My j7elte's power button is broken, how to turn it on now? it is stuck in recovery. Thanks everyone
This
I have tried removing the button, and I have successfully booted my phone afterwards because after removing the button, I manage to press the "real" button afterwards
Related
Hello,
i want reinstall TWRP, after reboot i have a bootloop "amazon".
I have no ideo, what can i do.....
can me someone helf?
Thanks
Hold Power Button + Left Volumen Button, when you get into recovery just select apply an update and then just connect your kinder to the computer
and now Im going to let you this video
https://www.youtube.com/watch?v=RQLoH-ahjy4
I tried to root and install gapps follow this tutorial. Everything work perfectly.
One day, my Fire's battery was empty and it turned off. I charged it and when it started, it falt in bootloop. The screen show amazon about 8sec and reboot.
I booted into twrp and flashed only 2 files update-kindle-full_ariel-20.5.2.2_user_522053520 and supersu, try to make it work but it didn't
Now, when i hold power button , "Amazon" and then "Fire" appear and it stuck there.
I tried to get into recovery by power and volume+ but didn't work, the screen show "Amazon" and reboot and stuck on "Fire" again.
What should I do now?
Sorry about my English.
pmiller86 said:
Hello,
i want reinstall TWRP, after reboot i have a bootloop "amazon".
I have no ideo, what can i do.....
can me someone helf?
Thanks
Click to expand...
Click to collapse
1.Completely shut down the device(by pressing power down button for about 20s)
2.Try the Power + Vol Up combo again(keep them pressed until amazon logo disapears)
3.If you don't see anything, try twice or thrice again
If you are finally able to get access to TWRP, then follow my instructions here :
http://forum.xda-developers.com/fire...1#post64593294
Hope i helped
Ok so i rooted my phone i format him and when he restarted it's stuck to boot logo but the lockscreen works and everyting and there is only home button and back button. How to hard reset the phone ? I think it's not bricked, there is no welcome Setup
Well, to hard reset the phone, its simply hold the power and volume up button, and may I ask how you rooted your phone, just need to make sure you did it correctly
If you can get into bootloader (I think its power+volume up) you can use the volume keys to navigate to factory reset, and press power. Rooting your 610 with windroid is the most easiest, I recommend you trying Windroid root tool. It flashes a recovery and roots
volume down and power button when phone is off.. if the phone wont turn off volume button up and power button for around 10 seconds
hope this helps
White Boot Screen with LOGO
Folks,
Similar issue, Was loading a new ROM onto HTC Desire 610 but forgot to clear Devlik Cache.
Screen now stuck in "White Boot Screen with LOGO"
Power Button with VolumeUp or VolumeDown does nothing,
Power Button with VolumeUp AND VolumeDown reboots phone but back to same screen i.e. boot sequence does not complete.
adb or fastboot can not see the device anymore.
Any suggestions / help be greatly appreciated.
[Solved]
I left the phone overnight and phone/battery died. Following morning was able to to use adb and recover phone
barryjj1965 said:
Folks,
Similar issue, Was loading a new ROM onto HTC Desire 610 but forgot to clear Devlik Cache.
Screen now stuck in "White Boot Screen with LOGO"
Power Button with VolumeUp or VolumeDown does nothing,
Power Button with VolumeUp AND VolumeDown reboots phone but back to same screen i.e. boot sequence does not complete.
adb or fastboot can not see the device anymore.
Any suggestions / help be greatly appreciated.
Click to expand...
Click to collapse
Hi, I really need help with my TWRP Recovery
In the middle of my ROM Installation, it froze for a bit and then restarts to my boot log and it stucks there. I have to press button Volume Up, Power and Menu Button altogether just to go to the recovery once more.
My brother fergot his password and therefore I need to factory reset the device using the recovery.
However, Volume up+ Power doesnt work for me, screen just goes black for a few seconds and it boots normally.
Anyone facing this issue too?
I have the Platinum 55d but...
I had trouble getting into recovery mode myself and this might help you.
Press and hold the power button and shortly thereafter press and hold the volume up button. Wait for the brand to load up and let go of the power button.
Wait for the android to show up. If it doesn't and the phone starts up normally, take out the battery and try again.
Once the android shows up hold the power button and tap the volume up button.
Same problem
I have the same problem
i start phone and try every way to get into recovery but cant get it on
did you find a fix?
me too! pls help!!
Thinking you can flash it with Sp-flashtool or http://www.mediafire.com/file/cgy6j622oq4lv7n/FACTORYDOWNLOAD_R2.9.9015.zip + driver
Offical firmware link etc. https://forum.xda-developers.com/android/help/archos-50c-platinum-archos-50cpl-twrp-2-t3594137
Btw sometimes it hard to boot into recovery so i use xposed to do that.
Old LG G5 I had previously installed Lineage on. Was in a drawer until I decided to charge it up and let one of my kids play games on it. When I input the correct screen lock pattern, it goes black, then comes back to lock screen.
I am able to hold power button to then select power off, restart, etc. From power off, I power on and get the orange triangle recommending to lock the bootloader. But no combination of power and vol-down or power and vol-up will get me to TWRP. It just rolls right back in to Lineage.
Also, from power off, if I plug in to my Linux laptop, it will power on and go to fastboot.
Feels like USB debug got turned off and/or trust somehow got revoked, but I never had this laptop connected to it so probably doesn't matter. But like I said, my unlock pattern is working. I get different response with correct pattern versus incorrect.
I'm also able to see the phone from my https://google.com/android/devicemanager page. I tried to send a secure and erase thinking it might let me start from scratch, but I only see a notification that "Device Located" and it never does anything.
And finally, lsusb -v does see the phone, but adb devices never does.
My question is any idea how to get back to TWRP to wipe and push an updated image or even put an updated TWRP?
Try this ...
It's like getting into Stock Recovery. To get into TWRP Recovery using button combination (hard reset) you'll need to hold volume down button and power button simultaneously, releasing power button (temporarily) once LG logo appears then quickly pressing and holding power button again, all the while maintaining hold on volume down button. The stock recovery message (white background) will appear requiring you to select volume up/down button to continue to reset software (see attached image). If you select yes it will appear to factory reset but will actually boot into TWRP.
Hope that helps!
Aimless Rambler said:
It's like getting into Stock Recovery. To get into TWRP Recovery using button combination (hard reset) you'll need to hold volume down button and power button simultaneously, releasing power button (temporarily) once LG logo appears then quickly pressing and holding power button again, all the while maintaining hold on volume down button. The stock recovery message (white background) will appear requiring you to select volume up/down button to continue to reset software (see attached image). If you select yes it will appear to factory reset but will actually boot into TWRP.
Hope that helps!
Click to expand...
Click to collapse
That did the trick! Thanks a ton.
dwcasey said:
That did the trick! Thanks a ton.
Click to expand...
Click to collapse
Good to hear!