I have been looking for most stable ROM that exist for anger aka Huawei Nexus 6p. I found on PixelBuild page storage where Pixelboot has placed (correct me if I am worng) all the Android versions for this device.
PixelBuilds - Browse /angler at SourceForge.net
Latest Android builds from PixelBoot.
sourceforge.net
I have noticed that we even get ver 12 of Android .. which is very tempting... So far I have been using PE 10 Plus , but I am facing issues with Camera and all Streaming apps (Netflix, Disney+, etc .. only F1TV works fine). This version I have been using now almost for a year and Nexus6p really goes well with it, again thnaks to Pixelboot, but issues with camera and apps have push me to look for another ROM.
Now, which in your opion is really worth to try? PE, Lineage, others ?
Thank you in advance !
btw: I have installed Lineage 18.1 and it is useless - nothing works on the phone, and it is constantly hanging down - I am not able even to connect it using USB to laptop, so I can format it... I cannot run TWRP either ...
Just stay on any android 10 Rom,best performance.
BTW,Arrow OS 10.0 is a good choice,device is passed on google play store certification.
If you want Android 11, go for asoip 11
if you want Android 10, go for PE or Arrow.
In PE10 as I wrote, there is constant issue with camera and any streaming apps do not show image (video) only audio.
Other thing, how to format and get rid of lineage 18.1?
Olaf_79 said:
In PE10 as I wrote, there is constant issue with camera and any streaming apps do not show image (video) only audio.
Other thing, how to format and get rid of lineage 18.1?
Click to expand...
Click to collapse
I meet this bug too,I have no idea why Nexus 6P which running Lineage 18.1 no way to get usb connect. Tried almost every way, no working at all. Last, I teardown my Nexus 6P, then plug it again, everything work again.
Olaf_79 said:
In PE10 as I wrote, there is constant issue with camera and any streaming apps do not show image (video) only audio.
Other thing, how to format and get rid of lineage 18.1?
Click to expand...
Click to collapse
PE does not face the camera issue, never try streaming apps. Can try when I get home.
There are no Android 11 ROM for our Nexus 6p except AOSIP 11. but it's a little bit buggy too.
HJCK said:
I meet this bug too,I have no idea why Nexus 6P which running Lineage 18.1 no way to get usb connect. Tried almost every way, no working at all. Last, I teardown my Nexus 6P, then plug it again, everything work again.
Click to expand...
Click to collapse
You can just go too bootloader screen to flash the recovery and ROM again.
Edit:wrong reply.
ryo2456 said:
You can just go too bootloader screen to flash the recovery and ROM again.
Click to expand...
Click to collapse
I have almost half of year never use my Nexus 6P,maybe some odd bug.Thanks for reply.
ryo2456 said:
You can just go too bootloader screen to flash the recovery and ROM again.
Click to expand...
Click to collapse
Thank you for the tip - it has been wipe off
OK - I mange to wipe it off now question is which ROM should I installed ?
PixelExperience_Plus_angler-10.0-20201222-1023-OFFICIAL or PixelDust-X-aosp-anger-20200416-0610 ?
Btw - when it comes to PE I am not able to locate never version , only 1023.
ryo2456 said:
PE does not face the camera issue,
Click to expand...
Click to collapse
Me on another hand constanly , I am taking 2-5 pictures, I go to see how they look like, then return to camera mode and screen is black (of the camera) I need to restart phone in order to have the camera working again ...
Olaf_79 said:
OK - I mange to wipe it off now question is which ROM should I installed ?
PixelExperience_Plus_angler-10.0-20201222-1023-OFFICIAL or PixelDust-X-aosp-anger-20200416-0610 ?
Btw - when it comes to PE I am not able to locate never version , only 1023.
Click to expand...
Click to collapse
Maybe you can try Arrow
I have installed Pixeldust ROM and looks like it is working fine. So far all works well. I even got an update, but after downloading it I have no idea where it got stored so that I could install it. Another thing is that in Play store app Netflix and HBO Max are not available fo "this device" , where Disney+ and Prime are ... Odd.
Olaf_79 said:
I have installed Pixeldust ROM and looks like it is working fine. So far all works well. I even got an update, but after downloading it I have no idea where it got stored so that I could install it. Another thing is that in Play store app Netflix and HBO Max are not available fo "this device" , where Disney+ and Prime are ... Odd.
Click to expand...
Click to collapse
Look like a out of date Fingerprint bug.Download a DevCheck for more information.
Related
LineageOS Android Distribution 14
Lineage OS Android Distribution is the continuation of the now discontinued CyanogenMod.
Instructions1. Make a Nandroid backup using TWRP or similar custom recovery if flashing from a different ROM.
2. Download the latest LineageOS ROM (uploading) and copy it to either the internal storage, an SD card, or an OTG usb drive.
3. Download a Nougat (7.1) Google Apps Package (GApps) for ARM devices if desired (OpenGApps recommended).
4. Boot into the custom recovery to flash the ROM and/or GApps .
5. Factory reset if flashing from a different ROM.
XDA:DevDB Information
Unofficial LineageOS, ROM for the Sprint HTC EVO 4G LTE
Contributors
Source Code: https://github.com/LineageOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: HBOOT 2.10.0000 or 2.10.5555
Version Information
Status: Testing
Current Beta Version: lineage-14.1-20170302
Beta Release Date: 2017-03-02
Created 2017-01-22
Last Updated 2017-03-02
I'm going find this phone in one of the shoe box and install this thank you kind sir
Wow Los has finally arrived for the Jewel but my Jewel is no longer with me
I can't seems to use external sdcard as internal there's simply no option to do it while formatting. Other then this it's pretty snappy thanks again.
mecha2012 said:
I can't seems to use external sdcard as internal there's simply no option to do it while formatting. Other then this it's pretty snappy thanks again.
Click to expand...
Click to collapse
Thanks for testing! Try the new Nougat build—I wasn't able to move apps onto the SD card (that is a LineageOS bug), but I was able to format it as internal storage.
I couldn't install the latest build 14.1 well just keeps bootlooping at the HTC screen.
Wipe
Install latest build
Install Gapps 7.1 (tried without installing this also) still no go ?
mecha2012 said:
I couldn't install the latest build 14.1 well just keeps bootlooping at the HTC screen.
Wipe
Install latest build
Install Gapps 7.1 (tried without installing this also) still no go
Click to expand...
Click to collapse
There appears to be an error in the build. I will upload a new build within a day.
Edit: New build has been uploaded! Please report if it works.
Never thought my Jewel would ever see Nougat (let alone Lollipop or Marshmallow). Just flashed and all is working well so far. Awesome work!
God tier work here, I'm blown away. I misplaced my Moto G 3rd gen somewhere in my apartment, so I've given up and dusted off my Evo. I was set to just use the Viper 4.1.1 that was on there, but some apps weren't installing so I came on ol' XDA. This is much more than I expected, thank you.
With that said, any tips on getting this to activate on Sprint / Ting? It was working fine on the old rom, but not kicking in here.
I know this isn't totally related to this ROM, but maybe it can be. I'm having issue with this (and most other ROMs I try) where the per button works physically, but only the buttons light up. I have to press the power button several times to get the screen to wake. This isn't consistent though. Seems worse if the screen has been off for a while. Does anyone know of a fix, and if so, can it be incorporated into this ROM? I know there have other threads about this but it seems like they have been dropped.
idumych said:
God tier work here, I'm blown away. I misplaced my Moto G 3rd gen somewhere in my apartment, so I've given up and dusted off my Evo. I was set to just use the Viper 4.1.1 that was on there, but some apps weren't installing so I came on ol' XDA. This is much more than I expected, thank you.
With that said, any tips on getting this to activate on Sprint / Ting? It was working fine on the old rom, but not kicking in here.
Click to expand...
Click to collapse
I believe that the service must be activated on a stock ROM before flashing a custom ROM. Then, the correct APN has to be set according to the carrier under Settings > More > Cellular networks > Access Point Names.
Schiben said:
I know this isn't totally related to this ROM, but maybe it can be. I'm having issue with this (and most other ROMs I try) where the per button works physically, but only the buttons light up. I have to press the power button several times to get the screen to wake. This isn't consistent though. Seems worse if the screen has been off for a while. Does anyone know of a fix, and if so, can it be incorporated into this ROM? I know there have other threads about this but it seems like they have been dropped.
Click to expand...
Click to collapse
I am not sure of a fix, and I have not encountered this issue, but have you tried enabling Wake device using the Camera button under Settings > Buttons?
VitaTaf said:
I am not sure of a fix, and I have not encountered this issue, but have you tried enabling Wake device using the Camera button under Settings > Buttons?
Click to expand...
Click to collapse
I've tried that in the past. Forgot about it this time around. Tried it again and it seems to be about the same as the actual power button for getting the screen to come on correctly.
Good ol' Jewel. Is this rom working ok?
My wife is temporarily using my old Jewel because she dropped & broke her crappy samsung phone. can someone please tell me how this rom is working?
I appreciate your time!
King of the Couch said:
My wife is temporarily using my old Jewel because she dropped & broke her crappy samsung phone. can someone please tell me how this rom is working?
I appreciate your time!
Click to expand...
Click to collapse
The ROM is working fine for the most part. The battery is not great, but that may be due to the battery's age. Additionally, there is a bug with BoringSSL that sometimes prevents the Play Store or Gmail from working temporarily.
sounds good. yeah, I'm sure it's age. thanks man. take care-
Trouble with WiFi
Did a Full factory reset, installed rom, gapps, and supersu from TWRP, factory wipe again from TWRP; now the OS is installed and running but after connecting to my home network, says no internet access although the netork is up and running normally, all other devices connected. Any thoughts or suggestions. I have a backup of my previous state, so I can revert, but would like to keep this on 7.1 for consistency between this and my primary device. The primary use for this device is media streaming.
keysneptune said:
Did a Full factory reset, installed rom, gapps, and supersu from TWRP, factory wipe again from TWRP; now the OS is installed and running but after connecting to my home network, says no internet access although the netork is up and running normally, all other devices connected. Any thoughts or suggestions. I have a backup of my previous state, so I can revert, but would like to keep this on 7.1 for consistency between this and my primary device. The primary use for this device is media streaming.
Click to expand...
Click to collapse
I believe that the WiFi issue have been fixed in the latest build (20170522).
Thank you for this rom!
I had been using cyanogenmod 5.0 and dirtyunicorns 5.1 both were solid roms. Unfortunately the latest apps seem to run a bit slow on them. I thought it was the device but after installing this rom everything is snappy! It manages 1gig of ram better than any other rom and that 1.5ghz dualcore still runs strong. Snapchat is way more responsive on this rom, instagram and fb run without problems. GPS, 4g, sms, wifi, camera, sd storage, everything works! I've only noticed a few bugs. The wifi activity arrows don't show when something is downloading/uploading but wifi itself does work. Also, even tho I have working active cell service, it tries to activate itself again everytime I reboot and fails but calls-sms-data continue to work lol. The biggest bug is that auto-rotation stops working after 30-60 minutes and it stays stuck on portrait mode. Nothing but a full reboot will get it working again, a quick softboot won't fix it. I've tried changing the rotation settings and also added some lines to the build.prop but no solution thus far. I love this rom so much, if it's not fixed I might try some auto rotation apps. One last thing, it would be cool if the # in the status bar would go away after I close whatever app has root. The previous rom I had did that. Thank you so much to all the developers for bringing life to this phone!
familyjewels said:
I had been using cyanogenmod 5.0 and dirtyunicorns 5.1 both were solid roms. Unfortunately the latest apps seem to run a bit slow on them. I thought it was the device but after installing this rom everything is snappy! It manages 1gig of ram better than any other rom and that 1.5ghz dualcore still runs strong. Snapchat is way more responsive on this rom, instagram and fb run without problems. GPS, 4g, sms, wifi, camera, sd storage, everything works! I've only noticed a few bugs. The wifi activity arrows don't show when something is downloading/uploading but wifi itself does work. Also, even tho I have working active cell service, it tries to activate itself again everytime I reboot and fails but calls-sms-data continue to work lol. The biggest bug is that auto-rotation stops working after 30-60 minutes and it stays stuck on portrait mode. Nothing but a full reboot will get it working again, a quick softboot won't fix it. I've tried changing the rotation settings and also added some lines to the build.prop but no solution thus far. I love this rom so much, if it's not fixed I might try some auto rotation apps. One last thing, it would be cool if the # in the status bar would go away after I close whatever app has root. The previous rom I had did that. Thank you so much to all the developers for bringing life to this phone!
Click to expand...
Click to collapse
Thanks for trying out the ROM! The WiFi activity arrows are intentionally disable on LineageOS. I do not currently have an active cell service on this device, so I am unable to fix the activation bug for now. Could you flash the patch below in recovery and test if autorotation is working properly? It should also enable the option to hide the Superuser icon under "Status bar" > "System icons".
Hi all
I am trying to upgrade a Lenovo Tab 3 (TB3-710F) 7" tablet because Android 5 is the latest official version. Ideally, 7 is better, but I will be happy with 6. I have downloaded SP Flash Tool and TWRP 3.0.2, and that is installed correctly and all working. Now the actual ROM is the problem. I have downloaded Resurrection Remix, LineageOS 13, Viper and Dot, and it would appear most of them have the same problem. When I try to install the zip file, I get told that it's unable to unmount or mount /system and it crashes out with signal 11. I have tried to wipe and reformat the system folder, again being told it's unable to unmount /system, and have changed the file system from NTFS or exFAT and back to Ext4, but to no avail. I suspect until I can format the system folder correctly, it won't install, but for the sake of me, I can't. Has anyone got any advice?
bump
A custom rom would be great for the tb3-710f.
I have just done a factory reset and most Google apps won't run because play services can't update.
bump
I've just upgraded to 5.1.1 on a TB3-710F using an old CyanogenMod cm-12 custom rom so that I can use Google's FamilyLink, works well.
Do you have a link to the LineageOS 13 rom?
I also had a similar error installing the cm-12 rom but that was because I'd missed wiping /data in TWRP first before attempting to install the rom.
YESS>>> We need lineage os for TB 3-710f.. I too use cm12
SOOOO.... Anyone??
I too have CM-12 on my Lenovo. so anywhere have a link to download any custom ROM but not CM-12.
let me explain, firstly
rikaitch said:
Hi all
I am trying to upgrade a Lenovo Tab 3 (TB3-710F) 7" tablet because Android 5 is the latest official version. Ideally, 7 is better, but I will be happy with 6. I have downloaded SP Flash Tool and TWRP 3.0.2, and that is installed correctly and all working. Now the actual ROM is the problem. I have downloaded Resurrection Remix, LineageOS 13, Viper and Dot, and it would appear most of them have the same problem. When I try to install the zip file, I get told that it's unable to unmount or mount /system and it crashes out with signal 11. I have tried to wipe and reformat the system folder, again being told it's unable to unmount /system, and have changed the file system from NTFS or exFAT and back to Ext4, but to no avail. I suspect until I can format the system folder correctly, it won't install, but for the sake of me, I can't. Has anyone got any advice?
Click to expand...
Click to collapse
because all of those ROMs are not compatible with your device. that is why it won't flash. If you force it to install that specific ROM, it might end up in a boot loop. You must have not deleted all your files. :c
shiznix said:
I've just upgraded to 5.1.1 on a TB3-710F using an old CyanogenMod cm-12 custom rom so that I can use Google's FamilyLink, works well.
Do you have a link to the LineageOS 13 rom?
I also had a similar error installing the cm-12 rom but that was because I'd missed wiping /data in TWRP first before attempting to install the rom.
Click to expand...
Click to collapse
You did not upgrade though. The tablet is literally on 5.1.1 so maybe you did this because you hate the lag of its own UI provided by Lenovo. Well that is a good choice. Although, it does not make any difference between the apps that you can run and can't run because it is still in the same version (Android 5.1.1).
To be honest, even if you try to find a Lineage OS ROM, it is useless because it is not on the list of supported devices. Almost all custom ROMs do not have this tablet on their list (I hope they added and modify some **** because we really need it :c). For now, the only custom ROM that I know this tablet can have is Cyanogenmod 12. It is your own choice if you want to install the buggy ones. The buggy ones are, Lineage OS and Flyme OS.
here is the link: https://forum.xda-developers.com/t/lenovo-tab-3-7-tb3-730x-custom-roms-custom-recoveries.3623506/
Lineage OS problems :
1=SOUND WITH WHITE NOISE
2=CAMERA CANT CONNECT
3=NO IN CALL SOUND, UNLESS LOUD SPEAKER
1=FIXED WHITE NOISE- sound working perfectly
****BUG REMAINING =CAMERA CANT CONNECT
=NO IN CALL SOUND, UNLESS LOUD SPEAKER- *calls unless loudspeaker
Flyme OS problems :
1= NO SIM
2= CAMERA CANT CONNECT
3=NO SOUND
1=FIXED NO SIM-working perfectly
2=FIXED NO SOUND-working perfectly
****BUG REMAINING =CAMERA CANT CONNECT
SoIomon said:
You did not upgrade though. The tablet is literally on 5.1.1 so maybe you did this because you hate the lag of its own UI provided by Lenovo. Well that is a good choice. Although, it does not make any difference between the apps that you can run and can't run because it is still in the same version (Android 5.1.1).
To be honest, even if you try to find a Lineage OS ROM, it is useless because it is not on the list of supported devices. Almost all custom ROMs do not have this tablet on their list (I hope they added and modify some **** because we really need it :c). For now, the only custom ROM that I know this tablet can have is Cyanogenmod 12. It is your own choice if you want to install the buggy ones. The buggy ones are, Lineage OS and Flyme OS.
here is the link: https://forum.xda-developers.com/t/lenovo-tab-3-7-tb3-730x-custom-roms-custom-recoveries.3623506/
Lineage OS problems :
1=SOUND WITH WHITE NOISE
2=CAMERA CANT CONNECT
3=NO IN CALL SOUND, UNLESS LOUD SPEAKER
1=FIXED WHITE NOISE- sound working perfectly
****BUG REMAINING =CAMERA CANT CONNECT
=NO IN CALL SOUND, UNLESS LOUD SPEAKER- *calls unless loudspeaker
Flyme OS problems :
1= NO SIM
2= CAMERA CANT CONNECT
3=NO SOUND
1=FIXED NO SIM-working perfectly
2=FIXED NO SOUND-working perfectly
****BUG REMAINING =CAMERA CANT CONNECT
Click to expand...
Click to collapse
These ROM's don't work for the 710f.
meekspace said:
These ROM's don't work for the 710f.
Click to expand...
Click to collapse
I installed it myself so...
SoIomon said:
I installed it myself so...
Click to expand...
Click to collapse
I must have been having a bad day. I got CM running.
I will have to try these two again. Don't know what I would have done wrong...
SoIomon said:
I installed it myself so...
Click to expand...
Click to collapse
Lineage and Flyme doesn't install for me.
Did a clean install with the stock TB3-710F_S000028_170316_ROW. Then format. Then tried to install the two ROM's.
I noticed the install log shows the variant 710X. My tablet is a 710F
What am I doing wrong?
meekspace said:
Lineage and Flyme doesn't install for me.
Did a clean install with the stock TB3-710F_S000028_170316_ROW. Then format. Then tried to install the two ROM's.
I noticed the install log shows the variant 710X. My tablet is a 710F
What am I doing wrong?
Click to expand...
Click to collapse
nvm. Do not risk it. I installed CyanogenMod not those two. Sorry for misinformation.
SoIomon said:
nvm. Do not risk it. I installed CyanogenMod not those two. Sorry for misinformation.
Click to expand...
Click to collapse
No problem.
I'm struggling with CyanogenMod running super slow and freezing regularly. I have found two links. Using SP Flash Tool, I first flash stock TB3-710F_S000028_170316_ROW and then recovery_twrp302_Lenovo_TB3-710F
Then I flash these ROM's. One that a time
LENOVO TB3-710F - Google Drive
drive.google.com
TB3_710F - Google Drive
drive.google.com
Super sloooow...
What am I missing?
meekspace said:
No problem.
I'm struggling with CyanogenMod running super slow and freezing regularly. I have found two links. Using SP Flash Tool, I first flash stock TB3-710F_S000028_170316_ROW and then recovery_twrp302_Lenovo_TB3-710F
Then I flash these ROM's. One that a time
LENOVO TB3-710F - Google Drive
drive.google.com
TB3_710F - Google Drive
drive.google.com
Super sloooow...
What am I missing?
Click to expand...
Click to collapse
Hello, was the last stock rom very slow too? Might be Google services that make the device lag
meekspace said:
No problem.
I'm struggling with CyanogenMod running super slow and freezing regularly. I have found two links. Using SP Flash Tool, I first flash stock TB3-710F_S000028_170316_ROW and then recovery_twrp302_Lenovo_TB3-710F
Then I flash these ROM's. One that a time
LENOVO TB3-710F - Google Drive
drive.google.com
TB3_710F - Google Drive
drive.google.com
Super sloooow...
What am I missing?
Click to expand...
Click to collapse
clear cache in TWRP.
Djiban said:
Hello, was the last stock rom very slow too? Might be Google services that make the device lag
Click to expand...
Click to collapse
No, stock is ok.
Are their any projects related to the Oukitel K9 phone? I purchased one and use it on the AT&T network here in the USA.
The phone is decent but the built in Android is very generic and buggy.
I would love to unlock the potential of this phone with a custom ROM.
Let me know if this isn't the right place to ask and point me in the right direction!
Lannie
No custom roms at this time, why bother when you can custom Android 9 using Magisk , Xposed and Substratum. Although having a Lineage 17 would be nice.
I ask because the Android on this phone is so buggy and lacking features. I don't see how the options you gave will add features I need. They might as I'm new to these apps and don't know much about them.
lschafroth2 said:
I ask because the Android on this phone is so buggy and lacking features. I don't see how the options you gave will add features I need. They might as I'm new to these apps and don't know much about them.
Click to expand...
Click to collapse
If you private message me I cannot get to the messages here. If I click on messages it takes me to the register or reset password every time. I have no way to read them.
At this point it's useless to try since the mediatek drivers no longer work on Windows 10. Not a single guide on installing on Windows 10 64 bit work anymore. If anyone knows how to get the Oukitel drivers to work, let me know. No amount of driver sign or advanced boot works. Every time I plug in the phone it says the previous device malfunctioned.
It worked once and I have never connected the phone since. Will not work.
lschafroth2 said:
At this point it's useless to try since the mediatek drivers no longer work on Windows 10. Not a single guide on installing on Windows 10 64 bit work anymore. If anyone knows how to get the Oukitel drivers to work, let me know. No amount of driver sign or advanced boot works. Every time I plug in the phone it says the previous device malfunctioned.
It worked once and I have never connected the phone since. Will not work.
Click to expand...
Click to collapse
This might seem obvious, but could never get my PC (Windows10 64bit) to even recognize my Oukitel K9 until I (out of desperation, and to try to prove a point to someone) reinstalled Minimal ADB & Fastboot 1.4.3 from here:
https://androidmtk.com/download-minimal-adb-and-fastboot-tool
It's the same thing I had previously installed, and I didn't expect it to suddenly/miraculously start working, but it did.
I'll pm you.
lschafroth2 said:
Are their any projects related to the Oukitel K9 phone? I purchased one and use it on the AT&T network here in the USA.
The phone is decent but the built in Android is very generic and buggy.
I would love to unlock the potential of this phone with a custom ROM.
Let me know if this isn't the right place to ask and point me in the right direction!
Lannie
Click to expand...
Click to collapse
Best rom floss october edition with buildprop tweaks transformed this phone into next level. Thanks to phherguson
nation888888 said:
Best rom floss october edition with buildprop tweaks transformed this phone into next level. Thanks to phherguson
Click to expand...
Click to collapse
Thanks, but I sold this phone and went to a Pixel 4 XL. I needed something reliable and InTune refused to work on the old Oukitel.
Has anyone worked out ramdisk partition for Magisk?
Discovery,
Thanks to Phh has developed the perfect ROM for the Oukitel K9. Strangely I have had to try many ROMs to find the perfect one. The Lineage ROM; I had GPS issues, the Recent app button not working, and signal loss. Wanted the latest OS and this one is the winner below.
https://github.com/phhusson/treble_experimentations/releases/download/v400.e/system-squeak-arm64-ab-vndklite-gapps-secure.img.xz
Llevo un par de semanas probando la rom y no funciona el detector de huellas,se puede mejorar?hay alguna rom(Android 12) mas estable y que todo funcione?,gracias
MOD Edit: I've been testing the rom for a couple of weeks and the fingerprint sensor doesn't work, can it be improved? Is there a more stable rom (Android 12) that makes everything work? Thanks
Try the updated version https://github.com/phhusson/treble_experimentations/releases/tag/v402
Should resolve the fingerprint issue. I have also tried the AOSP 12.1 v410 and the result is the phone goes into a boot loop. Not sure why when the previous version installs so easily. I have built a custom TWRP 3.6.1 and will be trying it soon. The reason why we need to update; that the TWRP 3.3.1 version is limited and could be the reason why there are install issues with some GSIs out there. The encryption keeps reactivating even if I use scripts, flash no verify-verity. Hopefully, this will work. I'm enjoying the new version too much to start again I will keep you posted.
This one is supreme V411 and distracts me away from my Note 20 Ultra. https://github.com/phhusson/treble_experimentations/releases/tag/v411 .Works well with the Oukitel K9, recommend to use swapram module for boosting memory 4gb to 8gb. Searching for a working TWRP 3.6.
nation888888 said:
This one is supreme V411 and distracts me away from my Note 20 Ultra. https://github.com/phhusson/treble_experimentations/releases/tag/v411 .Works well with the Oukitel K9, recommend to use swapram module for boosting memory 4gb to 8gb. Searching for a working TWRP 3.6.
Click to expand...
Click to collapse
Have you found better rom for k9? I've used several gsi images but system is very laggy. Yet to find a good fast custom rom for k9.
[email protected]@ said:
Have you found better rom for k9? I've used several gsi images but system is very laggy. Yet to find a good fast custom rom for k9.
Click to expand...
Click to collapse
I found this one is the best;
https://www.mediafire.com/file/74b5bgfu0vsjcvg/CherishOS_A13-arm64-bgS-slim_20221121.img.xz/file
nation888888 said:
I found this one is the best;
https://www.mediafire.com/file/74b5bgfu0vsjcvg/CherishOS_A13-arm64-bgS-slim_20221121.img.xz/file
Click to expand...
Click to collapse
Thanks a lot. I will give it a try!
nation888888 said:
I found this one is the best;
https://www.mediafire.com/file/74b5bgfu0vsjcvg/CherishOS_A13-arm64-bgS-slim_20221121.img.xz/file
Click to expand...
Click to collapse
I've flashed this one and found it is as laggy as CrDroid. I thought it might be due to not wiping data before flashing. Decided to reboot to recovery to wipe data. And.. phone stuck at twrp logo. No go further. Do you have any better TWRP than mine 3.3.1?
Try using the "Yet another Kernel Tweaker" module in Magisk. Through all my searches I could only find the TWRP 3.3.1. Tried building using kitchen but failed. Sometimes the TWRP will take up to 5 to 10 minutes, remember it is trying to decrypt. If it takes longer then SPflash, assuming done correctly with vbmeta. After the initial install the updates and synchronization starts processing. This causes a slow-down. I thought the same. Leave the device for a day to update and synchronize then should be faster.
nation888888 said:
Try using the "Yet another Kernel Tweaker" module in Magisk. Through all my searches I could only find the TWRP 3.3.1. Tried building using kitchen but failed. Sometimes the TWRP will take up to 5 to 10 minutes, remember it is trying to decrypt. If it takes longer then SPflash, assuming done correctly with vbmeta. After the initial install the updates and synchronization starts processing. This causes a slow-down. I thought the same. Leave the device for a day to update and synchronize then should be faster.
Click to expand...
Click to collapse
TWRP logo is for hours here.
Now I can't even enter fastboot after I've chosen reboot to recovery from cherishos power menu.
I hit volup+pwr and boot menu doesn't even show up. Tried 20+ times already.
I'm stuck. The last hope is to wait for it to discharge on twrp logo and try my luck with fastboot menu again.
Otherwise I have no idea. Now I question myself why on Earth I would even try to better something that works at least average ))))
nation888888 said:
Try using the "Yet another Kernel Tweaker" module in Magisk. Through all my searches I could only find the TWRP 3.3.1. Tried building using kitchen but failed. Sometimes the TWRP will take up to 5 to 10 minutes, remember it is trying to decrypt. If it takes longer then SPflash, assuming done correctly with vbmeta. After the initial install the updates and synchronization starts processing. This causes a slow-down. I thought the same. Leave the device for a day to update and synchronize then should be faster.
Click to expand...
Click to collapse
I've managed to revive it. But still on cherishos and few other A13 roms screen is flickering. Have you got something like that?
There is Android 11 ROM for Xperia Tablet Z4.
It's quite stable.
Kernel sources
What doesn't work:
- when the tablet is off, during charging, the diode will always light red;
- external SD Card as internal storage;
- restart into recovery;
- tablet encryption;
- SELinux proper configuration for a proper security.
How to install:
1) use TWRP 3.5.0.
2) do factory reset (wipe)
3) Flash the firmware, nik,bit or flamegapps , magisk 21 and that’s it.
Change log:
20201206- initial build.
Last builds (mirror) are here.
Sabar_op link
We must be infinite grateful to sabar_op for his hard work in development of this rom and Bernie and Tarkzim who help to update kernel for kitakami devices. :good:.
I found that I cant install vanced YouTube with lucky patcher or SAI, with vanced manager it's OK. But root version says google services is not supported on this device. I checked with both bit and nik gapps, but no luck. Anyway to use root version with los 18?
Update new rom dated on 11 Dec 2020 :
- camera now works
- fix some sepolicy denials.
I found that "reboot to recovery" doesn't work. Only Power + -val is only way to get the recovery.
Thanks for the R version for our device.
I found an issue on play store. I can't download some games (like Walking Dead Road to survival for example). When install begin it stop and an error appears.
lvtz said:
Thanks for the R version for our device.
I found an issue on play store. I can't download some games (like Walking Dead Road to survival for example). When install begin it stop and an error appears.
Click to expand...
Click to collapse
Send me the log pls..
sabar_op said:
Send me the log pls..
Click to expand...
Click to collapse
I already came back on Android 10 to install games. Try on your side if you can with the game mentionned above please.
alex009988 said:
I found that "reboot to recovery" doesn't work. Only Power + -val is only way to get the recovery.
Click to expand...
Click to collapse
Thanks for the report. Not sure why like that, perhaps due to LOS18 is still beta?
sabar_op said:
Thanks for the report. Not sure why like that, perhaps due to LOS18 is still beta?
Click to expand...
Click to collapse
Best ROM for the best Android tablet. Thanks for your work.
lvtz said:
Thanks for the R version for our device.
I found an issue on play store. I can't download some games (like Walking Dead Road to survival for example). When install begin it stop and an error appears.
Click to expand...
Click to collapse
The same thing with war robots.
Battery consumption on karen-windy is huge as always on this. The android system itself lost 46% in 12 hours idle.
frode_ said:
Battery consumption on karen-windy is huge as always on this. The android system itself lost 46% in 12 hours idle.
Click to expand...
Click to collapse
True. Battery drains to 0% when leaving the device switched off or on! Red LED stays on even when device switched off..
Any fix available or updated builds?
else need to revert back to stock...
rb69 said:
Any fix available or updated builds?
Click to expand...
Click to collapse
Sabar made Los18.1 build which should reduce battery consumtion. But it also brings new bugs, no exfat for sdcard, half of screen is disabled after wakeup in many cases. I hope it'll be fixed soon.
Half black screen bug is fixed with 20200103 rom. You may need also to reformat sdcard as external storage.
How's the battery consumption?
jelbo said:
How's the battery consumption?
Click to expand...
Click to collapse
I remember los15 and 17 had serious problem with battery consumption so it was hard to use, now it's better. I use now aicp 16 but I was using stock marshmallow 32.2.A.5.11 several days ago. The stock is amazing, fast, no kernel panics, bugs at all. But I had a battery life there only for one day even with stock, as I have it with custom los14. So los14 maybe is more battery consuming a little bit. But don't except that android 11 is less buggy and battery consuming than los14.
As far as I tested android 11 it's more or less OK, even for now it can be used for daily usage. But it will likely to be a bit worse than los14 according to battery life. I think you can backup the stock with twrp 3.4.0 and try android 11. If it's not OK for you, you can easily restore the stock by twrp.
alex009988 said:
I remember los15 and 17 had serious problem with battery consumption so it was hard to use, now it's better. I use now aicp 16 but I was using stock marshmallow 32.2.A.5.11 several days ago. The stock is amazing, fast, no kernel panics, bugs at all. But I had a battery life there only for one day even with stock, as I have it with custom los14. So los14 maybe is more battery consuming a little bit. But don't except that android 11 is less buggy and battery consuming than los14.
As far as I tested android 11 it's more or less OK, even for now it can be used for daily usage. But it will likely to be a bit worse than los14 according to battery life. I think you can backup the stock with twrp 3.4.0 and try android 11. If it's not OK for you, you can easily restore the stock by twrp.
Click to expand...
Click to collapse
Do you use this marshmallow firmware with AICP 16 and LOS 18 ? If no, which one ?
And what about kernel panics, reboots and some games impossible to install on play store on your side on LOS 18 ?
lvtz said:
Do you use this marshmallow firmware with AICP 16 and LOS 18 ? If no, which one ?
And what about kernel panics, reboots and some games impossible to install on play store on your side on LOS 18 ?
Click to expand...
Click to collapse
I haven't used stock for years, but some days I've gone back to it just to see and find out what about root here. The last nougat there has no way to get the root, so I've downgraded to marchmallow. I also uploaded some stock ftp to my cloud.
Now I used aicp. Kernel panic are possible here but over two days I havent faced a one.
And yes, big games like war robots and call of duty are impossible to install with all nik, bit and flame gapps. There is some storage permission problem even though that I gave the neccesary ones. But you can find the games on 4pda.ru download and install them. The other bug is that vanced root YouTube doesn't work with all three gapps too. Maybe the reason of two problems there is still no opengapps for android 11.
I found some info about YouTube bug https://github.com/YTVanced/Vanced/issues/201
There is the error when downloading war robots.
01-07 18:15:19.260 E/Finsky:download_service(10456): java.io.IOException: Can't create file:///storage/emulated/0/Android/obb/com.android.vending/com.pixonic.wwr/temp.main.106419.com.pixonic.wwr.obb
So I decided to check storage/emulated/0. I tried ES file manager and root explorer. And find that emulated folder is empty. But it should be not. Maybe be its a clue.
Build in the works. Going to release the BETA as soon as I can do testing on my own device before release.
IMO this is a necessity as there are literally no good roms for this right now. I tried the port of the Nexus stock CR rom and it was not great. Playstore was unusable due to an issue were the app thinks the system is out of storage space, even though it is almost empty. Chrome crashes instantly, the search on the page home screen flickers up/down without control.
I am a far bigger fan of LineageOS thus why I am working on this build.
More to come.
SniperFox22 said:
Build in the works. Going to release the BETA as soon as I can do testing on my own device before release.
IMO this is a necessity as there are literally no good roms for this right now. I tried the port of the Nexus stock CR rom and it was not great. Playstore was unusable due to an issue were the app thinks the system is out of storage space, even though it is almost empty. Chrome crashes instantly, the search on the page home screen flickers up/down without control.
I am a far bigger fan of LineageOS thus why I am working on this build.
More to come.
Click to expand...
Click to collapse
YES! Thank you very much for supporting this tablet!
SniperFox22 said:
Build in the works. Going to release the BETA as soon as I can do testing on my own device before release.
IMO this is a necessity as there are literally no good roms for this right now. I tried the port of the Nexus stock CR rom and it was not great. Playstore was unusable due to an issue were the app thinks the system is out of storage space, even though it is almost empty. Chrome crashes instantly, the search on the page home screen flickers up/down without control.
I am a far bigger fan of LineageOS thus why I am working on this build.
More to come.
Click to expand...
Click to collapse
As a follow up to my original post I wanted to mention that for anyone who wants a new ROM on their SM-T290 until this is finished development, use the Nexus Rom by Magendanz. I was able to do a fresh stock firmware install and retry the rom and my opinion has changed. I have noticed that these Tab A 8.0 tablets have been used a lot for like Uber/Door Dash and other POS terminals. I am pretty sure a lot of them have modified or customized firmware for these reasons and when I mine second hand it was from a pizza store. I think that messed up the upgrade.
Overall Magendanz did a great job, when you install it properly. I have zero issues with functionality now, TWRP recovery set up, as well as Magisk installed and everything is running extremely well.
As far as instruction on how to install. Take a look at some of the comments further down on the Nexus thread. That is what I did this time around and it worked perfectly. Last thing I did was copy Magisk.Apk to my SD, change extension from .APK to .ZIP, then boot into TWRP and install that ZIP.
Going to update progression on a monthly basis as far as the LineageOS 18.0 build
SniperFox22 said:
Build in the works. Going to release the BETA as soon as I can do testing on my own device before release.
Click to expand...
Click to collapse
Do you have a github with your source code and manifest? I just got this tablet (used) yesterday and I would like to see if I can help. I have built LineageOS roms for a number of older Samsung Tab A devices, but will have to do some research on the "new to me" T290. Thanks.
Just got this tablet, how's the beta coming along? And what can I do to help?
Thank you my guy I had lost all hope for custom roms on this tablet. It's quite relieving to know that I'm not alone.
Also, has anyone experienced severe lag on one ui 3 while doing basic tasks? The thing literally gets 5 fps while watching youtube and surfing the web but it plays 3d games at 20 fps on low settings. wtf
HaveSomeRubicon said:
Thank you my guy I had lost all hope for custom roms on this tablet. It's quite relieving to know that I'm not alone.
Click to expand...
Click to collapse
Hey Guys,
I didnt end up building a custom rom, because I was able to get the GSI version of Lineage 19 working fairly easily. Just use the correct image and flash the same as the Nexus post. Android 12 with Lineage 19 so i felt it wasnt worth it as everything works. I had trouble at first with a boot loop but that was because I had installed Magisk BEFORE the GSI rom and not AFTER. So dont make my mistake.
As per the Nexus Post;
Unlock Bootloader
flash TWRP
Wipe data
Install Andy Yan's Lineage OS 19 GSI
Andy Yan's personal builds // GSI - Browse /lineage-19.x at SourceForge.net
sourceforge.net
Install Magisk
Reboot
Cheers!
SniperFox
SniperFox22 said:
Hey Guys,
I didnt end up building a custom rom, because I was able to get the GSI version of Lineage 19 working fairly easily. Just use the correct image and flash the same as the Nexus post. Android 12 with Lineage 19 so i felt it wasnt worth it as everything works. I had trouble at first with a boot loop but that was because I had installed Magisk BEFORE the GSI rom and not AFTER. So dont make my mistake.
...
SniperFox
Click to expand...
Click to collapse
Good advice But which of Andy's GSIs did you use exactly ?
Thanks so much dude
The GSI is a .img.xz will it work or does it need to be .gsi
HaveSomeRubicon said:
The GSI is a .img.xz will it work or does it need to be .gsi
Click to expand...
Click to collapse
You download the .img.xz file and unzip it.
Inside this will be the .img file
This is what you need to flash (.img)
2faraway2 said:
Good advice But which of Andy's GSIs did you use exactly ?
Click to expand...
Click to collapse
Sorry
Use this one
lineage-19.0-20220211-UNOFFICIAL-treble_arm64_bgS.img.xz
It has Gapps built in as well as super user through SSH, dont install Magisk as it will error that there is already SU tool installed.
@SniperFox22 , did you make a github for the code or didn't even start since you are happy with GSI?
SniperFox22 said:
You download the .img.xz file and unzip it.
Inside this will be the .img file
This is what you need to flash (.img)
Sorry
Use this one
lineage-19.0-20220211-UNOFFICIAL-treble_arm64_bgS.img.xz
It has Gapps built in as well as super user through SSH, dont install Magisk as it will error that there is already SU tool installed.
Click to expand...
Click to collapse
My OS didn't have an option to unzip it at first glance. I haven't been able to install gapps so I'm gonna try that gsi. Also, am I supposed to wipe internal storage before flashing or not?
I got it working but games just crash which is worse than before
Came across this while trying to root my sm-t290. Just want to add that Andy Yan has upgraded to a 19.1 version that appears to work just fine. Flashed to system partition using twrp after I had flashed the Nexus rom. Wifi works, sound works, sd card, bluetooth keyboard works just fine.
SunSlide said:
Came across this while trying to root my sm-t290. Just want to add that Andy Yan has upgraded to a 19.1 version that appears to work just fine. Flashed to system partition using twrp after I had flashed the Nexus rom. Wifi works, sound works, sd card, bluetooth keyboard works just fine.
Click to expand...
Click to collapse
Link to it???
I like the link above because it has all the versions but lineage-19.1-20220320-UNOFFICIAL-arm64_bgS.img.xz is the one that I used. The page has the naming convention. Ill mention that even though it says that it's supposed to be rooted, I couldn't get it to work right. The nexus rom had an option in the 'phh treble' menu to activate root and this lineage image should also but the option wasn't there. It kept saying the supersu binary was busy but that was after I flashed a supersu.zip(it may have worked before then i don't know). I played with it a little bit but ended up just flashing back to the Nexus rom.
Hey guys!
Installed "lineage-19.1-20220320-UNOFFICIAL-arm64_bgS.img"
Everything starts up, but something is weird with my installation and my storage, it freezes when i go into storage and i cant download anything without apps start to crash.
Im not sure if i flashed it correctly, i did a wipe in TWRP before installation.
Really hope i can get this to work since it waaaaay faster then the bloat samsung ships
Edit:
Tried flashing another rom (nexus) and had the same issue!
trying to reflash and wipe everything except internal storage.
Where should i flash image? i get: "select partition to flash image", never seen that before (might be because you flash img and not zip)
SniperFox22 said:
Hey Guys,
I didnt end up building a custom rom, because I was able to get the GSI version of Lineage 19 working fairly easily. Just use the correct image and flash the same as the Nexus post. Android 12 with Lineage 19 so i felt it wasnt worth it as everything works. I had trouble at first with a boot loop but that was because I had installed Magisk BEFORE the GSI rom and not AFTER. So dont make my mistake.
As per the Nexus Post;
Unlock Bootloader
flash TWRP
Wipe data
Install Andy Yan's Lineage OS 19 GSI
Andy Yan's personal builds // GSI - Browse /lineage-19.x at SourceForge.net
sourceforge.net
Install Magisk
Reboot
Cheers!
SniperFox
Click to expand...
Click to collapse
Hi Sniperfox,
could you please provide a link to the correct Nexus post, I would like to make sure i follow the correct one as I have a tab A (2019) and want to nstall lineage.
thanks in advance
rgds Acsum