Hello guys ,
Please help my Xiaomi Redmi Note 10 Global snapdragon 678 stuck at NV data is corrupted after I've flashed the latest MIUI 13. Now I can't boot into my OS . It always reboots to recovery mode . While searching in google I've found that it's caused by NON-HLOS.bin file . So I've found a NON-HLOS.bin on the internet and flashed it with minimal adb fastboot. After that I was able to boot into my OS . But the problem is I've NO Service even though my SIM card is detected. IMEI and baseband version is also ok. Also the fingerprint not working. I've also tried flashing a lower version like 12.5 but still no luck . So please guys help me with it. This is the only phone I have right now
My bootloader is Unlocked .
Hello,
You can always clean flash the latest Stable Fastboot via MiFlash.
I recommend formating the data but keeping bootloader unlocked.
spider1163 said:
Hello,
You can always clean flash the latest Stable Fastboot via MiFlash.
I recommend formating the data but keeping bootloader unlocked.
Click to expand...
Click to collapse
I did all that but it always keeps showing that "NV data corrupted " . But few hours earlier from now I've flashed the miui version 12.0.2.0 which seems to solve my problem . my phone started normally and everything got fixed. I think I can't update my phone anymore . When ever I update to new version of miui above 12.0.2.0 it always throughs me that error.
Are you sure you have a global version ?
What version is proposed when you try OTA update ?
spider1163 said:
Are you sure you have a global version ?
What version is proposed when you try OTA update ?
Click to expand...
Click to collapse
Yes . I have global version and OTA update suggest me miui 12.5.5.0 but when i hit the download button it download the update installs it then ask for a reboot . When i reboot then it again goes into recovery and shows me "NV data corrupted " . All I wanted is to update my android to latest version but I can't. I am stuck in that old version
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I suggest to backup data and clean flash latest version after formating data, then restore it
spider1163 said:
I suggest to backup data and clean flash latest version after formating data, then restore it
Click to expand...
Click to collapse
As I said in the post I tried to flash the latest version MIUI 13.0.10.0 through MiFlash . Even though the flashing completed successfully but I couldn't boot into the OS. It always reboot back to recovery mode showing the error "NV Data is corrupted " . I've also tried flashing lower version of the MIUI like 12.5.5 , 12.5.3 etc . but still can't boot into os. Only 12.0.2.0 version works in my device . I don't know what kind of problem is that .
omar404 said:
As I said in the post I tried to flash the latest version MIUI 13.0.10.0 through MiFlash . Even though the flashing completed successfully but I couldn't boot into the OS. It always reboot back to recovery mode showing the error "NV Data is corrupted " . I've also tried flashing lower version of the MIUI like 12.5.5 , 12.5.3 etc . but still can't boot into os. Only 12.0.2.0 version works in my device . I don't know what kind of problem is that .
Click to expand...
Click to collapse
Did you format the data ? (not wipe)
spider1163 said:
Did you format the data ? (not wipe)
Click to expand...
Click to collapse
Well MiFlash don't have a format or wipe option . I just flashed it according to the Xiaomi's official flashing guide.
Xiaomi Community
c.mi.com
omar404 said:
Well MiFlash don't have a format or wipe option . I just flashed it according to the Xiaomi's official flashing guide.
Xiaomi Community
c.mi.com
Click to expand...
Click to collapse
clean all option in miflash or flash_all.bat
devcon69 said:
clean all option in miflash or flash_all.bat
Click to expand...
Click to collapse
I did that brother that's why my bootloader is still unlocked
Did you try to wipe data again from recovery screen ?
spider1163 said:
Did you try to wipe data again from recovery screen ?
Click to expand...
Click to collapse
Yes I also did that but still the same error.
same problem happened to me, after updated nv data croupt, stucked on miui 12.0.2, then after flash Indonesian rom system boot sim detect but no network, this was a big problem, tryed to instal custom rom, eng rom but not work, then after a technician fix my problem with flashbox/usb dungle & charge couple of bucks, so why this problem happened? bcz your phone imei changed before, thats why you cannot update or flash letest rom,, but i'm in cr droid 7 Android 11, whice is very smooth & stable, old is gold,u can use it on miui12.0.2 framewere!
echo009 said:
same problem happened to me, after updated nv data croupt, stucked on miui 12.0.2, then after flash Indonesian rom system boot sim detect but no network, this was a big problem, tryed to instal custom rom, eng rom but not work, then after a technician fix my problem with flashbox/usb dungle & charge couple of bucks, so why this problem happened? bcz your phone imei changed before, thats why you cannot update or flash letest rom,, but i'm in cr droid 7 Android 11, whice is very smooth & stable, old is gold,u can use it on miui12.0.2 framewere!
Click to expand...
Click to collapse
Finally I've found a person who had same problem as me. I'm crying right now. I've literally posted everywhere just to know why it's happening. So how can I fix my problem?
Another thing is that when I flash miui 12.0.2.0 after "NV data is corrupted" my phone started working normally again . Why is that ? Why can't I flash other version except 12.0.2.0. If it's happening bcz my imei have changed before then it shouldn't be working even after I flash it with 12.0.2.0
I hate to necro this thread, but did you ever find a solution to this issue? I'm having the exact same problem with a Redmi Note 10S: I try to update the phone from MIUI 12 to MIUI 13 (directly through the device settings) once finished, the device reboots, then gets stuck on MIUI Recovery screen with a red text that reads "NV Data is Corrupted".
herbal-tea said:
I hate to necro this thread, but did you ever find a solution to this issue? I'm having the exact same problem with a Redmi Note 10S: I try to update the phone from MIUI 12 to MIUI 13 (directly through the device settings) once finished, the device reboots, then gets stuck on MIUI Recovery screen with a red text that reads "NV Data is Corrupted".
Click to expand...
Click to collapse
No brother. I haven't found solution till this day. I'm just stuck at miui 12 and can't upgrade from it. If you ever found any solution please knock me. It'll be a huge help.
Try flashing latest version via fastboot
spider1163 said:
Try flashing latest version via fastboot
Click to expand...
Click to collapse
Did that too but no luck. I need a way to restore my imei after flashing the latest rom. Do you have any tutorial or links which shows how to do that ?
My device info:
Redmi Note 10 (mojito)
Bootloader unlocked
Current miui : 12.0.2.0
have u tried xiaomi.eu rom ? does it boot ?
Related
Hi,
I can't get out of the bootloop of my Honor 7. Here below the history:
1) Unlock bootloader: Success
2) Install TWRP: Success
3) Install SuperSU 2.65: Fail
From this point i tried to recover from a new original rom with Multi-tool, but still bootloop. I also wipe all caches but still same issues. I don't know what to do as i have the feeling i tried everything already.
If someones could help me it would be nice. I still have access to bootloader (volume - & power) and I sometimes get access to TWRP but screen freezes, i can't go into any of the settings.
Thanks for your support!
Download full rom 121 if you are in LP or 320/330 if you are in MM.
Put the rom .app file into dload folder in the SDcard
Flash stock recovery,flash the rigth rom with vol+,+,vol-,+,pwr, the flashing will start automatly.
Upgrade to 180 or 330.
The files:
http://www.modaco.com/forums/topic/...ck-rom-images-updated-1st-april-2016-plk-l01/
Flamenawer said:
Download full rom 121 if you are in LP or 320/330 if you are in MM.
Put the rom .app file into dload folder in the SDcard
Flash stock recovery,flash the rigth rom with vol+,+,vol-,+,pwr, the flashing will start automatly.
Upgrade to 180 or 330.
The files:
http://www.modaco.com/forums/topic/...ck-rom-images-updated-1st-april-2016-plk-l01/
Click to expand...
Click to collapse
That won't work sadly, PLK-L01 is totally different than PLK-TL01H in terms of software.
The updates is also named differently compared to the European version, in the EU (and elsewere?) it's 180, 320, 330 etc. but on the PLK-TL01H it's 6.3.16, 6.4.1 etc.
Hi,
indeed Flamenaver the link you post is for PLK-L01 only.
Can i use one of these firmware instead which are original ones for PLK-TL01H?
http://emui.huawei.com/cn/plugin.php?id=hwdownload&mod=detail&mid=170
How does this VOL UP + VOL DOWN + Power works exactly? Do I need the press the 3 together until i see the upgrade starting or do I relesea as soon as I see HONOR Welcome Screen ?
Because it is not working if i keep the 3 pressed until something happens, because then it is restarting and restarting for ever.
On the other side, just pressing 3 for 10 seconds and couple of seconds after it powers on doesn't work neither.
Thanks for the support.
Tabithalos said:
That won't work sadly, PLK-L01 is totally different than PLK-TL01H in terms of software.
The updates is also named differently compared to the European version, in the EU (and elsewere?) it's 180, 320, 330 etc. but on the PLK-TL01H it's 6.3.16, 6.4.1 etc.
Click to expand...
Click to collapse
Try to install LP or MM full rom (no ota o zip roms),from stock recovery, with the standard process for your phone, is a universal unbrick procedure for soft_bricked phones.
I can't get access to stock recovery. I can reinstall Stock recovery from Honor Multi Tools but i can't get in it.
If i keep vol+ & Power or Vol+, Vol- & Power pressed i get onl the honor welcome screen bootloop, nothing else
Hi, I got into this mode in the end. Is this the Force update mode?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It was not easy to get in. Keep you informed in a couple of seconds what the results are.
Thanks
Tried twice already and always stuck at 90%...
sebastien_be said:
Tried twice already and always stuck at 90%...
Click to expand...
Click to collapse
If it's stuck at 90% it's not working, believe me, I've had the same problem, I tried to update SuperSU and it bricked. Had to factory reset it and update the phone to the newest version which currently is 6.4.1, THEN go through the process of installing TWRP, SuperSU etc.
If you can't get the updates via the "Updater" option in the options, try to manually downgrade/upgrade it and see if it appears. You have to do some fancy google-translate to chinese to find the update packages on chinese forums.
Why U don't try the Honor 7 Multitool and the huawei update extractor combo???
That must be work!
Hi,
this is the latest status: https://youtu.be/QsPOg4lKkSc
I'm already using Multi-Tools and extracted a PLK-TL01H stock rom. I then used the unbrick option in multi-tools and restores this stock rom. But even though it starts fine, i can enter my pin code but when the language screens comes in, it makes a weird noise and reboots.
I then went into TWRP which works fine and could wipe cache and wipe dalvik cache. But I'm still stuck with welcome crash.
Any idea what to do? As reminder:
1) Bootloader is unlocked
2) Bootloader screen works fine (fastboot works but adb doesn't)
3) TWRP screen also works fine.
Thank you!
Did you try with an older or an other stock rom?
Yes I tried these two versions;
PLK-TL01H-C01B201
PLK-UL-TL-CL_EMUI3.1_Android5.1_5.12.1
Actually this version: PLK-TL01H-C01B201 works fine but only without sim card and SD card. If one of these is inside then i get automated reboot after entering pin code. But if i reboot without these two, then the phone works fine (i can get access to wifi, menu, and so on...).
WEIRD!
Hi,
My Honor 7 is still bricked and i can't get out of it. I tried to unbrick by flashing the following files from a stock rom:
fastboot flash boot .\Unbrick\BOOT.img
fastboot flash cust .\Unbrick\CUST.img
fastboot flash recovery .\Unbrick\RECOVERY.img
fastboot flash system .\Unbrick\SYSTEM.img
The flash of these 4 files works fine. I then get the welcome screen where i can choose the language, HiCloud settings and so on. As long as i do not get out of the flight mode it seems to be stable. But when i enter the pin code of my simcard (amongst others), then i get a crash and reboot.
So i have the feeling that there are still some conflicts. In the stock rom there are many other IMG files. Shouldn't I also flash them? I have the following IMG files: 3RDMODEM, CACHE, CRC, CURVER, DTIMAGE, EFI, FASTBOOT, MODEM, etc etc.
I have the feeling that if i flash them all, then it might work fine. But all files do not have a specific partition, so i don't know how to flash them.
Thanks for the support!
sebastien_be said:
Hi,
My Honor 7 is still bricked and i can't get out of it. I tried to unbrick by flashing the following files from a stock rom:
fastboot flash boot .\Unbrick\BOOT.img
fastboot flash cust .\Unbrick\CUST.img
fastboot flash recovery .\Unbrick\RECOVERY.img
fastboot flash system .\Unbrick\SYSTEM.img
The flash of these 4 files works fine. I then get the welcome screen where i can choose the language, HiCloud settings and so on. As long as i do not get out of the flight mode it seems to be stable. But when i enter the pin code of my simcard (amongst others), then i get a crash and reboot.
So i have the feeling that there are still some conflicts. In the stock rom there are many other IMG files. Shouldn't I also flash them? I have the following IMG files: 3RDMODEM, CACHE, CRC, CURVER, DTIMAGE, EFI, FASTBOOT, MODEM, etc etc.
I have the feeling that if i flash them all, then it might work fine. But all files do not have a specific partition, so i don't know how to flash them.
Thanks for the support!
Click to expand...
Click to collapse
The main problem that you were on MM version (6.3.16-DEV edition of ROM, no official update) of ROM and you're trying to flash Lollipop (B201, 5.12.1). It means that your problems are probably caused by this. Try to flash 5.12.16 then OTA update to 6.1.1 (using WiFi if possible) and then rollback from Emui 4 to Emui 3.1 if you want use Emui 3.1 and Lollipop. it's up to you. It's possible that your will be able to use SIM card when you would update to 6.1.1 (MM)
Sent from PLK-TL01H
SOLVED!
Thank you Lucki_X and Inside!Out ! Indeed i was trying to flash with Android 5.0 while i was already on Android 6.
Consequently I used the unbrick option from Multi-tools by using this version PLK-TL01H_EMUI4.0_Android6.0_6.2.1(B634).zip
Now everything works fine. Can anyone tell me how to install SuperSU? Because it is due to installation of SuperSU through TWRP that it caused the crash. I installed SuperSU 2.65 BETA.
How to do and which version to install to avoid bootloop?
Thanks very much,
Sebastien.
Hi All,
any idea why i now only have 3,87GB available as internal storage?
sebastien_be said:
Hi All,
any idea why i now only have 3,87GB available as internal storage?
Click to expand...
Click to collapse
Probably because you have multiple ghost systems as a result of previous still in memory. Factory reset will help.
Thank you! This is also solved now (Factory reset in TWRP + Calvik & Cache Wipes)!
Last question: Any advice on how to install SuperSU? Because by trying to install 2.65 BETA it caused the bootloop earlier.
Is there any version to propose instead of another one?
Thanks,
To answer my question: There is only the v2.62 that is working with Honor7 ! I Tried 2.49 and 2.65 both creates startup bootloop. Hopefully this time i got a full backup made in TWRP, was pretty easy to comeback to a working version.
i have a similiar brick as you. Flashed from B201 to B352 via the OTA. Had a boodloop, tried to erase cache and factory reset.
Tried to unbrick my phone with multi tool (first with the B201 udpate.app - now with B634 update.app). Now i'm in a bootloop again. What can I do?
EDIT: I'm in the ROM now, but can't enable my SIM card and WIFI is also not working
What can i do?
I have a locked bootloader, twrp, didn't make a backup, the instructions I followed were from this thread https://forum.xda-developers.com/redmi-note-3/how-to/kate-guide-install-lineage-os-locked-t3546154 can anyone help? Can I just flash the latest MIUI global rom via TWRP, or do I need to do something on the computer?
You cannot flash MIUI from twrp directly else you will get bootloop. Either you flash MIUI For EU (haven't used it,juat heard of it). Or flash Miui with pc.
Sent from my Pixel XL using Tapatalk
deepjyoti30 said:
You cannot flash MIUI from twrp directly else you will get bootloop. Either you flash MIUI For EU (haven't used it,juat heard of it). Or flash Miui with pc.
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
Hmm I don't quite get it, what do I actually do? Can you make me a step by step guide? I know I post a lot of question, but don't want to mess things up, and this phone is very different from others when it comes to flashing, unlocking bootloader and other stuff...
@Acoca
http://en.miui.com/thread-235865-1-1.html
bloodytolits said:
@Acoca
http://en.miui.com/thread-235865-1-1.html
Click to expand...
Click to collapse
Wow didn't think it would be this hard, maybe it's not hard but I don't understand half of the instructios... Thank you anyways, I'll try to follow the instructions you provided me. :good:
Acoca said:
Wow didn't think it would be this hard, maybe it's not hard but I don't understand half of the instructios... Thank you anyways, I'll try to follow the instructions you provided me. :good:
Click to expand...
Click to collapse
I think you can probably skip to the flashing part. If you've done what you said on the 1st post then that means drivers are already installed and the PC(miflash) detects your phone. Flash in edl mode, probably won't work on fastboot.
If you want to try MIUI but don't want to do that procedure(and still have twrp) I'd suggest just installing the xiaomi.eu ROM. You just need to flash that in twrp
bloodytolits said:
I think you can probably skip to the flashing part. If you've done what you said on the 1st post then that means drivers are already installed and the PC(miflash) detects your phone. Flash in edl mode, probably won't work on fastboot.
Click to expand...
Click to collapse
Okay so if I understood this are the steps:
1. Boot to fastboot mode and then to EDL mode
2. In MiFlash choose the fastboot rom without replaced recovery.img and flash
I deleted everything of my friends laptop, since I used his laptop to do this all.. So I just follow the steps from the thread how to flash LOS, and only flash the rom itself? Thank you!
Acoca said:
Okay so if I understood this are the steps:
1. Boot to fastboot mode and then to EDL mode
2. In MiFlash choose the fastboot rom without replaced recovery.img and flash
I deleted everything of my friends laptop, since I used his laptop to do this all.. So I just follow the steps from the thread how to flash LOS, and only flash the rom itself? Thank you!
Click to expand...
Click to collapse
Yup pretty much. If you want to keep twrp then just flash xiaomi.eu in twrp, it's basically MIUI without the bloats.
Be sure to flash the correct rom for your device, the download link have too much different ROMs in it. Here's the name of the ROM for our device:
Kenzo: xiaomi.eu_multi_HMNote3Pro_*version*.zip
Kate: xiaomi.eu_multi_HMNote3SE_*version*.zip
bloodytolits said:
Yup pretty much. If you want to keep twrp then just flash xiaomi.eu in twrp, it's basically MIUI without the bloats.
Be sure to flash the correct rom for your device, the download link have too much different ROMs in it. Here's the name of the ROM for our device:
Kenzo: xiaomi.eu_multi_HMNote3Pro_*version*.zip
Kate: xiaomi.eu_multi_HMNote3SE_*version*.zip
Click to expand...
Click to collapse
Hope I don't mess this up... Thank you very much!
bloodytolits said:
Yup pretty much. If you want to keep twrp then just flash xiaomi.eu in twrp, it's basically MIUI without the bloats.
Be sure to flash the correct rom for your device, the download link have too much different ROMs in it. Here's the name of the ROM for our device:
Kenzo: xiaomi.eu_multi_HMNote3Pro_*version*.zip
Kate: xiaomi.eu_multi_HMNote3SE_*version*.zip
Click to expand...
Click to collapse
I have a request if it's not a problem for you, can you link me the link for the rom (kenzo)
Acoca said:
I have a request if it's not a problem for you, can you link me the link for the rom (kenzo)
Click to expand...
Click to collapse
That xiaomi.eu on my earlier post is a link. Just click that then the latest thread(7.5.25) then downloads > androidfilehost > search the name for kenzo(which I posted above).
Flash the ZCX recovery and flash MIUI.. Easiest way if you want orignal miui and not eu version.
jthreja said:
Flash the ZCX recovery and flash MIUI.. Easiest way if you want orignal miui and not eu version.
Click to expand...
Click to collapse
And what's the advantage of using the original vs. the eu version?
jthreja said:
Flash the ZCX recovery and flash MIUI.. Easiest way if you want orignal miui and not eu version.
Click to expand...
Click to collapse
I don't know why but i had zcx and that too with the configuration which can install a miui rom over custom ones. However when i did that i faced a bootloop issue. And later i had to flash it again with pc. So i guess that way doesn't work for everybody. And yes, i also tried lazy swipe but same issue.
Sent from my Pixel XL using Tapatalk
Xiaomi.eu is same as miui with removed all mi apps and Chinese blotwares from it. Its a clean miui project...
Have you tried with the latest zcx?
Or flash rom from xiaomi.eu.
So wait, I can flash xiaomi.eu rom via twrp?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Is this correct? I went to xiaomi.eu and entered the latest thread MIUI 8 7.5.25 , went to stable builds and chose this rom. Now I just flash it via twrp? If yes, do I wipe everything and do a clean flash, or what?
Yes do a clean flash and you can flash that via twrp..
There should not be any problems..
If u want to roll back with original Miui rom and if u want phone like company frsh..
follow following the steps
1.download the official Fastboot RoM from official website of MiUI and Mi Flash and Extract it.
2.switch off your phone
3.Now switch to Fastboot mode
4.now switch to emergency Download mOde.
5.now open mi Flash
6.select the Extracted Rom
7.press on Refresh button
8.your mobile should show in Mi Flash as C10
9. Select Clean All
10.Click on Flash...
After success you can reboot ur phone
I don't take any responsibility if u miss any step in above do it at ur own risk...
I receive this Android 10 update,update succeeded,but after installing Magisk,my Mi 8 stick to fastbootmode no matter how it restarted.And after some reboots,twrp recovery is not able to decrypt data anymore,so it bricked.
Luckily before bricked,I had revert it back to miui_MI8Global_V10.3.5.0 by Twrp recovery en somehow after wipe data used stock recovery it come to live again.
So anyone has any idea,how to install Magisk without problem.
Magisk version used latest 20.3.
Twrp recovery boot by fastboot boot command.
sm1232 said:
I receive this Android 10 update,update succeeded,but after installing Magisk,my Mi 8 stick to fastbootmode no matter how it restarted.And after some reboots,twrp recovery is not able to decrypt data anymore,so it bricked.
Luckily before bricked,I had revert it back to miui_MI8Global_V10.3.5.0 by Twrp recovery en somehow after wipe data used stock recovery it come to live again.
So anyone has any idea,how to install Magisk without problem.
Magisk version used latest 20.3.
Twrp recovery boot by fastboot boot command.
Click to expand...
Click to collapse
I don't have time to customise instructions for your exact issue.
But you can gleen the majority of what you need to do by following my instructions here: https://xiaomi.eu/community/threads/9-12-19.53895/post-521845 Note : Ensure that you are using latest canary, and follow the instructions precisely in regard to passwords. Next, these instructions are how to not have issues when updating.
You are probably past the point of repairing permissions, so if you do not have a backup of your previous systems boot image, you will most likely need to format user data and start clean. Finally these instructions assume that your bootloader is unlocked.
sm1232 said:
I receive this Android 10 update,update succeeded,but after installing Magisk,my Mi 8 stick to fastbootmode no matter how it restarted.And after some reboots,twrp recovery is not able to decrypt data anymore,so it bricked.
Luckily before bricked,I had revert it back to miui_MI8Global_V10.3.5.0 by Twrp recovery en somehow after wipe data used stock recovery it come to live again.
So anyone has any idea,how to install Magisk without problem.
Magisk version used latest 20.3.
Twrp recovery boot by fastboot boot command.
Click to expand...
Click to collapse
Flash Disable_Dm-Verity_ForceEncrypt_12.27.2019.zip after Magisk
Bortex19 said:
Flash Disable_Dm-Verity_ForceEncrypt_12.27.2019.zip after Magisk
Click to expand...
Click to collapse
As I mentioned he is well past fixing permissions, unless he has the linked boot image that he can reflash. Even then, there would be permission issues. DM verity will not help.
The solution is to use Magisk Canary and follow the instructions that I linked.
Remove passwords.
Extract the boot image,
place in downloads folder,
patch boot image,
boot to recovery and flash Canary magisk . Done
I had the same problem and solved it by flashing dm-verity; It is probably easier and more convenient to try this first and, if it does not work, continue with the rest of the instructions
fixed
thanks for replies.
I use the patch bootimage methode all the time,had never problem with Android 9 (Pie).
Problem only occurs on Android 10.
Fixed:
Factory reset (all data lost),data partition empty.
Flash Magisk.zip by Twrp recovery.
clean dalvik-cache.
reboot,done.
I will try the patch bootimage methode on next Android 10 update.
sm1232 said:
thanks for replies.
I use the patch bootimage methode all the time,had never problem with Android 9 (Pie).
Problem only occurs on Android 10.
Fixed:
Factory reset (all data lost),data partition empty.
Flash Magisk.zip by Twrp recovery.
clean dalvik-cache.
reboot,done.
I will try the patch bootimage methode on next Android 10 update.
Click to expand...
Click to collapse
Hi,
I have only one question: after every update must I do every time factory reset?
slave2007 said:
Hi,
I have only one question: after every update must I do every time factory reset?
Click to expand...
Click to collapse
Till now I don't know ,when the next Android 10 update comes,I will try it and tell you the result.
sm1232 said:
Till now I don't know ,when the next Android 10 update comes,I will try it and tell you the result.
Click to expand...
Click to collapse
Thanks, I hope it is enough one times?
great news
slave2007 said:
Thanks, I hope it is enough one times?
Click to expand...
Click to collapse
Today I receive miui_MI8Global_V11.0.3.0.QEAMIXM update.
Use my method installing Magisk,works without problem.
Hope come true,did it WITHOUT FACTORY RESET.
:laugh:
sm1232 said:
Today I receive miui_MI8Global_V11.0.3.0.QEAMIXM update.
Use my method installing Magisk,works without problem.
Hope come true,did it WITHOUT FACTORY RESET.
:laugh:
Click to expand...
Click to collapse
??
"your method" is dirty install, wipe cache and perhaps install "disable DM verity too? ?
slave2007 said:
??
"your method" is dirty install, wipe cache and perhaps install "disable DM verity too? ?
Click to expand...
Click to collapse
I do not need to install disable dm-verity to avoid bootloop or so.
After format my data partition,used my method installing Magisk,reboot everything works fine.In Magisk manager only keep avb 2.0 dm-verity ticked by default.
After system encrypts the data partition,because Xposed framework Magisk module cause bootloops,I uninstall Magisk used Magiskuninstaller.zip and install Magisk again.After booted in system,in Magisk manager also keep encryption ticked by default.
I guess author of Magisk has done all the works for us to make Magisk works properly automatically. :good:
sm1232 said:
Today I receive miui_MI8Global_V11.0.3.0.QEAMIXM update.
Use my method installing Magisk,works without problem.
Hope come true,did it WITHOUT FACTORY RESET.
:laugh:
Click to expand...
Click to collapse
v11.0.3.0 come out already?? im stuck at v11.0.1.0..
Actually 11.0.6.0 already
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my MI 8 using Tapatalk
That is Android 9 based...
fidows said:
Actually 11.0.6.0 alreadyView attachment 4946525
Sent from my MI 8 using Tapatalk
Click to expand...
Click to collapse
last timr mi 8 got android 10 update, there revert version to 11.0.1.0.. based on Q.. so latest version is 11.0.3.0 for Q, and 11.0.6.0 for Pie..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
We are not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at us for messing up your device, we will laugh at you.
WORKING:
Decryption userdata with eu roms
Screen brightness settings
Correct screenshot color
MTP
ADB
Vibration
Sideload
To flash the TwrpDownload the recovery and copy to adb folder
Open terminal
Code:
fastboot flash recovery nameofrecovery.img
fastboot boot nameofrecovery.img
or
fastboot reboot with vol + to boot
Source Codehttps://github.com/geoanto555/android_device_xiaomi_gauguin
https://github.com/TeamWin/android_bootable_recovery
Prebuilt Stock Kernel
Thanks to TeamWin Recovery Project
all testers and developers
Thanks to Μιχάλης (chariPower) for the information(sideload)
Download Link-stwrp_gauguin_3.5.A10_05-01-2021
twrp_gauguin_3.5.A10_07-02-2021 fixed sideload and mtp
twrp_gauguin_3.5.A10_18-02-2021 fixed backup data error 255 (/data/extm)
twrp_gauguin_3.5.A10_05-03-2021 Fixed Mtp after format data & reboot recovery. (if the MTP does not open, try reboot in twrp again)
twrp_gauguin_3.5.1.A10_30-03-2021 fixed fastbootd
it’s first time i am using xiaomi phone. my device is RMN9P5G and waiting for unlocked. can i flash your recovery and install the latest stable EU rom in mifirm.net: V12.0.8.0.QJSCNXM immediately after unlock success？i’m worry a bit because some members report that internal, user data be encrypted and cannot access..
kien_vip said:
it’s first time i am using xiaomi phone. my device is RMN9P5G and waiting for unlocked. can i flash your recovery and install the latest stable EU rom in mifirm.net: V12.0.8.0.QJSCNXM immediately after unlock success？i’m worry a bit because some members report that internal, user data be encrypted and cannot access..
Click to expand...
Click to collapse
From my experience, the recovery cannot decrypt the stock ROMs, you have to flash a custom ROM (Arrow and Lineage are the only 2 right now), or flash a xiaomi EU ROM.
Copy the rom to sdcard or usb otg.
Format data
Reboot recovery
Flash rom.
With xiaomi eu decryption works...
Decryption on stock rom works if I hotboot TWRP (fastboot boot twrp.img). If I flash it, TWRP doesn't prompt me for a password when started and keeps data encrypted.
Hi there, thank you for the TWRP. Is there any chance to decrypt also user 999 for the Dual apps on the .eu ROMs?
not for now. I will upload new version soon
ilyachelsea said:
Is there any chance to decrypt also user 999 for the Dual apps on the .eu ROMs?
Click to expand...
Click to collapse
twrp_gauguin_MI10TL-RN9P5G_MI10I_3.5.A10_18-02-2021_BL-L
Fixed backup userdata (error 255 for data/extm)
User 999 can be decrypted only with default password ( without pattern-pin-pass) for now.
Thank you, but my password is PIN, anyway the recent twrp can't decrypt user 999. It is the message in red: "Failed decrypt user 999"
Only without pin,pass,pattern can be decrypted user999
It's a pity. I intend to back up also user 999 to keep my dual banking apps with the access data. If I first remove the PIN, and backup user 999 with the TWRP, after restore I will have to set up access again. This kills the benefit of the decryption and makes backup of 999 useless.
Thank you anyway and I hope, NO PIN is the temporary requirement of this version.
Hello everybody! Last week I unlocked the bootloader of my gauguin and initially I tried the official TWRP Recovery released by TWRP official page but it didn't work correctly and I couldn't flash zips, so I tried this beta version released by geoanto555 and it worked smoothly, I flashed zips and I had root permissions... But last night the smartphone had the battery low and it turned off, when I connected it to the charger it automatically reboot in fastboot and I can only enter in recovery mode. Sorry but I'm new in the modding world and I don't know what to do.. First brick.. What I did wrong? Anybody can help me? Is there anything I can do or I have to buy a new phone? Thanks to who will answer . Good evening.
devedel said:
Hello everybody! Last week I unlocked the bootloader of my gauguin and initially I tried the official TWRP Recovery released by TWRP official page but it didn't work correctly and I couldn't flash zips, so I tried this beta version released by geoanto555 and it worked smoothly, I flashed zips and I had root permissions... But last night the smartphone had the battery low and it turned off, when I connected it to the charger it automatically reboot in fastboot and I can only enter in recovery mode. Sorry but I'm new in the modding world and I don't know what to do.. First brick.. What I did wrong? Anybody can help me? Is there anything I can do or I have to buy a new phone? Thanks to who will answer . Good evening.
Click to expand...
Click to collapse
If you have access to the recovery, or fastboot, you can flash the original firmware with fastboot, but watch out, for some reason, when i flash the original rom from Windows using fastboot, it crashes, but with Linux it just works
AnibalSP said:
If you have access to the recovery, or fastboot, you can flash the original firmware with fastboot, but watch out, for some reason, when i flash the original rom from Windows using fastboot, it crashes, but with Linux it just works
Click to expand...
Click to collapse
In my device the rom is still the original. Do I have to do it anyway? What can happen if I try to flash a custom rom? If I only do the factory reset will I lose also TWRP?
AnibalSP said:
If you have access to the recovery, or fastboot, you can flash the original firmware with fastboot, but watch out, for some reason, when i flash the original rom from Windows using fastboot, it crashes, but with Linux it just works
Click to expand...
Click to collapse
I'm trying to do this with XiaoMiTool v2.. Thanks
devedel said:
In my device the rom is still the original. Do I have to do it anyway? What can happen if I try to flash a custom rom? If I only do the factory reset will I lose also TWRP?
Click to expand...
Click to collapse
If you can boot to android, or boot to TWRP / Orangefox, you don't need to flash again miui stock
If you flash a second rom, the worst thing that can happen, is that the rom may not work, but you wipe the internal memory (dalvik cache and data) and it should be running again
If you loose twrp for some reason, you can flash it again with xiaomitoolv2, or with fastboot
I'd recommend to you to try rooting, installing roms and similars things in an old phone if you don't are confident / know what are you doing, you will learn a lot in a few days of tinkering.
Anyone know what I need? I can't finish the installation of a official xiaomi rom to unbrick my device
devedel said:
View attachment 5257349
Anyone know what I need? I can't finish the installation of a official xiaomi rom to unbrick my device
Click to expand...
Click to collapse
Hi,
Download the official stock rom
Dont use XiaoMiToolV2, instead use MiFlash (official tool). Works for me every time. Then connect your phone in fastboot and flash all, I use the clean all and lock option which relocks my bootloader but you could just clean all and leave the bootloader unlocked. Then you can start again
fizzy900 said:
Hi,
Download the official stock rom
Dont use XiaoMiToolV2, instead use MiFlash (official tool). Works for me every time. Then connect your phone in fastboot and flash all, I use the clean all and lock option which relocks my bootloader but you could just clean all and leave the bootloader unlocked. Then you can start again
Click to expand...
Click to collapse
Hi, thanks for your advice.
Do you think it can works if usb debugging is off? I'm afraid I've disabled it the night the phone bricked.
I did wrong too many things but was my first try, tomorrow I'll buy a new Mi 10t lite and I'll try again, using more precautions.
Thank you all anyway, good evening.
devedel said:
Hi, thanks for your advice.
Do you think it can works if usb debugging is off? I'm afraid I've disabled it the night the phone bricked.
I did wrong too many things but was my first try, tomorrow I'll buy a new Mi 10t lite and I'll try again, using more precautions.
Thank you all anyway, good evening.
Click to expand...
Click to collapse
Enabled debugging is needed for adb when the system is running. For fastboot it does not matter.
Hey guys,
I've been installing customs without issue on my RN10.
Then one stopped booting freezing on the logo and bootloops.
Reinstalled stock with miflash and Redmi bootloops.
Tried customs again and same thing.
Any suggestions or things to try?
Worried the system_root and vendor errors are my problem.
Thanks in advance for any help or tips.
Cheers.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
GEoMaNTiK said:
View attachment 5541321
Click to expand...
Click to collapse
Try flashing the super image through recovery.
faced this problem the solution for me was to flash fastboot miui eu rom
SubwayChamp said:
Try flashing the super image through recovery.
Click to expand...
Click to collapse
Tried this and didn't help, thanks for the suggestion
muneeb rizwan said:
faced this problem the solution for me was to flash fastboot miui eu rom
Click to expand...
Click to collapse
Hey there, I've tried flashing via Mi Flash and although it says success, still bootloops on Redmi logo, then eventually to fastboot.
Do you remember which fastboot miui EU rom or have a link ?
I'll try anything at this stage.. think I've killed my first Xiaomi phone.
GEoMaNTiK said:
Tried this and didn't help, thanks for the suggestion
Click to expand...
Click to collapse
Also, you can fix it flashing this ROM xiaomi.eu_multi_HMNote10_V13.0.5.0.SKGMIXM_v13-12-fastboot
SubwayChamp said:
Also, you can fix it flashing this ROM xiaomi.eu_multi_HMNote10_V13.0.5.0.SKGMIXM_v13-12-fastboot
Click to expand...
Click to collapse
Thanks for this, just tried, used the windows_fastboot_first_install_with_data_format.bat and all installed with an OKAY.
No failures or errors during install. Phone bootloops on Redmi and comes back to Mi Recovery screen.
Is there a way with OrangeFox, TWRP and any other tool to fix the file system or help?
Thanks in advance.
GEoMaNTiK said:
Thanks for this, just tried, used the windows_fastboot_first_install_with_data_format.bat and all installed with an OKAY.
No failures or errors during install. Phone bootloops on Redmi and comes back to Mi Recovery screen.
Is there a way with OrangeFox, TWRP and any other tool to fix the file system or help?
Thanks in advance.
Click to expand...
Click to collapse
same with me..but i reset data in recovery ..phone booting normal back
Now I'm getting a failed to mount (block device required) but still not able to get a custom to boot. When I try to reboot, I'm getting a system partition is empty.
Next question I have, do I have to force encryption in Orangefox or turn it off?
Also DM-Verity, should both options be off or on for customs?
GEoMaNTiK said:
Now I'm getting a failed to mount (block device required) but still not able to get a custom to boot. When I try to reboot, I'm getting a system partition is empty.
Next question I have, do I have to force encryption in Orangefox or turn it off?
Also DM-Verity, should both options be off or on for customs?
Click to expand...
Click to collapse
bro im facing the same problem you have... im using rn10sunny twrp will not mount system, and didnt flash custom roms... and if i flash stock rom then it will goes to bootloop... im also in the same condition now.....
can you please contact me on telegram @KAVIKING007 for discuss about the problem.. it will help both we are getting solutions....
GEoMaNTiK said:
Thanks for this, just tried, used the windows_fastboot_first_install_with_data_format.bat and all installed with an OKAY.
No failures or errors during install. Phone bootloops on Redmi and comes back to Mi Recovery screen.
Is there a way with OrangeFox, TWRP and any other tool to fix the file system or help?
Thanks in advance.
Click to expand...
Click to collapse
I assume you are formatting data, no? The long procedure for me was, installing AEX, I couldn't install it with TWRP (in this state), used OFR, boot to the recovery that AEX provides, format data, then boot to system, check that all is ok, enable USB debugging, now go to fastboot and flash the Miui 13.
In other device was fixed just flashing the super image (from the stock ROM) onto the super partition.
Keep the OFR settings as they are.
My theory is that some custom ROMs break the sizes on the super partition and some images are not matching.
Can you please explain about OFR because i couldn't used before....
KAVIYARASU KING said:
Can you please explain about OFR because i couldn't used before....
Click to expand...
Click to collapse
OFR Orange Fox recovery, is available in the forum.
SubwayChamp said:
OFR Orange Fox recovery, is available in the forum.
Click to expand...
Click to collapse
I tried in orangefox also but same problem occurs..... that was system could not mount.... On twrp,OFR the system partition could not be mounted... I tried all the way... But no result
KAVIYARASU KING said:
I tried in orangefox also but same problem occurs..... that was system could not mount.... On twrp,OFR the system partition could not be mounted... I tried all the way... But no result
Click to expand...
Click to collapse
Try, as pointed out in previous posts, format data with AEX recovery, then flash Miui.eu 13 through fastboot.
Also you can try flashing the super image (from the stock ROM through OFR).
And, finally, you can try using Mi Flash tool BUT in EDL mode.
All of these, assuming that you are permanently flashing the custom recovery, not only booting to it.
GEoMaNTiK said:
Thanks for this, just tried, used the windows_fastboot_first_install_with_data_format.bat and all installed with an OKAY.
No failures or errors during install. Phone bootloops on Redmi and comes back to Mi Recovery screen.
Is there a way with OrangeFox, TWRP and any other tool to fix the file system or help?
Thanks in advance.
Click to expand...
Click to collapse
You did not use the correct *.bat file for a complete cleanup. The *.bat you used will leave the original data on your phone even if it is not compatible. If you have a problem and want to install a new clean Miui system, use the flash_all.bat file (in MiFlash this is the "clean all" option)
StaryMuz said:
You did not use the correct *.bat file for a complete cleanup. The *.bat you used will leave the original data on your phone even if it is not compatible. If you have a problem and want to install a new clean Miui system, use the flash_all.bat file (in MiFlash this is the "clean all" option)
Click to expand...
Click to collapse
I had already tried MiFlash before that other rom and it's .bat file.
Just tried this with MiFlash - mojito_global_images_V12.5.2.0.RKGMIXM_20210731.0000.00_11.0_global_ce90f80766.tgz
I selected flash_all.bat. Received a success on completion of flash, used this MiFlash2018-5-28-0 (as I was receiving errors on the new MiFlash versions).
And still my phone bootloops on Redmi. This almost confirms to me this phone is lost now, nothing else I can think of.
However, will wait to see if any other suggestions here.
Thanks everyone for trying to help, much appreciated.
Don't worry yesterday night i get a new solution for these problem..... Almost we will get our device soon..... Today im gonna test few steps and its work i will give the solution dude.... So don't worry....