Hello everyone.
I have tried to root my OnePlus Nord CE 5G following the instructions in the HOWTO from this forum to the letter.
However, when trying to write the TWRP, I get the following error:
./fastboot flash recovery twrp-3.5.2_11-0-UNOFFICIAL-denniz.img
Sending 'recovery' (131072 KB) OKAY [ 3.092s]
Writing 'recovery' FAILED (remote: 'Error flashing partition : Volume Full')
fastboot: error: Command failed
I did a ./fastboot getvar all and have attached it.
Does anyone have any idea how to proceed?
Any help is greatly appreciated.
Thanks,
Audoghast
Hello everyone.
I had the „volume full“ error before and have now found the reason why which was quite embarrassing: my phone is a Oneplus Nord CE 5G and this is the wrong forum.
I do not know how I could overlook that but I did and I am sorry if anyone put in too much thought into my problem.
The TWRP.img file was wrong and hence the “volume full” message which appears in such cases.
The volume was not really full.
I will now move to the right forum here.
Thanks and goodbye.
Audoghast
Related
Hi guys,
So I have made the mistake of relocking the bootloader after unlocking it. Now my phone is bricked, and the bootloader is locked.
I have downloaded the stock rom XT1524_RETEUALL_MOTOE2(4G-LTE)_5.0.2_LXI22.50-13_cid7_subsidy-DEFAULT_CFC.xml, the cid and product reference are matching, also my phone was on 5.0.2.
But my phone won't flash, for example, I get :
"C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash system system.img_sparsechunk.3
target reported max download size of 268435456 bytes
sending 'system' (254911 KB)...
OKAY [ 8.012s]
writing 'system'...
(bootloader) Invalid signed image
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 8.072s"
when I input some of the commands for flashing.
My bootloader logs show :
"failed to validate system image"
I don't understand why it would be doing that as the stock is matching, I have checked on several threads and I can't find any concrete solution for fixing this.
Please help.
Thanks,
No one has a clue ?
Having the same prolem with my XT1521 please somebody helppppppppppp
up..
try to use mfastboot, its included in my modem flash zip (https://mega.nz/#!pglHWQ6B!zYNHtO9qERuFqrbv40M62kgpULS2TK53m_vB3msCC6g ), Windows only.
also there is a guide here: http://forum.xda-developers.com/mot...e-restore-moto-e-2015-stock-firmware-t3044936
and flash in order as shown in the guide
Is Your Fastboot working or your phone completely bricked ?
Hi Gentlemen,
Thanks for the replies.
Sorry, all the above I've tried with mfastboot. It just won't flash it. Probably cause the phone is locked now.
The above is what it's returning.
Also I cannot unlock the phone anymore, it returns "FAILED (remote failure)"
"Check 'Allow OEM unlock' in Developper options"
Mine its also bricked, same situation, same problems :c
A couple of days ago, I got an error on my phone (Motorola XT1033) saying that it cannot load the home screen. So, I restarted it in order to resolve the issue. However, it didn't reboot and since then it has been stuck in the Motorola logo.
I tried to do recovery or factory reset, but all the options lead to the same Motorola logo with no luck.
The only option that is working is AP Fastboot. I managed to unlock the bootloader by getting an unlock code from Motorola's website and using the mfastboot command. So I assume that the fastboot command is working since it detects the devices; however, I couldn't make ADB command to work since it give the error: 'device not found'.
Anyway, the second step is to flash the phone. According to this question, I should be able to do that. However, when I am running the command fastboot flash partition gpt.bin, I am getting the following result:
(bootloader) Variable not supported!
target max-download-size: 30MB
sending 'partition' (32 KB)...
OKAY [ 0.022s]
writing 'partition'...
FAILED (remote failure)
finished. total time: 0.154s
I have been searching for days to solve this problem, but nothing yet! I don't know which part I am doing wrong.
Hello ,
i am sorry for my bad englisch.
I tried to root my LG G5 H850.
My instrucktion was https://forum.xda-developers.com/lg-g5/development/official-european-lg-g5-h850-bootloader-t3363040
at point 6 (While the phone is still in fastboot enter the following command to unlock the bootloader i get this error message bye typing in the consol fastboot flash unlock unlock.bin:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash unlock unlock.bin target reported
max download size of 536870912 bytes sending 'unlock' (1 KB)...
OKAY [ 0.036s]
writing 'unlock'... FAILED (remote: cannot flash this partition in unlocked state)
finished. total time: 0.060s
after this the next command dont worked.
Dissapointed i tried this tutorial: https://forum.xda-developers.com/lg-g5/how-to/guide-adb-root-rw-dm-verity-off-sprint-t3523499/
every thing was well but on point 9. my handy startet after rebooting to reboot (logic) it was in a reboot loop (i got the orange triangle) it just reboot and reboot.
i dont saved anything just a normal lg backup on my sd card (my fault sorry)
idk how to get in recovery mode when i push volume down and power it just continue rebooting.
i can get into the bootloader when i plug in my cabel and push volume up
i can also go into my downlaod mode
i treied to write a .kdz file on it but at 9% it stuck and says: Error: Error Code = 0x2000 Falshing Fail
the same error when i chose upgrade
i used the file from http://www.stechguide.com/download-lg-g5-android-nougat-firmware/
the file: Download LG G5 Europe Nougat Firmware KDZ File (EU Brand) – Download
pleas help me
i am so sorry for the mess here and the bad englisch but i need so much help pleas help me!
problem solved i did not installed the right dll for my handy
Hey
can you give me unlock.bin Please
When i want to use this command:
fastboot flash recovery recovery.img
It says:
Sending 'recovery' (18054 KB) OKAY [ 0.964s]
Writing 'recovery' FAILED (remote: 'not allowed in locked state')
fastboot: error: Command failed
But my bootloader is unlocked, and everything is okay, so i need help.
(Sorry for my english, it's because im french)
I've found the solution
Im sorry for posting this... i found a solution.
hi,
i havew the same problem. was is your solution.
thanks for help
Hi guys.
New to the forums. I know that there are three threads that already detail what I am asking for. I just don't get it. I try to follow one of them and it says "run Qfil; install QPst." I would be happy to do that, but I just do not know where they are or how to run them.
Then one of the twrp files (whatever that is) has been taken down because of "gross violations." I cannot figure out how to do what the threads say to do.
Can someone please tell me how to root this thing? Step-by-step. With all the downloads. Thanks for your help.
Feel free to close this thread when a response appears.
Can someone please respond to this now that it is in the correct forum?
@wsmyth
May be this detailled guide helps you: https://www.getdroidtips.com/twrp-recovery-unimax-umx-u683cl-root/
Good luck.
Thank you
Thank you very much. I am starting there!
Help
I followed all instructions. I cannot get a twrp to load.
Good instructions, but I had these problems.
1. There is no link to a TWRP file. I use the link shown, and I get "Stock April Patch" from mediafire. None of the files here have TWRP in the filename.
2. I did go to https://rootmygalaxy.net/root-twrp-umx-u673c, a similar site. It did have a link to a TWRP file to use. Your instructions are identical.
So I turn off the device. I turn it on with power and volume-up button. The device goes to Mr. Android lying down with the message "No Command." I look at some other sites, and it tells me to hold power, and press power-up.
This takes me to Android Recovery menu. On Windows cmd line (ADB and Fastboot folder), I type adb reboot bootloader. The Windows screen responds no device/emulators found.
So I select option on the Android to Reboot to Bootloader. The device boots into FASTBOOT MODE with START at the top. I imagine that this is what the above command is intended to do. For fun, I type the same command above in Windows, and I get the same response. But when I type fastboot devices , I get the device serial number (as shown on the START screen) and the word fastboot.
I imagine the device is ready to install TWRP. I use the TWRP file that I downloaded from the other page (remember, yours and their instructions are identical). I type fastboot flash recovery twrpname.img in Windows, and I get this set of messages:
target reported max download size 26214400
sending 'recovery' (20220 KB)...
OKAY [ 0.650s]
writing 'recovery'...
FAILED (remote: unknown command)
finished. total time: 0.668s
Any help is GREATLY APPRECIATED.
wsmyth said:
I type fastboot flash recovery twrpname.img in Windows, and I get this set of messages:
target reported max download size 26214400
sending 'recovery' (20220 KB)...
OKAY [ 0.650s]
writing 'recovery'...
FAILED (remote: unknown command)
finished. total time: 0.668s
Click to expand...
Click to collapse
IMO you didn't do anything wrong.
To me it seems that OEM/Carrier did not put the typical Fastboot commands into the boot-loader.
BTW:
To test the TWRP recovery without permanently flashing, run the following:
Code:
fastboot devices
fastboot boot twrpname.img
Follow up
Thanks. When I type that code, I get...
downloading 'boot.img'...
OKAY [ 0.640s]
booting...
FAILED (remote: unknown command)
finished. total time: 0.646s
Thanks again
Does it matter that I have no SIM card in this device. on the START screen, I have this...
Press volume key to select, and press power key to select
FASTBOOT MODE (in red)
PRODUCT_NAME - MSM8909
VARIANT - QRD eMMC
BOOTLOADER VERSION -
BASEBAND VERSION -
SERIAL NUMBER - a10b7526
SECURE BOOT - disabled
DEVICE STATE - unlocked (in red)
Is there anyone that can help me on this? Should I take a magnet to the back of the device? Would that help?
UMX U683CL root?
hey guys, when it comes to all of this i would say i am beyond a newb. so if i violate any protocol i plead ignorance and hope that you will bear with me. i have my disable sister who lives with me and i am responsible for who has had a...
forum.xda-developers.com