Low sound volume - Google Pixel 3 Themes, Apps, and Mods

The sound on my pixel 3 is real low . Is there a mod out there that will increase the volume
Tia

if the phone originally came with low volume I wouldn't suggest using any kind of mods it cants destroy your speakers just get BT speakers they are really cheap nowadays

Bluetooth speakers won't help with the low ringer volume as carrying around a Bluetooth speaker is not feasible

Robshr said:
The sound on my pixel 3 is real low . Is there a mod out there that will increase the volume
Tia
Click to expand...
Click to collapse
Have you checked the speaker grids? Dust covered and blocked mine so completely that I could not hear a thing! Both speaker and earpiece were blocked. To check this, wipe with a damp cloth and blow on the speakers. If the volume increases you found your problem, just as I did. But... to really correct the problem you will need to get a professional cell phone repairman to disassemble the handset or, do it yourself. Personally, I was content with the results from cleaning it without opening it.

Related

XDA Headset really quiet

I am using the original XDA headset and I have the volume on the unit set up to max.
However it is really, really quiet on the headset, so much so that I have to wear phone earphones but still its almost in audible.
My question - is there any way to increase the volume further on the headset. By the way its fine when I put it on speaker, or I use the phone directly with no headset.
Any thoughts?
Primed
Silly I know, but have you checked the volume control on the chord?
Volume on XDA is at maximum
Yes the phone itself may be on the highest volume, and this is something I did when I first got my xda...
have you checked the little slider that's on the earphone cord, as even if you have it set to max it's still controlled by the slider on the cord itself. Try flipping it the other way or something...
Cheers
Anthony
low volume in the headset XDA
Is there already any solution to increase the volume? The XDA volume is already on maximum. It is good enough by quiet enviroment, but the benefit for this headset shout be to use it during driving. With the normal driving noise you can not hear anything. Please tell me any feature or software to make it possible to increase the volume for headset.
Thanks for any help
there is a volume control on the xda, and there is a volume control on the earphone wire (a slider).
however, because the xda earphones were not designed to fit into human ears, they tend to slip around and hence the sound is not directed straight into the ear, giving the impression that it is not very loud. you can check this by physically holding the earpiece in your ear and moving it around, till you hear an improvement in sound.
two solutions. You can either find a pair of the soft foam cups that wrap many earpieces. Or you can buy a converter jack for the xda, that will allow you to plug in a standard jack on some better headphones.

Best audio boost method?

Anyone had any success with an app to boost the speaker volume of the NC?
I read that Audio Boost 2 doesn't alter speaker volume much. I have not tried anything yet, but would any audio app with an EQ function allow boosting all freqs. work? I know that there is a chance of overdriving the speaker, but I want to try to get this "fixed". The speaker volume is the single most annoying issue with my NC. Mainly with sources with audio tracks that are recorded at low level.
Any help is appreciated.
Thanks,
kev
bugeyed1 said:
Anyone had any success with an app to boost the speaker volume of the NC?
I read that Audio Boost 2 doesn't alter speaker volume much. I have not tried anything yet, but would any audio app with an EQ function allow boosting all freqs. work? I know that there is a chance of overdriving the speaker, but I want to try to get this "fixed". The speaker volume is the single most annoying issue with my NC. Mainly with sources with audio tracks that are recorded at low level.
Any help is appreciated.
Thanks,
kev
Click to expand...
Click to collapse
Obviously, no-one did much. The worst part is NC's CM7 devs don't see it as a problem.
However, if you could talk dalingrin into looking into the issue (I myself failed to entice him to do anything), then there are some chances with his forthcoming new audio pipeline/ALSA commits.
As of now, when on CM7, you may try to play with DSP Manager's equalizer. Doesn't do much, agreed.
-------------------
fineoils.blogspot.com <<-there's not many answers here, but there's plenty of questions, sure
Only luck I'm having is headphones. Its really bad when the speaker is pushed up against the back of my case. Volume is horrible.
Use earphones will be the best bet for the time being.. Unless is CM7 got vol boost...
you can try poweramp, it has audio boost eq
yes its work withe me
Played around with Poweramp. Adjusted EQ midrange boost, keeping bass low & boosted Preamp setting & have determined that the speaker may just suck! Unless Poweramp EQ is adding distortion when the levels are boosted, the speaker can't handle much volume before breaking up. There may be no hope that the NC will ever have decent volume.
I find the volume on many sources to be barely adequate for personal listening in a quiet room, but for showing another person a video in a not so quiet environment, it is barely audible. I have also noted that the audio quality from the headphone jack is really poor when compared to any decent MP3 player. Looks like B&N saved $$$ on the audio section in order to bring us the nice screen & other quality hardware. I think that I am OK with this, but it would be nice to have it ALL!
Cheers,
kev
P. S. This may end my search for an internal solution to the volume level. Probably keep experimenting with small phone jack based amplified speakers.
The volume seems fine to me.
Hopefully we can have a stable Bluetooth stack working, so that we can pipe to audio to BT Speakers...
I really think the physical speaker is just crap. At the end of the day, you can't fix crap.
A. Nonymous said:
I really think the physical speaker is just crap. At the end of the day, you can't fix crap.
Click to expand...
Click to collapse
That's the conclusion that I am coming to. Seems B&N found it necessary to keep the output level low so the speaker doesn't break up. Be fun to remove it & connect another more efficient one that can handle more power. I think I will continue to experiment with the small headphone connected powered speakers.
Cheers,
kev
bugeyed1 said:
That's the conclusion that I am coming to. Seems B&N found it necessary to keep the output level low so the speaker doesn't break up. Be fun to remove it & connect another more efficient one that can handle more power. I think I will continue to experiment with the small headphone connected powered speakers.
Cheers,
kev
Click to expand...
Click to collapse
I would be interested in seeing how much it would cost to solder in a "good" speaker.. I would think there would be a bit more space to squeeze in a decent speaker or possibly two?
First thing I thought of before I even bought my nook was what speaker was I going to buy for it! When I saw it in stores, I knew there was no way that speaker was going to do anything, and it made me wonder why it's even there. Considering that it's not loud enough for audio books really and mp3's would just play way too low, I think they should have just left it out and added 2 aux ports! Okay, that might not be realistic, but still!
I've opted for a portable iHome speaker from Wal-mart(it's the one that is a round cylinder and if you buy two you can have them hook to each other) for only $20 and should be getting it today. Unfortunately my PSP speakers blew out or that would be perfect for the nook since those things were loud enough to start a party.
Try my mumusicon it has got a sub increase function and that increased my nc's speaker volume more than 40 percent without causing distortion
Sent from my LogicPD Zoom2 using XDA App
I wonder if its possible to add in one of those tiny compact laptop subs too. My dell xps has one on it, they might be too thick though.
Sent from my SCH-I500 using XDA App
dashy_kan said:
Try my mumusicon it has got a sub increase function and that increased my nc's speaker volume more than 40 percent without causing distortion
Sent from my LogicPD Zoom2 using XDA App
Click to expand...
Click to collapse
link for this app?
nolook said:
link for this app?
Click to expand...
Click to collapse
I think it's a typo. I searched the Market and found "MyMusicOn Music Player".
https://market.android.com/search?q=mymusicon&so=1&c=apps
Pre-dawn raid said:
I think it's a typo. I searched the Market and found "MyMusicOn Music Player".
https://market.android.com/search?q=mymusicon&so=1&c=apps
Click to expand...
Click to collapse
Well, I dnlded Mymusicon & don't see any way to adjust the volume???
Edit: OK, tapped the album art screen & got another menu. Under "volume" there is a "sub" adj. that increases volume some.
I use DSP Manager to just raise all the EQ levels all the way up. It's pretty loud now.
stoopid but helpful
With the CN facing you in landscape, hold it up with your left hand. Put your right hand palm flat on the back of the device, gradually moving your palm to the right. You find a 'sweet spot' where the speaker is amplified about 50% by reflecting towards you off your palm.
Play around a little & you learn if your hand should be half way out from under the CN at the right side for loudest clearest sound (what sounds best to me) or palm cupped or flat.
An easy DIY aplifier would be a piece of flat plastic (like cut from milk bottle) adhered with a tiny bit of velcro at the 'sweet spot'. Could be detatched for travel, not need bulky external speakers, yet deliver noticably louder sound.
No software required

Headphones Too Loud

Not sure if I'm just getting old, but dang the volume seems way too loud when I try and use headphones on my GT 10.1 Wifi. Even on the lowest level. Any way to lower the default volume level for headphones?
Yes, this is a volume level software defect stupid Samsung engineers screwed up. Its mind boggling how they tested this and thought to themselves "Yes, this is good".
Going from mute to the lowest volume level is ridiculously loud in a quiet room when using either the speakers or head phones. The funny thing is going to the next 2 or 3 steps up barely increases the volume. Its all screwed up.
It really does suck and Im not sure Samsung has any plans on fixing this.
5thElement said:
Yes, this is a volume level software defect stupid Samsung engineers screwed up. Its mind boggling how they tested this and thought to themselves "Yes, this is good".
Going from mute to the lowest volume level is ridiculously loud in a quiet room when using either the speakers or head phones. The funny thing is going to the next 2 or 3 steps up barely increases the volume. Its all screwed up.
It really does suck and Im not sure Samsung has any plans on fixing this.
Click to expand...
Click to collapse
If you rooted flash a kernel that supports voodoo sound, then download voodoo control or voodoo control plus and lower the headphone amplifier.
That does not work. Voodoo control does not work to lower the volume. Yes there is an option to lower the gain on the amplifier but it does not work and its very buggy when you map the hardware volume buttons to the voodoo gain control. I tried it.
5thElement said:
That does not work. Voodoo control does not work to lower the volume. Yes there is an option to lower the gain on the amplifier but it does not work and its very buggy when you map the hardware volume buttons to the voodoo gain control. I tried it.
Click to expand...
Click to collapse
Voodoo control works for me. Rooted with Starbust UEKME and pershoot's kernel. I have custom IEMs with an input sensitivity of 119dB at 1mW. I have to set it to -55 dB on Voodoo.
ya but thats just for headphones. Does not change the speakers volume.
But it would work for the op as he was talking about headphones
Sent from my GT-P7510 using xda premium
For some reason I don't have this problem. I have never used lower volume then about 25%, usually it's at about 50%. BTW my hearing is just fine. I use a-JAYS Three headphones.
I think the impedance of the headphones plays a role in this. Headphones with lower impedance are louder.
Yes impedance definitely plays a role but the problem is with standard headphone impedance the volume is WAY too loud.
This is a big problem with the tab 10. Speakers play way too loud at the lowest volume setting....you hear me Samsung!! You hear me!!!!!
I just tried the built in speakers, one step up from muted and i can hear that it's playing very quietly if i hold the tablet normally. I need to put my ear next to the speaker to really hear enough to understand what song is playing.
So clearly my tablet doesn't have this problem.
On a standard UK rom here and my speakers appear to be fine, not too loud. Odd.
UKseagull said:
On a standard UK rom here and my speakers appear to be fine, not too loud. Odd.
Click to expand...
Click to collapse
There is nothing odd about it. Your unit is exactly the same as ours. Different people have different hearing sensitivity. My hearing is excellent and above average so I can hear the music play too loud even on the lowest setting. Others will figure it is fine as hearing sensitivity varies.
The volume levels are simply all screwed up. You can see for yourself as turning the volume from 1 to the next 2 levels and the volume barely increases. Going from 1 to 2 almost does not even increase the volume at all. Going to 3 only increases it slightly then 4 and up increase at too high of levels to make up for the lack of volume increase going from 1 - 2 and 2 - 3. The levels are all screwed up. Horrible job by samsung.
I also have this issue!! The volume can' t be changed when using headphones and the volume is too loud for normal use
You can buy headphones with a volume control or a in-line volume control adapter for headphones but that still does not resolve the issue for the output to the speakers.

Aria earpiece speaker issues - HELP!

OK, so my earpiece speaker quit working most of the time. I figured it was just a broken part, and I ordered another one. However, when the new one got here, I discovered that it required removing the screen to replace it, and also requires that tri-wing screwdriver that nobody has, so I put that job on the back burner.
Then I discovered that with the call in Speaker mode, I can hear just fine.
So, it appears the earpiece speaker is not actually broken, right? I can hear it when the phone is in speaker mode (although it's real loud... lowest volume is still louder than the loudest normal earpiece volume). So that speaker MUST be working, if I can hear it... but just not working when not in speaker mode.
In that case, does this indicate something software-fixable with the earpiece speaker?
And more on point: is there any way to force the phone to always or by default answer and make calls in speaker mode?
When the phone is in 'speaker phone' mode, the sound is coming out of the speaker on the BACK of the phone (next to the camera), not the earpiece speaker. So if you are hearing sound just fine from the speaker on the back of the phone, that would just confirm that the problem is in fact the earpiece speaker.
I've had this problem too with putting the speaker in. It took a bunch of tries to realize that you really need to make sure the speaker snaps up in there and remains tight when you put the phone back together, if it slips out a bit it wont work.
Also, it's kinda hard to figure out if you've put it in upside down, so try flipping it a couple times to see what works. Look at the dust marks for evidence of how it was originally in there.
Best of Luck!
drumist said:
When the phone is in 'speaker phone' mode, the sound is coming out of the speaker on the BACK of the phone (next to the camera), not the earpiece speaker. So if you are hearing sound just fine from the speaker on the back of the phone, that would just confirm that the problem is in fact the earpiece speaker.
Click to expand...
Click to collapse
Maybe on YOUR phone, but on MY phone, the sound is coming from BOTH the speaker on the back, AND the earpiece speaker.
I mean, I guess it is remotely possible that somehow the sound coming form the rear speaker manages to make its way to the cavity where the earpiece speaker is and sound perfect, crystal-clear, and just like the earpiece speaker should sound. I find it unlikely, but it's possible, I suppose. I don't know any way to tell.
I found an app that will put the phone in default-to-speakerphone mode (Car Mode). This works kind of ok, but the problem is that plugging in a headset doesn't override it. Of course the whole purpose of this app is to keep it from going into headset mode when you plug something into the headphone jack. I just need to have the phone simply turn on the "speakerphone" speaker when I answer or place calls in normal mode.
mr72 said:
I mean, I guess it is remotely possible that somehow the sound coming form the rear speaker manages to make its way to the cavity where the earpiece speaker is and sound perfect, crystal-clear, and just like the earpiece speaker should sound. I find it unlikely, but it's possible, I suppose. I don't know any way to tell.
Click to expand...
Click to collapse
I agree that it's difficult to tell, but that must be what's happening. The two speakers are just half an inch apart and are only separated by a few internal components that do little to muffle sound. I don't think it's unusual that the sound would be clear when putting your ear to the front top of the phone. I definitely admit though that it's difficult to verify this -- I was trying to find an app that could play a sound directly to individual speakers one at a time but I couldn't find anything.
But, even if we assume that you're correct and the earpiece speaker works, that doesn't really leave you with many options. If it's a software issue, then you should do a Nandroid backup and then try doing a 100% clean install to see if the problem disappears or not. If it doesn't, then it must be a hardware issue. If the hardware issue isn't a matter of simply replacing the earpiece speaker, then it's not something you would be able to fix anyway.
drumist said:
If the hardware issue isn't a matter of simply replacing the earpiece speaker, then it's not something you would be able to fix anyway.
Click to expand...
Click to collapse
I imagine replacing the earpiece speaker would probably fix it.
However, it's just too risky for me to have to remove the screen and digitizer in order to replace the speaker, when I have a workaround that is working.
Anyone know of a way to replace the speaker without removing the screen/digitizer?

[Q] Speaker noise

I noticed when pressing a button on this phone and put the speaker to your ear you can hear some noise through the speaker. Like a low hissing sound. Then after a second it stops until you press another button.
Also when playing a YouTube video or game and turn the volume all the way down you hear the same noise. Infact if you run a game and go back to your home screen the noise is there until you quit the app.
The noise can only be heard if you put your ear to the speaker so it's not a major issue I just found it strange and wondered if everyone's is the same?
I just checked and the noise does stop when going back to the home screen from a game. Yesterday when I tested it the noise was still going. Must have been a particular app.
Can somebody check this on the z2 to see if this is normal? Thanks
You have to put your ear to the speaker to hear it, its just a slight hissing sound.
It happens when pressing the home/back/multi tasking buttons or when typing on the keyboard. Basically whenever the phone makes a button press sound and the speakers become active to play the sound
its totaly normal for the hissing sound to exist however some speakers can output the sound alot more easier than others and some you cant hear it at all
its normal for it to be heard from Z2 Unless its very louder than it should be, it should be only noticed using headphone or putting your ear very close to the speaker
Envious_Data said:
its totaly normal for the hissing sound to exist however some speakers can output the sound alot more easier than others and some you cant hear it at all
its normal for it to be heard from Z2 Unless its very louder than it should be, it should be only noticed using headphone or putting your ear very close to the speaker
Click to expand...
Click to collapse
Thanks for verifying that Envious, i can only hear it when putting my ear to the speaker. While i am here i might as well get your thoughts on another issue lol There is a thread that's just been posted on here about the bottom speaker being louder then the top speaker. Is this a hardware issue or just the way the phone is designed. Its something i noticed the first day i got the phone.
bruteoutlawz said:
Thanks for verifying that Envious, i can only hear it when putting my ear to the speaker. While i am here i might as well get your thoughts on another issue lol There is a thread that's just been posted on here about the bottom speaker being louder then the top speaker. Is this a hardware issue or just the way the phone is designed. Its something i noticed the first day i got the phone.
Click to expand...
Click to collapse
i actualy dont know
its definatly hardware, i did ask sony Service centre about the issue and since my Z2 is going to be sent for repair ill see if they actualy fix the Bottom speaking being louder than the top one which i did say was a problem and that they will test
it doesnt seem to be an intentional feature since the phone has dual stereo speakers, its anoying listening to music when mostly the audio is one side
Yeah its something i notice when playing games or watching videos. I will try to get a replacement from the retailer and if that fails then i will send it into sony. The vibration sound is definitely too loud on my z2 and i'll get them to check the speaker. :good:

Categories

Resources