Related
Hi experts!
Is there an available factory image of the latest firmware for griffin xt1650-03 for download? I unlocked my boot loader and tried to flash custom firmware now I am stuck in boot loop. My phone was nougat and updated via OTA last week before I decided to unlock boot loader. I tried loading the latest image I got from firmware.center but I am getting Downgrade version and verification failed when flashing stock partition and not loader. Please help
Note: I did this my wifi became unusable after my last OTA (mac 02:00:00:00) and thought using custom firmware would help
And I did not make a back up
Get it in fastboot mode, flash TWRP and root it. That might work.
I am in exactly the same position as OP, although I have successfully installed TWRP and have open bootloader from which I can boot into TWRP no probs. I didnt do a backup (will never again make this error!!)
The problem arises when I try to flash (any) files over to device I get the "Downgrade version and verification failed" like OP when flashing stock Telus rom (telus phone) or any other rom/files.
Rebooting brings me back to the moto unlocked bootloader page (horrible!) and the only way out is to get key combo or fastboot into bootloader/recovery etc.
Tried flashing multiple images as whole or bit by bit, always get the same bad validation message. Finding it hard to believe this 700dollar phone is a brick after literally following MotoS own 'unlock your bootloader' instructions. Never had issues like this on OPO, S6, S7, LG etc.
PC shows android device connected, nothing in the two empty folders that appear. TWRP confirms I have no OS installed and throws me back to bootloader.Wondering if locking bootloader again will allow me to install 'stock' ROM or at least recovery? I have reached my android knowledge limit and am not sure where to go from here, any help much appreciated!
OK. This happened to me. The way that I solved it was by flashing the RETUS NPL86.25.15 and then flashing the OTA 25.17-3-3 through twrp. Although I think I could've saved the headache if the original instructions included flashing the OEM.bin but anyways. That's what I did. Hope it helps.
Thanks. I did try flashing the oem.bin but got partition name error.
Can you link to the files you mention I think it's a kernel and then an OTA image? Thanks again in advance.
What I mean is that when I first started flashing the RETUS rom the instructions skipped that part so I ended up flashing most of the file system without something so it would never boot but it wouldn't loop it'd just hang. So basically you flash everything and then include the OEM.bin after you do the system chunks
Hi folks,
I followed this tutorial and managed to unlock bootloader and install TWRP.
But on startup, stock rom was asking to enter a code (30 try allowed in "secure startup") which I didn't set in the first place, each reboot costing two try.
So, with no way to use my phone with this OS, I got into TWRP and try Factory reset --> not working (TWRP cannot mount partition).
I tried "Wipe DATA" (not advanced) --> not working (back to "secure startup").
After each reboot booting to secure startup, TWRP was replace automaticaly with stock recovery and I had to reflash it.
Then, I made the mistake to wipe (advanced) system, cache, dalvik and data... realising afterwards that I had no custom rom zip to flash to replace stock rom...
Now I'm stuck with TWRP (seems to work...), a unlocked bootloader with annoying "unlocked" messages and... 2 KDZ firmware files (EU-SP and EU-GB) I don't know what to do with.
I also have a flashable image of the stock recovery, but don't know what to do when it's on.
Plz, someone could help ?
Any other option than to wait for LineageOS to support my phone ?
camuzic said:
Hi folks,
I followed this tutorial and managed to unlock bootloader and install TWRP.
But on startup, stock rom was asking to enter a code (30 try allowed in "secure startup") which I didn't set in the first place, each reboot costing two try.
So, with no way to use my phone with this OS, I got into TWRP and try Factory reset --> not working (TWRP cannot mount partition).
I tried "Wipe DATA" (not advanced) --> not working (back to "secure startup").
After each reboot booting to secure startup, TWRP was replace automaticaly with stock recovery and I had to reflash it.
Then, I made the mistake to wipe (advanced) system, cache, dalvik and data... realising afterwards that I had no custom rom zip to flash to replace stock rom...
Now I'm stuck with TWRP (seems to work...), a unlocked bootloader with annoying "unlocked" messages and... 2 KDZ firmware files (EU-SP and EU-GB) I don't know what to do with.
I also have a flashable image of the stock recovery, but don't know what to do when it's on.
Plz, someone could help ?
Any other option than to wait for LineageOS to support my phone ?
Click to expand...
Click to collapse
Ah, you have kdz file? You can search lg flash tool to flash that kdz
Or you can use recovery option in "LG Bridge", there's a recovery option somewhere on the botttom right of the software.
Sent from my MI 6 using Tapatalk
ted presley said:
Ah, you have kdz file? You can search lg flash tool to flash that kdz
Or you can use recovery option in "LG Bridge", there's a recovery option somewhere on the botttom right of the software.
Sent from my MI 6 using Tapatalk
Click to expand...
Click to collapse
Hi again ! Thx for your answer.
I had try to use LGUP with EU-ES KDZ file and didn't work because of the "REFURBISH" setting checked.
FYI : Uppercut is awsome beacause it allows LGUP to recognize my phone on the go, but it triggered 2 of my antivirus... false positive, I hope !
I change to select "UPGRADE" and it did work and this time tried the EU-GB KDZ.
Android is starting... and I'm relieved. I'll post an update for success or if anthing occurs.
Thx once more.
So, it's confirmed : it worked.
Back to stock ROM. I'll try to reinstall TWRP and to Root later.
Hope my adventure iwll help someone else.
I went through the same torture in my quest, but I did not tell you guys about it in my instructions in the thread you referred to. If I had done so, I would have likely confused and scared off many of the first-timers. What you need is to follow to the point my instructions, than nothing bad will happen. Nevertheless if you fall again into that same horrible state, you just do LDUP upgrade and start a new.
camuzic said:
So, it's confirmed : it worked.
Back to stock ROM. I'll try to reinstall TWRP and to Root later.
Hope my adventure iwll help someone else.
Click to expand...
Click to collapse
svetloslav said:
I went through the same torture in my quest, but I did not tell you guys about it in my instructions in the thread you referred to. If I had done so, I would have likely confused and scared off many of the first-timers. What you need is to follow to the point my instructions, than nothing bad will happen. Nevertheless if you fall again into that same horrible state, you just do LDUP upgrade and start a new.
Click to expand...
Click to collapse
I'm not yet allowed to post in the dev section, because I'm new to this forum but I think this tutorial, despite being real handy and precise, lacks of three informations :
a warning and explanations on the "30 try secure start problem"
juste a little more details on the LGUP part : just add to set the type of flash to "upgrade"
warn people about waiting for a complete boot, even for fastboot and recovery : I come from Samsung and there was no messages on startup nor needed to wait that long before accessing to fastboot or recovery. I believed a few times that it hadn't worked just because it didn't boot straight to recovery.
My main concern was about that goddam code code coming out from nowhere, 30 try before what? If anyone now more, I think I would not be the only one to be glad to know...
Last request : plz give me some "thx points" so that I could join you guys in the dev part... I'm no beginner to those things ?
Qual sua versão do modelo?
840 internacional? Europeia? Latina?
Is there a dll file for h840? Thank you
Back to Stock with @raystef66's Files
This guide used a method stemmed from paranoia. Now that we have decent flashable files everything is much simpler!
We'll be using raystef66's flashable TWRP files to go completely back to stock. At the end there's instructions if you want to lock your bootloader.
Be sure that you are on the latest TWRP version!
1) Files to Download:
- TWRP Flashable Bootstack/Stocksystem Image from here: Download Center. Download the latest BOOTSTACK and STOCKSYSTEM from there.
- If you want to lock the bootloader, also download the STOCK RECOVERY zip from the same stocksystem version that you downloaded. The flashable stock recovery zips are on the Factory Images Division, right above the TWRP flashable files.
- Magisk 15.2 (or latest), or SuperSU 2.79 (Latest not recommended ). If you will relock the bootloader, skip this part.
2) Installation
- Put all the files on the internal storage or SD card. Backup your important stuff from the internal storage, because you might need to format it!
- Go to TWRP. Wipe data, system and cache (don't format data though).
- Install the bootstack that you downloaded. Then install the stock system.
- If you will NOT relock the bootloader, install Magisk or SuperSU
- Reboot
If the phone asks for a password when it gets to the system, go to TWRP. It will ask for a password, just select Cancel. After you're on the main TWRP screen, select Wipe, then Format data, then type yes. After that, reboot.
3) 5 second screen removal / restore Fastboot
This is useful whether you're relocking the bootloader or not. Just go to raystef66's guide and follow it completely. After doing it your phone will have Fastboot (very good for softbricks and relocking), no 5 seconds screen (your phone will boot up faster) and it will be even closer to full stock.
4) ONLY FOR RELOCKING - Replace TWRP with Stock Recovery
Simply go to TWRP and flash the stock recovery file you downloaded. After that, enable OEM unlocking and USB debugging from the dev options, and then go to Fastboot and issue "fastboot oem lock".
@Choose an username... thanks for the credits.
you can return to stock in that way. you can reflash twrp with tool, allways checking bootloader still unlocked.
I allway update in this way, reboot to twrp, flash the recovery image, not a zip, its the same, but I make sure that the recovery correspond to the base version in my phone. after that, I reboot to system directly, update in the ota way, or the zip way, but from running android, rooted or not, and I dont have to wipe.
After update is done, the most important thing is leave the phone till it is completly booted, then you can reflash twrp with axon7tool again.
You dont need to root, you dont need anything to keep twrp. You only need to flash supersu or magisk if you use darkenfx zips. And if you do it, you have to backup wipe and restore cause you lose encryptation.
But thats all. I think stock rom its still the best, not in battery life, but in camera and bundled apps, It works perfectly, except, I have 2 bugs since allways, wake up with proximity sensor covered, and whatsapp online with app in background, I can live with that
I can re-lock bootloader after this process?
thanks for the guide.
Help Needed ! A2017g Bricked while trying to returning to stock
Hi, Please help me to get my Axon 7 in a working state. I was using Xenon HD Rom for A2017g Oreo. With twrp version as suggested in the guide.
I followed the procedure, installed the bootstack and then stock system B09
But when I tried to reboot, it said no OS Installed. Then I rebooted, and it was stuck at bootloader with no twrp and just the message as follows :
Android Recovery : ZTE/P996A04_N/ailsa_ii
7.1.1/NMF26V/20171120.101942
user/release-keys
Use volume up/down and power
and then certain other options in blue
Please help !
I also have a Problem.
I tried going back to stock from LOS 14.1. Now I am stuck on the 5 seconds screen, it won't continue.
The files I used were the Nougat B10 Files :-/
HansWursT619 said:
I also have a Problem.
I tried going back to stock from LOS 14.1. Now I am stuck on the 5 seconds screen, it won't continue.
The files I used were the Nougat B10 Files :-/
Click to expand...
Click to collapse
Enter the recovery, it should be the stock one (turn the phone off, then hold vol+ and power). Then download a stock B10 file (not the twrp flashable one) and install it from an SD card
No its not the stock one, its still TWRP.
I only flashed Bootstack and stock system (step 2). The reboot afterwards doesnt work
What do you mean by "a stock B10 file"? There are so many files types :-/
I am not quite sure what I should do now, do I have to do the EDL route? That one sounds confusing as well.
EDIT: I tried using B08 Files and now the reboot prompt in TWRP tells me there is no os installed.
Will I, like naveen09y, end up without TWRP if I reboot now?
HansWursT619 said:
No its not the stock one, its still TWRP.
I only flashed Bootstack and stock system (step 2). The reboot afterwards doesnt work
What do you mean by "a stock B10 file"? There are so many files types :-/
I am not quite sure what I should do now, do I have to do the EDL route? That one sounds confusing as well.
EDIT: I tried using B08 Files and now the reboot prompt in TWRP tells me there is no os installed.
Will I, like naveen09y, end up without TWRP if I reboot now?
Click to expand...
Click to collapse
Probably, so just don't. You should just wipe system and data, flash the bootstack, then the system. Also follow raystef's guide to "remove bootloader unlocked inscription"
I now managed to get the phone working with EDL flash of MM B10.
But I cant relock the bootloader :-/
Bascially my bootloader is gone so I cant reboot to it and do "fastboot oem lock".
Why is this such a hassle
HansWursT619 said:
I now managed to get the phone working with EDL flash of MM B10.
But I cant relock the bootloader :-/
Bascially my bootloader is gone so I cant reboot to it and do "fastboot oem lock".
Why is this such a hassle
Click to expand...
Click to collapse
You didn't follow my instructions. Follow raystef's removed unlocked bootloader inscription and you'll get fastboot back. You can do that with the phone on.
Don't relock it unless it's really necessary (i.e. warranty). If you're gonna sell it just follow that guide and don't relock, the 5 seconds screen will disappear and it'll look like it's locked
I cant follow the guide because I can't access the bootloader...
Also the TWRP files in https://forum.xda-developers.com/axon-7/how-to/guide-install-twrp-unlock-bl-flash-t3517379 this guide (step 6) are no longer accessible.
HansWursT619 said:
I cant follow the guide because I can't access the bootloader...
Also the TWRP files in https://forum.xda-developers.com/axon-7/how-to/guide-install-twrp-unlock-bl-flash-t3517379 this guide (step 6) are no longer accessible.
Click to expand...
Click to collapse
What? Lol
First of all - you are basically installing the bootloader with raystef's guide, so I have no idea why you want to enter it...
You have to enter TWRP and follow the guide from there.
The guide from Controllerboy is basically the same guide but it also has instructions on other things (i.e. unlock etc.). I don't know what you are trying to accomplish with it. Use EDL Tool by djkuz if you want to install TWRP (it is explained there how to do that).
Phone was rooted with Magisk 16, I was on AEX Android 8.1 ROM. I'm trying to return to stock and relock bootloader.
I wiped everything, I flashed A2017G-N-B10-bootstack and A2017G-N-B10-stocksystem from "TWRP flashable Bootstack/Stocksystem Images" section. Booted to system and now phone is stuck on the ZTE POWERED BY android boot screen. 5 minutes there. Is it normal?
Edit: Got tired of waiting and kept pressing the power button. After doing so, the phone reboots but same thing. And I can't access TWRP with VOL INCREASE + POWER BUTTON.... VOL DECREASE + POWER BUTTON takes me to Factory Test Mode.
aLexzkter said:
Phone was rooted with Magisk 16, I was on AEX Android 8.1 ROM. I'm trying to return to stock and relock bootloader.
I wiped everything, I flashed A2017G-N-B10-bootstack and A2017G-N-B10-stocksystem from "TWRP flashable Bootstack/Stocksystem Images" section. Booted to system and now phone is stuck on the ZTE POWERED BY android boot screen. 5 minutes there. Is it normal?
Edit: Got tired of waiting and kept pressing the power button. After doing so, the phone reboots but same thing. And I can't access TWRP with VOL INCREASE + POWER BUTTON.... VOL DECREASE + POWER BUTTON takes me to Factory Test Mode.
Click to expand...
Click to collapse
Try this.
Oki said:
Try this.
Click to expand...
Click to collapse
Yes, thanks. I already had seen it some minutes ago. It's so convenient that you posted this guide today lol
I want to flash stock rom from RR Nougat. I have installed latest twrp, flash bootstack and then stock system. After that I flash supersu 2.79. But when I press reboot system it say no OS installed
Willchi said:
I want to flash stock rom from RR Nougat. I have installed latest twrp, flash bootstack and then stock system. After that I flash supersu 2.79. But when I press reboot system it say no OS installed
Click to expand...
Click to collapse
The best way to return to stock is via EDL, for example MiFlash or EDL tool. If you have an U, then DrakenFX's zips can do that, it happened to me already. Usually G zips like raystef's work just fine.
Try using Magisk instead of SuperSU, just in case. Use 16.7
@Choose an username...
Thanks for posting this.
Credits to all concerned a big thumbs up.
I do however feel that there are to many versions of the Axon 7 packages and I can see why people are ending up with boot issues etc.
Syberclone said:
@Choose an username...
Thanks for posting this.
Credits to all concerned a big thumbs up.
I do however feel that there are to many versions of the Axon 7 packages and I can see why people are ending up with boot issues etc.
Click to expand...
Click to collapse
what
you do realize this guide is older than a year right?
Yeah, its all good
Hello everyone, after a long attempt at unlocking the bootloader i finally got it, i flashed TWRP and got a prompt for encryption password, and my password wasn't working and i also tried default_password,so i read that the format data option will decrypt the phone and people said wouldn't do anything to system, so i did it and now everytime i reboot it boots straight into recovery no matter what i try, it will also boot into fastboot, so i tried to find a stock ROM for TA-1056 but couldn't find it anywhere, the only the i found was a single ROM for the TA-1060, can anyone help? i really appreciate it!
Completely Bricked
Me too need a stock rom of ta 1056. Please help if you could manage to provide a helping hand... ?
I had the same issue like yours, looping in twrp. then i tried to flash it with a so called stock rom from net, guess what it went completely bricked and I donnow what to do. ??
mrabudi said:
Hello everyone, after a long attempt at unlocking the bootloader i finally got it, i flashed TWRP and got a prompt for encryption password, and my password wasn't working and i also tried default_password,so i read that the format data option will decrypt the phone and people said wouldn't do anything to system, so i did it and now everytime i reboot it boots straight into recovery no matter what i try, it will also boot into fastboot, so i tried to find a stock ROM for TA-1056 but couldn't find it anywhere, the only the i found was a single ROM for the TA-1060, can anyone help? i really appreciate it!
Click to expand...
Click to collapse
It's simple. just get the stock recovery (and boot, optional) to flash it with fastboot and go to recovery and wipe it and you'll be ok.
and also using the twrp on this phone is not a great idea to wipe.
if you wanna wipe. please use "fastboot -w" to wipe the phone while bootloader is unlocked. or stock recovery to wipe.
Because twrp built this recovery with only formatting option was ext4 to /data and /cache. So the phone cannot operate properly. Which leads to fake failed decryption notification.
Data partition must need to be formatted under f2fs format.
And finding rom for this phone is pretty easy. Just find some nb0 file for this phone (any variant of this phone should work) and extract it with "nb0 extractor" and then flash it with SP Flash tool by mediatek.
That's my way. I don't know how will you do. But normally you only need the nb0 file and then flash it with OST LA (Nokia's flash tool based off Intel's SUT L1/L3 tool).
My Nokia 1 TA-1047 stuck at Nokia logo screen
Hi guys, sorry I'm newbie so after a long time surfing for solutions, I couldn't solve my own problem. That's why I come here to ask for your supports
Firstly I unlocked bootloader, installed TWRP and rooted my device and enjoyed it. But after decided to wipe (factory reset) this phone with TWRP, and my problem began...
1. I got stuck in TWRP loop booting. After that I tried to fastboot system.bin, cache.bin and recovery.bin from Stock Firmware but it still hung at Nokia logo booting
2. I still kept trying with SP Flash Tool, Miracle Box but there was still no hope:
- SP Flashtool v5_1548 gave me error: BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)
- Miracle Box 2.27A told me there was an error (i don't remember the code) occured in the location (i can't remember its code either)...
Anyone can solve it please help!!!! I love this phone much and as of now still suffering day by day since I can't do anything with it.
Kindly appreciate any suggestion and solution.
Thank you all!
cuantonhonhoi said:
Hi guys, sorry I'm newbie so after a long time surfing for solutions, I couldn't solve my own problem. That's why I come here to ask for your supports
Firstly I unlocked bootloader, installed TWRP and rooted my device and enjoyed it. But after decided to wipe (factory reset) this phone with TWRP, and my problem began...
1. I got stuck in TWRP loop booting. After that I tried to fastboot system.bin, cache.bin and recovery.bin from Stock Firmware but it still hung at Nokia logo booting
2. I still kept trying with SP Flash Tool, Miracle Box but there was still no hope:
- SP Flashtool v5_1548 gave me error: BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)
- Miracle Box 2.27A told me there was an error (i don't remember the code) occured in the location (i can't remember its code either)...
Anyone can solve it please help!!!! I love this phone much and as of now still suffering day by day since I can't do anything with it.
Kindly appreciate any suggestion and solution.
Thank you all!
Click to expand...
Click to collapse
So here's the thing. The rom you downloaded from internet (about 2 GB) or ripped from your phone and reflashing from flash tool will NOT WORK.
The first reason you can't flash the ROM was:
You got into flashing mode but you didn't do the right way so it failed the downloading DA for the phone. Try again and it should work (Don't go into fastboot mode)
2nd reason:
Because of the unsupported chip that MiracleBox read. It said the phone was 6573 or something while the phone chip is 6737M.
So the app will create the wrong version of the scatter for the phone. Leads to the flash tool app downloading the wrong command and Download Agent for the phone makes the phone can't be flashed.
You need to get the official nb0 file for this phone (TA-1060 or 66 should also works, mine was TA-1047. Since it's a universal ROM so any variant of the phone can also work) and then extract the ROM. Then you can get the scatter text file from that nb0 ROM and then flash it over flash tool (version 5 recommended, version 3 more likely not work).
Remember to look at line with partition "metadata" and then edit "boundary_check" to false.
PLUS:
If you flash it with your own dumped EMMC rom or flash it by dd-ing the partition in recovery will kinda work. But when you update the ROM over OTA (Google Play services's System Update app)
It will most likely bootlooped the phone when it's trying to verify the 2nd partition of the same recovery or kernel flashed into the phone (https://source.android.com/security/verifiedboot) and flash the updated one.)
So flashing from official ROM is mandatory.
And you can flash it over Intel's (Nokia modified) flash tool app SUTL3 (aka. OST LA) but I can't get it to work so you just stick with Flash Tool v5 from MediaTek and you'll be good.
Link:
The nb0 ROM (Security update around May 2018): https://drive.google.com/file/d/1XqwEAGG7GMaspzV2J_yzCxnRei8zsOJd/view
(Source: https://romprovider.com/2018/09/nokia-1-ta-1060-firmware/)
nb0 extractor, requires java installed (If extracting hurts your hard disk performance aka. frozen or lag. Don't worry, It actually works, DON'T DO ANYTHING. It will notify you once it's done.): https://forum.xda-developers.com/general/general/tool-unpack-repack-nb0-rom-t3495091
Smart Phone Flash Tool from MediaTek: https://spflashtools.com/
My fixed scatter file that actually works from nb0 file: https://drive.google.com/open?id=1gRoADGHBm4vIAw3NeDyc_h9QWj12XUrC
And don't use twrp for wiping the phone. Use "fastboot -w" to wipe or use stock recovery.
TWRP will wipe the data parition but in ext4 format and make the phone bootlooped. We need f2fs in order to make the phone's /data partition run correctly. (Unless you know how to make the phone not having encryption flag when booting up every first time. Or modify TWRP to wipe the /data partition with make_f2fs and not make_ext4 app. Or using make_f2fs in recovery to directly wipe /data partition over terminal, the actual partition is in /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/userdata.)
Or you just do this (I'm not tested it yet): Google "twrp f2fs format"
kutiz21 said:
So here's the thing. The rom you downloaded from internet (about 2 GB) or ripped from your phone and reflashing from flash tool will NOT WORK.
The first reason you can't flash the ROM was:
You got into flashing mode but you didn't do the right way so it failed the downloading DA for the phone. Try again and it should work (Don't go into fastboot mode)
2nd reason:
Because of the unsupported chip that MiracleBox read. It said the phone was 6573 or something while the phone chip is 6737M.
So the app will create the wrong version of the scatter for the phone. Leads to the flash tool app downloading the wrong command and Download Agent for the phone makes the phone can't be flashed.
You need to get the official nb0 file for this phone (TA-1060 or 66 should also works, mine was TA-1047) and then extract the ROM. Then you can get the scatter text file from that nb0 ROM and then flash it over flash tool (version 5 recommended, version 3 more likely not work).
Remember to hide/delete line with partition "metadata" in scatter.txt and you can flash it perfectly.
PLUS:
If you flash it with your own dumped EMMC rom or flash it by dd-ing the partition in recovery will kinda work. But when you update the ROM over OTA (Google Play services's System Update app)
It will most likely bootlooped the phone when it's trying to verify the 2nd partition of the same recovery or kernel flashed into the phone (https://source.android.com/security/verifiedboot) and flash the updated one.)
So flashing from official ROM is mandatory.
And you can flash it over Intel's (Nokia modified) flash tool app SUTL3 (aka. OST LA) but I can't get it to work so you just stick with Flash Tool v5 from MediaTek and you'll be good.
Link:
The nb0 ROM (Security update around May 2018): https://drive.google.com/file/d/1XqwEAGG7GMaspzV2J_yzCxnRei8zsOJd/view
(Source: https://romprovider.com/2018/09/nokia-1-ta-1060-firmware/)
nb0 extractor, requires java installed (If extracting hurts your hard disk performance aka. frozen or lag. Don't worry, It actually works, DON'T DO ANYTHING. It will notify you once it's done.): https://forum.xda-developers.com/general/general/tool-unpack-repack-nb0-rom-t3495091
Smart Phone Flash Tool from MediaTek: https://spflashtools.com/
My fixed scatter file that actually works from nb0 file: https://drive.google.com/open?id=1gRoADGHBm4vIAw3NeDyc_h9QWj12XUrC
And don't use twrp for wiping the phone. Use "fastboot -w" to wipe or use stock recovery.
TWRP will wipe the data parition but in ext4 format and make the phone bootlooped. We need f2fs in order to make the phone's /data partition run correctly. (Unless you know how to make the phone not having encryption flag when booting up every first time. Or modify TWRP to wipe the /data partition with make_f2fs and not make_ext4 app. Or using make_f2fs in recovery to directly wipe /data partition over terminal, the actual partition is in /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/userdata.)
Or you just do this (I'm not tested it yet): Google "twrp f2fs format"
Click to expand...
Click to collapse
Thanks for your comment. I have recently bought that version (TA-1047) and I see that is more complicated to root it securely than I thought… Your comment gave me hope to try it. So, could you please say me if it is posible to do it without breaking it? I will read your comment when I have more time but I thank you for it!
As I see there is only stock rom for TA-1060 version, but as you say it is posible to recover it in case of breaking it, isn't it?
Thanks. :fingers-crossed:
pabloluih said:
Thanks for your comment. I have recently bought that version (TA-1047) and I see that is more complicated to root it securely than I thought… Your comment gave me hope to try it. So, could you please say me if it is posible to do it without breaking it? I will read your comment when I have more time but I thank you for it!
As I see there is only stock rom for TA-1060 version, but as you say it is posible to recover it in case of breaking it, isn't it?
Thanks. :fingers-crossed:
Click to expand...
Click to collapse
It's really easy to root the phone actually. Just unlock bootloader, install twrp recovery and install magisk.
And if you broke the phone's ROM. Just bring it to Nokia. Or flash it by yourself with the ROM I linked above by SP Flash Tool software.
Anyway the ROM is universal. So any variant of the phone can be flashed. (Proves that the elabel partition has 5 certifications images for 5 different models)
Just take sometime and read my words there.
kutiz21 said:
It's really easy to root the phone actually. Just unlock bootloader, install twrp recovery and install magisk.
And if you broke the phone's ROM. Just bring it to Nokia. Or flash it by yourself with the ROM I linked above by SP Flash Tool software.
Anyway the ROM is universal. So any variant of the phone can be flashed. (Proves that the elabel partition has 5 certifications images for 5 different models)
Just take sometime and read my words there.
Click to expand...
Click to collapse
Many thanks! At the moment I achieved to root it with twrp. OEM unlock > installed twrp > fastboot -w > magisk.
At the moment all is okey but I have not been able to unencrypt DATA partition (I have done fastboot -w, but with no success, I have not tried TWRP format because of your advice). That's the only point I can complain about.
I hope I do not have to use the stock rom to unbrick, but I have your advice if I do.
Thanks again!
pabloluih said:
Many thanks! At the moment I achieved to root it with twrp. OEM unlock > installed twrp > fastboot -w > magisk.
At the moment all is okey but I have not been able to unencrypt DATA partition (I have done fastboot -w, but with no success, I have not tried TWRP format because of your advice). That's the only point I can complain about.
I hope I do not have to use the stock rom to unbrick, but I have your advice if I do.
Thanks again!
Click to expand...
Click to collapse
That's weird. If you unlocked the bootloader and install adb/fastboot (must be latest version. Older version will not recognize the phone, download platform-tools from google dev site, don't download adb tools off XDA) + Nokia's driver from emulated CD drive (every time you plug the phone to computer with official rom, you'll see it) properly then it should be able to work.
You need to check the fastboot device driver Device Manager (devmgmt.msc) and see if the driver is properly installed yet.
You can only use "fastboot -w" once the bootloader is unlocked. And booting up the phone. It will say the bootloader is in Orange state.
You need to unlock oem bootloader from developer settings when the stock rom is there. And in fastboot too
Here is how you unlock it:
Enable oem unlock from dev settings
Then reboot to fastboot mode (bootloader)
Do this:
"fastboot oem key "serial number string converted to md5, not imei strings" "
"fastboot oem unlock"
Volume up
Then you are actually unlocked the bootloader.
Unlock from developer settings only will not do the trick. It only allows you to have ability unlock the bootloader in fastboot.
If you stuck on the Encryption unsuccessful screen. Try wipe it with stock recovery or "fastboot -w" (if you properly unlocked the bootloader)
If you think you can't do anything anymore. Just flash the ROM provided you above.
If you need the extracted ROM for SP flash tool and the fastboot driver. I can link it to you.
Most of all drivers will automatically install off Windows Update if you're on Windows 10 (except the fastboot driver, and yes. SP flash tool drivers are also provided by Windows 10 too)
Also. You should update the phone to the latest software update when flashing stock rom too. Because newer builds for this phone is compatible-friendly with GSI rom (Treble ROMs like AOSP Android 9 or 8.1 by phhusson)
Updates on Android 9/10
pabloluih said:
Many thanks! At the moment I achieved to root it with twrp. OEM unlock > installed twrp > fastboot -w > magisk.
At the moment all is okey but I have not been able to unencrypt DATA partition (I have done fastboot -w, but with no success, I have not tried TWRP format because of your advice). That's the only point I can complain about.
I hope I do not have to use the stock rom to unbrick, but I have your advice if I do.
Thanks again!
Click to expand...
Click to collapse
Nokia might harden the security of the device so you can't use Magisk on stock rom.
Hey guys,
I already soft bricked my device (I think) -.- I rooted it with the patched boot image and accidently installed a magisk module which caused a boot loop.
I booted into TWRP and didn't read that for now we can't mount the important partitions, so there went that. I rebooted to stock recovery and erased my complete device (factory reset + userdata) and now it bootloops into the bootloader.
Can't boot stock recovery or ROM.
Is there any chance to recover it with the current tools we have or do I have to wait for a fully working TWRP?
Any tip is appreciated
Is this topic something you can work with?
https://forum.xda-developers.com/7t-pro/development/recovery-oxygen-os-stock-recovery-adb-t3991865
MarkSnijders said:
Is this topic something you can work with?
https://forum.xda-developers.com/7t-pro/development/recovery-oxygen-os-stock-recovery-adb-t3991865
Click to expand...
Click to collapse
Thanks for the hint, but no chance. After flashing the recovery and reboot, the 7t pro always reboots to bootloader :-\
Edit: Could switch the boot slot and was able to enter recovery. Tried the modified one with adb function, but sideloading a rom is not possible adb: sideload connection failed: closed
I think I have to wait for TWRP
dre-z said:
Thanks for the hint, but no chance. After flashing the recovery and reboot, the 7t pro always reboots to bootloader :-\
Edit: Could switch the boot slot and was able to enter recovery. Tried the modified one with adb function, but sideloading a rom is not possible adb: sideload connection failed: closed
I think I have to wait for TWRP
Click to expand...
Click to collapse
Try this:
- Reboot to bootloader (If not possible, hold "Volume Down" & "Powerbutton" to boot into recovery, from there select "Boot Fastboot")
- Open CMD and type "fastboot flash boot boot.img" (I attached the 7tPro AA Boot.img)
##EDIT##: Well, unfortunately I'm not allowed to post extern links, so you have 2. options. Somewhere here in the Opt7tPro threads, some guy posted a link where he uploaded the stock boot image. Should be found here https://forum.xda-developers.com/7t-pro/help/rooting-oneplus-7t-pro-t3983533/page2 (scroll down ). Option 2, you downlaod the 7T OTA from OP website and extract the payload.bin with the programm "payload_dumper-win64". This will extract a more or less working boot image..
Your phone should then be able to boot normally again.
If it does, you will probably find out, that your WiFi, Speakers & Camera won't work.
Don't worry, this is because you maybe need the BA boot.img.
Then there are to options.
1. You wait until OP releases the original files on their website, as they did with the 7t
2. You go to "Settings", "System" & "Factory Reset", to reset your phone. (By now, this is the only way to fix the problem, so you can use the patched boot again)
If you choose option 2, after the "installation" screen, where it asks to enter your language, you must boot your phone into fastboot again.
Then you can flash the patched boot image again and your phone should work as normal
I was on same situation, i planned to root, but not found really 7T PRO rom, 7T ot 7 PRO has totally different ROMs, so i made a big mistake, to flash different rom. Phone stuck in boot loop. After 1.5 day google searching, i found one, that can bring back phone to live. I found a fresh 7T PRO rom, and simply flashed back, it booted, and finally everything's works good. Must to download fresh factory rom: https://androidfilehost.com/?fid=4349826312261606254, unzip it to any folder, start your phone in fastboot mode, plug in usb cable, (other eng plug to PC) and then simply do double click at the unzipped folder to flash all.bat file. You will get some errors, it's totally normal. Within 4-5 minutes your phone will works again. Hope it will work at you.
You, my fellow xda guys, are amazing!!! The solution with the stock boot.img helped me out!
Now I can start using my 7t pro after 3 days ^^