I don't wanna be rooted anymore. I just want to use the device as it is. Is there any way I can relock my device, which was originally on Chinese rom, that is now in Global rom latest September 2022 OTA.
If anyone has relocked their device on global rom, how did you do it without bricking?
Yes, read the comments in that post that teaches how to convert it
If you already did an ota update and was ok you can reset to factory and just unlock from fastboot. No brick.
Related
Just curious if the new 2.3.4 gingerbread OTA can be unlocked using pudding. I'm having to get my atrix replaced via warranty and if the replacement happens to come with gingerbread already on it i want to know if i'll be able to unlock it or if i'll be stuck using p-roms.
You should be able to unlock it with pudding since its the same version of gingerbread that we have. Also, don't flash any sbf files (except pudding) because it has the new bootloader and you'll hard brick it if you do.
You can unlock with pudding and fastboot BUT there's a high chance you'll soft brick first with 0x1000 ... all you need to do is get into fastboot mode and redo the oem unlock command.
mysticdrew said:
You can unlock with pudding and fastboot BUT there's a high chance you'll soft brick first with 0x1000 ... all you need to do is get into fastboot mode and redo the oem unlock command.
Click to expand...
Click to collapse
Alright, just to be absolutely, completely, all the way, 101% sure: does this OTA have ANY bootloader restrictions, be they a brick or non-unlockable bootloader. Has anybody tried to unlock the bootloader and run a custom ROM on the AT&T OTA? I just want to be able to run custom ROM's down the road (as in full ROM's, as in Cyanogenmod).
Do the OTA and never, never go back to any older stock version via RSD. Or you'll brick your phone.
@Chairsofter1138: the ota bootloader is locked. flash the pudding to unlock.
Alright, has anyone actually attempted to unlock the OTA via the pudding method? I'm being extra cautious here because I don't want to be stuck with a permanently locked down phone. Does it matter, then, if I use Kenthepenns (sp?) installation method or OTA straight from AT&T/ Motorola?
Chairsofter1138 said:
Alright, has anyone actually attempted to unlock the OTA via the pudding method? I'm being extra cautious here because I don't want to be stuck with a permanently locked down phone. Does it matter, then, if I use Kenthepenns (sp?) installation method or OTA straight from AT&T/ Motorola?
Click to expand...
Click to collapse
Yes everyone has been unlocking via pudidng because it's the same leaked version that has been out for the past couple weeks.
Yes Going to this OTA will make a brickable phone. You WILL NOT BE ABLE TO DOWNGRADE via traditional SBF.
This is the question everyone has been asking on every thread and the devs aren't answering.
I am locked and stock on 1.83. My fuse HAS not been burnt. I want to be
1. On Gingerbread
2. Unlocked
The problem is that all the current gingerbread sbfs said you had to be ALREADY unlocked to flash them, so I don't know how anyone has been testing this OTA with a locked bootloader. If you had the new Gingerbread, you were already unlocked, is how I understood it.
Questions in follow up to the above:
1. If I OTA before unlocking, what do I flash afterwards to unlock? Saying 'pudding' because there's 10,000 files in that thread, including links to an 'unlocker.sbf', as well as a full sbf operating system. What specific file?
2. Lots of new builds say they have an 'unlocked bootloader' built in, but nobody can figure out what that means. Does that mean you can flash them without being unlocked to unlock? What do you need to do to unlock after you flash them?
3. If I unlock now at stock 1.83, and take the OTA, what happens, is the bootloader locked again? I know OTA installs a new bootloader.
Please someone help me understand. There's too much hard bricking and misinformation out there on all the dev threads. What's true (and please tell us how you know).
I noticed everyone talking about the OTA. I saw on the Moto site that the new update is only available OTA but there's a link for download for the file "Blur_Version.4.5.91.MB860.ATT.en.US". Can anyone confirm that this can be installed without brick on an unlocked bootloader? I've seen other threads stating so but they're not really clear on what's being said.
m0use1 said:
This is the question everyone has been asking on every thread and the devs aren't answering.
I am locked and stock on 1.83. My fuse HAS not been burnt. I want to be
1. On Gingerbread
2. Unlocked
The problem is that all the current gingerbread sbfs said you had to be ALREADY unlocked to flash them, so I don't know how anyone has been testing this OTA with a locked bootloader. If you had the new Gingerbread, you were already unlocked, is how I understood it.
Questions in follow up to the above:
1. If I OTA before unlocking, what do I flash afterwards to unlock? Saying 'pudding' because there's 10,000 files in that thread, including links to an 'unlocker.sbf', as well as a full sbf operating system. What specific file?
2. Lots of new builds say they have an 'unlocked bootloader' built in, but nobody can figure out what that means. Does that mean you can flash them without being unlocked to unlock? What do you need to do to unlock after you flash them?
3. If I unlock now at stock 1.83, and take the OTA, what happens, is the bootloader locked again? I know OTA installs a new bootloader.
Please someone help me understand. There's too much hard bricking and misinformation out there on all the dev threads. What's true (and please tell us how you know).
Click to expand...
Click to collapse
+1 to everything this guy said..There is a ton of guests in this forum wondering the same **** too. Devs are doing a fantastic job, but us end users (including myself) don't really have a sense of direction right now.
(SOLVED)
Im in stock 4.1.2 whit S-OFF, unlocked bootloader (1.55) and then RELOCKED.
¿Can i take the last OTA?
Im not rooted, and i dont have custom recoverys (i recently flashed a RUU.zip to return to stock, but i could not remove the S-OFF and RELOCKED status because the hboot 1.55).
I have economic (health) problems and I'll really need to sell my phone, but I'm afraid that the new owner will come out error when trying to update.
conquesoextra said:
Im in stock 4.1.2 whit S-OFF, unlocked bootloader (1.55) and then RELOCKED.
¿Can i take the last OTA?
Im not rooted, and i dont have custom recoverys (i recently flashed a RUU.zip to return to stock, but i could not remove the S-OFF and RELOCKED status because the hboot 1.55).
I have economic (health) problems and I'll really need to sell my phone, but I'm afraid that the new owner will come out error when trying to update.
Click to expand...
Click to collapse
Yes. You can get OTAs while S-OFF. And assuming you haven't unlocked the bootloader since flashing the RUU, all the system files it verifies should be in place to accept OTAs. However, considering you are currently on 4.1.2, you'll need to run through a progression of OTAs to get up to the latest version, 4.4.2 w/ Sense 6. Might be better to just run the latest RUU to bring it up to 4.4.2 w/ Sense 5.5 then OTA to Sense 6. Be aware that you'll need to be on the AT&T network in order to get the updates OTA. If you're not on AT&T, you'll need to flash the updates manually, in which case you'll need to be S_OFF.
Also, once the phone is S-OFF there is no good reason to change that back to S-ON. There's the potential of bricking the phone by doing so. And even if it doesn't brick, the updates in firmware may make it more difficult to obtain S-OFF again.
Thank you very much.
At the begining i did this:
1- Unlocked bootloader and flashed TWRP.
2- Root
3- Gained S-Off
When i decide to sell it i did this:
1- Removed xposed and root.
2 - Relocked bootloader.
3 - Flashed RUU.zip (4.1.2)
¿What do you mean whit AT&T network? I unlocked the phone vía imei (using it in mexico whit Telcel) and still have the update appearing.
Sorry for my terrible english
conquesoextra said:
Thank you very much.
At the begining i did this:
1- Unlocked bootloader and flashed TWRP.
2- Root
3- Gained S-Off
When i decide to sell it i did this:
1- Removed xposed and root.
2 - Relocked bootloader.
3 - Flashed RUU.zip (4.1.2)
¿What do you mean whit AT&T network? I unlocked the phone vía imei (using it in mexico whit Telcel) and still have the update appearing.
Sorry for my terrible english
Click to expand...
Click to collapse
First off, since you are S-OFF there is no need to relock the bootloader in order to flash an RUU. It will run just fine with an unlocked bootloader. Also when you flash an RUU, all the partitions get wiped so there is no need to do anything within the ROM such as remove xposed & root prior to flashing. The RUU will set the device essentially in a factory state.
As far as I understand it, the OTAs for carrier specific devices are served up by the carrier. So if the phone has been SIM unlocked and is being used on another network, if you go into Settings>AT&T software update, it will not receive any available OTA update. You will need to flash the update file manually using the information in this thread, http://forum.xda-developers.com/showthread.php?t=2659374.
Since you are still on 4.1.2, you will need to run one of the recent RUUs in order to manually flash the OTA updates in that thread. The latest RUU available for AT&T devices is KK4.4.2 w/Sense 5.5.
http://androidruu.com/getdownload.p...09_10.26.1718.01L_release_356565_signed_2.exe
Flash that then you can manually flash the OTA update to get Sense 6.
You are the man.
THANK YOU SO MUCH!
Hi everyone,
So here's my query
Back in March I have unlocked my redmi note 3 bootloader by OFFICIAL way of redmi. But I now I m thinking what was the use of doing with official way why not unofficial.
In simple words can someone tell me down in comments section
What benefits I can get over official rather someone who has unlocked unofficially!!
Thanks
Best way is to unlock it by official method .
Read here an answer from an advanced user from miui forum:
"Hello,
Official way of unlocking is considered as the safest way of unlocking bootloader since it is done with MiUnlock Tool, and if the BL is unlocked then it won't relock during an OTA update or while flashing an incremental rom and the only way to relock BL is to flash fastboot rom through Miflash, but you have to get permission from Xiaomi for unlockin and it will take sometime.But on the otherhand unofficial way doesn't required any permission and risk factor is involved in this method, where you have to use stock rom emmc file to replace miui emmc and need to flash through Miflash, many users reported that they have bricked their device by following the same. In order to flash rom's, everytime you have to replace emmc, if you forgot then you will end up in bootloop. I guess I have cleared your doubt.
Thank you. "
cristiandiaconu6 said:
Best way is to unlock it by official method .
Read here an answer from an advanced user from miui forum:
"Hello,
Official way of unlocking is considered as the safest way of unlocking bootloader since it is done with MiUnlock Tool, and if the BL is unlocked then it won't relock during an OTA update or while flashing an incremental rom and the only way to relock BL is to flash fastboot rom through Miflash, but you have to get permission from Xiaomi for unlockin and it will take sometime.But on the otherhand unofficial way doesn't required any permission and risk factor is involved in this method, where you have to use stock rom emmc file to replace miui emmc and need to flash through Miflash, many users reported that they have bricked their device by following the same. In order to flash rom's, everytime you have to replace emmc, if you forgot then you will end up in bootloop. I guess I have cleared your doubt.
Thank you. "
Click to expand...
Click to collapse
Yes
Thanks man
Hi,
I'm using HD01BA (= EU version) with unlocked bootloader and root with Magisk. I understand that updating OOS or updating Magisk is quite annonying as there's no TWRP and as it needs specific precautions such as disabling Magisk modules and reinstalling them after updating.
Since I now barely use root, I think I would benefit more from being able to get OTA updates than having root. I'd like to know how to unroot - and relock bootloader if necessary - without bricking the phone.
Would I have to wipe everything ? Will unrooting enable OTA updates or do I need to relock bootloader as well ?
Thanks
{Mod edit: @DrBazinga THREAD CLOSED as duplicate of https://forum.xda-developers.com/7t-pro/how-to/unroot-relock-bootloader-to-ota-updates-t4175285/ that has been moved to Q&A!}
If your bootloader is locked, one of the dumbest things you can do is try to install potentially unstable firmware. If something goes wrong, you won't be able to recover your device.
If you did anyway, the only way you should try to return to stock is with the Android Flash Tool, which should work as long as OEM Unlocking is enabled.
If you're on a device that cannot be unlocked, you should wait the Android 13 official release.