I got my redmi note 3 officially unlocked and flashed zcx twrp, but when I tried to flash xiaomi.eu, I deleted the emmc_appsboot.mbn from the rom, it is my mistake. Now my phone cann't start at all.
when I boot into fastboot mode, I can see the bunny but my computer can not find the phone so I can not go to edl mode.
when I turned off the phone and connect it to computer, it shows as 900e instead of 9008 in device manager. I tried the method in http://en.miui.com/thread-274589-1-1.html, but it did not work. Is there anyway I can bring the phone back to live? Thanks.
The only way to save your phone is to flash whole ROM by fastboot ROM.
Following every steps described here and do it carefully: http://en.miui.com/a-234.html
Good luck !
Kris Chen said:
The only way to save your phone is to flash whole ROM by fastboot ROM.
Following every steps described here and do it carefully: http://en.miui.com/a-234.html
Good luck !
Click to expand...
Click to collapse
Thanks, but fastboot does not work on my phone right now.
Hello.
So you can access to fastboot so thats it you just need fastboot to edl command. I actually face the same issue way before and what i did I connect my redmi to pc in fast boot mode and run the command which is in this file.
http://forum.xda-developers.com/and.../guide-how-to-reboot-to-edl-fastboot-t3394292.
Press thank if i help you anyway
Do you know how to make your phone enter fastboot mode ?
1. Power off your phone first
2. Press button of [volume-] + [power] together
If you still cannot enter fastboot mode, that means your phone is dead.
maquechen said:
Thanks, but fastboot does not work on my phone right now.
Click to expand...
Click to collapse
I think you need to open the unit and connect the two points of the battery and it will appear in the device manager 9008. It has tutorials on how to do this.
If your phone able to enter fastboot mode, then you should do:
check your bootloader wether it's locked/unlock. If it's shown locked, try to unlock it using unlock tool.
I am pretty sure your bootloader locked again caused by flashing miui.eu rom without flash lazyflasher afterwards.
If unlock tool can't help you then you need to use reboot to edl app tool and flash it using miflash.
If reboot to edl still can't help, then the safest way is using deep flash cable to unbrick your phone. No need to open your phone to do this.
maquechen said:
Thanks, but fastboot does not work on my phone right now.
Click to expand...
Click to collapse
Mattsantana said:
I think you need to open the unit and connect the two points of the battery and it will appear in the device manager 9008. It has tutorials on how to do this.
Click to expand...
Click to collapse
Thanks, I think so too and already opened the unit. Do you happen to know the exact location of the two points? I found a video about it but it is not very clear.
You can try this
https://www.youtube.com/watch?v=g0xWYvmj4aE
I follow that video and success unbrick my Redmi Note 3.
Pc driver signature enable?
Open cmd
Run in administrator
Type this & enter
bcdedit /set testsigning on
Restart ur pc
Done
Guys I have been trying to unlock the bootloader to install lineage os on my Xiaomi Redmi Note 4. But when I open the Mi Unlock Tool it doesnt recognize the phone in fastboot mode and the I cant press the unlock button. I have tried every precaution and step there is
1) I tried it even by installing developer rom
2)Installed every xiaomi driver and adb drivers. The device shows up when I do the fastboot devices command in platform tools but is not recognized in the unlock tool
3)enabled usb debugging, oem unlocking and linked my mi account to device.
4) Applied for permission and got the approval because i reach the unlock button in the unlock tool even though i didnt get a sms from them saying that i got the permission
5)tried it with another xiaomi phone (Redmi 3s) with all of the above steps nad another laptop still couldnt press the unlock button
6) The only time I was the unlock tool recognized my phone in fastboot and allowed me to press the unlock button was when I installed an older version of The MI Unlock Tool. Even then it got stuck at 50% saying " Couldnt verify device need to update the unlock tool from mi.com/unlock.
Please help me I am really tired of MIUI and its bugs. I have spent hours trying to solve the problem and I simply cant find a solution
Thanks in Advance
There r 3 dots at the top of mi unlock tool press that and there is something called drivers click thst it will scan and if not installed just press thr button it will be installed
I am trying to unlock the bootloader of my ZTE Blade L3 by using "fastboot oem unlock".
As many users, I get an option on my phone to choose yes or no using the volume buttons, but the volume up Button is not working in the fastboot mode.
I already checked:
-the Bootloader IS LOCKED
-the volume up button IS WORKING normaly in the stock recovery and system
-i have installed the correct ADB and fastboot drivers
This Bug is well-known and there is still no solution.
Could anyone help me or did anyone found a work around to unlock the bootloader on MTK devices with the same issue?
This is a goddamn rare phone and it's driving me crazy. I already enabled USB debugging and OEM unlocking, downloaded all of its latest drivers and used Kingroot, Kingoroot and minimal ADB and fastboot console to try and unlock its bootloader (adb reboot bootloader command) and manual bootloader (both volume buttons + power button, which only shows me to the phone's IMEI number), but the stubborn little thing just refuses to open the bootloader.
Any guru out there who can give me insight on how to fix this?
Pleas guys, is there a way to put this device in DIAG MODE or a rom modified to get root without MI account?
int211 said:
Pleas guys, is there a way to put this device in DIAG MODE or a rom modified to get root without MI account?
Click to expand...
Click to collapse
How to enter DIAG Mode and backup IMEI using QPST - Xiaomi Firmware
If you’re looking for a ways on how to enter DIAG Mode and restore / backup IMEI on Xiaomi smartphone here’s a complete guide. Below you’ll find few working methods on how to boot your device in DIAG mode and backup IMEI with Qualcomm Product Support Tools.Advertisement Entering DIAG Mode and...
xiaomifirmware.com
or
*#*#717717#*#*
or
*#*#426#*#*
or
use terminal method (google it)
or youtube
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwjmmb7B6eDyAhWJG-wKHXbtBVIQwqsBegQIBhAB&url=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3D8ZzQPwD7bnE&usg=AOvVaw2rqhhONfY3ZJhbDcDfglYU
please leave a lik or"thanks" button if a method work and tell update on which one worked
I tryed now this way but with no unlock bootloader have failure, I forgot to say the bootloader is locked, its hard
int211 said:
I tryed now this way but with no unlock bootloader have failure, I forgot to say the bootloader is locked, its hard
Click to expand...
Click to collapse
Youve tried unlocking from developer options?
NOTE: I AM NOT IN ANYWAY RESPONSIBLE FOR YOU BRICKING OR DAMAGING YOUR DEVICE, I WILL NOT BE HELD LIABLE FOR YOUR ACTIONS
Steps to unlock the bootloader Xiaomi Redmi Note 10
download and install adb and fastboot tools on pc,
open the folder where you installed adb fastboot tools
go to your phone
Unlock your phone and open the Settings menu.
Go to settings, very bottom system or device info open it
Tap build number several times andl do what must be done to enable developer option
Go to Settings--> System -> Developer Options. You will see a list of special options.
Find the following option: “OEM unlocking. Allow the bootloader to be unlocked”.
Tap on the toggle to enable OEM unlocking.
Enable USB debugging as well in the developer settings
A prompt will come up on your phone and choose always allow this Pc to connect and accept
Options
1
On your Pc ,Go to where you installed adb and fastboot "where the files and app are"
shift + right click empty area and open cmd or powershell here
Type adb reboot bootloader and Hit Enter
or
2
Press and hold the power button. Tap on Power off to turn off the phone.
Connect your phone to your computer using a USB cable.
then
Open CMD/Powershell on your computer, and enter the following command: fastboot devices
If the terminal returns something, it means the computer is successfully communicating with the phone.
Run the unlocking command: fastboot flashing unlock (if this doesnt work google fastboot unlocking commands and try the ones they have there)
The screen of the phone will give you two options once you run the unlocking command. Choose Unlock the bootloader using volume buttons.
Press the Power button to confirm your selection.
your bootloader is now unlocked happy rooting
flairepathos.info said:
Youve tried unlocking from developer options?
NOTE: I AM NOT IN ANYWAY RESPONSIBLE FOR YOU BRICKING OR DAMAGING YOUR DEVICE, I WILL NOT BE HELD LIABLE FOR YOUR ACTIONS
Steps to unlock the bootloader Xiaomi Redmi Note 10
download and install adb and fastboot tools on pc,
open the folder where you installed adb fastboot tools
go to your phone
Unlock your phone and open the Settings menu.
Go to settings, very bottom system or device info open it
Tap build number several times andl do what must be done to enable developer option
Go to Settings--> System -> Developer Options. You will see a list of special options.
Find the following option: “OEM unlocking. Allow the bootloader to be unlocked”.
Tap on the toggle to enable OEM unlocking.
Enable USB debugging as well in the developer settings
A prompt will come up on your phone and choose always allow this Pc to connect and accept
Options
1
On your Pc ,Go to where you installed adb and fastboot "where the files and app are"
shift + right click empty area and open cmd or powershell here
Type adb reboot bootloader and Hit Enter
or
2
Press and hold the power button. Tap on Power off to turn off the phone.
Connect your phone to your computer using a USB cable.
then
Open CMD/Powershell on your computer, and enter the following command: fastboot devices
If the terminal returns something, it means the computer is successfully communicating with the phone.
Run the unlocking command: fastboot flashing unlock (if this doesnt work google fastboot unlocking commands and try the ones they have there)
The screen of the phone will give you two options once you run the unlocking command. Choose Unlock the bootloader using volume buttons.
Press the Power button to confirm your selection.
your bootloader is now unlocked happy rooting
Click to expand...
Click to collapse
That's not a proper unlock bootloader..it is safe unlock bootloader using unlock tools from xiaomi. If you unlock the bootloader to CMD it's a chance to brick. I think the proper to unlock is xiaomi tools
akoaypinoy said:
That's not a proper unlock bootloader..it is safe unlock bootloader using unlock tools from xiaomi. If you unlock the bootloader to CMD it's a chance to brick. I think the proper to unlock is xiaomi tools
Click to expand...
Click to collapse
Both are safe but through fastboot, xiaomi wouldnt know that your mi acccount is linked to an unlocked device
flairepathos.info said:
Both are safe but through fastboot, xiaomi wouldnt know that your mi acccount is linked to an unlocked device
Click to expand...
Click to collapse
Yup. There's a chance if using CMD authenticated issue mi acc
akoaypinoy said:
Yup. There's a chance if using CMD authenticated issue mi acc
Click to expand...
Click to collapse
Well mi unlock tools will be your option to go for them
flairepathos.info said:
Youve tried unlocking from developer options?
NOTE: I AM NOT IN ANYWAY RESPONSIBLE FOR YOU BRICKING OR DAMAGING YOUR DEVICE, I WILL NOT BE HELD LIABLE FOR YOUR ACTIONS
Steps to unlock the bootloader Xiaomi Redmi Note 10
download and install adb and fastboot tools on pc,
open the folder where you installed adb fastboot tools
go to your phone
Unlock your phone and open the Settings menu.
Go to settings, very bottom system or device info open it
Tap build number several times andl do what must be done to enable developer option
Go to Settings--> System -> Developer Options. You will see a list of special options.
Find the following option: “OEM unlocking. Allow the bootloader to be unlocked”.
Tap on the toggle to enable OEM unlocking.
Enable USB debugging as well in the developer settings
A prompt will come up on your phone and choose always allow this Pc to connect and accept
Options
1
On your Pc ,Go to where you installed adb and fastboot "where the files and app are"
shift + right click empty area and open cmd or powershell here
Type adb reboot bootloader and Hit Enter
or
2
Press and hold the power button. Tap on Power off to turn off the phone.
Connect your phone to your computer using a USB cable.
then
Open CMD/Powershell on your computer, and enter the following command: fastboot devices
If the terminal returns something, it means the computer is successfully communicating with the phone.
Run the unlocking command: fastboot flashing unlock (if this doesnt work google fastboot unlocking commands and try the ones they have there)
The screen of the phone will give you two options once you run the unlocking command. Choose Unlock the bootloader using volume buttons.
Press the Power button to confirm your selection.
your bootloader is now unlocked happy rooting
Click to expand...
Click to collapse
At first, tks for all.
I tried to root with your informations but always get the same information, they say I don't have permition to do anything else.
"FAILED (remote: 'Token Verify Failed, Reboot the device')
in fastboot: error: Command failed
in ADB token error still the same.
Some other Idea to try help will be appreciated
Sorry my bad english.
int211 said:
At first, tks for all.
I tried to root with your informations but always get the same information, they say I don't have permition to do anything else.
"FAILED (remote: 'Token Verify Failed, Reboot the device')
in fastboot: error: Command failed
in ADB token error still the same.
Some other Idea to try help will be appreciated
Sorry my bad english.
Click to expand...
Click to collapse
You must unlock bootloader first
Does uypur phone show the authorization popup when you connect for adb and have you allowed always allow this device?
What are you all talking about in this thread?
There is NO WAY to initially unlock the bootloader without MI account, phoning home and waiting 167+hours.
PERIOD. let that sink in.
int211 said:
Pleas guys, is there a way to put this device in DIAG MODE or a rom modified to get root without MI account?
Click to expand...
Click to collapse
Whatever you want to do after that, requires this step before. There is no "root without MI account".