Related
I have just received my Iocean X7 Elite and was about to install a new rom. I had successfully rooted the device and then was trying to flash
the recovery with SP Flash Tool.
After the recovery flashed my phone refuses to turn on I believe its somehow bricked but have no idea how this could have happened. I did
format flash i only downloaded the recovery to the device.
In Device Manager when i plug the phone it it either shows up as 'DA USB VCOM Port' or 'MTK USB Port'.
When I try to use SP Tool to flash the stock Rom back onto the device I get an error saying 'BROM ERROR : S_FT_ENABLE_DRAM_FAIL(4032)'
I have no idea what to do next can someone help me.
I have tried what this thread suggests:
bump
same as u..but differ phone model.(N9589)
had a few upgrd...til the recent brick it.
Tried a few version of flash tool and still the same
Joshafc said:
I have just received my Iocean X7 Elite and was about to install a new rom. I had successfully rooted the device and then was trying to flash
the recovery with SP Flash Tool.
After the recovery flashed my phone refuses to turn on I believe its somehow bricked but have no idea how this could have happened. I did
format flash i only downloaded the recovery to the device.
In Device Manager when i plug the phone it it either shows up as 'DA USB VCOM Port' or 'MTK USB Port'.
When I try to use SP Tool to flash the stock Rom back onto the device I get an error saying 'BROM ERROR : S_FT_ENABLE_DRAM_FAIL(4032)'
I have no idea what to do next can someone help me.
I have tried what this thread suggests:
Click to expand...
Click to collapse
Same problem here - tried to install stock firmware and got this error...
these are common problems when flashing MT65xx based phones,
ie : error 4008, 4xxx, 5xxx whatever those codes mean, no explanation after extensive search on google.
once I managed to flash this one phone successfully, but I don't know exactly what I did.
as long as I recall, I tried to delete the whole flashtool folders, re-extract them, let the phone cool down a bit
and oh, try to press volume up, or down button (varies on devices) while connecting to USB, once the flashing progress bar starts, release the button.
In the flashtool option, at the OPTIONS-->DA DOWNLOAD ALL-->, check WITHOUT BATTERY.
and in the option, DA DOWNLOAD ALL--> SPEED, check DO NOT SWITCH SPEED.
try flashing your phone without battery inserted, it works many times for me.
NOTE : BEWARE, flashing your MTK65xx based phone, sometimes this tool tried to REMOVE YOUR PHONE's IMEI information, so take caution !
I haven't managed how to prevent IMEI removal when flashing those phones, because I'm not a developer.
Hope this helps.
tukulll said:
these are common problems when flashing MT65xx based phones,
ie : error 4008, 4xxx, 5xxx whatever those codes mean, no explanation after extensive search on google.
once I managed to flash this one phone successfully, but I don't know exactly what I did.
as long as I recall, I tried to delete the whole flashtool folders, re-extract them, let the phone cool down a bit
and oh, try to press volume up, or down button (varies on devices) while connecting to USB, once the flashing progress bar starts, release the button.
In the flashtool option, at the OPTIONS-->DA DOWNLOAD ALL-->, check WITHOUT BATTERY.
and in the option, DA DOWNLOAD ALL--> SPEED, check DO NOT SWITCH SPEED.
try flashing your phone without battery inserted, it works many times for me.
NOTE : BEWARE, flashing your MTK65xx based phone, sometimes this tool tried to REMOVE YOUR PHONE's IMEI information, so take caution !
I haven't managed how to prevent IMEI removal when flashing those phones, because I'm not a developer.
Hope this helps.
Click to expand...
Click to collapse
Thank you for your reply, but this doesn't help... ;(
Anyone?
I think I figured out that the error above means you are trying to flash an incorrect ROM. Make sure you are using the right one and also make sure you're using the latest version of sp flash tool.
Once I downloaded a later version of the flash tool it began installing the ROM but then a different error appeared.
So I formatted the nand with the sp flash tool.
Then I flashed the stock ROM again and it worked
Formatting it seemed to make the errors go away even though its advised not to do so.
Sent from my iOCEAN X7 using xda app-developers app
vessk0 said:
Anyone?
Click to expand...
Click to collapse
I fixed this error by completely removing and reinstalling other drivers for mtk vcom loader
anyone heard Iocean will recall all of the x7 elite's? i've had a mail today they should do it, but i don't know if it's true or not.
Schumi_wk said:
anyone heard Iocean will recall all of the x7 elite's? i've had a mail today they should do it, but i don't know if it's true or not.
Click to expand...
Click to collapse
I haven't heard about that. Maybe its a fake email. Did it say what the fault was?
Joshafc said:
I think I figured out that the error above means you are trying to flash an incorrect ROM. Make sure you are using the right one and also make sure you're using the latest version of sp flash tool.
Once I downloaded a later version of the flash tool it began installing the ROM but then a different error appeared.
So I formatted the nand with the sp flash tool.
Then I flashed the stock ROM again and it worked
Formatting it seemed to make the errors go away even though its advised not to do so.
Sent from my iOCEAN X7 using xda app-developers app
Click to expand...
Click to collapse
How to format the nand with sp flash tool, I use the latest version?
And can you point me to good original stock ROM?
Thank you!
lolet said:
I fixed this error by completely removing and reinstalling other drivers for mtk vcom loader
Click to expand...
Click to collapse
I tried reinstalling drivers, also tried other drivers, but this doesn't help...
I've had the same problem with the following installation Sp Tools
SP_Flash_Tool_exe_v3.1316.0.150
Rom: MP_mt89_v9_iocean_ousheng_jb2_20130520-184014_zhongyeqing_PC
http://d-h.st/ESX
Iocean X7 Youth
I don't have the same problem but i flashed the latest version of official rom for iOcean x7 Youth : 03 july 2013 : and wtf no more internal sdcard only the rom stockage. So i can't download anything, i can't use camera .
On the official website, I read that before flashing the 20 may 2013 rom one and the 03 July 2013 one, your baseband version have to be 23/04 or higher( you have to flash the 23/04 official rom first). This is only avalaible for the YOUTH version.
So tomorrow i will try what i said below to see if i have internal sd card again.
noob question::: since the iocean x7 young and turbo are the same phones...only different clock rates...will flashing the firmware for turbo on iocean x7 young work??assuming that the mtk6589T and mtk6589 are the same chipset only different clock rates??
Micromax A116 (Cant flash Rom)Brick Problem Solved
tukulll said:
these are common problems when flashing MT65xx based phones,
ie : error 4008, 4xxx, 5xxx whatever those codes mean, no explanation after extensive search on google.
once I managed to flash this one phone successfully, but I don't know exactly what I did.
as long as I recall, I tried to delete the whole flashtool folders, re-extract them, let the phone cool down a bit
and oh, try to press volume up, or down button (varies on devices) while connecting to USB, once the flashing progress bar starts, release the button.
In the flashtool option, at the OPTIONS-->DA DOWNLOAD ALL-->, check WITHOUT BATTERY.
and in the option, DA DOWNLOAD ALL--> SPEED, check DO NOT SWITCH SPEED.
try flashing your phone without battery inserted, it works many times for me.
NOTE : BEWARE, flashing your MTK65xx based phone, sometimes this tool tried to REMOVE YOUR PHONE's IMEI information, so take caution !
I haven't managed how to prevent IMEI removal when flashing those phones, because I'm not a developer.
Hope this helps.
Click to expand...
Click to collapse
Thanks a lot. My Micromax a116 was brick. Now its alive.
Here I am with the same problem in a N920e... AND IT'S NOT MINE! :crying:
I'll have to pay it to the owner if I can't solve this:
DaniPhii said:
Here I am with the same problem in a N920e... AND IT'S NOT MINE! :crying:
I'll have to pay it to the owner if I can't solve this:
View attachment 2243401
Click to expand...
Click to collapse
Clearly: Wrong driver. I had also this error. SPflash tool did not readback. I did not flash anything! I fixed this by showing the nonpresent devices in devicemanagement (google for show nonpresent devices for explanation)
Go to com ports, and delete all mediatek drivers except preloader driver. Now start over. It can help if you choose the same usb port where you had success last time.
SP flash tool shows in the statusbar which driver it is using.
mistraller said:
Clearly: Wrong driver. I had also this error. SPflash tool did not readback. I did not flash anything! I fixed this by showing the nonpresent devices in devicemanagement (google for show nonpresent devices for explanation)
Go to com ports, and delete all mediatek drivers except preloader driver. Now start over. It can help if you choose the same usb port where you had success last time.
Click to expand...
Click to collapse
Yes, you got it
SP Flash Tool couldn't find my phone, but now it works
It's exactly a windoze driver problem.
Going to devicemanagement, in LAN-Devices I a had an Alcatel device,
chosing driver by hand and use the mtk usb driver, now Flashtool finds the phone
Thanks a lotttttttt....
shiv.kbh said:
Thanks a lot. My Micromax a116 was brick. Now its alive.
Click to expand...
Click to collapse
Thanks a lot man i unbricked my bolt a58 with this...thanks thanks...
Hi, I was trying to use Flash tool and Don't know what happend but My Phone is completely DEAD right now even power button is also not working no screen is there (just blank phone).
I am having UMI X2 2GB rom, 32 gb internal memory, 1.5 GHZ (MT6589T) Model.
I tried to use SP Flash tool to recover my phone. Firstly I tried to format the phone, After that I tried to run the correct scatter file for MT6589 (from one of the ROM Posted under UMI-X2).
Drivers for the SP Flash tool is loaded correctly (into my Windows 8 Pc). I was previosly getting error as follow : SP FLASH TOOL ERROR: (8200)
[Platform Error] The load and target are inconsistent!
Now, after searching a lot I found that its something wrong with SP Flash tool version.
So I downloaded SP Flash Tool V3.1304.O.sn119 version. After that I am trying to "Download" the rom (with the correct scatter file for my ROM). but its only showing me RED Bar (with 100%) and after that it does nothing. Its neither showing me any error nor its continuing the process.
I am in serious problem here. Please help me out.
Thanks in advance!
- Umang
umang_nine said:
Now, after searching a lot I found that its something wrong with SP Flash tool version.
So I downloaded SP Flash Tool V3.1304.O.sn119 version. After that I am trying to "Download" the rom (with the correct scatter file for my ROM). but its only showing me RED Bar (with 100%) and after that it does nothing. Its neither showing me any error nor its continuing the process.
I am in serious problem here. Please help me out.
Click to expand...
Click to collapse
Try this version of :
SP Flash Tool
October Official Rom
USB Drivers (if needed)
Works for me.
Necro thread...
I have the same issue.
A couple of days ago the phone just started turning off / locking up when off, and having great difficulty tuning on... i.e. pulling out the battery for a minute or a few times.
Now the phone won't turn on at all. They only sign of life is the charging animation when you plug it in.
Prior to all this, there appeared a window in Chinese with some options. my GF (who's phone it is) just pressed something, no idea what. But she said something about 'drawing on the screen'??? sound like something locked up and the previous frame wasn't deleted from the frame buffer before redrawing the new one... I have no idea.
Anyway, I tried going into recovery to see if there was anything I could do there, unfortunately everything was in Chinese, so not much help. for some reason now, the recovery isn't even working.
Now I can connect to the phone via SPflash, but I get the above response: '[Platform Error] The load and target are inconsistent!'
Some other ROMs I tried give me this response:
'The load to be downloaded is for MT6589;
The target platform is MT6582_S00'
Which is quite suspicious.
Any ideas?
Thanks
hisense HS-U980 bricked....
hi,i have the smartphone hisense hs-u980 with mt6589 or mt6589t, i dont understand.... so, i briched with sp.flash tool and now is ompletly dead,,, can i have ur help-sipport please?
thank u very much
Hs-u980 complete dead/bricked
carretto76 said:
hi,i have the smartphone hisense hs-u980 with mt6589 or mt6589t, i dont understand.... so, i briched with sp.flash tool and now is ompletly dead,,, can i have ur help-sipport please?
thank u very much
Click to expand...
Click to collapse
i have ur same phone and i have ur same problem,my pkone is dead later flash any wrong miui rom from cwm recovery and now is dead,i dont have any idea where is original firmware for sp.flash tool or other how piranha box,please,anyone can please me??? THANK U for read!!!!
I have the same Problem. So frustrating men. If anyone finds a solucion please email me [email protected] ...
SP FLASH TOOL ERROR: (8200)
As i connect my phone it disconnects after 2 seconds..
Please give me a site to download scatter file for my micromax a 310
Tried rooting my phone, the oukitel k10000 max, with sp flash tool and it hard bricked straight away, download and recovery don't work but windows recognizes it's there when I plug in with usb so theres hope, I just can't seem to find a solution that actually works in any way, also I didn't back up nvram or dram so now when I try to flash it gives me the (4032) error code for dram, seemingly can't flash anything at all. Help would be greatly appreciated, might even wire some paypal dough if someone can help me get it working again? Also my drivers are installed properly as far as i can tell, i installed them in the disable driver signature verification start-up mode.
Hi , try to flash this firmware and use latest version of SP Flash tool .
Firmware
http://www.mediafire.com/file/42go1g2gsfacncc/Oukitel_K10000_Max_MT6737N_20171025.zip
SP -Flash tool
https://spflashtools.com/
Teddy Lo said:
Hi , try to flash this firmware and use latest version of SP Flash tool .
Firmware
http://www.mediafire.com/file/42go1g2gsfacncc/Oukitel_K10000_Max_MT6737N_20171025.zip
SP -Flash tool
https://spflashtools.com/
Click to expand...
Click to collapse
Same as always, get the 4032 DRAM error
BauerBird said:
Same as always, get the 4032 DRAM error
Click to expand...
Click to collapse
Try to select the (W/O Battery) in connection from option . : )
Do not panic
Don't worry, I've had this exact issue for a while and fixed it. Do you have anything I could contact you on? I'm not really often on xda so if you had discord for example it'd be much easier.
SBAPKat said:
Don't worry, I've had this exact issue for a while and fixed it. Do you have anything I could contact you on? I'm not really often on xda so if you had discord for example it'd be much easier.
Click to expand...
Click to collapse
My Discord is BauerBird, thank you i didn't think it was possible to fix it
Anyone wanna help me with my K10000 Max? Tried installing the stock rom with Magisk installed, with the Smart Phone Flash tool and it completely bricked my phone. Black screen and wont even respond to the power button. When connecting it with a PC, Windows complains about not recognizing the USB device. Do i have a 200€ brick now that i can toss in the garbage? Please help before the wife finds out and kicks my head in!
EDIT: Disconnected the battery and the phone gave little signs of life again and was actually recognized by the flasher software. Tried to flash a stock image again and it gave me this:
S_FT_ENABLE_DRAM_FAIL
[Description]
l [EMI] Enable DRAM Failed.
[Solution]
l Please check your images to make sure it matches with your phone and download again.
EDIT 2: Figured it out myself! In a deep despair, i tried like a 1000 different roms but nothing worked. Even the backup rom that i made before i first flashed my phone didn't work, giving me a different error, something about the chipset. Today, i wondered why the scatterfile said my rom was for the 6735 chipset, as the K10000 MAX is a 6753 device. Changed the line in the scatter file manually and tried to flash it afterwards and i nearly **** my pants when it actually started flashing the phone. Flash was successful and now the phone is working again. Now i just need to find a working custom rom for it.
I need your discord ID as well, the numbers after # in your name.
SBAPKat said:
I need your discord ID as well, the numbers after # in your name.
Click to expand...
Click to collapse
#0023
Sorry I don't really use discord
Hello guys! I have a problem with one phone that i am trying to fix for someone and I feel sooo, sooo completely lost in all of this as I know almost nothing about this. The cell phone model that is in question is Alcatel One Touch Pop C3-4033x.
It seems to be using a Mediatek chipset and I was reading some of your advices here & there and tried using the program called SP FlashTools but it always resulted in error, in the end. It seems that something is wrong with this phones emmc flash memory. So, I tried transfering some files as a zip files to the SD-card and tried to apply update from it, but it said always: Installation aborted. And then, I have tried looking for a way to flash stock firmware of that specific Alcatel model on SD-card, but I just don't have any clue how to do it, if it is possible, even. Maybe I should just give up trying?
Oh, I almost forgot to write that the phone doesn't have the access to Android OS and USB debugging isn't turned on, because computer doesn't seem to list it and I don't know if there any button combinations that Alcatel uses for this model to get into that fastboot or adb mode, even though have installed mediatek drivers. It can only get into Android System Recovery 3e. That seems to be everything, I think, at least.
Oh guys, I am so, so, so sorry if I am bothering you with this. I just didn't know what or where else to ask this. Thank you sooo much!
Hi download those files:
Firmware:
https://www.mediafire.com/file/bpm4ibsbmr4q6nc/OT-4033X-Without_Mobilis_logo__BY_GSMSERVE.rar/file
SP Flash tool:
https://androidfilehost.com/?fid=11410963190603870440
Driver:
https://mega.nz/#!8VYkQCxD!fkhTrZwFFILDAglO1cR_8pIM4Cel52brZ7RB6QZoc6o
Once you downloaded all right driver open SP flash tool and add Scatter file
MT6572_Android_scatter.txt
Click on Download , connect your phone without battery and see if the process is going on if not try again with battery inside.
If you end up with error do the same thing but now first do Format then after is Finish do Download. Good luck ...
It still displays error :/
Teddy Lo said:
I have tried to do everything like you have said, but it still displays error when i press the Download button, and it displays that error after some seconds pass and also the same happens hen i try to use the Format function. This is the error it displays when i tried with the download button: BROM ERROR: S_DA_SDMMC_WRITE_FAILED (3149)
And this is the same error it displayed when i tried using the Format function: S_DA_SDMMC_WRITE_FAILED (3149)
i am so, so sorry for bothering with this.
Click to expand...
Click to collapse
Try with another version of SP Flash tool little bit newest .
Hi, I'm new to the forums.
Back to July 2020, I tried to install custom ROM for my Redmi Cactus and it has no problem until I wipe the data from TWRP and install the custom ROM but failed, I couldn't remember why. And now the phone is dead, it won't boot, no vibration what so ever, when I charge it the LED turns on but when I plug it to PC it won't detect the phone, no sound and nothing in Device Manager even though I have the MTK driver installed on my PC. I've read this thread and couldn't understand the first step as it says "Open REV4 Bypass tool, off your phone. Click BYPASS Connect phone to PC and Turn ON your phone." but I can't turn on my phone. Also on Step 2 which is the SP Flash Tool thing, it says "Open SPFLASHTOOL choose in Download-Agent No_Auth.bin" but on my SP Flash Tool archive I can't find No_Auth.bin, is it somewhere from third-party or from the firmware itself? Currently I'm downloading the firmware and will try to flash it using SP Flash Tool to see if it works. Any help with this?
Best Regards,
Rev.
bioib said:
Hi, I'm new to the forums.
Back to July 2020, I tried to install custom ROM for my Redmi Cactus and it has no problem until I wipe the data from TWRP and install the custom ROM but failed, I couldn't remember why. And now the phone is dead, it won't boot, no vibration what so ever, when I charge it the LED turns on but when I plug it to PC it won't detect the phone, no sound and nothing in Device Manager even though I have the MTK driver installed on my PC. I've read this thread and couldn't understand the first step as it says "Open REV4 Bypass tool, off your phone. Click BYPASS Connect phone to PC and Turn ON your phone." but I can't turn on my phone. Also on Step 2 which is the SP Flash Tool thing, it says "Open SPFLASHTOOL choose in Download-Agent No_Auth.bin" but on my SP Flash Tool archive I can't find No_Auth.bin, is it somewhere from third-party or from the firmware itself? Currently I'm downloading the firmware and will try to flash it using SP Flash Tool to see if it works. Any help with this?
Best Regards,
Rev.
Click to expand...
Click to collapse
Follow this https://www.droidwin.com/unbrick-realme-6-6i-6s-sp-flash-tool/, of course, skip to download and flash the files that are for the other model, instead, replace from your phone's files.
The whole idea, is that you have to install the LibUSB drivers, so your device get recognized and can bypass the DA/SLAA restrictions for BROM mode, in MediaTek devices. When you can bypass it, then you can flash the proper firmware for your device, you don't need to power on your device for that, as your device is bricked...
Hi, sorry it took me so long to reply, the phone is finally fixed thanks to your guide! How can I make this thread or your post as a solution?
bioib said:
Hi, sorry it took me so long to reply, the phone is finally fixed thanks to your guide! How can I make this thread or your post as a solution?
Click to expand...
Click to collapse
Good to know that. Feel free to post any you consider useful for any user.
if you want to mark this thread, you should edit the tittle, in the thread, adding the word (Solved)