Related
Hey all,
I have a CWM backup of my current rom and have backups of apps and data but am stuck at a bootloop.
As I have read countless articles, it seems my error is because I have a locked bootloader(not actually sure). Though, I only tried to flash
clockcycle's wiped v20d cwm backup file. It failed part way saying it couldn't write to /system.
Since then, I haven't been able to fully enter CWM. just see the red triangle with the droid guy on his back.
I have read Cmahendra's unbricking guide but it doesn't work as I have installed JB and even the tips to unplug, wait 10s and reopen the program to flash again it still won't work. Still stops at 15% saying error connecting to the phone.
There is a similar thread which had this exact problem which said to
use the online method to recover your phone since I had already installed JB. I edited the hosts file to remove the fake offline server and opened up the b2CAppsetup.exe, clicked on customer support,
entered my model LGP769BK and my S/N and it began to start the process and 'analyze' then crashed and said "updating is not possible any longer due to a fatal error while the LG mobile phone software Update"
I've tried to search this out myself and not waste any space but I'm at loss here. If anyone has any help, it would be much appreciated
as I don't have a phone while this is not working.
I've tried all the ways to to hard reset, master reset and still I get the droid guy on his back. I can get to S/w mode like all the other posts say to do but none of those fixes seem to work for me. Am I missing something?
Do I have any options here? I have kind of read that I should just unlock the bootloader but I don't think that applies in my case as I can't turn on my phone fully.
edit: for the online method(LG support tool), it basically cancels when it goes to the 'downloading' phase --> this is what I've seen as most of the answers but doesn't work
Upon further reading,
many seemed to need to replace their u-boot and x-loader
I did so and installed fastboot using Lelus' script here:
http://forum.xda-developers.com/showpost.php?p=41768774&postcount=1
I used option 6 which allowed me to flash the u-boot and x-loader from p760(works with my 769 and others as it says in the options) for JB
I'm not sure if I needed this as I don't have an unlocked bootloader.
I'm not sure of commands in fastboot but I ran
fastboot devices and it showed something
I also ran: fastboot flash recovery recovery.img
and I put one of my cwm backups in the "yours" folder
After I activate fastboot, it brings me to the C:\fastboot\yours folder
I assume this is for me to put my intended files in but I'm unsure if I should use my cwm backup or something else?
After it flashed the recovery img, I sent a fastboot reboot command
but it still went back to the droid lying down with a red triangle.
As some of you may see, I'm not too great with this but I feel like I'm close. Does anybody have an idea of what I should be doing?
should I flash an update.zip?
I don't know many commands but hopefully this gets me going in the right direction.
PLEASE HELP ME!!!!
I guess your cmw restore formatted your system but couldnt load the new system
the recovery you run with a locked bootloader uses a technique called 2nd init which i think is somewhere stored in the system partition. so when the recovery formatted the system, it lost itself too.
I've had a similar problem. the way out would be booting into the SW upgrade mode--switch off the device, remove the battery, remove the usb cable. press the volume up button and connect the phone to the computer. wait for a couple of seconds and then insert the battery.
you should be in the SW upgrade mode
now use the B2C client. if it gives an option to upgrade, use that otherwise, go to the customer support menu and press recovery phone
I have already done earlier. It may have gotten lost in my frenzy of information. I have put the phone into software mode, as you said, and it won't work either; There's no option to click upgrade because it's JB(V20D) and when I click recovery phone and enter my imei, LG mobile support tool(B2capp.exe) analyzes and then has a 'fatal error'
Since I flashed the new u-boot and x-loader my screens are all backwards/mirrored. Maybe the tool flashed an unlocked u-boot and x-loader if that's possible.
Is a recovery possible by fastboot?
I have a clean and full copy of my cwm recovery as well as apps and data backed up, I just need to get this phone in working order
shockah486 said:
I have already done earlier. It may have gotten lost in my frenzy of information. I have put the phone into software mode, as you said, and it won't work either; There's no option to click upgrade because it's JB(V20D) and when I click recovery phone and enter my imei, LG mobile support tool(B2capp.exe) analyzes and then has a 'fatal error'
Since I flashed the new u-boot and x-loader my screens are all backwards/mirrored. Maybe the tool flashed an unlocked u-boot and x-loader if that's possible.
Is a recovery possible by fastboot?
I have a clean and full copy of my cwm recovery as well as apps and data backed up, I just need to get this phone in working order
Click to expand...
Click to collapse
If you fastboot flash the u-boot and x-loader from p769(ICS) it should go thru with the offline flash detailed in cmahendras guide.
http://forum.xda-developers.com/showthread.php?t=2085344
Use the KDZ_FW_UPD.zip from this thread
Or try this
Remove all of the stuff you have downloaded for this. Download the original B2C client from LG's site and use that
Tablechair said:
If you fastboot flash the u-boot and x-loader from p769(ICS) it should go thru with the offline flash detailed in cmahendras guide.
Click to expand...
Click to collapse
Thanks.I'll try this. if I have the ICS bootloader, does that mean I'll have to flash the V10G kdz? or can i do the v20d kdz
dhruvbatra205 said:
http://forum.xda-developers.com/showthread.php?t=2085344
Use the KDZ_FW_UPD.zip from this thread
Or try this
Remove all of the stuff you have downloaded for this. Download the original B2C client from LG's site and use that
Click to expand...
Click to collapse
I have the updated kdz fw upd .zip from the unbrick and root thread as well as downloaded a new, official B2C client but they all still hang at the download part during phone recovery.
Tablechair, that did the trick.
Is this because the tool we use to flash for the offline method doesn't recognize the x and u-boot loaderse of JB?
After I installed the ICS boot loaders, my software upgrade mode wasn't mirrored anymore.
I did as tablechair and flashed the V20D.
Does anyone understand why this problem happened in the firstplace? Maybe I didn't get a full copy of clockcycle's backup cwm
or should I have not flashed his recovery in the first place since I didn't have an unlocked bootloader?
Again thank you for all your help and if anyone can provide answers to my other supplemental questions, that'd be great.
Off to root and probably unlock bootloader to be sure.
edit: I can't find the thanks button. but thank you very much tablechair. much appreciated. Hope this can help someone else
p.s. also big thanks to those who made the fastboot program for p769(Artas182x and sguerrini97). really an invaluable tool as I now know.
shockah486 said:
Tablechair, that did the trick.
Is this because the tool we use to flash for the offline method doesn't recognize the x and u-boot loaderse of JB?
After I installed the ICS boot loaders, my software upgrade mode wasn't mirrored anymore.
I did as tablechair and flashed the V20D.
Does anyone understand why this problem happened in the firstplace? Maybe I didn't get a full copy of clockcycle's backup cwm
or should I have not flashed his recovery in the first place since I didn't have an unlocked bootloader?
Again thank you for all your help and if anyone can provide answers to my other supplemental questions, that'd be great.
Off to root and probably unlock bootloader to be sure.
edit: I can't find the thanks button. but thank you very much tablechair. much appreciated. Hope this can help someone else
p.s. also big thanks to those who made the fastboot program for p769(Artas182x and sguerrini97). really an invaluable tool as I now know.
Click to expand...
Click to collapse
Things don't always go according to plan, maybe his Clockworkmod backup was made from the touch version and he didn't have artas182x second init recovery installed. So when the cwm failed the first time, did you try to restore your cwm backup?
kuma82 said:
Things don't always go according to plan, maybe his Clockworkmod backup was made from the touch version and he didn't have artas182x second init recovery installed. So when the cwm failed the first time, did you try to restore your cwm backup?
Click to expand...
Click to collapse
Not yet. having problems flashing a kdz again. I've tried the 2 different software modes, as well as setting emerg and diag but still getting stuck at 15% again.
Do i have to replace my uboot and xloader with the ICS ones every time I want to use the offline flash method?
edit: yup, after replacing with ICS loaders again i'm able to flash using software upgrade. will update on whether I can restore cwm
kuma82 said:
Things don't always go according to plan, maybe his Clockworkmod backup was made from the touch version and he didn't have artas182x second init recovery installed. So when the cwm failed the first time, did you try to restore your cwm backup?
Click to expand...
Click to collapse
I realized I misread your question. When I flashed before the incident, it failed to write to system and I didn't restore my other folder. I rebooted and it was all missed up. Anyway, now that I've got everything back and now with an unlocked bootloader, i was able to recover my old image. However, data isn't working so I have to find the radio to flash as I recall reading in other threads.
Can someone explain in laymen terms why this is? recap, i was on unlocked bl rooted jb and I flashed my old cwm backup when I was rooted but had a locked bl. My apps and messages were all there but the radio was different. I'd understand if I was going from ICS to JB but I was on JB both times. The only difference being a locked BL. It's got to be something about the Radio from p760 or V20B that didn't work on my earlier backup or something like that because the layout status bar is different with a "data" button and showing H instead of 4g(which are the same afaik).
Since, I restored to my backup from after my bootloader unlock and root so data is working showing 'H' with the different layout
Also, I had problems backing up and restoring until I noticed that it works better when I power off the phone and do the manual commands to enter recovery as opposed to using the app to send me to recovery(where I incurred /system backup errors).
My last question is which cwm recovery should I use? I currently have the one for a locked bootloader installed as per Artas182x's website. On that post he has a link for an unlocked bootloader recovery on the xda forums but that thread was updated to not working. Are there any disadvantages to me using a locked bootloader cwm recovery?
I don't think I have any option but to try it as I want to flash CM10.1 for p769. I also read that if your bootloader is unlocked, you can download the cwm from the googleplay. If this is true, can I just install over or should I uninstall the Artas182x locked bootloader one????
update: have to remove l9 recovery by deleting the appropriate system folders and then flash the appropriate .img through adb commands
Help.
shockah486 said:
I realized I misread your question. When I flashed before the incident, it failed to write to system and I didn't restore my other folder. I rebooted and it was all missed up. Anyway, now that I've got everything back and now with an unlocked bootloader, i was able to recover my old image. However, data isn't working so I have to find the radio to flash as I recall reading in other threads.
Can someone explain in laymen terms why this is? recap, i was on unlocked bl rooted jb and I flashed my old cwm backup when I was rooted but had a locked bl. My apps and messages were all there but the radio was different. I'd understand if I was going from ICS to JB but I was on JB both times. The only difference being a locked BL. It's got to be something about the Radio from p760 or V20B that didn't work on my earlier backup or something like that because the layout status bar is different with a "data" button and showing H instead of 4g(which are the same afaik).
Since, I restored to my backup from after my bootloader unlock and root so data is working showing 'H' with the different layout
Also, I had problems backing up and restoring until I noticed that it works better when I power off the phone and do the manual commands to enter recovery as opposed to using the app to send me to recovery(where I incurred /system backup errors).
My last question is which cwm recovery should I use? I currently have the one for a locked bootloader installed as per Artas182x's website. On that post he has a link for an unlocked bootloader recovery on the xda forums but that thread was updated to not working. Are there any disadvantages to me using a locked bootloader cwm recovery?
I don't think I have any option but to try it as I want to flash CM10.1 for p769. I also read that if your bootloader is unlocked, you can download the cwm from the googleplay. If this is true, can I just install over or should I uninstall the Artas182x locked bootloader one????
update: have to remove l9 recovery by deleting the appropriate system folders and then flash the appropriate .img through adb commands
Click to expand...
Click to collapse
Although I might be late, I have the same problem and the same phone and I really need help. I have a soft bricked phone lg optimus l9 and I had the same problems that you had exactly... Which is weird exept I don't have Clock Work Mod or anything ... If you get this I would really appreciate some help. Thanks
yup me too
I finally got software upgrade to work with my lg p769 that was security error cuz i still haven't unlocked the bootloader, if i knew what a good job lg and T-Mobile did in locking it i would have waited and got a g3 that my buddy rooted in like 5 min and unlocked the boot....
What worked for me is this LG FLASH TOOL 2014 THREAD ON XDA
http://forum.xda-developers.com/showthread.php?t=2797190
flashed both the 20H and 20D successfully i uninstalled everything lg in the control panel first though.
Hope this works for you cuz i was struggling on and off for a month to get this far lol
the 2014 tool ultimately worked for me too, once I fixed a couple things. I had rooted and forgotten to unlock, so it was at Security Error, and it would also disconnect at 15% .. in the 2014 tool, I had to install all the updates even though I'm in windows 7 or it would keep doing it. All good now.
I have been trying all these methods and I am still not able to get in the S/W upgrade mode. The only thing I am getting from the device is being able to put it fastboot mode (The inverted one). I really want to revive this phone
Thanks in advance for any help given
Liger878 said:
I have been trying all these methods and I am still not able to get in the S/W upgrade mode. The only thing I am getting from the device is being able to put it fastboot mode (The inverted one). I really want to revive this phone
Thanks in advance for any help given
Click to expand...
Click to collapse
Hey, it's been ages since I have done any of this but IIRC, if you can get into fastbood mode u can still get into software mode,
- turn phone into fastboot mode
- open the software upgrader thing as you normally do
- maybe switch emerg to diag or something like that
- this part is where it's slightly different than the normal way(same program but u select a different option than the default 1st option on
I think if yoiu look through the tutorials it does mention an alternative method for getting into software mode
in one instance in my past, i had to reflash the ICS boot drivers so the software installer would recognize that
the flashing of the ICS boot drivers is done through fastboot. Should be a post in my history where I asked a question regarding this.
Sorry for the chaos but maybe this will help you get in the right direction since I don't know any of your phone history and what you've done etc
best of luck mate
shockah486 said:
Hey, it's been ages since I have done any of this but IIRC, if you can get into fastbood mode u can still get into software mode,
- turn phone into fastboot mode
- open the software upgrader thing as you normally do
- maybe switch emerg to diag or something like that
- this part is where it's slightly different than the normal way(same program but u select a different option than the default 1st option on
I think if yoiu look through the tutorials it does mention an alternative method for getting into software mode
in one instance in my past, i had to reflash the ICS boot drivers so the software installer would recognize that
the flashing of the ICS boot drivers is done through fastboot. Should be a post in my history where I asked a question regarding this.
Sorry for the chaos but maybe this will help you get in the right direction since I don't know any of your phone history and what you've done etc
best of luck mate
Click to expand...
Click to collapse
Thanks, Never tried switching to DIAG before but I will try it and let you know what is the outcome.
Hopefully you find the thread that states the exact steps bc that is off the top of my head and over a year ago by memory . GL bud
Liger878 said:
Thanks, Never tried switching to DIAG before but I will try it and let you know what is the outcome.
Click to expand...
Click to collapse
Hey, I have been trying it with the fastboot but it keeps timing out and not allowing me to finish. One thing I should let you know is that, ever since I had put the device in fastboot, I am not able to get back the S/W upgrade mode. Dont know if that will help in seeing what my problem is or if you want me to explain everything from the beginning again, I am more than happy to.
Have you followed the steps that I linked to in the first 3 posts of this thread?
Follow the steps to flash the ICS bootloaders in fastboot and then you can do the fastboot trick for getting the software to recognize your device.
Right now your phone has the JB boot loader on it and is thus not recognized by the software.
recap:
step 1: flash the ICS bootloaders in fastboot (look at the linked thread in post 2)
step 2: use the software in emerg or diag mode but sitll follow the same steps as the tutorial. I think my earlier posts should explain precisely.
if you dont flash the ICS bootloaders, it won't be recognized by the KDZ installer
Hey guys! Unfortunately I bricked my new HTC Desire 626s while fiddling around with xposed for lollipop after successfully rooting the phone and installing cyanogen recovery. I think if I flash the stock rom on the phone through either adb or cyanogen recovery I can unbrick it, but I have been unsuccessful in finding this file on the internet. Would anyone care to give me a link or upload the stock firmware/rom of this phone? It would really help me out, thank you!
You have to make sure the firmware is the same version or newer than the one currently on the phone as well as which carrier or region the phone is from. Without that, can't provide the correct file to download.
es0tericcha0s said:
You have to make sure the firmware is the same version or newer than the one currently on the phone as well as which carrier or region the phone is from. Without that, can't provide the correct file to download.
Click to expand...
Click to collapse
Umm.. Okay so I guess I'll give you my phone's info? WAIT DOES THIS MEAN YOU CAN PROVIDE A DOWNLOAD!? IM SO EXCITED, UH OK HERE
- HTC Desire 626s
- Metro PCS USA
- Current firmware version : 1.06.1550.7
ANYTHING ELSE?? IF YOU CAN GIVE ME THAT DOWNLOAD LINK, MY MOM WONT KILL ME:crying::crying::crying: (she's really pissed :laugh Thank you btw!
Was just thinking about this...if you soft bricked after attempting to install Xposed, and nothing else, you should be able to get out of it by flashing the xposed uninstaller zip. If that does not work, stay tuned to this thread http://forum.xda-developers.com/desire-626/help/htc-desire-626s-root-recovery-t3169169 as there are some others at the end of the thread in a similar predicament. It does not appear that there is an official RUU yet for the Metro version, only the T-Mobile version, and they are not compatible. Just try the uninstaller zip first because that would be the easiest thing to try and should only take a couple of minutes.
es0tericcha0s said:
Was just thinking about this...if you soft bricked after attempting to install Xposed, and nothing else, you should be able to get out of it by flashing the xposed uninstaller zip. If that does not work, stay tuned to this thread http://forum.xda-developers.com/desire-626/help/htc-desire-626s-root-recovery-t3169169 as there are some others at the end of the thread in a similar predicament. It does not appear that there is an official RUU yet for the Metro version, only the T-Mobile version, and they are not compatible. Just try the uninstaller zip first because that would be the easiest thing to try and should only take a couple of minutes.
Click to expand...
Click to collapse
I tried this before my phone got ****ed and it worked:good:! If you can help me dude that'd be great. After uninstalling or changing some stuff in priv-app on my HTC Desire 626s, when I rebooted, it would just stay in a boot loop with the optimizing app message. Any ideas?
What did you uninstall? I would ask for those apps in that thread and use a flashable zip and install via TWRP. You might also try clearing caches and/or resetting the phone again. It DOES take a long time to optimize the apps after wiping stuff as well, so sometimes it is a matter of being patient.
This is why I ALWAYS recommend to freeze apps vs uninstalling. Uninstalling them does not get you any usable space back, so there is no benefit, but it can cause issues if you do need the apps, as you can see...
es0tericcha0s said:
What did you uninstall? I would ask for those apps in that thread and use a flashable zip and install via TWRP. You might also try clearing caches and/or resetting the phone again. It DOES take a long time to optimize the apps after wiping stuff as well, so sometimes it is a matter of being patient.
This is why I ALWAYS recommend to freeze apps vs uninstalling. Uninstalling them does not get you any usable space back, so there is no benefit, but it can cause issues if you do need the apps, as you can see...
Click to expand...
Click to collapse
I believe I uninstalled the dialer and its service in an attempt to replace them with the stock lollipop ones. How do you install TWRP on this phone? My mom has the same phone and its also rooted but hers actually works so I was thinking since TWRP has a nandroid backup setting, I could simply do a nandroid backup on hers and flash it on to mine to see if it will boot up. What do you think? And for the optimizing apps thing, it would finish optimizing, say starting apps, reboot and then optimize again and repeat. Thanks for the help btw, I really hope we can fix this.
You have to unlock the bootloader @ htcdev.com and use fastboot to install TWRP. And yes, that would work, as long as they are on the same software update. Know that when you unlock the bootloader, it will automatically wipe the phone, so make sure she has everything backed up to Google, the PC, etc.
es0tericcha0s said:
You have to unlock the bootloader @ htcdev.com and use fastboot to install TWRP. And yes, that would work, as long as they are on the same software update. Know that when you unlock the bootloader, it will automatically wipe the phone, so make sure she has everything backed up to Google, the PC, etc.
Click to expand...
Click to collapse
Do you have the TWRP recovery file for me to download?
I'm afraid I'm a bit confused... How did you install Xposed and the Uninstaller without a custom recovery? Upon further searching, there doesn't appear to be a version of TWRP for your phone that I could find. Just figured you already had one. You must be on Kit Kat and not Lollipop?
es0tericcha0s said:
I'm afraid I'm a bit confused... How did you install Xposed and the Uninstaller without a custom recovery? Upon further searching, there doesn't appear to be a version of TWRP for your phone that I could find. Just figured you already had one. You must be on Kit Kat and not Lollipop?
Click to expand...
Click to collapse
I installed Cyanogen recovery before flashing Xposed and the uninstaller. I thought you had the TWRP recovery img for my phone which is why I asked. I believe some developers are working on a Clockworkmod recovery for this phone which is basically the same thing as TWRP recovery, right? Anyways I guess I just have to wait until that comes out, but I was wondering if anyone who somehow got a hold of the stock rom could upload it for us to use. It would be really helpful
ClockWorkMod is the recovery that Cyanogen uses. That is able to perform nandroid backups as well.
You have to unlock the bootloader, then if you messed up your stock rom and you've updated it to something newer than what Samsung gives for a stock recoverable rom, you must first use the tmobile vers, let it fail, and then use metropcs vers.
If you messed up recovery or anything it will all go back to stock after flash.
Next just copy superuser zip file to phone, go to download mode and adb flash cyanogen recovery img. Then reboot to recovery, choose to flash update, and find the superuser. zip and flash it, voila.
https://www.mediafire.com/?8o6qtn7hlsec0zj,yqbbzb7divlcvvc
Kitkat, anyone?
Does anybody have a stock KitKat ROM for this device? I'd like to try to bypass the FRP, but am stuck on what must be either a marshmallow or lollipop ROM.
What carrier do you have?
I can send you a backup of the FRP.img for Marshmallow or for lollipop.
You can dd if= flash it to your device and you should be all good.
I am looking for any older roms for these devices too.
Seems like not too many people save the RUU and then HTC only releases the newest.
I got lollipop and marshmallow that's it.
But like i said we can fix the frp partition.
Issue is fixed
BigCountry907 said:
What carrier do you have?
I can send you a backup of the FRP.img for Marshmallow or for lollipop.
You can dd if= flash it to your device and you should be all good.
I am looking for any older roms for these devices too.
Seems like not too many people save the RUU and then HTC only releases the newest.
I got lollipop and marshmallow that's it.
But like i said we can fix the frp partition.
Click to expand...
Click to collapse
I ended up fixing it using some ADB commands as noted in the "Well, I may have found..." thread. It'll be nice to have this phone out of my life. The day I had to spend with it was two days too many.
Something really weird happened while I was installing roms. Someone how my OEM got locked and I flashed and voila stuck on the oneplus logo. I have my fastboot working properly also got twrp installed. The thing is that my bootloader is locked so i cant flash and I cant unlock bootloader because I cant flash and set oem unlock. I know this is ****ed up and also my volume up key is not working so we have to work without that. . Whenevr i turn on the device the powered by android quickly disappears and i am in the fastboot. If I do oem unlock it sends me to the recovery. I am not sure why i can't OEM unlock in fastboot. I don't care about data and stuff. Just want the phone working. The unbrick guide wants me to press the volume up key to get to the qualcomm flashing. Unfortunately i can't do that. Need of dire help please ;_;
I kind of have the same problem as of 2 days (see https://forum.xda-developers.com/android/help/bricked-oneplus-x-unlock-bootloader-t3816387), which is kind of strange, as I haven't read anywhere else about it on the internet.
I'll be following this topic.
Japeroen said:
I kind of have the same problem as of 2 days (see https://forum.xda-developers.com/android/help/bricked-oneplus-x-unlock-bootloader-t3816387), which is kind of strange, as I haven't read anywhere else about it on the internet.
I'll be following this topic.
Click to expand...
Click to collapse
I've solved it bud. IF you have a working recovery and bootloader. Flash the stock OS. It'll flash even though the bootloader is locked and then your can oem unlock and do whatever.
KenSha105 said:
I've solved it bud. IF you have a working recovery and bootloader. Flash the stock OS. It'll flash even though the bootloader is locked and then your can oem unlock and do whatever.
Click to expand...
Click to collapse
That's good news! But I think I've tried that, but had no succes. Can you link me the ROM you've flashed?
Japeroen said:
That's good news! But I think I've tried that, but had no succes. Can you link me the ROM you've flashed?
Click to expand...
Click to collapse
https://downloads.oneplus.com/oneplus-x/oneplus_x_oxygenos_3.1.4/
There.
KenSha105 said:
https://downloads.oneplus.com/oneplus-x/oneplus_x_oxygenos_3.1.4/
There.
Click to expand...
Click to collapse
Thank you. I've tried it, but the problem is that I'm stuck with the Oneplus recovery, as I've mentioned in my post. From there, I have 2 options to flash:
1) from internal memory. When I click this, nothing happens (no new screen or anything, nothing)
2) from USB (adb sideload). When I try to sideload the ROM using this option, it starts promising, but after a few seconds, it just says 'Installation failed' without any reason why. Just like for all other ROMS.
So... No progress here. I've also tried to flash the stock recovery (even though it should be on my phone already, maybe another version) using fastboot, but my OPX won't take it because the bootloader is still locked.
Last resort: I'll try the Oneplus live chat tomorrow, but I do not expect any useful information from that...
Japeroen said:
Thank you. I've tried it, but the problem is that I'm stuck with the Oneplus recovery, as I've mentioned in my post. From there, I have 2 options to flash:
1) from internal memory. When I click this, nothing happens (no new screen or anything, nothing)
2) from USB (adb sideload). When I try to sideload the ROM using this option, it starts promising, but after a few seconds, it just says 'Installation failed' without any reason why. Just like for all other ROMS.
So... No progress here. I've also tried to flash the stock recovery (even though it should be on my phone already, maybe another version) using fastboot, but my OPX won't take it because the bootloader is still locked.
Last resort: I'll try the Oneplus live chat tomorrow, but I do not expect any useful information from that...
Click to expand...
Click to collapse
Well guess what, they could solve it.
Or at least partly. It appears that Oneplus has an updated version of the tool used in the mega unbrick guide: MSMDownloadTool V2.1 instead of V2.0. This tool did it's job perfectly, OOS was also installed, in contrast to V2.0 of the tool. I ****ed it up again after that (oops), but found the tool V2.1 online here (https://github.com/finlayacourt/Oneplus-X-Recovery). Some files are missing here like the system.img, but I just copied them from the folder of tool V2.0 found in the mega unbrick guide. It didn't work as perfectly as Oneplus's tool, but at least I was able to install OOS from the Oneplus bootloader, which I wasn't able to before. So knowing that, in the end, the result is the same as for their tool. A working OS again, perfect! So now I can unlock the bootloader again and continue the adventure.
Now, what I've found is that the mainboard I have on my OPX is a newer version (if you search on Google for 'oneplus E1003_15', you'll find some things about it, not much though). I'm 99% positive that this caused all the problems I've encountered. It is why TWRP couldn't see any storage, why the stock Oneplus recovery couldn't see any storage, why the tool V2.0 didn't work and why V2.1 did work. If I wanted a working TWRP, I had to install a modified version of TWRP which is compatible with the newer version, from here: https://www.android-hilfe.de/forum/...-1-oreo-rom-unofficial-onyx-8-1-x.867374.html (yes, once you're relying on German sites, you know you went very deep). After that, I could install LineageOS 14.1 again. I was unable to install the unofficial LineageOS 15.1 however, but knowing where I came from, what I've gone through and how much time I've lost on all of this, I think I'll just stick with LineageOS 14.1 until this baby can retire...
Got to say I only have very positive experiences with Oneplus and it's customer support, and this only adds to it!
After many searches for the best help on my new Asus ZenFone V V520KL, I have no way to unlock the bootloader. Asus doesn't provide any support for this 2017 model, nor does Verizon, the company the phone was made for.
It comes stock with Nougat 7.0 OS, 32 GB ROM & 4 GB RAM. It's got a decent size screen and runs not too too bad.
I'm wondering if one of the tech people here would be so kind as to help me with not only unlocking the bootloader so I can then install a custom recovery image, preferrably TWRP, since I have used this type of program before on my other ZenFone 3 Zoom.
I already have ADB tools on my Windows 7 notebook (32-bit). I used it to install the last root on my other aforementioned phone so it will work.
What I'm wondering about is the bootloader unlock tool, custom recovery image (TWRP), and a way to root the bastard. Hopefully we can relock the bootloader after the job's done because it's annoying on my other phone to always have to bypass the "Can't check for corruption." screen before the phone actually boots. Again this is for the Asus ZenFone V V520KL model. There is really no information anywhere right now I know of that gets this job done.
Having a custom Pie 9.0 ROM upgrade would be the best if possible once we root the device.
My name is Andrew, S.D. from Canada.
Thanks and blessings.
Root
Did you find a way to root it?
No, I still need help with the original post. I can root the ZenFone 3 Zoom ZE553KL but they already tell us how to do that in another forum.
the Bootloader for v520kl is already unlock by ENG Firmware
Just serch it in forums
You're talking to a noob. Give me the location of ENG firmware.
Hi friend, in the other post de link for downloading de ENG Firmware is broken
[email protected] said:
Hi friend, in the other post de link for downloading de ENG Firmware is broken
Click to expand...
Click to collapse
This is the link
http://www.mediafire.com/file/lc17b75qbvy018z/Asus_Zenfone_V_V520KL_All_WW_ENG_T3.3.15.zip
I tried to flash it did not work for me..
---------- Post added at 10:55 PM ---------- Previous post was at 10:43 PM ----------
Doctor Andrew said:
You're talking to a noob. Give me the location of ENG firmware.
Click to expand...
Click to collapse
Here is the link:
https://forum.xda-developers.com/showpost.php?p=78833735&postcount=52
Hi friend,
It's de the same rom for this page
https:
www
hardreset.info/devices/asus/asus-v520kl/faq/firmware/ because, the size of this rom is 813MB
and the size of the rom of the link that you provide is 775.53 MB and the files is the same name.
or this rom has been updated.
someone know what version of android have this rom
Okay so we now have a link to just the ROM it looks like. Do we have a way to unlock the bootloader yet and install TWRP first? What about the TWRP image file, do we have one of those as well?
Doctor Andrew said:
Okay so we now have a link to just the ROM it looks like. Do we have a way to unlock the bootloader yet and install TWRP first? What about the TWRP image file, do we have one of those as well?
Click to expand...
Click to collapse
To flash the ENG rom, you do not need to unlock the bootloader. Just the Asus flash tool.
Once you flash it, you can reboot to fastboot mode(adb reboot bootloader) and use fastboot oem unlock to unlock bootloader. Be warned though the ENG firmware is very basic. No web browser, no google play, you can't pull down the notification bar etc. (Great battery life though with about 7-10 days since I am not using it at all).
As of right now, there is no TWRP for it that i know of. In fact, I can't even boot into recovery atm. I also am unable to get boot.img file form the .raw file so the various methods to root it seem to be out of reach for the moment.
I've absolutely no interest in the ENG firmware. Still looking for a solution to the original post that people can understand and use easily.
Doctor Andrew said:
I've absolutely no interest in the ENG firmware. Still looking for a solution to the original post that people can understand and use easily.
Click to expand...
Click to collapse
Well, ENG is the only way i could figure it out but I finally manged to get root on the phone with magisk. Still have some work to do to get play store and everything else running properly, but for now, hardest part is done.
oh my god - rooooot
faericia said:
Well, ENG is the only way i could figure it out but I finally manged to get root on the phone with magisk. Still have some work to do to get play store and everything else running properly, but for now, hardest part is done.
Click to expand...
Click to collapse
Good time of day, Faericia, this is just great news. You can share the experience of getting root with magisk?
Regarding Google Play and all that, where you need Google, using a bunch of microG and Aurora store.
MicroG is the core of Google services, which allows you to pass authorization through Google, synchronize and do it all without any garbage code, according to my observations, the expense is not much spent.
Aurora shop, as an analogue of Google Play, the application, the ability to save apk.
Due to the lack of binding to your Google account.
I think this connection may be relevant and rooted.
The initial partition should appear as root, it intends to resolve all the problems that I have in my phone. for asus applications, after I have done my best, several attempts have already been made.
It was possible to look in read mode using root explorer.
Perhaps you can somehow remove the protection of verizon on the bootloader.
PS the most hardcore variation of raw firmware, a hex editor, search in that between code, boot, recovery, system, etc. Very large empty spaces. previously there were 100 miles earlier.
I think this is part of verizon jokes.
This article should be cut and placed in img.
Thanks so much in advance.
hello when you finish you could share through a tutorial what you did I have my asus v with verizon rom and only data but if I can make it functional with the rom eng then better
Okay, Here are the steps. Before anything else though, I should warn you that I have not been able to get safetynet to pass. So if you have apps that require safetynet to pass, this may not be the way to go.
First you will need the ENG firmware:
https://mega.nz/#!l7wBlQ4B!uB63yH5Rir24GaSfDMWKowqdz-N_sc6SJ-q1WuuGiqM/
Also Asus Flash tools v 1.0.0.72:
https://drive.google.com/file/d/11rcjOgdpJhpK97GzbhYK6cYEIWOtzKE9/view
I am assuming you know adb and such. If not, search the forums and get the adb tools.
Using adb, Reboot to bootloader. ( adb reboot bootloader )
Load the .raw file in the asus flash tool, select v520KL and flash.
Once flash is done, unlock bootloader by going into bootloader (adb reboot bootloader) then type (fastboot oem unlock.)
Here is the patched_boot.img I used if you want to just try to flash that and see if it will work. This is for the eng firmware.
https://drive.google.com/file/d/1fUxGc27lrodR3ro9MIspde73G8Xg9VlW/view?usp=sharing
Go into bootloader and flash. (fastboot flash boot patched_boot.img)
Install magisk manager and test it out.
If you wish to patch the img yourself, the steps are below (still working on it):
So now we have the phone unlocked, and the software is very basic. We also need the boot.img file to patch since we do not have TWRP. Since I couldn't get it from the raw file (the extracted file is invalid with a size of 0 bytes) I decided to extract it from the phone. But to extract from the phone we need root. So for this next step, temporary root will have to do.
You can get temp root by using KingoRoot. Use the PC version and you will get root. This is just so we can extract the files from the phone itself.
I need to find the steps for the next steps again, but the basics is, extract boot.img from the phone. Patch it using magisk manager and then flash the patched_boot.img in bootloader mode. I had google play working(chinese version) but once i removed kingoroot it kept crashing. I currently have magisk and it gives me the root permissions but safetynet fails. I will retry this tomorrow and see if I can fix the safetynet issue and update this post with the steps.
Also I seem to have borken recovery mode on my phone. That may be because I tried flashing bunch of other stuff before I managed to root it so I do not know if it will be the same situation to you or not. I believe after I flashed ENG firmware, i had access to recovery mode at one point, but I may have just messed it up. Either way, Expect updates in the near future.
asus recovery
A huge over many thanks.
I also tried to get a temporary root, via the kingoroot pc version, it did not work, I suspect it because I installed eng, but did not oem unloock, when I did unlock, I somehow managed to get the boot out of the firmware, the user from 4pda was patched, but said that this boot is from 8 android, I thought that I had schizophrenia because later on trying to get boot I also got 0mb, this was due to the unexpected end of the archive.
In general, by flashing this boot, I also found a recovery mode and even a recovery mode, but going into recovery a message from Verizon was displayed, standard, when you roll the eng firmware for 5 seconds, hold something, etc. Well, you understand. And the whole laugh is that it was in a circle.
I suspect that asus had any plans for this device or for this amount of components. In other words, it was some kind of blank that was abandoned, maybe asus thought that this exclusive for verizon will make a trap, and then they say on the basis of v520kl we will make a non-exclusive open device, but alas, a huge member between two rolls.
Therefore, fortunately or unfortunately, recovery was not broken by you, most likely it was not working initially, but this is only a guess.
Daniel.Sim said:
A huge over many thanks.
I also tried to get a temporary root, via the kingoroot pc version, it did not work, I suspect it because I installed eng, but did not oem unloock, when I did unlock, I somehow managed to get the boot out of the firmware, the user from 4pda was patched, but said that this boot is from 8 android, I thought that I had schizophrenia because later on trying to get boot I also got 0mb, this was due to the unexpected end of the archive.
In general, by flashing this boot, I also found a recovery mode and even a recovery mode, but going into recovery a message from Verizon was displayed, standard, when you roll the eng firmware for 5 seconds, hold something, etc. Well, you understand. And the whole laugh is that it was in a circle.
I suspect that asus had any plans for this device or for this amount of components. In other words, it was some kind of blank that was abandoned, maybe asus thought that this exclusive for verizon will make a trap, and then they say on the basis of v520kl we will make a non-exclusive open device, but alas, a huge member between two rolls.
Therefore, fortunately or unfortunately, recovery was not broken by you, most likely it was not working initially, but this is only a guess.
Click to expand...
Click to collapse
I know recovery mode was working with VZW firmware. I know this because I tried installing using adb sideload several times. I might be mistaken on getting there once i flashed eng firmware but again, it has been a month or two since I tried it and all I know is, it won't go into the recovery screen now. Oh well, not my main phone so irrelevant.
I have installed patched boot img with fastboot. Now have root. But there a lot of apps not working. No Google apps at all. And no way to install them.
---------- Post added at 06:23 PM ---------- Previous post was at 06:15 PM ----------
Have installed patched boot img by faericia. Now I got root. But eng version doesn't have Google apps, so no play store, no Google pay, no accounts, no Gmail. And I don't know how to install it.
game #1 said:
I have installed patched boot img with fastboot. Now have root. But there a lot of apps not working. No Google apps at all. And no way to install them.
---------- Post added at 06:23 PM ---------- Previous post was at 06:15 PM ----------
Have installed patched boot img by faericia. Now I got root. But eng version doesn't have Google apps, so no play store, no Google pay, no accounts, no Gmail. And I don't know how to install it.
Click to expand...
Click to collapse
The only time I had Google apps was when I had kingoroot root still int he system. I then downloaded the Chinese google apps installer and used that to get it. Once i removed kingoroot google framwork kept crashing making it unusable.. If you don't need to pass safetynet, that might be the way. Othewise, I am still trying to work on it.
faericia said:
The only time I had Google apps was when I had kingoroot root still int he system. I then downloaded the Chinese google apps installer and used that to get it. Once i removed kingoroot google framwork kept crashing making it unusable.. If you don't need to pass safetynet, that might be the way. Othewise, I am still trying to work on it.
Click to expand...
Click to collapse
I found out how to stop frameworks from crashing. Just make it a system app. I use link2sd for this.
Now all gapps work nice.
I'd like to keep this simple. I tried rooting and not a single tutorial on here has ended with root privileges for various reasons. I'm done with it. I flashed stock firmware in hopes of removing any trace of files that may have been altered during the various root tutorials I followed, but Samsung Pass says the device is still rooted.
What do I need to do to return to 100% stock?
noxarcana said:
I'd like to keep this simple. I tried rooting and not a single tutorial on here has ended with root privileges for various reasons. I'm done with it. I flashed stock firmware in hopes of removing any trace of files that may have been altered during the various root tutorials I followed, but Samsung Pass says the device is still rooted.
What do I need to do to return to 100% stock?
Click to expand...
Click to collapse
I assume you unlocked the bootloader. Try Relocking and flash the firmware again.
Weather that will work is anybodys guess.
Rooting is a pretty simple procedure I can't think of any reason it didn't work except user error.
This method works perfectly on T860.
***********************
https://forum-xda--developers-com.c...-to/root-guide-t860-root-twrp-method-t4095677
jhill110 said:
I assume you unlocked the bootloader. Try Relocking and flash the firmware again.
Weather that will work is anybodys guess.
Rooting is a pretty simple procedure I can't think of any reason it didn't work except user error.
Click to expand...
Click to collapse
Well, this isn't the first time I've rooted a device and I followed every step of every tutorial I found on here and, for some reason, it would not root. This is the first, and only, device I've had this much trouble with.
The tutorial for rooting without TWRP: I made the patched AP file and flashed it; however, I could not boot into recovery or download mode and it always stuck on the boot logo.
The tutorial for installing TWRP didn't have a link for the encryption disabler and the one I found did absolutely nothing and the folders in storage just showed as a string of numbers and letters.
Maybe, if someone could put together a full tutorial with the files being used within the tutorial, it would have worked.
noxarcana said:
Well, this isn't the first time I've rooted a device and I followed every step of every tutorial I found on here and, for some reason, it would not root. This is the first, and only, device I've had this much trouble with.
The tutorial for rooting without TWRP: I made the patched AP file and flashed it; however, I could not boot into recovery or download mode and it always stuck on the boot logo.
The tutorial for installing TWRP didn't have a link for the encryption disabler and the one I found did absolutely nothing and the folders in storage just showed as a string of numbers and letters.
Maybe, if someone could put together a full tutorial with the files being used within the tutorial, it would have worked.
Click to expand...
Click to collapse
Did you get the bootloader unlocked?
Unlocking the bootloader:
https://www.getdroidtips.com/how-to...to_Unlock_Bootloader_on_Samsung_Galaxy_Tab_S6
To get to download mode it's volume up and volume down then plug your pc into device. NOT POWER AND VOLUME DOWN. This can be a pain in the back side.
If you do it this way you'll get the option unlock / lock bootloader or go to bootloader mode.
If you follow the instructions perfectly and then follow the instructions for rooting it will work.
Move on to root.
ROOTING :
https://forum-xda--developers-com.c...-to/root-guide-t860-root-twrp-method-t4095677
AP SLOT = PATCHED FILE
BL SLOT = BL FILE
CP SLOT = CP FILE (T865) NOT T860... T860 HAS NO CP FILE
CSC SLOT =HOME CSC FILE
DON'T forget to setup WiFi before installing magisk manager. ^^^^^^^^^
Install TWRP.
TWRP :
https://forum-xda--developers-com.c...b-s6/development/recovery-twrp-3-3-1-t3975587
I hope this helps you out.
If you have anymore questions just ask.
Disable DM VERITY ENCRIPTION DISABLER
PATCHED ODIN
jhill110 said:
Did you get the bootloader unlocked?
Click to expand...
Click to collapse
Yep, bootloader unlock was easy. I'll give root another try with your steps in a couple of days when I'm off work. Sorry if I came across a bit aggressive in my previous posts; I have a tendency to do so even when I'm not frustrated.
This has been so frustrating to me because I know rooting is usually a simple process; as you said previously.
jhill110 said:
ROOTING :
https://forum-xda--developers-com.c...-to/root-guide-t860-root-twrp-method-t4095677
AP SLOT = PATCHED FILE
BL SLOT = BL FILE
CP SLOT = CP FILE (T865) NOT T860... T860 HAS NO CP FILE
CSC SLOT =HOME CSC FILE
DON'T forget to setup WiFi before installing magisk manager. ^^^^^^^^^
Click to expand...
Click to collapse
So, yea, I'm a bit late getting around to this. Sorry.
This is where things get hung up. Everything flashes just fine and I can even get into TWRP; however, when I try to boot the tablet i get the Galaxy Tab S6 screen, then the warning about the bootloader being unlocked, and back to the Galaxy Tab S6 screen but with a "unofficial software" warning....and repeat. It just boot loops and this is where I've since I started this thread.
Also, returning to stock doesn't completely remove root traces as I can't use Samsung Pass and I simply get a warning about the device seemingly being rooted even though it isn't.
If you installed TWRP, then you tripped Knox tripping Knox will permentally disable Samsung Pay as far as I'm aware. You'll never get it back, regardless of root or no root access.
Also, I'm not sure why you're installing TWRP AND trying to flash a Magisk patched OS. It's one or the other, you don't need to do both. Unless something has changed in Android 10?
If you're flashing TWRP, you just need to flash Magisk in TWRP(along with the other files!), no need to patch AP.
bartleby999 said:
If you installed TWRP, then you tripped Knox tripping Knox will permentally disable Samsung Pay as far as I'm aware. You'll never get it back, regardless of root or no root access.
Also, I'm not sure why you're installing TWRP AND trying to flash a Magisk patched OS. It's one or the other, you don't need to do both. Unless something has changed in Android 10?
If you're flashing TWRP, you just need to flash Magisk in TWRP(along with the other files!), no need to patch AP.
Click to expand...
Click to collapse
Not Samsung Pay, I couldn't care less about that, but Samsung Pass; I guess it looks for knox being tripped now too. That sucks, but I'll make do without it.
I was following the guides posted above. The root guide said to flash a Magisk patched OS and then there was a guide for installing TWRP. I never had this many issues or this much confusion with my 1st gen Tab S; maybe I just haven't kept as close of an eye on these things since I've been without a tablet for awhile before getting the Tab S6.
Anyway, for clarification, all I need to do is flash TWRP and then flash magisk from within TWRP? Or, just install the magisk apk after booting into Android?
noxarcana said:
Not Samsung Pay, I couldn't care less about that, but Samsung Pass; I guess it looks for knox being tripped now too. That sucks, but I'll make do without it.
I was following the guides posted above. The root guide said to flash a Magisk patched OS and then there was a guide for installing TWRP. I never had this many issues or this much confusion with my 1st gen Tab S; maybe I just haven't kept as close of an eye on these things since I've been without a tablet for awhile before getting the Tab S6.
Anyway, for clarification, all I need to do is flash TWRP and then flash magisk from within TWRP? Or, just install the magisk apk after booting into Android?
Click to expand...
Click to collapse
My bad for some reason I just read that as Samsung Pay. But yeah Samsung Pass also doesn't work with root, I'm not sure if that is permanent though as I've never used Samsung Pass, but did come across this thread https://forum.xda-developers.com/general/rooting-roms/samsung-pass-knox-tripped-devices-t3687977 it is possible to get some components of Knox to function again, (I have a working Secure Folder) so might be worth taking a look.
As for you question...
You should give this thread a good read... https://forum.xda-developers.com/galaxy-tab-s6/development/recovery-twrp-3-3-1-t3975587
Basic steps are... Unlock the bootloader and then boot into system and ensure it's unlocked in settings. You may need to connect to the web, I can't remember tbh
First you need to install TWRP, once that is done you need to reboot but YOU HAVE TO boot directly back into TWRP. You cannot boot into system, or TWRP will be overwritten by stock recovery and you'll need to start over again. Once TWRP is installed, boot into TWRP and format data then reboot recovery, flash Kernel then flash encryption disabler then unmount the system and flash Magisk 20.4 - Finally reboot to system.
I'd seriously and strongly suggest reading that TWRP thread to ensure things go smoothly.
bartleby999 said:
First you need to install TWRP, once that is done you need to reboot but YOU HAVE TO boot directly back into TWRP. You cannot boot into system, or TWRP will be overwritten by stock recovery and you'll need to start over again. Once TWRP is installed, boot into TWRP and format data then reboot recovery, flash Kernel then flash encryption disabler then unmount the system and flash Magisk 20.4 - Finally reboot to system.
I'd seriously and strongly suggest reading that TWRP thread to ensure things go smoothly.
Click to expand...
Click to collapse
I'll give those threads a thorough reading over tonight and tomorrow night while at work and then see if I can get this all sorted out Monday when I'm off. I remember Pass still working with root on the original Tab S so I'm hoping it hasn't changed.
Thanks for jumping in to try and help me with this. I'll update within a few days instead of months like my last update. ?
noxarcana said:
I'll give those threads a thorough reading over tonight and tomorrow night while at work and then see if I can get this all sorted out Monday when I'm off. I remember Pass still working with root on the original Tab S so I'm hoping it hasn't changed.
Thanks for jumping in to try and help me with this. I'll update within a few days instead of months like my last update. ?
Click to expand...
Click to collapse
It has definitely changed. Pass doesn't work on my Tab S6 and I'm rooted, I guess Knox is now integrated with alot of Samsung apps now. Not sure if it's possible or not to get it working again though, I've never bothered to research it as I don't need it for anything - But as I said, I got Secure Folder working again, so there's some hope for Pass I guess - That first thread I linked looked promising, but I only skimmed it, because frankly I'm not interested.
If you need anymore help, report back -I'll try my best. Also, the TWRP thread I linked is full of helpful people. :good:
bartleby999 said:
It has definitely changed. Pass doesn't work on my Tab S6 and I'm rooted, I guess Knox is now integrated with alot of Samsung apps now. Not sure if it's possible or not to get it working again though, I've never bothered to research it as I don't need it for anything - But as I said, I got Secure Folder working again, so there's some hope for Pass I guess - That first thread I linked looked promising, but I only skimmed it, because frankly I'm not interested.
If you need anymore help, report back -I'll try my best. Also, the TWRP thread I linked is full of helpful people. :good:
Click to expand...
Click to collapse
Perhaps I'm just not meant to have root with this device. Flashing that kernel causes Wifi not to work, but it does boot. Not flashing the kernel also booted, but I couldn't install Magisk Manager. Other than the bootloader still being unlocked, I'm back on stock firmware.
noxarcana said:
Perhaps I'm just not meant to have root with this device. Flashing that kernel causes Wifi not to work, but it does boot. Not flashing the kernel also booted, but I couldn't install Magisk Manager. Other than the bootloader still being unlocked, I'm back on stock firmware.
Click to expand...
Click to collapse
What firmware are you running?
I remember seeing something about one of the newer Kernels effecting WIFI on Android 10. Assume you're running that?
If that's the case, give the TWRP thread a browse - You maybe able to find an older version of the Kernel that'll work - As far as I'm aware, an older Kernel than what you currently installed will work, but a newer version than currently installed will possibly cause bootloop.
I can't help much with Android 10 specific stuff as I'm still running Android 9 because it's stable.
bartleby999 said:
What firmware are you running?
I remember seeing something about one of the newer Kernels effecting WIFI on Android 10. Assume you're running that?
If that's the case, give the TWRP thread a browse - You maybe able to find an older version of the Kernel that'll work - As far as I'm aware, an older Kernel than what you currently installed will work, but a newer version than currently installed will possibly cause bootloop.
I can't help much with Android 10 specific stuff as I'm still running Android 9 because it's stable.
Click to expand...
Click to collapse
I am definitely on the latest Android 10 update so I'll see if I can find an earlier version that will work. I'll see what I can find out on the TWRP thread.
noxarcana said:
I am definitely on the latest Android 10 update so I'll see if I can find an earlier version that will work. I'll see what I can find out on the TWRP thread.
Click to expand...
Click to collapse
If you can't find an older Kernel (I'm not sure there is one for Android 10), it may be the case that you'll need to wait for the Kernel to be updated.
bartleby999 said:
If you can't find an older Kernel (I'm not sure there is one for Android 10), it may be the case that you'll need to wait for the Kernel to be updated.
Click to expand...
Click to collapse
Yea, it looks like Samsung made some "wifi improvements" in OneUI 2.5 and that's causing some kernel issues preventing wifi from working. I think I could find a kernel fairly easily, but I think I'm just going to wait for a kernel update. If it never comes, I'll find an older kernel. Thanks for the help!