After successfully flashing Linageos 19.0 vanilla build (no gapps) on Infinix smart 5 x657
I decided to get Bitgapps zip file
and because I don't have a custom recovery I used flashify app to flash Bitgapps.
But during the process the device just went off and I haven't been able to turn it back on.
Doesn't even bootb into bootloader or fastboot or recovery.
Also it wasn't detected by the pc i connected to
Related
Hello there
I want to install custom rom on my android (android 5.1 cynogen 12.1) for that i flashed custom recovery on my android but after many tries it was not working only company logo appear. my friend suggested me to flash custom bootloader and i did that. but after that my mobile is neither booting or going into recovery mode. Usb debugging is also turned off.
Any solution??
I can go to flashboot mode but my computer is not recoganising my device. win 10
So, I have an XT1723, a Moto C Plus. Following @shr!pad's guide, I was able to install TWRP on it, and flash SuperSU with the SYSTEMLESS=true modifier in /data/.supersu...
...however, the phone now will not go past the bootloader; it hangs indefinitely.
So I tried sideloading the LineageOS 14.1 ROM from here over ADB while in TWRP. It goes to the booting screen, the one with the blue arch and the bubbles travelling along it...and it stayed there for 8 hours overnight. Still doing it this morning. I then tried the 15.1 ROM; same result. Flashing via ADB Sideload mode led to the same problem. Magisk didn't help either.
Therefore, I decided to go back to stock rom. I found a stock ROM archive, which had SP Flash Tool and a Scatter file for the entire memory map of the device. This worked when I flashed TWRP...but now, I get BROM (2004) errors, no matter which computer and which USB port I use!
Bhai, did I break my phone forever? How do I fix this?
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system, functions often unsupported by stock recovery images. It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
DOWNLOAD
TWRP 3.2.3.0
Flashing Instructions
Make sure you have fastboot drivers installed and your bootloader is unlocked
Download the file
In fastboot open the directory of downloaded file and type
fastboot flash recovery recovery.img, after that type
fastboot oem reboot-recovery, You'll have a black screen on your display wait for 5-10s you'll be greeted with TWRP screen if you still didn't get the screen then press power button 2-3 times
BUGS
Data decryption ( For this you need to select Wipe -> format data (You'll lose all your data in this process) )
No Battery% ( I purposefully disabled it as the battery% always stays at 50% so I'll find the battery% path and fix this in the next build)
Flash force encrypt disabler in recovery to fix magisk module installation and other data partition related issues.
Source Code: TWRP source, Device Tree and Kernel Source
Tried to install recovery twrp v 3.3.0 and 3.2.3, stuck in bootloop flashing recovery is successful but while rebooting its continues in loop after showing lenovo sign (Orange Mode), started due to reboot problem, oem unlock was successful as well, please help
pankajyadav_18 said:
Tried to install recovery twrp v 3.3.0 and 3.2.3, stuck in bootloop flashing recovery is successful but while rebooting its continues in loop after showing lenovo sign (Orange Mode), started due to reboot problem, oem unlock was successful as well, please help
Click to expand...
Click to collapse
By reboot problem if you mean, the phone getting restarted randomly in loop then the only way to fix it is to go to the service center.
I Installed an android 10 custom rom called pixel exp..on my redmi 5 plus which was at android 8 . Everything was fine except my phone didn't charge.so i installed another custom rom but it was the same. So i went to Xiaomi fastboot tool and flashed stock rom but it stuck on mi logo. So i cant boot stock rom and when in custom rom , it only charges when my phone is in recovery mode.
What to do?
@sriram000
Force device to reboot normally
Code:
fastboot reboot
@jwoegerbauer
When to reboot using fastboot ? U mean when stuck at that mi logo
i tried to flash the PIE US99830b TWRP zip (was on OREO h) via TWRP. Got stuck at V30 boot logo. OREO was correctly flashed last year and havent had any issues.
Attempted to factory wipe via power+vol down and it goes back to boot screen. I also cannot power down the phone. I was able to get to download mode by usb+vol up after the factory wipe screen. I've tried 2 different versions of the patched LGUP. One being the pie version and the other, the original version i used to flash OREO. Both say no handset connected. I see no device in device manager on my pc. I know my usb cable is working because the device will show up when i plug the usb in during the boot logo hang.
Download screen shows:
Unknown B35
Unknown / E /L / RQ
is my device hard bricked?