Question boot is not being flashed - Xiaomi Mi 11 Lite 5G

costs miui 12.5,bootloader unlocked,usb debugging enabled
I want to install custom rom,via fastboot, but the problem is that after flashing boot.img or vendor boot.img after rebooting through the console in the recovery it gets back into the standard recovery
Before everything worked fine, now I can not flash the boot, what could be the problem?

rayman95 said:
after
Click to expand...
Click to collapse
Tried this?
Assuming you're trying to install Lineage.

rayman95 said:
ALTERNATIVE WAY OF FLASHING THE ROM
For those like me who have issue with flashing this rom here i what I do to bypass recovery issue..
after flash boot+vendor and start on LOS recovery and format data, I click update but I haven' apply update from sdcard1 but justapply from ADB..in advanced settings, there isn't such option....so I installed with ADB sideload
that what I do, and after 1 error I tried again and got error when I command adb reboot that system was not installed but I'm now on your rom....only issue is with my sdcard not recognized...have to backup on pc, format and recopy back, but certainly error on my side when I flash back miui rom.......
for those who don't know how to use ADB sideload here is a tuto you can read
How to Flash Custom ROM using ADB sideload [Easy Steps]
Flash Custom ROM zip file with ADB and Fastboot commands on any Android phone. Install Custom Firmware without TWRP recovery using CMD.
www.droidthunder.com
Click to expand...
Click to collapse
^^
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You can refer to this too ^

Related

Recovery partition?

I had a recovery problem... Recovery is not working...Failed to load Recovery mode.... Maybe my recovery partition missing r something nw wat should i'll do.... Nw am in stock rom it's rooted.. I can flash new recovery?http://tinypic.com/r/2vm65ut/9
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
same issue with me , i have rooted the devices and its running .108 ... now i am only one step away to start testing the roms but i am unable to load the recovery or flash the recovery to device .... tried the TWRP app it gave me error message that recovery partioin not found... please help us to install recovery ...
regards
pint
Try xz dual recovery it worked for me,make sure you are rooted either via supersu or superuser
-Root yours using any method (.108 is kinda easy to root, for me I use kingroot.net).
-Install Nut's Dual Recovery using appropriate one from nut.xperia-files.com (don't forget to enable and authorize incoming USB connection on your phone and allow root access).
-As soon as it finished installing, it should boot into TWRP (if no error occurred, sometimes using old version of nut recovery installer works when not installing)
-Flash Latest SuperSU zip (If you want SuperSU instead of Kingroot, Kingoroot, etc.).
Good Luck.

unable to flash twrb on moto z

i unlock my bootloader then i try to flash twrb it says error load i put screenshot for the problem
please i need help
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Copy the twrp-3.2.1-0-griffin.img to the internal memory of the phone;
2. Temporary boot in TWRP using: fastboot boot twrp-3.2.1-0-griffin.img command;
3. From the booted TWRP flash the twrp-3.2.1-0-griffin.img (select to install images and choose recovery as the destination partition);
4. Optional, perform a full backup (and save it in a safe place) and install Magisk for root.
Beak a leg!
lesbianu said:
1. Copy the twrp-3.2.1-0-griffin.img to the internal memory of the phone;
2. Temporary boot in TWRP using: fastboot boot twrp-3.2.1-0-griffin.img command;
3. From the booted TWRP flash the twrp-3.2.1-0-griffin.img (select to install images and choose recovery as the destination partition);
4. Optional, perform a full backup (and save it in a safe place) and install Magisk for root.
Beak a leg!
Click to expand...
Click to collapse
canot load no such file or directory
no solution i try every thing
Upload some screenshots or pictures with the error/s you are receiving. Without details, no one can help you...
The instructions I gave you in the previous post are working fine on my phone.

Root with Build 11.0.13.0.QFQEUXM

Hi there,
I want tot root my A3 with the above Build, but i can't find this Build anywhere in the Net. Does anybody have this ore at last the boot.img ?
thank you
You will find all boot.img here both magisk patched and stock.
And all stock firmware versions can be found here, if you experience any issues you can always revert to stock
Thank you, but this Build can't be found behind you're links.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
you are on a10. so: install twrp and flash magisk via recovery! download magisk23.apk. rename to magisk23.zip. enter in twrp. enter in adb sidelod mode. conbet phone to pc. open terminal into adb folder. type adb sidelod magisk23.zip. reboot. u can find this full guide in official magisk website
But to install TWRP, I need the Stockrom boot.img
ok, give me more detail... what rom have on your phone???? is not stock???? you don't need boot img for install twrp. into the guide section you can find the procedure step by step. simply install twrp.img via fastboot, and after enter into twrp and flash twrp installer
You can see my build in the Screenshot above. It was automaticly installed during a restart. Its Stock Android One.
I prefer to have the Stockrom boot.img just in case somthing ugly happens (what happens to often).

twrp not working

good evening. i have o problem with the twrp installation.
after unlocking the bootloader with the adb method i tried to install the twrp. at first there was a problem with partition but with no command the twrp will open
.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
the twrp.img is in the platform-tools folder with the same name as the command.
i though thw twrp was installed in the command but it does not open neither in recovery. i tried throug command or by pressing power button and the volupe up.
in addition the phone does open either. i reboot in the fastboot screen.
what is the the mistake and how should i procced?
thank you
poikon5 said:
good evening. i have o problem with the twrp installation.
after unlocking the bootloader with the adb method i tried to install the twrp. at first there was a problem with partition but with no command the twrp will open
.
the twrp.img is in the platform-tools folder with the same name as the command.
i though thw twrp was installed in the command but it does not open neither in recovery. i tried throug command or by pressing power button and the volupe up.
in addition the phone does open either. i reboot in the fastboot screen.
what is the the mistake and how should i procced?
thank you
Click to expand...
Click to collapse
If this phone has A/B partitions this command cannot work.
You must use
Type' fastboot boot twrp.img' without the apostrophes.
The phone will reboot in TWRP after that go to Advanced > Flash Current TWRP.
Or https://forum.xda-developers.com/t/...omi-mi-a3-laurel_sprout.3987759/post-80625495

Problem with installing ROM via TWRP (A/B device)

I have problem with installing new ROM on phone Xiaomi MIX4 with A/B Partition file system. I followed this tutorial: https://www.xda-developers.com/how-to-install-twrp/
Before I started my trying to update my system, my phone was running this ROM from xiaomi.eu community and everything was running good.: xiaomi.eu_multi_MIX4_V13.0.6.0.SKMCNXM_v13-12-fastboot.zip
Newer ROM, I want to install, is this one: xiaomi.eu_multi_MIX4_V13.0.8.0.SKMCNXM_v13-12.zip
but this new ROM can’t be installed simple through fastboot as previous one, so I need to do it in more complicated way (via TWRP):
Steps I did:
1. I did all data backup on external drive.
2. Phone is fully charged.
3. Bootloader is unlocked.
4. USB Debugging and OEM Unlocking allowed
5. Reboot to bootloader
6. Set active B partition through ADB command – “fastboot set_active b”
7. Run TWRP and tried to wipe all the data through WIPE button, but error occurred:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
8. Trying to install TWRP zip file (twrp-installer-3.7.0_11-0-odinx.zip) through TWRP Install button, but this error occurred:
Can you help me, what do I wrong? What step did I miss?
I tried a few alternative ways to solve this problem, but nothing helped and phone acctually can't run android anymore. Only shows fastboot logo and nothing else.
Thank you very much
Lukas

Categories

Resources