I have flashed my device with a ROM (I didn't find exactly my one). Before I flashed, my TV remote was fully functional. But now, 1 of them isn't working which was supposed to be "PROG_YELLOW". And 2 pair of buttons are identical code is 400 and 465. All buttons were messed up, I fixed them by modifying keycodes in system/usr/keylayout/***.kl
I need those buttons to work, especially the PROG_YELLOW one. How do I create a new remote.conf for my Android TV? cause I don't have the original firmware.
Board: TP.ATM30.PB801
RAM: 512 MB
Android: 5.1.1
Root: Yes
Here's an abandoned Telegram channel with tons of remote.conf files. You may find one that will work.
Telegram: Contact @remoteconfig
t.me
Hotrod369 said:
Here's an abandoned Telegram channel with tons of remote.conf files. You may find one that will work.
Telegram: Contact @remoteconfig
t.me
Click to expand...
Click to collapse
Unable to locate @remoteconfig on Telegram. Can you please check if they still there,
dbkalyan said:
Unable to locate @remoteconfig on Telegram. Can you please check if they still there,
Click to expand...
Click to collapse
This is odd. I can go to the channel but if I try to use a link to get to it I get the same message. It must be where it's abandoned. Which box do you need the file for? I'll see if that channel has it. Here a screen of the channel. It's still there.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hotrod369 said:
This is odd. I can go to the channel but if I try to use a link to get to it I get the same message. It must be where it's abandoned. Which box do you need the file for? I'll see if that channel has it. Here a screen of the channel. It's still there.
View attachment 5715049
Click to expand...
Click to collapse
TX5 Pro would be nice. Appreciate your input
dbkalyan said:
TX5 Pro would be nice. Appreciate your input
Click to expand...
Click to collapse
It was there so here ya go. Don't forget to rename it back to remote.conf
Hotrod369 said:
It was there so here ya go. Don't forget to rename it back to remote.conf
Click to expand...
Click to collapse
Thanks mate. Appreciate your quick response.
dbkalyan said:
Thanks mate. Appreciate your quick response.
Click to expand...
Click to collapse
If you've flashed that box with a custom ROM with Android 9 or above it's going to take more than just that remote.conf to get you're remote working again. But I hope it works out for you. If there is anything else I can do let me know.
Hotrod369 said:
If you've flashed that box with a custom ROM with Android 9 or above it's going to take more than just that remote.conf to get you're remote working again. But I hope it works out for you. If there is anything else I can do let me know.
Click to expand...
Click to collapse
Hi. I had flashed a TX5 pro image on a MXQ box with S905x and Version 6.0.1. I just found out that it was previously a Worldmax Box which you buy with couple of years of prepaid IPTV subs. Box is working fine and bit slow in response because of old processor. So far no buffering or lagging .Original remote is different with heaps of extra buttons than ordinary Android Remote . I found an old Android remote and did remote.conf . Its working brilliantly. Problem sorted. Thank you for your support and file.
dbkalyan said:
Hi. I had flashed a TX5 pro image on a MXQ box with S905x and Version 6.0.1. I just found out that it was previously a Worldmax Box which you buy with couple of years of prepaid IPTV subs. Box is working fine and bit slow in response because of old processor. So far no buffering or lagging .Original remote is different with heaps of extra buttons than ordinary Android Remote . I found an old Android remote and did remote.conf . Its working brilliantly. Problem sorted. Thank you for your support and file.
Click to expand...
Click to collapse
You're very welcome and I'm glad you got it fixed.
Related
These apps are straigt from the Huawei Ascend P1. You can install them using your favorite File Explorer since these are APKs.
Huawei Music Player
Huawei Keyboard
Huawei Cloud
Huawei File Explorer(+Cloud)
Huawei DNLA(doesnt work on Wildfire! just for those who got a DNLA compatible phone as Samsung Galaxy S2)
Huawei Soundrecorder(will replace stock sound recorder)
Huawei Wallpaper Picker
Huawei Camera
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(Screenshots made on Samsung Galaxy Nexus)
Link for registration for hicloud:
https://www1.hicloud.com/user/login.action;jsessionid=3F4011C3E45BA5FBC9D55BBD042B10EF
http://www.relink.us/view.php?id=beef1894178a9c7ba8836e91c32b50
Seem to work on Gingerbread(Wildfire Cm 7.2) and Ice Cream Sandwich(Galaxy Nexus)
Feedback appreciated
(Since I didn´t found a topic where you could download them all, I made one)
Thank you for sharing!
Screenshots would be appreciated.
i already posted similar to this,its 5 posts below yours.
just tested this http://forum.xda-developers.com/showthread.php?p=25528869
And as a basic keyboard it works quite well :-D remember to go to settings, language and keyboard and select after install, then open up keypad input screen and long press in any input box to choose input method and choose huawei. Also i set keypad height to 1. All credit goes to op in linked thread.
[ sig ]
" using my thanks as likes/thanks "
using my thanks as likes
slymobi said:
i already posted similar to this,its 5 posts below yours.
just tested this http://forum.xda-developers.com/showthread.php?p=25528869
And as a basic keyboard it works quite well :-D remember to go to settings, language and keyboard and select after install, then open up keypad input screen and long press in any input box to choose input method and choose huawei. Also i set keypad height to 1. All credit goes to op in linked thread.
[ sig ]
" using my thanks as likes/thanks "
using my thanks as likes
Click to expand...
Click to collapse
Oh, have just seen that only the keyboard was there so I uploaded them myself
lol its fine, the link leads to all other stuff too.
using my thanks as likes
When trying to install Music+, I get the "Error in parsing the file" or something. I also tried the apk from teamandroid, same thing.
Alex_GP said:
When trying to install Music+, I get the "Error in parsing the file" or something. I also tried the apk from teamandroid, same thing.
Click to expand...
Click to collapse
if you read the on the page i linked then it does state that these are really for android 4.0 so it doesnt surprise me that some of the apks wont work correct on our phones.
slymobi said:
if you read the on the page i linked then it does state that these are really for android 4.0 so it doesnt surprise me that some of the apks wont work correct on our phones.
Click to expand...
Click to collapse
I read that dude. Maybe you don`t appreciate my feedback, but some people will.
Alex_GP said:
I read that dude. Maybe you don`t appreciate my feedback, but some people will.
Click to expand...
Click to collapse
woah easy tiger! I wasn't having a moan at you just stating what is written by the op of the apps and informing you why they might not work.
using my thanks as likes
Also tested on an ICS LG GT540, Music + can be installed, but "Force Closes" instantly.
Camera force closes at start.
I dont know how to download... can someone upload the music apk.?
Download is very easy, what´s your problem? Only if you´re not using PC download may not work.
Just click the circles and select the apk you want.
disable the "fade in" effect
How do I disable the "fade in" effect, in the huawei music player ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Screenshots will be here
Poison is a community project that aims at giving users the best Android TV experience possible.
Currently we only support AMLogic based devices but we are working on branching to other chipsets.
So enjoy the cleanliness, optimized and powerful feel of Poison!
Project developers are Ricky Divjakovski, Whiteak and Minixfreak.
Downloads can be found here : https://mega.nz/#F!5sRF0ABR!VntJeIduhp8pZ_gFyS5YpQ
Firmware specific support will be here
You can contribute to the project by donating at PayPal.Me/PoisonDevelopers
If you would like a custom built firmware we are able to do this, email [email protected]
Thanks for still supporting our great e.g. s905x devices.
A question in general: is it a widevine thing that google movies only supports 480p?
Once again thanks a lot I'm looking forward for your nice work!
JFK1975 said:
Thanks for still supporting our great e.g. s905x devices.
A question in general: is it a widevine thing that google movies only supports 480p?
Once again thanks a lot I'm looking forward for your nice work!
Click to expand...
Click to collapse
Im sorry i dont understand, DRM is responsible for quite abit but i dont think it has anything to any google apps running in 480p
Ricky Divjakovski said:
Im sorry i dont understand, DRM is responsible for quite abit but i dont think it has anything to any google apps running in 480p
Click to expand...
Click to collapse
I'm sorry for my Bad english, what i meant that playback isnt possible higher than 480p , e.g. full HD.
Hi @Ricky Divjakovski. i will test it asap.
Just one question : did you have an idea about the avaibality for my specific TX9 pro lpDDR3 with strange frequency ? ( same as vorke 6+)
Thanks.
on my t95Z plus it works realy great.
Just a little thing if we hate red color ... damn lol
Thank you.
By the way, where is the S905x2 ROM?
papla83 said:
Hi @Ricky Divjakovski. i will test it asap.
Just one question : did you have an idea about the avaibality for my specific TX9 pro lpDDR3 with strange frequency ? ( same as vorke 6+)
Thanks.
Click to expand...
Click to collapse
Hello,
S912 + LPDDR3 would be also nice or give me some advice how to repack img to be able run on LP as far know currently developed images for S912 will brick device or burning process will fail with DDR part...
Im not developer im flashoholic so do me a favor hehe
nays_pl said:
Hello,
S912 + LPDDR3 would be also nice or give me some advice how to repack img to be able run on LP as far know currently developed images for S912 will brick device or burning process will fail with DDR part...
Im not developer im flashoholic so do me a favor hehe
Click to expand...
Click to collapse
Try swapping system partition from this rom to stock rom
Hello,
just installed the ROM for S905W X96mini. after installation i have the menu to select language, but no way to do it. remote seems not working, and when i connect a cabled mouse, i see the cursor on the screen, i can scroll up and down to view list of the available language, but i can't select any one. click on lanh=guage don't work is there any fix or workaround
Thank you
Ricky Divjakovski said:
Try swapping system partition from this rom to stock rom
Click to expand...
Click to collapse
i allready try to flash it on my TX9Pro without erase bootloader, but it doesn't boot, nothing on screen.
the previous rom on it was a modded ATVX v2h with compatible bootloader for my device.
Hi,
Amlogic Q201 3Gb, device with T95Z plus logo and Vontar on the bottom. I cant flash it with none ROM through USB key. It just Error when trying to update and stay there.
I dont have USB male.male cabel to try direct with comp.
Which firmware should I try?
Thanx, Mitcho
@Ricky Divjakovski,
Is there a way to unroot redpoison or bluepoison that could pass safetynet check?
I tried magisk with safety net fix but both also failed with ATV version.
The other poison rom 4.x worked with magisk.
Thanks
Ricky Divjakovski said:
Try swapping system partition from this rom to stock rom
Click to expand...
Click to collapse
Didnt work ...i will give a try one more time. Btw im using amlogic linux tool from github to repack img. Hope that is correct procedure
Hi @Ricky Divjakovski just a little bug report about the s912 red poison rom on my t95z plus.
My gigabit lan doesn't works correctly, the device say connected through the ethernet (showing ip and Mac address) but I have no access to the internet.
I will try asap with other ethernet port or directly on my router (now it's connected through power line with gigabit plc).
Would be very useful if Ricky explain the differences of the 3 S912 versions.
Hey everyone, sorry if im not very active here i have multiple projects under way from the AMLogic tools, MTK tools, a modular way of making poison(ATV based and stock based) and a few other side projects, if you have any questions i will answer when i can but @minixfreak is the one to talk to about the ATV based firmwares
Hi sir,
Maybe you forget the firmware for the S905x2 (H96 max X2)
thanks
screen??
Is this poison 5.0? On T95Z.
Hello people,
i hope the model is on the right thread.
Im Daniele from italy. I have this box and is stuck on logo android. I try to reset it or change the power supply. But not fix.
I read something about to flash the firmware (two methods) can you explain me and give me the right FW?
here you can see the picture of mainboard.
https://photos.app.goo.gl/R2V2zKzBdcQiHq6u6
https://photos.app.goo.gl/7Z69DR6dfbxZt4oR8
Yiu can try my custom android TV 9.0 Rom for s905w devices, based on official mi box firmware so is fast and stable l https://aidansrom.wordpress.com
Thanks for reply. Are you sure your FW is compatible? How can understand if is compatible. Is not better flash original FW?
Benz83 said:
Thanks for reply. Are you sure your FW is compatible? How can understand if is compatible. Is not better flash original FW?
Click to expand...
Click to collapse
there is no 100% Sure Way to know if its deffinatley compatible, with amlogic chips (like the s905w) can usally install each others firmware as long as the Chip matches (s905w roms on s905w chips) they will usally all boot up but things like wifi, bluetooth & IR Remote may not work so then its would be a case of try another rom, I have 4 versions for s905w with diffrent wifi & remote configurations so it's a case of try them and see what works for you, and i will still be releasing updates with more wifi chips ect soon, if you work with me no doubt we can get thing up and running well for you
ok man, you convinced me. i downloaded 3. [S905W] [UNTESTED] [w03] Aidan's Custom ROM [v3]
i will let you know
Benz83 said:
ok man, you convinced me. i downloaded 3. [S905W] [UNTESTED] [w03] Aidan's Custom ROM [v3]
i will let you know
Click to expand...
Click to collapse
Good Luck
V4 Uploading Now As Well With NTFS USB HDD/Stick Fix if this is something important to you & Also V3 will now say there is an update available, You Will Have To Download my v4 Manually To Update (Baisically its trying to install the Official Mi Box S Update But Because We Are Not Running On Official Mi Box Hardware The Update Will Fail) Once I Know a New Version For The Mi Box is Released I Can Download It From My Device And Modify it To Run On Our Devices, i Aim To Update To The Latest Mi Box Firmware Within a Week Of The Update Being available For Official Mi Box Devices
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Benz83 said:
View attachment 5159317
Click to expand...
Click to collapse
V4 Uploaded, There Are 4 Versions to try
https://drive.google.com/drive/folders/13k5wx9zqHRV_7R5kfwHcLxPdb1cYMC1U?usp=sharing
Maybe its me or maybe something strange. I try to use the last version, so i installed the usb burning tool 3.1, after check image open the version 2.1.8.
I uninstall the old version.
However, i try several fw, also others find on web, same error
It happened to me when flashing tanix tx9s.
I think the tool checks the img file and determines whether to use the latest or an older version.
The flashing went fine for me.
Benz83 said:
Maybe its me or maybe something strange. I try to use the last version, so i installed the usb burning tool 3.1, after check image open the version 2.1.8.
I uninstall the old version.
However, i try several fw, also others find on web, same error
Click to expand...
Click to collapse
Try these Stock Roms
https://drive.google.com/file/d/1Q3vsCniqs-Aq7fiFz8LQ3aBbyYdIOsm4/view
https://drive.google.com/file/d/1fea3eqLRzG42ydB1DC9DjlbgDKnBISW1/view
thanks a lot, but nothing to do. Other solution?
A method to reset nand flash? i saw something about pinout
After installing Magisk i needed BusyBox. (I was trying to install "V4FXHiF".) It rebooted.... but after 10Min the boot logo was still the only thing showing.
I tried to reset the device with the push of the hidden reset button and connecting the power. Still nothing.
Now i need the original firmware to flash de device. I looked everywhere but found nothing.
Is there anyone that can help me unbrick the device by sharing there firmware with me.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you for your time and efforts.
After a big search I found a website that had a overview of all manufactures that makes a TV Box.
URL site: https://androidtvnews.com/android-tv-box-firmware/
I found that my device (TH95H) was manufactured by WE-CHIP.
I downloaded this image (firmware). "T95 DUAL WIFI"
T95-H616-AW859A-10.1.A19.img
I looked at the description of the file. This was the best match with my device.
Flashed the firmware and beside the different UI everything works fine. For a different launcher, I forced stopped the default launcher. When I used the return button on my remote it asked what to use as a default launcher. That seems to do the trick.
Friend, can you help me with the link, I can't find it and I have the same problem, thanks
Futureline said:
After a big search I found a website that had a overview of all manufactures that makes a TV Box.
URL site: https://androidtvnews.com/android-tv-box-firmware/
I found that my device (TH95H) was manufactured by WE-CHIP.
I downloaded this image (firmware). "T95 DUAL WIFI"
T95-H616-AW859A-10.1.A19.img
I looked at the description of the file. This was the best match with my device.
Flashed the firmware and beside the different UI everything works fine. For a different launcher, I forced stopped the default launcher. When I used the return button on my remote it asked what to use as a default launcher. That seems to do the trick.
Click to expand...
Click to collapse
Friend, can you help me with the link, I can't find it and I have the same problem, thanks
Jhorvany said:
Friend, can you help me with the link, I can't find it and I have the same problem, thanks
Click to expand...
Click to collapse
stock t95H
File on MEGA
mega.nz
Futureline said:
After a big search I found a website that had a overview of all manufactures that makes a TV Box.
URL site: https://androidtvnews.com/android-tv-box-firmware/
I found that my device (TH95H) was manufactured by WE-CHIP.
I downloaded this image (firmware). "T95 DUAL WIFI"
T95-H616-AW859A-10.1.A19.img
I looked at the description of the file. This was the best match with my device.
Flashed the firmware and beside the different UI everything works fine. For a different launcher, I forced stopped the default launcher. When I used the return button on my remote it asked what to use as a default launcher. That seems to do the trick.
Click to expand...
Click to collapse
can you please share the file with me, thanks a lot.
Can anyone reupdate the stock firmware? I got this device around one week, but the Mega link it's unavailable
T95 Rom original Corrigida.zip
drive.google.com
MA7MOD_GSM said:
T95 Rom original Corrigida.zip
drive.google.com
Click to expand...
Click to collapse
Thx a lot! We talking about T95H, right? Or that H doesn't have nothing, just different seller.
I think its T95-H616-10.1.12.img you can test it
MA7MOD_GSM said:
I think its T95-H616-10.1.12.img you can test it
Click to expand...
Click to collapse
Thx a lot, but i didn't brick my device till now. I was contacting the seller and they send me Mega link from the latest stock firmware.
Futureline said:
After installing Magisk i needed BusyBox. (I was trying to install "V4FXHiF".) It rebooted.... but after 10Min the boot logo was still the only thing showing.
I tried to reset the device with the push of the hidden reset button and connecting the power. Still nothing.
Now i need the original firmware to flash de device. I looked everywhere but found nothing.
Is there anyone that can help me unbrick the device by sharing there firmware with me.
View attachment 5206471
Thank you for your time and efforts.
Click to expand...
Click to collapse
Is your problem solved, how
theresident said:
Thx a lot! We talking about T95H, right? Or that H doesn't have nothing, just different seller.
Click to expand...
Click to collapse
Did you fined the firmware, is your problem solved, i need the same firmware
Ansanizam said:
Did you fined the firmware, is your problem solved, i need the same firmware
Click to expand...
Click to collapse
I never had problem. What firmware you need?
Sorry mistaken,,,, but if you could help me i need android box T95h firmware. 10.1.X28.img
theresident said:
I never had problem. What firmware you need?
Click to expand...
Click to collapse
Sorry mistaken,,,, but if you could help me i need android box T95h firmware. 10.1.X28.img
Ansanizam said:
Sorry mistaken,,,, but if you could help me i need android box T95h firmware. 10.1.X28.img
Click to expand...
Click to collapse
I got T95H also, 2 gb Ram..
1.64 GB file on MEGA
mega.nz
But its x29
theresident said:
I got T95H also, 2 gb Ram..
1.64 GB file on MEGA
mega.nz
But its x29
Click to expand...
Click to collapse
Will try this if work..searching for x28.. If it work i will post here
theresident said:
I got T95H also, 2 gb Ram..
1.64 GB file on MEGA
mega.nz
But its x29Box details
Click to expand...
Click to collapse
I have tried x29 did not solve that problem...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download: Official Server
Build Date: 2023-01-12 16:30:53 UTC
ProjectElixir Download
XDA
Test Device:
SM-T225 (Stock Android 13 XXU1CVL5)
VegaBobo /DSU Sideloader v.2.01
✓ Cause Next step Launcher bugs.(Navigation bar)
-Please set Display smallest width =598 dp
Now you are good to go.
-i will post fixed launcher later.
✓ Supported exFAT micro-sdcard
Read only super partition.
✓ Bluetooth connecting without bugs (No need Phh Treble Setting)
✓ Google assistant "Can call to someone"
Quick Face Unlock
Enable MTP by>>>
Offline Charging not fully supported.
- Offline-Charging Bug
- it enable while you insert usb-cable then shutdown your device only.
(i will post solution later.)
Supported Vega Bobo DSU Sideloader
Can I install Android 13 XXU1CVL5 firmware from Europe on t220 us version?
abc1054 said:
Can I install Android 13 XXU1CVL5 firmware from Europe on t220 us version?
Click to expand...
Click to collapse
please check the same CSC from
https://samfrew.com/model/SM-T220/
safety install only the same Muti CSC code only.
Note: you can't uses changes storage between internal and external also.
So how can I put GSI Android 13 the one you mentioned on Android 12, without having Android 13 firmware.
Sorry disregard the statement above. I got it. thanks
Does the GSI have gapps installed and/or magisk?
abc1054 said:
Sorry disregard the statement above. I got it. thanks
Click to expand...
Click to collapse
sandorex said:
Does the GSI have gapps installed and/or magisk?
Click to expand...
Click to collapse
included gapps only.
Does anyone know where the debloat for tab a7 lite?
I flashed it works ok, can't say it's that smooth i feel like pure google one is smoother but its better an leaner than stock, we'll see if ill be able to root it properly and all that
sandorex said:
I flashed it works ok, can't say it's that smooth i feel like pure google one is smoother but its better an leaner than stock, we'll see if ill be able to root it properly and all that
Click to expand...
Click to collapse
this is the initial official version of Project Elixir GSI ....Not normal to be a official . let see next update.
I just saw that there is a new version:
ProjectElixir_3.6_gsi-13.0-20230223-1108-OFFICIAL.img.xz
Can anyone say anything about this?
spedyy said:
I just saw that there is a new version:
ProjectElixir_3.6_gsi-13.0-20230223-1108-OFFICIAL.img.xz
Can anyone say anything about this?
Click to expand...
Click to collapse
Yeah, I shared a T220 GSI about it in the same week it released in another thread a month ago, so uh...not new. It's stable.
Installed on my Galaxy Tab A7 Lite T220 working ok but when pushing menu from below the menu is strait, theres any way to fix it?
fabioken said:
Installed on my Galaxy Tab A7 Lite T220 working ok but when pushing menu from below the menu is strait, theres any way to fix it?
Click to expand...
Click to collapse
In order to fix that you have to go into settings>display>minimum width, and set the vallue to 598 px. you will lose the taskbar but the app menu will be displayed properly.
Anybody having problems with usb connected on PC and tablet not showing as storage?
using on samsung SM-T225 and file transfer is greyed out.
Tried multiple cable which works on other devices.
I used the ProjectElixir_3.8_arm64_bgN-13.0-20230526-1530-OFFICIAL.img.xz image.
froid_san said:
Anybody having problems with usb connected on PC and tablet not showing as storage?
using on samsung SM-T225 and file transfer is greyed out.
Tried multiple cable which works on other devices.
I used the ProjectElixir_3.8_arm64_bgN-13.0-20230526-1530-OFFICIAL.img.xz image.
Click to expand...
Click to collapse
Only Android 12,13 >Must selected_ Developer options>Default USB configuration>file transfer
tom.android said:
Only Android 12,13 >Must selected_ Developer options>Default USB configuration>file transfer
Click to expand...
Click to collapse
Thanks for the quick reply, it works now.
So far everything works great on this image, Thanks for your team's hard work!
Hello, its me again, I'm trying to migrate my account to this GSI it seems the tablet is not detecting my yubikey, do i need to change the default USB configuration to a specific option? Switched it to no data transfer and still no go, not sure if I'm missing something
USB keyboard seems to work fine.
froid_san said:
Hello, its me again, I'm trying to migrate my account to this GSI it seems the tablet is not detecting my yubikey, do i need to change the default USB configuration to a specific option? Switched it to no data transfer and still no go, not sure if I'm missing something
USB keyboard seems to work fine.
Click to expand...
Click to collapse
Sorry I don't known about yubikey.
tom.android said:
Sorry I don't known about yubikey.
Click to expand...
Click to collapse
it's one of those FIDO security key/USB Authenticator key.