!!!WARRNING
**High risk for update (GSI system + magisk) bypass flash back to Stock ROM . May trip Knox to UNKNow state, such as
KG 'Broken'New GSI Release ( Unstable build )✓ DOWNLOAD New archive GSI (system.img) :- https://xiaomemeindex.com/treble/?dir=Superior/13/20221003_b2
✓Making new CustomAP framework for Odin .(from new GSI system.img)Note| We don't have TWRP and Fastboot mode. then use method " flashing with odin."
my tutorial step by step
CustomAP 2022
The only way to get away from the official firmware. Changes Degoogle (LeOS-TD.2.0 ) A13 GSI Home Launcher For SM-T225 FastbootD ☆☆☆ Tips and Tricks For [ LOS TD Unofficial GSI ] latest 2023-03-24 microG...
forum.xda-developers.com
✓Final Step. Recommend To be On Android 12* For Unlocked Bootloader device only
turn-off tab , press & hold (vol+ vol-) together, at the same time insert usb cable from computer to your Tab >>> your tab will wakes up and then >> boot to (download mode) by press vol+
1. BACK TO STOCK ALWAYS
2. Open ODIN with administrator :- flash with Stock BL + AP + CP + CSC ( Not HOME_CSC )
3. After reboot > quick setup >internet required >Set Developer options > Enable OEM Unlock > Enable debugging
4. Connect device with Computer and run > adb devices
Enable give the authorized tab a7 lite associated with your computer.
5.Turn off device. And access download mode.
6. Open odin as administrator.
7. Begin odin flashing with new Custom AP ( AT AP SLOT) + STOCK BL, CP ,CSC AND UDERDATA SLOT with Magisk-patched (boot + vbmeta)
Spoiler: Flashing with odin
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download mode pic.
ignored red warning messages , cause we modified (new super.img)
8.
9. Reboot 3 time , the last boot will pop-up recovery for factory data.
( new system work , if not > Flash Stock framework> back to step 1 )
FIRST BOOT
Don't worry about it.
(same as twrp > wipe data >yes)
First loading Startup page.
every things looks good except can't access drawer menu and not supported exFat sdcard. Can't write access to the system. ( not update or new install any app.)
FootNote:We can't informs or report back any bugs to developer cause they said "depened on our vendor" . then we must test and selects proper GSI that suitatble and best fit for our device. or buy a new device for dev.( if not may be buy APPLE Device.)
Nice. I love it. I want to see Pixel Experience on Tablet. ❤
trieuanh.07 said:
Nice. I love it. I want to see Pixel Experience on Tablet. ❤
Click to expand...
Click to collapse
Thanks next PE release soon.
Now back to release A13,
tom.android said:
Now back to release A13,
Click to expand...
Click to collapse
Booted?
Cuonghmm said:
Booted?
Click to expand...
Click to collapse
Booted but same result as beta test.
tom.android said:
Booted but same result as beta test.
Click to expand...
Click to collapse
Hmm. It's very hard. I think it will perfect if google release a tablet ))
Related
We need:
Axon7Toolkit
Recovery Stock
B9 ROM
1- Have OEM unlocking and USB debugging enabled in developer options.
2- Download and install the Axon7Toolkit.
3-Download the recovery stok and put it in the twrp folder of Axon7Toolkit.
3- Put the update.zip of the b9 on the memory card.
Run the Axon7Toolkit and choose option 11. We follow the steps that shows us on the screen so that we have to select the recovery.
We choose the recovery stock that we downloaded before and we give to accept, when it finishes and we will have the recovery stok again in our terminal.
We close the Axon7Toolkit and go to our terminal. Now we go into the recovery stock and go to "apply update from SD card" and choose the update.zip that we downloaded previously and installed it.
When you start the phone, you can configure it to reach the main screen.
Open the Axon7Toolkit again, select option 7 and follow the steps.
When you restart the phone you will have the bootloader closed again.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank
bkores: Axon7Toolkit
ZTE: B9 ROM
Sorry for my English
Will this work on the A2017U (US model)?
kenet said:
We need:
Axon7Toolkit
Recovery Stock
B9 ROM
1- Have OEM unlocking and USB debugging enabled in developer options.
2- Download and install the Axon7Toolkit.
3-Download the recovery stok and put it in the twrp folder of Axon7Toolkit.
3- Put the update.zip of the b9 on the memory card.
Run the Axon7Toolkit and choose option 11. We follow the steps that shows us on the screen so that we have to select the recovery.
We choose the recovery stock that we downloaded before and we give to accept, when it finishes and we will have the recovery stok again in our terminal.
We close the Axon7Toolkit and go to our terminal. Now we go into the recovery stock and go to "apply update from SD card" and choose the update.zip that we downloaded previously and installed it.
When you start the phone, you can configure it to reach the main screen.
Open the Axon7Toolkit again, select option 7 and follow the steps.
When you restart the phone you will have the bootloader closed again.
Thank
bkores:Axon7Toolkit
ZTE: B9 ROM
Sorry for my English
Click to expand...
Click to collapse
I've rooted my a2017g and want to revert to complete stock. I want to sell the phone. Following your guide I'm stuck cause can't boot to bootloader. No matter which marshmallow build or recovery I use can't seem to bootloader. Any suggestions?
Manually enter bootloader mode.
kenet said:
Manually enter bootloader mode.
Click to expand...
Click to collapse
Thanks for your reply. When selecting bootloader from recovery (either any stock marshmallow or twrp) the phone just reboot.
I am completly stock on b04 Nougat with unlocked bootloader. System is not changed. Can I just relock with 'fastboot oem relock'?
Gesendet von meinem ZTE A2017G mit Tapatalk
Hi,
Has anyone tried to re Lock bootloader after oreo Official update?
MacNavy said:
Hi,
Has anyone tried to re Lock bootloader after orso Official update?
Click to expand...
Click to collapse
I have and failed miserably. I couldn't lock it on three different versions of Nougat or Oreo. Everytime I boot to fastboot the phone just boots into system..
Flash stock full EDL MM and you can lock the bootloader with a7tool.
[MM] [6.0.1] [Stock] Root + Magisk + Xposed - SM-J700H (may work on other variants)*
The only reason that I've created this thread is simple, I couldn't find any proper guide to root my J7 device and the ones that are available aren't helpful at all as they are outdated methods and are obsolete.
I spent a lot of time on the internet finding these packages and in the end finally it worked like a charm!
So, here it goes!
Backup your DATA before proceeding
Optional: You should download the stock base flash file, just in case
Download the latest recovery for your device:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://twrp.me/samsung/samsunggalaxyj7exynos.html
https://twrp.me/samsung/samsunggalaxyj72015qcomsprint.html
https://twrp.me/samsung/samsunggalaxyj72016exynos.html
Download the following package and extract it:
ht t p s: //mega. nz/ #!pYZWWbBT!Nl5LaPxRGs_5bkMML9SwC2lLIpN9-FYxBdpVO5AEuUE
Remove spaces
Click to expand...
Click to collapse
You'll find these files once you extracted the package
Install the apks as they are ordered (leave those 2 zip files as they will be flashed through the recovery)
Now enter into the download mode of your phone by pressing the following keys in combination VOL DOWN + HOME KEY + POWER KEY and connect it to the PC/Laptop. Hit up the ODIN and flash the downloaded recovery.
Follow this procedure as shown in the image, in order to flash the recovery. (Download the ODIN software from the google. I'm sorry I can't provide you the link) :silly:
Make sure you also have installed the Samsung USB Drivers as well! Otherwise ODIN won't detect your device.
Click to expand...
Click to collapse
Now as soon as ODIN flashes the recovery it'll reboot your device in an instance, so keep that in mind, once it does you only need to hold VOL UP + HOME KEY + POWER KEY and if you done it properly and in synchronized time, you'll see the SAMSUNG LOGO and on the top of it a sentence marked in RED color will be shown and after that it'll boot up the recovery.
Now flash those 2 ZIP files which were left before in order through the recovery:
Reboot your phone once you have done flashing those 2 ZIP files (the first reboot may take some time)
If all done according to the steps, then congratulations you've rooted your phone along with installing XPOSED
Proof:
All credits goes to the DEVS who have created these wonderful tools
Enjoy and don't forget to hit the :good:
Very sexy thread!
Thanks love you homie.
People donate to this male, he really brought something crazy to the J7 community
android.zealot.fervor said:
Very sexy thread!
Thanks love you homie.
People donate to this male, he really brought something crazy to the J7 community
Click to expand...
Click to collapse
I just want magisk, not xposed, can it be possible?
Cause a payment app tez not running on rooted phone thats why, want to hide root via magisk.
sourav143 said:
I just want magisk, not xposed, can it be possible?
Cause a payment app tez not running on rooted phone thats why, want to hide root via magisk.
Click to expand...
Click to collapse
yes you can install magisk just skip the xposed installation procedure.
Is there a recovery for j7 perx?
Can I Update Xposed Installer app?
And does xposed is suitable for Samsung Galaxy J7 SM-J700F model?
I encounter the error "Failed to mount '/system' (Device or resource busy"
important question
I have a question
does the smj700 work fine in a phone that is sm j701m? or do I need the twrp for that model?
Latest rom?
SM-G610Y
Hello, does this work with J7 Prime SM-G610Y?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In this thread I'll show how to run different ROM at the same time in J5 2016 Using Dualboot Patcher APP.
So Let's go
Warning : Advanced User Only
Everybody wants to taste all rom for his device . But unfortunately almost all user (99%) use only one rom in his device though he wants to taste latest lineageOS (Oreo,Pie) , MIUI , TOUCHWIZ UI ( Different Version ). So they wipe stock and install desired rom for some hour/day.
But Dualboot Patcher removes this barrier.
I personally used 3 roms [ Stock touchwiz , MIUI 8 , Lineage 16 (pie) ]
Working Procedure :
Step-1 :
Download the followings : website : https://dbp.noobdev.io/downloads/
Android: DualBootPatcher apk (For Android)
Utilities: DualBootUtilities
Win32: DualBootPatcher (For PC)
[ I'm using version 9.3.0.r806.g7cef78be Wed, 4 Jul 2018 18:11:31 -0400 ]
Click to expand...
Click to collapse
Step-2 :
Note : Now Oreo & Pie roms works in any slot . Please must follow the below link for working oreo & pie.
Fix Link : https://forum.xda-developers.com/ga.../dualbootpatcher-installing-oreo-pie-t3880028
i. Before flashing patch the lineage & MIUI ROM using dualboot patcher android app or pc version.
ii. Advanced user should have know patching procedure otherwise ask.
Click to expand...
Click to collapse
Step-3 :
i. TWRP - Advanced wipe - dalvik , system , data , cache ( Only for installing stock rom otherwise Please avoid the step )
ii. Install desired stock rom which you need. ( If you keep stock touchwiz rom then avoid the step )
iii. Then install previously patched lineage oreo , pie or miui rom you wish.
Click to expand...
Click to collapse
Step-4 :
Enjoy !!!
Click to expand...
Click to collapse
reserved 1
Reserved 2
Is it safe to use? Can my phone get permanently bricked because of this?
Francisco Funes said:
Is it safe to use? Can my phone get permanently bricked because of this?
Click to expand...
Click to collapse
Noob Question. [ IS IT BRICK MY PHONE ?]
I've announced this thread for advanced user only. Because every advanced user knows which brick his device & which not.
For your query, Permanently brick a device is so hard process. This thing occurred rarely. No user comment permanently brick his device using dualboot patcher app.
Francisco Funes said:
Is it safe to use? Can my phone get permanently bricked because of this?
Click to expand...
Click to collapse
From what I know it won't(I still am not responsible if it does). Just don't patch the ramdisk on primary. It will reboot you to Download mode (If you do accidentally patch the ramdisk and you had Magisk Installed beforehand just flash the Uninstaller Zip. That will remove all modules but your phone will be able to reboot to Rom. Just in case to not lose your modules etc. Take a backup of your boot.img with twrp if something happens restore it and don't flash magisk uninstaller. Take a new back up for every new primary rom) and also don't use the boot UI rather to change roms use the app use Dualboot Utilities also found on the website. It's a AROMA zip (dualboot utilities) in case you are wondering.
Flegmon said:
From what I know it won't(I still am not responsible if it does). Just don't patch the ramdisk on primary. It will reboot you to Download mode (If you do accidentally patch the ramdisk and you had Magisk Installed beforehand just flash the Uninstaller Zip. That will remove all modules but your phone will be able to reboot to Rom. Just in case to not lose your modules etc. Take a backup of your boot.img with twrp if something happens restore it and don't flash magisk uninstaller. Take a new back up for every new primary rom) and also don't use the boot UI rather to change roms use the app use Dualboot Utilities also found on the website. It's a AROMA zip (dualboot utilities) in case you are wondering.
Click to expand...
Click to collapse
Thanks!
can you give the lineage rom link?
DBP enters fastboot mode on primary android oreo
What should i do when i switch the rom back to the primary (in my case LOS 15.1) with dualboot utlities and it enters fastboot mode?
Phitschhd said:
What should i do when i switch the rom back to the primary (in my case LOS 15.1) with dualboot utlities and it enters fastboot mode?
Click to expand...
Click to collapse
You format everything, install twrp, pick a rom, and stop using a dead project.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This post will guide you on how to unlock the bootloader and install TWRP Recovery on any android device. Using this you can easily root your device and can flash any custom roms. Usually, it's a three-step affair: Unlock the bootloader, flash a new recovery, then use the new recovery to flash a Custom rom.
So, if you want to get the full benefit of your device, head over to steps for unlocking bootloader and installing a Custom ROM.
DisclaimerI'm not responsible if something went wrong on your phone(Usually nothing goes wrong). You are doing this on your own responsibility.
Download and termsTo Download all the files: Click Here
Enable Developer Options: go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
Enable OEM unlock and USB debugging options ( Settings -> Developer options )
Download and Extract ODIN v3.13.1
Download magisk patched TWRP for your device (This TWRP is developed by @santhoosh)
Download Disable_Dm-Verity_ForceEncrypt_xx.xx.2020.zip
Download your desired custom rom
StepsUnlocking bootloader
Enter download mode - Power off the phone, Press and hold Volume Down + Volume Up keys together then while pressing these keys connect the phone to PC with USB, release all keys when Download Mode appears.
In Download Mode you see the long press Vol Up option to enter Device Unlock Mode. Unlock the bootloader ( that will wipe your device so be sure to backup of your data )
Then use Volume UP to select “YES” to confirm
The phone will reboot, now setup the phone and you're bootloader is unlocked
Installing TWRP & Rooting
Make sure OEM unlocking option is grey out
Enter download mode
Open ODIN and Uncheck “Auto Reboot” in Options!
Flash TWRP-M30s- Magisk.tar as AP in Odin
Click Start
And TWRP Recovery is now successfully flashed
Press and hold Volume Down + Power, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Wipe -> Format data, type “yes” and confirm
Select Install – Disable_Dm-Verity_ForceEncrypt.zip Swipe to confirm Flash
Select Reboot to Recovery
Setup the phone
Connect the Phone to Internet
Install Magisk Manager. Magisk Manager will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
Done! You can use Root Checker to check it, Enjoy!
Installatiing custom rom
Enter TWRP Recovery Mode.
Select Wipe – Advanced ( Dalvik, Cache, data, System, vendor and product ) Swipe to wipe.
Select Install – select Razs OS V1 A50s OneUI 3.1 Port For M30s .zip, Swipe to confirm Flash.
Select Reboot – System/recovery.
Setup the Phone.
Flash stock firmware againIf you want to go back to stock ROM
Extract (unzip) the Samsung firmware file. Recommended using WinRAR or 7-Zip
Download Odin Tool 3.13.1
Extract Odin ZIP file
Open Odin execute file
Reboot Samsung phone in Download Mode
Connect you Samsung phone and wait until you get a blue sign in Odin
Add the 1 file Samsung firmware to AP/PDA or 4 files Samsung firmware (AP/BL/CP/CSC) to it's slots
Make sure re-partition is NOT ticked
Click the START button, sit back and wait few minutes
ConclusionIn this post I have talked about how to unlock bootloader, install a Custom Recovery, root and install a custom roms. Tell us What You Say About The guide by commenting and if you have any questions then contact me at this Contact Us page or message me at telegram. Hope You Enjoy in my Website.
Reserved..
https://razsoriginals.blogspot.com/2021/09/test_27.html
download link is not working
求助，三星M30S怎么ROOT。已经解了bl，但是刷入修补的boot或者twrp，都卡在刷机挖煤里面了
android 10，m30s(m3070)，NO ROOT。
twrp不能进入，提示：AVB FILD
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download: https://downloads.projectelixiros.com/thirteen/gsi/
Now it's Android 13 PQR2.
-No data lost.
-Google Assistant can make a phone call from your contact.
( This is a special option for Sam Tab, my locked bootloader T875 can't do this.)
Oh ..sorry QPR-2 Google update Can't make a phone call.
-No AOD on charging.
-We can't make R/W system cause its size will bigger than our SM-T22X dynamic partition.
*(If project Elixir is made R/W the image size exceeds 4.6 GB, this unable to flash the GSI into our tab device.)
* The trick --》If you want to mod system, you must flash Stock firmware then all partition will be R/W again. Such as I mod for auto screen brightness before flashing any GSI.
* Offline charging only break error " Warrant bit" and works in the background but ok.
》》Every things good except "Permissive SELINUX".
》》Supported DSU Sideloading App.
》》Download: Attachment
FastbootD for T225XXS3CWC2
Howto
Code:
adb devices
adb reboot fastboot
fastboot flash system ProjectElixir_3.8_arm64_bgN-13.0-20230526-1530-OFFICIAL.img
reboot
New Floating Navigation Menu. ( Works well when Locked Layout mode)
Re-enable themed icons if you have a problem with Icons.
Elixir 3.8 Camera
Bluetooth & Headphone PHH Treble Setting
Next " VAAP "
Use "RO" variant only (not excess dynamic partition size.)
RESERVED: VAAP A13 GSI
NOW WE CAN'T PATCH RECOVERY FOR FASTBOOTD, CAUSE TRANSFER.SH SCRIPT BREAKDOWN.
tom.android said:
RESERVED: VAAP A13 GSI
NOW WE CAN'T PATCH RECOVERY FOR FASTBOOTD, CAUSE TRANSFER.SH SCRIPT BREAKDOWN.
Click to expand...
Click to collapse
so thats why it wasnt working for me today
Xardly said:
so thats why it wasnt working for me today
Click to expand...
Click to collapse
try to used another file hosting but its fail.
tom.android said:
try to used another file hosting but its fail.
Click to expand...
Click to collapse
yeah same, thankfully I could still download the file I made a while back for the sm-t220
Hello First Of All Thank You For Your Work Actually I Got SM T225 From My College So Unlocking Bootloader Is Necessary To Install This ? I Mean There Are Too Many Threads Which Made Me Confused
thetanmaygupta said:
Hello First Of All Thank You For Your Work Actually I Got SM T225 From My College So Unlocking Bootloader Is Necessary To Install This ? I Mean There Are Too Many Threads Which Made Me Confused
Click to expand...
Click to collapse
yes, you would need to unlock the bootloader to install a custom rom
Xardly said:
yes, you would need to unlock the bootloader to install a custom rom
Click to expand...
Click to collapse
I mean it's gsi wait lmao it doesn't have a/b support omg I haven't opened box saw specs lmao by the way any tutorial for unlocking bootloader or going in to download mode using samfw can unlock bootloader
thetanmaygupta said:
I mean it's gsi wait lmao it doesn't have a/b support omg I haven't opened box saw specs lmao by the way any tutorial for unlocking bootloader or going in to download mode using samfw can unlock bootloader
Click to expand...
Click to collapse
the simplest way to unlock the bootloader is going into developer options and enabling OEM unlock. after that shut the tablet off and put it into download mode by connecting it to a PC and holding down both volume buttons. then you will get a blue screen that will tell you to press and hold volume up button to unlock the bootloader and that it will reset your device data. once your device reboots your bootloader is unlocked.
Xardly said:
the simplest way to unlock the bootloader is going into developer options and enabling OEM unlock. after that shut the tablet off and put it into download mode by connecting it to a PC and holding down both volume buttons. then you will get a blue screen that will tell you to press and hold volume up button to unlock the bootloader and that it will reset your device data. once your device reboots your bootloader is unlocked.
Click to expand...
Click to collapse
Ok I Found OEM Unlocking Is Disabled Now Thing's Are Actually Getting Complicated