Just received the Spigen and compared the case to the 3A case I have. It's just a tad bit shorter in length and just a little thicker but everything else seems right on. The cutouts on the end are even about the same so this gives me some idea of the size difference (seems negligible).
Click to expand...
Click to collapse
Can you post a link to those screen protectors?
kc6wke said:
Can you post a link to those screen protectors?
Click to expand...
Click to collapse
https://www.amazon.com/gp/product/B08D3W54DB/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Uh60m Pilot said:
Q: Are caseology and spigen made by the same company? The form, quality and packaging are almost identical. The difference is the color, weight and grip.
Click to expand...
Click to collapse
I believe so. If you go to the Spigen website, at the top there are links to Caseology and Cyrill, as well as the Spigen Gearlock collection, and all the websites are styled and formatted identically.
That and: https://trademarks.justia.com/owners/spigen-inc-2959513/
I grabbed the pastel black dbrand skin for mine. Phone's plastic and should survive a drop so no case for me.
BigOkie said:
I'm sticking with the Spigen Tough Armor, same one I have on my 3A right now. Along with a 3 pack of Shieldbrainz screen protectors (I went through 3 of those for the 3A in the time I had it, got the 3a just after it dropped).
Edit: Just received the Spigen and compared the case to the 3A case I have. It's just a tad bit shorter in length and just a little thicker but everything else seems right on. The cutouts on the end are even about the same so this gives me some idea of the size difference (seems negligible).
Click to expand...
Click to collapse
I just order the Spigen Rugged Armor this morning. https://www.amazon.com/Spigen-Rugged-Armor-Designed-Google/dp/B083N5DD7K/ref=sr_1_1?dchild=1&keywords=spigen+pixel+4a&qid=1597678531&s=electronics&sr=1-1
I have been happy with my nearly Spigen case for my OnePlus3T. I wish there was a bright red or blue besides just black...but I can live with black. I would have considered the Tough Armor If I had found that in my amazon searches. I like how the Tough Armor gets wider around the camera bump to protect it.
castlefox said:
I just order the Spigen Rugged Armor this morning. https://www.amazon.com/Spigen-Rugged-Armor-Designed-Google/dp/B083N5DD7K/ref=sr_1_1?dchild=1&keywords=spigen+pixel+4a&qid=1597678531&s=electronics&sr=1-1
I have been happy with my nearly Spigen case for my OnePlus3T. I wish there was a bright red or blue besides just black...but I can live with black. I would have considered the Tough Armor If I had found that in my amazon searches. I like how the Tough Armor gets wider around the camera bump to protect it.
Click to expand...
Click to collapse
Tough Armor is here
kc6wke said:
Tough Armor is here
Click to expand...
Click to collapse
I don't know how that case retails for 39.99 on Spigen's website, and only 14.99 on Amazon, but I ordered one just in case it's a momentary mis-pricing.
Spigen Tough Armor is the way to go. I've dropped my pixel 4a twice on concrete with no issues. I like the way it feels and it performs. Just wish it came in other colors.
There are not a lot of quality choices out there for the pixel 4a., but luckily this one is top drawer.
Nylo
Got a Caseology Parallax for the wife. She wanted something to add some color to the black phone. Case fits really well and the case looks really nice (if you're into their colors), but it's kind of a bit slippery. I have a feeling it won't be her forever case, but it's a fine case and will probably be the one she uses until we discover her forever case. Buttons are plenty clicky and the phone is plenty protected without being insanely bulky (it's not insanely thin either - it's in the middle of the spectrum but towards the bukly end). She usually goes with a Speck Presidio Grip case, but wanted to try something new. If you don't need a grippy or minimal case, I'd recommend it.
It fits perfectly with an OMOTION or Orzero TGSP.
Got this from Amazon
https://www.amazon.com/dp/B086X647CC?ref=ppx_pop_mob_ap_share
2 cases for $8
Since I got my phones today and put these on- the fit well, corners are protected, covers the camera. Does everything a case should do
Did I mention it's $8 for 2 cases?
My biggest "look-for" is a case that will allow a phone ring holder to adhere to it securely. That rules out the Caseology Parallax unfortunately for me..
I got a spingen; Black thin; https://www.amazon.com/Spigen-Thin-Designed-Google-Pixel/dp/B083N3YT4Z#ace-g7448806443
I got the same one as above^ and two more from the Spigen brand. I love the quality feel on them. Definitely recommend Spigen.
I purchased the Caseology Vault case. Fits fine. The lip around the edge of the screen sometimes makes the gestures a little more difficult but I think I've adapted now.
kc6wke said:
Tough Armor is here
Click to expand...
Click to collapse
I would love to get the Tough Armor but that plastic stand seems iffy to me. I've seen reviews of the case and it looks a little flimsy and like it might break. If the back of the case was completely solid without it, it would be my go to no questions asked. For now I picked up a Caseology Parallax which is set to arrive on Monday (my phone was just delivered today) to see if I like it or if I want to switch over to the Spigen Rugged Armor.