Related
HELP !!!
My H9 was under OREO, using the page: https://forum.xda-developers.com/honor-9/how-to/stf-l09c432-how-to-install-oreo-h9-t3707729
The device is unlocked
Because of SNAPCHAT root detection, i removed completly SuperSU from my phone... very bad idea.... as my phone doesn't start anymore
The blank/green droid page display the following message:
ERROR MODE
Attention please update system again
Error!
Func NO: 10 (boot image)
Error NO: 2 (load failed)
----------------------------------
I can enter fastboot and nothing else !!!
Any suggestions ???
Thanks
Olivier
You must repack from your UPDATE.APP these files:
Recovery.img
Kernel.img
Ramdisk.img
And flash these files via fastboot.
Wysłane z mojego STF-L09 przy użyciu Tapatalka
As i upgraded using OldDroid's steps, i don't have these files. I just have the following ones:
RAMDISK.img
RECOVERY_RAMDISK.img
SR5-2.82-supersu_ramdisk.zip
STF_RECOVERY_NoCheck.img
STF_RECOVERY_OREO_NoCheck.img
twrp-3.1.1-nougat-stf.img
twrp-3.1.1-oreo-stf.img
update_rollback_al10c00b190.zip
and
L09-B321/update_data_full_public.zip
L09-B321/update_full_STF-L09_hw_normal.zip
L09-B321/update.zip
And, as partitions are different in Oreo, i m not sure i can flash the previous files (from L09-B321)...
(my phone is from EU)
Unzip UPDATE.APP contained inside L09-B321/update.zip .
Then open the previously extracted UPDATE.APP with this app:
https://forum.xda-developers.com/showthread.php?t=2433454
Then follow previous post from @kac222
Thanks :good: for all the details... one last (i hope) question regarding extracted files: could you please let me know which *exact* filename i should flash for recovery, kernel and ramdisk among this file list ?
(reminder: my H9 was running Oreo )
Code:
CACHE img
CRC img
CURVER img
DTS img
ERECOVERY_KERNE img
ERECOVERY_RAMDI img
ERECOVERY_VBMET img
ERECOVERY_VENDO img
FASTBOOT img
FW_HIFI img
FW_LPM3 img
HISEE_FS img
HISEE_IMG img
HISIUFS_GPT img
ISP_FIRMWARE img
KERNEL img
MODEM_FW img
MODEMNVM_UPDATE img
ODM img
PACKAGE_TYPE img
PRODUCT img
RAMDISK img
RECOVERY_RAMDIS img
RECOVERY_VBMETA img
RECOVERY_VENDOR img
SENSORHUB img
SHA256RSA img
SYSTEM img
TEEOS img
TRUSTFIRMWARE img
VBMETA img
VECTOR img
VENDOR img
VERLIST img
XLOADER img
fastboot flash recovery_ramdisk RECOVERY_RAMDIS.img
fastboot flash ramdisk RAMDISK.img
fastboot flash kernel KERNEL.img
fastboot reboot
Wysłane z mojego STF-L09 przy użyciu Tapatalka
Guys,
I would like to sincerely THANK YOU for your help and being so responsive !!!
(as you probably guessed: it works ! )
Sagit Logo Generator for Xiaomi MI 8 (dipper)
Download: here
How to use (Windows)
1. Download this project and goto GenLogo folder.
2. Edit these 5 bmp files, do not change filename or format.
3. Run GenLogo.exe and you get logo_new.img.
4. flash through fastboot
HTML:
fastboot flash logo logo_new.img
5. Enjoy!
How to use (Linux&Unix)
1. Download this project and goto GenLogo folder.
2. Edit these 5 bmp files, do not change filename or format.
3. Run python genlogo.py and you get logo_new.img (python3).
4. flash through fastboot
HTML:
fastboot flash logo logo_new.img
5. Enjoy!
How to restore
Just flash logo.img in official fastboot ROM.
Source: https://github.com/moonheart/sagit-logo-gen/tree/MI8_Dipper
Thanks @huhu2207 for advice (binwalker).
Thanks @grabik.pk for test.
Thank You for your work!
Thanks for the tutorial, does the phone have to have an unlocked bootloader for this to work?
I've modified your tool to work with Xiaomi Mi Max 3. Thank you for the sources!
Thks for sharing, Can this work for Mi8Lite platina??
moonheartmoon said:
Sagit Logo Generator for Xiaomi MI 8 (dipper)
Download: here
How to use (Windows)
1. Download this project and goto GenLogo folder.
2. Edit these 5 bmp files, do not change filename or format.
3. Run GenLogo.exe and you get logo_new.img.
4. flash through fastboot
HTML:
fastboot flash logo logo_new.img
5. Enjoy!
How to use (Linux&Unix)
1. Download this project and goto GenLogo folder.
2. Edit these 5 bmp files, do not change filename or format.
3. Run python genlogo.py and you get logo_new.img (python3).
4. flash through fastboot
HTML:
fastboot flash logo logo_new.img
5. Enjoy!
How to restore
Just flash logo.img in official fastboot ROM.
Source: https://github.com/moonheart/sagit-logo-gen/tree/MI8_Dipper
Thanks @huhu2207 for advice (binwalker).
Thanks @grabik.pk for test.
Click to expand...
Click to collapse
the second step I have not guessed, you can explain more clearly and in detail. Thank you
@Paoloqu24 Edit these five images with Photoshop or other tools, but you should not rename these images.
moonheartmoon said:
Sagit Logo Generator for Xiaomi MI 8 (dipper)
Download: here
How to use (Windows)
1. Download this project and goto GenLogo folder.
2. Edit these 5 bmp files, do not change filename or format.
3. Run GenLogo.exe and you get logo_new.img.
4. flash through fastboot
HTML:
fastboot flash logo logo_new.img
5. Enjoy!
How to use (Linux&Unix)
1. Download this project and goto GenLogo folder.
2. Edit these 5 bmp files, do not change filename or format.
3. Run python genlogo.py and you get logo_new.img (python3).
4. flash through fastboot
HTML:
fastboot flash logo logo_new.img
5. Enjoy!
How to restore
Just flash logo.img in official fastboot ROM.
Source: https://github.com/moonheart/sagit-logo-gen/tree/MI8_Dipper
Thanks @huhu2207 for advice (binwalker).
Thanks @grabik.pk for test.
Click to expand...
Click to collapse
It did not work. Got this message
Code:
$ python3 genlogo.py
$ fastboot flash logo logo_new.img
target didn't report max-download-size
Sending 'logo' (20056 KB)...
FAILED (command write failed (Success))
Finished. Total time: 0.011s
$
THIS POST IS BASED ON THE ON A POST OF THE MI 9 FORUM
The Mi 9T Logo.img contains 4 images in BMP format.
1. The regular LOCKED boot screen
2. The Fastboot screen
3. The UNLOCKED boot screen
4. The system destroyed screen
Image dimensions MUST be in 1080x2340 format BMP 24Bit. (Check to see if your file size of each individual picture is 6.2MB when you create one)
During boot Xiaomi displays picture 1 and if unlocked, then picture 3. So if you want a consistent appearance you have to have both set to the same picture.
The python script is about as simple as it gets. The only annoying thing was to find the proper offsets for the Mi 9T.
Replace the images with the new ones that you would like displayed..and you are ready to run the script.
Usage of the python script would be : python mi9T_logo.py and thats it. (Of course this all depends on your environment)
Once the script is done you should see a file called : logo_new_mi9T.img in the directory.
This one you can simply flash via fastboot.
Command is like this : fastboot flash logo logo_new_mi9.img
EXTRA: you can make this without a PC! Just use the QPython app (available on Play Store) and put the bmp files on /sdcard/qpython/*here* and the script on /sdcard/qpython/script3/*here* and run the script
Source: https://forum.xda-developers.com/Mi-9/themes/mi-9-splash-boot-image-creation-script-t3952572
HOW TO USE:
-Extract and copy Android Platform Tools to same directory with *.bat file
-Create \images\ folder
-Open fastboot rom file with Winrar (or alternate) and copy all contents of the images folder to created images folder
-Double click to run *.bat file and follow instructions
NOTES:
-Works all MIUI roms included 14,13 and 12. Also works with VIETSUB custom roms.
-Device should be bootloader unlocked
-You can download Android Platform Tools from: https://developer.android.com/studio/releases/platform-tools
DOWNLOAD
Help my phone vorrupted afre use this
HOW TO USE:
-Copy Android Platform Tools in same directory with *.bat file
-Double click to run *.bat file and follow instructions
NOTES:
-Device should be bootloader unlocked
-You can download Android Platform Tools from: https://developer.android.com/studio/releases/platform-tools
DOWNLOAD
this is for what ??