Transforming LG V60 into Bitperfect Network Streamer - LG V60 ThinQ Themes, Apps, and Mods

I am not responsible for any damages that may occur during the installation or after it.​​!!! IMPORTANT !!!:​If you want author to get home - please donate to Armed Forces of Ukraine and help to stop war:
https://www.kmu.gov.ua/en/news/specialnij-rahunok-dlya-zboru-koshtiv-na-pidtrimku-zbrojnih-sil-ukrayini
NOTE:​1. Your Phone must be unlocked bootloader and have magisk root
2. This is only for external audio output - through 3.5mm headset or AUX or external DAC
GENERAL FEATURES:
1. Transform your phone into bitperfect network streamer through direct ALSA output. This feature might work on ANY phone or even TV box
2. Works with any external DACs and if available - allow controls for DAC mixer controls
Lately will create minimal generic build, but for now - only extended variant for LG V60.
LG V60 EXCLUSIVE FEATURES:
1. Should works with native rooted kernel, but tested only with attached custom kernel. All creds and special thanks for it - goes to @ErickG233 . Attached kernel mod the same as A12-V2 Walt variant - but unlocked HPAHiQ - better THD for 2dB, but increase power consumption to 2mA + Activated ES91219c Crosstalk + few custom internal controls for mixer.
2. Ability to choose output device - Depp buffer, Low Latency, Ultra Low Latency, Compress Offload...
3. Ability to choose FIR filter for DAC
4. Ability to choose Headset type - for High impedance for example
5. Ability to activate MQA register in DAC - not tested and probably not works, DAC itself able to unfold more information - but require additional actions from audio primary HAL for which there is no sources.
6. Ability to choose Master mode for I2S - not sure if it works or not, but keep for experiments
7. Ability to set Bit Width and Sample Rate for DAC - not really clear how this should work, but default according to logs playing almost always on 16 bit / 44100 kHz - maybe for you set 24 bit / 88 kHz would sound better
8. Statistics about playback directly from /proc/asound/.../hw
9. DIRECT DAC volume control (warning - set it to 100% if you want to use android sound)
ISSUES:
1. Android. Set all android volume to 0 - any sound from system will switch audio output and will mute your streamer. To fix that bush button "Init LG Hifi DAC" from Settings tab and restart your favorite audio service.
OTHER NOTES:
1. Custom kernel should not be really required (roll is the must anyway) - but tested with it.
2. High Impedance magisk mod is not really required - but tested with it.
CHANGELOG:
- Build120922: Biohazard Pigeon
DOWNLOAD LINK:
MEGA LINK
INSTRUCTION IN: README.txt
SCREENSHOTS:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Had to look it up to know what this was, but thanks for contributing to development of any kind on this device. I am still trying to get up the courage to root.

Please do note that the included kernel does not work for the v600tm on android 12, it causes bootloops.

m can someone write me how to install it on lg v60?

Thanks for your contribution.
Two questions:
1. Do these system settings apply globally (not onlly for these streaming services)? How can I test that?
2. This application is supposed to be used in LAN environment, because it lacks some basic network security configurations.

showgood163 said:
Thanks for your contribution.
Two questions:
1. Do these system settings apply globally (not onlly for these streaming services)? How can I test that?
2. This application is supposed to be used in LAN environment, because it lacks some basic network security configurations.
Click to expand...
Click to collapse
1. Yes - this is global settings. You can change volume and other options and hear difference.
2. Usually I prefer WLAN (WiFi). LAN also should work well or small changes might be required in a few services to make it work with LAN by default.

.

Has anyone tried this on a phone other than a V60? I have a OnePlus 9 Pro and Nord N10 I want to try this on. I'd use the N10 as a dedicated music player exclusively.

I'm having trouble getting this mod to install. It looks like I'm getting stuck at step 7. If someone can give me some help, I'd appreciate.
Also, can this mod be installed using TWRP?
Here's a pic of my issue.

StillUseMyEvo4G said:
I'm having trouble getting this mod to install. It looks like I'm getting stuck at step 7. If someone can give me some help, I'd appreciate.
Also, can this mod be installed using TWRP?
Here's a pic of my issue.
Click to expand...
Click to collapse
I think you didn't switch to usr folder with "cd ~/.."
I updated README #6. Thanks for letting me know.
If you have issues - look inside 'start-pure.sh' and check file names. They are simple enough.
We can use TWRP, but I have not enough time to pack it and in general steps are simple. You are welcome to contribute and pack it in any better way. I will be glad to update instructions

After installing this . Can I use other phone functions? e.g. telegram, Facebook

hạt nhân đính kèm này có hoạt động với phiên bản lgv60 docomo không

Related

Adrenaline ROM Final Edition Mods

- Features -
Beats Audio
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
By RockoDev , repacked by me, credit to him! | Original Thread
I have tested and it works, the sound become a little bit tremble.
For the bass, i think yes, because my headphone sound broken when I set the bass to highest.
Shouldn't be any problem if you didn't set it to highest, if u noticed some broken sound , then set the equalizer to lower bass setting
*I'm not responsible for your dead phone's speaker/headphones
To uninstall Beats Audio, flash Beats Audio Uninstaller via CWM. Remember to mount /system before flashing it
____________________________________________________________________________________
DSP Equalizer
Taken from cm7 by grif-07, credit to him !
Dynamic range compression, equalizer, and headphone filtering.
DSP Equalizer provides you enhanced sound processing capabilities. A simple application called DSPManager is provided to adjust the new audio parameters such as bass boost, 5 band equalizer, virtual room effect for all system audio.
____________________________________________________________________________________
Windows Phone 7 Fonts
____________________________________________________________________________________
beats audio Fonts
Credits to kai.
mount /system before installing
____________________________________________________________________________________
ICS Theme
Credit to Ryuinferno
- Addons -
‼ mount /system before flashing in CWM
Beats Audio Uninstaller
XWKT3 Modem
Radio
Google Calendar Sync
BLN
Voice Speech
Google Contact Backup
Adobe Flash Player
Thanks to NitroOxid and vlzSilver from 4pda. Original Link By Lovetz
- Resized Wallpaper Packs
MIUI Wallpapers Pack
Wallpapers
Simple Fix For APN Setting
Apns detect is fixed in 3rd Edition, but if it doesnt work for you, follow this guide
**For those who have problem with 3G internet.
You can contact your provider and call them sent apn to you (like mine, I just go to their website and type my phone number, then a setting will be sent to me within 5 minutes)
But if your provider don't has this service, here comes a simple fix for you: type in your apn manually.
**Follow my steps.
First, download the apns list and extract it, open the apns-conf.xml by Notepad++
Second, press (CTRL+F) and type your provider's name in the field there, then search !
In my case I search for 'digi'
There may be some similar one but I think u can find the most appropriate one with ur smart brain and sharp eyes
If you don't , try google for that !
Once you found your provider apn setting.
Go to your phone. Open 'Settings' > 'Wireless and networks' > 'Mobile networks' > 'Access Point Names'
It's blank right? Dont worry
Press menu key and you will see this :
Select 'New APN' , then type in your APN setting to here :
Save it and fu** yeah , 3g is now working:
Mass Effect Infiltrator gameplay on Adrenaline ROM Final Edition !
Placeholder
Placeholder
ICS Theme
Regarding #Post Number 01:
if am not wrong then may be i saw some ICS Layout Theme MOD in this post
is it unavailable now?
MOD EDIT: Removed the quoted post.
Please do not quote such long posts as it increases the length of the thread unnecessarily, just quote the relevant part.
RiteshArora28 said:
Regarding #Post Number 01:
if am not wrong then may be i saw some ICS Layout Theme MOD in this post
is it unavailable now?
Click to expand...
Click to collapse
link
'cooleagle' said:
Please do not quote such long posts as it increases the length of the thread unnecessarily, just quote the relevant part.
Click to expand...
Click to collapse
+1 and thanks for the edit
final version black out
Hi ImbaWind,
Installed the fnal version. Works fast. Thank you. But just these last 2 days, after leaving the phone idle for an hour or so, it went dead. Boot again and it works as before. Battery power full. Happened twice. Any idea why and how can I fix it?
I haven meet this problem and no idea so far
ohh! thank you and sorry for that long post
black out
Hello,
The phone still shuts itself down at least once a day. Try wiping data and rebooting. No improvement. My wife asked me to put the old rom back. Tried that using odin. But this rom is really robust and refuses to retire. Any instructions how. Thank you.
kkc153 said:
Hello,
The phone still shuts itself down at least once a day. Try wiping data and rebooting. No improvement. My wife asked me to put the old rom back. Tried that using odin. But this rom is really robust and refuses to retire. Any instructions how. Thank you.
Click to expand...
Click to collapse
Can't use odin to flash a stock ROM?
i get Phone Apk Force Close error after applying ICS theme
Andrenaline rom for galaxy ace s5830
ImbaWind said:
I haven meet this problem and no idea so far
Click to expand...
Click to collapse
sir can you send to me the download link for my galaxy ace s5830 thank you:laugh:
DevilMind007 said:
i get Phone Apk Force Close error after applying ICS theme
Click to expand...
Click to collapse
Try a clean install, if it still doesn't work I think the theme is outdated.
castalonirenz said:
sir can you send to me the download link for my galaxy ace s5830 thank you:laugh:
Click to expand...
Click to collapse
All of my work is available in my sign.

[GUIDE] RemixOS TV

Hey Guys I have been playing around with Remix OS for a few days now, my goal is to use Remix OS as a Set Top Box. In this guide I will be walking you threw some things needed to use RemixOS as a Set Top Box​
SETTING UP
Description: for this guide I will assume you have root access as well as system mounted as RW and Debuggig Console enabled.
Guide:
ROOT
Download this build of RemixOS HERE
DEBUGGING TERMINAL
Enable Debug Terminal Console under Setting>Experimental Features.
HIDE NAV BAR
Setting>RemixOS Options>Enable AutoHide TaskBar
DONT SLEEP
Settings>Display>Sleep> set to never
FULLSCREEN APPS
Setting>RemixOS Options> Windowed Mode Applist> Switch off any apps that you want in fullscreen
LAUNCHER
Description: one of the most important things in a Set Top Box is the launcher. for Android TV there are a few choices for a launcher, here is two of my favorites.
Name: LeanBack Launcher.
Description: this is the default launcher for Android TV.
Guide:
1. Download The Launcher HERE
2. Extract The Zip
3. Copy The Files to /system/priv-app
4. reboot.
Name: TVLauncher
Description: this is my personal favorite launcher.
Guide:
1. Download the launcher HERE
2. Hit ALT F1.
3. type the following in terminal
old Versions
Code:
pm disable com.jide.filelauncher
pm disable com.android.launcher3
pm disable com.google.android.launcher.layouts.device
Version 3.0.207
Code:
pm disable com.android.launcher3
pm disable com.jide.networkconn.googleplay
4. Hit ALT F7
REMOTE
Description: Control your Android TV with another device
Guide:
1. Download Tablet Remote HERE
2. Enable Wifi (Bluetooth untested, ethernet not working)
3. Download Tablet Remote on you phone
4. Connect Android TV and Phone to the same network
5. Open App
6. Go to connection on both devices.
7. press wifi button on your phone
SOUND
Description: if you are like me and use a remote that has external audio you may run into a problem that the audio automatically wants to play threw external audio and not the tv.
Guide:
1. Download SoundAbout HERE
2. Pro is recommended
3. Open SoundAbout and follow the Setup Guide.
4. under media choose AUX HDMI
CAST
Description: at the moment there is no way to cast youtube content to your RemixOS TV. this app will allow you to cast videos and music threw DLNA.
Guide:
Light Version (basic Stuff) HERE
Pro Version (recommended) HERE
YOUTUBE
Description: the stock youtube us tough to navigate on a TV,
Guide:
1. download the apk HERE
2. Install APK
SPOTIFY
Description: casting to your RemixOS TV works but only if spotify is open on your tv
Guide:
1. download the apk HERE
2. Install APK
MORE COMING SOON
SCREENSHOTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MORE HERE​
Can you make this an ISO? I cant seem to get root to work.
great job !!! im gonna test it !
I have installed the latest Remix OS for PC, 3.0.207.
When I tried to run these commands:
pm disable com.jide.filelauncher
pm disable com.android.launcher3
pm disable com.google.android.launcher.layouts.device
Only the com.android.launcher3 worked, the other couldn't be found. Did it change? Also, even though I have it set to Autohide the Taskbar, it's always up for one critical app that I want to use Full Screen.
Any thoughts?
I have 1 question. Is there possibility tof somehow use cable TV (with android tuner)?
Kubas_inko_CZ said:
I have 1 question. Is there possibility tof somehow use cable TV (with android tuner)?
Click to expand...
Click to collapse
Not sure if they sell it where you are, but I'm using this with my Cable in the US. (to new to put a link up, so you can fix the URL
www silicondust com/product/hdhomerun-prime/
I want to use Android hooked up to my TV, but I have an x86 I want to use. Remix looks promising, but the launcher is an issue. With the software provided by the company I linked too, the taskbar remains on the screen even though I have it set to autohide.
handydave said:
Not sure if they sell it where you are, but I'm using this with my Cable in the US. (to new to put a link up, so you can fix the URL
www silicondust com/product/hdhomerun-prime/
I want to use Android hooked up to my TV, but I have an x86 I want to use. Remix looks promising, but the launcher is an issue. With the software provided by the company I linked too, the taskbar remains on the screen even though I have it set to autohide.
Click to expand...
Click to collapse
We have something similar here in Czech (but it is not much common). I forgot, that you will be still using android so stupid question
Does this work on Remix OS for PC 3.0.207?
I would like to use the Leanback Launcher on Remix OS. However I would not want to mess up my current setup and have to start over.
**Edit**
Leanback Launcher did not work for me. Also this is the only command that works on the latest Remix OS
pm disable com.android.launcher3
But it does kill the Desktop, I installed Top TV Launcher 2 before doing this and after I hit the home button on my remote it guided me through setting up my new launcher. It works awesome.
The only thing I would like to know is how to completely kill/disable the taskbar. The Auto hide is ok but sometimes it reappears with some apps.

VIPER4ANDROID FX INSTALLATION_[ANDROID_10/11

Just flash this module via magisk.
ViperFX-v2.3
Thread Updated.
All fine... but in the call notification the sound is bad.
FYI, the guide at https://forum.xda-developers.com/t/4208707/ is similar, apart from keeping selinux at enforcing...
pnin said:
FYI, the guide at https://forum.xda-developers.com/t/4208707/ is similar, apart from keeping selinux at enforcing...
Click to expand...
Click to collapse
In fact, viper4android still works while selinux is in enforcing mode.
but it stands constantly. It is necessary to constantly reboot the device for it to work again.
Macxsico said:
All fine... but in the call notification the sound is bad.
Click to expand...
Click to collapse
read this part well. If you do as I said, you will not encounter any problems.
2b. Install the Audio Compatibility Patch file with Magisk. ---> Options will be as below.
ONLY MIUI ;
Volume UP - Volume UP - Volume DOWN - Volume DOWN - Volume DOWN
For CUSTOM ROMS ;
Audio Compatibility Patch install it and do following :
- Patch audio policy ? > YES and remove old logic
- Patch notification_helper ? > YES and remove volume listener library
- Patch usb policy for usb dacs > NO and NO (recommended)
ryukseloglu said:
read this part well. If you do as I said, you will not encounter any problems.
2b. Install the Audio Compatibility Patch file with Magisk. ---> Options will be as below.
ONLY MIUI ;
Volume UP - Volume UP - Volume DOWN - Volume DOWN - Volume DOWN
For CUSTOM ROMS ;
Audio Compatibility Patch install it and do following :
- Patch audio policy ? > YES and remove old logic
- Patch notification_helper ? > YES and remove volume listener library
- Patch usb policy for usb dacs > NO and NO (recommended)
Click to expand...
Click to collapse
In custom rom have this bug. Only can fix it if I flash the V4 Pie Fix V2. For now not found other solution
Macxsico said:
In custom rom have this bug. Only can fix it if I flash the V4 Pie Fix V2. For now not found other solution
Click to expand...
Click to collapse
If you do as described in the installation, there should be no problem.
Macxsico said:
In custom rom have this bug. Only can fix it if I flash the V4 Pie Fix V2. For now not found other solution
Click to expand...
Click to collapse
there is no extra fix pack. I guess you are installing the audio compatibility patch incorrectly.
It's Works.. Thank u
All good .. Thanks..
ryukseloglu said:
All features are working. If you follow the process as described, viper4android works fine on YouTube and all platforms. --> MIUI and Custom ROMS
Moreover, it eliminates the problem of voice reduction when forwarding videos. --> MIUI ONLY
---> Tested MIUI 12 GLOBAL and Custom A11 ROMS
Before you start installing the Sound Mode, install the SELINUX PERMİSSİVE file with MAGİSK and restart the device.
FOLLOW THE PROCEDURES IN THE ORDER
1. Install the Viper4Android FX zip file with Magisk and
Open the Viper4Android FX application and install the driver and restart.
2a. Install the Audio Modification Library file with Magisk.
2b. Install the Audio Compatibility Patch file with Magisk. ---> Options will be as below.
ONLY MIUI
Audio Compatibility Patch install it and do following :
Volume UP - Volume UP - Volume DOWN - Volume DOWN - Volume DOWN
For CUSTOM ROMS ;
Audio Compatibility Patch install it and do following :
1) VOLUME UP -->{Patch audio policy? > YES}
and
2) VOLUME DOWN -->{Remove old logic}
3) VOLUME UP -->{Patch notification_helper? > YES}
and
4) VOLUME DOWN -->{Remove volume listener library}
5) VOLUME DOWN -->{Patch usb policy for usb dacs > NO}
and
6) VOLUME DOWN -->{NO (recommended)}
Restart the device.
3. Open the Viper4Android FX application and activate LEGACY MOD in settings.
DONE.
SETTİNG FILES --> VIPER4ANDROID_DDC-KERNEL-PRESET FOLDER
---> Copy to folder Android / data / com.pittvandewitt.viperfx / files.
FİLES;
1_Selinux_Permissiver_v2_Magisk.zip indir, download
dosyayı indir, full download - 1_Selinux_Permissiver_v2_Magisk.zip
www.dosyaupload.com
Hata indir
Hata
www.dosyaupload.com
Hata indir
Hata
www.dosyaupload.com
Hata indir
Hata
www.dosyaupload.com
SETTİNG FİLES
Hata indir
Hata
www.dosyaupload.com
Click to expand...
Click to collapse
I'm getting this error after launching v4a installed from Magisk repo
MIUI 12.0.8.0
also tried installing zip with TWRP same error !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thread Updated
atefbeldi said:
I'm getting this error after launching v4a installed from Magisk repo
MIUI 12.0.8.0
also tried installing zip with TWRP same error !
View attachment 5330309
Click to expand...
Click to collapse
I updated the thread. try the above module.
Has any one got poweramp to work with this plz tell thank
Boncey1989 said:
Has any one got poweramp to work with this plz tell thank
Click to expand...
Click to collapse
it should work if you choose ViperFX as the default equalizer. Unfortunately I don't use poweramp.
im rooted but still on stock miui 12. i already installed viper4a and its already working but i can't find a way for it to load my vdc file for my earphone.If I enable the viper-ddc toggle, a pop up message would say to put the vdc files on a specific path, but that path is not is not present on poco x3. I tried rebooting to TWRP and manually created the path and saved my vdc there, but upon reboot, the changes I made are gone.

General [Update].[A13] SparkOS GSI v.13.4 Build 16-01-2023 Unofficial. (New Spark Launcher) (Base T225XXU1CVL5)

Why? Used Android 13 Base.
1. MTP works
2. Offline Charging works
3. Google Assistant can call for you.
<This topic is about new GSI's introduction not howto or tutorial.>
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Changelog for the version v13.4 based on the January security patch
# Version 13.4
- Merged the January Security Patch
- Corrected the unlocking animation for sideFps devices
- Improved Battery level detection for bt Devices
- Adressed some crashes when using the recording button in gamespace
- Improved the Auth ripple animation
- Introduced AOSP boost and memory optimization framework API
- Added support for strict standby policy
- Synced anim durations with Nothing Phone 1
- Added back our weather implementation
- Added selectable ls clock fonts
- Brought back the old media player seekbar animation
- Made the squiggle animation optional
- Added a toggle for hiding notification icons
- Added configurable lockscreen clock color option
- Made more elements follow the systems font
- Added optional haptic feedback to volume panel
- Improved the Bt tile
- Fixed double tap to wake on doze
- Fixed an issue where a white tint would appear in yt videos when adjusting the volume
- Fixed an issue where old settings panel would overlap the volume dialogs default one
- Added an option to pulse on new tracks
- Improved the charging info impl
- Majorly Reworked our Launcher: It includes plenty of redesigns and a bunch of new options
- Added support for custom themed icon pack selection
- Introduced our SparkThemedIcons icon pack
- Merged Crowdin translations
- Revamped the Fireworks Ui
- Added support for googles ultra battery saver
- Added support for googles security hub
- Added a toggle to switch between aosp and pixel battery graphs
- Fixed an issue where battery page would appear empty
- Added a new animation on dark mode settings
- More under the hood improvements aimed to improve the overall systems stability
-Download here :
Gsi_projects - Browse /A13/SparkOS/16012023 at SourceForge.net
sourceforge.net
*Note: Variant "slim" = Read only system.
✓ Supported exFAT micro sdcard.
✓ Default Nazim's GSIs are R/W except "slim" variant
✓ Make CustomAP & Flash with odin.
✓ Changes Display smallest width= 598 dp
*Now you are good to go.
Options
✓ install PHH-SU though Magisk + Root Explorer. (Cause no TWRP)
*I don't use Magisk
✓ Compatible with Vaga Bobo DSU sideloader v2.01
Example: new launcher
you can install NetHunter
https://www.maketecheasier.com/install-kali-linux-nethunter-android-phone/
Offline-Charging
Turn off display alert.
- Setting>>Display>>off Wake on plug
- Fireworks>>Lockscreen>> off Charging animation
@tom.android as you may remember, we recently had a conversation about placeholder threads. You need to post a description as well as a download link as soon as possible, otherwise this thread will be locked.
Taking launcher a ride , looks good
Can someone make a tutorial to make a custom ap? I never flash a GSI before
Lizsca said:
Can someone make a tutorial to make a custom ap? I never flash a GSI before
Click to expand...
Click to collapse
[GUIDE] [T220/T225] Flash a GSI on the A7 Lite (without TWRP)
Hi everyone, this is a short guide on how to flash a GSI on the A7 Lite (without TWRP). Its a nice little tablet for the price but it doesn't have a very powerful SOC and for me the One UI is barely usable on this device. The launcher and the...
forum.xda-developers.com
update new launcher.
I tried but odin failed. I can't seem to get this going working on my tablet (t220XXU1CVL5 android 13) . I gave up. I tried many times. Everything worked good with custom AP. But failed in odin 3.14.1.3B patched.
Putting back my custom AP pixel experience plus arm64 vndkite 13.0 20230104 unofficial. It works very well on my T220 XAR.
Here is the odin failed picture
abc1054 said:
Here is the odin failed picture
Click to expand...
Click to collapse
Please check your customAP(super.img) write fail to partition.
name may be wrong filename
-must be " super.img.lz4" not super_new
Ok thank you
There's only two files in the custom ap , when I opened it. The files were super.img.lz4 and vbmeta.img.lz4. Is that right...? when I did another custom ap it had lots of other files in it.
Is my app batch file problem?. The file is tar-md5-script-tool.zip. I got it in custom AP forum. I know I made a mistake. Missed a step. Lol
Thank you tom...your the best
Well, it still didn't work. Stays on the setup splash screen and that's it. Oh well. Back to the drawing board.
Had more problems .
abc1054 said:
There's only two files in the custom ap , when I opened it. The files were super.img.lz4 and vbmeta.img.lz4. Is that right...? when I did another custom ap it had lots of other files in it.
Click to expand...
Click to collapse
Not at all.
abc1054 said:
Is my app batch file problem?. The file is tar-md5-script-tool.zip. I got it in custom AP forum. I know I made a mistake. Missed a step. Lol
Click to expand...
Click to collapse
Lots of steps on how to build a GSI actually. That batch file is literally one of the last steps. You need to review the GSI guide thread carefully. It's not easy for beginners. Firmware VL7 is now available for the XAR region so you can use that base instead. Good luck.
Ok thanks
abc1054 said:
Ok thanks
Click to expand...
Click to collapse
Or use the automated WSL/Linux script thread.
nirogu325 said:
Not at all.
Lots of steps on how to build a GSI actually. That batch file is literally one of the last steps. You need to review the GSI guide thread carefully. It's not easy for beginners. Firmware VL7 is now available for the XAR region so you can use that base instead. Good luck.
Click to expand...
Click to collapse
Sorry to heard that my topic is not "Howto or Guide or Review but only General information only . please re-read it. Thanks

How To Guide Final UPDATE-(Custom super.tar)(Unofficial) Pixel Experience Plus13.0 GSI VS The Competitors.(crDroid 9.4, AlphaDroid, SparkOS,LineageOS 20 TD)

Why? Custom Super.tar
-Flash system GSI is normal process but Flash Custom Super.tar is not.
Our sources: @xyrn23
https://github.com/ponces/treble_build_pe/releases/tag/v2023.03.29-plus
Note:
》Sync with latest sources of TrebleDroid then no problem with setting UI and swipe from bottom screen to show all icons menu.( Can set any value of Smallest width dp.)
》Why FW XXU1CWA2 ?
-it's the last Firmware for T220 & T225 which can downgrade.
= The T220.T227 can't uses my "Custom super.tar"
SM-T225
( XXU1CWA2 )SM-T220
( XXU1CWA2 )odm.img 4349952odm.img 4349952product.img 1238544384product.img 1234505728vendor.img 652824576vendor.img 640036864super.raw 6094323712super.raw 6023020544
-------------------------​
☆☆☆ Howto install?
1. Flash Firmware "T225XXU1CWA2" with Odin.> connect internet reboot then enable "OEM unlocking" + "USB debugging" + configure update Magisk.
(update 3in1.tar with Magisk v.26.1)<- Download from Attachment below
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2.Flash "super.tar" at AP Slot. [ PixelExperience_Plus_arm64-ab-vndklite-13.0-20230329]
4.94 GB file on MEGA
mega.nz
☆☆☆- you will get "Pixel Experience Plus 13.0" with R/W Super Partition ( can modify "Product" "System" "Vendor") plus frees up a same amount of free space in /system or different ones =150 MB/each.
☆☆☆-Auto Screen Brightness. is ready to use.
By Enable:
1.Setting>System>Status bar > Enable Brightness slider.
2.Setting>Status bar > Enable Auto Brightness. (Show auto brightness button)
3. Set Developer Options: Smallest width= 723 dp
3. Configure bluetooth devices.
=》Bluetooth devices.(Headphone / True Wireless)
Enable Phh Treble Settings (Misc features)
☆☆☆ Do Enable the same as I show below.☆☆☆
-Use alternate way to detect headsets.
-use System Wide BT HAL
-reboot
4. Task menu came with "Recent apps" -had changed itself from your last selected app.
***Don't set Smallest width = 598 dp , you will lost ability of Multi-tasking Menu.
The Purpose of this type menu is for Multi-tasking windows. ( Split screen apps).
5. Google assistant can call from your contact number. (After update all Google apps .)
6. Sync with latest sources of TrebleDroid then no problem with setting UI and swipe from bottom screen to show all icons menu.( Can set any value of Smallest width dp.)
7. Can setup "always show keyboard"
8. Battery usages does not conflict with Auto screen brightness and specific every duration.
9. Charging when power-off device.
it can cut-off (break) informed warranty bit error state. (below)
10. Test before updating.
Its supported Vega Bobo DSU.
11. Phone Calling sound when we wear earbuds or headphone.
Samsung buds 2 earbuds with no problem through calling sound > Calling sound can came from both tab and inside buds2. Same can uses microphone from buds 2 also. ( Call Google assistant)​
12.TV Casting with nightly VLC.
13. MTP USB on Dev Option.
Default USB configuration
-USB
Select File transfer/Android Auto
(U can transfer files with Computer.)
14. How2update without lost historical data.
-Update Pixel Experience Plus 13.0 v2023.04.21 Download
Dirty flash
Code:
adb devices
adb reboot fastboot
fastboot flash system PixelExperience_Plus_arm64-ab-vndklite-13.0-20230421-UNOFFICIAL.img
reboot system.
Dirty Update​✓ NEW fastbootD- Recovery_patched For T225XXS3CWC2
Download from Attachment below.
The Competitor you must try.​✓The crDroid 9.4 A13 GSI .
✓The LineageOS 20 TD
✓The sparkOS GSI.
✓ The Alpha Droid A13 GSI.
(Unofficial)
​
Release v20230419 · ChonDoit/treble_alphadroid_patches
| Sync with sources | Fixed Settings Crash
github.com
Extended Features From
"Pixel Experience Plus"​Note: Only the bad thing is not yet supported "exFAT sd card", and Google Assistant Bugs.
1. Task menu came with "Recent apps"
2. Auto screen brightness.
​3. ADB ROOT Menu from Developer options.
4. Control Google Services GMS & Core.
Smart Charging. ( Set max
​
Waiting For Next version.
}=================={
All my tutorial. (Link)​
CustomAP​FastbootD​Lineage OS TD GSI​Pixel Experience GSI​Spark OS GSI​microG with GSI​TWRP for A11​
How2 ? install Lineage OS "TD" with SM-T225.(Samsung Tablet)
Light doesn't have VNDKLite builds.
Click to expand...
Click to collapse
Light doesn't have Old PHH Treble Setting.
Click to expand...
Click to collapse
This light build has never worked for any Samsung tablets since the dev has expressed his disinterest in making it compatible.
Sure, it flashes successfully...but it always does get stuck on the boot screen. There is nothing that can be done at this point
Click to expand...
Click to collapse
Actually I believe offline charging display isn't working at all, and whether it charges while the logo freezes depends on the device.
Click to expand...
Click to collapse
In "Light" I didn't do any special treatment to offline charging, whereas TD-based does have a few related patches.
Click to expand...
Click to collapse
All of this came from XDA.
Begin with "what does variant to use ?"
More...
LOS 20 Treble Droid.​
new pop up Task menu.
Is this only for t225 ? How about t220 ? Thanks
I was able to get the Pixel Experience to work on my SM-T220 with a lot of messing around.
First, I followed this to get TWRP on my S7 Tab Lite: https://forum.xda-developers.com/t/...lite-wifi-t220-unofficial-android-13.4576343/
Once I was in TWRP, you need to hook up a wired mouse via the USB-C port, which means you need a USB-C adapter ("OTG mouse"). Then you can use TWRP, since the touch screen doesn't work until you have a non-Samsung OS installed
Once I had TWRP on the system, I always used TWRP to boot into Fastmode, then followed along with this video:
The video isn't the most intuitive, but if you have some awareness on how to load custom OSes on a Samsung device, you should be just fine. Otherwise, follow along and Google the commands he uses in the video to see the expected outcome. Again, whenever he's in fastboot mode on here, I used TWRP to get there instead of ADB.
YES, I also installed the fbe_disabler_gta7lite.zip and gta7litewifi_kernelsu.zip from TWRP, then flashed Pixel Experience
4. I had to use PixelExperience_Plus_arm64-ab-13.0-20230329-UNOFFICIAL to get anything to boot.
fonixmunkee said:
I was able to get the Pixel Experience to work on my SM-T220 with a lot of messing around.
First, I followed this to get TWRP on my S7 Tab Lite: https://forum.xda-developers.com/t/...lite-wifi-t220-unofficial-android-13.4576343/
Once I was in TWRP, you need to hook up a wired mouse via the USB-C port, which means you need a USB-C adapter ("OTG mouse"). Then you can use TWRP, since the touch screen doesn't work until you have a non-Samsung OS installed
Once I had TWRP on the system, I always used TWRP to boot into Fastmode, then followed along with this video:
The video isn't the most intuitive, but if you have some awareness on how to load custom OSes on a Samsung device, you should be just fine. Otherwise, follow along and Google the commands he uses in the video to see the expected outcome. Again, whenever he's in fastboot mode on here, I used TWRP to get there instead of ADB.
YES, I also installed the fbe_disabler_gta7lite.zip and gta7litewifi_kernelsu.zip from TWRP, then flashed Pixel Experience
4. I had to use PixelExperience_Plus_arm64-ab-13.0-20230329-UNOFFICIAL to get anything to boot.
Click to expand...
Click to collapse
ok same environment as when i used A11 TWRP with ( OTG Mouse). but this time (no have A13 TWRP for T225), then my best friend is always Odin and fastbootD. Don't worry about it.
abc1054 said:
Is this only for t225 ? How about t220 ? Thanks
Click to expand...
Click to collapse
I don't have T220 then can't make custom-super.tar for this device but you can uses fastbootD or fastboot mode from new TWRP.
New Competitor Alpha Droid.
CRDROID 9.4 GSI

Categories

Resources