I paid $15 to try and get someone to use msmtool to fix my phone, but when it's about to finish, Msmtool returns FirehoseWritedata Failed, Download Boot.img Fail, what's the problem? I'm now thinking of changing a computer and trying again
One thing to note: he tried to fix it using usb redirector+Teamviewer.
And my RUI version is 3.0 C20, and he tried to flash RUI 2.0 A12.
Related
Hello,
I had my device running slow from the moment I opened it the first time.
I know I should have take it to the warranty, but I needed the time all day.
I dropped it so I couldn't take it there anymore.
Now, since the warranty is void, I wanted to change the 5.0.2 lollipop, hoping for a normal response time from it.
I tried installing TWRP and I didn't suceed. It got stuck on the Lenovo logo.
I managed to put back a recovery from another ROM (lenovo) and used QcomDLoader.exe to flash another rom. A stock version of A6010 but of 16GB ROM not 8 like mine.
It didn't work, even if I waited more than 500 seconds (more than 5 minutes). Now, it's in black screen, won't come out of it.
I managed to find some errors with another qualcomm flash applications:
Code:
Sahara Version:0
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
Click to expand...
Click to collapse
I hope someone has an idea that could help me out. I'm trying non-stop for 10 hours now. My head really hurts, I didn't just post this here without trying to solve it myself first.
Thank you in advance for your help!
Andrei
UPDATE:
Okay, so I managed to install a 8GB A6000 firmware, but the GSM network is not working. It shows 2 sims of 2G and none is working.
I have the open source files of my original firmware on lenovo's site.
How could I replace the entire OS, so masically copy/paste the files from computer onto the phone? Or ..can I make a flash version from those files?
Thank you!
Andrei
Question: My 5x will only show in QC download mode as 9008. I have this same error for my LGH791 with the error you show above for Sahara fail. How did you overcome this? Was it the flash programmer, did you determine the cause?
Hi everybody - any help with the following problem is appreciated, I've thrown everything I can find at it but I'm just over my head at this point!
My LG G watch worked great, up until one morning when it got stuck in a bootloop - if I had to guess, the battery must have run out at the exact wrong time, during an OTA update. Maybe. Anyway, stuck in a bootloop.
I managed to install TWRP bootloader, and apparently uninstalled everything but the TWRP bootloader, as it now has the 'no OS installed!' dialogue whenever I try to exit.
I had minimal success installing ADP drivers, but never managed to make a PC/watch connection past fastboot OEM unlock. At the moment (a few months after i had that working) my PC doesn't recognise the watch at all.
So I've bought an OTG cable, and the plan is to put a flashable ROM (hey, even the stock one if I can find it) on a USB stick, navigate to it on TWRP via install, and take it from there. Anyone know if that's what I should be trying / where I can find that particular ZIP file?
Also worth noting, I never toggled on ADP debugging when the original OS was working.
Here's the info from the fastboot screen- ANY help is appreciated!
Product Name = Dory
Variant = dory 4GB
HW Version - rev_11
Bootloader Version - Doryz11c
Serial Number - 03b1175b02a23642
MSN - 406KPMZ0096923
Signing - production
Secure boot - enabled
Lock state - unlocked
Have you tried the instructions of the thread about fixing adb after the update? May work for you. I don't think the watch supports OTG...
http://forum.xda-developers.com/showthread.php?t=3347122
Use this tool for flashing:
http://forum.xda-developers.com/g-watch/development/script-lg-g-watch-tool-t2820863
Should have asked months ago
MihaiSG said:
Use this tool for flashing:
http://forum.xda-developers.com/g-watch/development/script-lg-g-watch-tool-t2820863
Click to expand...
Click to collapse
Mate... worked a dream. Thanks so much!
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been modified before it was cool.
Hi everyone, similar to the previous threads for
OP3, OP3T, OP5, OP5T, OP6, OP6T, OP7, OP7PRO, regular OP7T, T-Mobile OP7T, regular OP7TPRO, T-Mobile OP7TPro 5G, regular OP8, T-Mobile OP8 and OP8Pro here are the EDL packages (also known as MSM tools or unbrick tools) that can revive a bricked OnePlus Nord.
You can also rollback your phone to a previous release of OOS with them if for some reason you would like to go back to an older firmware
You can download the following versions:
AC01AA tools (global firmware):
ANDROID 10:
OOS 10.5.2
OOS 10.5.3
OOS 10.5.4
OOS 10.5.5
OOS 10.5.7
OOS 10.5.8
OOS 10.5.9
OOS 10.5.10
OOS 10.5.11
Mirror for first and last MSMs: https://onepluscommunityserver.com/
AC01BA tools (european firmware):
ANDROID 10:
OOS 10.5.2
OOS 10.5.3
OOS 10.5.4
OOS 10.5.7
OOS 10.5.8
OOS 10.5.9
OOS 10.5.10
OOS 10.5.11
Mirror for first and last MSMs: https://onepluscommunityserver.com/
AC01DA tools (indian firmware):
ANDROID 10:
OOS 10.5.2
OOS 10.5.3
OOS 10.5.4
OOS 10.5.7
OOS 10.5.8
OOS 10.5.9
OOS 10.5.10
OOS 10.5.11
Mirror for first and last MSMs: https://onepluscommunityserver.com/
Warning:
As this happened on OnePlus 8 and OnePlus 8 Pro Pro, it is advised to take backup of /persist partition before crossflashing (eg going from European to Indian build) as fingerprint reader may give an error related to enrollment issue. You can do so by using dd if=/dev/block/bootdevice/by-name/persist of=/sdcard/persist.img (you must have root access, see https://forum.xda-developers.com/oneplus-nord/how-to/guide-how-to-root-oneplus-nord-t4139411 for that) and moving it to your computer/cloud.
Instructions:
Launch MsmDownloadTool V4.0.exe.
On the login prompt select "Other" in the dropdown menu and click on Next.
Wait a few seconds until main window shows up.
Click on Target button and select O2 while using global tool or India while using indian tool or EU when using european tool.
Press Start button (this is done so that device will be "captured" automatically by tool instead of going back to normal boot after 10 seconds)
Power your device off.
Let it cool down for one minute.
Maintain volume up and volume down keys for at least 40 seconds to get into Qualcomm EDL mode.
Plug your device to your computer using stock OnePlus cable. (You may let volume keys go once done.)
Wait ~300 seconds.
Enjoy your brand new device.
FAQ:
Does this work on Mac or on Linux?
Unfortunately no, tool is Windows only. You should need at least Windows 7.
Why is my antivirus freaking out when unzipping the archive or running the tool?
In an effort to protect reverse engineering from being done (and by extension prevent conversion process like it was done on 6T and 7Pro), OnePlus now use VM Protect V3 in their MSM tools. As this tries to detect debug environment, this is seen as malicious behaviour by some antivirus.
My device isn't detected
Go to device manager and make sure your phone shows up as QDLOADER 9008.
If it shows up as QHUSB_BULK, it means Qualcomm driver wasn't installed automatically by Windows Update. Download the latest one from Microsoft website at http://download.windowsupdate.com/c..._fba473728483260906ba044af3c063e309e6259d.cab (source https://www.catalog.update.microsoft.com/Search.aspx?q=qualcomm hs usb 9008 ) and install it manually by right clicking on QHUSB_BULK and selecting "Update driver software" and "Browse my computer for driver software" to where you downloaded CAB file.
MSM tool is stuck on "Param pre-processing"
Ensure you're using the Qualcomm drivers linked above.
MSM tool is stuck on "Sahara communication failed"
Unplug your phone, get in fastboot mode, turn off phone, wait 15 secondes and get back in Qualcomm EDL mode. You can also try using a USB 2.0 port instead of a 3.0 one.
What is SMT Download mode?
Just don't try to unlock that mode, it will wipe your IMEI and your Widevine certificate if you use it.
How can I fix "SMT config not found" error?
Please refer to https://forum.xda-developers.com/showpost.php?p=83448961&postcount=61, all credits to @Shadow12347 for finding it out.
Credits:
@Lord Ace for testing 10.5.2 Indian tool on his device.
OnePlus for the device and OS
Related: [OnePlus Nord][ROM][OTA][Oxygen OS] Repo of Oxygen OS Builds
It worked for me,
After unlocking and locking bootloader and ended with corrupted device on locked bootloader
This method helped to solve it.
Thank You
Big thank you!
Thank you very much, just what I'm looking for
Thanks a lot
Good stuff man. Appreciate it!
Does anyone have a persist.img for Global firmware.
I have a different issue which I'd like to try resolve with persist.img
https://forum.xda-developers.com/oneplus-nord/help/nv-backup-warning-t4148599
Big thanks, fixed my semibricked Nord, time to try an GSI again
Small token for the help: Transaction ID: 5NF52401AU895305W
NisseGurra said:
Small token for the help: Transaction ID: 5NF52401AU895305W
Click to expand...
Click to collapse
Thanks for your donation, appreciate
@ Some_Random_Username
I have a NVBackupUI(thread here) error msg that refuses to go away.
I have used your guide to reflash OOS 10.5.2 but the error message is still there.
Do you by any chance have any idea on a way to resolve this?
norder said:
@ Some_Random_Username
I have a NVBackupUI(thread here) error msg that refuses to go away.
I have used your guide to reflash OOS 10.5.2 but the error message is still there.
Do you by any chance have any idea on a way to resolve this?
Click to expand...
Click to collapse
How you got this error..
And is this affecting your phone functionality?
cultofluna said:
How you got this error..
And is this affecting your phone functionality?
Click to expand...
Click to collapse
This is a brand new set and I first noticed it after I set up my phone. The usual data transfers, reinstalling apps etc. But now, it will not go away. Im thinking it's like that out of the box, just that I did not notice it earlier.
So far I have not had any issues functionality wise and my local OP support tells me to ignore it and a future update will fix it. They're not sure of the cause either and could not fix it.
This message keeps coming back even after multiple factory resets + a ROM reflash. I'm trying to rule out a hardware issue.
I did notice that this app is one of those that you remove when you debloat your OP set. I'm sure it would go away if I did that but if theres an underlying issue I might just be setting myself up for a catastrophic failure in future.
Hi, my friend really messed up with his phone. Phone currently have encrypted data partition. Problem is that msmtool doesn't detect phone at all, also device manager doesn't show it while its in msmtool. Anything he can do?
norder said:
This is a brand new set and I first noticed it after I set up my phone. The usual data transfers, reinstalling apps etc. But now, it will not go away. Im thinking it's like that out of the box, just that I did not notice it earlier.
So far I have not had any issues functionality wise and my local OP support tells me to ignore it and a future update will fix it. They're not sure of the cause either and could not fix it.
This message keeps coming back even after multiple factory resets + a ROM reflash. I'm trying to rule out a hardware issue.
I did notice that this app is one of those that you remove when you debloat your OP set. I'm sure it would go away if I did that but if theres an underlying issue I might just be setting myself up for a catastrophic failure in future.
Click to expand...
Click to collapse
norder said:
@ Some_Random_Username
I have a NVBackupUI(thread here) error msg that refuses to go away.
I have used your guide to reflash OOS 10.5.2 but the error message is still there.
Do you by any chance have any idea on a way to resolve this?
Click to expand...
Click to collapse
Unfortunately no idea, MSM tool in upgrade mode doesn't touch to NV items.
Either wait a new OOS build after 10.5.4 or RMA your device.
skayii said:
Hi, my friend really messed up with his phone. Phone currently have encrypted data partition. Problem is that msmtool doesn't detect phone at all, also device manager doesn't show it while its in msmtool. Anything he can do?
Click to expand...
Click to collapse
Make sure his device is off before trying to get in Qualcomm HS-USB 9008 mode, that was something we ran into during testing.
Also as a sidenote encryption state of the phone doesn't matter to use this tool.
Thanks a lot for the unbrick tool!
Some_Random_Username said:
Unfortunately no idea, MSM tool in upgrade mode doesn't touch to NV items.
Either wait a new OOS build after 10.5.4 or RMA your device.
Click to expand...
Click to collapse
Understood. Thank you
Works great thanks a lot for the links i had to install the driver and your post was well made to avoid me any hassles
By the way, it re-locks the bootloader
@ Some_Random_Username
can you tell me how you got this tool?
i could try getting the tool with oxygen os 10.55
thanks for this.
Hi guys, I did something very stupid, flashed the wrong boot.img and ended up completely bricking my device. I tried changing the active partition to see if it would boot, that didn't help.
I was on the latest august update of official android 11 . Then I found a boot.img I found online, but apparently it wasn't from the exact same rom. The phone booted but no WIFI.
It wouldn't allow me to flash any update through settings - system update hence I decided to try to use a fastboot rom....tried that, but the process when I hit flash_all.bat gives a lot of FAILED (remote: Flashing is not allowed for critical particions) or FAILED (Error reading sparse file)....what am I doing wrong?
I can't do anything except get in fastboot.
Is there any way I can get the phone to work agan? Needless to say that as the idiot I am the whole phone is wiped so this doesn't matter anymore. As long as I can get it to work.
Please advise and thanks (The phone is OP7T Pro ME european).
You can use this tool: https://forum.xda-developers.com/t/...l-to-restore-your-device-to-oxygenos.4002909/
leginhee said:
You can use this tool: https://forum.xda-developers.com/t/...l-to-restore-your-device-to-oxygenos.4002909/
Click to expand...
Click to collapse
Thanks the problem is i can't get it to start qualcomm edl. I power off, press both vol buttons and conmect to usb but nothing happens. What am i doing wrong?
Qualcomm edl Mode is just a blackscreen
"I can't do anything except get in fastboot."
Your Bootloader was unlocked ?
You can try fastboot reboot edl.
Or you can find a ROM that works, extract all images and flash all of them.
I have a similar problem.. kind of. I just flashed a rooted boot to my phone but there is no wifi at all, and since i dont have a SIM card im not getting any updates. the Boot.img came from the oneplus software update and i did the payload dumper. Since I have rooted it ive lost the wifi capabilites. (its the 7T pro me international.)
Hi, Guys. I have the Realme 7 pro. I did install the realme 2.0 ui with A11 in it. OK. everything was ok. Then I went back to the A10 realmeui 1.0 version of the software. The phone hard Bricked. Does not get in to the system. Does not get in to the recovery and the fastboot mode. I dont know what to do anymore.
I can only enter edl mode but I don't have an authorized id
If you could access fastboot mode, you could flash recovery and ROM from it, in case you have the bootloader unlocked. Otherwise you may manage to flash something from EDL mode using QFIL tool - firmware files and XMLs can be extracted from OFP firmware using extractor tool, but I suppose you may need some patched firehose binary file (I tried it with the one extracted from OFP, but it didn't work). Otherwise, you may try sending it to Realme service for reflashing or try to find some chinese/indian guy with credentials for MsmDownloadTool - I saw they charge about 5-20$ for doing that remotely...
qfil doesn't work, I've managed to solve the problem.
LEANDROMENDES said:
qfil doesn't work, I've managed to solve the problem.
Click to expand...
Click to collapse
Good to hear that you managed to solve it. Can you share some details about what you did, so that it can be helpful to somebody who will face the same issue?
I am in a similar situation with the only difference being that fastboot is working for me and i have unlocked bootloader.
i would greatly appreciate it if you told me how you managed to unbrick your device