Hi Dear Engineer and Develpoers , I have a critical issues in my rmx1921 . I upgrade to latest version andriod 11 . after that i tried to root it , it gives me destroyed image and recovery . unfortunatlly i have tried tone times to flash or use any system ,but it is in vain coz the device has bootloap .finally i found someone who wrote some fastboot erasing commands , on xda but I took them and use all of them , it removed my manfucterd vendor and wiffi and sim card and even camera and the device canot be read on computer as a sd card and internal phone memory . even my imei is unknown , I managed to flash system via fastboot mode , but i lost every thing in my mobile, (camera wifi sim cards imei )
even my bluetooth have broken down but luckly i could find bluetooth.img then flash it via fastboot moood ,it get worked .
Is there any flashable files to get back my device useabla?
plz answer me sir
my facebook is mohebmousa
Related
So I think i bricked a smart 3 , by faulty formating it , i used flash tool to format everything in it , I wanted to make a clean install of a custom rom that worked before thru same software , now when I try to install it again it says BROM ERROR : S_DA_DRAM_NOT_SUPPORT (3004) and H/W: The Handset doesn't support DRAM . Please ask for help.
Can someone link the files or may be tell me what to do ? I think i need to install that two , because i formated it forgetting i don't have that 2 files .
a friends of mine has this phone HTC 601 DUAL and he accidentally deleted some of the Sense files on his phone and the phone stock in boot logo after that. he took it to a repair shop , they couldnt fix it. after 3 days of struggling with it I managed to boot a recovery on it with fastboot and flash a stock 1.18 jb rom on it. everything works fine now even wifi and bluetooth are alright., but it doesnt recognize simcards . no network signal.
*#06# shows : null null .
setting - - > info --- > ... --> baseband unknown.
I tried to rewrite the imeis with fastboot , but it fails.
however the fastboot imei test shows the sim1 imei code correctly
I've tried to flash a radio img .zip file from this thread on the phone but it shows installation aborted .
the phone is unlocked and has s-off.
I'm begging you can someone help me with this ??
a download link for acomplete Stock ROM that contains radio files for this phone would be appreciated...
this is the worst developer friendly device I've ever came across to..
danyno1 said:
a friends of mine has this phone HTC 601 DUAL and he accidentally deleted some of the Sense files on his phone and the phone stock in boot logo after that. he took it to a repair shop , they couldnt fix it. after 3 days of struggling with it I managed to boot a recovery on it with fastboot and flash a stock 1.18 jb rom on it. everything works fine now even wifi and bluetooth are alright., but it doesnt recognize simcards . no network signal.
*#06# shows : null null .
setting - - > info --- > ... --> baseband unknown.
I tried to rewrite the imeis with fastboot , but it fails.
however the fastboot imei test shows the sim1 imei code correctly
I've tried to flash a radio img .zip file from this thread on the phone but it shows installation aborted .
the phone is unlocked and has s-off.
I'm begging you can someone help me with this ??
a download link for acomplete Stock ROM that contains radio files for this phone would be appreciated...
this is the worst developer friendly device I've ever came across to..
Click to expand...
Click to collapse
The radio partition or hboot probably got corrupted. And you cant flash a radio from zara, as zara and zara_dug have completely different SoCs.
Where did you get the stock rom from? What was the reason of going S-OFF?
patrik.KT said:
The radio partition or hboot probably got corrupted. And you cant flash a radio from zara, as zara and zara_dug have completely different SoCs.
Where did you get the stock rom from? What was the reason of going S-OFF?
Click to expand...
Click to collapse
thank you for your reply
I had searched the internet before and found another person having the same exact problem :
http://forum.gsmhosting.com/vbb/f485/htc-desire-601-dual-sim-6160-rom-need-urgently-1870953/
he hasnt been able to fix this up to this day.
I downloaded the rom from this link.: https://drive.google.com/uc?id=0By1bFhqM0X9PZU1Vcm5XaXpkN2s&export=download
the reason to s -off? it didnt let me flash any zip file or even flash a custom recovery. ( i was actually forced to boot a recovery via fastboot on the phone...)
what are the soloutions for me now?? is there way to successfully rewrite imeis on this phone? it fails with fastboot rewriting command , and the mtkdroid tools , doesnt work on it . the phone is rooted though
Basicly loaded a dual sim rom on a single sim Acer Liquid Z200.
was helped so far in this thread: http://forum.xda-developers.com/and...ms-cwm-root-acer-liquid-t2960787/post59482099 by @Shreps, but somehow i got this message that due to the 10 post rule i wasnt able to post anymore.
Downloaded the last zip file, but CMW doesnt seem to recognize my SD card.
Tried to load the rom with adb using sideload, but get the message cant find device.
Is it possible to load another version of CMW, mount it with USB and flash the zip file from the pc? And can i use any CMW file or are the custom made for each type of phone/brand?
Any other suggestions, got no clue what to do now
edit 18-3-15:
Tried to re-load CWM with Smart Phone Flash Tool and got this PMT changed for the ROM; it must be downloaded
Update:
Did a format of the device using Flash Tool, MTK USB poort was loaded and was able to flash the ROM for dual SIM.
@stef951
Try to flash this firmware from a Recovery :
update-Acer_AV0K0_Z200_1.012.00_EMEA_GEN1S-sds.zip
It's the stock firmware Single SIM EMEA GEN1s, you should back to your original firmware.
Click to expand...
Click to collapse
used recovery to install the firmware for sinlge SIM.
However now stuck with IMEI issues.
Used Mobile Uncle Tool and MTK Engineering to get into Engineering mode, but get this message: "cannot find engineer mode app"
*#*#3646633#*#* doesnt do anything. Possible that Engineer mode isnt installed? And is it possible to install it on my device?
Tried to load IMEI with MTK droid gave me a message "Changes will come into force after reset", but nothing changed -_-
Any other options on this IMEI matter.....?
Finally found a solution to enter Engineering mode, type *#*#2237332846633#*#*
When i try to change the IMEI with AT commad get a message AT command is failed to send
Tried Uncle tools, but unaible to acces engineering mode with this app.
I can enter a valid IMEI in MTK tools, but after reboot its still unknown.
Tried to copy a new MP0B_001 file to the NVD_IMEI folder
but all failed :crying:
Still searching for the solution, but if someone over here can help me out it would be appreciated.
Phone is not reading SIM card neither, is this because of the IMEI issue?
Acer Z200 Working again!!!
GOT MY PHONE BACK TO LIFE!!!
Lost the serial number and IMEI, had to write them back to NVRAM using Maui META tool.
Tutorial how to found on http://www.gizbeat.com/6058/how-to-...-for-mtk6582-mtk6572-mtk6592-mtk6589-mtk6595/
In the attached ZIP the files i used for the Maui META tool
Android_Gadget_CDC_driver, CDC driver didnt got installed so had to do this manually.
MTK6572 database: BPLGUInfoCustomAppSrcP_MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V1_P3_1_wg_n
If you have the serial and IMEI number, go to method B under Restoring Values and add the manaully.
When loading the MTK6572 database i also got a warning: execution warning nvram database file is inconsistent with target load
Ignored the warning and just writed the serial and IMEI to the device.
Disconnected, rebooted and got a working serial and IMEI.
So happy that the damn thing got working again.
bro I saw your successful post about Acer Z200. but I can't install CDC Serial Driver .
. how to Install Manually ? Android_Gadget_CDC_driver, CDC driver.
Can you explain to me.
Thanks in advanced
Before flashing I have used a SD card..Then unfortunately I have bricked my phone then flashed with stock ROM.But after that it shows that invail IMEI in both sim and that memory isn't supporting and worked one time but not now again.I have showed it to expert they said that SD port is OK.I have tried to change IMEI but in engineer mode it shows this isn't available in user built mode. After adding a space after AT I have entered my another broken phones IMEI but after restarting the IMEI remain unchanged
NOTE: I have changed the format before flashing with twrp recovery. Don't know if it is having bcs of this.But then why one time supported?
I installed the grobal beta miui 11 rom from the link given on the pocophone telegram official group.... but after i installed that rom my phone was not receiving signals on both of the sims so i checked for imei but imei number wasnt available on the device so i tried to switch to previous rom but it didnt install and ended up with error 7 so now i cannot install any previous rom on my device and neither getting signals on this miui11 global beta rom....
searched solutions on google and tried using qpst tool and qualcomm imei rebuilder but it didnt help...
please help me urgently as i am stuck and dont have any other phone.... sending this threat from my friend's laptop :crying::crying::crying:
return to stock.
enter fastboot mode .. connect to pc, start mi flash tool and flash miui 10 global/eu stable.
or
twrp .. wipe all + format data, install some custom rom.