Related
Hi,
I recently bought a Galaxy S9+ from Dubai and my CSC is XSG.
I'm looking to change the CSC to ZTO once I'm living in Brazil.
I've read many threads here but I couldn't get a conclusive answer, is it possible to change the CSC on Galaxy S9?
Thanks.
mario.rocha said:
Hi,
I recently bought a Galaxy S9+ from Dubai and my CSC is XSG.
I'm looking to change the CSC to ZTO once I'm living in Brazil.
I've read many threads here but I couldn't get a conclusive answer, is it possible to change the CSC on Galaxy S9?
Thanks.
Click to expand...
Click to collapse
You should have exynos so yes.
Just flash the exynos firmware you want which will give you the desired csc.
Or as an alternative flash a rom which allows you to pick the csc during install
sent from my Exynos S9 plus, Pixel 2 XL or Note FE
force70 said:
You should have exynos so yes.
Just flash the exynos firmware you want which will give you the desired csc.
Or as an alternative flash a rom which allows you to pick the csc during install
sent from my Exynos S9 plus, Pixel 2 XL or Note FE
Click to expand...
Click to collapse
Thanks for replying.
Just flashing a new firmware will not Trip Knox, right?
Do you have any firmware recommendations for me to use?
Thanks =)
mario.rocha said:
Thanks for replying.
Just flashing a new firmware will not Trip Knox, right?
Do you have any firmware recommendations for me to use?
Thanks =)
Click to expand...
Click to collapse
Flashing stock firmware in odin will not trip knox.
Go to sammobile.com and put in your model number and all the available firmwares will pop out, find one from Brazil.
Here check this:
https://www.sammobile.com/firmwares/SM-G965F/ZTO/download/G965FXXU1ARB3/210944/
sent from my Exynos S9 plus, Pixel 2 XL or Note FE
We will continue receiving OTA updates?
Jluisserrao said:
We will continue receiving OTA updates?
Click to expand...
Click to collapse
You'll be stuck on XSG and will get OTA updates for that.
ZTO is no longer a valid CSC for Exynos models, since in Latin America, Samsung decided to launch the 'SM-G9650' Snapdragon 845 model instead.
like exchanging csc galaxy s9 exynos. Dude I'm having the same problem here my G965f Singapore XSP I live in Brazil I can not get the right carrier version just OXM _XSP.
mario.rocha said:
Thanks for replying.
Just flashing a new firmware will not Trip Knox, right?
Do you have any firmware recommendations for me to use?
Thanks =)
Click to expand...
Click to collapse
Correct flashing firmware via odin does not trip knox.
sent from my Exynos S9 plus, Pixel 2 XL or Note FE
force70 said:
Correct flashing firmware via odin does not trip knox.
sent from my Exynos S9 plus, Pixel 2 XL or Note FE
Click to expand...
Click to collapse
Hi, sorry to bump in but i'd like to solve a little problem:
I have an S9+ (G9650) and my active CSC code is PCT. (see attached)
Why do i get this? what if i flash ZTO firmware from sammobile? do i get OTA updates? Will my CSC change? Thanks in advance
lukesky1313 said:
Hi, sorry to bump in but i'd like to solve a little problem:
I have an S9+ (G9650) and my active CSC code is PCT. (see attached)
Why do i get this? what if i flash ZTO firmware from sammobile? do i get OTA updates? Will my CSC change? Thanks in advance
Click to expand...
Click to collapse
If you flash the CSC then yes of course it will change lol.
Then you will get OTAs for that particular CSC.
Just make sure you dont try flashing firmware for a snapdragon if you have exynos or vice versa
sent from my Exynos S9 plus, Pixel 2 XL or Note FE
Hi everyone i have a question. I am from Bangladesh. I am using galaxy s9(SM-G960F). I SEARCHED in sam mobile for the latest firmware for my region which is BNG and found only 2 firmware both of which are from March 18. So i flashed the BRF8 june patch version from German DBT REGION using odin. Still my active csc remains BNG. Now my question is will i recieve future ota updates as usual? If not what should be my next course of action? Thanks in advance.
Will this work for snapdragon variants?
Ferhenhite said:
Hi everyone i have a question. I am from Bangladesh. I am using galaxy s9(SM-G960F). I SEARCHED in sam mobile for the latest firmware for my region which is BNG and found only 2 firmware both of which are from March 18. So i flashed the BRF8 june patch version from German DBT REGION using odin. Still my active csc remains BNG. Now my question is will i recieve future ota updates as usual? If not what should be my next course of action? Thanks in advance.
Click to expand...
Click to collapse
I did like u and didn't change my csc.:crying: @force70
Did u try it!
I did it 3 times and didn't work
View attachment 4644987
Any idea about this
hello if you want to change csc you should flash it by odin and then formate the phone to change it , if only flash csc file it will not change
To change the csc do you need to only flash csc or do you need to flash everything?
Since the 9650 and 965u are practically the same phone just one was shipped to Latin America while other one is international could I flash the 965u on my 9650 to enable Samsung pay / change csc?
Hi. Anyone used *#272*<IMEI code># in dialer to change CSC? Just wondering. It's how I changed mine.
EngrVan said:
Hi. Anyone used *#272*<IMEI code># in dialer to change CSC? Just wondering. It's how I changed mine.
Click to expand...
Click to collapse
Hey,
I have a 965N - meaning s9+ from Korea. I got it there, but know I want to flash a German / European version but CSC needs to be changed because of partition size.
Do I just need to change CSC and partition size will change ?
Vapochilled said:
Hey,
I have a 965N - meaning s9+ from Korea. I got it there, but know I want to flash a German / European version but CSC needs to be changed because of partition size.
Do I just need to change CSC and partition size will change ?
Click to expand...
Click to collapse
I don't think so.
Hi, I just got Galaxy S9+ and it is bloated with LG Uplus menu and apps. Model version is SM-G965N and when i look for firmware in Sammobile only few firmwares are shown. (KOO, LUC, SKC, KTC)
Can I download KOO firmware and flash with Odin to get rid of carrier bloats and return to stock?
I heard that S9 and S9+ have some problems changing CSC. But if i flash like this, would it be considered changing CSC. Would it work to flash with odin like this?
Is there anyone who knows answer to this?
I also want to do the same thing on my s9 plus. can anyone help please ... thanks
Nomado said:
Hi, I just got Galaxy S9+ and it is bloated with LG Uplus menu and apps. Model version is SM-G965N and when i look for firmware in Sammobile only few firmwares are shown. (KOO, LUC, SKC, KTC)
Can I download KOO firmware and flash with Odin to get rid of carrier bloats and return to stock?
I heard that S9 and S9+ have some problems changing CSC. But if i flash like this, would it be considered changing CSC. Would it work to flash with odin like this?
Click to expand...
Click to collapse
just so i have this straight, youre using a Samsung S9+ on a LG cellular service? thats awesome!! the 965N has the Exynos processor, to the best of my recollection, and you can verify this by installing CPU-Z. If it is, you should be able to flash the G965F firmware on it. I have a S9 that i got from Cricket and installed the G960U firmware on it, debranding it and im satisfied with the result. You will likely need the patched version of Odin in order to flash any firmware on it to debrand it. Verify the processor via CPU-Z and we can go from there
Achmadjpr said:
I also want to do the same thing on my s9 plus. can anyone help please ... thanks
Click to expand...
Click to collapse
pls post the SM-G965(?) variant here for further assistance
youdoofus said:
just so i have this straight, youre using a Samsung S9+ on a LG cellular service? thats awesome!! the 965N has the Exynos processor, to the best of my recollection, and you can verify this by installing CPU-Z. If it is, you should be able to flash the G965F firmware on it. I have a S9 that i got from Cricket and installed the G960U firmware on it, debranding it and im satisfied with the result. You will likely need the patched version of Odin in order to flash any firmware on it to debrand it. Verify the processor via CPU-Z and we can go from there
pls post the SM-G965(?) variant here for further assistance
Click to expand...
Click to collapse
G965N with LGU + firmware too And I want to unbrand it too.
i did it already, and went back to stock.
the service guy installed twrp, then installed custom rom- based on 965F/DS- everything was fine. except no 5.8ghz wifi connection, no OTA update menu.
Hello Everyone,
I have Samsung galaxy S9 SM-G965U1 (Sprint Unlocked variant currenty running on 8.0 Oreo Build.
Its USA Region model but currently being used in Pakistan, I believe thats why I am not getting new One UI update.
Now I want to install the One UI 9.0 Update manually via Odin but I don't know which version to install.
It is currently running on G965U1UEU3ARG7 build, when I checked with Smart Switch it was showing "Software is up to date RG7(XAA)". As per my knowledge I should search Sm-g965u1 on SamMobile and then select Unknown (XAA) in country for the right version of One UI build but I am not sure.
I would appreciate if you guys please check CSC and frimware details and suggest the right version for my Galaxy s9 Plus.
AP: G965U1UEU3ARG7
CP: G965USQU3ARG2
CSC: G965U1OYM3ARG7
THANKS,
I recommend the(XAA)
USE ODIN PATCH B3 TO UPDATE
Superglobo said:
I recommend the(XAA)
USE ODIN PATCH B3 TO UPDATE
Click to expand...
Click to collapse
Thanks for the response, but in XAA too there are 3-4 frimware, which one should I install considering my device current CSC and Frimware version.
Thanks,
Sajjad69 said:
Thanks for the response, but in XAA too there are 3-4 frimware, which one should I install considering my device current CSC and Frimware version.
Thanks,
Click to expand...
Click to collapse
If your using a Sprint phone that is unlocked you can choose the newest one under the Sprint (SPR) filter or the XAA filter. In either case CSD4 is the latest version released
If you look at the firmware using the links below (XAA and SPR filter) the CSC entry you listed s always gonna start along the lines of G965U1OYM for the G965U1 phone. The number after the letter M is going to represent the bootloader version, and that increases to a higher number over time. The final 4 characters are going to be related to the android version.
https://www.sammobile.com/firmwares/galaxy-s9-plus/SM-G965U1/SPR/
https://www.sammobile.com/firmwares/galaxy-s9-plus/SM-G965U1/XAA/
scottusa2008 said:
If your using a Sprint phone that is unlocked you can choose the newest one under the Sprint (SPR) filter or the XAA filter. In either case CSD4 is the latest version released
If you look at the firmware using the links below (XAA and SPR filter) the CSC entry you listed s always gonna start along the lines of G965U1OYM for the G965U1 phone. The number after the letter M is going to represent the bootloader version, and that increases to a higher number over time. The final 4 characters are going to be related to the android version.
Click to expand...
Click to collapse
Thanks for the detailed response, I really appreciate it. Since, RG7 (XAA) is already installed as per Smart Switch then I will go with the following; I believe it would work just fine with my Ufone network in Pakistan?
Model SM-G965U1
Model name Galaxy S9+
Country Unknown (XAA)
Version Android 9
Changelist 15611914
Build date Fri, 12 Apr 2019 01:29:40 +0000
Security Patch Level 2019-04-01
Product code XAA
PDA G965U1UES4CSD4
CSC G965U1OYM4CSD4
Also, please suggest the right ODIN version to install this firmware, would appreciate if you please share the link to the right version of ODIN for my Galaxy S9+ SM-G965U1 for Android 9 update (G965U1UES4CSD4 ).
Thanks!
I have Samsung galaxy S9+ SM-G965U1 too, but got the pie update even though i live in srilanka, but i dont know its sprint or verizon though, anyways just use the latest odin version to flash
vinura kithmal said:
I have Samsung galaxy S9+ SM-G965U1 too, but got the pie update even though i live in srilanka, but i dont know its sprint or verizon though, anyways just use the latest odin version to flash
Click to expand...
Click to collapse
Thanks! I am going to install latest G965U1UES4CSD4 (XAA) update for Galaxy S9+ SM-G965U1 using Odin v3.13.3. Will share the results after the update. Wish me luck! :fingers-crossed:
Android 10 DBT OFFICIAL, Exynos only
https://mega.nz/#!5UUS0YRY!wH60OiUSuwjFwQn8VBJ-CmOxCsw6UFJQ5i8MT3hMHeA
Switzerland just released android 10 for Note 10+5G (N976B) as well. Available on sam mobile.
Download the Samsung firmware for the Galaxy Note 10+ SM-N976B with product code AUT from Switzerland. This firmware has version number PDA N976BXXU1BSLA and CSC N976BOXM1BSLA. The operating system of this firmware is Android 10 , with build date Wed, 18 Dec 2019 05:43:02 +0000. Security patch date is 2019-12-01, with changelist 17459961.
Model SM-N976B
Model name Galaxy Note 10+
Country
Version Android 10
Changelist 17459961
Build date Wed, 18 Dec 2019 05:43:02 +0000
Security Patch Level 2019-12-01
Product code AUT
PDA N976BXXU1BSLA
CSC N976BOXM1BSLA
billd2439 said:
Switzerland just released android 10 for Note 10+5G (N976B) as well. Available on sam mobile.
Download the Samsung firmware for the Galaxy Note 10+ SM-N976B with product code AUT from Switzerland. This firmware has version number PDA N976BXXU1BSLA and CSC N976BOXM1BSLA. The operating system of this firmware is Android 10 , with build date Wed, 18 Dec 2019 05:43:02 +0000. Security patch date is 2019-12-01, with changelist 17459961.
Model SM-N976B
Model name Galaxy Note 10+
Country
Version Android 10
Changelist 17459961
Build date Wed, 18 Dec 2019 05:43:02 +0000
Security Patch Level 2019-12-01
Product code AUT
PDA N976BXXU1BSLA
CSC N976BOXM1BSLA
Click to expand...
Click to collapse
Have you installed this ^^^?
Works in UK as Well . Just use home_csc in odin
@home said:
Have you installed this ^^^?
Click to expand...
Click to collapse
Yes I have it installed and have now been using it for 48hrs. Everything is working well including NFC. Battery life seems to be a bit better.
No issues though and thats what matters.:good:
Has anyone else installed this firmware>
Does it break Goodlock?
guys how do you install this firmware?
Starwars edition firmware
kevin_23 said:
Android 10 DBT OFFICIAL, Exynos only
https://mega.nz/#!5UUS0YRY!wH60OiUSuwjFwQn8VBJ-CmOxCsw6UFJQ5i8MT3hMHeA
Click to expand...
Click to collapse
Hi dear can u tell me if u know about starwars edition android ten for exynos SM-N975F as I m using android ⁹ pie for that right now and eagerly waiting for its update to android ten so if u have the link to android ten starwars edition firmware share here plz.
---------- Post added at 04:10 PM ---------- Previous post was at 04:07 PM ----------
Tekkamen77 said:
guys how do you install this firmware?
Click to expand...
Click to collapse
U can install it via Odin method which is safe like it will not trigger your Knox status so Mobil will remain officiall status and easy to use u can search on YouTube there are thousands of videos for that.
Odin software
Tekkamen77 said:
guys how do you install this firmware?
Click to expand...
Click to collapse
https://forum.xda-developers.com/attachment.php?attachmentid=4449238&d=1521230475
Hope this helps!
Hi, my tab is stuck on oneui 2.5 with no update in sight for the United Arab Emirates (xsg) version. How can I change my CSC to the German CSC to recieve the update? Please guide me some umtutoroal. Thanks
You need to download odin patched next download the fimrware DBT is germany
Samsung
Galaxy Tab S6
Firmware
SM-T865
DBT
i use SamFirm to dowload firmware forget SamMobile they are so slow once firmware is downloaded unzip then launch odin and flash! Job done!
N1NJATH3ORY said:
You need to download odin patched next download the fimrware DBT is germany
Samsung
Galaxy Tab S6
Firmware
SM-T865
DBT
i use SamFirm to dowload firmware forget SamMobile they are so slow once firmware is downloaded unzip then launch odin and flash! Job done!
Click to expand...
Click to collapse
Thanks a lot for your kind reply. I'll give it a try.
aeroengg said:
Thanks a lot for your kind reply. I'll give it a try.
Click to expand...
Click to collapse
How did you get on ? i flashed mine went flawlessy all my old data intact!
Arobase40 said:
Are you sure about what you're talking about ???
P610 is a Galaxy tab S6 Lite with TFT display and Exynos SOC and you suggest him to flash a T865 firmware for AMOLED Tab with Snapdragonn SOC ??? ^^
P610 Tab has his own firmware with Android 11 and mars 2021 security patches including United Arab Emirates (xsg) version !!!
Download Samsung Galaxy Tab S6 Lite SM-P610 XSG United Arab Emirates P610XXU2CUBB firmware
Fast download latest Samsung Galaxy Tab S6 Lite firmware SM-P610 from United Arab Emirates with P610XXU2CUBB and Android version 11
www.sammobile.com
Click to expand...
Click to collapse
Um he is posting in the Tab S6 forum? i cant seen OP mentioning any model number ?
Arobase40 said:
It's in the title of this thread ! ^^
"How can I change the CSC of my wifi P610 xsg version to some other CSC in order to recieve the 3.1 update"
As there is no specific section for the Galaxy Tab S6 Lite, users are posting some times in this section and some other times into the Samsung Galaxy Tab S5e section... ^^
Click to expand...
Click to collapse
lol i been drunk i didn't even bother reading the title lol one sec let me dig out the links for you!
SamMobile.com
Samsung
Galaxy Tab S6 Lite
Firmware
SM-P610
DBT
P610XXU2CUBB
i jump between DBT and BTU both are unbranded! Take your pick!
SamMobile.com
Samsung
Galaxy Tab S6 Lite
Firmware
SM-P610
BTU
P610XXU2CUBB
Sick. Now that that's solved, I want to do the same thing to my T-Mobile S6 LTE SM-T867U. I imagine that'll involve changing the CSC, or can I just flash one of the international LTE Firmwares?
EDIT: I'm not drunk.