{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sandwich Kernel for J7 2015:-
This kernel works in android 9 to 12L roms, in J700F/H/M only, we will not take any responsibility if anything goes wrong.
Introduction:-
A custom kernel made for J7 2015 AOSP roms.
Sandwich kernel is based on universal exynos 7580 lineage os kernel source.
It aims to improve the overall experience in all aosp based Android 9 to 12L roms.
It has many features, tweaks given as below.
Compatible ROMS:-
ANY ANDROID 9 to 12L AOSP ROMs
Features:-
- Compiled with Linaro Toolchain 7.5 2019/12 (Updated GCC to 7.5)
- Applied Graphite, Ofast, unroll-loops & gcc optimizations
- Removed overclock and reverted back to stock frequencies
- Overclocked GPU from 668mhz to 800mhz
- Tweaked for overall improvement in Battery backup & performance
- Added New CPU governors
° Intelliactive (default)
° ConservativeX
° InteractivePro
° OnDemand (might have reboot issues, untested)
- Added New I/O schedulers
° Noop (default)
° Maple
° Deadline
° CFQ
- Removed sluggish stock dynamic exynos 7580 hotplug and introduced Lazyplug
- Lazyplug hotplug
- Applied Powersuspend hooks in GPU, CPU governors, etc
- Various features from later kernel versions backported (Thanks to LineageOS team)
- Added Latest Wireguard support
- Enabled Simple Low Memory Killer
- Enabled zRAM with Lz0 & Lz4 compression algorithm (Thanks to Danny from LineageOS team)
- Disabled CRC check by default
- fSync toggle
- Boeffla Wakelock Blocker 1.1.0
° Few wakelocks added to the list by default.
- Power efficiency feature by NVIDIA™
- Powersuspend Driver
- fSync Toggle
- Updated fRandom driver (This should increase the speed of random numbers generation)
- NVS hibernation driver
- Tweaked Thermal throttle of GPU
- Tweaked TCP speed (improvement in internet)
- Selected 'westwood' as default TCP congestion algorithm (improve overall internet experience)
- Optimized 'westwood' tcp
- The device will enter the deep sleep more quickly
- Improved CPU load management
- Improved multitasking
- Support F2FS file system (Thanks to J7 LineageOS team)
- SeLinux toggle switch
- LinaroTC optimizations
- Minor Memory leaks fixed
- Total project revamped
- And many underhood optimizations
Installation:-
1) Boot into TWRP
2) Wipe Cache, Dalvik Cache
3) Install the Kernel zip
New update is released, make sure to install the latest version
Latest Build Version: Final
Kernel: Linux 3.10.108
ROM Required: Any Android 9 to 12L AOSP based rom
Download:-
7.11 MB file on MEGA
mega.nz
Source:-
GitHub - AhmadKhan006/SandwichKernel: Customized Kernel made for Samsung Galaxy J700F/H/M with extra features
Customized Kernel made for Samsung Galaxy J700F/H/M with extra features - GitHub - AhmadKhan006/SandwichKernel: Customized Kernel made for Samsung Galaxy J700F/H/M with extra features
github.com
Join Telegram Group for support:-
Project Aqua || Chat Group
A initiative started by Ashwani with other fellow devs that aim in bringing new and amazing ROMs For J7 2015 (J700F/H/M) Official channel: @ashwani_j7 Offtopic Group: @oftopic_j72015csrom Get all Custom Roms here: @j7elte
t.me
Credits:-
- @lineageos for kernel source, and its contributor's
- @danwood76 (Helped me alot, his guidance helped me to achieve this milestone)
- @themagicalmammal (Thanks for his wonderful repo)
- @prashantp01 (Thanks for his wonderful repo)
- @Ashwani_02 (For his love and support, encouragement and for taking J7 community more ahead)
- @ayushrayofficial (For love and support)
- @dariotr (For his wonderful LineageOS for J7)
- @Stricted (For TWRP, contribution in kernel source)
- @arter97 for lazyplug and few commits
- And all of the great members of J7 community
CPU overclock 1.7 GHz ?
I have a question about the boeffla wakelock blocker
Literally can't find any way to use it/an application that isn't malware
No, it will create a thermal throttle mess instead of improvement
I'm stuck on the boot scr said:
CPU overclock 1.7 GHz ?
Click to expand...
Click to collapse
NullCode said:
I have a question about the boeffla wakelock blocker
Literally can't find any way to use it/an application that isn't malware
Click to expand...
Click to collapse
Sir, use a "Kernel Manager"
SandwichEater said:
Sir, use a "Kernel Manager"View attachment 5598641
Click to expand...
Click to collapse
Yes, I have heard about kernel managers, but I don't like to use them and the ones I used didn't have this option
Which manager is this?
NullCode said:
Yes, I have heard about kernel managers, but I don't like to use them and the ones I used didn't have this option
Which manager is this?
Click to expand...
Click to collapse
There are many which display these features:-
- Smartpack Kernel manager
- Kernel Auditor
- HkTweaks (Especially made for exynos SoC)
The one which I am personally using is hKtweaks, you can get it on github, actually all kernel managers available are the fork of old kernel auditor.
SandwichEater said:
There are many which display these features:-
- Smartpack Kernel manager
- Kernel Auditor
- HkTweaks (Especially made for exynos SoC)
The one which I am personally using is hKtweaks, you can get it on github, actually all kernel managers available are the fork of old kernel auditor.
Click to expand...
Click to collapse
isn't HKTweaks only for corsicanu's cronos kernel?
regardless ill still download it, thanks
NullCode said:
isn't HKTweaks only for corsicanu's cronos kernel?
regardless ill still download it, thanks
Click to expand...
Click to collapse
Didn't read the title?
SandwichEater said:
View attachment 5598225
Sandwich Kernel for J7 2015:-
This kernel only works in android 11 roms, in J700F/H/M only, we will not take any responsibility if anything goes wrong.
Introduction:-
Sandwich kernel is based on universal exynos 7580 lineage os kernel source.
It aims to improve the overall experience in all aosp based Android 11 roms.
It has many features, tweaks given as below.
Compatible ROMS:-
ANY ANDROID 11 AOSP ROM
Features:-
- Tweaked for overall improvement in Battery backup & performance
- Added New CPU governors, for each type of tasks
- Added New i/o schedulers, for each type of tasks
- Added Latest Wireguard support
- Enabled Simple Low Memory Killer
- Enabled zRAM with Lz4 compression algorithm (Thanks to Danny from LineageOS team)
- Overclocked GPU from 668mhz to 800mhz
- Disabled CRC check by default
- CRC check control toggle
- fSync toggle
- Boeffla Wakelock Blocker 1.1.0
- Power efficiency feature by NVIDIA™
- PEQT optimizations for CPU
- Tweaked Thermal throttle of GPU
- Tweaked TCP speed (improvement in internet)
- Selected 'westwood' as default TCP congestion algorithm (improve overall internet experience)
- Hotplug optimizations
- Improved CPU load management
- Improved multitasking
- Support F2FS file system (Thanks to J7 LineageOS team)
- SeLinux toggle switch
And many underhood optimizations.......
Installation:-
1) Boot into TWRP
2) Wipe Cache, Dalvik Cache
3) Install the Kernel zip
Kernel OS Version: Android 11
Kernel: Linux 3.10.108
ROM Required: Any Android 11 AOSP based rom
Download:-
7.13 MB file on MEGA
mega.nz
Source which I used:-
GitHub - LineageOS/android_kernel_samsung_universal7580
Contribute to LineageOS/android_kernel_samsung_universal7580 development by creating an account on GitHub.
github.com
Join Telegram Group for support:-
Project Aqua || Chat Group
A initiative started by Ashwani with other fellow devs that aim in bringing new and amazing ROMs For J7 2015 (J700F/H/M) Official channel: @ashwani_j7 Offtopic Group: @oftopic_j72015csrom Get all Custom Roms here: @j7elte
t.me
Credits:-
- @danwood76 (Helped me alot, his guidance helped me to achieve this milestone)
- @themagicalmammal (Thanks for his wonderful repo)
- @prashantp01 (Thanks for his wonderful repo)
- @Ashwani_02 (For his love and support, encouragement and for taking J7 community more ahead)
- @ayushrayofficial (For love and support)
- @dariotr (For his wonderful LineageOS for J7)
- And all of the great members of J7 community
Click to expand...
Click to collapse
worked great thank you for your work on the kernel
3.8I4TT said:
worked great thank you for your work on the kernel
Click to expand...
Click to collapse
I appreciate it, thanks for your feedback, make sure you vote
Thanks for your work.
Can you also provide the kernel source with the modifications? I know you used the universal7580 sources from LOS, but what I'm asking for is the fork along with the things you tweaked/added. If you don't mind, that is.
shrihankp said:
Thanks for your work.
Can you also provide the kernel source with the modifications? I know you used the universal7580 sources from LOS, but what I'm asking for is the fork along with the things you tweaked/added. If you don't mind, that is.
Click to expand...
Click to collapse
Uploading sar, I am busy with my school work and the issue is that you won't come to know what I have commited because I didn't push any of them.
About the tweaks part I have mentioned in credits section from whose repo i took those
Update: I just came to know that it works with android 10 roms also, so you'all can use it in any android 10 rom
shrihankp said:
Thanks for your work.
Can you also provide the kernel source with the modifications? I know you used the universal7580 sources from LOS, but what I'm asking for is the fork along with the things you tweaked/added. If you don't mind, that is.
Click to expand...
Click to collapse
Source out, check the thread
Keep it up boss..congrats for being success in releasing first kernel with very good response..keep it up!!
Ashwani_02 said:
Keep it up boss..congrats for being success in releasing first kernel with very good response..keep it up!!
Click to expand...
Click to collapse
Thanks alot, it means alot for me....
Wow awesome bro!!
Great work!! Really nice!
BTW Do you have Any telegram group for discussing about this kernel?
agent_x69 said:
Wow awesome bro!!
Great work!! Really nice!
BTW Do you have Any telegram group for discussing about this kernel?
Click to expand...
Click to collapse
The link is in the post
New update is up, make sure you'all install the latest version
Related
This kernel is for LG G4 H815 ONLY !!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features :
GoogyMax Kernel for LG Firmwares
- Based on 20A LG MM Sources and synced with V20D source drop
- Updated ramdisk to V20D
- Patched to latest Linux 3.10.96
- Compiled with toolchain gcc Linaro 4.9.3
- Auto-root included
- Busybox included
- ExFAT support
- Dynamic FSync support
- SELinux set to permissive
- A lot of changes and tweaks for better performance & battery life
GoogyMax Kernel for CM13
- Based on latest cyanogenmod kernel sources
- Patched to latest Linux 3.10.96
- Compiled with toolchain gcc Linaro 4.9.3
- ExFAT support
- Dynamic FSync support
- SELinux set to permissive
- A lot of changes and tweaks for better performance & battery life
- MORE TO COME ...
Thanks :
The Beta Team : @FadeFx
- LG : For the code source
- Cyanogenmod : For the source code
- All the talented devs I cherry-picked their commits (Proper credits in my github)
- @qrashers for the Googy-Max Kernel logo & user / betatester signatures
- THE WONDERFUL XDA COMMUNITY !!!
Sources : https://github.com/googyanas/GoogyMax-G4
Signature for users :
Kernel for LG firmware - Downloads & Changelogs
GOOGYMAX KERNEL FOR LG Firmware
[14-FEB] Version 1.7 :
~ all details and credits in github ~
- fs: implement Dynamic FSync 2.0 (thx andip71)
- fs: disabled Async FSync
- various tweaks (mmc - thermal - devfreq - fs writeback)
[05-FEB] Version 1.6 :
~ all details and credits in github ~
- Patched to latest Linux 3.10.96
- cpufreq: cpuboost little tweak for more battery saving
To all GoogyMax kernel users: If you're tempted by disabling logd service to fix battery drain, you should know that it's not necessary with GoogyMax kernel as it was already disabled since some versions ago !
[29-JAN] Version 1.5 :
~ all details and credits in github ~
- fs: Asynchronous Fsync from HTC
- arm64: memory utilities optimization
- various patches to gain more smoothness (cpufreq, block, lowmemorykiller ...)
- Updated ramdisk to V20D
[25-JAN] Version 1.4a :
~ all details and credits in github ~
- Fixed and tested Bluetooth & FM Radio & Exfat
[24-JAN] Version 1.4 :
~ all details and credits in github ~
- WORKING NATIVE EXFAT SUPPORT :good: :good:
- Patched to latest Linux 3.10.95
- Completely disabled ZRAM, ZSMALLOC & SWAP
- random: boost entropy
- wireless: reduce wakelocks by /4
- gcc: tune flag for big.Little architecture
[22-JAN] Version 1.3 :
~ all details and credits in github ~
- Synced with LG v20d source drop :good: :good:
- Some patches to reduce lags & improve battery life (cpufreq, thermal)
- cpufreq: disable cpufreq_waver (removed anyway by v20d)
- devfreq: Use high priority workqueue
- arm64: add seccomp support
- arm64: add ARM64_ERRATUM_843419
- arm64: add support ARCH_SUPPORTS_ATOMIC_RMW
- mm: increase VM_MIN_READAHEAD from 16 to 32
[28-DEC] Version 1.2 :
~ all details and credits in github ~
- finally fixed MM lags and slowdowns ( + back to same battery life as with lollipop !!! ) :good: :good: :good:
- fs: hopefully fixed exFat support
NO MORE NEED TO DOWNGRADE TO LOLLIPOP !!! ( at least for me )
[24-DEC] Version 1.1 :
~ all details and credits in github ~
- block: update bfq to v7r8 and made it default scheduler
- fs: add exFat support
- sched: enable autogroup
- defconfig: disable ZRAM completely
- cpufreq: Introduce new relation for freq selection
- cpufreq: tune cpu & gpu target load values
- defconfig: include all tcp congestion modes
- defconfig: (experimental) enable display DFPS & VSYNC_SKIP
[14-DEC] Version 1.0 :
~ all details and credits in github ~
- Based on 20A LG MM Sources
- Patched to latest Linux 3.10.94
- Compiled with toolchain gcc Linaro 4.9.3
- Auto-root included
- Busybox included
- SELinux set to permissive
- A lot of changes and tweaks for better performance & battery life
PLEASE DO NOT MIRROR !!!
Kernel for CM13 - Downloads & Changelogs
GOOGYMAX KERNEL FOR CM13
[18-FEB] Version 1.7.1a :
~ all details and credits in github ~
- fixed flashlight button disappearing from notification drawer
[16-FEB] Version 1.7.1 :
~ all details and credits in github ~
- updates from lg v20d source (time - sched - soc - camera_v2 - leds - thermal - clk - hwmon - dts ...)
- some minor tweaks
[14-FEB] Version 1.7 :
~ all details and credits in github ~
- fs: implement Dynamic FSync 2.0 (thx andip71)
- fs: disabled Async FSync
- various tweaks (mmc - thermal - devfreq - fs writeback)
- updated ramdisk to 14feb build
[05-FEB] Version 1.6 :
~ all details and credits in github ~
- Based on latest cyanogenmod kernel sources
- Patched to Linux 3.10.96
- Synced with GoogyMax 1.6 (all patches and tweaks included)
PLEASE DO NOT MIRROR !!!
thanks . but flash how? twrp and that all? wipe something after? etc etc
shudoha said:
thanks . but flash how? twrp and that all? wipe something after? etc etc
Click to expand...
Click to collapse
It's a zip flashable via twrp. No wipe needed. Just flash and enjoy
Envoyé de mon LG-H815
Happy to see you here friend, excellent news!!! I will test it. Any project to make an AOSP kernel?
Thanks a lot
sayou94 said:
Happy to see you here friend, excellent news!!! I will test it. Any project to make an AOSP kernel?
Thanks a lot
Click to expand...
Click to collapse
We got there already? [emoji14] Surely aosp kernel will come but only when cm13 is mature enough.
Envoyé de mon LG-H815
googy_anas said:
We got there already? [emoji14] Surely aosp kernel will come but only when cm13 is mature enough.
Envoyé de mon LG-H815
Click to expand...
Click to collapse
Thanks friend, I want to flash AOSP rom but i need a solid custom kernel for it. I used your kernel for the note 4 and it was excellent!!!!
Hey googy: Noticed a bug with my external sd-card. Don't know how the phone is formatting the sd-card, but even formatting several times, it won't get recognized. Default kernel is fine. Guess, it will get formatted as exFAT and maybe you (currently) don't have exFAT included? Am I right?
Thanks anyways for your time and all the things in the past. I really appreciate your work.
P.S.: Don't mind my signature. I am on 20B .
Hey welcome here. I used your kernel on sgs3
:good: cheers
MickyFoley said:
Hey googy: Noticed a bug with my external sd-card. Don't know how the phone is formatting the sd-card, but even formatting several times, it won't get recognized. Default kernel is fine. Guess, it will get formatted as exFAT and maybe you (currently) don't have exFAT included? Am I right?
Thanks anyways for your time and all the things in the past. I really appreciate your work.
P.S.: Don't mind my signature. I am on 20B .
Click to expand...
Click to collapse
Thanks for taking the time to try the kernel.
Exfat isn't included yet but is planned for next release
Envoyé de mon LG-H815
Excuse me guys, please re-download 1.0 version as I just corrected a little problem affecting some modules loading (mainly bluetooth ...)
Another kernel wow thank you!
Future come faux sound support?.
Would this work on a Lollipop based ROM at all? Or does it have to be MM?
Adam86 said:
Would this work on a Lollipop based ROM at all? Or does it have to be MM?
Click to expand...
Click to collapse
Considering the sources are 20A which is MM, there's your answer
Trying it out but gives to much battery drain.
Will wait for a new release more optimized and with more features.
Keep the good work.
patalao said:
Trying it out but gives to much battery drain.
Will wait for a new release more optimized and with more features.
Keep the good work.
Click to expand...
Click to collapse
Sorry to hear that, but I am getting opposite results as my battery lasts noticeably longer with same usage.
Please check your init scripts or tweaks and consider checking after at least one charge cycle
Envoyé de mon LG-H815
I`m using Genisys 3.4 with superxe kernel,with no scripts and the only mods are greenify,powernap.
I just installed your kernel and wiped cache and dalvik.
But i`ll give it another try on your next update.
Thanks for bringing another kernel for our phones.
Actually @BySezerSimsek in Genisys Rom uses LS scripts. They are from L SPEED. I am using the same firmware.
I know, but I deleted them all
This kernel is for Note5 N920C ONLY !!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features :
GoogyMax Kernel for TouchWiz MM 6.0.x Firmwares
- Based on N920CXXU2BPB6 Sources & synced with N920CXXU2BPCD source drop
- Updated ramdisk to XXU2BPB6
- Patched to latest Linux 3.10.101
- Compiled with toolchain gcc 6.1.1
- Auto-root included
- SELinux set to permissive
- A lot of changes and tweaks for better performance & battery life
- CPU voltage control
- CPU UnderClock & OverClock
- GPU voltage control
- GPU OverClock
- Devfreq voltage control
- Input booster control
- Charge control
- Sound control
- Thermal control
- Sensorhub wakelock control
- Wifi wakelock control
- Powersuspend driver
- Joysticks support
- Added ntfs, nfs, cifs support
- DriveDroid usb support
- SYNAPSE support (to be installed from Play Store) with various Cortexbrain services
- MORE TO COME ...
Thanks :
The Beta Team : @Ather
- Samsung : For the code source
- All the talented devs I cherry-picked their commits (Proper credits in my github) especially @AndreiLux & @UpInTheAir & @thehacker911
- @qrashers for the Googy-Max Kernel logo & user / betatester signatures
- THE WONDERFUL XDA COMMUNITY !!!
Sources : https://github.com/googyanas/GoogyMax-N5
Signature for users :
XDA:DevDB Information
[KERNEL] (29-MAY) GoogyMax-N5 1.4 [TW MM] (Linux 3.10.101 / GCC 6.1.1), Kernel for the Samsung Galaxy Note 5
Contributors
googy_anas
Source Code: https://github.com/googyanas/GoogyMax-N5
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.4
Stable Release Date: 2016-05-29
Created 2016-03-02
Last Updated 2016-06-05
GOOGYMAX KERNEL FOR TouchWiz MM Firmwares
[29-MAY] Version 1.4 :
~ all details and credits in github ~
- Compiled with aarch64 gcc 6.1.1
- Added cpu voltage control
- Added gpu voltage control
- Added devreq voltage control
- Added input booster control
- Added charge control
- Added sound control
- Added thermal control
- Added sensorhub wakelock control
- Added wifi wakelock control
- Added powersuspend driver
- Added joysticks support
- Added ntfs, nfs, cifs support
- arm64: improved power efficiency
- gpu: pushed max freq to 852MHz
- cpu: little cores: UC to 300MHz and OC to 1.7GHz
- cpu: big cores: UC to 60MHz and OC to 2.3GHz
- DriveDroid usb support
- various tweaks (cpufreq, sched, ...)
- sched: enabled HMP_LITTLE_PACKING
- added SYSNAPSE support (to be installed from Play Store) with various Cortexbrain services
As usual, all credits are on github but I need to infinitely thank @AndreiLux & @UpInTheAir & @thehacker911 as most of what was added comes from their repos !
[14-MAY] Version 1.3 :
~ all details and credits in github ~
- Sync with N920CXXU2BPCD source drop
- gpu: Smoothen GPU throttling levels
- tcp: tweak for speed
- arm64: Improve power efficiency
- various cpufreq & sched patches/tweaks
- ramdisk: removed csc and mixer gains to avoid conflicts with custom roms ( moved to flashable Googys_Goodies.zip in post #3 )
Hi dear GoogyMax-N5 users, it seems like it isn't easy to turn the back to the Note5 !!!
[31-MAR] Version 1.2 :
~ all details and credits in github ~
- Patched to 3.10.101
- crypto: crc32 - Add ARM64 CRC32 hw accelerated module
- defconfig: enable swap readahead
- defconfig: disable a lot of debugging
Sorry dear GoogyMax-N5 users, this is my last build as I don't have Note5 anymore !!! A big thank to you all, especially @Ather
[13-MAR] Version 1.1 :
~ all details and credits in github ~
- Patched to 3.10.100
- gpu: some updates mali r7p0 from S7 G935F (not to confound with "always on display")
- arm64: enable hotplug thread stop feature
- sched: Implement lockless wake-queues
- Drivers: sensorhub: reduce wakelock time
- A lot of various changes and tweaks for better performance & battery life (arm64, binder, topology, cpufreq, sched, mm ...)
- Activated CSC features : Native Call Recording, Call button in history, unlimited linked contacts, camera wwhile in call, disable keyboard input choice, ...
- Modded mixer_gains for higher speaker volume
Expect increased smoothness and battery life. Please report about your experience !!!
[02-MAR] Version 1.0 :
~ all details and credits in github ~
- Based on N920CXXU2BPB6 Sources
- Updated ramdisk to XXU2BPB6
- Patched to latest Linux 3.10.98
- Compiled with toolchain gcc Linaro 5.3.1
- Auto-root included
- SELinux set to permissive
- A lot of changes and tweaks for better performance & battery life
PS: it is version 1.0 and should be considered as 1.0 ! Let's forget now the fancy shiny tricky superb features that "should" be added AND let's enjoy the wonderful Note5 as it "should" be (while being powered by GoogyMax) !!!
PLEASE DO NOT RE-UPLOAD !
Googy's Goodies
Googy's Goodies :
- Activated CSC features : Native Call Recording, Call button in history, unlimited linked contacts, camera while in call, disable keyboard input choice, ...
- Modded mixer_gains for higher speaker volume
nice ill flash it
Welcome mate, You did a great job in N4, can't wait to try it on N5. Thanks for your love to our N5. Way to go (Y)
Welcome mate
Thanks for welcoming messages ... Actually facing problem uploading to download section... ?
i was honored to test the kernel, enjoyed your work on the Note4 and missed it
Welcome!
Great to see you here! I enjoyed your kernel on the S4! :good:
[02-MAR] Version 1.0 :
~ all details and credits in github ~
- Based on N920CXXU2BPB6 Sources
- Updated ramdisk to XXU2BPB6
- Patched to latest Linux 3.10.98
- Compiled with toolchain gcc Linaro 5.3.1
- Auto-root included
- SELinux set to permissive
- A lot of changes and tweaks for better performance & battery life
FINALLY UPLOADED ... HAVE FUN !!!
PS: it is version 1.0 and should be considered as 1.0 ! Let's forget now the fancy shiny tricky superb features that "should" be added AND let's enjoy the wonderful Note5 as it "should" be (while being powered by GoogyMax) !!!
Will there be synapse or KA support? I would be very happy with KA
It contains deep sleep fix?
Derpling said:
It contains deep sleep fix?
Click to expand...
Click to collapse
see attached
So far, it seems like the kernel is running mighty good. No slowdown or anything. Will keep posted thanks again!
Sent from my SM-N920C using Tapatalk
osmosizzz said:
So far, it seems like the kernel is running mighty good. No slowdown or anything. Will keep posted thanks again!
Sent from my SM-N920C using Tapatalk
Click to expand...
Click to collapse
Glad you like it!
Envoyé de mon SM-N920C en utilisant Tapatalk
googy_anas said:
Glad you like it!
Envoyé de mon SM-N920C en utilisant Tapatalk
Click to expand...
Click to collapse
Welcome to note5 development community my brother
I was having note 4 and googy max 1.4 but now I sold it and get note5 let's playing with new kernel my old note4 was cold with games thanks for your kernel
Don't sell n5 please keep it updated
شكرااا حبيبي
Best kernel for galaxy s4...hope to support N920K
Hi and happy for your work
Does support N920CD. ??
It has the same firmware
But two sim functionality
Hello, will it work in the N920G ?
Phyzicx said:
Hello, will it work in the N920G ?
Click to expand...
Click to collapse
Read first post
"This kernel is for Note5 N920C ONLY !!!"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unofficial DorimanX builds by GreekDragon(The resurrection of jellybean kernels)
Dorimanx JB unofficial kernel by GreekDragon
The Background:
DorimanX development has stopped for a while now. I've been a long term dorimanx user, but I felt that a lot of features need to be implemented into the kernel. As of a result, I decided to make my own personal builds! Please note that I'm no way as good as the master himself, Dorimanx, but I try to implement features to the best of my abilities. Also, I'm not going to be a proper maintainer of dorimanx kernel, this is just what I've done in my spare time.
This is a fork from Dorimanx's git.
If you have problems or if anything goes wrong, you can flash latest build by Computoncio
You can download from his official website:
http://dorimanx.casoncia.org/
The Mission:
To continue giving support for the much loved kernel. New features and additions will be added to improve flexibility and speed to the already amazing kernel. My goal is to improve DorimanX kernel as much as I can, without sacrificing stability.
4.1.X JELLYBEAN ONLY!
DISCLAIMER:
I'm not responsible for bricked devices or wrong version flashing
You are using this kernel at your own responsibility
——— !!!!!!!! YOU HAVE BEEN WARNED !!!!!!!! ———
FEATURES:
This kernel includes the following additional features over stock dorimanX kernel:
- CPU Governors: HYPER, Ondemand, pegasusQ, Intellidemand, neoX, darkness, nightmare, sleepy, conservative (Default: HYPER)
- TCP Algorithms: Cubic, Reno, BIC, Westwood, Highspeed, Hybla, HTCP, Vegas, Veno, Scalable, Lp, Yeah, Illinois (Default: Westwood)
- FPBug/Musicbug fix is already included in this kernel!
- BLN and BLNWW support
- Updated Linux Kernel version to 3.15.0 stable!
- IO Schedulers: ROW, FIOPS, SIO, BFQ, CFQ, Noop, ZEN, Deadline (Default: SIO)
- Trim support
THINGS I WILL NOT ADD:
Code:
- LZ4 Compression (Our Boot partition is way too small to support this)
- Useless CPU governors such as Userspace
- Colour tuning support (Unless someone helps me with this)
- Recovery version (WIll only consider doing this if working on LP kernel)
- Higher thermal limits (We all know what happens if we do this)
- Higher overclocking/Lower underclocking capabilities (So you want less stability and more SODs?)
- Synapse support (Stweaks is the only app that can fully support this kernel)
CREDITS:
Dorimanx (the real master of the kernel)
Gokhanmoral (Siyah Kernel)
Voku1987(This Kernel)
Alucard_24(This Kernel)
STANTRC(This Kernel)
Entropy512 (CyanogenMod)
Tungstwenty (On screen gestures addon)
Torvalds (Kernel 3.6.Y maintainer)
Computoncio (This Kernel)
cybernetus (This Kernel)
stelistcristi (Contents of this post)
chhapil (For helping me with all of the issues, thanks man)
Chet Kener (For UBER toolchain)
Lanchon (For TRIM fix)
Zeitferne (For FP Bug/Music Bug fix)
gsstudios (For his help and his thread template)
DOWNLOAD:
Siyah-Dorimanx-V8.70-JB-SGII-PWR-CORE-DRAGON-TRIM.zip
AndroidFileHost Download Folder
CHANGELOG:
Refer to second post
KERNEL SOURCE:
Source code of the kernel can be found here:
https://github.com/dragonGR/Dorimanx-SG2-I9100-Kernel
https://github.com/dragonGR/initramfs3
ISSUES:
- All dorimanx bugs
USEFUL LINKS
- CPU Governor and I/O Scheduler Guide
- DorimanX tuning guide
TCP Algorithm guide
XDA:DevDB Information
DorimanX JB by GreekDragon, Kernel for the Samsung Galaxy S II
Contributors
GreekDragon, chhapil
Source Code: https://github.com/dragonGR/Dorimanx-SG2-I9100-Kernel
Kernel Special Features:
Version Information
Status: Stable
Created 2016-07-15
Last Updated 2016-12-03
Changelogs:
--RELEASED VERSIONS --
Code:
[B]DorimanX 8.70 (STABLE) [/B]
- Massive update -
- Upstream & Security fixes -
- Stability improved -
- Switched to gsstudio's fork -
Reserved
Welcome to the team
@Lysergic Acid @gsstudios , @arnab , @GreekDragon @Trafalgar Square ..... and i missed many but what a Team on I9100 again
thanks to all to continue to maintain our device with a so high level of development !
Troubadour666 said:
@Lysergic Acid @gsstudios , @arnab , @GreekDragon @Trafalgar Square ..... and i missed many but what a Team on I9100 again
thanks to all to continue to maintain our device with a so high level of development !
Click to expand...
Click to collapse
After 5 years, s2 is still alive and kicking. I guess is a zombie now.
Its work
Do you have any profile between battery/stability/games
I am here
xn0live said:
Its work
Do you have any profile between battery/stability/games
Click to expand...
Click to collapse
I don't want to touch profiles because i know i will screw up there.
Trafalgar Square said:
I am here
Click to expand...
Click to collapse
Of course you are here.
I'm testing a new v8.52. I added IsoRec and some other things, if everything is good, i will release it.
Have you pulled the fix for package parsing error in JB?
As I mentioned to you I'm not able to keep up these days due to me professional commitment, so your contribution to JB branch is a welcome change. Thanks for that
I have one concern over how the Dorimanx kernel development is heading.
Already the JB vs KK, MM code is now much fragmented, I was trying to my best to bring JB much closer to the current branches but not fully.
I would like to know your views on this
chhapil said:
Have you pulled the fix for package parsing error in JB?
As I mentioned to you I'm not able to keep up these days due to me professional commitment, so your contribution to JB branch is a welcome change. Thanks for that
I have one concern over how the Dorimanx kernel development is heading.
Already the JB vs KK, MM code is now much fragmented, I was trying to my best to bring JB much closer to the current branches but not fully.
I would like to know your views on this
Click to expand...
Click to collapse
Fragmentation was going to happen sooner or later, especially with all those changes required just to get MM working.
I will help with JB development when I have free time alongside GreekDragon. LP and MM will and always be my primary focus (until new android versions come out)
gsstudios
Could you explain why there's dorimanx.zip file inside the kernel file
Was it a mistake or you compiled two different kernels?
gsstudios said:
Fragmentation was going to happen sooner or later, especially with all those changes required just to get MM working.
I will help with JB development when I have free time alongside GreekDragon. LP and MM will and always be my primary focus (until new android versions come out)
gsstudios
Click to expand...
Click to collapse
May be my expectations would be wrong, apart from Mali code, rest of the code should be almost same.
Even the WiFi driver has become totally open source now but it's not merged to JB branch fully.
Lot of pieces related to net, scheduling are also different.
I guess since Dorimanx and computino's days it has started bifercating.
I hope we can bring it together
Always if my mobile is off(screen off) and i get a whatsapp message my phone wake up
where is the option, where i can disabled it?
BLN is off
and what does it mean if a person say i am using " cpu grpup 2 or cpu group 3" where is the setting for that
chhapil said:
Have you pulled the fix for package parsing error in JB?
As I mentioned to you I'm not able to keep up these days due to me professional commitment, so your contribution to JB branch is a welcome change. Thanks for that
I have one concern over how the Dorimanx kernel development is heading.
Already the JB vs KK, MM code is now much fragmented, I was trying to my best to bring JB much closer to the current branches but not fully.
I would like to know your views on this
Click to expand...
Click to collapse
Yeah, i'm testing it along with some other things.
I have something in my mind. If everything is ok, JB kernel will be closer to LP one. Not sure if you get me.
gsstudios said:
Fragmentation was going to happen sooner or later, especially with all those changes required just to get MM working.
I will help with JB development when I have free time alongside GreekDragon. LP and MM will and always be my primary focus (until new android versions come out)
gsstudios
Click to expand...
Click to collapse
Thanks again.
Thanks.
Muhammadsoli said:
Could you explain why there's dorimanx.zip file inside the kernel file
Was it a mistake or you compiled two different kernels?
Click to expand...
Click to collapse
Is a mistake.
chhapil said:
May be my expectations would be wrong, apart from Mali code, rest of the code should be almost same.
Even the WiFi driver has become totally open source now but it's not merged to JB branch fully.
Lot of pieces related to net, scheduling are also different.
I guess since Dorimanx and computino's days it has started bifercating.
I hope we can bring it together
Click to expand...
Click to collapse
WIFI Drivers is stable on JB.. correct me if i'm wrong, but why to update the drivers when the one from JB works great?
xn0live said:
Always if my mobile is off(screen off) and i get a whatsapp message my phone wake up
where is the option, where i can disabled it?
BLN is off
and what does it mean if a person say i am using " cpu grpup 2 or cpu group 3" where is the setting for that
Click to expand...
Click to collapse
What do you mean?
About cpu group, is on STweaks and specifically in CPU-Voltages tab.
Dorimanx v8.55 is up!
Changelogs:
- Added IsoRec
- Kernel is now 3.15
- Removed zzmanX
- Added zzmoove
- Removed Powersave governor
- Removed Perfomance governor
- Removed VR and FIFO schedulers
- Enabled other flags for FIOPS
- Updated SuperSU to v2.46
- Fixed permissions for power efficient workqueues parameter
- Fixed parsing package error
- Synced chhapil's zram updates
- Set lz4 as the default algorithm for zram
- Merged almost all fixes from zzmoove develop branch.
- Added tcp algorithm changing support and set westwood as the default
- Governors Updated
- Tuned IO schedulers
- Fixed some memory corruptions
- Sync IO scheduler changes with KK branch
- Fixed some leaks
- Applied some security updates
- Added PE workqueue control
- Added TCP algorithm changing support to stweaks
- Initial support for software CRC toggle
Downloads
AFH: https://www.androidfilehost.com/?fid=24591000424948196
Github(mirror):https://github.com/dragonGR/Dorimanx-SG2-I9100-Kernel/releases/tag/v8.55-stable
Found some issues
Stweaks always detects a value been changed, I think your profiles are out of sync
Trim is not working properly, phone hangs while trimming, check the discard option in fstab in initramfs
Overall deep sleep is good, resume is faster after screen off state
:good:
chhapil said:
Found some issues
Stweaks always detects a value been changed, I think your profiles are out of sync
Trim is not working properly, phone hangs while trimming, check the discard option in fstab in initramfs
Overall deep sleep is good, resume is faster after screen off state
:good:
Click to expand...
Click to collapse
TRIM works fine here. And i have affected chip if that matters.
About Stweaks, i think i know the problem. Testing.
Resume is faster indeed.
I flash the 2 version
the kernel is not very stable, its freeze almost
xn0live said:
I flash the 2 version
the kernel is not very stable, its freeze almost
Click to expand...
Click to collapse
No freeze for me. All is good. @chhapil you faced freeze?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction
Oxygen Kernel is based on stock Samsung source code taken from Samsung Opensource Release Center with sole aim to provide better performance, stablity and battery backup than stock kernel. A kernel tells the hardware in your Android device how to behave, kind of like your mommy tells you how to behave. You can modify how fast your processor runs by over or under clocking it or optimize your system for battery life.
Oxygen Kernel is always up-to-date with latest patches from kernel.org
Known for maximum stability and smooth performance
All the Source Code is available on github
Kernel Info
LINUX: 3.18.131
SAFETYNET: Green
SELINUX: Permissive
TOOLCHAIN: Google's GCC 4.9
Compatible ROMS
All Touchwiz 8.0+ ROMs
Features
Here are the major features of the kernel (feel free to explore Github)
Up to date with the latest stable Linux version
Full -Ofast build with graphite optimisations
Removed a lot of useless debug and logging options
Disabled TIMA, KNOX, DM-VERITY,etc
Awesome battery life and smooth performance
ARM enhanced performance patches
Overclock CPU up-to 1.7GHz and GPU up-to 1146MHz
GPU Voltage Control
CPU Governors: conservative, interactive, ondemand, performance, powersave, userspace (default: interactive)
I/O Schedulers: bfq, cfq, deadline, maple, noop (default: maple)
Powersuspend and State Notifier drivers
Dynamic FSync, FS fsync toggle on/off
Frandom driver for 10-50x faster random number generation
Spectrum Support (a simple, profile based kernel manager || now integrated into Oxygen Control)
Disabled CRCs by default for 30% performance boost
CDROM emulation on mass_storage (compatible with DriveDroid)
Wireguard support
Boeffla Wakelock Blocker
Oxygen Control App Features
Full CPU and GPU Control
Boeffla Wakelock Blocker
Spectrum Support
Samsung Hotplug
CRC Control
And many more!
These features are only available through Oxygen Control App
Download Oxygen Control from Github Releases
Warning: If you come from some other custom kernel or have any issues, you should dirty flash your ROM before flashing Oxygen Kernel to avoid problems.
Reflash ROM -> Flash Oxygen Kernel --> Flash Magisk if you want to root
If you are upgrading between Oxygen Kernel versions, just flash the kernel zip. Also uninstall or clean data of any kernel control app you're using.
Going back to stock: You can backup your boot.img with TWRP before flashing Oxygen Kernel and restore the backup whenever you want to revert.
This kernel removes forced encryption, if you face "encryption process failed" error upon reboot then you need to format /data. This is generally needed if you are installing this kernel on stock tw rom
Downloads
Kernel
Download
Oxygen Control
Download
Telegram Group
Join Oxygen Kernel Community group on Telegram here
Join Oxygen Kernel Channel on Telegram here
If you like my work donations are always welcome
Google Pay UPI ID: [email protected]
Paypal: https://paypal.me/SiddhantNaik
Don't forget to hit the thanks button, it's free.
Credits
Samsung Open Source Center for the Source code
@SolarX_dev for numerous help and support
@osm0sis for AnyKernel2
@jesec for Fingerprint Fix
@morogoku for MTweaks
Everyone others from whom i have picked commits (credited on Github)
All those who test my builds before release
XDA:DevDB Information
Oxygen Kernel A6, Kernel for the Samsung Galaxy A6
Contributors
DarkLord1731
Source Code: https://github.com/DarkLord1731/a6lte
Kernel Special Features:
Version Information
Status: No Longer Updated
Current Stable Version: 1.0.131
Stable Release Date: 2019-01-13
Created 2019-01-13
Last Updated 2019-08-11
Changelogs:
Oxygen Kernel v1.0.131
Initial Build
Reserved
Nice Buddy
Can I use it on Samsung Galaxy A6 plus?
francuz1988 said:
Can I use it on Samsung Galaxy A6 plus?
Click to expand...
Click to collapse
No only exynos7870 based A6 models are supported
DarkLord1731 said:
Introduction
Oxygen Kernel is based on stock Samsung source code taken from Samsung Opensource Release Center with sole aim to provide better performance, stablity and battery backup than stock kernel. A kernel tells the hardware in your Android device how to behave, kind of like your mommy tells you how to behave. You can modify how fast your processor runs by over or under clocking it or optimize your system for battery life.
Oxygen Kernel is always up-to-date with latest patches from kernel.org
All the Source Code is available on github
Kernel Info
LINUX:3.18.131
SELINUXermissive
All Touchwiz 8.0+ ROMs
Features
Here are the major features of the kernel (feel free to explore Github)
Up to date with the latest stable Linux version
Removed a lot of useless debug and logging options
Awesome battery life and smooth performance
Overclock CPU up-to 1.7GHz and GPU up-to 1146MHz
CPU Governors: conservative, interactive, ondemand, performance, powersave, userspace (default: interactive)
Powersuspend and State Notifier drivers
Frandom driver for 10-50x faster random number generation
Disabled CRCs by default for 30% performance boost
Wireguard support
Full CPU and GPU Control
Spectrum Support
CRC Control
And many more!
These features are only available through Oxygen Control App
Download Oxygen Control fromGithub Releases
Warning: If you come from some other custom kernel or have any issues, you should dirty flash your ROM before flashing Oxygen Kernel to avoid problems.
Reflash ROM -> Flash Oxygen Kernel --> Flash Magisk if you want to root
If you are upgrading between Oxygen Kernel versions, just flash the kernel zip. Also uninstall or clean data of any kernel control app you're using.
Going back to stock: You can backup your boot.img with TWRP before flashing Oxygen Kernel and restore the backup whenever you want to revert.
This kernel removes forced encryption, if you face "encryption process failed" error upon reboot then you need to format /data. This is generally needed if you are installing this kernel on stock tw rom
Downloads
Kernel
Download
Oxygen Control
Download
Telegram Group
Join Oxygen Kernel Community group on Telegram here
Join Oxygen Kernel Channel on Telegram here
If you like my work donations are always welcome
Google Pay UPI ID: [email protected]
Paypal:https://paypal.me/SiddhantNaik
Don't forget to hit the thanks button, it's free.
Credits
Samsung Open Source Center for the Source code
@osm0sis for AnyKernel2
@morogoku for MTweaks
All those who test my builds before release
XDA:DevDB Information
Oxygen Kernel A6, Kernel for the Samsung Galaxy A6
Contributors
DarkLord1731
Source Code:https://github.com/DarkLord1731/a6lte
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.0.131
Stable Release Date: 2019-01-13
Created 2019-01-13
Last Updated 2019-01-13
Click to expand...
Click to collapse
good job:good:
Thamk you for this sir! ? From my J7 Prime to my A6 ?????
Has anyone tried this already? I would love to try this but my RMM is still prenormal though. I need feedback from other users too. ?
Hi, this can work on a Sm-A605gn? Im lookong something for having SeLinux Permissive, and also, something to compile a Kernel that supports HiD Interface for using Kali. But this kernel's things its always a mess when you try Kali on a Samsung
Shonenbeat said:
Hi, this can work on a Sm-A605gn? Im lookong something for having SeLinux Permissive, and also, something to compile a Kernel that supports HiD Interface for using Kali. But this kernel's things its always a mess when you try Kali on a Samsung
Click to expand...
Click to collapse
This kernel is only for A6 (exynos7870)
Rom for Galaxy A6
Do you have a Rom I can use with the Kernel you created? I've been having trouble finding a capatible Rom for my GALAXY A600
Download zip
Hello,
Excuse me, i don't understand how to download the zip of the kernel
Somebody can tell me how to do?
Thanks
Did someone try this already?
BiHanCummings said:
Do you have a Rom I can use with the Kernel you created? I've been having trouble finding a capatible Rom for my GALAXY A600
Click to expand...
Click to collapse
It should work on any TW oreo ROMs.
marcdu30 said:
Hello,
Excuse me, i don't understand how to download the zip of the kernel
Somebody can tell me how to do?
Thanks
Click to expand...
Click to collapse
Open the download link, select TW or AOSP builds, select the latest version and download. (If downloading from mobile phone u need to click on "download anyways" option when sohrceforge page says "Software downloads are incompatible on this device"
:good:
Hello, I would like to get Ethernet support of the phone. Is it supported on your ROM ?
---------- Post added at 07:59 AM ---------- Previous post was at 07:44 AM ----------
I have another question for you. I'm looking for a ROM that will support voice call over ethernet. In short, VoWi-Fi and VoLTE are IPSEC tunnels to the provider. It should work on Ethernet but all dialer are checking first if Wi-Fi or LTE is enabled before making the call. What I don't know: Is it simply related to the dialer (calling app) replacement or to the ROM itself.
Thank you for helping.
Any plans to do a kernel with Pie (9.0) support?
henok.gk said:
Any plans to do a kernel with Pie (9.0) support?
Click to expand...
Click to collapse
Yes once Samsung releases the updated pie kernel source
Shonenbeat said:
Hi, this can work on a Sm-A605gn? Im lookong something for having SeLinux Permissive, and also, something to compile a Kernel that supports HiD Interface for using Kali. But this kernel's things its always a mess when you try Kali on a Samsung
Click to expand...
Click to collapse
I have a Selinux Permissive for SM-A605G but I am not sure that NFC will work and this kernel work with Pie
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Why simple kernel?
- The simple kernel is a highly optimized aftermarket kernel for the Xiaomi Snapdragon 845 series of devices. This includes the Mi 8, Mi Mix 2s, and Poco F1.
- Also, the kernel receives at minimum monthly updates, sometimes even weekly, and is thoroughly tested by myself and a select group of individuals who also contribute to the project.
Features :
- Based on latest android 10 caf tag
- Google common for Q merged
- F2fs stable merged
- Rapid GC for f2fs
- PELT (per entity load tracking) backported from Android-Mainline
- RCU (read copy update) backported from Android-Mainline
- Vnswap and Zswap
- Highly optimized memory allocation
- Boeffla wakelock blocker
- Highly optimized deep sleep and idle drain (usually 0% overnight)
- Sound control
- Latest drivers and update source from mi-opensource
- Compiled with Clang 10.0.0 and LLVM polyhedral loop optimization
How to install and compatability:
- This kernel only supports android Q aosp roms
- Flash zip in a recovery of your choice (twrp is recommended)
- Flash magisk (optional)
- Reboot and experience the simplicity
If you appreciate my work and want to help me stay awake click here to buy me a coffee
Downloads:
https://github.com/ethan-halsall/Simple-Kernel/releases
XDA:DevDB Information
[KERNEL][10.0] Simple kernel, Kernel for the Xiaomi Poco F1
Contributors
oipr
Kernel Special Features:
Version Information
Status: Stable
Created 2019-03-03
Last Updated 2020-06-24
Reserved
Simple Kernel Ten r2.0-
Changelog:
- Upstream to 4.9.228
- Upstreamed f2fs
- Enabled Vnswap and Zswap for less overhead and better page swapping
- Disable Zram
- Merged LE.UM.2.3.2-10400-SDX24 and LA.UM.8.3.r1-07900-sdm845.0
- Decreased swappiness to 20 - for optimum swapping
- Wireless / db.txt: Checkout to upstream wireless-regdb
- Updated Simple LMK
- Inlined scheduler further with android-mainline
- Fixed Ion allocation bug (causing Gcam crash)
- Disabled readahead for faster app opening and less overhead
Download: https://github.com/ethan-halsall/Simple-Kernel/releases
If you appreciate my work and want to support me click here https://www.paypal.me/ethanhalsall
Thanks
Simple things are great things
thanks dev
Does this kernel has kcal support??
ayush.gl said:
Does this kernel has kcal support??
Click to expand...
Click to collapse
No
---------- Post added at 09:56 AM ---------- Previous post was at 09:53 AM ----------
Hope next update add kcal support
awesome work dev! thanks for sharing your genuies work!
Moderator Notice
Mod Edit: Thread Cleaned
Thread has been cleaned and all off topic posts have been removed.
Everyone should know the rules already, If you're unfamiliar with them I advise you to read the forum rules again. Don't forget that you agreed to keep these rules when you signed up.
This is a development thread so please stay on topic and keep the thread clean. Let's keep the discussion related to Development/Development related things and issues moving forward.
If anyone has any questions about this, please feel free to PM me directly and we can hopefully resolve it.
Thank you for your cooperation,
Funk Wizard
Forum Moderator
ayush.gl said:
Does this kernel has kcal support??
Click to expand...
Click to collapse
Next update + klaspe
Why big cluster stuck at 825 Mhz.
2.8
Simple Kernel Update v2.8-
Changelog:
- Upstream to 4.9.163
- Switched to aosp clang 9.0.1
- Fixed system freezing and stuttering
- Remove simple MSM thermal and simple low memory killer
- Lots of low memory killer optimisations
- Dynamic stune boost optimised
- Removed API for marking k-threads as performance critical
- Enable neon for ~20% UFS performance increase
- Disable SECCOMP
- Update boosting drivers
- Tick rate back to 300hz
- Removed bfq
- cfq is default i/o scheduler
- Readahead set to 128kb
- Optimisation for arm64
- Lots of other fixes and optimisations
Download: https://github.com/ethan-halsall/Simple-Kernel/releases
If you appreciate my work and want to support me click here https://www.paypal.me/ethanhalsall
For discussion head to our group: https://t.me/simplekernel
UPDATE
Simple Kernel Update v2.95-
Changelog:
- Upstream to 4.9.165
- Min freq back to 576mhz
- Battery drain issue sorted
- Miui supported again
- Back to lmk
- Reverted multi dynamic stune boost (hacky driver)
- Smoother frame rendering
- A lot of fixes and stuff
Download: https://github.com/ethan-halsall/Simple-Kernel/releases
If you appreciate my work and want to support me click here https://www.paypal.me/ethanhalsall
For discussion head to our group: https://t.me/simplekernel
hello dev, thanks for your contribution to poco.
i have a question, which rom do you use ?
BabyTedhu said:
hello dev, thanks for your contribution to poco.
i have a question, which rom do you use ?
Click to expand...
Click to collapse
I'm pretty sure he's using Syberia because he's the maintainer of that rom too
@oipr
Kindly update to the latest touch firmware. The one that this kernel is using gives me the touch delay issues which were not present after 9.1.24 touch driver. That's my only issue, other than that it is giving me great battery life.
Thank you in advance.
how to tweak kcal / klapse?
kernel auditor and ex kernel manager shows nothing
please help, desperatel looking solution
UPDATE
Simple Kernel Update v3.0-
Changelog:
- Upstream to 4.9.166
- Sched upstream bump
- Performance of games should be good again
- Merge tag 'LA.UM.7.8.r1-05000-SDM710.0'
- Improved performance critical framework
- Switched to the mainline square root algorithm
- A lot of fixes and optimisations (like a lot)
Download: https://github.com/ethan-halsall/Simple-Kernel/releases
If you appreciate my work and want to support me click here https://www.paypal.me/ethanhalsall
For discussion head to our group: https://t.me/simplekernel
Nice thanks! but why do you merge a tag for sdm710? It is for sdm845 too?
Which version of touch drivers is being used in 3.0 ?