[ROM][12L][UNOFFICIAL][LAVA] ArcaneOS 6.0 - Redmi 9 / Poco M2 ROMs/Kernels/Recoveries/Dev.

[ROM][12L][UNOFFICIAL][LAVA] ArcaneOS 6.0 - Redmi 9 / Poco M2 ROMs/Kernels/Recoveries/Dev.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ArcaneOS 6.0 everglow for lava(lancelot /shiva|redmi 9/poco m2)
Code:
I am not responsible for your brick devices.
The firmware is fully working and has been tested.
If you encounter a problem, write here, maybe they will help you.
Before you accuse me of doing something wrong, take a look at how you use your smartphone.
You don't need to blame me for turning your device into a brick with my firmware, it's not my fault.
Working:
- Wifi
- Sound
- mali drivers
- USB tethering
- Sensors
- Bluetooth
- Wifi HotSpot
- MTP
- 2D and 3D gpu acceleration
- Charging with device powered off
- Stuff I didn't test yet
- Camera
- GPS
- Fingerprint Sensor
- VoLTE
end .etc.
Not Working
- Screen recorder (use a third-party one)
You must have an unlocked bootloader, an up-to-date recovery is installed with support for installing 12 android.
- Flash this archive (from the home folder /data) it will create a backup of the files. This is done once (save the backups you have in a safe place).
Imei backup - here
- Wipe Dalvik/Art, Cache, Format Data and separately Data via yes.
- Reboot to recovery.
- Flash in FW
FW - here
- Flash in ROM
- Flash GApps, Magisk, etc.
- Reboot to system
Congratulations, you have installed ROM!
Attention!For those who do not trust these stages of installation, flash the latest up-to-date MIUI on android 11 via fastboot, after installation, do wipe Dalvik/Art, Cache, Format Data and separately Data via yes, reboot into recovery and flash the firmware.
Install gapps right after installing the rom itself don't try to boot to system before that if you want to use gapps (Or wipe data before installing them)
For 12L - NikGApps. Only these, and no others!
13.04.2022
MD5: 3c0614e200c8649d8ec8b2566c12a6cb
MegaNz | GDrive
21.03.2022
MD5: c3fd8adf240e0998ab0b0cdd53a0f921
MegaNz | GDrive
Version Information
Status: Stable
ROM OS Version: Android 12
ROM Kernel: linux 4.14.x
Based On Android 12L/S
Spoiler
13.04.2022
Device:
- Synchronized with the latest sources.
- April security patch.
- Upgrade the pizza kernel to version 4.14.275.
- Minor fixes.
- Adding PowerHAL Q.
Source code:
- Added an option to enable/disable GAPPS at runtime
- Redesign User Interface
- Added Expandable Volume Dialog
- Custom Dashboard Styles (AOSP,OOS11,OOS12)
- Import Pixel Changes from Google (quicktap, smartspace, game dashboard etc)
- Rework Dialer app colors and icons
- Improved Vivid Colors monet implementation
- Changed default Monet shades for better UI colors
- Reworked Arcana Launcher for vanilla builds - credits to crdroid
- Pixel mod Launcher/Themed Icons for Pixel build by @saitama_96 and Team Files - t.me/modulesrepo
- Rom Performance and stability improvements
Others Changes
- added misc customization and features that seems useful for everyday life
- addressed misc runtime issues from previous versions (bluetooth audio, call audio etc)
- More! just explore grimoire app for customization and misc functionality features were placed on corresponding settings category
21.03.2022
Device:
- Inital build.
- Fix VoLTE.
- Fix ims service.
- Added face unlock.
- The pizza 4.14.269 core is used.
Source code:
- March Security Patch
- Introducing Game Space from KOSP
- Redesigned UI
- fonts and audio pack from proton aosp
- rom performance improvements from proton aosp
- introducing grimoire (dropped tresdin's lair)
- Due to 12L API changes, a lot of features were dropped.
- initial release based on 12L
- A Switch to disable all Google Apps anytime.
Information:
ArcaneOS 6.0|A12L for Redmi 9/Poco M2, ROM for the xiaomi redmi 9/Poco M2
Contributors
Furry__wolf
Credits:
zubairk22oct
Randomas3000
ExpressLuke
GADGETNiK
All your donations go to the server rental, and my time spent!
Payer: P1024778622
Perfect money: U23483501 (account in dollars)
Also if you want you can use QIWI if possible:
QIWI: https://qiwi.com/n/OPPLA249
Device tree:
https://github.com/Redmi-MT6768/android_device_xiaomi_lava
https://github.com/Redmi-MT6768/android_device_xiaomi_mt6768-common
Kernel:
https://github.com/Redmi-MT6768/android_kernel_xiaomi_mt6768
Blobs:
https://github.com/Redmi-MT6768/android_vendor_xiaomi_lava
https://github.com/Redmi-MT6768/android_vendor_xiaomi_mt6768-ims
https://github.com/StatiXOS/android_device_mediatek_sepolicy_vndr

very interesting rom indeed, but what about safetynet? is it passing without magisk ect.?

Foxwile said:
very interesting rom indeed, but what about safetynet? is it passing without magisk ect.?
Click to expand...
Click to collapse
In 12L, problems with this may be fixed soon. I am currently busy working on updating LineageOS

Sir This ROM works on galahad_global ????
Redmi 9 (M2004J19AG)

kyouya_ said:
Sir This ROM works on galahad_global ????
Redmi 9 (M2004J19AG)
Click to expand...
Click to collapse
Yes, it will do, it's for lava, lancelot, galahad

thank you for making this rom, it works very good on my redmi 9, only problem I noticed is that when I unlock phone with fingerprint and display is off, unlock sound plays twice

Wojteł said:
thank you for making this rom, it works very good on my redmi 9, only problem I noticed is that when I unlock phone with fingerprint and display is off, unlock sound plays twice
Click to expand...
Click to collapse
You're welcome, I'm always happy to help)
As for the sound, alas, I can't say anything, there may be some problems in the source code, maybe it will be fixed by the creators of the arcane sources

What's the differnce between this ROM and Lineage OS 19.1?

Ramsestone said:
What's the differnce between this ROM and Lineage OS 19.1?
Click to expand...
Click to collapse
Code bases, etc.

Will there be any updates for this ROM?
I'm just wondering if it's good daily-driver, and should i keep using it

Wojteł said:
Will there be any updates for this ROM?
I'm just wondering if it's good daily-driver, and should i keep using it
Click to expand...
Click to collapse
There will be updates, but not everything is so fast

Thats nice Thanks for quick response!

New update!
Changelog 13.04.2022
Device:
- Synchronized with the latest sources.
- April security patch.
- Upgrade the pizza kernel to version 4.14.275.
- Minor fixes.
- Adding PowerHAL Q.
Source code:
- Added an option to enable/disable GAPPS at runtime
- Redesign User Interface
- Added Expandable Volume Dialog
- Custom Dashboard Styles (AOSP,OOS11,OOS12)
- Import Pixel Changes from Google (quicktap, smartspace, game dashboard etc)
- Rework Dialer app colors and icons
- Improved Vivid Colors monet implementation
- Changed default Monet shades for better UI colors
- Reworked Arcana Launcher for vanilla builds - credits to crdroid
- Pixel mod Launcher/Themed Icons for Pixel build by @saitama_96 and Team Files - t.me/modulesrepo
- Rom Performance and stability improvements
Others Changes
- added misc customization and features that seems useful for everyday life
- addressed misc runtime issues from previous versions (bluetooth audio, call audio etc)
- More! just explore grimoire app for customization and misc functionality features were placed on corresponding settings category
We also have a telegram group, be sure to join if you need help or you want to discuss something.
Group telegram:
Here
I also added a donation section to the main post, if you want to speed up updates and also support me, you can donate as much as you want.
These donations will be used to pay for the server, as well as for my time spent)
I am very grateful to these people:
Without him, this build would not exist - rozenov
Thanks for the help with fixes - zubairk22oct
Thanks for the general advice - ExpressLuke
Thanks for the ideas - Randomas3000 & GADGETNiK

Furry__wolf said:
View attachment 5569219ArcaneOS 6.0 everglow for lava(lancelot /shiva|redmi 9/poco m2)
View attachment 5569197
Code:
I am not responsible for your brick devices.
The firmware is fully working and has been tested.
If you encounter a problem, write here, maybe they will help you.
Before you accuse me of doing something wrong, take a look at how you use your smartphone.
You don't need to blame me for turning your device into a brick with my firmware, it's not my fault.
Working:
- Wifi
- Sound
- mali drivers
- USB tethering
- Sensors
- Bluetooth
- Wifi HotSpot
- MTP
- 2D and 3D gpu acceleration
- Charging with device powered off
- Stuff I didn't test yet
- Camera
- GPS
- Fingerprint Sensor
- VoLTE
end .etc.
Not Working
- Screen recorder (use a third-party one)
View attachment 5569205
You must have an unlocked bootloader, an up-to-date recovery is installed with support for installing 12 android.
- Flash this archive (from the home folder /data) it will create a backup of the files. This is done once (save the backups you have in a safe place).
Imei backup - here
- Wipe Dalvik/Art, Cache, Format Data and separately Data via yes.
- Reboot to recovery.
- Flash in FW
FW - here
- Flash in ROM
- Flash GApps, Magisk, etc.
- Reboot to system
Congratulations, you have installed ROM!
Attention!For those who do not trust these stages of installation, flash the latest up-to-date MIUI on android 11 via fastboot, after installation, do wipe Dalvik/Art, Cache, Format Data and separately Data via yes, reboot into recovery and flash the firmware.
View attachment 5569203
Install gapps right after installing the rom itself don't try to boot to system before that if you want to use gapps (Or wipe data before installing them)
For 12L - NikGApps. Only these, and no others!
View attachment 5569209
13.04.2022
MD5: 3c0614e200c8649d8ec8b2566c12a6cb
MegaNz | GDrive
21.03.2022
MD5: c3fd8adf240e0998ab0b0cdd53a0f921
MegaNz | GDrive
View attachment 5569211
Version Information
Status: Stable
ROM OS Version: Android 12
ROM Kernel: linux 4.14.x
Based On Android 12L/S
Spoiler
13.04.2022
Device:
- Synchronized with the latest sources.
- April security patch.
- Upgrade the pizza kernel to version 4.14.275.
- Minor fixes.
- Adding PowerHAL Q.
Source code:
- Added an option to enable/disable GAPPS at runtime
- Redesign User Interface
- Added Expandable Volume Dialog
- Custom Dashboard Styles (AOSP,OOS11,OOS12)
- Import Pixel Changes from Google (quicktap, smartspace, game dashboard etc)
- Rework Dialer app colors and icons
- Improved Vivid Colors monet implementation
- Changed default Monet shades for better UI colors
- Reworked Arcana Launcher for vanilla builds - credits to crdroid
- Pixel mod Launcher/Themed Icons for Pixel build by @saitama_96 and Team Files - t.me/modulesrepo
- Rom Performance and stability improvements
Others Changes
- added misc customization and features that seems useful for everyday life
- addressed misc runtime issues from previous versions (bluetooth audio, call audio etc)
- More! just explore grimoire app for customization and misc functionality features were placed on corresponding settings category
21.03.2022
Device:
- Inital build.
- Fix VoLTE.
- Fix ims service.
- Added face unlock.
- The pizza 4.14.269 core is used.
Source code:
- March Security Patch
- Introducing Game Space from KOSP
- Redesigned UI
- fonts and audio pack from proton aosp
- rom performance improvements from proton aosp
- introducing grimoire (dropped tresdin's lair)
- Due to 12L API changes, a lot of features were dropped.
- initial release based on 12L
- A Switch to disable all Google Apps anytime.
Information:
ArcaneOS 6.0|A12L for Redmi 9/Poco M2, ROM for the xiaomi redmi 9/Poco M2
View attachment 5569215
Contributors
Furry__wolf
Credits:
zubairk22oct
Randomas3000
ExpressLuke
GADGETNiK
View attachment 5587241
All your donations go to the server rental, and my time spent!
Payer: P1024778622
Perfect money: U23483501 (account in dollars)
Also if you want you can use QIWI if possible:
QIWI: https://qiwi.com/n/OPPLA249
View attachment 5569217
Device tree:
https://github.com/Redmi-MT6768/android_device_xiaomi_lava
https://github.com/Redmi-MT6768/android_device_xiaomi_mt6768-common
Kernel:
https://github.com/Redmi-MT6768/android_kernel_xiaomi_mt6768
Blobs:
https://github.com/Redmi-MT6768/android_vendor_xiaomi_lava
https://github.com/Redmi-MT6768/android_vendor_xiaomi_mt6768-ims
https://github.com/StatiXOS/android_device_mediatek_sepolicy_vndr
Click to expand...
Click to collapse
NOT ABLE TO USE JIO SIM
PLESE TELL ME WHAT TO DO?

Related

[ROM][UNOFFICIAL][5.1.1]CyanogenMod 12.1 for Samsung Galaxy J5 (2015)

Bugs and Issues
Code:
- No audio through FM Radio.
Let me know if you find other bugs!
--------------------------------------------------------------------------------------------------------------------------------------------
Submitting Bug Reports:
If you find some bugs, report it with logs and detailed information of the issue.
Do not report bugs if custom tweak is done.
Do not report bugs if Xposed is installed!
---------------------------------------------------------------------------------------------------------------------------------------------
Changelog:
Code:
[B]October 11, 2016[/B]
- Final build.
- Fixed all issues with GPS and Wi-Fi.
- Added new frequencies that Samsung had not included for CPU. (200MHz-1401MHz)
- Kernel stability updates.
- Audio low-latency porting to CM.
- Audio FX made the right way. (Audio is loud and crispy now)
- Abandoning FM project to work for CM13. (No audio)
- Merged with latest CM Changes.
[B]September 28, 2016[/B]
- Fixed lagging issues.
- Imported SIP/voIP connection features into ROM. (Needs testing)
- Enabled DSP audio processing by default.
- Disabled GPS logging that was ovehauling our logcats.
[B]September 23, 2016[/B]
- Fixed reboot issues.
- Fixed lags from not needed libraries and kernel commits.
- Fix rmnet (data) issues.
- Dalvik/ART optimizations.
- Removed extra governors/io schedulers.
(The provided governors in OC kernels for J5 are for Exynos devices,
so they need extra configuration to be adapted to Snapdragon devices.
Until then, we will use the stock and trusted ones,
but keep overclocking to be enabled by a userspace application).
- Many kernel fixes.
- Framework fixes.
- Audio enhancements.
- Added audio echo cancellation support (AEC) for in-calling audio.
- Added Wifi-Direct and Screen Cast/HDMI support in kernel. (Needs testing)
- Added Volume wake and Home button wake support.
(You can enable/disable these features from Settings->Buttons)
- Merged with latest CM Changes.
[B]September 8, 2016[/B]
- Removed On-Screen-Buttons implementation.
(Currently we don't have an implementation for hard disabling touch-keys in kernel.)
- Kernel fixes.
- Attempt to fix reboot issues and data problems for [B]G[/B] and [B]H[/B] variant.
- Removed KernelAdiutor
[B]September 2, 2016[/B]
- Added OC in kernel and fixes for frequency ladder. (0.2 to 1.8 GHz)
- Added a lot of governors and I/O schedulers.
- Added KernelAdiutor as a built-in application for tweaking parameters.
- Added DayDream support by default.
(It is a screensaver feature for Android.
You can choose your preference in Settings -> Display & lights -> DayDream)
- PowerHAL fixes.
- Disabled compression of camera images, set quality of Encoder to 100% and increase memCap *4.
(Image sizes are larger, and have better quality)
- Added On-Screen-Buttons implementation similar to qemu.hw.mainkeys=1.
(You can use software keys for Back/Menu/Options, by enabling it on the first setup screen.
Main keys will be permanently disabled)
- Merged with latest CM Changes.
[B]August 20, 2016[/B]
- Excluded InputDisabler from build. (Not needed from now on as we found the root of the cause)
- Screen on/off lag reduction. (WIP)
- Fixed SD Card issues and corresponding folder creations on boot.
- Added option to secure unmount external SD before removal.
- Added option to record in-call voice for all regions.
- CPU speed/responsiveness optimizations.
- SELinux denial fixes for other variants too.
- Switched to SELinux enforcing, minized kernel messages and ADB secure (needs su command from now on).
- Optimized latency for audio HAL. No drop-outs from now on.
- Audio effect optimizations. Sound is more crisp.
- Excluded zRAM.
(zRAM caused not needed CPU overhead and heat issues when on Full Brightness+Mobile Data+GPS)
- TWRP bug-fixes.
- Kernel fixes.
- Merged with latest CM Changes.
- Updated stable release name to 2.0.0
[B]July 22, 2016[/B]
- Fixed small freeze on screen unlock.
- Fixed Auto Display Color Calibration.
- Disabled Auto Brightness feature. (No light sensor for J5)
- Raised the perceived loudness by 4db on headphones, and 4db on speaker output.
- Fixed audio minor drop-outs when exiting deep sleep.
- Fixed some firmware link typos.
- Enabled zRAM. (512MB)
- Merged with latest CM Changes.
[B]July 15, 2016[/B]
- Fixed NFC.
- Fixed Keymaster firmware detection.
- Merged with latest CM Changes.
[B]July 14, 2016[/B]
- Fixed moving apps to external SD.
- Added option to choose the default install location of applications in Settings.
- Optimized haptic feedback.
- Fixed front flash camera latency.
- Merged with latest CM Changes.
[B]
June 23, 2016[/B]
- Optimized CPU usage.
- Fixed SELinux Denials.
- Fixed audio latency and quality.
- Fixed QR Scanner display errors and camera related problems.
- Kernel updates.
- Merged with latest CM Changes.
--------------------------------------------------------------------------------------------------------------------------------------------------
Tips :
To activate Developer settings : Settings -> About phone -> press Build number 7 times.
To activate 3-way reboot go to Developer settings and select "Advanced reboot".
Root is included and disabled by default, enable it from Developer settings - Root access.
BusyBox is included.
LiveDisplay is a feature for adapting display colors for night usage.
You can enable it by turning on GPS and data/wifi for some seconds.
Then go to Settings -> Display & lights -> LiveDisplay -> Display mode and change from off to automatic.
Then your phone will know when to adjust your display for night usage through your local GMT zone.
You can also adjust Color Temperature for Day/Night modes.
Screen Cast is a feature to cast your screen to a Smart TV.
Enable Wi-Fi and check Settings->Display & lights->Cast screen->Enable wireless display, connect both devices, and play!

Multi Window Support - J500F
Hi @Nick Verse
First of all, Thank You so much for this awesome rom..
I just have one request..
I'm using J500F (Indian Version)..
Can you add Multi Window Support in the next release of this rom for J500F..??
Thanks in advance..

Just use CM13... lol

Cm 13 is not yet stable, fully working. And dont try to undermine other peoples work.

Hi there
Who can help me to understand and solve the following situation: i want to add spelling romanian language to stock cm12.1 keyboard. Romanian language is available only just as language, for entire operation system, not for spelling purposes (is not in the spelling languages list when i try to add it). So, how can i add it whitout installing another app like Google Keyboard? Is possible?
I use Nicke Verse CM12.1 version from 15.07 on a J500FN.
Best!

y-c-s said:
Hi there
Who can help me to understand and solve the following situation: i want to add spelling romanian language to stock cm12.1 keyboard. Romanian language is available only just as language, for entire operation system, not for spelling purposes (is not in the spelling languages list when i try to add it). So, how can i add it whitout installing another app like Google Keyboard? Is possible?
I use Nicke Verse CM12.1 version from 15.07 on a J500FN.
Best!
Click to expand...
Click to collapse
Propably CyanogenMod official developers didn't add the spelling feature for Romanian language in the official repository! You can contribute in GitHub on your own if you want, or PM a Developer!

abhijeet1331 said:
Hi @Nick Verse
First of all, Thank You so much for this awesome rom..
I just have one request..
I'm using J500F (Indian Version)..
Can you add Multi Window Support in the next release of this rom for J500F..??
Thanks in advance..
Click to expand...
Click to collapse
Multi-Window support uses Android API 24, which means you will have to wait for Android 7.0!

Nick Verse said:
Multi-Window support uses Android API 24, which means you will have to wait for Android 7.0!
Click to expand...
Click to collapse
Which most likely will never come from Samsung.
Sent from my SM-J500F using Tapatalk

punmeister said:
Which most likely will never come from Samsung.
Sent from my SM-J500F using Tapatalk
Click to expand...
Click to collapse
Yes! But we'll do something if we can

magix01 said:
Cm 13 is not yet stable, fully working. And dont try to undermine other peoples work.
Click to expand...
Click to collapse
I was referring to adding multi-window support... because it's kinda buggy if implemented on Lollipop...
I never undermine anyone's work and am currently using Nick Verse's CM12...
Sorry for the misunderstanding...

Nick Verse said:
Multi-Window support uses Android API 24, which means you will have to wait for Android 7.0!
Click to expand...
Click to collapse
Okay.. Thanks..

When will the download links be available?
Sent from my Galaxy j5 using Tapatalk

Very soon
Sent from my SM-J500H using Tapatalk

ayamati said:
Just use CM13... lol
Click to expand...
Click to collapse
please don't mess the thread by giving unnecessary suggestions.

Aasis34 said:
please don't mess the thread by giving unnecessary suggestions.
Click to expand...
Click to collapse
It was a relevant answer to the multi-window question. I don't mess anything.

Updated [Downloads Tab]
Updated SM-J500FN. Next is SM-J500F. Download links will be in the downloads tab from now on.

Audio Latency
We have noticed some longer than usual audio delays a long time ago in CM builds from source.
The main concept is to make the builds as fast responding as possible.
- Currently the audio.primary.msm8916 module is a proprietary blob, because without it in-call audio breaks. (related to proprietary Samsung RIL blobs)
- Disabled AUDIO_OUTPUT_FLAG_FAST, as it is constantly denied in logs even when set in native 44100 sampling rate.
Sources:
https://github.com/Galaxy-J5/android_device_samsung_j5-common
If anyone is familiar with building sources and is aware of the issue, please contact me.

Updated [Downloads Tab]
Updated SM-J500F

@Nick Verse
Thank you for your awesome work!
I think I'll test the new version later.
By the way, I think you should mention in OP how to download, because some people use the old XDA theme (2010), including me (but I know how to download) and they can't see the project tabs unless they switch to at least 2013 theme.
EDIT:
@Nick Verse : When you go to downloads tab, there is download link. You can put it in OP as direct download link, but people will still have to switch to at least 2013 theme. Maybe you can put the link of downloads tab too. It's your choice
PS: limited to thanks button -_-

[ROM][8.1.0]LineageOS-15.1[OP2][STABLE][UNOFFICIAL]

Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab dmesg . (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
Changelogs
First Alpha Build:
- Initial build
Second Alpha Build:
- Fixed MSIM network settings crash
- Fixed Audio through BT
- Hardware nav keys backlight support added
Third Alpha Build:
- Added FP wrapper and reduced FP delay
- kernel updates and inclusion of KCAL and other great stuff
- Alert Slider fixed
- Offline gestures work as intended
- Camera working partially
- Flashlight works
- Double Tap 2 wake can be enabled from KA
- Minor bug fixes
Fourth Alpha Build:
- Alarm clock fixed
- Portable WiFi hotspot working
- DRM supporthttps://www.androidfilehost.com/?fid=962157660013070592
- Added AOD (Always On Display). Refer to FAQ for more info
- Added Pixel color accent. Refer to FAQ for more info
- Fixed AOSP keyboard gesture typing
- Minor bug fixes
- Video recording works for FHD and other lower resolution tasks
First Beta Build:
- Screen Recording fixed completely
- Implemented HAL3
- Enabled camera modes
- Added advance reboot
- upstreamed kernel
- Video recording fixed
- Green photos while clicking multiple pictures fixed
- Minor bug and exploit fixes
Second Beta Build:
- Added 4K profile video recording support.
- September security patch
- Blueborne exploit patched
- Reduced random reboots upon connecting to PC/laptop
- Removed CNE and DPM
- Data toggle fix
- Default camera will be pinned to memory (Faster launch)
- Fingerprint wakeup improvements
- Removed "Device is HD compatible" persistent notification
- minor bug fixes
Third Beta Build:
- Random reboot upon USB replug/unplug fixed
- Fixed camera not recording videos after sometime upon booting
- Fixed voice calls through BT
- October security patch
- Channel notification debug toast hidden
- Various NPE possibilities patched
- USB related patches
- Fixed MTPserver crashes
- Turned carrier provisioning off by default to allow tethering
- Enabled back ANT+
- Enabled dexpreopt for quick boot up
- Fingerprint improvements
- Minor string and bug fixes
Fourth Beta Build:
- Ability to hide "Apps running in background" dialog
- Virtual navbar enabler (It'll disable hw keys automatically)
- Substratum rootless support (BETA)
- Button remapper (disabled for back button to preserve some default functions)
- hardware buttons backlight timeout
- backlight intensity slider
- Redesigned ringtone logic
- Added ADB over network
- Added toggle to turn off screenshot sound
- Enabled camera modes and RAW back(captured RAW images look fine on desktop)
- Removed CNE and DPM remains
- DT2W toggle fixed
- minor bug fixes and improvements
Fifth Beta Build:
- Boots
- Android version 8.1.0
- Enabled OnePlus doze (Ambient display)
- Enabled notification LED customization overlay
- Camera HAL is now compiled with clang
- Few important RIL patches
- December security patch
Sixth Beta Build:
- Updated Kernel source
- Fixed OEM unlock toggle in developer settings
- Added Quick pulldown
- January security patch
- Few important msim patches
- Removed su binary
- Minor bug fixes and translation updates
Seventh Beta Build:
- Added back button settings
- Added proximity wake flags
- Power profiles are back
- Minor bug fixes and translation updates
Eighth Beta Build:
- Added advance reboot
- Gestures are back (Added more gestures)
- AudioFX effect fixes
- Updated radio and ims blobs
- Enabled back CNE and DPM features
- VoLTE working as expected with newer additions from LineageOS
- Working SIM provisioning (SIM disable switch)
- Added support for ViLTE
- Added required vzw jars needed for VZW US carrier
- Build up-to-date with latest LineageOS merges
- Minor bug fixes and translation updates
First Stable Build:
- System wide Dark/light theme based off wallpaper or manually including 9 accents to complement with (Project Berry)
- Fixed sound playing on both speaker and headphones when a screenshot was taken while listening to music
- Updated RIL daemon
- Added module to load dalvik heap values based off RAM size
- Updated netmgrd and libnetmgr from kenzo
- Updated audio configs
- Updates to core control
- Fixed BT calls and audio stream through BT
- Updated calendar app to oreo style accents
- New adaptive icons for all system apps
- Included Apollo (music player)
- Build up-to-date with latest LineageOS merges
- Added advanced location tile
- minor bug fixes and translation updates
Second Stable Build:
- Added auto face-unlock (Need GApps)
- Fixed FP behaving like home button in some places
- Fixed in-call echo and background noises while on call
- Forced HAL3
- Dropped Snap, ships with Camera2
- Minor bug fixes and translation updates
Third Stable Build:
- March security patch
- Includes LineageOS setup wizard
- Includes bunch of new wallpapers
- Fixes to LOS power HAL
- Updates to styles api
- Contacts will now ignore null accounts
- Added toggle to only light up backlight when buttons are pressed
- Minor bug fixes and translation updates
Fourth Stable Build:
- SELinux Enforcing
- SafetyNet passes without need of magisk now
- "Certified" in Google Playstore app
- Added core_ctl props
- minor bug fixes and translation updates
Fifth Stable Build:
- April security patch
- Fixed flipped photos
- Switched to Snap camera
- Fixed sync issue between photo taken and flash fired
- minor bug fixes and translation updates
(Note: DO NOT flash any custom kernel until they're updated for this specific version. If you do, you're on your own. Don't complain about buggy camera)
Sixth Stable Build:
- Fixed camera not recording videos
- Fixed camera Daemon late start issue
- May security patch
- Added wireguard VPN support
- Add ability to restrict app data/wifi usage
- Fixed netmgrd permissions
- Minor bug fixes and translation updates
Weekly build Changelogs
Weekly dated 20171105:
- KRACK exploit patched
- kernel upstreamed to 3.10.108
- Search button in Settings FC fixed
- Recorder app revamped
- Build contains all latest LineageOS merges at the time of release
Weekly dated 20171113:
- November security patch
- MSIM patches merged for better dual sim management
- Build contains all latest LineageOS merges at the time of release

Frequently Asked Questions:
Q. Can this ROM be flashed through TWRP?
A. Yes, proceed with the latest TWRP official image
Q. Can I run this ROM in multiboot or dualboot setup?
A. You can but I won't accept bug reports or help anything related to that.
Q. Sounds good. How can I contribute to project?
A. Test the build as much as you can and report bugs which can be reproduced with exact steps and are not random.
Q. How to disable "Apps running in background" dialog?
A. When you see the dialog, long press on it and select "Settings". From there, you'll have a toggle to disable it.
Q. Where do I find button settings?
A. Settings -> System -> Buttons.
Q. Where dat donate button yo?
A. No, I don't accept donations.
Build Archive
Old builds are moved here just in case If user wants to revert to it.
Third Alpha build
Fourth Alpha build
First Beta build
Second Beta build
Third Beta build
Fourth Beta build
Fifth Beta build
Sixth Beta build
Seventh Beta build
Eighth Beta build
Stable Builds Archive
20180220
Screenshots attached below

Testing.. Thanks a lot man!

YAY! <3

thnx man... appreciate ur work..
Sent from my ONE A2003 using XDA-Developers Legacy app

Wow @Shreesha.Murthy great job, and nice to see you again here
Enviado desde mi ONE A2003 mediante Tapatalk

@Shreesha.Murthy is it possible to see your device tree too? ^^

manups4e said:
@Shreesha.Murthy is it possible to see your device tree too? ^^
Click to expand...
Click to collapse
massive cleanup needed. Will be pushed soon

Hi @Shreesha.Murthy,
First of all nice work !
I might have found a bug in developer options, under OEM unlocking; it seems we can't turn it on, as it fallback to off immediately after.
Here logs https://hastebin.com/duzitipane.vbs.

appreciate ur work
appreciate ur work

Hallelujah ! ?

nice work

Man, you da real MVP

Nice job fam you can remove the alpha status it is quite stable only major bug is camera nothing else <3

Thanks for the builds. Right now I am stuck at "Patching system image unconditionally" for more than 30 minutes. I have cleaned dalvik cache, wiped data, system and cache before flashing. I am stuck, please help me.

thebenefactor said:
Thanks for the builds. Right now I am stuck at "Patching system image unconditionally" for more than 30 minutes. I have cleaned dalvik cache, wiped data, system and cache before flashing. I am stuck, please help me.
Click to expand...
Click to collapse
Maybe a bad download, try downloading the build again
Sent from my ONEPLUS A3000 using Tapatalk

arjunsingh1000 said:
Nice job fam you can remove the alpha status it is quite stable only major bug is camera nothing else <3
Click to expand...
Click to collapse
Haha, due to few important things not working, the builds are labeled alpha. When they're fixed, the thread will be bumped to beta and further
Sent from my ONEPLUS A3000 using Tapatalk

Great job man, respect
Sent from my ONE A2001 using Tapatalk

This is dope! Thanks and good luck!
Download speed on data drops some times. While downloading from play store, 2 out of 8 apps failed.
Will keep updating bugs as I find them.

[OFFICIAL] [Sanders] 9.x||8.x.y || [64bit] || Ground Zero ROMs || Gzosp || Validus

The All-In-One thread for Ground Zero ROMs - Gzosp, Validus
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Notes from the Official Google+ Community:
About the ROMs :
Gzosp is AOSP (including CAF) and is pure stock experience. This is used as base for many other projects.
Validus is GZOSP based with a Wolfie theme and has a lot of features. 
G+ Community
https://plus.google.com/u/0/communities/109330559573276360638
Substratum G+ Community
https://plus.google.com/u/0/communities/102261717366580091389
GZR TWRP Themes
https://onedrive.live.com/?id=67559CDE482EDC1E%21762&cid=67559CDE482EDC1E
George's Validus, Tesla and Tipsy TWRP themes
https://plus.google.com/114004832310481604983/posts/iyFes7Bd89V?sfc=true
https://plus.google.com/114004832310481604983/posts/AEpG9Sgpbmc
https://plus.google.com/114004832310481604983/posts/GTitspyk1aC?sfc=true
Pete Best GZR Sanders Boot Logos
https://drive.google.com/open?id=1MRRarMxFW5pxnT7rr4WNWcki7RDkoZIM
Installation Instructions
ALWAYS MAKE A NANDROID BACKUP FIRST!
MULTIROM Support is discontinued! Use any TWRP recovery available for our device!!
Coming from another rom/clean install:
Reboot to recovery.
Wipe system, cache, dalvik/art cache, data
Flash rom zip and gapps
Reboot
Updating from a previous build/dirty flash:
Wipe system, cache, dalvik/art cache in recovery
Flash rom zip, gapps and any other zips you may use
Reboot
Installing through Multirom for Oreo builds...
If you wanted to kept Stock as Primary & GZR Builds on Secondary:
Make sure you do Backup First!
1.Unlock the bootloader via Fastboot Commands Unlock Bootloader
2.Flash Multirom TWRP Recovery via Fastboot CommandTWRP-multirom-sanders-20171016-02.img
3.Flash Magisk V14.0
After booting into recovery, you need to do a factory reset.
Then reboot into recovery again.
Wipe System, Cache, Dalvik/art cache, data
Flash Rom Zip file and gapps
Reboot
Note: If you set Fingerprint + Pattern/ Pin on Primary/Stock then you need to flash a Lock Fix file on Primary
Lockfix.zip
Rooting:
Ground Zero ROMs are not shipped rooted. Flash your favorite root apps like Magisk/SuperSU or any other. After flashing, your device may boot twice before boot animation, don't worry it'll be fine after that.
Theming:
Substratum support is there as long as you have root and latest Substratum app. Some themes may have a little catching up to do, have fun testing them!
Reporting Issues:
If you have any issues, grab a log after a clean flash, upload and link here please. Add steps to reproduce the issue in your post.
Do not report issues dirty flashing this over some unofficial build or with some kernel flashed.
Logcat Extreme app is great as you can choose to start recording a log just before reproducing an error and stop recording just after so you log just the part you need.
Few Notes:
Xposed is not supported here, if you want to run it and have issues, try an Xposed thread for support and bug reports here only welcome with a clean install with no Xposed present.
Selinux is permissive for now.
Make sure to state which rom you are running when asking for support
Open Gapps
http://opengapps.org/
Downloads
Pie 9.x
All Gzosp Builds can be found here https://www.androidfilehost.com/?w=files&flid=282442
Note: Fingerprint blobs are updated to Oreo base. Those who have not updated to Stock Oreo and are still with Stock Nougat, need to install FP firmware from here https://www.androidfilehost.com/?fid=1322778262904016554
If you are going back to Oreo ROMs without flashing Stock Nougat, then flash this for FP https://www.androidfilehost.com/?fid=1322778262904016458
Oreo 8.x
All Gzosp/Validus Builds can be found here https://www.androidfilehost.com/?w=files&flid=222164
New Validus/GZOSP Builds can be found here, GZR AFH https://www.androidfilehost.com/?w=files&flid=231002
Source Code:
https://github.com/GZOSP
https://github.com/ValidusOS
Device tree (branch: 9.0)
Kernel (branch: 9.0)
Vendor (branch: 9.0)
Credits
- GZR Team
Thanks to vache for his work on the Device.
XDA:DevDB Information
ValidusO, ROM for the Moto G5S Plus
Contributors
premaca, syed sajid, oadam11
Source Code: https://github.com/GZOSP
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
Based On: GZOSP
Version Information
Status: Beta
Current Beta Version: 16.0
Beta Release Date: 2017-10-09
Created 2017-10-17
Last Updated 2018-09-29

*** Change Log ***
PIE 9.x
10.10
Download:
https://androidfilehost.com/?fid=1322778262904024094
- Fixed Moto Actions
- Other source changes and fixes
10.07
Download:
https://androidfilehost.com/?fid=1322778262904021921
- October security patches
- android_r10
- Kernel upstreamed to 3.18.123
- Moved to full treble support
- AOSP Email, default-browser removed
- Minor customisations to AOSP launcher3
- Other source changes and fixes
09.27
Download:
https://androidfilehost.com/?fid=1322778262904015807
- Fixes safetynet
- Fixes installation of magisk modules
- Kernel upstreamed to 3.18.123
- Other source changes and fixes
Note: Fingerprint blobs are updated to Oreo base. Those who have not updated to Stock Oreo and are still with Stock Nougat, need to install FP firmware from here https://www.androidfilehost.com/?fid=1322778262904016554
If you are going back to Oreo ROMs without flashing Stock Nougat, then flash this for FP https://www.androidfilehost.com/?fid=1322778262904016458
09.14
Download:
https://androidfilehost.com/?fid=1322778262904005185
- Initial 9.0 released
- android-9.0.0_r7
- September security patch
- Kernel upstreamed to 3.18.122
*******************************************************************
Oreo 8.x
07.07
- July Security patches
- android-8.1.0_r41
- Blobs update from leaked oreo
- Kernel upstreamed to 3.18.114
- Other source changes and fixes
Gzosp: Stable 1.1 https://www.androidfilehost.com/?fid=5862345805528043123
Validus: 2.6 https://www.androidfilehost.com/?fid=5862345805528043117
Tipsy: 1.2 Cristal https://www.androidfilehost.com/?fid=5862345805528043128
*** GZOSP *** Change Log
04.15
Download:
https://www.androidfilehost.com/?fid=890129502657598219
- Kernel upgraded to 3.18.105
- Launcher3 supports dark mode, hide-apps
- Other source changes and fixes.
04.05
Download:
https://www.androidfilehost.com/?fid=673956719939832864
- April security patch
- android_8.1_r20
- Other source changes and fixes.
02.18
Download:
https://androidfilehost.com/?fid=818070582850493507
- Kernel upgraded to 3.18.94
- CPU frequencies fixed, with 2.0Ghz max
- SIM cards FC in Network & Internet is fixed
- Android upgraded to android-8.1.0_r11
- February security patch
- Other source changes and fixes
11.16
Download:
https://www.androidfilehost.com/?fid=962021903579492991
- r32 November security patches
- FM Radio
- Enhanced Launcher3 with icon support and more options
- Nightlight fixed
- Acdb ids from Stock for fixing audio issues in few VoIP apps
- Gzosp dark theme
- BT in-call fixes
- More Moto Actions
- Display network name on status bar
- Other source changes and fixes
10.18
- Download Gzosp-sanders-8.0.Beta.1.0-OFFICIAL-20171018-0108.zip
- Initial Release
*** ValidusOS *** Change Log
04.15
Download:
https://www.androidfilehost.com/?fid=818070582850507985
- Kernel upgraded to 3.18.105
- Launcher3 supports dark mode, hide-apps
- Other source changes and fixes.
04.06
Download:
https://www.androidfilehost.com/?fid=746010030569967022
- April security patch
- android_8.1_r20
- Other source changes and fixes
03.24
Download:
https://www.androidfilehost.com/?fid=962187416754470763
- Kernel upgraded to 3.18.101
- Android upgraded to android-8.1.0_r18
- March security patch
- Some stuffses
- Other source changes and fixes
02.18
Download:
https://androidfilehost.com/?fid=962187416754461417
- Kernel upgraded to 3.18.94
- CPU frequencies fixed, with 2.0Ghz max
- SIM cards FC in Network & Internet is fixed
- Statusbar Clock options (Center clock etc)
- Statusbar battery options (Circle,BigCircle etc)
- Screen off animation (CRT/Scale/Default)
- Android upgraded to android-8.1.0_r11
- February security patch
- Other source changes and fixes
02.04
Download:
https://androidfilehost.com/?fid=746010030569951604
- Default Home is Launcher3
- Widgets showing is fixed (like calendar, gmail etc)
- Sound Recorder added
- Audio issues some reported should be fixed
- Statusbar Clock customization
- Kernel is reworked from scratch based off Motorola Stock kernel
- Kernel is upstreamed to 3.18.93
- Other source changes and fixes
01.03
- Download Validus-sanders-8.1.Alpha.1.0-OFFICIAL-20180103-0041.zip
- 64bit builds started
- Initial build of 8.1
- Multirom recovery is updated with 64bits which you can use to flash both 32/64bit builds (download - https://www.androidfilehost.com/?fid=889964283620773492)
- Multirom zip, there is no change, we can use the 20171114 released (download - https://www.androidfilehost.com/?fid=889964283620765983)
- You can run any 32/64 bit builds as Primary or Secondary including Stock (only primary)
- GZR 64bit Gapps tested and recommended.
- Other source changes and fixes
- Issues
------------
- Stock Camera picture has orientation issue, use any third party application if you prefer
- Rare failures on Camera pic/video
11.14
- Download Validus-sanders-8.0.Beta.v16.3-OFFICIAL-20171114-1836.zip
- updated Blobs
- Nightlight is fixed
- Version bumped to 16.3
- Smoother animations
- MotoActions Fixes contd.
- Other source changes and fixes
11.09
- Download Validus-sanders-8.0.Beta.v16.2-OFFICIAL-20171109-0934.zip
- November security patches, Android_8.0.0_R32
- ADB over network tile
- fixes to Moto Actions
- kernel updated to 3.18.80
- Other source changes and fixes
11.03
- Download Validus-sanders-8.0.Beta.v16.2-OFFICIAL-20171103-0931.zip
- Fixes in Dark themes
- Fixed Partition size
- Fixed BT audio-calls (in-car)
- Dexpreopt enabled to speed up bootimes
- Kernel upstreamed to 3.18.79
- Other source changes and fixes
10.29
- Download Validus-sanders-8.0.Beta.v16.2-OFFICIAL-20171029-1554.zip
- More gesture actions in Moto Actions
- Dark themes
- System animations
- Slim recents
- Immersive recents
- Long press back to kill app
- RecentSettings: recents panel clear all button tweaks
- Powermenu: Soft reboot/SystemUI restart
- ‎ kernel upatreamed to 3.18.78
- ‎Other ROM changes/fixes
10.15
- Download Validus-sanders-8.0.Beta.v16.0-Official-20171015-0248.zip
- Stock LCD density reduced to 400.
- Nova is the stock launcher now
- Reset battery stats
- Fixed lock screen weather
- Enabled Proximity-wake (Untested)
- HALs updated to latest CAF (picked from Vache)
- Other ROM changes/fixes
- Kernel is upstreamed to 3.18.75
10.09
- Download Validus-sanders-8.0.Beta.v16.0-Official-20171009-0408.zip
- Based on GZOSP
- Weather QS tile
- Navbar tile
- Lockscreen weather
- Dialer: incall vibrtion
- Dialer: auto proximity speakerphone
- increasing ring feature
- First Build, Beta v16.0
- Disable CRC check
- Fsycn on/off
- sioplus, fiops, zen, maple
- Kcal
- Other optimizations
- Upstreamed to 3.18.74

Known Bugs/ Issues:
PIE 9.x
1. On Reboots, VoLTE/HD icon/notification might be missing, but VoLTE calls work.
2. Report in this thread.
OREO 8.x
1. Camera Freezes when focus clicked and took picture - no workaround.
2. Stock Camera picture has orientation issue, use any third party application if you prefer
3. Rare failures on Camera pic/video
4. You tell me... :laugh:

Does dual camera (depth mode) work
What about volte

#VoltePlz...

Versatility of ROM
Do the roms for G5S plus work on G5 Plus or vice versa?

Root_the_f_up said:
Do the roms for G5S plus work on G5 Plus or vice versa?
Click to expand...
Click to collapse
No, its not a unified device..

Looks excellent, downloading Validus now, cant wait to try it out.!

This rom has volte support?

Joyarup said:
This rom has volte support?
Click to expand...
Click to collapse
Yes, bhai. It does support VOLTE and also HD Video Calling via Jio sim

[email protected] said:
Does dual camera (depth mode) work
What about volte
Click to expand...
Click to collapse
syed sajid said:
#VoltePlz...
Click to expand...
Click to collapse
Joyarup said:
This rom has volte support?
Click to expand...
Click to collapse
Yes it does support Volte and was working fine, didn't get any issue while i used
But Stock camers isn't working properly, when delete pix it closes automatically, photos aren't that accurate form stock camera

On XT1805 the rom is very slow.

New Build is UP!!
Sanders (Moto G5S Plus) v16.0 Beta 10/21
- Live Volume Steps
- Network name on Statusbar (Carrier Label)
- Statusbar notification ticker
- Statusbar Logo (various choice of logos)
- Fix Proximity Wake Switch (OFF by default)
- Kernel upstreamed to 3.18.76
Download:
https://www.androidfilehost.com/?fid=962021903579486730

Schrotty35 said:
On XT1805 the rom is very slow.
Click to expand...
Click to collapse
Did u flash Google apps too?
Bcs i tried in both way(with Gapps & without them)
Rom was smooth and buttery with gapps but too stucky without gapps

Depth Enabled Camera functioning ? Does it have Moto Actions ?

mightyjai said:
Depth Enabled Camera functioning ? Does it have Moto Actions ?
Click to expand...
Click to collapse
Yes Moto actions available, but depth enable camera is not yet implemented, its a stock camera function.

syed sajid said:
Yes Moto actions available, but depth enable camera is not yet implemented, its a stock camera function.
Click to expand...
Click to collapse
If we set the stock camera app in system>privapp then also it won't work?

Soham Biswas said:
If we set the stock camera app in system>privapp then also it won't work?
Click to expand...
Click to collapse
It wont work like that, they need some work also...

Soham Biswas said:
If we set the stock camera app in system>privapp then also it won't work?
Click to expand...
Click to collapse
You need to port the libs also.
Maybe for oreo first motorola should release oreo for us and give us the sources.

When updating all that is needed is to wipe dalvik and cache correct? Or if I don't wipe system too will it be a dirty flash update? Just curious thanks! I'm loving the room smooth and fast and stable! ?
One more question is there anyway you get the Verizon brand off the status bar it was nowhere to be found in settings

[ROM] [11.0.0] dotOS v5.2 [UNOFFICIAL] [begonia/begoniain] [MIUI-A11-fw] [2021.09.15]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
" #DroidOnTime "
ROM Version: 5.2
Device: begonia/begoniain
Maintainer: @Sahil_Sonar
Build Status: Unofficial
Code:
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
"This is a user-friendly thread, all your suggestions are important to us and will be taken into consideration.."
dotOS is an Android ROM which focuses on performance and stability. We focus on making our rom look and feel great without struggling on Performance and Battery! So that one can get most out of his/her device.....
CLEAN FLASH :
Download the latest build and GApps
Reboot to recovery
Make nandroid backup (Not Necessary)
Wipe System, Data, Cache, Dalvik
Flash the latest build and GApps
Reboot
DIRTY FLASH :
Download the latest build
Reboot to recovery
Flash the latest build
Wipe Cache
Reboot
Note: GApps only has to be flashed once whereas Magisk/Su is to be flashed every time you Dirty Flash the OTA Update.
Downloads
Code:
[LIST]
New and refreshed UI
New Customization app (previous named as DotExtras)
Accent Overlay & RGB Picker
Edge Lightning
Battery Styles
Battery Percentage Styles
Clock Customization
Traffic Indicator
Battery Light Customizations
QS Tiles title toggle
QS Tiles style toggle (AOSP & accent)
QS Rows & Columns Customization
New FOD Icon & Animation picker with previews
FOD recognition color picker
Screen-Off FOD
Automatically temporary disable night light while using FOD (toggle)
New Theme Manager
Overlays based Accent Picker
Material Palette Accent Picker
Smart Accent Picker (find automatically proper shade of accent for the other theme; if you apply custom accent for dark theme, press Smart Accent Picker and it will find a good shade to use for light theme and vice-versa)
Fonts, Icon Packs and Icon Shapes picker
Other Extra Features
Hold power to torch
Double tap on statusbar and lockscreen to sleep
Double tap while sleeping to open doze (ambient display)
Quick Screenshot (3 fingers gesture)
Volume Panel position switch (right or left)
Navigation bar pill size customization (hide, stock, medium, large)
Pocket Mode - avoid scree touches while the phone is in your pocket
Use Biometrics on first boot (unavailable for encrypted users)
Lockscreen Media toggle
Built-in Launcher Grid control
MicroG support
[CENTER]
[/LIST]
DotOSteam

AOSP

Pixel Experience

Dirty Unicorns 

And all other open source Devs/Teams.
Mohan CM - Founder/Core Developer
Sam Grande - UI Developer/Project Co-ordinator
Iacob Ionut - UI, UX Developer/ Core Developer
Sipun Kumar - Developer/Maintainer
Shreehari Vaasistha L - Developer/Maintainer
Special thanks:
Aswin - Graphics Designer
ShreeJoy - Web Backend Developer
Manish Bajpai - Web Frontend Developer[/SIZE]
Important Links
Liked The ROM? Want to Help Us? Then gift us some credits
dot OS source
dotOS-Device Sources
Telegram Group
Telegram Channel
Website
REPORTING BUGS!
As soon as the problem occurs, take a logcat!
for more READ THIS
and do not forget to send it to us
XDA DevDB Information
dotOS, ROM for Redmi Note 8 Pro
Contributors: @Sahil_Sonar
Source Code: https://github.com/DotOS
Kernel Source:: https://github.com/AgentFabulous/begonia
ROM OS Version: 11.x Android R
ROM Kernel: 4.x
ROM Firmware Required: Must be on the latest stable firmware
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: v5.2
Stable Release Date: 15-08-2021

What's working?
Code:
- Boot : Working
- GApps : Anything should work :)
- Bluetooth : Working
- NFC : Working
- WiFi : Working
- WiFi Hotspot : Working
- USB Tethering : Working
- RIL - Phone - Data :Working
- VoLTE : Working
- GPS : Working
- Camera - Camcorder : Working - all camera sensors
- Sensors : Working
- Audio : Working
- Media Playback : Working
- Kernel : Boots
- Offline Charging : Working
- USB : Working
- Encryption : Working
- Fingerprint : Working
- SELinux : Enforcing
A HUGE thanks to everyone who believed and helped test my builds! This would have been impossible without them. Here's them in no particular order
- Agent Fabulous
- Sagar Sorathiya (absolute madlad tester)
- Takamine Takane
- Flamefusion
- Leo
- Chandan
- Vasco
- Ypsprrttt
- Zinadin Zidan
- Juan
- Mashopy
- Shanike
- Martin
- THEMAXIMUMPOWER
And anyone else I missed!
Also, huge thanks to @theimpulson and @dev_harsh1998 for helping and contributing to begonia!

Changelogs:
Build 15-09-2021
Synced with dotOS 5.2
Enable VNDK runtime isolation
Update kernel from begonia-r-oss
Inlined kernel modules
Update firmware begonia V12.5.3.0.RGGMIXM
Update blobs from begonia V12.5.3.0.RGGMIXM
Update audio configs from begonia V12.5.1.0.RGGMIXM
Update media configs from begonia V12.5.1.0.RGGMXM
Update seccomp configs from begonia V12.5.1.0.RGGMIXM
Update public.libraries from begonia V12.5.1.0.RGGMIXM
Update permissions from begonia V12.5.1.0.RGGMIXM
Update rootdir from begonia V12.5.1.0.RGGMIXM
Update dtbo certs from begonia V12.5.1.0.RGGMIXM
Update properties from begonia V12.5.1.0.RGGMIXM
Turn on BOARD_USES_METADATA_PARTITION
Enforce RRO for all resource overlays
Build 15-04-2021
Synced with dotOS 5.0.1
Enforced SELinux
Fixed VoLTE on various carriers
Fixed mi_thermald
Dropped non-required xiaomi hidls
Build 07-02-2021
Updated blobs from MIUI 12 Global fw
Updated kernel from begonia-q-oss release
Updated DRM blobs from MIUI Android 11
Say bye bye to CFW #RIPCFW
Build 02-02-2021
Initial release

ehh wtf, why did my request got deleted ?
Just asked fors bugs and integration of slimrecents...

sebb2209 said:
ehh wtf, why did my request got deleted ?
Just asked fors bugs and integration of slimrecents...
Click to expand...
Click to collapse
Actually the thread was remade lol

Cool DotOS is always my favorite, gonna install it. But I'm currently on CFWv4.
Do I need to go back to MIUI first (by using SP FLASH tool and do full flash) ??
Also, do I need to install non-CFW recovery ??
What else I need to install ??

kuchienkz said:
Cool DotOS is always my favorite, gonna install it. But I'm currently on CFWv4.
Do I need to go back to MIUI first (by using SP FLASH tool and do full flash) ??
Also, do I need to install non-CFW recovery ??
What else I need to install ??
Click to expand...
Click to collapse
Flash MIUI 12 fast boot firm
Flash Unified TWRP you can find it here
Flash the ROM and Gapps (I would suggest NikGapps)
Format data and reboot to system
Happy flashing!

Thank you Sahil for the great work, we do appreciate your time for making such a great Rom

Very pro rom, peruu developer much appreciated
Chetheviper said:
Thank you Sahil for the great work, we do appreciate your time for making such a great Rom
Click to expand...
Click to collapse
You sir plox backup and flash and let me know on TG kthxbye

Installed it, just found 1 problem so far,
It cannot read my MicroSD card, and it says corrupted, although it works just fine on TWRP lol. After some google search, someone said it is because it does not support exFAT file system. The solution is to use FAT32 file system.
But man, it's FAT32...
Can you confirm this OP?

No camera on this build, it's missing here

Sahil_Sonar said:
Flash MIUI 12 fast boot firm
Flash Unified TWRP you can find it here
Flash the ROM and Gapps (I would suggest NikGapps)
Format data and reboot to system
Happy flashing!
Click to expand...
Click to collapse
Is this what you mean sir..
Device: Redmi Note 8 Pro Global
Codename: begonia
Version: V12.0.6.0.QGGMIXM
Branch: Stable
Size: 63.5 MB
Release Date: 2021-01-22
Firmware Package Name: fw_begonia_miui_BEGONIAGlobal_V12.0.6.0.QGGMIXM_94fe33a53c_10.0.zip

Sahil_Sonar said:
" #DroidOnTime "
ROM Version: 5.0
Device: begonia
Maintainer: @Sahil_Sonar
Build Status: Official
Code:
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
"This is a user-friendly thread, all your suggestions are important to us and will be taken into consideration.."
dotOS is an Android ROM which focuses on performance and stability. We focus on making our rom look and feel great without struggling on Performance and Battery! So that one can get most out of his/her device.....
CLEAN FLASH :
Download the latest build and GApps
Reboot to recovery
Make nandroid backup (Not Necessary)
Wipe System, Data, Cache, Dalvik
Flash the latest build and GApps
Reboot
DIRTY FLASH :
Download the latest build
Reboot to recovery
Flash the latest build
Wipe Cache
Reboot
Note: GApps only has to be flashed once whereas Magisk/Su is to be flashed every time you Dirty Flash the OTA Update.
SourceForge
Code:
[LIST]
New and refreshed UI
New Customization app (previous named as DotExtras)
Accent Overlay & RGB Picker
Edge Lightning
Battery Styles
Battery Percentage Styles
Clock Customization
Traffic Indicator
Battery Light Customizations
QS Tiles title toggle
QS Tiles style toggle (AOSP & accent)
QS Rows & Columns Customization
New FOD Icon & Animation picker with previews
FOD recognition color picker
Screen-Off FOD
Automatically temporary disable night light while using FOD (toggle)
New Theme Manager
Overlays based Accent Picker
Material Palette Accent Picker
Smart Accent Picker (find automatically proper shade of accent for the other theme; if you apply custom accent for dark theme, press Smart Accent Picker and it will find a good shade to use for light theme and vice-versa)
Fonts, Icon Packs and Icon Shapes picker
Other Extra Features
Hold power to torch
Double tap on statusbar and lockscreen to sleep
Double tap while sleeping to open doze (ambient display)
Quick Screenshot (3 fingers gesture)
Volume Panel position switch (right or left)
Navigation bar pill size customization (hide, stock, medium, large)
Pocket Mode - avoid scree touches while the phone is in your pocket
Use Biometrics on first boot (unavailable for encrypted users)
Lockscreen Media toggle
Built-in Launcher Grid control
MicroG support
[CENTER]
[/LIST]
DotOSteam

AOSP

Pixel Experience

Dirty Unicorns 

And all other open source Devs/Teams.
Mohan CM - Founder/Core Developer
Sam Grande - UI Developer/Project Co-ordinator
Iacob Ionut - UI, UX Developer/ Core Developer
Sipun Kumar - Developer/Maintainer
Shreehari Vaasistha L - Developer/Maintainer
Special thanks:
Aswin - Graphics Designer
ShreeJoy - Web Backend Developer
Manish Bajpai - Web Frontend Developer[/SIZE]
Important Links
Liked The ROM? Want to Help Us? Then gift us some credits
dot OS source
dotOS-Device Sources
Telegram Group
Telegram Channel
Website
REPORTING BUGS!
As soon as the problem occurs, take a logcat!
for more READ THIS
and do not forget to send it to us
XDA DevDB Information
dotOS, ROM for Redmi Note 8 Pro
Contributors: @Sahil_Sonar
Source Code: https://github.com/DotOS
Kernel Source:: https://github.com/AgentFabulous/begonia
ROM OS Version: 11.x Android R
ROM Kernel: 4.x
ROM Firmware Required: Must be on the latest stable firmware
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: v5.0
Stable Release Date: 07-02-2021
Click to expand...
Click to collapse
Really good, how do I fix cts basic and fp fail?
fingerprint is already set to redfin... do i use props

Wow, does non-cfw mean that I could brick my phone if I do anything wrong?
Can't wait to have a try!

Sahil_Sonar said:
What's working?
Code:
- Camera - Camcorder : Working - all camera sensors
- Sensors : Working
Click to expand...
Click to collapse
Are you sure the Front Camera works on the newer hardware versions??
I don't see any specific Kernel commits that would indicate the problem is now resolved unless your own kernel versions has updated/ported the camera driver ?
Please bare us newer device owners in mind when releasing firmwares and state in the OP if the firmware supports our device's camera or not.
Great work and THANKS! for supporting this great phone
There is MediaTek/Mi kernel source for the s5k3t2 using sunny or ofilm lenses but maybe they could work with other lenses IDK maybe some trial and error is needed. s5k3t2sunnymipiraw & s5k3t2ofilmmipiraw https://github.com/MiCode/Xiaomi_Ke...ivers/misc/mediatek/imgsensor/src/common/v1_1

cześć, czy jest sposób na volte? w opcjach włączone, ale nie działają
MOD EDIT: Please post only in English according to the FORUM RULES or at least add an English translation below your foreign language(Google translator for example), translation added below:
hello is there any way for volte? in options enabled but not working

bigrammy said:
Are you sure the Front Camera works on the newer hardware versions??
Click to expand...
Click to collapse
As Mark Knoplfer once said: THAT AIN'T WORKING (yes, i installed this).

Does anyone have issues with Google Assistant? Activating Hey Google is greyed out... however, it works if you swipe up

kuchienkz said:
Installed it, just found 1 problem so far,
It cannot read my MicroSD card, and it says corrupted, although it works just fine on TWRP lol. After some google search, someone said it is because it does not support exFAT file system. The solution is to use FAT32 file system.
But man, it's FAT32...
Can you confirm this OP?
Click to expand...
Click to collapse
Same here... I have no choice but to format it and use it as an internal storage just so that I can use it. This is commonly an issue to A11 ROMs out there.
SirSeanM10Pro said:
Really good, how do I fix cts basic and fp fail?
fingerprint is already set to redfin... do i use props
Click to expand...
Click to collapse
Update redfin FP and enable MagiskHide. Worked for me.

jpy794 said:
Wow, does non-cfw mean that I could brick my phone if I do anything wrong?
Can't wait to have a try!
Click to expand...
Click to collapse
Yes, good point. I want to try it too but I hope to hear @Sahil_Sonar ’s response to your question.

Development [ROM][11.0][OFFICIAL] crDroid Android v7.x (mojito/sunny)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features
Click for feature list
Always Have a full functional Backup. Just in case!
GAPPS | MICROG | Vanilla
Useful Links:
Magisk
Orange Fox
Logcat Reader
Installation Order:
> Flash / Sideload
> Reboot to Recovery
> Format (optional)
[OR]
Install it directly from fastboot if you have issues with sideloading
Don't expect any support if you:
- are not running the included kernel
- have installed any crazy mods !
- have modified system files
Thanks to:
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
Contributors:
@ZIDAN44
@TheMalachite
@gwolfu
@mukesh22584
@adi153
XDAevDB Information
Source Code: https://github.com/crdroidandroid
Kernel Source Tree: xiaomi-sdm678 / android_kernel_xiaomi_mojito
ROM OS Version: Android 11
Based On: LineageOS
SMASH THE LIKE & SHOW YOUR APPRECIATION

Highlights & Device Specific Changes:
Maintainer: Anush Madathumkara
Build type: Monthly
==== 17 December, 2021 ====
- Based on Latest WCSF Kernel
- Fixed Widevine L1
- Fixed random systemui crashes on Widevine L1
- mojito: overlay: set CPU temperature paths
- mojito: overlay: reduce rounded statusbar corner padding
- sm6150-common:Build libgui and its vendor version
- sm6150-common:sepolicy: fix Widevine DRM
- sm6150-common:Add a missing media blob from stock
- sm6150-common:Add missing DRM blobs from stock
==== 17 November, 2021 ====
- Based on Rebased WCSF Kernel
- Fixed some partition related issues (Now flashable via OFRP)
- sm6150-common: Build atrace 1.0 service hals
- sm6150-common: rootdir: Remove enable-low-power trigger from recovery
- sm6150-common: rootdir: Allow all filesystems for USB-OTG
- sm6150-common: prop: Disable sf EGL image tracking
- sm6150-common: Kill kernel cmdline console parameters
- sm6150-common: wifi: Disable wifi packet logging
- sm6150-common: configs: power: Remove pixel audio hints
- sm6150-common: overlay: Disable global mode and CDMA choices
- sm6150-common: overlay: Allow seamless Doze state transitions
- sm6150-common: rootdir: Chown drv8846_dev & akm09970 camera nodes
- sm6150-common: prop: Switch to Codec2 by default
- sm6150-common: prop: Disable Codec2 input surface
- sm6150-common: parts: Add drawable icon for AOD
- sm6150-common: sepolicy: Address virtual AB OTA denies
- sm6150-common: Set NUM_FRAMEBUFFER_SURFACE_BUFFERS to 3
- sm6150-common:Kang HWUI props from stock mojito qssi-user 11 RKQ1.201022.002 V12.5.3.0.RKGMIXM release-keys
- sm6150-common:Add 300Mhz scaling_min_freq for CPUBigClusterMinFreq and CPULittleClusterMinFreq
- sm6150-common: BoardConfig: Drop graphics layer memory buffer
- sm6150-common:Add HDR & WCG Flags
- sm6150-common: Do not use phase offsets as duration.
- sm6150-common: prop: Fix screenrecord lag
- sm6150-common: Define [email protected] into FCM
- mojito: Update to Redfin November FP
- Improved Stability && performance
- 1080p Youtube playback issue addressed (FWIP)
==== 27 October, 2021 ====
- Upated WCS kernel
- Raised reserved partitions to support for improving gapps support
- sm6150-common: Disable partial FB excl rect

Highlights & Device Specific Changes:
Maintainer: Prince Cooper (Discontinued)
Build type: Monthly
==== 01 October, 2021 ====
- Fixed Slow charging
- Fixed camera color shift
- Moved to TWRP (due to ofox kernel issues)
- Allow all filesystems for USB-OTG
- Don't check prox before pulsing
==== 27 September, 2021 ====
- Moved to armv8-2a
- OrangeFox Recovery preincluded
- Added Battery Health Stats
- Added camera cutout notch
- Added XiaomiParts (Dirac, Clear Speaker & Thermal Profiles)
- Added color modes
- Updated blobs from V12.5.3.0.RKGMIXM
- Drop ANX/MiuiCam support for now
- Improved Haptic Feedback
- Fixed Google Backup/Restore
- Fixed FMRadio
- Fixed WFD/Cast
- Fixed LDAC & AptxHD
- Replaced PlayStore with Aurora Store in microg variant
- Smarter decisions on whether to use 2/5Ghz AP
- Updated device cutout corners
- Disabled wifi firmware logging
- Fixed whatsapp mic delay or crashes
- More Smooth AF
==== 21 August, 2021 ====
- Fixed OKGoogle Detection
- Fixed CPU Thermal Info
- Fixed Document Mode
- Added Clone Shots (miuicam)
- Added Smart Charging
- Added Burn-in Protection
- Added Smart Pixels
- Brought back TWRP
==== 09 August, 2021 ====
- crDroid 7.9 upstream
- August patch merged
- mojito: TWRP drop due to instability
- mojito: Bluetooth AAC codec Fixed
- mojito: Wired headset volume buttons fixed
- mojito: ANXCam replaced with MiuiCam port
- mojito: Fastbootd added to Power Menu
- mojito: DavikHeap fixed for 4gb variants
- Revamped Dialer dark theming
- Updated native services for better FPS (to be tested)
- Fixed new message compose with stock Messaging app
- Removed blur additional changes to fix blur glitches
- Added option to disable pill (crdroid > UI)
- Added customization for rounded corners (crdroid > UI)
- Enabled cached app freezer
- Various under the hood updates and misc fixes
==== 16 July, 2021 ====
- crDroid 7.8 upstream
- July security patch
- Increased system size
- Pre-included TWRP
- Included ANXCam 185R
- Fixed Cam AV sync bugs
- Quickstep Blur fixes
- Fix media playback issues
- Fixed VolumeDialog animation when ringer and notification are unlinked
- Power menu UI customizations
==== 08 June, 2021 ====
- Recovery ROMs from now
- Vanilla Variant discontinued
- Latest Firmware Mandatory
- Added Gboard Lite
- Removed MiXplorer Apps
- Less frequent camcorder audio bug
==== 03 June, 2021 ====
- Home crash fixed
- Added stock terminal, AudioFX
- LOS Recovery resolution to native
- VANILLA / GAPPS variants included
- SafetyNet Pass (No fix needed)
==== 24 May, 2021 ====
- Fastboot ROM.
- Weather Provider fixed
- Added Custom Headers
- Video Recording Stutter fixed (can be random)
- Samsung UI audio implemented
- Added Gboard, Via & FMRadio (won't work until we get OSS Vendor)
- Removed substitute apps, improved response time, much more
==== 20 May, 2021 ====
- Initial Build
- May security patch
- Removed some stock apps
- Added QuickPic Gallery

Hello,
¿Is there a app radio FM?
Thanks

Amazing Rom, thanks

uranoscopus said:
Hello,
¿Is there a app radio FM?
Thanks
Click to expand...
Click to collapse
Nop. Will include in the next build.

MPK99 said:
Nop. Will include in the next build.
Click to expand...
Click to collapse
thanks!!!

I see from the filename it's a vanilla version without Gapps.
Does it have signature spoofing already for use of microG?

UniNick said:
I see from the filename it's a vanilla version without Gapps.
Does it have signature spoofing already for use of microG?
Click to expand...
Click to collapse

I'm really happy to see crDroid now on the Redmi Note 10 - I used crDroid already on 2 other phones and in my opinion it's the best custom ROM!
This first build is already excellent, with all the customisation features and only the above mentioned, few bugs.
For use with microG however it shares the similar (but not the same) problems I encountered with dotOS:
- all of my banking apps don't work (with dotOS 2 of 3 worked).
- DHL parcel, Wolt, Flightradar24 etc report problems with missing play services and force close or don't show maps (same in dotOS).
- Uber app works (it doesn't with dotOS).

I tried it also with Gapps now (NikGapps Core Version), flashed via ADB sideload.
Situation a bit better than with microG.
DHL parcel, Wolt etc work now with the Google Maps Interface.
Two banking apps still making problems and complaining about modified operating system.
This doesn't happen with EvolutionX 5.7 ROM for Redmi Note 10, there all banking apps work.

UniNick said:
This doesn't happen with EvolutionX 5.7 ROM for Redmi Note 10, there all banking apps work.
Click to expand...
Click to collapse
It's bcaz evox is not vanilla, it comes with gapps, so play store certification exists.
You know even dotos vanilla had same problems.
Use GApps roms for hazzle free banking experience.

Can I use microg with it ?

suku.incognito said:
Can I use microg with it ?
Click to expand...
Click to collapse
yes

Good ROM. There are minor bugs:
- red border when unlocking the screen
- the screen does not always light up when there is an incoming call

ups2k said:
Good ROM. There are minor bugs:
- red border when unlocking the screen
- the screen does not always light up when there is an incoming call
Click to expand...
Click to collapse
1. Red border is an animation from crdroid home launcher. I can't do anything bout it
2. Reconfigure the Default "Phone" app to dialer.

I've just flashed this rom, WiFi can't be turned on even after I flash the latest firmware, any help please? Or I have to flash the rom again?
Edit: Maybe there's a problem with TWRP, I switched back to lineage recovery and it works fine now.

duc3503 said:
I've just flashed this rom, WiFi can't be turned on even after I flash the latest firmware, any help please? Or I have to flash the rom again?
Edit: Maybe there's a problem with TWRP, I switched back to lineage recovery and it works fine now.
Click to expand...
Click to collapse
It's a fastboot rom, follow instructions carefully & it'll work.

MPK99 said:
I didn't adress anyone to flash firmware. It's pre-included ¯\_(ツ)_/¯
It's a fastboot rom, follow instructions carefully & it'll work.
Click to expand...
Click to collapse
Thanks sir, great rom so far. Will the gapps build arrive soon?

hello,
when you say "• Added Gboard, Via & FMRadio (won't work until we get OSS Vendor)"
the FM radio is ok?, can i listen it?
thanks

Better Mobile App

welcome