Hello good day, I have the Red Magic 6r. The Global version was coming but I installed the CN and now want to return it to the Global and it won't let me, it sends me to the Factory Reset screen and when reset it, it starts with the same CN Rom , what can i do, please help me. CN version 2.30, global version 2.24
Tienes que esperar a que salga una version superior a 2.30 o en su caso el Android 12, me paso lo mismo y era por eso, segui varios tutoriales y ninguno funciono
Related
Hello, sorry about my english, i´m from venezuela.
I have a brand new Qtek-a9100, with a WM5, i want to upgrade to WM6.
My qtek was a 2.26.0001 already unlocked, i be able to use 2 diferents operators gsm in my phone.
when i try to upgrade to WM6, some errors occured, error 300 was in 6 o 7 tried to upgrade..
In some of thems, says to try to recover, and i have the tre colors page on the screen, so tried again to upgrade with others roms.
In one case, says congratulations, you have finally upgrade and bla bla bla..., but when i try to turn it on, the same tre colors page appears again..
In the last tried, other message says congratulations and bla bla bla, but this time, the screen, shows a picture like a forrest o some like that with a bear jar in first plane (sorry by my english), stay there for aproximate 2 minutes, when i see that this not change i put it off the batery (i think that was welpfully) but now my qtek not response, not charge, dont shows the tres colors page (bootloader page) dont do nothing..
Please help, i love my qtek, i need my qtek for my kind of work.
What do i do for try to restore my qtek??
I was most apreciate your help!!
Thanks a lot for your help!!!!
You killed it by flashing it without CID unlocking first!
Now only a new board or special repair technique (not known here)
If you didn't flash a G3 IPL/SPL it shouldn't be dead. Sure the battery isn't empty. Follow this:
http://forum.xda-developers.com/showthread.php?t=298613
espero y te sirva de algo
amigo tambien soy de venezuela y me paso lo mismo mate la tarjeta no reset no enciende no luz de carga no nada de nada la misma cagada con la rom de la cerveza, anduve por todos los foros y nadie repara esta falla pero dejame decirte que destape el celular y sin saber como, lo arregle, desolde la bateria de memoria del telefono y con un adaptador ac/dc puesto en cuatro voltios tocando varios de los componentes de la tarjeta madre del telofono (incluso en algunos casos mostro chizpasos dando señas de corto) sin saber nada de electronica, volvi a colocar la minibateria que trae la tm la solde y cual fue mi sorpresa que el dispositivo me volvia mostrar las tres barras de colores seguidamente coloque su rom de wm5 que trae y me funciono de maravilla, resumiendo dado que tu tarjeta no tiene reparo conocido te sugiero que destapes tu a9100 y hagas lo mismo si quieres mas detalles del orden de como comenze a hacer los cortos mi email es [email protected] somos venezolanos y estamos en la misma lucha
Mod edit: Translation to English
English only on XDA please.
It turns out that I got the actual Android 6.0 and say to accept but when you reboot into recovery mode, the problem is that I have the TWRP and to the need upgrade the recovery stock, I wanted to ask them if they help me to reinstall the recovery stock, Please
Resulta que me llego la actulización de Android 6.0 y di a aceptar pero cuando se reinicio en modo recovery, el problema es que tengo el Twrp y como para la actualizacion nesesita la recovery stock , les queria pedir si me ayudan a reinstalar la recovery stock, please
<Moderator Edit>
English only on xda please!
Translation:
Hi everyone.
A few weeks ago I acquired this terminal which came with the global version and the truth was great but due to the comments I decided to put the Chinese version or stock but the truth has not convinced me I had a better performance with the global version will anyone tell with the global version to be able to install it again? Since I can't find it anywhere.
I clarify I have zui11
Hola a todos.
Hace unas semanas adquirí este terminal el cual venia con la versión global y la verdad andaba de maravilla pero debido a los comentarios decidí ponerle la versión china o stock pero la verdad no me ha convencido teni a un mejor rendimiento con la versión global¿alguien contará con la versión global para podérsela instalar de nuevo? Ya que no la encuentro en ningún lado.
Aclaro tengo zui11
Mod edit - translated by https://www.deepl.com/translator#es/en/Ayuda:
I was in stock (a10) and pass to miui. A month later I blocked the chip and I stopped grabbing wifi also, I went back to stock thinking it would solve and no... I wanted to update by fastboot to a11 and when I finished flashing with my flash just restarts, not to restart, reaches the configuration to start the phone and then restarts again ....
What can I do? :, (
***************************
Estaba en stock (a10) y pase a miui. Al mes se me bloqueo el chip y me dejo de agarrar wifi también, volví a stock pensando que iba a solucionar y no... Quise actualizar por fastboot a a11 y al terminar de flashar con mi flash solo se reinicia, no para de reiniciar , llega a la configuracion para iniciar el telefono y ya vuelve a reiniciar ....
Que puedo hacer? :, (
puma013 said:
Estaba en stock (a10) y pase a miui. Al mes se me bloqueo el chip y me dejo de agarrar wifi también, volví a stock pensando que iba a solucionar y no... Quise actualizar por fastboot a a11 y al terminar de flashar con mi flash solo se reinicia, no para de reiniciar , llega a la configuracion para iniciar el telefono y ya vuelve a reiniciar ....
Que puedo hacer? :, (
Click to expand...
Click to collapse
Hola y bienvenido a XDA
English is the preferred language in the forums, you can use google translate. This way you will get help easier.
Enjoy your stay
puma013 said:
Estaba en stock (a10) y pase a miui. Al mes se me bloqueo el chip y me dejo de agarrar wifi también, volví a stock pensando que iba a solucionar y no... Quise actualizar por fastboot a a11 y al terminar de flashar con mi flash solo se reinicia, no para de reiniciar , llega a la configuracion para iniciar el telefono y ya vuelve a reiniciar ....
Que puedo hacer? :, (
Click to expand...
Click to collapse
try to reflash stock rom with my flash. But i don't understand if you have update stock a10 to stock a11... Or you have flashed directly a miui version over a10... I think the second... Very bad decision... But... If you are lucky... Download fastboot mia3 fastboot stock android 11 rom. Put your phone into fastboot. Change Active slot to a. Flash stock rom with miflash. Format data. Pray.
my s21 is a g991u android 11 from ATT, can i install android 12 with another rom? what system should i install
reyesjoseorellana said:
my s21 is a g991u android 11 from ATT, can i install android 12 with another rom? what system should i install
Click to expand...
Click to collapse
Follow this link and it has at&t a12. Note though it's the 1u1 version meaning it's carrier unlocked (I believe, could be wrong, pretty new to the s21 and Samsung).
But, to answer your question, it's always better to have an 'open' rom rather than a carrier rom just because of the lack of 'bloat'.
that said, some carriers, and at&t is known for this, require you (or they used to) be running their rom before certain features will work, like volte for example. They also, at least used to, your device to be one of 'theirs', they verify that by checking imei.
It's kind of impossible to answer your question given the variables and you don't say which carrier you want to use your device with, or even if it's carrier unlocked.
AsItLies said:
Sigue este enlace y tiene at&t a12. Tenga en cuenta que es la versión 1u1, lo que significa que su operador está desbloqueado (creo que podría estar equivocado, bastante nuevo en el s21 y Samsung).
Pero, para responder a su pregunta, siempre es mejor tener una rom 'abierta' en lugar de una rom portadora solo por la falta de 'inflación'.
dicho esto, algunos operadores, y at & t es conocido por esto, requieren que usted (o solían hacerlo) esté ejecutando su rom antes de que funcionen ciertas funciones, como volte, por ejemplo. También, al menos solían, que su dispositivo fuera uno de 'suyos', lo verifican al verificar imei.
Es un poco imposible responder a su pregunta dadas las variables y no dice con qué operador desea usar su dispositivo, o incluso si está desbloqueado.
Click to expand...
Click to collapse
gracias por responderme, mi s21 fue desbloqueado recientemente para usar con tigo carrier, actualmente solo uso tigo como carrier
when inserting the tigo chip it asks me for a code, I recently took it to a trusted place and they told me that I could use it with any operator
For those who have the same device, I can tell you that if possible I currently have Android 12 on my att g991u, which is now g991u1