Related
HI all,
I have made a short how-to video on how to flash one of the many awesome roms (made by our awesome rom-makers) onto a device that doesn't have a power button. I have done it several times and as the question keeps getting raised, I thought I would show some proof.
Some advice before the video.
DO THIS AT YOUR OWN RISK!!! I'M NOT RESPONSIBLE FOR ANY DAMAGED OR FRIED PDAs
I have done this myself on an I-mate (Himalaya). It took some trial and error but I am now running WM6.1. In my case though, I had to completely remove the power button from the device. The previous owner dropped it on its head, and I got it for free, unfortunately most of the top is missing, including the power button.
SO, on to how I did it. I took a paper clip (metal) and put it about 1cm down, slightly to the right of where the power button used to connect to the motherboard (in line with the text section of the Contact button on the top left of your XDA). Make sure you have turned your XDA/IMATE on before doing this. You'll find that when you find the right area, your device will turn off, or the screen will go dark (like holding the power button for a second or giving it a quick tap) or it will flash on and off.
If you manage to hold it there for the right period of time, while pressing the other bootloader buttons, then you will be able to enter bootloader.
This took me close to an hour to get just right, on both occasions I have done it, but it eventually worked and you eventually get quicker (5 minutes for me now).
My IMATE was useless without me updating the rom, so I had no worry about frying it if I did something wrong, that is why I was OK with playing around with its insides. BEWARE that you MAY DO DAMAGE to the device.
Good luck.
Here is the video.
http://www.youtube.com/watch?v=oWfcpC1VM5g
Cheers! Hope this helps some people out there get the most out of their Himalayas again.
JADEL
Wow!
I have seen the video but somhow I felt that whatever you wanted to show is not getting properly visible. Perhaps the illumination is not that much.
But, I ould very well see the c_shekhar's bootsplash screen. hehe
Thanks for the Video. Worked a treat! Now I can flash my XDA again. Yeah the video was a little dark but I got the jist of it anyway.
Glad it has helped someone other than me. Someone also left a comment on the YouTube page that it worked for them as well, which is also good. Our Himalaya's will live on for many years to come!!!
I agree with my video being too dark (Environmentally friendly fluorescent lights are good for environment, bad for how-to videos). I will try and make a new, lighter video next time C_Shekhar ports a new rom!
Power button
I'm from the philippines. I was able to have my XDAII power button repaired it didn't cost that much. If there are repair shops in your area, maybe you can ask about it.
chinister said:
I'm from the philippines. I was able to have my XDAII power button repaired it didn't cost that much. If there are repair shops in your area, maybe you can ask about it.
Click to expand...
Click to collapse
There are only two companies in Australia I know of that can officially fix our XDAs. They are bot hin Rockhampton (about 20 hours from where I live in Sydney).
They are both owned by the same company.
As you can imagine, I would predict that the repair cost would be very high, considering they essentially have a monopoly on the situation, and postage costs, insurance etc
I have a qtek 2020 with the key broken (it misses completely) power. can I perform your procedure?
Thanks
Catalogna
Hi there,
It is hard to say for sure. The only way to know for sure is to actually try it. This procedure has worked repeatedly (at least nine times now for me) on my Himalaya, and several other peoples. It really is a last resort though, so you may want to trry everything else you possibly can first.
Cheers.
good good good
I have put the qtek in bootloader and I now have the new rom. Thanks.
I have solo another problem: after few second what I don't use it the display goes to standby and I must press strong to reactivate it. is it a problem software or hardware?
Glad to hear you were able to flash the new rom.
As for the restarting, I have not seen that before under this ROM, and I have used it on several devices and tested it fairly thoroughly. Are you sure nothing is still stuck in the top of your phone where the power button was (IE you didn't leave the metal device in the top?) Perhaps something in there keeps shorting it out?
Maybe it is just on a short timeout. Check under Start>Settings>System>Power>Advanced
See what time the settings are set to under here for "Turn off device if not used for..." both on battery and external power.
Also, then click on the "backlight" button at the bottom, and check those settings.
Under "Backlight" click on "Battery power" and change the settings to what you want, then click on "External Power" and do the same again.
Then just hit the OK button (top right corner) twice, and you should be done.
Hope this helps.
Thanks!
Hi Jadel. I just want to say thanks! Your video help me deal with a broken power button when upgrading rom for the first time. Without your help, I would never feel like having a brand new phone for free
I also found a way to hard reset a phone without camera button (or record).
Just connect mtty via usb into bootloader, type:
password BOOTLOADER
task 28 0 0
and reset your device as normal.
In my try it corrupted my splash screen but anything other is okay
ROMS
Why on the HD2 do they make roms for SPL 1.4 when every FREAKIN PERSON on the PLANET has version 2.08 I have NO IDEA! STUPID!
Flashing rom
hi im from india and im using an imate ultimate 8502 mobile and unfortunately when i was soft resetting ma phone my phone was corrupt and it mholds in the boot screen itself whenever i restart my phone it stays in the blue sreen stating i mate it doesnt moves from it and boot loader cant be opened ive tried both the ways like holding power button & volume - key as well as holding fn and red button and reset key even both doesnt respond ive given my ,mobile to service to all of the servise centers in chennai but none of them cant service it can anyone help me out plzzzzzzzzzzzz...........
THANKS!
I have my lumia 800 for a week, and now its happening something strange.. When i'm in a call for some time, and i want to end it the phone doesn't let me. Its still responsive, i can go to the start screen, etc.. but the phone call remains on top with the message "ENDING". After a couple of minutes the phone freezs completely and reboot.
Someone had the same problem??
It's not happening always, but it's frustrating... I was having such a pleasant use and then this happens.. and i'm becoming a little sad and worried.
I dont's know if its a problem of hardware, it seems software because doesn't occur always.
Thoughts?
Diofil said:
I have my lumia 800 for a week, and now its happening something strange.. When i'm in a call for some time, and i want to end it the phone doesn't let me. Its still responsive, i can go to the start screen, etc.. but the phone call remains on top with the message "ENDING". After a couple of minutes the phone freezs completely and reboot.
Someone had the same problem??
It's not happening always, but it's frustrating... I was having such a pleasant use and then this happens.. and i'm becoming a little sad and worried.
I dont's know if its a problem of hardware, it seems software because doesn't occur always.
Thoughts?
Click to expand...
Click to collapse
Yes, I also had some similar kind of problems today, i could not answer the call, after they called me about 5 times i could, but then could only speak a few words before the call stopped. Also i saw the call was still running after the caller had hung up. I wanted to retart the phone, but it would not start up again, then i took it loose from the charger , and it beeped and after a while it started up again by itself.After that it worked oke again.
I think they have to look seriously at the software, there is something wrong here i believe.
I've also had this problem of calls not ending on occasion. It seems inconsistent so far though. I'd be interested to hear if this seems to be affecting everyone or if it's only a small number of handsets.
I have the same prb. The screen goes blank and cant end calls. Has to force restart
Fhame Rashid said:
I have the same prb. The screen goes blank and cant end calls. Has to force restart
Click to expand...
Click to collapse
Exact same problem here.
halfnelson117 said:
Exact same problem here.
Click to expand...
Click to collapse
For all WP7 devices the screen automatically goes blank when you are on a call and the proximity / light sensor detects your head up to the phone. However, if the screen stays off when you move your head away from the phone it means your proximity sensor (or software related to it) is faulty as it still thinks you have the phone to your head.
This happened to my HD7 after a nasty drop on a tiled floor the other day; the sensor was dislodged and permanently was set to the "on" position. I could only end a call by pulling out the battery, unless the other party hung up first. And every time my alarm went off in the morning the screen would remain dark and I would have to press the power button to get at the snooze button (this is because the sensor is telling WP7 that the phone is in a pocket or somesuch, and not to turn on the screen as the alarm could be accidently disabled or snoozed).
I fixed it by dismantling the HD7, resettling the sensors and blowing out as much dust as I could. Has been working fine since! I wouldn't recommend doing the same for your Lumia 800 though...
I dont think it is a proximity sensor issue. In doing tests, the sensor works perfectly for calls if I only have the screen off for a short period of time. If I hold the device up to my face for say 30 seconds, then the device usually freezes up and the screen goes blank, not allowing me to end a call. This makes me believe that it is a software issue that, hopefully, nokia can sort out.
Well i have been quiet on this topic as i wanted to see if the update fixed this problem BUT NO.
Today i made a call and it didnt ring but said connected i then pressed end and nothing it didnt respond infact none of the keys did anything my lumia just froze.
I couldnt even turn it off so i took the sim out and nothing still conected i just had a phone that was frozen with no way out .. so i had a usless lumia all day at work untill the battery died..I HAD NO PHONE ALL DAY !!!
I just hope it was not connected properly or my bill will be huge from t-mobile ..
This has happened a few times befor the update and always always when the signal is quite low it seems ..
But its a joke when im stuck with a usless phone all day ..
NOKIA SORT THIS OUT ITS NOT ACCEPTABLE
Hopefully this is a software issue and we haven't all received a bad batch of lumias with wonky proximity sensors.
Is there absolutely no way of reseting / rebooting the Lumia? you just have to wait for the battery to die??! That seems ludicrous!
i face the same problem many time i reset the phone by pressing power key long.
i find if i was in 3G network this problem some times happen ,so i switch off 3G and now it more than 3 days it never happen
Well to answer that question ...no its happened nine times last week, 3 of those 9 the phone is usless and you have to wait for the battery to die..maybe that's why Nokia gave us a short battery life haha, the other 6 times after about 7 min you can turn it off to reboot and the rest of the phone is responsive .. So 30% of the time when it happens U have no phone :[ even a long press of the power button does nothing
Same problem here... You can restart the phone btw: Hold power button for 10 sec, then release the power button and press it again...
This is a big problem for me, hope a fix comes in fast...
Thanks,
Samo
Im having the same issues here. Other than this its a great phone. Hopefully get it sorted soon.
same problem here, although never had to wait for battery to die.
long hold of power (10sec+) usually reboots the phone.
I keep noticing the problem when changing locations (inside/outside buildings) which is usually connected to switching to 3g - if it happens during a call I am unable to end it with screen being responsive and phone saying that it is ending call (for 30 seconds and more)
contacted Nokia regarding this problem.. they told me to reset my handset.. this is the only option they have... DUMB
same problem here... did someone find any solution?
nopes........
wheresmybeaver said:
Is there absolutely no way of reseting / rebooting the Lumia? you just have to wait for the battery to die??! That seems ludicrous!
Click to expand...
Click to collapse
You can hold the power button for 10 seconds, this will trigger a reboot.
I'm relatively often facing the same issues, worth noting is that it does seem to connect the call as I have had customers tell me they heard me grumbling before the call got disconnected (so I gotta be more careful with grumbling )
Happened to me last night, just turned the phone off (power for a few secs then slide down) and on again.
Hi, first sorry for my english, I hope that it will be clear enough to understand my problem...
My Xperia Ray, updated to ICS, display a black screen (with backlight) when waking up after a stand by. I have to wait for undertermined time to have something on the screen, sometimes I remove the battery and boot the phone to be able to use it.
I updated it to last 4.0.4 ICS thinking it will resolve the issue, but it has not.
I can still use the phone when connected to MyPhone Explorer with the phone keypad, while the mobile's screen is black the MPE windows shows me the "normal" mobile screen. Everythings else works normally.
I'm afraid to give it to customer service, it was a SFR branded phone and I flashed it with a generic firmware.
Locked bootloader, sfr gave me unlock code for sim cards, lost my root with last upadte too.
Any help ?
Did it also occur on Gingerbread firmware?
Didn't try with GB, it happened when on ICS .562, SEUS update to .431 didn't fix the problem.
I have the same problem with my Xperia Ray.
It already happened on GB and now also on ICS.
The screen stays black if you try to wake it up after standby (doesn't matter if power button or home button ).
This happens around 80% of the time.
The only things that help are: Waiting a few minutes, taking out the battery, or hitting the power button like crazy and eventually the screen will show up again after around 10 times on and off.
I brought my phone to the service center of the shop 3 times and every time they tell me they won't repair or switch it because the hardware looked fine in their opinion (they don't switch it on there, the one time I showed them the switched on phone with the error, they told me they could see the problem but as long as nothing inside is broken 'it's not their problem' . I told my lawyer and now he is trying to get me a replace phone.
The problem even comes right after you factory reset so I don't think it's an app.
It happens without the sd card in.
I had an different homescreen launcher installed around the time it first happened, but I removed it and it still happened and I factory reseted and it still happened. So I think it has nothing to do with that?
I tried software repair with the SE Update Service and it told me everything was alright.
Does someone around here have an idea what could be the cause?
I brought it to SFR customer service (here in france) 2 time, the 2 time they just downgrade it to GB, diagnostic was "update problem". They didn't take in consideration what I told them.
One of the shop employee told me that the third time normally they have to replace it by another one. If they don't want to change it I think I'll mess up their shop...
This even happens on Xperia Mini
when ever i try to wake it up by pressing Home button or Power button
it takes about 3-5 seconds to wakeup
it should be instant isn't it?
I also experienced 2 times that even pressing
all the buttons doesn't wakes up the screen
but only back light, then i have to restart the
phone by removing the battery.:crying:
Me too !
I have tha same problem !! I can't take it esay..It's bad thing in my Idea! very disgusting :crying:
I've got the same delays on my Lww, sometimes my phone doesn't wake up at all, and sometimes it takes several seconds. I haven't found any solution for it, but it seems to be a Sony-specific problem.
Sent from my Transformer Pad TF300T using xda app-developers app
I have also the same problem from some days
tried to reset all with flashtool with no luck
the problem is also during kernel loading,tried different kernel,logo and cw doesn't appear 90%times
if someone is able to read in logcat file I have attached one here
thanks for any help
me also
i also have the same problem with my xperia x10
bad news for all of us.....
http://youtu.be/m4p0-kv1cxA"
I took mine off silent and its working perfectly again. I'd try that!
HPJun said:
I took mine off silent and its working perfectly again. I'd try that!
Click to expand...
Click to collapse
sorry but I haven't understood....my language isn't english
Can you explain better please?
guerrierodipace said:
sorry but I haven't understood....my language isn't english
Can you explain better please?
Click to expand...
Click to collapse
I turned the sound for messages and phone calls back on. On 'silent' the phone just vibrated.
It hasnt fixed the problem of the black screen completely, but it is happening a lot less for me.
Finally I brought my Xperia Ray to the shop where I got it for the third time.
I bought it 159 Euros in december 2011 (plus Sony gave me 50E back) and they refunded 270 Euro in november 2012 !
Not exactly a refund because I had to choose another mobile, so I took the Xperia T which was 430euro, so I had to pay 160 E for the XT.
Good deal for replacement of a one year old mobile ! Only problem is that I can't unlock the BL.
It is a strange hardware problem since the screen can eventually be turned back on, so maybe it is something in the firmware that is screwed up and doesn't get completely fixed by SUS. If I were you guys I would try this fix: http://forum.xda-developers.com/showthread.php?t=1492805
It may not work, but it is better than throwing your Ray in the trash.
I have the same problem. My phone (xperia ray) after standby or after reboot has black screen with backlight. At first waiting for couple of seconds and trying to wakelock would solve the problem, after few weeks to wake up my phone I needed it to reboot (pulling out the battery). Now I need few reboots to start the device with screen on.
I found workarounds like Llama combined with Nightclock (both from Google Play) for the screen never goes off, but this eats battery and also sometimes the screen would go off. I don't believe its a hardware problem because with this workaround the phone is usable few days (until Llama delay the "events").
Found a way to make a logcat from starting the device. Two are for unsuccessful startups (black screen with backlight) and one for successful (screen on).
I think the problem is in the kernel for not loading drivers, but someone who knows to read logcat will tell us/me for sure. I can't flash new kernel because the phone is with Bootloader locked (Bootloader unlock allowed: NO).
Kernel version is 2.6.32.9-perf
Stock Rom 4.1.B.0.587
rooted
PS. Sorry for my english its not my native language.
Just to add one or two more informations: even with black screen and backlight the phone is usable, like I can answer on calls, it vibrates when I slide to unlock... I also thought the problem is in proximity sensor, but if it was that case the touchscreen would be locked.
If you fully discharge the battery and after switch on,it start normally?
guerrierodipace said:
If you fully discharge the battery and after switch on,it start normally?
Click to expand...
Click to collapse
I never tried full discharge of battery. I will try that and post the result.
HI All,
Had my bip for 2 weeks, all working fine until now. Major issue in that the brightness doesn’t adjust when I amend the settings and the backlight (i.e. lift wrist) function doesn’t work, the screen doesn’t light up at all, ever, even when I press the button or flick through the screen menus. Over the 2 weeks I’ve worn it constantly, washed dishes a few times otherwise just your usual day-to-day activities. Everything works apart from this which is a major issue as means the watch is only useful during the day, in dark can’t make anything out.
Can anyone help please?
holidayinning said:
HI All,
Had my bip for 2 weeks, all working fine until now. Major issue in that the brightness doesn’t adjust when I amend the settings and the backlight (i.e. lift wrist) function doesn’t work, the screen doesn’t light up at all, ever, even when I press the button or flick through the screen menus. Over the 2 weeks I’ve worn it constantly, washed dishes a few times otherwise just your usual day-to-day activities. Everything works apart from this which is a major issue as means the watch is only useful during the day, in dark can’t make anything out.
Can anyone help please?
Click to expand...
Click to collapse
Is there anything I can try to test the backlight? Whether it is the light itself or some function I may have disabled?
Can I somehow reinstall an OS on the watch itself?
I don't have any warranty or options to return as bought from someone who no longer wanted it (open box but otherwise new).
Hi,
I've got the same issue. After contacting Amazfit support, they say that my product may have a default. So I have to contact Gearbest to have another unit
Do you have any new information ?
Unfortunately not, I did contact amazfit support who told me to video the issue and send it in. I haven't had a chance and as I have no option to return, the watch is just basically gathering dust. When it worked, it worked really well but for the £ I might just purchase a mi band instead.
this seems to be caused by non official faces. put an official face back on and it works.
That didnt work for me either, tried rebooting/restoring to default, different apps on the mobile, as someone not too techy feel like exhausted all options and left disappointed the screen does not increase/decrease brightness never mind illuminate the backlight. Thanks though!
Looks like a recent issue
I got my watch already for a while. Never had any issues until now. Backlight is done after swimming. All the rest still works. Factory reset didn’t work. Adjusting brightness to its maximum neither. So anyone experience with the after sale service?
I’ve bought my watch with gearbest and am trying to send them a technical ticket
my amazfit bip backlight is not working now as well help please!
Has anyone else faced with the issue of display not working properly in K20 Pro?
I started facing few problems from day 1, though the problems were minor like
.
[Problem 1] When using the phone with dark mode on or with absolute black background with 0-25% brightness the screen didnt respond well to on screen movements. Like when scrolling, the items on the screen produced a blue shadow on black backgrounds.
I thought this was due to Xiaomi's usage of cheap & low quality Super Amoled displays. Im not sure if it is as i thought it is or due to some other reasons.
[Problem 2] after 25-27 days of usage the ambient disolay started to switch of automatically after a few seconds of locking the screen. And when i tries to unlock the screen by fingerprint, te scanner didnt work. I had to push the lock button and then the screen switched on after 4-5 seconds of pressing the button(i was pressing the button only once and not holding it).
I still dont know why did this happen (I'll update soon)
[Problem 3] after 2-3 days of the problem 2 one fine morning my screen went dark.... Like completely blank, although i tried switching on and off multiple times but the screen didnt show a single hope to turn on.
So i took iit to the service centre and found out that there were many people with the same problem. Most of them being the first launch sale buyers(including me).
SERVICE CRNTRE told me that there was instructions from the comoany(Xiaomi) to collect all the Faulty screen K20 Pro's and provide a new sealed box within 1 week. Providing that there are no signs of external damage to the handset. Peoole will have to suubmit the box and its contents with the phone.
So Yaaay! For that but Naaay! For xiaomi for producing soo many faulty handsets out of the factory.
I'm writing this post as there are no posts regarding this issue on the internet and i was shocked when my phone went dark.
i’m facing problem 1 too
but no touch issue or burning for me
mine is China 6/128gb variant
1st batch