Welcome to the Perseus kernel! I thought it would be a nice catchname considering the Galaxy/Universe/Pegasus themes.
I'm trying to be more cutting-edge in terms of development in this kernel. In contrast to other kernels and philosophies of other developers, I don't believe giving the users more choice is a very smart thing to do. As such you won't find a dozen different governors or twenty different settings for this kernel. There is a optimal, or at least, most optimal setting on which the devices operate both in terms of performance and power management. For the average user this kernel will brings lots of benefits to battery life, screen improvement, fluidity and sound enhancements without having to set up any of the configurations.
The kernel comes with a configuration application called STweaks, and is installed automatically with the kernel. You will find all advanced options in there.
Don't be scared by the alpha denomination of the kernel, I'm just taking the traditional naming scheme where alpha designates feature development, beta is feature-completeness, and final will actually be when I'll actively stop developing the kernel. The kernel is very stable, and any bugs are fixed in hotfix versions (alpha x.y)
The kernel is also being maintained and released cross-device for the I9305 (S3 LTE), N7100 (Note 2) and N7105 (Note 2 LTE) and shares the same base-source.
Features / changelist:
Perseus alpha36.3 (26/04):
Fixed slice lookup issue on ABB: It's recommended you put your slices back to default before flashing if you changed them to borderline stability values. Please upgrade.
Perseus alpha36 (22/04):
Adaptive Body Bias control (ABB). (Experimental feature)
Body biasing is taking advantage of transistor body effect for binning the chip depending on its quality. In fact, this is used on the latest Samsung SoCs both for reducing power consumption and validating bad chips by adjusting their electrical characteristics.
The body bias is dictated by the voltage applied to the transistor gate (The usual voltages you're all used to) minus the voltage applied to the transistor body. The resulting bias can change the transistor's electrical characteristics in two possible ways:
Before reading on: A transistor's voltage and operating frequency is defined/limited mostly on its threshold voltage. Wikipedia has a neat visual representation of this; voltage must raise to a certain point for the transistor to be able to switch and operate. This threshold voltage can be highly dependant on temperature, influenced by the body effect, and defined by the manufacturing process. What we're doing nowdays with undervolting is to get as near as possible to the upper bound of this threshold voltage.
With that in mind:
Forward Body Bias
A FBB is defined when the bias of the gate voltage minus body voltage is positive, meaning the gate voltage is higher than the body voltage. This has the effect of reducing the threshold voltage. By reducing it, you can achieve lower voltages, or be able to clock the transistor higher. However the side-effect of lowering the threshold voltage is that you are sacrificing power leakage, meaning that the lower the threshold voltage becomes, the higher leakage current in the transistor becomes. This leakage power rises exponentially with a linear lowering of the threshold voltage. This is what is called static transistor leakage.
Reverse Body Bias
A RBB is defined when the bias of gate voltage minus body voltage is negative, meaning the gate voltage is lower than the body voltage. it has the direct opposite effect of FBB, it raises the threshold voltage thus you would need a higher gate voltage for switching, but however you also dramatically decrease static leakage.
What happens is that you want to use RBB when idling, and a reduced RBB, or even FBB at very high clocks.
Samsung currently uses this on top of voltage scaling to bin their chips. Here's an excerpt of the stock body biasing on the 4412 Prime chip (I'm using that one as an example as it has better adjusted ABB values over the Rev 1.1 chips).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
To find out your ASV group: You can read out your ASV group in /sys/devices/system/abb/abb_info now.
I have rewritten the ABB scaling logic/driver for CPU, GPU, MIF and INT voltages.
In the current implementation, since it would be insane to have paired-up gate-body voltages divides the frequency range in several slices; even Samsung uses only three voltage ranges on the DVFS scale. I divided the frequency ranges as follows:
CPU: Divided into four slices, with frequency ranges of 200], 800], 1600] and ]1600 Mhz.
GPU: Three slices: 160], 533] and ]533 Mhz.
MIF and INT: Both only two slices with the bottom frequencies for each as middle-threshold.
As mentioned above, controls can be found in /sys/devices/system/abb/ and the entries are self-explanatory. You can also change the frequency slice limits per sysfs, however in STweaks I only included the voltages for each slice only for now.
Disclaimer
{ And that's about it in that regard. I have tried testing things over last couple of weeks, but I haven't come to a solid conclusion yet beyond what's presented by the stock characteristics: It's up to you people to do some advanced testing on the matter. My limited empirical testing in terms of voltages tells me it works as intended, but if a user with advanced measuring equipment would do similar testing to what I did back on the 4210 it would be perfect. }
zRAM: Switched over from LZO to Snappy compression algorithm, this provides much faster compression and decompression than the LZO implementation which was in the current kernel. I updated the Snappy libraries to the latest original CSNAPPY implementation, so this is extremely new.
Some kernel internal updates to speed up hotplugging and improve I/O latencies.
A correctly (Unlike basically every other kernel out there till now) applied load averaging patch regarding fixing a Moiré pattern in the scheduler load calculations which was floating around.
Fixed mono and equalizer switches in the sound engine. (Thanks to sorgelig for beating me to it)
Fixed led controls to behave correctly with user-space apps.
mDNIe digital brightness reduction:
You can now lower the brightness to basically nothing via this: it uses the mDNIe engine to digitally remove luminance from the RGB channel values, as opposed to reducing brightness via a proper backlight/display driver. The side effect of this is that you lose colour resolution somewhat, but is a practical and working method to reduce the too bright minimum values of our displays.
You have three configurables:
A reduction rate which you want to apply, this is the intensity of the darkening you want to achieve.
The take-over point; the backlight driver gets fed brightness values from 0-255 (In reality values below 20 have no effect). The take-over point is the point where the digital brightness reduction starts, on a reverse scale. The reduction is applied linearly from 0, (Full reduction taking place), to the take-over point (Zero reduction). The stock slider doesn't go below 20 in the interface, so practically the full reduction rate is never applied unless you use a third-party brightness controller app, just to keep that in mind, but in practice it doesn't matter.
Auto-brightness input-delta: This is needed because the stock framework is retarded in the values it forwards to the kernel, you can adjust this to avoid having brightness reduction when you don't want it on auto-brightness.
Somebody needs to edit config_autoBrightnessLevels, config_autoBrightnessLcdBacklightValues in framework-res.apk\res\values\arrays.xml to fix this.
Optionally, if you use a third-party app like Custom Auto Brightness which allows backlight values of down to 0, you can avoid this problem.
The register hook needs to be enabled to be able to use this function.
Increased the maximum brightness by 50 candela: the manual controls were limited to 250cd as maximum as opposed to 300cd which was only usable during auto-brightness, and unusable for any third-party apps.
Unaligned memory access throughout the kernel when applicable.
Switched over to GCC 4.7.3 Linaro toolchain for compiling.
Perseus alpha35 (06/04):
Further rewrote the in-kernel audio controls:
Threw out the old detection methods for something more robust.
This particularly enables non-cellular applications such as Skype, Viber, and so on to be detected correctly. A "calling" state now includes any and all use-cases where the audio is outputted via the phone's earpiece. This fixes microphone levels for such apps to correctly use the calling sensitivity value.
Added microphone level for camera use, this state is enabled whenever a camera stream is active. It should give more options into adjusting things to your likings.
By now the sound engine has only little similarities to Boeffla, any bugs and feedback now go directly to me.
Developers only: MHS: Added a new small tool for tracking media use and reporting it to other in-kernel drivers. Capable of detecting video recording, decoding and camera streams for now. See commit for more info.
mDNIe control changes:
Removed several controls in STweaks simply because people misunderstood them or misused them, or they simply had no rational use.
Video detection, now with the help of MHS, is no longer limited to the stock video player. Any video players using hardware decoding will now be able to make use of edge enhancement, HDR and DNR, this includes any web-based players and the YouTube app.
Custom LED controls implemented; Exposed most variable controls for the notification LED via sysfs and STweaks (LED tab). :
Control LED brightness. Currently the OS dictates, depending on brightness detected by the light-sensor, wether to run the LED in a low-power mode or in a high-power mode, you can now set brightness for both.
Blinking control, this is basically the shape of the wave-pattern that the LED blinks in, you have several controls, best described the data-sheet description:
The fade-in time period is TT1 in the graph, while the fade-out period is TT2.
Slope (1/2/3/4) detention time represents DT1,2,3,4 in the graph, it controls how "steep" the four different curves are.
The LED fading checkbox simply switches between having the detention times controlled by the sliders to having them to 0 (Stock blinking behaviour).
Increased default zRAM size to 400mB. This won't override your STweaks setting, so only new users will see the new value. Others should please adjust the value manually to your liking.
Sources:
https://github.com/AndreiLux/Perseus-S3
Credit and thanks:
gokhanmoral, netarchy, and anybody credited in the commits.
TL;DR: before flashing aside from known issues in the second post.
This isn't an AOSP kernel. I won't work with CM and AOSP derivatives.
DOESN'T WORK ON SAMSUNG JELLYBEAN 4.2.1 ROMS.
Known issues [Updated 02/12]
None
Older changelogs
Perseus alpha34 (22/03):
Updated sound engine. Based on Boeffla (Andip71)sound but custom fork with rewritten system interface and some other code re-factorings.
Should fix all FM Radio issues.
Brings us saturation prevention for the equalizer.
Privacy mode.
Microphone level control
You now have control over the speaker equalizer via sysfs, please visit /sys/class/misc/wolfson-control/ the controls are self-explanatory.
I removed the equalizer pre-sets from STweaks, if you want, set them manually:
Bass-extreme: 12 8 3 -1 1
Bass and Treble: 10 7 0 2 5
Treble: -5 1 0 4 3
Classic: 0 0 0 -3 -5
Pleasant for ears: 4 3 2 3 1
Eargasm: 12 8 4 2 3
I recommend HeadphoneAmpControl (thread - Play Store) for controlling the volume directly on a hardware level; it will overwrite the digital volume of the OS and use the hardware amplifiers only.
Enabled ZRam by default with disk size of 200mB and swappiness of 90%.
The ZRam control is found in the I/O Tab in STweaks. Set it to 0 to turn it off completely, any other value to turn swap on. Changing value takes about ~10-20 seconds depending how loaded the disk is with swap pages so don't piss your pants if it doesn't react immediately.
Applied a requested patch which allows PCs to be booted off from the phone storage.
Perseus alpha33.2 (27/02):
Master profile is correctly calibrated.
Detailed calibration report: Download
Advanced colour management report: Download
All thanks goes to Slimer777 for his excellent work.
Perseus alpha33 (26/02):
Revamped and hopefully final version of mDNIe controls:
The controls work now on two levels: First we have a master sequence that overrides any and all of Samsung's settings; currently this version is released without calibration, however in the next minor version it will be updated with proper professional screen calibration. See the Note 2 thread to see what to expect here too. The master sequence is calibrated to sRGB norms on a precision level equalling and even surpassing the iPad3/4.
The master sequence works as as the calibrated base; for people not wanting to bother further with any more controls, you simply enable this and you're done.
Second part is the register hook, it catches effect values and modifies them by applying delta values available as controls in STweaks and in /sys/class/misc/mdnie/hook_control/.
Leaving both these options will give you Samsung's default values, plus the black crush fix.
The register hook, while used on Samsung's profiles, is not capable to alter effects which are not integrated in that screen profile's value sequence, the "Movie" profile for example lacks some effects present in the "Dynamic" profile. The same is valid when having different scenarios, the "Camera" scenario will use different effects in its base than the "UI" scenario. To fully explore all possible effects, use the Master profile as it integrates all effect values known.
Each control has a master kill-switch which enables or disables the effect. This varies by profile and scenario, so you have control to only "toggle" the switch, whatever its state may be in.
Digital noise reduction - Reduces and flattens out grain. Advanced controls are found in the hook_control folder with the dnr_ prefix.
High dynamic range - A HDR effect which brings out details in dark and extremely bright scenes.
Digital edge enhancement - An edge enhancement effect. What we previously called "sharpening". Divided in controls for radius, amount and threshold. Read the Wikipedia page for more information. More advanced controls found in the sysfs under the de_ prefix.
For the above three effects, scenario consideration is taken into account. You can enable/disable them depending when you want it to be applied. Please be aware only the stock applications trigger the scenarios. I will try to enable at least the video scenario depending on when the hardware decoder is active in the future so that they are enabled also in third-party video players.
Chroma saturation control - Same as in previous version but with fixed labels.
Colour temperature control - By default this is disabled on all profiles, however, if your screen has a tint to it, this is the first control you should try to fix as it alters temperature on all channels.
The SCR controls are colour channel filters working on the Red, Green, Blue, Yellow, Cyan, Magenta, White, and Black channels.
Imagine the controls as manipulating the corners of the RGB cube:
(Credit to Wikipedia for the graphic)
By controlling the RGB coordinates of each corner/channel we can mould the cube into a different shape. At the same time the cube is projected onto a hexagon; the perimeter of the hexagon represents the colour hue, the radius of the hexagon from the middle represents chroma. We can use the chroma saturation controls to "push in" each corner of the cube, while moulding the corner's directions with the RGB controls. The RGB coordinates can be transformed into the HSL space space if needed, however I didn't include this function yet as I don't feel the need for it.
STweaks has controls for the RGBYCMW channels, the K (Black) channel I left out because it makes no sense in altering it, but can be found in the sysfs folder.
Several controls have a "factory setting" switch, this are the burned in-hardware values for some controls, they overwrite the controls themselves.
Additionally to the controls exposed to STweaks, there are several other effects and modifiers exposed in the sysfs interfaces. This also includes the gamma curve controls for levels 0-255 in steps of 16.
There are also some additional unidentified configurables which I wasn't able to properly give a name to or had no effects: Dithering, ABC (Seems to give a gamma brightness boost), SCC, UC, and MCM (Colour temperature) configurables whose exact effect isn't documented.
Perseus alpha32 (29/01):
Charging control implemented. This is my own version.
Charging currents:
Charging currents are dictated by input and charging current limits. The input current is the current flowing into the device through the USB port at 5V. The charging current is the current delivered to the battery at usually 4.35V. The device can have a higher charging current than input current because of the voltage differential, usually a 15% discrepancy. You can also have much higher input currents than charging currents, this can be useful when you are using the device in situations like gaming and charging your battery at the same time, provided your charger actually can provide the power.
There are 3 USB charger type categories: DCP / Dedicated Charging Ports which also includes AC chargers, but also special USB plugs; SDP / Standard Downstream Ports which usually includes almost all data enabled USB ports, and CDP / Charging Downstream Ports which includes also data enabled USB ports but which are designed to provide more power, usually on newer laptops where the USB port has a lightning logo next to it. More info here. - Technical explanation here.
Charging logic:
Stable margin removal option. The charger chip is capable of detecting unstable charging sources; it dynamically reduces the input current in 100mA steps until it detects a stable voltage input [We don't have the charger chip datasheet, so the technical explanation is a bit blurry here on how it decides that it's unstable]. It further reduces it by 100mA as a safety margin, you can disable this now.
Complete disabling of unstable power detection. This simply ignores unstable power sources and leaves the input current limit at its set up value. This will fix charging problems people have been reporting. However, please use it at your own risk, the S3 chargers which have had these symptoms clearly have some issue in their hardware so you might actually kill them with this option enabled as there is no protection from the phone's side anymore.
The actual input current limit can be read out in /sys/devices/platform/samsung-battery/power_supply/battery/current_max, so you can see the real limit there, it's the closest thing we have to the actual charging current on stock values since there is no hardware to read out the live currents.
Voltage control:
Hard voltage control: 4.20, 4.35V, and 4.40V charging voltages are available. This is included for anybody running on third-party batteries, whom most of them have a 3.7V battery chemistry as opposed to the 3.8V on the stock battery. These batteries should be charged at 4.2V instead of 4.35V.
Soft voltage control: As opposed to the hard voltage control which is the voltage which the charger chip provides to the battery while charging, the soft-voltage is the battery voltage itself. 3.7V batteries have a top-off voltage of 4.2V and 3.8V again 4.35V. The default limit on the stock battery is 4.30V before the charger logic stops and considers the battery as full. This is also merely provided for 3rd party batteries which should be charged at lower voltages. If you overcharge your battery beyond these what are safe considered voltages, such as raising the default 4.30 top-off voltage to the design 4.35V or even higher, you are running into the risk of damaging the battery or even causing it to melt-down. Use at your own discretion.
mDNIe sharpness and RGB/YCM chroma saturation control in STweaks:
I started implementing sharpness control in STweaks and went a bit over-board instead of a simple checkbox; You now have controls over the mDNIe registers as a delta offset value compared to the stock register values. I'm applying the offset to all mDNIe profiles and scenarios which have the specific post-processing effect active in that specific scenario. Meaning, that you start with the default profile; Dynamic / Standard / Natural / Movie and have the delta offset applied on top of that.
Sharpness delta. This is what brought most of the quality difference in hardcore's original tweaks. You can now fine-tune it to your own taste, and also take into regard that it produces a different effect for each screen profile while having the same delta - the base values between the profiles are different.
DE control - I don't know what this actually does and I couldn't discern much difference between the values, but it used to be disabled in hardcore's tweaks.
Chroma saturation control: This is composed of 2 values for each RGB/YCM channel. See the Munsell color system for a visual representation of the values controlled here. The chroma curve control describes the curve weight based on chroma intensity, the chroma gain is the chromatic gain that is being applied on the respective channel. Chromatic saturation weight is again another multiplier for all channels combined. I have not managed to properly identify the chroma grey threshold and its effects.
Basically this is like an RGB control on steroids, and enables you to tune your screen to your own liking and calibrate it as you wish. Please note that not all scenarios in the profiles have chroma saturation effects, the Movie profile for example has no effect applied to the UI so chromatic control has no effect on it.
I also want to state that the above are my deductions and theories on the descriptions of these controls, I'm not familiar enough on colour theory to be able to confidently say that these descriptions are correct, and the controls are a work-in-progress for now. Experts are welcome to contribute here.
Front buffer early suspend delay option for those who have issues with the CRT animation.
Did some refactoring on the Mali drivers and fixed a bug which may have caused less capable undervolting than the stock implementation.
Perseus alpha31 (09/01):
Removed my own security fixes and replaced them with the official Samsung one. I guess it can now be disclosed: exynos-mem was only one of multiple entry-points for the memory exploit. We discovered the s5p-smem exploit ourselves back in December but kept it quiet, I fixed that one back in version 29.2 without mentioning. Nobody was secure from a smart exploiter up until then, SuperCurios or Chainfire's software fixes are also just patching a single hole in what is a Swiss cheese. Kernels >v31 and beyond stock LLA are now the only truly protected ones.
Samsung's fix for the sudden death syndrome (SDS) included. It is caused by eMMC failure on phones with VTU00M internal memory chips with revision 0xF1. You can check your phone with the "eMMC Brickbug Check" in the Play Store (Ignore the message if it says you're not affected, the type and revision is what matters). The patch is a firmware soft-patch that is applied on every boot and MMC resume, it is not a permanent fix. You will need to stay forever on kernels which include the patch, this also includes updated recoveries and their embedded kernels.
Some other minor MMC changes extracted from Update 7 sources.
Harmonized some mif/int max voltages with the Note 2 limits.
Perseus alpha30 (06/01):
Internal and memory voltage control. This is the first and only working implementation out there. Memory interface voltage is exactly what it the name implies, the voltage on the chip-to-chip interface from the SoC to the memory chip. Internal voltage is the whole SoC voltage excluding CPU, GPU, and the MIF. This includes all auxiliary function blocks such as the ISP/Image signal processor, camera interfaces, I/O interfaces, display controller and the MFC/Multi function codec hardware video de-/en-coder.
Internal voltage respectively memory voltage table is found in /sys/devices/cpu/busfreq/ as int_volt_table or mif_volt_table
The frequencies are defined as OPP's (Operating performance points), internal frequency and memory frequency (And voltages) together as a pair form an OPP. If you want to change the voltages through the sysfs files, keep in mind how you change them. MIF voltages are stored independently with each OPP step. INT voltages are stored in respect of their frequency key.
Default OPP steps are: 400200, 267200, 267160, 160160, 133133, 100100. The first three numbers represent the memory frequency, the other three the internal base frequency. For example 267200 means the memory interface is at 267MHz (533MHz DDR) and the internal frequency is 200MHz.
The voltages in STweaks are sorted out through some magic and are frequency unique, I recommend using that for controlling them.
Busfreq logic control added into STweaks, this includes all the already available configurables in the stock kernel with added explanations and I supplemented it with a sampling rate parameter.
Some minor source updates from Samsung regarding some new sensor drivers.
Replaced pegasusq's runqueue detection logic with a new more superiror and precise in-scheduler collection logic, I found that the real runqueues are much less than what was previously reported. This should help a lot with hotplugging.
Enabled AFTR by default since we are now running very often in single-core mode. Keep in mind this mode is WFI Idle + LPA + AFTR.
Fixed a kernel bug which was eating up randomness entropy. This is related to that whole seeder business - please don't use any of those fixes. I also disabled virtual addresss randomization and at the same time disabled entropy generation from the block layer, which should avoid I/O overheads.
Perseus alpha29.2 (24/12):
Another minor (major) release due to security. Please update.
I screwed up something touchscreen related in v29 that disabled Flexrate requests, fixed now.
Changed Flexrate requests so that they don't scale down in their sub-samples anymore. This should improve fluidity.
Perseus alpha29 (18/12):
I'm doing a quick release because of the security fix, not very feature rich.
Fixes the exynos-mem security hole. This is my own fix and will not break camera. Read about it here. You don't need to use Chainfire's or Supercurio's fixes, in fact, you shouldn't use them because of the camera.
Updated Wifi drivers.
Added GPU utilization control to sysfs and STweaks.
Changed default GPU thresholds to more relaxed values (75/17)
Added block device read-ahead control to STweaks. Additionally set the default read-ahead for internal memory to 256kB and 1mB for SD cards.
29.1: - Reverted the Wifi drivers back and did some CMA adjustments to see if that fixes some random reboots of people.
Perseus alpha28 (13/12):
28.1: I reverted the striked out changes due to exFat. I changed my mind due to demand. I apologize for the chaos.
On your SD card showing up as damaged: it is not.
I made a decision in terms of exFat compatibility; either I advance the kernel with newer upstream Linux versions or stay back and keep compatibility with the exFat modules. While I have nothing against proprietary modules or such, not being able to adapt them to the kernel is not optimal. You can format your cards to FAT32 or ext4 without much issue. Please back up your data and format your card accordingly before flashing v28.
[*]Updated the block system to Linux kernel 3.3.
Introduced FIOPSv2, ROWv4, ZEN, BFQv5 as new I/O schedulers;
FIOPS is the new default scheduler, it's a CFQ like fairness scheduler optimized for solid state storage. ROW should be the actual better performer here as it has superior logic, but I didn't set it as default because of some lags when installing applications. ZEN is just a mix of SIO and Deadline and nothing special. BFQ seems to underperform. I recommend the first two over everything else, and added the latter two just for comparison's sake.
Added dynamic Fsync control (Faux123). It disables Fsync only when the screen is on. Enabled by default (Fsync off).
Changed some logic on when the adaptive scaling voltages are applied in the kernel init sequence. This fixes GPU voltages not being applied at boot and also fixes the wrong default voltages being displayed in STweaks.
STweaks tab for I/O with scheduler selection for each device block and also dynamic Fsync.
New script side feature in the uci.sh framework: When inserting an override.profile file into the profile folder (/data/.perseus), the entries in the override profile will supersede the ones in your default profile. You can use to make CWM zips to turn off set at boot flags or to share targeted settings with others. The override is applied once at boot after which the profile deletes itself.
Perseus alpha27 (02/12):
Sources updated with various updates from N8000u1 base. Included are following important changes;
CMA memory allocation has been altered and page handling in the kernel in regard to CMA affected pages has been dramatically improved, this should fix the high load of the "migration" process users have had since initial Jellybean kernels.
Updated wireless drivers.
Adds a delay to SD Card host controller power-down, which I assume is to prevent some corruption. There is a specific change to Toshiba 19nm manufactured SD Cards, these are mostly the latest SanDisk 64GB cards. Together this may fix issues users have had.
Updates the camera interface, Video4Linux and Jpeg2x drivers and this fixes compatibility with 4.1.2 ROMs. Backwards compatibility is retained.
Other updates which are more transparent to the end-user.
New PegasusQ logic:
- We now have additional conditionals on the hotplug logic which checks the total load across all cores and is able to bias towards a specified core count if the load is low. This is useful because previously we could have had frequency spikes and lots of low-load threads triggering a hotplug-up while in reality it wasn't needed. The core count is more biased on keeping 2 cores online in most cases now unless really needed.
- The way freq_step is handled has changed. We now take the remainder of load space above the up threshold and dissect it into three slices each having different frequency increase step sizes. The first two slices are each of up threshold differential size, lop-sided towards the lower end of the load scale. We specify the slice size and freq_step delta in regard to the original freq_step.
- A new fast-down scaling logic; if frequency is beyond a certain threshold, we take a heightened up_threshold value solely on the down scaling logic to scale down more aggressively from the higher frequencies.
STweaks. This is my custom implementation of the kernel side, based on Gokhan Moral's initial implementation.
- CPU overclocking and voltages interface.
- Configurables for all CPU governor settings.
- GPU overclocking and voltage interface.
- Interface for audio enhancements.
Perseus alpha26 (14/11):
Updated MTP drivers back to the newest version. Fixes some inconsistencies which some people had.
Further increased MMC command timeout from Linux default 300ms to 3s in trying to finally squash errors and "unexpectedly removed SD card" after resume.
Ported Gokhan Moral's mDNIe interface and also added colour tone modes on top of the scenarios. System interfaces are found in /sys/class/misc/mdnie . Input syntax is the same as the output syntax, or, single register-value pairs as a single line in the output format, except 0xFF which is a terminator value.
Increased default sampling rate down to 30ms from 50ms for a bit more fluidity.
LTE devices only: Updated some power management functions on the MDM modem from latest sources; this will drastically decrease the amount of wakelocks on mobile data and improve battery life.
26.1
Disabled net_os_rxfilter_add_remove userspace/ROM filter management in the Wifi driver to prevent the operating system of enabling unwanted pass-through multicast and broadcast filters while in standby.
Perseus alpha25 (23/10):
Raised and fixed USB, MISC charging rate to 900mA.
Enabled OTG car dock, smart dock and music dock charging. Alternatively this can be triggered if you short pins 4 and 5 of the USB connector with a 40.2kΩ, 64.9kΩ or 619kΩ resistor.
MTP fixed on OSX devices.
Fixed ROM power savings feature, this was originally broken because of the addition of overclocking, and the same interface that Samsung uses for limiting CPU speed in power savings mode also limits the max frequency to factory defaults. This is now fixed and powersavings mode will throttle to 1000MHz.
Fixed mis-configuration of the default audio settings to improve sound quality, sorry about that.
Ripped out the old GPU scaling mechanisms and scaling logic and replaced it by something new.
The old mechanism was getting overly complicated and was a remnant of the Galaxy S2 where we merely had 2 frequency steps originally; this was fine then, but isn't anymore today. The threshold fuçkery was confusing to a lot of people and people generally misconfigured their settings with inane values.
The new scaling logic follows a more CPU governor-like approach: Scaling up logic is basically the same as before: the GPU will scale up to the next frequency step when the load reaches a certain threshold. Up-scaling takes place step by step. The up-scaling threshold is now global and a single value applies for all frequency steps.
Scaling down in the new logic resembles more like the ondemand method; The scaling down takes place when the load goes under a certain threshold. This threshold is dictated by the up-threshold minus a down-differential. By default they are 90 and 10. Triggering this condition we scale down into a dynamic frequency target capable of accommodating and dictated by the load level. In plain words, we can scale from max frequency immediately down to the lowest one. This will improve power consumption.
Ripped out the old GPU control interfaces and rewrote it with something new to accommodate the new logic. Your old scripts won't work anymore.
We now have 10 frequency steps to the user's disposition; defaults are: 54 108 160 266 350 440 533 640 733 800.
The new system interface targets can be found in /sys/devices/system/gpu/ .
- freq_table outputs a list of the current frequency table. You can use this interface for configuring the frequencies themselves in two ways:
Pair-wise target setting: echo 533 500 > /sys/devices/system/gpu/freq_table will change the 533 step frequency to 500.
Whole-table echo: echo 54 108 160 266 350 440 500 640 733 800 > /sys/devices/system/gpu/freq_table
In the above example you end up with the same end-result over the stock settings.
Valid clock frequencies are as follows: 54, 108, 160, 200, 266, 275, 300, 350, 400, 440, 500, 533, 600, 640, 666, 700, 733, 750, 800.
- volt_table outputs the voltages to the corresponding frequencies.
Pair-wise target setting: echo 533 1025 > /sys/devices/system/gpu/volt_table will change's 533MHz's voltage to 1025mV.
Whole-table echo in the same format as freq_table. Valid voltages are 600mV => x <= 1200mV.
- thresholds sets the two global threshold settings. echo 90 10 > /sys/devices/system/gpu/thresholds . Remember that the first is the up-threshold and the second is the down-differential. The down differential may not be higher than (99 - up value).
- min_freq and max_freq set the limits of the current DVFS policy. By default we're scaling from 160MHz to 440MHz (Same as stock).
echo 533 > /sys/devices/system/gpu/max_freq will enable the top limit to 533MHz and basically overclock the device.
echo 108 > /sys/devices/system/gpu/min_freq in the same way sets the lower limit.
25.3:
- current_freq shows the current frequency. This is if somebody likes to make a monitoring app or something.
- time_in_state shows the time spent in µS on each frequency step. Echo 0 to it (by default disabled) to disable it, 1 to enable monitoring, and any other numerical value to reset the timekeeping back to 0.
Perseus alpha24 (09/10):
Galaxy Note 2 source and kernel merge. Various platform fixes included from patching up from update5.
Fixed Mali GPU interface bugs relating to staycount, and lowered undervolt-soft limit down to 600mV.
5 step GPU scaling, for now. Change your scripts.
Fixed black crush on the display. Vastly better black levels are now of order.
Perseus alpha23 (27/09):
Changed some auxiliary CPU clock dividers for frequencies 1600,1704,1800 MHz. These frequencies should use less power now and also should be more easily reached with more stability or lower voltage depending on your device.
Fixed CPUPower driver (Back from alpha20); this will now skew the reported processing capacity of CPU0 in the lower frequencies up until 500MHz to be 8 times greater than CPU1-3, what it does now is that the scheduler will even more migrate tasks onto CPU0 to avoid idle wakeups on the remaining CPUs, resulting in increased power efficiency. For high load > 500MHz, the driver reverts back to the default power configuraitons.
Reset the regulator configurations to their physical minima; you can now undervolt to 600mV on the GPU. Sorry I missed this before.
New feature: Dynamic Screen Frequency Scaling.
This decreases the display controller frequency in tandem with the CPU speed. Usually when you have low activity on the screen; i.e. low re-draw rates, then you mostly also have logically low CPU load. I wrote a scaling mechanic to switch between high display frequency (60Hz), and low display frequency (40Hz) in accordance to CPU scaling. This is tied in in the CPUFreq governor, in this case PegasusQ. We have three new governor configurables found in /sys/devices/system/cpu/cpufreq/pegasusq/ (Or alternatively just use SetCPU):
lcdfreq_enable: Enables or disables the mechanic, disabled by default.
lcdfreq_kick_in_down_delay: The amount of samples to wait on below the threshold frequency before entering low display frequency mode. Default value is 5 for now, a.k.a. in most cases 250ms unless accelerated flexrate is active on low load (fingers touching the screen), then depending on situation it might get as low as 62.5ms.
lcdfreq_kick_in_freq: The frequency threshold below which the low display frequency kick-in will be active. Default is 500MHz, and should probably stay as such, setting it higher will cause lags as we'd be using 40Hz in an interactive situation.
For the curious: I made a rudimentary time_in_state state accounting sysfs in /sys/devices/platform/samsung-pd.2/s3cfb.0/graphics/fb0/lcdfreq/time_in_state for testing purposes. Currently it shows wrong time values for 60Hz as the driver gets initialized before the high resolution timer, and I'll fix that later, but the 40Hz time statistics are correct.
Notice: There will be now conflicts between this and user-space controlled TwDVFS service/app. The service would limit screen frequency to 40Hz while using the camera app, this will be now overridden. I also thought the service would do more but I could not find it scaling for anything else than the camera, so it's pretty much useless in my mind, and you could theoretically remove it.
Feedback 23.3: This feature causes flickering on bright colours and low brightness. Enable it at your own will.
Changed the functionality to boost to 60Hz on any touch interaction, regardless of CPU speed.
Please provide feedback on fluidity and battery life.
Perseus alpha22 (22/09):
Update to update5 source code. Only compatible with Samsung Jellybean ROMs.
Stacks with my previous memory changes: total memory: 857mB for now.
Implemented timer slack controller.
Backported the scheduler NoHz load computation fixes, this should dramatically improve PegasusQ's hot-plugging decision making.
Further reduced Mali sampling rate down to 50ms and changes the default thresholds to more aggressive power savings and clear-cut scaling. Removed 10ms regulator switching latency. I measured a 10% battery improvement in GLBenchmark 2.1 Egypt Battery - 50% Brightness 60 FPS.
config.gz support.
Alpha21 is the same as above but without update5 and for ICS. This is the last kernel for ICS, I'll not longer support it.
Perseus alpha20 (9/09):
Gökhan Moral's port of Voodoo Sound implemented. Currently no configuration interface is available, so if you wish to play with the settings, refer to the sysfs interfaces in /sys/class/misc/scoobydoo_sound/ . If you wish to change the device name, you must do echo 0 > /sys/class/misc/scoobydoo_sound_control/enable , followed by an echo output to the same file with the target device driver name. You can use this to change the device path to /sys/class/misc/voodoo_sound/ and sub-sequentially make a certain configuration application work. Please do not ask me for support on the latter. You can disable the sound modifications completely by the same method, by of course not re-enabling it afterwards.
Changed the Wifi packet filter to block out all but mDNS multi-cast packets.
Increased mmc timeout for bad quality SD cards.
Perseus alpha19 (1/09):
Updated Samsung source base up to update4, includes changes to the Wifi driver and various other small fixes
Added ARM topology support for the scheduler to be able to use sched_mc levels. This should increase cpu idle power consumption by decreasing idle wake-ups. For the moment disabled by default, and cpu_power doesn't seem to correctly work.
Swap support.
mDNIe sharpening improvement, courtesy of hardcore.
Decreased Mali utilization timeout to 100ms down from 1s which improves reaction time on instant GPU loads (Lock screen is best example).
New valid GPU frequencies : 54, 108, 160, 200, 266, 275, 300, 333, 350, 400, 440, 500, 533, 600, 640, 666, 700 Mhz
Increased user-space memory by 48mB to have a total of 825mB useable RAM; this comes from reduced DMA memory spaces on the part of:
- The Mulfi Function Codec a.k.a. the hardware decoding and encoding unit memory space from 50176kB to 28672kB
- The camera interface imaging subsystem from 12080kB to 10240kB
- The front-camera firmware block-space from 15360kB to 14336kB
- The ION heap size for the Video4Linux driver from 71680kB to 48128kB
In the case of the ION/V4L and MFC heap sizes I determined it by setting a benchmark for all the HD sample videos listed here to not have any detrimental effect before and after the changes. Below 41mB is the size for which the Planet Earth birds scene at 1080p high profile 4.1 40mbps video starts to lag. Keep in mind that there is no way this would be considered normal quality as this is basically un-recoded Blu-Ray quality and most videos are vastly under this bit-rate.
I note that I also haven't found any detriment in use of the cameras including the modded 30mbps camera quality.
Disabled the Kies daemon, I see no point in it and it uses up memory uselessly. Obviously Kies won't work any-more, if you want you can start the service yourselves manually.
Perseus alpha18 (11/07):
Updated Samsung source base up to update3, includes various fixes to fuelgauge battery reporting on full charge, MHL code, video media drivers, Wifi driver updates, gyroscope, MAX77686 battery charger changes, increased max display brightness, a buttload of LCD panel changes, and changes to the pixel refresh rate driver (This thing is controlled by the TwDVFSapp by the way and decreases screen power consumption at runtime).
ro.secure=1 again now but with an insecure adbd as root included.
LFB ramdisk.
Compiled with Linaro 4.6.2 and some higher level optimizations.
Keep in mind that running the new kernel on older ROMs can cause some funny behaviour, so update your ROM if so.
Perseus alpha17 (9/07):
Rewrote flexrate request code for pegasusq: I apologize for releasing the previous version in the state that it was, shame on me.
Now upon receiving a flexrate request and active ones, the governor delays hot-plugging sampling logic so that accelerated sampling is being taken into account and hot-plug sampling is normalized for the standard sampling rate. All sub-samples are being averaged into a normal sized sample at the end of the normalized period. This no longer interferes with the runqueue read-outs as they were being reset too fast and generally accelerated hot-plugging in a bad manner.
Changed touchscreen flexrate requests to 12500µS sampling rates over 4 periods to synchronize with the default pegasusq sampling rate.
I consider this chapter to be done and a success as far implementing flexrates as a viable and working alternative to touch-boost to increase responsiveness without having the bad battery-life side-effects of the touch booster.
Performance governor is now core-aware, previously as no other hot-plugging logic was available, the governor would start with whatever number of online cores were available at that time and stay like that. This made Performance useless for it's designed purpose, that being bringing maximum performance. It now brings up all available cores online upon start and turns all additional cores back offline on governor stop. It is now by far the best and consistent governor for benchmarking.
Removed unused cpu_freq_up, cpu_freq_down, and several other flexrate related governor parameters in Pegasusq as they were either not used, or senseless.
Default Pegasusq parameters changed:
- Sampling-down factor reduced to 1 from 2, this caused reduced sampling speed upon reaching maximum frequency. It now scales (possibly down) faster.
- Frequency steps reduced from 40% to 21% of maximum frequency, this causes it to scale in 300MHz steps for the default maximum policy of 1400MHz. As we now have flexrates to scale faster I did not notice any negative effects on performance and this should help battery-wise on load-"spiky" applications, and in general.
- Increased runqueue-length thresholds for the hot-plugging logic by a flat 75 for all conditions. In my opinion and experience they were too low and caused to keep the cores needlessly online. This now reduces for "average low" use the online-time of the third core considerably.
- Increased the hot-plug frequency conditions for the 4th core.
Updated the kernel from upstream to 3.0.36.
Memcopy and string function improvements, won't bring any noticeable differences.
Compilier optimizations (Roughly the same as Ninphetamine's) are now in. VFP uses the NEON libraries now. I couldn't measure any increase in any synthetic benchmarks with this though.
LFB exFat modules.
Perseus alpha16 (3/07):
Disabled touchscreen touch booster; this previously locked the CPU frequency at 800MHz, memory interface to 400MHz and bus frequency to 200MHz at any time the finger touched the screen.
Implemented flexrate capability into pegasusq; additionally added a frequency threshold above which flexrate requests are ignored. Currently this is set at 800MHz but is configurable in the governor tunables.
Enabled quality of service requests in the touchscreen driver, this currently triggers a flexrate request at a sampling period of 15ms over the governor default of 50ms, and over 5 periods, giving 75ms of heightened reactivity. It also sends a direct memory access throughput quality of service request to the the linux power management quality of service interface to guarantee a 266MHz bus frequency for 142ms. Still need to check if that the last part works correctly.
Perseus alpha14 (21/06):
Only Mali platform changes.
Remove Samsung integrated checks on in the Pegasus platform that prevented the GPU control interfaces to work. Overclocking, undervolting, and the rest now properly work.
Removal of the CPU frequency lock to 1200MHz if the GPU is at 440MHz, this is excessive as 3D load heavy applications usually do not tax the CPU that far, and is an unnecessary power consumption burden.
The thermal control unit temperature throttling causes to fix the voltage to a fixed value when throttling is in place; this is useless considering frequency is not limited, making the whole thing senseless. Thus removed.
Perseus alpha13 (20/06):
Rebased sources on a Linux branch for commit completedness. All commits reapplied and cleaned. New repo.
CIFS included as module
Busybox removed. This should be part of the ROM.
Perseus alpha12 (14/06):
Added enhanced init.d support as per dk_zero-cool's implementation.
SHA-1 improvements
Added exception to the module loading logic for the exFat driver module thus making it work. (Credit to gokhanmoral)
Perseus alpha11 (10/06):
ro.secure=0
Recovery renamed as busybox in /sbin. I'll compile a proper busybox later on, or remove it alltogether when a recovery with autoinstall is released by CF or somebody else.
Perseus alpha10 (8/06):
Overclocking up to 1800MHz. Voltages in ASV table are somewhat scaled up until 1600MHz, after that you're on your own and have to optimize yourself.
Intel claims maximum sustainable safe voltage for 32nm HKMG to be 1.4V, above that may cause electron migration to the silicon and permanently deteriorate your chip. 1700 and above only for avid overclockers and benchmark freaks. Credit to tvanhak for playing lab rat with his phone.
Samsung frequency limitation removed to scale above 1400MHz, full credit goes to Gokhanmoral for finding this hack in the kernel as it is in a very sneaky location.
Perseus alpha7 (5/06):
Reduced regulator voltage initialization minimum to 600mV, you can now undervolt that far. Be aware of crashes.
Added SIO scheduler
Some network and CRC related patches
Perseus alpha6 (4/06):
UV_mV_table support, apps like SetCPU work now.
If you have a voltage set at for example 1187500µV the output will be rounded up to be displayed at 1188mV. If you set a voltage non multiple of 12.5mV then for example, 1190mV, it will round it to the nearest valid step, being 1187.5mV. UV_uV_table is there for finer grained control but no app suports that yet.
Perseus alpha3 (4/06):
Mali: disable state tracking
Mali: GPU frequency, scaling and voltage control
Governor pegasusq: make up_threshold_at_min_freq and freq_for_responsiveness configurable values. This is the reason the Galaxy S3 is so smooth, it has super aggressive scaling values for the governor until default 500MHz.
Enabled 1500MHz per defconfig and added voltage values to ASV table for it
Added UV_uV_table for voltage control on the CPU; this is not compatible for any programm which supports undervolting right now, we need UV_mV_table for that and since we have 12.5mV steps being fed to Vdd it's not compatible for now.
Boot partitions are made visible.
Knowledge base
I'm going over time to update this post with some informations. It may be unsorted, unfinished or un-editorialized for the time being.
2) Hardware
The Galaxy Note 2 will be coming out with a new 4412 versioned Rev 2.0, where as the one currently in the S3 is versioned Rev 1.1. The new chip will be launched at 1.6GHz default clock. What is interesting is that they have increased the base clock from 800MHz to 880MHz, most of the SoC internals feed off this clock, meaning that we're going to have 10% clock boost in the internal bus and memory speeds.
Now as a side note: One thing that I haven't understood from the press releases back in May, is that there were this "internal 128bit bus" mentioned, with some idiotic websites taking that tidbit and claiming the chip was a 128bit architecture. Whatever. Anyway, the reason for this is that the way the Samsung SoCs internally function: they are separated in a "left bus" and a "right bus". The left bus is connected to the memory controllers and is also just called the MIF/Memory Interface. The right bus is called the "internal bus" and is connected to the ARM cores and everything else. The biggest difference here between the 4412 and the previous Samsung iterations was that both these were running at the same clock. In the 4412 the internal bus is running at half the memory interface bus, this corresponds to the increase to 128bit in the internal bus.
Now I got curious due to all this talk about the A6 and this tidbit:
"K3PE7E700F-XGC2" the last two characters refer to the clock speed. The iPhone 4S was [under]clocked at 800 Mhz. "K3PE4E400B-XGC1" was the A5's part number. E4 refers to 2 Gb LPDDR2 die and because A5 features a dual-channel LPDDR2 memory with two 32-bit die. 2 GB x 2 = 512 mb of RAM. C1 was the clock speed which was 2.5ns which indicates a 400MHz clock frequency. Two channels result in the A5 clock speed of 800MHz. So the A6 has C2 which is 1.9ns which indicates a 533 MHz clock frequency. 533 x 2 is ~1066 GHz.
Click to expand...
Click to collapse
Both the A6 and 4412 use the same memory, only difference being what seems to be a revision serial character. I was talking a few months ago how the 4412 showed a good 30% bandwidth improvement over the 4210, and credited this to it running 1066mbps memory instead of 800mbps; but in reality that is not the case.
I went over the source code of the busfrequency driver in the S3, and found that actually there is an entry for the internal frequency to run at 266MHz (128bit), but that entry is disabled in the driver; because the memory interfaces don't exceed 400MHz. The bus speed is defined in (MIF/INT) pairs and top speed available is 400200 (400MHz memory, 200 internal). Well this is interesting we can overclock our device's memory then if there's headroom! Well that idea quickly faded as I found that the C2C (Chip-to-chip) interface to the memory isn't capable of being clocked to 533MHz because simply the C2C clock divider register simply doesn't allow a divider value needed for that frequency, only being able to run 400MHz(and lower) and 800MHz. Basically we can't use the fast memory because it seems the clock dividers don't allow it. Anyway, coincidentally the i9305 sources were released two days ago and it included all the Note 2 sources and so on, so what Samsung did was simply increase the MPLL base clock from 800 to 880MHz, actually increasing the frequency of a load of things like the camera interface and who knows what at the same time.
What this also means is that Samsung increased effective bandwidth by 30% without increasing the memory speed. This indicates much improved memory controllers, and also why it easily beats the Tegra 3 and others in memory benchmarks.
Another new addition to the REV 2.0 chip is that we'll be running 533MHz for the Mali clock by default. We were already experimenting with this on the S3 and pretty much made the GPU run up to 700MHz, of course, it gets quite warm and battery hungry, but it's neat nonetheless.
3) Reserved memory spaces
There is the current reserved memory space breakdown, with red as Perseus changes over stock:
#Secure spaces on fixed memory addresses
Front-camera firmware & heap: fimc0: fmic1 =
0x65800000 - 0x66700000 => 15360K (0xF00000) => 14336K
Multi function codec B memory space: mfc-normal =
0x64000000 - 0x64400000 => 4096K
ION device memory allocator reserved space: ion =
0x5F200000 - 0x63800000 => 71680K (0x4600000) => 48128K
Multi function codec device reserved space: device_mfc =
0x5C800000 - 0x5CA80000 => 2560K (0x280000)
Multi function codec A memory space (Virtually contiguous to MFC, practically has a physical memory hole): mfc-secure =
0x5C100000 - 0x5C800000 => 7168K (0x700000)
0x5F000000 - 0x5F200000 => 2048K (0x200000)
Bootloader: sectbl =
0x5C000000 - 0x5C100000 => 1024K (0x100000)
# non secure
Camera imaging subsystem: fimc_is => 12080K (0xBCC000) => 10240K
Display interface and frame buffer: fimd => 8192K (0x800000)
Main-camera firmware & heap: fimc0 => 62464K (0x3D00000)
Audio buffer: srp => 1024K (0x100000)
Good start dude, i will release my kernel in 2 days max too, just need to finish a few things and it's done
Sent from my Desire HD using Tapatalk 2
simone201 said:
Good start dude, i will release my kernel in 2 days max too, just need to finish a few things and it's done
Sent from my Desire HD using Tapatalk 2
Click to expand...
Click to collapse
Desire HD? Did you already get rid of your S2? Thanks. Do you have your device or also waiting for the blue one?
AndreiLux said:
Desire HD? Did you already get rid of your S2? Thanks. Do you have your device or also waiting for the blue one?
Click to expand...
Click to collapse
Haha yeah i sold it to buy a GS3, i ordered the white one from amazon.it but it is taking ages -.-"
BTW, look at my repo, i have done some great new mods if someone wants to use other govs than pegasusq (that is way better but you know, it's always good to have a choice)
Sent from my Desire HD using Tapatalk 2
Nice AndreiFlux let's test
Gesendet von meinem GT-I9300
simone201 said:
BTW, look at my repo, i have done some great new mods if someone wants to use other govs than pegasusq (that is way better but you know, it's always good to have a choice)
Click to expand...
Click to collapse
Great work. Personally I'm not going to allow anything other than Pegasusq though, I just don't see the point. The users can use your kernel if they want choice
AndreiLux said:
Great work. Personally I'm not going to allow anything other than Pegasusq though, I just don't see the point. The users can use your kernel if they want choice
Click to expand...
Click to collapse
Yeah you're right, that's why i will stay with pegasusq by default
My mods are good to use the cores as you want, like it was with Tegrak's 2nd Core
Sent from my Desire HD using Tapatalk 2
Hi
is a bootanimation possible with this kernel or is it in a future version planed?
Bootanimations on the S3 are supposedly in a proprietary format now, so we'll have to see about it. As said, for now it's baby steps as long as I'm not able to molest the flash counter on the device myself.
Wifi is not working on this Kernel
Kevinkuensken said:
Wifi is not working on this Kernel
Click to expand...
Click to collapse
Yes, me too...
+1
Same issue with wifi...
Kevinkuensken said:
Wifi is not working on this Kernel
Click to expand...
Click to collapse
I guess it boots well then! Reuploaded a new version for Wifi, please test if you want to.
AndreiLux said:
I guess it boots well then! Reuploaded a new version for Wifi, please test if you want to.
Click to expand...
Click to collapse
Strange, modules not loaded?
For me it worked perfectly from first build, using fully stock ramdisk
Sent from my Desire HD using Tapatalk 2
AndreiLux said:
I guess it boots well then! Reuploaded a new version for Wifi, please test if you want to.
Click to expand...
Click to collapse
Still no wifi with Alpha3.1
Mopral said:
Still no wifi with Alpha3.1
Click to expand...
Click to collapse
Same here
simone201 said:
Strange, modules not loaded?
For me it worked perfectly from first build, using fully stock ramdisk
Sent from my Desire HD using Tapatalk 2
Click to expand...
Click to collapse
Hmmm. I'm reverting to fully untouched ramdisk now, alpha3.2 uploaded.
Introduction
This is a kernel for XT1572/XT1575 built from stock sources (marshmallow-6.0.0-release branch) with cherry picks from other kernels and some ports/mods done by me. It started as a personal build tailored to my preferences but just thought I'd share in case somebody might find it useful. My main goal is building the smoothest kernel I can get so performance is top priority.
This kernel is for stock ROM MPH24.49-18*
Disclaimer
Although I have experience with Linux kernels on desktops and servers this is my first Android kernel. I've been running this kernel on my XT1572 for a few days and seems pretty stable but that doesn't mean it's risk free. In fact I wouldn't dare to install it if you don't have a proper backup and some basic skills to deal with unexpected situations.
Features
Aroma Installer
CPU profile scripts (see this)
Color control (KCAL)
Frandom
Updated to kernel version 3.10.101
Overclocking (a53: 1536MHz a57:2016MHz)
Underclocking (302MHz)
Additional CPU governors (ElementalX, Intelliactive, Lionheart, BioShock, BluActive, Wheatley, InteractiveX/Interactive, Impulse, Zzmoove)
Additional I/O schedulers (SIO, FIOPS, Zen, BFQ, SIOPLUS)
Bricked Hotplug
Updated ZRAM driver
Updated Lowmemorykill driver
Basic init.d support
KSM and UKSM
Voltage readings
Fsync on/off
Touchboost on/off
Vibration control
KEXEC Hardboot (MultiROM support)
Patched cdrom code (DriveDroid support)
DoubleTap2Wake/Sweep2Wake/Sweep2Sleep (EXPERIMENTAL)
Power efficient workqueues
Support for additional FS: NTFS, NFS, CIFS
Additional Xpad drivers (read this)
Device as USB trackpad/keyboard driver (read this)
WiFi module optimizations
Many minor optimizations
Optimization flags
UBER Toolchain 4.9
Installation instructions
Download ZIP and flash from TWRP/Flashify. Read the following notes carefully before flashing.
Important notes:
This kernel is still experimental, make a proper backup first
You need to be rooted
DO NOT play with DT2W/S2W before reading the release notes and the update
In case you want to tune some parameters (ie: CPU frecuencies) I recommend you install EX Kernel Manager, Kernel Adiutor or Kernel Adiutor-Mod.
If you're using Kernel Adiutor to control vibration or TCP congestion read this.
Questions? Read the FAQ before posting.
Download
Latest version is v0.14 (see release notes)
https://www.androidfilehost.com/?w=files&flid=49225
Donations
Although quite a deal of the important work has been done by the developers mentioned in the Credits section I spend many hours working on this. If you feel like helping me out I'd appreciate some tiny donations to cover some minor expenses.
Thanks to all of you who have donated, it's very much appreciated.
Profiles
One of the FAQ in most kernel related threads is "What are the best settings for .....?". This is the 10 million question since the usage pattern can be very different for each user. However, I understand less experienced users will appreciate some hints in this department, so that's why I'm posting some basic settings you can use as a starting point.
It's your job to further tune them to suit your needs. You should be able to modify these settings with whatever Kernel Control App you like the best, although not all settings are available in every app, in such a case tune those you can. The list is not complete (just the most importante settings) and is loosely based on Kernel Adiutor arrangement.
Please, keep in mind these are subjective values (based of personal preferences or popularity) and some people might like other settings for whatever reasons.
Performance Profile: Very smooth and responsive but average battery life
CPU
LITTLE Cluster
CPU Governor: bluactive
CPU Max Frequency: 1536MHz
CPU Min Frequency: 302MHzBIG Cluster
CPU Governor: bluactive
CPU Max Frequency: 2016MHz
CPU Min Frequency: 302MHz
NOTE: If you get N/A or weird values when trying to change settings on BIG cores it means both have been hotunplugged. To work around this select "performance" governor, make your desired changes and then select you previous governor.CPU Boost
Input Boost Frequency Core 1: 960MHz
Hotplug
MSM MPDecision
Minimum CPU online: 2
Maximum CPU online: 6
Max Cores Screen Off: 2
Idle Frequency: 384MHz
Thermal
Core Control: Off
VDD Restriction: Off
Temperature Throttle: On
GPU
Max Frequency: 600MHz
Min Frequency: 180MHz
Govenor: cpufreq
I/O
Scheduler: noop
Read-ahead: 1024KB
Balanced Profile: Above average battery life with good performance on most situations
CPU
LITTLE Cluster
CPU Governor: interactive
CPU Max Frequency: 1440MHz
CPU Min Frequency: 302MHzBIG Cluster
CPU Governor: interactive
CPU Max Frequency: 1632MHz
CPU Min Frequency: 302MHz
NOTE: If you get N/A or weird values when trying to change settings on BIG cores it means both have been hotunplugged. To work around this select "performance" governor, make your desired changes and then select you previous governor.CPU Boost
Input Boost Frequency Core 1: 960MHz
Hotplug
MSM MPDecision
Minimum CPU online: 2
Maximum CPU online: 5
Max Cores Screen Off: 2
Idle Frequency: 768MHz
Thermal
Core Control: Off
VDD Restriction: Off
Temperature Throttle: On
GPU
Max Frequency: 600MHz
Min Frequency: 180MHz
Govenor: msm-adreno-tz
I/O
Scheduler: noop
Read-ahead: 1024KB
Battery Profile: Good battery life at the expense of somewhat limited performance
CPU
LITTLE Cluster
CPU Governor: ondemand
CPU Max Frequency: 1440MHz
CPU Min Frequency: 302MHzBIG Cluster
CPU Governor: ondemand
CPU Max Frequency: 1632MHz
CPU Min Frequency: 302MHz
NOTE: If you get N/A or weird values when trying to change settings on BIG cores it means both have been hotunplugged. To work around this select "performance" governor, make your desired changes and then select you previous governor.CPU Boost
Input Boost Frequency Core 1: 960MHz
Hotplug
MSM MPDecision
Minimum CPU online: 1
Maximum CPU online: 3
Max Cores Screen Off: 2
Idle Frequency: 960MHz
Thermal
Core Control: Off
VDD Restriction: Off
Temperature Throttle: On
GPU
Max Frequency: 450MHz
Min Frequency: 180MHz
Govenor: simple_ondemand
I/O
Scheduler: noop
Read-ahead: 1024KB
Thanks To/Credits
vadimtk
flar2
franciscofranco
nimrodsv
anarkia1976
savoca
myfluxi
AudioGod
osm0sis
nychitman1
jollaman999
imoseyon
showp1984
HashBang173
neobuddy89
rehpyc
Alcolawl
soniCron
Spasticdroid
XDA:DevDB Information
Frankenclark, Kernel for the Moto X Style (Pure)
Contributors
dirtyhank
Source Code: https://github.com/dirty-hank/frankenclark/
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: 0.14
Created 2016-01-10
Last Updated 2016-10-11
Changelog
v0.14 (2016-08-29)
Proper KCAL control (thanks to @Spasticdroid)
Updated xpad driver for compatibility with gamepads/controllers (thanks to @Spasticdroid)
Driver to use device as USB trackpad and keyboard (thanks to @Spasticdroid)
Misc minor updates (see github)
100Hz version uses stock compiler flags
v0.13 (2016-06-21)
Update to Linux Kernel 3.10.102
Misc minor updates (see github)
New start-up CPU governor profiles: bluactive, maddog and silverfish
v0.12 (2016-05-15)
Disable DT2W/S2W while phone call is in progress
New CPU governors: impulse, zzmoove
New and updated CPU profile scripts
Runtime CPU profile switcher script (see release notes)
Minor changes to Aroma installer
v0.11.1 (2016-05-01)
Aroma Installer update (see release notes)
v0.11 (2016-04-27)
Aroma Installer
Better camera focus
Less CPU usage from DT2W/S2W
Minor updates and bugfixes
v0.10 (2016-04-03)
Updated lowmemorykiller driver
BFQ and SIOPLUS I/O schedulers
Updated ZRAM driver (on by default)
User togglable WLAN wakelocks
Basic init.d support (see release notes)
Misc minor updates
v0.9 (2016-03-20)
Update to Linux Kernel 3.10.101
Bug fixes
Changes from Google update to N5X and N6P (see release notes)
v0.8 (2016-03-06)
Update to Linux Kernel 3.10.99
Power efficient workqueues
NTFS support
NFS and CIFS support (you'll probably need additional user space binaries)
v0.7.1 (2016-02-28)
Workaround for the dimmed screen upon unlock bug when DT2W/S2W is enabled
v0.7 (2016-02-21)
Hotplug thresholds tuned to keep BIG cores offline more often
KEXEC Hardboot (MultiROM support)
Patched cdrom code (full DriveDroid support)
DoubleTap2Wake/Sweep2Wake/Sweep2Sleep (HIGHLY EXPERIMENTAL, Read this)
v0.6 (2016-02-07)
Vibration control (non-haptic)
Relaxed CPU macros for better power usage
File hosting now on AndroidFileHost
v0.5.2 (2016-02-03)
Fixed USB and WiFi Tethering
Minor tweaks
v0.5.1 (2016-02-01)
Changes to installer
v0.5 (2016-01-31)
Update to Linux Kernel 3.10.95
InteractiveX governor (as patches to the interactive gov)
Bricked Hotplug
KSM and UKSM (disabled by default, use Kernel Adiutor to enable)
Many minor optimizations
WiFi module optimizations
Modules recompilation
Disabled core_ctl (due to broken module after some internal changes to kernel)
Voltage readings (any attempt to modify values is silently ignored)
v0.4.1 (2016-01-24)
Prevent msm_performance from messing with the user selected min/max CPU frequencies
v0.4 (2016-01-23)
New CPU governors (ElementalX, Intelliactive, Lionheart, BioShock, BluActive, Wheatley)
New I/O scheduler (Zen)
Default I/O scheduler set to noop with a read ahead of 1024kb
Fixed bug CVE-2016-0728
Minor optimizations
Introduce ZIP installer (Anykernel2)
v0.3 (2016-01-18)
Color control (KCAL)
frandom support
New optimization flags
ZRAM disabled by default
v0.2 (2016-01-14)
Updated to Linux kernel 3.10.94
Underclocking (302MHz)
v0.1 (2016-01-10)
First public version
FAQ
I get random reboots, what is happening?
This kernel overclocks both clusters by default (a53: 1536MHz a57:2016MHz) and although this is very safe for most devices some CPUs are in the lowest spot of the binning spectrum and can't handle O/C very well. In such a case use a kernel control app (see the OP for references) to limit the maximum CPU frequencies, play with them until you find stable values for your device.
What are the best settings for battery life/performance/whatever?
That's hard to tell as every user is different. You can find some basic profiles in the OP you can use as a starting point. Notice the differences between then and build you own.
Why do some BIG cluster settings display N/A?
Why can't I change some settings on the BIG cluster?
If you get N/A or weird values when trying to change settings on BIG cores it means both are offline ("hotunplugged"). To work around this select "performance" governor, make your desired changes and then select you previous governor. You can also disable hotplug, make the changes, and enable hotplug again.
DoubleTap2Wake doesn't work sometimes. How can I get it to work all the time?
When device goes into suspend mode first tap is often missed (I suspect this is caused by Moto Sensor Hub). If you tap three times and get the timing right you'll probably make it work most of the time. As an alternative, Sweep2Wake works almost all the time
DT2W/S2W is acting weird or disabling itself
Make sure Moto Display is disabled. Open the Moto app, click on the stars in the top right corner, select Display and set to Off
Can I use this kernel in ROM X/Y/Z?
This is for stock ROM MPH24.49-18 only. It'll probably work on any stock based ROM but not guaranteed.
I use stock ROM but WiFi is not working
Due to some internal changes all modules had to be recompiled (WiFi included). In order to expose the new modules without modifying the system partition I had to implement a hack that requires root. Make sure you're properly rooted.
What's the deal with ZRAM?
ZRAM is a technique to increase memory available to the apps at the expense of CPU time. Memory space from apps not being used is compressed into a memory swap area and uncompressed on the fly whenever needed. As you can imagine this compress/uncompress process burns CPU cycles, potentially leading to worse battery life, lag and higher temperatures. Since this device comes with 3GB I can only think of one scenario where ZRAM can be beneficial: heavy multitaskers who care more about apps not reloading than battery life. For the rest of users enabling ZRAM doesn't make much sense in my opinion, and that's why it's disabled by default.
UPDATE: v0.10 includes an updated ZRAM driver that improves performance significantly. So much so that the benefits seem to outweigh the costs and it's been enabled by default.
What's the deal with KSM/UKSM?
Since many apps use the same libraries/resources it's very likely that at any given time there are multiple copies of the same data on different memory locations. KSM/UKSM tries to take advantage of that fact by scanning memory pages periodically and consolidating that multiple copies into a single shared copy. Much as like ZRAM it can have a good effect on heavy multitasking performance but at the expense of CPU cycles, and thus it's only recommended in the same scenario as ZRAM. Disabled by default
Ok, so do I enable ZRAM/KSM/both/neither?
I honestly think most users will be better off not using neither. If you feel like you need extra RAM I'd try KSM first, then ZRAM. Using both at the same time is overkill unless you are an ultra multitasker, in which case you should probably get a 4GB device anyway
How do I get WiFi on 6.0.1?
It's a modem version mismatch issue, you need to downgrade the modem. See this post.
Love to see more options! Thanks for sharing!!
Yeah this will be very good
Only One think that would be awesome try to implement the double tap to wake
Awesome! More custom kernels are always welcome are there many governors to choose from?
krohme said:
Awesome! More custom kernels are always welcome are there many governors to choose from?
Click to expand...
Click to collapse
Right now only the stock governors are available but I plan on adding a few
Can't we install it through twrp???
guraki said:
Can't we install it through twrp???
Click to expand...
Click to collapse
Yes, TWRP supports boot image flashing
I lost root after the kernel install....
---------- Post added at 03:22 PM ---------- Previous post was at 02:39 PM ----------
Seems to work fine!!! Any battery life expectations?
guraki said:
I lost root after the kernel install....
---------- Post added at 03:22 PM ---------- Previous post was at 02:39 PM ----------
Seems to work fine!!! Any battery life expectations?
Click to expand...
Click to collapse
As I said on the OP my main goal is performance/smoothness, so I haven't specifically sought better battery life. That being said I'm getting about the same battery life as stock with better performance, that works for me.
Nevertheless, I'm very interested on how it works for other configurations and usage patterns.
@dirtyhank could you please add hotplugging to the kernel? Preferably one that allows you to select how many cores to run as well as which ones, as in run the two A57s and turn off the four A53s. Currently I'm running two A53s at 1.2Ghz and the remaining four cores are always off.
The screenshot is from Lolipop, and it is the only reason why I havent upgraded to MM. Turning off cores definitely makes a difference on battery life.
Also, if possible, adding a lower speed to the min speed. Will gladly test anything you thow my way. Thanks in advance.
Is there any chance for a CM13 version and a DT2W fork from elementalx?
sir-harlekin said:
Is there any chance for a CM13 version and a DT2W fork from elementalx?
Click to expand...
Click to collapse
DT2W maybe, CM13 unlikely.
very nice thank you! slowly slowly we getting more and more things. Just making sure this is only for stock based rom/s Thanks!!
cerobles1 said:
@dirtyhank could you please add hotplugging to the kernel? Preferably one that allows you to select how many cores to run as well as which ones, as in run the two A57s and turn off the four A53s. Currently I'm running two A53s at 1.2Ghz and the remaining four cores are always off.
The screenshot is from Lolipop, and it is the only reason why I havent upgraded to MM. Turning off cores definitely makes a difference on battery life.
Also, if possible, adding a lower speed to the min speed. Will gladly test anything you thow my way. Thanks in advance.
Click to expand...
Click to collapse
What kernel are you using on LP?
patt2k said:
very nice thank you! slowly slowly we getting more and more things. Just making sure this is only for stock based rom/s Thanks!!
Click to expand...
Click to collapse
Yep, stock ROM, I'll edit the OP
dirtyhank said:
Yep, stock ROM, I'll edit the OP
Click to expand...
Click to collapse
Awesome gonna flash this soon
I hope a port for CM based roms might be possible in the future! Thanks for sharing your work and replying so quickly!
dirtyhank said:
Yep, stock ROM, I'll edit the OP
Click to expand...
Click to collapse
Getting bootloop on TruePure rom 2.4. Anything I can try to avoid bootloops?
This thread is all about kernel things. I will be trying to provide a brief explanation regarding most of the features & options available in custom kernels. There are two custom kernel which are maintained for our device.
Disclaimer: I in no way claiming that information available in this thread is 100% correct.
Brief History about these custom kernels.
1. Chimera Kernel by rupanshji
This is a custom kernel based on Nichcream & Team Reloaded’s kernel source code with features added by the developer. This kernel has spectrum support. Talking about updates, Chimera is not updated frequently.
Source Code | Thread
Download link: Google Drive | Older Builds
2. Jasper Kernel by Pawan.S 5277!
This is a custom kernel based on msm-3.18 kernel source code with features and patches added by the developer. Jasper is updated whenever a new CAF tag is available (as mentioned in OP & what I have noticed).
Source Code | Thread
Download link: AndroidFileHost | MediaFire
3. Spicy Kernel by DyWN
Temporarily discontinued.
Kernel Managers
EX Kernel Manager
Kernel Auditor
Features and Options available in at-least one of the custom kernels mentioned above are mentioned below along with a brief description about them.
GOVERNORS
1. Alucard: This govenor is based on ondemand but has been heavily tweaked to bring better battery life and performance. It has been known to be battery friendly without sacrificing much performance.
2. Blu_active: A governor developed by eng.stk (featured in his Code_Blue kernels) based on interactive with upstream caf patches and ondemand governor bits too. This governor is mainly focused on performance like the other things the developer creates but it is also well balanced for gaming and general usage.
3. Clarity: Basically this from interactive CAF with additional tunables and tweaks. such as: Remove boost functional - Limit max frequency when screen off. Using relation CPU frequency Current (C) (Low power as possible). - additional down load tunable.
4. Conservative: This governor biases the phone to prefer the lowest possible clock-speed as often as possible. In other words, a larger and more persistent load must be placed on the CPU before the conservative governor will be prompted to raise the CPU clockspeed. Depending on how the developer has implemented this governor, and the minimum clockspeed chosen by the user, the conservative governor can introduce choppy performance. On the other hand, it can be good for battery life.
The Conservative Governor is also frequently described as a "slow OnDemand". The original and unmodified conservative is slow and inefficient. Newer and modified versions of conservative (from some kernels) are much more responsive and are better all around for almost any use.
5. Darkness: It's based on nightmare but more simple and fast, basic configs but very complex structure. It is an updated nightmare gov and improved stability, so far it is quite stable in tests.
6. Electron: This is a governor based on interactive from the latest MSM8994 CAF branch with more upstream improvements, powersave bias, screen off max frequency, and some other tweaks to improve battery life without hindering performance.
7. Interactive: This governor scales the clockspeed over the course of a timer set by the kernel developer (or user). In other words, if an application demands a ramp to maximum clockspeed (by placing 100% load on the CPU), a user can execute another task before the governor starts reducing CPU frequency. Because of this timer, Interactive is also better prepared to utilize intermediate clockspeeds that fall between the minimum and maximum CPU frequencies. It is significantly more responsive than OnDemand, because it's faster at scaling to maximum frequency.
Interactive also makes the assumption that a user turning the screen on will shortly be followed by the user interacting with some application on their device. Because of this, screen on triggers a ramp to maximum clockspeed, followed by the timer behavior described above.
8. Lisi: This governor is less aggressive and works similar to Alessa. This driver adds a dynamic cpufreq policy governor & designed for latency-sensitive workloads. The governor does a periodic polling and changes frequency based on the CPU utilization.
9. Nightmare: A PegasusQ modified, less aggressive and more stable. A good compromise between performance and battery. In addition to the SoD is a prevention because it usually does not hotplug.
10. Ondemand: This is one of the original and oldest governors available on the linux kernel. When the load placed on your CPU reaches the set threshold, the governor will quickly ramp up to the maximum CPU frequency. It has excellent fluidity because of this high-frequency bias, but it can also have a relatively negative effect on battery life versus other governors. OnDemand was commonly chosen by smartphone manufacturers in the past because it is well-tested and reliable, but it is outdated now and is being replaced by Google's Interactive governor.
11. Performance: The performance governor locks the phone's CPU at maximum frequency.
12. Powersave: The opposite of the Performance governor, the Powersave governor locks the CPU frequency at the lowest frequency set by the user.
13. Schedutil: This is a new EAS governor found in recent versions of the Linux Kernel (4.7+) that aims to integrate better with the Linux Kernel scheduler. It uses the kernel's scheduler to receive CPU utilisation information and make decisions from this input. As a direct result, schedutil can respond to CPU load faster and more accurate than normal governors such as Interactive that rely on timers.
14. Userspace: This governor, exceptionally rare for the world of mobile devices, allows any program executed by the user to set the CPU's operating frequency. This governor is more common amongst servers or desktop PCs where an application (like a power profile app) needs privileges to set the CPU clockspeed.
CPU Scheduler options... Search yourself.
THERMAL
1. Msm thermal is a kernel platform driver which regulates thermal conditions on the device during kernel boot. The goal of MSM_THERMAL is to prevent the temperature of the system from exceeding a thermal limit at which it cannot operate. Examples are CPU junction thermal limit, or POP memory thermal limit. The MSM_THERMAL driver polls the TSENS sensor hardware during boot, and reduces the maximum CPU frequency allowed in steps, to limit power/thermal output when a threshold temperature is crossed. It restores the maximum CPU frequency allowed in the same stepwise fashion when the threshold temperature (with hysteresis gap) is cleared.
2. Core Control Enable / disable throttling, this enables the thermal engine and enable VDD restriction and core throttle.
3. VDD Restriction Limits CPU voltage, limiting it will decrease temperature.
HOTPLUG OPTIONS
1. AiO_hotplug: An all in one HotPlug for Traditional Quad-Core and Hexa/Octa-Core big.LITTLE SoCs.
2. Autosmp: A highly-efficient hotplug driver, works in-sync with the CPU governor to enable off-line cpu cores when the the CPU frequency reaches a high threshold and still more compute power is needed. Therefore, touch boost bloat is removed.
GPU OPTIONS
Min GPU Freq: 216Mhz Max GPU Freq: 500 Mhz
GPU Governor:
1. msm-adreno-tz: The default GPU governor used by Qualcomm for their adreno GPUs. It is based on the ondemand governor but is biased towards performance, therefore it should give better performance in games but less battery life.
2. Performance: As the name suggests, this keeps your GPU running at the max frequency. This is a governor if you want the best possible experience in games but you don't care about your battery life.
3. Powersave: Like the CPU governor, this keeps your GPU running at the lowest possible frequency. Best battery life, extreme lag in games.
4. Simple_ondemand: As the name implies, it is a simpler version of the CPU governor ondemand. simple_ondemand will ramp up the frequency when a load is detected. It has a good balance between performance and battery savings.
Note: There are many other broken GPU Governors. Do not select them. If you are using Chimera, then your device will reboot if you try to select them.
GPU Boost: If you are using msm-adreno-tz governor, then you can configure GPU boost option also. Use ExKM to configure this additional option.
Adreno Idler: It is an idling algorithm, an efficient workaround for msm-adreno-tz's overheads. Main goal is to lower the power consumptions while maintaining high-performance. Since msm-adreno-tz tends to *not* use the lowest frequency even on idle, Adreno idler replaces msm-adreno-tz's algorithm when it comes to calculating idle frequency(mostly by ondemand's method). The higher frequencies are not touched with this algorithm, so high-demanding games will (most likely) not suffer from worsened performance.
COLOR CONTROL
Self-explanatory
SCREEN OPTIONS
Backlight Dimmer: Enable only at night times.
GESTURE OPTIONS
1. DoubleTap2Wake
2. Sweep2Wake
3. Sweep2Sleep
All of them are self-explanatory
Pro tip: Use KA if using chimera or ExKM if using Jasper to configure gesture options.
GESTURE VIBRATION
You can the intensity of vibration for the gestures.
VOLTAGE
You can decrease or increase the voltage globally or per core by adjusting the values.
Pro tip: Just don’t play with this unless you’re pro. AFAIK, both custom kernels have under-voltage values according to CPU cluster so doing further can for sure cause in-stability issues.
SOUND
You can decrease or increase the headphone digital gain, mic gain or speaker gain by configuring settings under sound tab.
MEMORY
Low Memory Killer: is a process killer, which is designed to work in cooperation with the Android Framework. Each process is assigned a special value by the Framework when started, the oom_adj value(oom_score_adj on newer kernels). This value defines how important the process is for the system(its priority), and thus how easily it can be killed. Values vary between -17 and +15(0 to 1000 for oom_score_adj). Higher values are given to less important processes which are killed first. Moreover, LMK defines 5 different categories for processes, each one containing processes with oom_adj/oom_score_adj in a specific range of values:
1. Foreground Applications: The application currently shown on the screen and running.
2. Visible Applications Applications that might not be shown on the screen currently, but are still running. They might be hidden behind an overlay or have a transparent window.
3. Secondary Server Services running in the background and needed for Apps to function properly. This category includes Google Play Services for example.
4. Hidden Applications Applications that are hidden from the user, but are running in the background.
5. Content Providers These are the services providing content to the system like contacts provider, location provider etc.
6. Empty Applications This category contains Applications that the user exited, but Android still keeps in RAM. They do not steal any CPU time or cause any power drain.
ZRAM OPTIONS
zRAM is just compressed RAM space. So you can store more in RAM by compressing the data you can fit more data inside your RAM.
Now obviously it is slower than actual normal RAM (since you have to encrypt and decrypt the data), but apparently it still is faster than using swap (which is in your internal memory rather than RAM). The principle works based on that Android prefers to keep data stored as much as possible in RAM to keep recently used apps running quickly. The more you use an app the more priority it has, therefore will stay in normal RAM, things you use sometimes but not very often are kept in zRAM (regardless of how full your actual RAM is), but since you don't use this very often you don't notice the performance hiccup of decrypting that data.
Then last case scenario things you barely use are kept in swap.
For you IT enthusiasts you should have realised already that "z" is the technology prefix for Compression. So it shouldn't come as a surprise that zRAM is compressed RAM.
zRAM Size: 1 GiB is a fairly balanced amount. According to Google, it is useful even on devices with 4 GB of ram because it helps reduce page cache
thrashing, or constant unloading and reloading of cached pages from disk.
zRAM Compression: lzo or lz4
VIRTUAL MEMORY OPTIONS
Dirty Ratio & Dirty Background Ratio: Most people say that these need to be high, so that more stuff is stored in Cache. This will make your phone quick. Because cache is quick. But in reality this is only good advice if all you need to load on your phone is the system UI. Because as soon as you start loading different apps this cache fills quickly, and whenever you want to open an app/file/webpage that is not in cache, your CPU is tasked with both emptying whatever is filling up cache memory and load your new app into cache. Thus making multitasking a nightmare within the first day. A simple reboot of the phone is not enough, nor is clearing RAM (Note: Cache is not RAM).
Overcommit Ratio: While increasing allows more multitasking, I recommend leaving this at 0. It keeps RAM from completely filling up, thus avoiding "app xxx not responding" issues.
I/O OPTIONS
I/O Scheduler:
1. BFQ: Instead of time slices allocation by CFQ, BFQ assigns budgets. Disk is granted to an active process until it's budget (number of sectors) expires. BFQ assigns high budgets to non-read tasks. Budget assigned to a process varies over time as a function of it's behavior.
2. CFQ: This scheduler maintains a scalable per-process I/O queue and attempts to distribute the available I/O bandwidth equally among all I/O requests. Each per-process queue contains synchronous requests from processes. Time slice allocated for each queue depends on the priority of the 'parent' process. V2 of CFQ has some fixes which solves process' i/o starvation and some small backward seeks in the hope of improving responsiveness.
3. Deadline: The goal of the Deadline scheduler is to attempt to guarantee a start service time for a request. It does that by imposing a deadline on all I/O operations to prevent starvation of requests. It also maintains two deadline queues, in addition to the sorted queues (both read and write). Deadline queues are basically sorted by their deadline (the expiration time), while the sorted queues are sorted by the sector number.
4. Fiops: This new I/O scheduler is designed around the following assumptions about Flash-based storage devices: no I/O seek time, read and write I/O cost is usually different from rotating media, time to make a request depends upon the request size, and high through-put and higher IOPS with low-latency. FIOPS (Fair IOPS) I/O scheduler tries to fix the gaps in CFQ. It's IOPS based, so it only targets for drive without I/O seek. It's quite similar like CFQ, but the dispatch decision is made according to IOPS instead of slice.
5. Noop: Inserts all the incoming I/O requests to a First In First Out queue and implements request merging. Best used with storage devices that does not depend on mechanical movement to access data (yes, like our flash drives). Advantage here is that flash drives does not require reordering of multiple I/O requests unlike in normal hard drives.
6. Maple: Maple is based on the Zen and Simple I/O schedulers. It uses ZEN's first-come-first-serve style algorithm with separate read/write requests and improved former/latter request handling from SIO. Maple is biased towards handling asynchronous requests before synchronous, and read requests before write. While this can have negative aspects on write intensive tasks like file copying, it slightly improves UI responsiveness. When the device is asleep, maple increases the expiry time of requests so that it can handle them more slowly, causing less overhead.
7. Sio: Simple I/O aims to keep minimum overhead to achieve low latency to serve I/O requests. No priority queue concepts, but only basic merging. SIO is a mix between Noop & deadline. No reordering or sorting of requests.
8. Zen: It is based on the Noop, Deadline and SIO I/O schedulers. It's an FCFS (First come, first serve) based algorithm, but it's not strictly FIFO. ZEN does not do any sorting. It uses deadlines for fairness, and treats synchronous requests with priority over asynchronous ones. Other than that, it's pretty much the same as Noop blended with VR features.
More info can be found here.
MISCELLANEOUS
TCP Congestion algorithm: Available choices are bic, cubic, lp, reno & westwood.
More info can be found here.
My recommendation: Try both custom kernel for atleast two days and then decide which suits your need. And use ExKM to configure Jasper as some of the options available in that kernel are not available in KA.
References: Source 1 | Source 2 | Source 3
Reserved
Thnx its very usefull to know about the governers
Nois tutorial!
Just a correction. You can use exKernel manager with chimera. I recommend KA to prevent piracy. Most of the peeps pirate exkernel manager usually.
rupanshji said:
Nois tutorial!
Just a correction. You can use exKernel manager with chimera. I recommend KA to prevent piracy. Most of the peeps pirate exkernel manager usually.
Click to expand...
Click to collapse
I mentioned KA for Chimera because when i tried this kernel, Wake gestures were working better with KA and not EX Kernel Manager.
If you want, I can amend OP according to your preference.
Nice good topic, thanks