I dont know what happend with my device but as usual, it bricked. Last time it was seem operational was in fastboot. Both of the options unlocked. It looks like it works because it shows up on fastboot ADB but no image, no light, no vibration and nothing at all. I tried a lot of things but none of them works. My build number is: ANE-LX1 9.1.0.405(C109E9R1P3)
PLS HELP
Related
First of all, I want to apologize if I put this question in a wrong section or place. I'm a newbie around here at XDA and been following this since my eyes were opened for android stuff. I'M JUST REALLY SEEKING HELP. :crying:
It's been 6 months since I hardbricked my Huawei Y6. I only used it for two weeks but when I messed it up, it's been dead ever since. I have searched almost every corner of Google and XDA for a solution but none of them ever came up with one that is successful. I tried to recover it and sht to no avail. It's a Snapdragon 210 (MSM8909) btw, and Qualcomm. Used lots of things like QPST, EMMC DL tool, and whatever those other things are but here's really my problem..
Huawei Y6 has no firmware available online. If there is, only that ****ty UPDATE.APP. I did extract it and I don't know what to do with these files. There's no PROG_EMMC_FIREHOSE_8909.MBN, the PATCH0, and that other one which are what I am supposed to be using with QFIL. Anyway, NO DOWNLOAD MODE, NO RECOVERY MODE, NO FASTBOOT, and completely dead. I did something terrible internally to the device, I know.. messed up the partition table. I did bring it to lots of technicians around here and to the service center but all of them declined and denied me saying that it's dead and must be replaced. But if plugged in to a computer, LED will slowly blink Red. And.. it's detected as Qualcomm HS-USB QDLoader 9008.
Please help me.. 6 months = no phone = DEAD. </3 I know that this phone is not that popular because there's not that much things about this online. I really want to have this fixed.. I'm willing to do everything possible in return. Just help me. This is last resort and my only hope. HELP MEEEE. Thank you, XDA.
Update.. I somehow did something nice to it. It now can access fastboot but do not boot.
I got it in progress. Flashed system.img, boot.img, recovery.img, through fastboot flash and erased userdata and cache. If I turn it on, will just vibrate once. Can't enter recovery nor normal boot. But if plugged in, will be detected as Android Bootloader Interface. HELLLPPPPP!!!
And now.. it got even weirder. I flashed all its stock rom files (those that were extracted from UPDATE.APP) and now when booted, LED goes to RED-GREEN-BLUE cycle. What the heck is going on with this phone? It doesn't vibrate anymore and still can't go to recovery.
i also have this phone in same 9008 port condition , is there any solution to revive this ?
how to get the files to flash with QFIL ?
dear all
did you find the solution ??
Hello,
I have a quite concerning brick on my OPX. I already succeded on unbricking one OneplusOne and another OneplusX but this one is killing me.
The status :
- Access to fastboot : OK
- Access to recovery : quite OK (install from local does nothing, does not seem to have access to partition if I'm still having any...)
- Bootloader : LOCKED (I unlocked it before but seems that the twrp flash was crappy and it locked it back...
- ADB devices returns me something, however adbs usb tell me it's closed... :crying:
I tried several times the Mega unbrick procedure, the MsmDownloadTool V2.0.exe thing and so. Each time it's quite working but remains on bootloop (One Logo and then black screen with red led lit).
Is there per change anyone who could have some clue on how to fix this if fixable ?
Thanks
Subject closed. Actually OP support made a session and had a better version of the reinstallation tool and it worked........ Still strange that the tools of unbrick pack did not worked.
Strange thing however, the storage capacity is only 9Go instead of 16Go now... But that's another story..
Hi hope someone can advise as I'm loosing the will to live
I've a mate 8 NXT-L29C636 which I believe is asia region although I've from the UK
I was running stock android 6 with EMUI 4.0
When I ask it to check for any update, it always came back with no updates.
I saw plenty of threads saying they had updated to android 7 and 8 and how they done it.
So I downloaded Firmware Finder from Google play and without too much difficulty managed to start installing firmware. That's when my problems started
This was two weeks ago and I've been spending 100+ hours trying to recover.
I think it failed a 5% or something and since then my phone will not boot properly.
I can only fastboot it and sometimes to erecovery and EMUI to wipe/factory reset
Searching forums it seems DC Phoenix was the only software that could help so I bought it.
So far I've tried flashing firmware from DC-Unlocker site in standard more but all goes ok with success for all the partitions but it requires the phone to put into upgrade mode, something my phone never does and I can't force it.
So that leaves me with advanced mode, again all successful but booting the phone just gives the huawei logo then reboots again
I've tried different stock roms NXT-L29C636 but they all claim successful but still can't boot my phone
I've followed the steps in DC-Phoenix instructions to no avail.
The last step today meant shorting a pin to ground to force the phone into a mode when it was seen as windows as Huawei USB COM device, which seemed to work.
The instructions claimed I can use any NXT board flash as they're all the same and again all successful i used
NXT-AL10_M00A102_Board Software_Global _Nonspecific_Android 6.0_EMUI 4.0_05021WLB_4.dtwork
but the log file now says build is;
Build number: HLNXTAL10BM00A102
Model: HUAWEI NXT-L29
Battery state: 3249mv
from
Build number: :NXT-L29C432B192
Model: HUAWEI NXT-L29
Battery state: 7035mv
So my question is am I using the wrong firmware? It is always successful so I don't think it's bricked but I can't work out what I'm doing wrong.
Other things to mention is pressing vol - and vol + and power with sd card and dload doesn't work either.
Sorry for long post and thanks for reading
Any help very much appreciated
Hello, I bought a used mi9t and knowing that it had a boot problem (this is what the seller wrote in the sale description) and naively believed that I would be repaired easily as I had already done before.
the mi9t starts but freezes after + - 5 sec and reboot and so on, so I do not have time to do a reset, activate develop mode, unlock the bootloader etc ...
I arrived started in recovery and or in fastboot, a wipe data does not change anything, I of course tried to flash via miflash and miflash pro etc ... but as the bootloader is locked, develop mode not active etc ... nothing did not work. I managed to flash once in recovery, assistant mi but it did not change anything although the attempt arrived at 100%, I tried this method again but it does not want to do it anymore.
it is in miu in V11.0.5.0.QFJEUXM so I tried with the following but without result.
Looks like Android isn't complete, I think the person who sold it to me missed the Flash.
there I do not know what to do, I looked everywhere on the net for a solution but found nothing so as a last chance, I post here and elsewhere while crossing my fingers.
thanks in advance
I tried all these rom but without result
and via miflash I have the error anti rollback check error
error sorry
Try china newest rom with fastboot
Hello,
1 week ago i was using my xiaomi mi 10 , and of all a sudden it crashed.
since then it is stuck in a bootloop.
The phone was stock, bootloader still locked. i tried to restart with the recovery and in safe mode with no luck. I tried to reboot it via fastboot continue and still no luck.
I replaced the battery and the volume and power on buttons (sometimes they cause shortage).
But still the phone can't boot properly.
Now i know the obvious thing to do is a complete wipe, but there is some data on the phone that i would like to save.
I tried installing the chinese version of mi pc suite, but i can't really do much from there, since my phone is updated to the V13.0.6.0.SJBEUXM, last european version. I was hoping that by updating it i could make it work.
I ask you guys if you know anything that can help me, i cannot install any recovery because the bootloader is still locked, and by unlocking it i will lose all data.
Thank you in advance.