My phone is Micromax A310.
TWRP is installed and Device is rooted by Supersu. But when i install a custom rom other than android version 4.4.2 in it it shows (error 7) and in fastboot mode it shows black screen with two lines which are
=> Fastboot mode
=>Fastboot mode
Try to clear cache before flashing Rom. Anyway this forum is mostly dead now, I'm surprised someone is still using A310
Related
I tried to install a new rom(cynogenmod 11 from xda forums) in my lenovo a6000 which i god a day before on my birthday. it had lollipop os and i installed TWRP recovery in it. but the instructions for installing rom said to clear data. dalvik, cache before installing and the twrp cleared cache and delvik cache but then it had been over 5 min and it still stated -"formatting data by mounting(bla... bla...) method". so i just reboot the phone by removing the battery and booted in the recovery again. i tried to clear them again but this time all of those three stated mounting problems while clearing. i went on installing the rom but it stuck too stating only these lines:-
1>no md5 checksum found.
2>skipping md5 checksum(bla.. bla...).
so i did the same mistake again and removed the battery to reboot but now it just shows the lenovo logo on bootup and nothing happens thereafter except frequent restarts. i tried to connect it to pc to load recovery via minimal adb and fastboot but the phone is just charging itself via usb cable and not connecting to the pc no matter i reinsert the battery.
i dont want to reach the service center or my dad will kill me for damaging a new phone. please if anyone can help then reply soon or i am gonna screwed.
Just press volume - & power key same time , now your phone is in boot loader mode now connect USB & flash twrp recovery through minimal adb method & restore your backup
Sent from my Lenovo A6000 using XDA Free mobile app
To be continued
Oh I somehow figures it out, I pressed all the keys I.e. volumeup + volumedown + power key even after the Lenovo powered by android logo and it suddenly booted into recovery. This method worked in my bq s37 I didnt expected it in this case. BTW thanks for your support and can u please help in in a new case related to same. The twrp recovery for a6000 lollipop is not installing cm11 properly. Every time I install using the same method as mentioned in a post of XDA. After installation it stops on the same screen:- Lenovo (powered by android) and after that no reboot just that screen forever till the battery dies. I even tried cleaning /system before installing cm11 ROM but still no progress. Please help!
You cannot install cm11 on top of stock Lollipop rom
Revert it back to kitkat flash recovery Then install cm11
Get it of one problem and the other awaits. Now when installing KitKat rom (the official one from techotally) it said unable to mount /data. I followed some tutorial which asked to write some codes from adb shell menu. One of the codes said something like -kill recovery, after what my recovery frooze. I restarted the phone by removing the battery but nothing is happening after that. I am trying to restart it in recovery or in bootloader or even normal restart. Everything in vain and nothing is shown on screen and not even boot logo or the lenovo powered by Android screen. But in my pc some drivers started installing out of which two were installed and two weren't please help.
Ahmad Tawfik said:
Follow this guide
QUOTE]
There is said that ensure the devise is connected as Qualcomm his 9008 drivers but for me windows iinstalls 9006 drivers and States failed to verify signature. I manually installed the 9008 drivers . the installed properly without error but in not cases m getting sahara error. Failed to download. Also my phone doesn't display anything, no display, no sound and no vibrating while powering on but the PC connats it as as Qualcomm hs..............
Click to expand...
Click to collapse
*in both the cases*
Ok I will help you
1- Download stock Lollipop firmware and place it in your sd and insert it in your phone
http://phonedl.ota.lenovomm.com/dls/v6/Kraft-A6000_S054_150915_WCAA.zip
2-hold volume down and power key and you will see fastboot under powered by Android
3- use fastboot to flash and boot into stock Lollipop recovery
Fastboot flash recovery recovery.img
Fastboot boot recovery.img
http://www.mediafire.com/download/gcg2klu8fwam2sk/Recovery.img
4- in Stock recovery factory rest and wipe cache partition
5- apply update from Sd and select the stock Lollipop firmware the you placed on SDCard
6- Done your phone will boot to system successfully
If you want to install cm11 after fixing your phone
1-revert to kitkat stock firmware follow the guide (like the phone is bricked)
2- Install twrp recovery by fastboot
http://lenovo-forums.ru/index.php?app=core&module=attach§ion=attach&attach_id=36985
3- Install cm11 and enjoy
Note:
place the files you want to fastboot in the fastboot folder
Sent from my GT-I9300I using Tapatalk
You are not correctly getting it my friend. i said the phone doesnt boot at all no matter what key combinations are tried. it simply doesnt start. no display no vibration no sound nothing just the pc detects it as qualcomm hsusb.........
BTW in the mean time my father got to know about this condition. he scolded me but asked to fix it if i can before going to service center. i was just thinking what if they got to know that i rooted the phone? or installed custom recovery in it? anyway if i am to go to the service center the statement given by me will be that:- while updating via ota from kitkat to lollipop the battery died and this all happened. an yes i live in INDIA time zone=+5:30 GMT so tell me when i can find you online(time?) my friend so we can try fixing my phone also it will be help full if we become friends on facebook? so that we can chat live clearly and for as long as we want. so that i can ask you about any problem occouring in future directly without creating a forum in xda. so please buddy please....... .... .. .
The Boy Who Cried Wolf said:
You are not correctly getting it my friend. i said the phone doesnt boot at all no matter what key combinations are tried. it simply doesnt start. no display no vibration no sound nothing just the pc detects it as qualcomm hsusb.........
BTW in the mean time my father got to know about this condition. he scolded me but asked to fix it if i can before going to service center. i was just thinking what if they got to know that i rooted the phone? or installed custom recovery in it? anyway if i am to go to the service center the statement given by me will be that:- while updating via ota from kitkat to lollipop the battery died and this all happened. an yes i live in INDIA time zone=+5:30 GMT so tell me when i can find you online(time?) my friend so we can try fixing my phone also it will be help full if we become friends on facebook? so that we can chat live clearly and for as long as we want. so that i can ask you about any problem occouring in future directly without creating a forum in xda. so please buddy please....... .... .. .
Click to expand...
Click to collapse
My Facebook is [email protected]
I prefer hangout
[email protected]
Contact me any time and I will try to reply directly
Sent from my GT-I9300I using Tapatalk
After flashing the firmware link given by u , Ota will work or not ?
Sent from my Lenovo A6000 using XDA Free mobile app
amit1009000 said:
After flashing the firmware link given by u , Ota will work or not ?
Sent from my Lenovo A6000 using XDA Free mobile app
Click to expand...
Click to collapse
It will work and also this is the latest update
Sent from my GT-I9300I using Tapatalk
I know but only this update is not installing in my device 138mb , so i thinking to flash the full lolipop with this update by ur given link . can i do it ?
Sent from my Lenovo A6000 using XDA Free mobile app
amit1009000 said:
I know but only this update is not installing in my device 138mb , so i thinking to flash the full lolipop with this update by ur given link . can i do it ?
Sent from my Lenovo A6000 using XDA Free mobile app
Click to expand...
Click to collapse
Yes
Sent from my GT-I9300I using Tapatalk
Ahmad Tawfik said:
Ok I will help you
1- Download stock Lollipop firmware and place it in your sd and insert it in your phone
2-hold volume down and power key and you will see fastboot under powered by Android
3- use fastboot to flash and boot into stock Lollipop recovery
Fastboot flash recovery recovery.img
Fastboot boot recovery.img
-- in Stock recovery factory rest and wipe cache partition
5- apply update from Sd and select the stock Lollipop firmware the you placed on SDCard
6- Done your phone will boot to system successfully
If you want to install cm11 after fixing your phone
1-revert to kitkat stock firmware follow the guide (like the phone is bricked)
2- Install twrp recovery by fastboot
http://lenovo-forums.ru/index.php?app=core&module=attach§ion=attach&attach_id=36985
3- Install cm11 and enjoy
Note:
place the files you want to fastboot in the fastboot folder
Sent from my GT-I9300I using Tapatalk
Click to expand...
Click to collapse
But why don't u understand that I can not boot in any mode the danm phone simply doesn't display anything no sound or vibrations and no change of mode too.just connected as quallcomm hsusb and nothing else and even with that and following the ways in the link provided before(boycracked unbrick a6000) I'm getting sahara download error.
Not Install
Dear
Ahmed
When I am try to install the zip its give an erro
phone does not switch to carrier can not install
status (101)
installation abbroat
Please help to install it.
amit1009000 said:
Dear
Ahmed
When I am try to install the zip its give an erro
phone does not switch to carrier can not install
status (101)
installation abbroat
Please help to install it.
Click to expand...
Click to collapse
You have to install it from stock recovery and to factory reset and wipe cache partition before installing the zip
Lenovo updates are very bad and may soft brick you phone
Sent from my GT-I9300I using Tapatalk
install
i tried with stock recovery but same problem.
So it seems I'm being ignored
Hey ahmed
Hello guys, I rooted my micromax canvas 5 e481 using this method (http://forum.xda-developers.com/andr...fever-t3242640) unlocked oem then gradually installed cwm and then rooted and it worked but now I wanted to unroot my phone so downloaded the dump backup of the recovery.img in the post mentioned .i had cwm and wanted to replace with default recovery img. I flashed the recovery.img through adb and after reboot I couldn't return to recovery mode but I didn't loose my root access or any data. Whenever I was trying to reboot to recovery it was bringing me back to the home screen so I opened bootloader and again gave the command 'fastboot oem unlock' and then 'fastboot flash recovery recovery.img' .After this my device is stuck in canvas logo which is coming and going no volume buttons are working to take me to bootloader or recovery. It's stuck there. Please help
Just download the stock ROM and flash it using SP flash tool
I recommend you to install TWRP and flash the supersu package
https://forum.xda-developers.com/android/development/micromax-e481-rustom-rom-t3647753
RR updated for micromax canvas 5 https://forum.xda-developers.com/android/development/micromax-canvas-5-e481-ressurection-t3667680
Harishwarrior said:
RR updated for micromax canvas 5 https://forum.xda-developers.com/android/development/micromax-canvas-5-e481-ressurection-t3667680
Click to expand...
Click to collapse
My problem was solved more than a year ago. Actually the problem was with the VCOM Drivers which I didn't install on my PC. Without that I installed the SP Flash Tool and then flashed the Recovery image which left my device on a bootloop and after that I even bricked my device by flashing Rom with SP Flash Tool without drivers installed. I figured out the problem later and then with the help of recovery mode went to fastboot mode then installed the drivers on my PC and flashed the ROM. Phone is working fine now. Now downloading this custom ROM as using Lollipop for nearly 2 years. Thanx a lot for your reply Harishwarrior and for the Ressurection Remix Rom links
Try the new lineage os
https://forum.xda-developers.com/android/development/lineage-14-1-stable-micromax-canvas-5-t3673377
Harishwarrior said:
Try the new lineage os
https://forum.xda-developers.com/android/development/lineage-14-1-stable-micromax-canvas-5-t3673377
Click to expand...
Click to collapse
Harish I installed the Ressurection Os . But no Gapps. So need the link for Gapps and the step you mentioned
"6. Go to settings > Developer option > Enable Force Gpu rendering and HW overlays and Force 4xMSAA. Always use MX Player for playing video, Select HW+ for better quality and performance.
7.Paste this line in build.prop
debug.sf.hw=1
debug.performance.tuning=1 video.accelerate.hw=1
debug.egl.profiler=1
debug.egl.hw=1
debug.composition.type=gpu"
Is this necessary?
After using this Rom for some time will use the Lineage OS
only try this if you have video playback issue
Micromax Canvas 5 Bootloop Restarting on Logo
Micromax canvas 5 restarts continuously on Logo means device restart it shows micromax logo and then again restarts.
I completed the process of bootloader. then flash TWRP 3.0.0 and then opted for the command "fastboot reboot", then next the phone just restarts on the logo, never rooted this phone before it was first time.
Tried pressing Volume Up + Power it even does not go in fastboot or recovery mode, it just keeps on restarting.
Please Help urgently.
Official Support And Development For L5460 Devices
Wiko Fever 4G - France
Wiko Fever SE - France
My Phone My36 - Philippines
Q Mobile Noir 4G - Pakistan
Micromax Canvas 5 E481 - India
Blu Life One X(2016) - America
Casper Via M1 - Turkey
Telegram:
https://t.me/teammaxmtk
Facebook:
https://www.facebook.com/groups/673560846179945/
I have bricked my micromax a311 as I was trying to flash custom rom i have flushed old rom and by mistake I have restarted mobile after doing that and now its stuck in logo. Main problem is Mobile showing in factory mode not able flash from ygdp and not getting boot in recovery as adb showing unauthorized or not detected and I cant swith on adb from developer mode as mobile is bricked and full os is deleted. If any how i can boot in recovery i can flash rom but its not happening nether it getting flashed from ygdp or sp flash tool. Please provide me solution for getting my mobile alive.
aalia12 said:
I have bricked my micromax a311 as I was trying to flash custom rom i have flushed old rom and by mistake I have restarted mobile after doing that and now its stuck in logo. Main problem is Mobile showing in factory mode not able flash from ygdp and not getting boot in recovery as adb showing unauthorized or not detected and I cant swith on adb from developer mode as mobile is bricked and full os is deleted. If any how i can boot in recovery i can flash rom but its not happening nether it getting flashed from ygdp or sp flash tool. Please provide me solution for getting my mobile alive.
Click to expand...
Click to collapse
You can still connect your phone via USB....copy your custom rom((probably a stable one) files into the phone and boot in recovery to install that rom again...best of luck..
Wassup aliens!
So I got this gionee M3 and I rooted it with iRoot and tried to flash recovery in nearly every way possible....... I tried using Flashify, Rashr, TWRP manager..... Nothing worked.
1) On Flashify: I kept selecting Flash recovery but the message I get every time is "Error copying the file, please send me the log file".
2) On Rashr and TWRP Manager: They both say they flashed the file but when I boot into recovery all I see is gray screen with a gionee logo. I also lost my stock recovery this way.
3) On PC: My PC never detects my phone as an adb or VCom device........To check for VCom I tried SP Flash Tools..... didn't detects the device. For Adb I tried Adb devices in command prompt but the devices list is empty.
Some info:
I have USB debug mode enabled.
I have stock 5.0.2 android rom with no recovery just factory safe mode through which I can perform some tasks.
If you need any pics or any info just tell me in the comments.
I hope you guys help me.... Been trying for the last 6 days.
HELP ASAP SOS
Love,
Justin Biebar
Tarun0101 said:
Wassup aliens!
So I got this gionee M3 and I rooted it with iRoot and tried to flash recovery in nearly every way possible....... I tried using Flashify, Rashr, TWRP manager..... Nothing worked.
1) On Flashify: I kept selecting Flash recovery but the message I get every time is "Error copying the file, please send me the log file".
2) On Rashr and TWRP Manager: They both say they flashed the file but when I boot into recovery all I see is gray screen with a gionee logo. I also lost my stock recovery this way.
3) On PC: My PC never detects my phone as an adb or VCom device........To check for VCom I tried SP Flash Tools..... didn't detects the device. For Adb I tried Adb devices in command prompt but the devices list is empty.
Some info:
I have USB debug mode enabled.
I have stock 5.0.2 android rom with no recovery just factory safe mode through which I can perform some tasks.
If you need any pics or any info just tell me in the comments.
I hope you guys help me.... Been trying for the last 6 days.
HELP ASAP SOS
Love,
Justin Biebar
Click to expand...
Click to collapse
Hey i have the same problem. Can you suggest me something regarding this.
A very big question
Hello! I have an argentine copy of the M3, called Hyundai Ultra Energy, same processor, same storage, camera quality, all in the same place. My question is how do I install a custom rom and how do I flash the recovery at first. I use adb commands, but I know that I have to do it with spflash. How is the process? I download the rom, charge the scatter and tilt only in recovery? Would be dangerous? Is more safe to root with King Root?
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system, functions often unsupported by stock recovery images. It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
DOWNLOAD
TWRP 3.2.3.0
Flashing Instructions
Make sure you have fastboot drivers installed and your bootloader is unlocked
Download the file
In fastboot open the directory of downloaded file and type
fastboot flash recovery recovery.img, after that type
fastboot oem reboot-recovery, You'll have a black screen on your display wait for 5-10s you'll be greeted with TWRP screen if you still didn't get the screen then press power button 2-3 times
BUGS
Data decryption ( For this you need to select Wipe -> format data (You'll lose all your data in this process) )
No Battery% ( I purposefully disabled it as the battery% always stays at 50% so I'll find the battery% path and fix this in the next build)
Flash force encrypt disabler in recovery to fix magisk module installation and other data partition related issues.
Source Code: TWRP source, Device Tree and Kernel Source
Tried to install recovery twrp v 3.3.0 and 3.2.3, stuck in bootloop flashing recovery is successful but while rebooting its continues in loop after showing lenovo sign (Orange Mode), started due to reboot problem, oem unlock was successful as well, please help
pankajyadav_18 said:
Tried to install recovery twrp v 3.3.0 and 3.2.3, stuck in bootloop flashing recovery is successful but while rebooting its continues in loop after showing lenovo sign (Orange Mode), started due to reboot problem, oem unlock was successful as well, please help
Click to expand...
Click to collapse
By reboot problem if you mean, the phone getting restarted randomly in loop then the only way to fix it is to go to the service center.