Hi all,
I'm starting to lose hope to get that thing working, despite following many tutorial, so I'm seeking a little help.
I got a Huawei P20 Lite because of battery issue that I fixed because it's a good training for me.
I fixed the battery and I also took the opportunity to Unlock it with the 2 pins and the PotatoNV tool. That part worked great and I'm now Phone and FRP Unlocked but them it went a little downhill and I may have soft-bricked it.
I'm used to Xiaomi phone where it's easy: unlock the bootloader, flash TWRP or OrangeFox, flash ROM, wipe thing and enjoy.
But here, I had to learn to flash a recovery_ramdisk and boot into it. The issue I had with TWRP is I can't seem to "format" Data, the partition is in F2FS and it stay stuck at "Done". So I tried multi tutorial, multi recovery version (TWRP and "stock") and multiple ROM with always issue to the point that now, it stay stuck at the TWRP logo or stuck at the warning when using the stock e-recovery.
I'm trying to understand the exact process to get it to work because following the Lineage tutorial, I get stuck at the wiping of Data and trying to find the right recovery and ROM so I not only can get the phone working but also be able to do update if it's possible on this phone.
I try to reuse the phone instead of putting it in recycle.
Thank for your help!
Hockpold said:
I'm trying to understand the exact process
Click to expand...
Click to collapse
https://forum.xda-developers.com/t/losq-lir-lineageos-17-1-18-1-unofficial-gsi.4219291/post-84305543
-Alf- said:
https://forum.xda-developers.com/t/losq-lir-lineageos-17-1-18-1-unofficial-gsi.4219291/post-84305543
Click to expand...
Click to collapse
It stay stuck at the warning when using the eRecovery, so while I can send it, I can't Wipe Data/Factory Reset and through TWRP it also get stuck.
Hockpold said:
It stay stuck at the warning when using the eRecovery, so while I can send it, I can't Wipe Data/Factory Reset and through TWRP it also get stuck.
Click to expand...
Click to collapse
I don't know what the problem is, it works for me and you are the first one to have this problem.
Btw, it's not an eRecovery, it's Recovery .
Follow instructions in OP and use stock Recovery EMUI 9.1.
-Alf- said:
I don't know what the problem is, it works for me and you are the first one to have this problem.
Btw, it's not an eRecovery, it's Recovery .
Follow instructions in OP and use stock Recovery EMUI 9.1.
Click to expand...
Click to collapse
Where can I find the stock recovery? The other post it's either TWRP or the eRecovery.
Hockpold said:
Where can I find the stock recovery? The other post it's either TWRP or the eRecovery.
Click to expand...
Click to collapse
Are you sure?
-Alf- said:
To remove Magisk reinstall stock recovery_ramdisk via TWRP or fastboot , download Here
Click to expand...
Click to collapse
-Alf- said:
Are you sure?
Click to expand...
Click to collapse
Yeah, this one stay stuck at the yellow warning. I still have access to fastboot without issue.
Hockpold said:
Yeah, this one stay stuck at the yellow warning. I still have access to fastboot without issue.
Click to expand...
Click to collapse
In fastboot mode run commands:
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
and post the results .
-Alf- said:
In fastboot mode run commands:
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
and post the results .
Click to expand...
Click to collapse
Alright, here:
* get-build-number:
ANE-LX1 9.1.0.373(C109E7R1P3)
* get-product-model
ANE-LX1
* vendorcountry
orange/all
*oeminforead-CUSTOM_VERSION
ANE-LX1-CUST 9.1.0.7(C109)
*oeminforead-SYSTEM_VERSION
ANE-LX1 8.0.0.155(C109)
You might wanna take a look at my guide.
[GUIDE] [EMUI9] P20 Lite Basics
Special key combos: Power + Vol+ = Recovery Mode While USB connected, Power + Vol+ = Erecovery Mode While USB connected, Vol- = Fastboot Plug USB while holding down Vol+ + Vol- = Download Mode Power + Vol+ + Vol- = Force Dload Flashing Any GSI...
forum.xda-developers.com
Alright, seem like it worked.
I still have the issue that made me into this mess where I can't connect to a password protected Wi-Fi network (and the option to force to stay connected doesn't seem on CAOS unlike Lineage) but at least the rest is working, thank you.
Hockpold said:
I can't connect to a password protected Wi-Fi network
Click to expand...
Click to collapse
It should work with stock Kernel...
-Alf- said:
It should work with stock Kernel...
Click to expand...
Click to collapse
Does https://forum.xda-developers.com/t/kernel-emui-9-p20-lite-phenix-kernel.4241503/ should also work or only the stock one?
Hockpold said:
Does https://forum.xda-developers.com/t/kernel-emui-9-p20-lite-phenix-kernel.4241503/ should also work or only the stock one?
Click to expand...
Click to collapse
Yes, if you started from
TureX said:
Emui version < 9.1.0.300
Click to expand...
Click to collapse
-Alf- said:
Yes, if you started from
Click to expand...
Click to collapse
Alright, so just a fastboot flash kernel phenix.img or should I also do a factory reset (or reflash something else after)?
-Alf- said:
Yes, if you started from
Click to expand...
Click to collapse
HI!
This wifi problem has been fixed, I will release an img as soon as possible.
Cheers
Hockpold said:
Alright, so just a fastboot flash kernel phenix.img or should I also do a factory reset (or reflash something else after)?
Click to expand...
Click to collapse
if you have TWRP installed select Wipe > Advanced wipe > Dalvik/ART Cache, nothing else.
TureX said:
HI!
This wifi problem has been fixed, I will release an img as soon as possible.
Cheers
Click to expand...
Click to collapse
Oh!
That's very nice to hear, I'll be finally able to give a new life to this phone.
Related
On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable OEM unlocking.
unlock bootloader and flash twrp
Code:
fastboot oem nubia_unlock NUBIA_NX609J
Code:
fastboot flash recovery recovery.img
download
https://drive.google.com/open?id=1VzUS999ZS_yc6GtcKngA6GrlTpOZp2P5
Sources
https://github.com/youyim123/android_device_nubia_nx609j
Came up in Chinese, but everything is working after changing the language setting over. Thanks.
Hi friends, if I would like return to Stock Recovery, ¿Where I find stock recovery and How flash?
Thanks for this work
Hi, someone can help me? Thnaks
sakilxda said:
Hi, someone can help me? Thnaks
Click to expand...
Click to collapse
Finally I resolved this problem. I found other Recovery.img working
sakilxda said:
Hi friends, if I would like return to Stock Recovery, ¿Where I find stock recovery and How flash?
Thanks for this work
Click to expand...
Click to collapse
Ok, I´m resolved this.
If you need install Stock Recovery you need download a Oficial Stock firmware "Zip" and extract the Stock recovery to the this "Zip" file, and you repeat this metod with Stock Recovery
Am I the only one having problems with fastboot on Windows 10?
sakilxda said:
Hi, someone can help me? Thnaks
Click to expand...
Click to collapse
bro i need fastboot drivers please
in mi system dont hace driver and y my devices onlye hace android =( help me me has win10
Sorry, long time ago tha I haven´t visited XDA.
I have used the drivers of video´s link but i had to test many drivers. It was very dificult for my too.
Actually I don´t know wich was the drives that i used, sorry.
if you have once used some fastboot drivers for some device on windows 10, chances are most probably you will have issues with detecting other devices in fastboot mode . Either boot with linux or reinstall windows 10 is the only solution imho
sakilxda said:
Finally I resolved this problem. I found other Recovery.img working
Click to expand...
Click to collapse
Please provide this working twrp which solved this problem..as i am also facing the same issue
munmun said:
Please provide this working twrp which solved this problem..as i am also facing the same issue
Click to expand...
Click to collapse
Hello, have you visited my video link? There, there is different links in the description that you can find the recovery I used. It's long time ago and maybe is actualliced now.
sakilxda said:
Hello, have you visited my video link? There, there is different links in the description that you can find the recovery I used. It's long time ago and maybe is actualliced now.
Click to expand...
Click to collapse
When i try to reboot in twrp it boots into recovery for 2-3 sec and then again reboots to system
munmun said:
When i try to reboot in twrp it boots into recovery for 2-3 sec and then again reboots to system
Click to expand...
Click to collapse
Maybe your Recovery isn't good.
Try flash one more time or another recovery
Same issue I m face. When I flash twrp then go to recovery mode. Then they off and start with stock revery. And mobile repat lock bootloader
---------- Post added at 05:03 PM ---------- Previous post was at 05:01 PM ----------
I m try all official twrp. But face same issue
sakilxda said:
Maybe your Recovery isn't good.
Try flash one more time or another recovery
Click to expand...
Click to collapse
I have tried multiple..but unable to boot into recovery...it would be very helpful of you if you could provide that recovery that worked on your phone.
As i am also unable to boot into recovery with command "fastboot boot recovery.img"
munmun said:
I have tried multiple..but unable to boot into recovery...it would be very helpful of you if you could provide that recovery that worked on your phone.
As i am also unable to boot into recovery with command "fastboot boot recovery.img"
Click to expand...
Click to collapse
Sorry but this was long ago and I can't remember.
munmun said:
I have tried multiple..but unable to boot into recovery...it would be very helpful of you if you could provide that recovery that worked on your phone.
As i am also unable to boot into recovery with command "fastboot boot recovery.img"
Click to expand...
Click to collapse
Try this one: http://www.mediafire.com/file/45qwt6i4ccdnjd0/recovery.img/file
you need first to unlock bootloader (you need to be in bootmode):
fastboot oem nubia_unlock NUBIA_NX609J
Just after that you can flash recovery.img:
fastboot flash recovery recovery.img
After this you can go back to recovery from boot menu navigating with up/down key and confirm with Power button!
:fingers-crossed:
ABM30 said:
Try this one: http://www.mediafire.com/file/45qwt6i4ccdnjd0/recovery.img/file
you need first to unlock bootloader (you need to be in bootmode):
fastboot oem nubia_unlock NUBIA_NX609J
Just after that you can flash recovery.img:
fastboot flash recovery recovery.img
After this you can go back to recovery from boot menu navigating with up/down key and confirm with Power button!
:fingers-crossed:
Click to expand...
Click to collapse
I have tried this as well but twrp boots up for a 2-3 sec & then phobe reboots to system again..
With fastboot boot recovery.img, same results are seen
munmun said:
I have tried this as well but twrp boots up for a 2-3 sec & then phobe reboots to system again..
With fastboot boot recovery.img, same results are seen
Click to expand...
Click to collapse
which ROM do you have installed?
There is a chance to need to flash an original recovery (you can find it in original 8.1 ROM from Nubia), than boot in recovery and erase cache and data (IT WILL ERASE ALSO INTERNAL MEMORY!...SO BACK UP) and than unlcok bootloader, flash TWRP, flash ROM, flash bluespark boot.img
Hi All,
I've been crawling the web the past few days to find a solution to my problem and unfortunately I didn't...
I have a Asus Zenfone 3 Max ZC520TL MT6737M, I never did a custom OS installation before and didn't know anything about how phone works except the Linux kernel
After 2 or 3 weeks playing with custom rom and recovery, softbrick, fastboot and adb I finally successfully intalled a custom OS, I wanted lineageOS but only found an Himax image working properly (with bluetooth., etc) for my phone and TWRP as custom recovery.
I setted my parameters for all my applications and after inserting my SIM card the network was not working, I tried a factory reset from the phone and then I got stuck in twrp however the way I booted, I tried flashing the os again, the recovery again wiping/formatting data, I was still stuck in TWRP
Then I executed :
fastboot format:ext4 cache
fastboot format:ext4 boot
And now I can't boot nor in twrp nor in fastboot, I can't access the bootloader using power and volume up, and my phone bootloop
Is there a way to get to fastboot to reinstall the recovery and then from here the os or is my phone hardbricked with no future, ready for trash?
Thank you
rominail said:
then I executed :
fastboot format:ext4 boot
Click to expand...
Click to collapse
You completely destroyed phone's boot-loader, what is comparable to a computer's BIOS.
What do you expect? IMO phone is case for the e-waste.
rominail said:
Hi All,
I've been crawling the web the past few days to find a solution to my problem and unfortunately I didn't...
I have a Asus Zenfone 3 Max ZC520TL MT6737M, I never did a custom OS installation before and didn't know anything about how phone works except the Linux kernel
After 2 or 3 weeks playing with custom rom and recovery, softbrick, fastboot and adb I finally successfully intalled a custom OS, I wanted lineageOS but only found an Himax image working properly (with bluetooth., etc) for my phone and TWRP as custom recovery.
I setted my parameters for all my applications and after inserting my SIM card the network was not working, I tried a factory reset from the phone and then I got stuck in twrp however the way I booted, I tried flashing the os again, the recovery again wiping/formatting data, I was still stuck in TWRP
Then I executed :
fastboot format:ext4 cache
fastboot format:ext4 boot
And now I can't boot nor in twrp nor in fastboot, I can't access the bootloader using power and volume up, and my phone bootloop
Is there a way to get to fastboot to reinstall the recovery and then from here the os or is my phone hardbricked with no future, ready for trash?
Thank you
Click to expand...
Click to collapse
You NEVER format your boot partition as ext4 it's a raw boot.img which holds the kernel and ramdisk. You should really do research and follow instructions alittle better than that.. unfortunately I don't think your device can be saved and if you flashed aboot or sbl1/2/3 then your SOL
Thanks
Thank you for your answers!
I don't know why I did that (sometimes I have crazy bad ideas), I didn't see that on internet
rominail said:
Thank you for your answers!
I don't know why I did that (sometimes I have crazy bad ideas), I didn't see that on internet
Click to expand...
Click to collapse
That's okay! Please so make sure you do some research if your new to the custom OS scene.. it's always good to learn new things
maybe you can flash again like from the factory by using the default flashing and ROM tools.
BryanHafidz said:
maybe you can flash again like from the factory by using the default flashing and ROM tools.
Click to expand...
Click to collapse
If your in a Qualcomm chipset and you have an EDL programmer that works for your device I have custom tools in my cloud storage to create an EDL firmware if you don't ready have one. If your on MTK then there is Sugar MTK or SP flash tool that can work. If your an another one you may be out of luck as it seems nobody has been able to restore those chipsets
EDIT: I do have a whole zip file of programmers and one that I use for my LG Zone 2 (msm8x10.mbn)
TheExploitedOne said:
You NEVER format your boot partition as ext4 it's a raw boot.img which holds the kernel and ramdisk. You should really do research and follow instructions alittle better than that.. unfortunately I don't think your device can be saved and if you flashed aboot or sbl1/2/3 then your SOL
Click to expand...
Click to collapse
we have the same problem but I didn't do like you.
I entered these commands
*fastboot flash recovery boot.img (I'm stupid lol)
*fastboot flash boot boot.img
*fastboot reboot*
mahirab23 said:
we have the same problem but I didn't do like you.
I entered these commands
*fastboot flash recovery boot.img (I'm stupid lol)
*fastboot flash boot boot.img
*fastboot reboot*
Click to expand...
Click to collapse
What seems to be going on after the flash?
TheExploitedOne said:
What seems to be going on after the flash?
Click to expand...
Click to collapse
the biggest problem is i have reset the phone and i am stuck with this message: "to start android enter your password". I entered the correct password but another message appears with a reset phone option.
Since the recovery.img file is no longer in the system, the phone keeps making this loop.
mahirab23 said:
the biggest problem is i have reset the phone and i am stuck with this message: "to start android enter your password". I entered the correct password but another message appears with a reset phone option.
Since the recovery.img file is no longer in the system, the phone keeps making this loop.
Click to expand...
Click to collapse
If you can get into fastboot run the following:
fastboot erase recovery
fastboot erase userdata
fastboot format:ext4 userdata
Then reflash your recovery
TheExploitedOne said:
If you can get into fastboot run the following:
fastboot erase recovery
fastboot erase userdata
fastboot format:ext4 userdata
Then reflash your recovery
Click to expand...
Click to collapse
I can't get into fastboot.
another solution?????
mahirab23 said:
I can't get into fastboot.
another solution?????
Click to expand...
Click to collapse
Can you access EDL mode?
TheExploitedOne said:
Can you access EDL mode?
Click to expand...
Click to collapse
thank you for your attention and suggestions.
I haven't tried this method yet.
I'm not good with EDL mode
Can SP tools and MiracleBox help me?
mahirab23 said:
thank you for your attention and suggestions.
I haven't tried this method yet.
I'm not good with EDL mode
Can SP tools and MiracleBox help me?
Click to expand...
Click to collapse
MiracleBox and QPST yes
TheExploitedOne said:
MiracleBox and QPST yes
Click to expand...
Click to collapse
good !!!: o: o
can you develop the method with Miracle Box and QPST ? please!!!
mahirab23 said:
good !!!: o: o
can you develop the method with Miracle Box and QPST ? please!!!
Click to expand...
Click to collapse
I have the tools needed in my cloud I can make into a zip file. You'll need to also do some research on your part but I can also write a readme file too so you have a basic understanding. Just give me a few to get the link
EDIT:
Here you go this has all you'll need for flashing your device in EDL as well as create the firmware if needed
https://mega.nz/file/rc8CVIiB#qnM3_ZzrvCJtp_M7Y9ZftZqDtGgWeN0tqFrLlT30pws
TheExploitedOne said:
MiracleBox and QPST yes
Click to expand...
Click to collapse
thank you
I finally managed to reset the phone thanks to SoftwareDownload
thank you really. you are really kind and available:bien::bien::bien:
mahirab23 said:
thank you
I finally managed to reset the phone thanks to SoftwareDownload
thank you really. you are really kind and available:bien::bien::bien:
Click to expand...
Click to collapse
Absolutely good sir! I'm glad that I can help
TheExploitedOne said:
If your in a Qualcomm chipset and you have an EDL programmer that works for your device I have custom tools in my cloud storage to create an EDL firmware if you don't ready have one. If your on MTK then there is Sugar MTK or SP flash tool that can work. If your an another one you may be out of luck as it seems nobody has been able to restore those chipsets
EDIT: I do have a whole zip file of programmers and one that I use for my LG Zone 2 (msm8x10.mbn)
Click to expand...
Click to collapse
Thank you for your help, unfortunately it's a mediatek
Hi all! Recently I got Huawei p20 lite without screen. I was able to unlock the bootloader, decrypt data and even flash Lineage 16 and use it via ADB stream on my PC. But there was a problem, I can't connect to WiFi networks (even that I can see them). So after some reading I conclude that the problem is my EMUI version - ANE-LX1 9.1.0.368. So I downgrade to EMUI 8 but now I can't get adb access when OS is loaded. I have access only from recovery. On Lineage was easy. Just 3 rows to build.prop and default.prop but that's not the case for stock rom. Does anyone knows what files should be edited and how? Maybe someone with stock rom and root can share there files? I'll be very thankful if someone help.
I have success using custom kernel and editing build.prop and default.prop from recovery. Now the question is what will be easiest way to upgrade do miui 9 and still can connect to WIFI networks.
Bladyle said:
I have success using custom kernel and editing build.prop and default.prop from recovery. Now the question is what will be easiest way to upgrade do miui 9 and still can connect to WIFI networks.
Click to expand...
Click to collapse
Imo there's no way to not overwrite build.prop etc. when upgrading. And among other things, some partitions are changed on EMUI 9.1.
The question was if I make upgrade via system menu does the USB debugging and data decrypt will stay but I guess no.
I'm thinking to upgrade via HURUpdater to ANE-LX1 9.1.0.278 (do this version have wifi drivers problem?) and then decrypt data and flash some GSI rom - I don't think I will have success with booting stock. The one thing that is bothering me is that all tutorial lead to do factory reset after flashing the rom via stock recovery. And in EMUI 8 was easy because I have to press Vol - and power button 3 times but on EMUI 9 I saw you have to type "YES".
Bladyle said:
The question was if I make upgrade via system menu does the USB debugging and data decrypt will stay
Click to expand...
Click to collapse
I know what the question was and I answered it, maybe in other words.
Bladyle said:
upgrade via HURUpdater to ANE-LX1 9.1.0.278
Click to expand...
Click to collapse
And how do you want to do it?
Bladyle said:
and then decrypt data and flash some GSI rom
Click to expand...
Click to collapse
GSI does not require data decrypt
Bladyle said:
all tutorial lead to do factory reset after flashing the rom via stock recovery.
Click to expand...
Click to collapse
not necessary if you use TWRP
Bladyle said:
And in EMUI 8 was easy because I have to press Vol - and power button 3 times
Click to expand...
Click to collapse
Really an interesting method ...
Bladyle said:
upgrade via HURUpdater to ANE-LX1 9.1.0.278
Click to expand...
Click to collapse
And how do you want to do it?
I have found FULL OTA for this version. Do I need anything else?
-Alf- said:
GSI does not require data decrypt
Click to expand...
Click to collapse
Yes but I need it so I can push my adbkey.pub for the USB debugging
not necessary if you use TWRP
Click to expand...
Click to collapse
Can you tell me how to do stock recovery factory from TWRP via adb ?
Bladyle said:
And how do you want to do it?
I have found FULL OTA for this version. Do I need anything else?
Yes but I need it so I can push my adbkey.pub for the USB debugging
Can you tell me how to do stock recovery factory from TWRP via adb ?
Click to expand...
Click to collapse
nvm... Good luck!
-Alf- said:
nvm... Good luck!
Click to expand...
Click to collapse
Uuuhm what? What I'm doing wrong? As I said at my first post my phone has no screen and I'm trying to make it somehow usable for me . Never used Huawei device before. I think people here have more knowledge than me , that's why I'm asking. Sorry if my questions are stupid for you.
Bladyle said:
Sorry if my questions are stupid for you.
Click to expand...
Click to collapse
No, you got it wrong.
I'm trying to help you, but you don't have to respect my advice, it's your choice. I'm not an expert or a dev, I'm just a hobbyist, but I have a lot of experience with hi6250 devices.
So just from my experience:
1. As for HuRupdater look here
so I'm not sure that full-OTA will help you...
2.
-Alf- said:
not necessary if you use TWRP
Click to expand...
Click to collapse
First do advanced wipe - wipe Art/dalvik + data + system. Reboot fastboot, flash system.img (your GSI) in fastboot > fastboot reboot. That's all.
-Alf- said:
1. As for HuRupdater look here
Click to expand...
Click to collapse
Yes, I have used exact this post from you to flash ANE-LX1 8.0.0.144(C432) on my device!
The idea now is to change 3 files you have shared with the files from ANE-LX1 9.1.0.278(C432E6R1P7) FULL OTA.zip. and then flash GSI rom.
From what I have read that's how hurupdater works... I'm not sure that it will work but I can try it.
2. Thanks.
Bladyle said:
I'm not sure that it will work but I can try it.
Click to expand...
Click to collapse
And what about Service ROM and dload method?
-Alf- said:
And what about Service ROM and dload method?
Click to expand...
Click to collapse
Actually both methods didn't work.
First tried with hurupdater but got some error at the begging.
Then I extracted dload folder from a zip a put it on scard and tried to install it first via code from phone app and then with service menu (vol- vol + and power) but still ended on emui 8 just with encrypted device again... Any other methods I can try?
Bladyle said:
Actually both methods didn't work.
First tried with hurupdater but got some error at the begging.
Then I extracted dload folder from a zip a put it on scard and tried to install it first via code from phone app and then with service menu (vol- vol + and power) but still ended on emui 8 just with encrypted device again... Any other methods I can try?
Click to expand...
Click to collapse
In fastboot mode run commands:
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
and post results.
Some might fail, so don't worry about it.
Can you give me a link to that service ROM ?
Bladyle said:
but still ended on emui 8
Click to expand...
Click to collapse
begins installation and at 5% stops: software installation failed? You got an basic error message "software installation failed", or a specific error? ("Incompatible with current version", "Failed to check update package", Update package doesn't exist" etc.).
Make sure to have the stock Recovery flash
Yesterday I made more than 20 tries without success.
dload method don't work for me and I don't know what the error is there.
I have tried to extract firmware with Huawei update extractor and manually flash all the partition in fastboot. Most of them did flashed OK but some not because of wrong partition name or partition table I think.
I have success of flashing LineageOS 16 and phone boot normally but didn't detect internal storage.
I think I mixed .img files ....
Best answer for me is to use huru updater, but cant find working OTA for EMUI 9 ...
-Alf- said:
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
Click to expand...
Click to collapse
fastboot oem get-build-number
(bootloader) :ANE-LX1 9.1.0.278(C432E6R1P7)
fastboot oem get-product-model
(bootloader) ANE-LX1
fastboo getvar vendorcountry
vendorcountry: hw/eu
fastboot oem oeminforead-CUSTOM_VERSION
(bootloader) :ANE-LX1-CUST 9.1.0.6(C432)
fastboot oem oeminforead-SYSTEM_VERSION
(bootloader) :ANE-LX1 8.0.0.151(C432)
-Alf- said:
Can you give me a link to that service ROM ?
Click to expand...
Click to collapse
I think this was a the file I tried with dload method.
Huawei P20 Lite ANE-LX1 ANE-L01 hw eu HLRCF Anne-L01 9.1.0.278(C432E6R1P7T8) Firmware EMUI9.1.0 05015BJS [androidhost.ru].zip - AndroidHost.RU
Download file - Huawei P20 Lite ANE-LX1 ANE-L01 hw eu HLRCF Anne-L01 9.1.0.278(C432E6R1P7T8) Firmware EMUI9.1.0 05015BJS [androidhost.ru].zip
androidhost.ru
Bladyle said:
I'm thinking to upgrade via HURUpdater to ANE-LX1 9.1.0.278
Click to expand...
Click to collapse
Bladyle said:
fastboot oem get-build-number
(bootloader) :ANE-LX1 9.1.0.278(C432E6R1P7)
Click to expand...
Click to collapse
Bladyle said:
CUSTOM_VERSION
(bootloader) :ANE-LX1-CUST 9.1.0.6(C432)
Click to expand...
Click to collapse
??? I'm sorry, but I don't understand what you want at all ...
Bladyle said:
Best answer for me is to use huru updater, but cant find working OTA for EMUI 9
Click to expand...
Click to collapse
The safe upgrade to emui 9 can be done as follows:
- via OTA update (via system application)
- using HiSuite
- by the dload method
- paid services
No HwOTA, HuRupdater, fastboot, Huawei Multi-tool (RUFI) etc.
-Alf- said:
??? I'm sorry, but I don't understand what you want at all ...
Click to expand...
Click to collapse
I'm trying to install ANE-LX1 9.1.0.278.
I have flashed all the .img files extracted from the link in my previous post. Don't know why my custom_version is different.
Bladyle said:
I'm trying to install ANE-LX1 9.1.0.278.
Click to expand...
Click to collapse
You are trolling me, right?
-Alf- said:
You are trolling me, right?
Click to expand...
Click to collapse
Maybe
Do you have by any chanse some OTA files of emui 9 that I can use for HuRupdater?
i wanted to flash a custom ROM. to unlock bootloader with adb with adb reboot recovery the phone just reboot. developer settings enabled. OEM USB debbuging too. but there is no advanced reboot option in settings. help it's my first time doing this.
I faced the same issue after OOS 12
What i did to fix this issue was i went back to Oos 11 using msm tool and then unlocked bootloader then flash custom rom.
If it is your first time doing all this maybe you will find it difficult to use msm tool so follow a good videk guide on youtube and then try this.
HULK2275 said:
I faced the same issue after OOS 12
What i did to fix this issue was i went back to Oos 11 using msm tool and then unlocked bootloader then flash custom rom.
If it is your first time doing all this maybe you will find it difficult to use msm tool so follow a good videk guide on youtube and then try this.
Click to expand...
Click to collapse
thanks. i will try that if there is no option other than downgrading the OS
dfm000 said:
thanks. i will try that if there is no option other than downgrading the OS
Click to expand...
Click to collapse
try adb boot bootloader or adb boot fastboot, adb boot fastbootd. One of them should work. Good luck!
JackieMe said:
try adb boot bootloader or adb boot fastboot, adb boot fastbootd. One of them should work. Good luck!
Click to expand...
Click to collapse
i downgraded the OS
I cannot enter fastboot mode after the update anyone facing the same issue? Adb is fine
gohaaron said:
I cannot enter fastboot mode after the update anyone facing the same issue? Adb is fine
Click to expand...
Click to collapse
you can't on android 12
dfm000 said:
you can't on android 12
Click to expand...
Click to collapse
huh? rly? how come? i can see the fastboot logo but then it just close and continue booting... ive seen on Youtube they were able to access it... u can use key combo or adb commands
dfm000 said:
you can't on android 12
Click to expand...
Click to collapse
if we cant enter fastboot mode how do we unlock bootloader and root?
gohaaron said:
if we cant enter fastboot mode how do we unlock bootloader and root?
Click to expand...
Click to collapse
ask here https://t.me/OnePlus9ROfficial
dfm000 said:
ask here https://t.me/OnePlus9ROfficial
Click to expand...
Click to collapse
ok ive joined thanks
Hi guys,
i unlocked the bootloader of my p20lite with PotatoNV and i installed TWRP recovery.
Then i wiped alla data including internal storage. I tried to flashing some ROM (with zip file and with img file), but they don't work(it seems they aren't installed), at every reboot system smartphone shows me TWRP recovery.
I don't know what to do. Do you have any tips please?
Thank you
After attached image i show only TWRP
freddie993 said:
Hi guys,
i unlocked the bootloader of my p20lite with PotatoNV and i installed TWRP recovery.
Then i wiped alla data including internal storage. I tried to flashing some ROM (with zip file and with img file), but they don't work(it seems they aren't installed), at every reboot system smartphone shows me TWRP recovery.
I don't know what to do. Do you have any tips please?
Thank you
After attached image i show only TWRP
Click to expand...
Click to collapse
Look here
https://forum.xda-developers.com/t/i-bricked-my-p20-lite.4449545/#post-86936013
Hi tried to follow those instructions . When i hold both volume button i receive attached screen. i tried to install ROM with sideload method but nothing to do.
freddie993 said:
Hi tried to follow those instructions . When i hold both volume button i receive attached screen. i tried to install ROM with sideload method but nothing to do.
Click to expand...
Click to collapse
Hi,
in fastboot mode run commands :
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
and post the results.
Some might fail, so don't worry about it.
i can't access in fastboot mode neither from TWRP
i did it @-Alf-
freddie993 said:
i did it @-Alf-
Click to expand...
Click to collapse
does this mean problem solved?
-Alf- said:
does this mean problem solved?
Click to expand...
Click to collapse
unfortunately no , i tried to install system via fastboot but at the reboot i show TWRP....
freddie993 said:
unfortunately no , i tried to install system via fastboot but at the reboot i show TWRP....
Click to expand...
Click to collapse
In fastboot mode flash stock recovery_ramdisk, download Here
Use command fastboot flash recovery_ramdisk RECOVERY_RAMDISK-9.1.img, then run command
fastboot erase userdata, and reboot.
-Alf- said:
In fastboot mode flash stock recovery_ramdisk, download Here
Use command fastboot flash recovery_ramdisk RECOVERY_RAMDISK-9.1.img, then run command
fastboot erase userdata, and reboot.
Click to expand...
Click to collapse
with this command i resolved, the ROM has been installed Thank you , but now i must install again twrp?
freddie993 said:
now i must install again twrp?
Click to expand...
Click to collapse
if you need it ...
My little advice - install TWRP instead of eRecovery, it makes things easier... And please use RECOMMENDED TWRP , not this sh... 3.5.2 and above.
-Alf- said:
if you need it ...
My little advice - install TWRP instead of eRecovery, it makes things easier... And please use RECOMMENDED TWRP , not this sh... 3.5.2 and above.
Click to expand...
Click to collapse
i'd installed
twrp-3.6.1_9-0-anne is this wrong for you??
freddie993 said:
i'd installed
twrp-3.6.1_9-0-anne is this wrong for you??
Click to expand...
Click to collapse
this TWRP has caused you problems, but I will not force my opinion on you.
Happy flashing!
-Alf- said:
this TWRP has caused you problems, but I will not force my opinion on you.
Happy flashing!
Click to expand...
Click to collapse
don't worry. thank you very much for your tips
freddie993 said:
don't worry. thank you very much for your tips
Click to expand...
Click to collapse
hey hi id like to know which version of twrp you ended up installing? if any.
had the same issue as you and solved it the same way but id like to keep twrp as my main recovery
James1807 said:
hey hi id like to know which version of twrp you ended up installing? if any.
had the same issue as you and solved it the same way but id like to keep twrp as my main recovery
Click to expand...
Click to collapse
hi, sorry for waiting, i have 3.5.1 version
freddie993 said:
hi, sorry for waiting, i have 3.5.1 version
Click to expand...
Click to collapse
ok and uh any special procedure to keep twrp as your main? or you just flashed it to the recovery like that and thats it?
James1807 said:
ok and uh any special procedure to keep twrp as your main? or you just flashed it to the recovery like that and thats it?
Click to expand...
Click to collapse
just flashed to the main recovery, but they both remained and for enter in the twrp i must push vol up+down togheter.