Hey guys,
I got my RN3 a month ago and since last 2 weeks i am trying to unlock the bootloader using the official method.
I had asked MI for permission and I got it within 3 days. Now since 2 week I am trying to unlock the bootloader but I keep getting the error on MIUnlock "Couldn't verify Device".
I am using the latest MIUnlock version.
I have searched extensively for a solution to the problem but unfortunately all the work arounds are not working for me.
I have tried it on the stock ROM that the phone came with.
The latest stable global ROM from MI V7.3.7.0. MIUI7
The beta global ROM from MI MIUI8
Same error everywhere. The process stops at 50%.
I am skeptical to try the unofficial method since it could brick my phone. But may go through with it if there is no other option.
Basically I want to root the phone and flash a CM13 ROM.
Please help me out
Thanks
Mine had said the same error failed at 50% - mine shipped with miui V7.3.6.0 (some vendor firmware I guess), here is what I did to fix it.
I have the redmi note 3 pro so this will apply only for the kenzo (snapdragon version)- I am not familiar with the mediatek one.
1. Install Xiao Mi Flash (beta) , then boot the phone into fast boot mode (from power off state - hold vol down + power until you see it say fast boot.), in Mi Flash at the bottom select clean all
2. extract the kenzo "fast boot" firmware
http://en.miui.com/a-234.html (find the firmware in the list)
IE:
Redmi Note 3 Qualcomm Latest Global Stable Version Fastboot
(kenzo_global_images_V7.3.7.0.LHOMIDD_20160523.0000.23_5.1_global)
3. Select the extracted firmware folder in the Mi Flash program, hook the phone up and you should see it in the list, then click flash to flash it.. (this will erase all data)
after it finishes let it boot up it might take 10-15 minutes, then you can try to unlock it again, at this point it should pass now verification and unlock officially. - after success let it reboot again and it might take another 10-15 minutes to finish up.
(this is because it clears the phone data so it has to re-optimize all the apps).
do at own risk it worked for me but due to all the various methods the vendors use to flash this phone who knows if it will work for everyone...
otyg said:
Mine had said the same error failed at 50% - mine shipped with miui V7.3.6.0 (some vendor firmware I guess), here is what I did to fix it.
I have the redmi note 3 pro so this will apply only for the kenzo (snapdragon version)- I am not familiar with the mediatek one.
1. Install Xiao Mi Flash (beta) , then boot the phone into fast boot mode (from power off state - hold vol down + power until you see it say fast boot.), in Mi Flash at the bottom select clean all
2. extract the kenzo "fast boot" firmware
http://en.miui.com/a-234.html (find the firmware in the list)
IE:
Redmi Note 3 Qualcomm Latest Global Stable Version Fastboot
(kenzo_global_images_V7.3.7.0.LHOMIDD_20160523.0000.23_5.1_global)
3. Select the extracted firmware folder in the Mi Flash program, hook the phone up and you should see it in the list, then click flash to flash it.. (this will erase all data)
after it finishes let it boot up it might take 10-15 minutes, then you can try to unlock it again, at this point it should pass now verification and unlock officially. - after success let it reboot again and it might take another 10-15 minutes to finish up.
(this is because it clears the phone data so it has to re-optimize all the apps).
do at own risk it worked for me but due to all the various methods the vendors use to flash this phone who knows if it will work for everyone...
Click to expand...
Click to collapse
hello,
i am not able to use miflash(beta) due to some qualcomm driver error because i am on 32 bit system. Instead i am using miflash 2015 10.28.0 which have 3 options like flash all, flash all except storage ,flash all except data and storage.which one to choose?
look at the image i have attached for your reference
first I suggest installing the Mi PC Suite (just to get the correct drivers installed), then try XiaoMiFlash again
http://en.miui.com/thread-92720-1-1.html
here is the Xiao Mi Flash I used.
http://en.miui.com/thread-281979-1-1.html
MiFlashSetup-Beta.zip (29.53 MB, Downloads: 96818)
I had to link my phone first before the Unlock tool would work. So login into you Mi Account on the phone first.
I had the same problem because i hadnt installed the miui dev rom yet..
the only solution is flashing DEV ROM
it worked for me
Hello XDA!
Recently a friend of mine bought a Redmi note 3 (Hexa core, kenzo?) and i was trying to flash the Global version with locked bootloader but i started to have some problems. First of all, i have all drivers installed but when i tried to connect it to MiFlash, it wasnt recognized (like it wasnt even plugged) even if fastboot devices was showing me the phone was connected ( http://image.prntscr.com/image/219faa372d8c4c18a15fd3c8c9c7a99d.png ) even after a refresh.
So i tried to unlock my bootloader and install TWRP and i succeded but now i have a bootloop, i think its normal since i still have chinese ROM and unlocked bootloader (or is the twrp thats giving the loop?) and i was looking for a recovery flashable version of it, is it possibile to find it or to fix my problem?
i'd be happy if i could install Lineage OS on my phone, any help is welcome.
i already tried to flash TWRP using Mysteryagr's tutorial but after i click "write memory" and connent moto C via USB cable, message pops up: "chip type not match, target chip type is: MT6580, load scatter chip type is: MT6737M
my phone: Moto C XT1750, 1GB ram, 8GB flash, 3G, Dual Sim, Chipset Mediatek MT6580m
+1, even I am looking for a solution for XT1750.
Here is the youtube video which was helpful for one of my friend
Follow all the steps one by one.
Thanks.
https://www.youtube.com/watch?v=5snxtA5e2RY
if i am correct, it is not possible to unlock bootloader for Moto C XT1750
so to install TWRP, you have to go around using SP flashtool.
so i wouldn't recommend following that youtube video.
6,3" P36 PRO Android 9.1 Smartphone Dual SIM 6GB+128GB.
Its a fake chinese phone . It is in ebay from may sellers:
https://www.ebay.es/itm/6-3-P36-PRO...hash=item3b3bb42139:m:mo4aCyoy44CB8Vy_2KCWlhg
A friend of mine got one but when trying to root it bricked the bootloader. the pc shows the phone storage but the screen shows up without image.
So, I need the complete firmware. Someone that could have the same phone can use MTK droid tools or other similar tools to extract the rom files?
Thank you very much.
HI, everybody here's my problem i've flashed a european UI3.0 x3 sz with an official realme indian Android 11 UI2.0 firmware and now i'm stuck :
1) no update via google play (no more certified google protect)
2) no more access to fastboot to re -flash the device via oppo software or any ohter software
I think the only solution is to get an official ozip file because only recovery mode is available
I tried with the only ozip file available on realme but i get this error message : cannot update with an older version, im' currently with android 11 UI.20 and the firmware available is android 10 ui1.0
thanx for your help