Welcome everyone!
This thread has been created for extreme newbies/noobs and for their benefit. Not only noobs, but everyone is free to post questions and also give answers to those questions. Any type of question is allowed as long as it is related about the device. No off-topic discussions are allowed!
Hit Thanks if I Helped You!
Regards,
PoseidonKing
Hello,
I've installed a custom recovery, SuperSU and the xposed framework on my Wileyfox Swift 2 Plus and yesterday I've received an OTA update with wich I was (as expected) unable to update my phone. (it just rebooted to TWRP and did nothing) On their website I was only able to find an older build. I think what I have to do is install the stock recovery(to install the update then switch back to a custom one), but I don't know where to get it from.
boa05 said:
Hello,
I've installed a custom recovery, SuperSU and the xposed framework on my Wileyfox Swift 2 Plus and yesterday I've received an OTA update with wich I was (as expected) unable to update my phone. (it just rebooted to TWRP and did nothing) On their website I was only able to find an older build. I think what I have to do is install the stock recovery(to install the update then switch back to a custom one), but I don't know where to get it from.
Click to expand...
Click to collapse
Here you go. https://drive.google.com/file/d/0B1k2IwBoVgfFVVF1UEY3cUVVY28/view?usp=sharing
I grabbed this from cm-13.1.4-ZNH2KAS5RM-marmite-signed-fastboot-c64f8f5d87 - flash it via Fastboot preferably.
linuxct said:
Here you go. https://drive.google.com/file/d/0B1k2IwBoVgfFVVF1UEY3cUVVY28/view?usp=sharing
I grabbed this from cm-13.1.4-ZNH2KAS5RM-marmite-signed-fastboot-c64f8f5d87 - flash it via Fastboot preferably.
Click to expand...
Click to collapse
Thank you very much, I've installed the stock recovery and also uninstalled xposed framework and SuperSU so the System partition would be clean but when trying to update I get a derpy android with the text: ERROR. Does anyone know how can I fully revert to stock so I can install the update, would a factory reset solve my problem?
boa05 said:
Thank you very much, I've installed the stock recovery and also uninstalled xposed framework and SuperSU so the System partition would be clean but when trying to update I get a derpy android with the text: ERROR. Does anyone know how can I fully revert to stock so I can install the update, would a factory reset solve my problem?
Click to expand...
Click to collapse
You mean, a Cid face? LOL
You can revert by flashing the system.img via fastboot from the very same zip I mentioned before. You can get it here: http://builds.cyngn.com/factory/marmite/cm-13.1.4-ZNH2KAS5RM-marmite-signed-fastboot-c64f8f5d87.zip
boa05 said:
Thank you very much, I've installed the stock recovery and also uninstalled xposed framework and SuperSU so the System partition would be clean but when trying to update I get a derpy android with the text: ERROR. Does anyone know how can I fully revert to stock so I can install the update, would a factory reset solve my problem?
Click to expand...
Click to collapse
Exactly the same here. I flashed TWRP so I can install SuperSU for root access, now I've flashed back the stock recovery to apply the update and it ends in "Error".
It's also not possible to apply the downloaded zip-package manually (not via TWRP and not via Cyanogen recovery).
Log file says:
E: footer is wrong
E: Signatur verification failed
Installation aborted.
Click to expand...
Click to collapse
It's not an option for me to do a full reset each time they (who ever it might be in the future) release an update.
I bought this phone because I thought it might be easier to update/ get root access compared with e.g. Samsung devices, but in the end I must say Cyanogen OS is really bad and I hope there will be some mods soon, so I can get these bad/restrictive stock-OS off my phone...
zerospaced said:
Exactly the same here. I flashed TWRP so I can install SuperSU for root access, now I've flashed back the stock recovery to apply the update and it ends in "Error".
It's also not possible to apply the downloaded zip-package manually (not via TWRP and not via Cyanogen recovery).
Log file says:
It's not an option for me to do a full reset each time they (who ever it might be in the future) release an update.
I bought this phone because I thought it might be easier to update/ get root access compared with e.g. Samsung devices, but in the end I must say Cyanogen OS is really bad and I hope there will be some mods soon, so I can get these bad/restrictive stock-OS off my phone...
Click to expand...
Click to collapse
I haven't checked myself but linuxct seems to say its an img file. You need to flash img files with fastboot. Have you tried unziping the .zip file and seeing if there are img files (e.g system.img, recovery.img)
If you don't know how to use fastboot here is a good tutorial: https://forum.xda-developers.com/showthread.php?t=2277112
Hope this helps.
zerospaced said:
I flashed TWRP so I can install SuperSU for root access
Click to expand...
Click to collapse
You can enable that inside Developer options > Root access. There's no need to either alter your system nor unlock your bootloader if your only concern is root privileges.
zerospaced said:
... but in the end I must say Cyanogen OS is really bad and I hope there will be some mods soon, so I can get these bad/restrictive stock-OS off my phone...
Click to expand...
Click to collapse
Cyanogen is no more, Wileyfox's switching to an AOSP-based ROM through the following OTAs, which will be Android 7.0 Nougat and will start rolling on february. You've more info here: https://forum.xda-developers.com/swift-2/how-to/official-wileyfox-statement-regarding-t3528844
linuxct said:
You can enable that inside Developer options > Root access. There's no need to either alter your system nor unlock your bootloader if your only concern is root privileges.
Click to expand...
Click to collapse
No, I think that is only there in CyanogenMod (the community based custom rom) not in the Cyanogen OS (the proprietary OS for businesses). As far as I know no OEM can release an android phone with Gapps and root. We have an option there called "OEM unlock" which will allow you to unlock your bootloader (from a computer) but nothing else that would grant root out of box.
zerospaced said:
Exactly the same here. I flashed TWRP so I can install SuperSU for root access, now I've flashed back the stock recovery to apply the update and it ends in "Error".
It's also not possible to apply the downloaded zip-package manually (not via TWRP and not via Cyanogen recovery).
Log file says:
It's not an option for me to do a full reset each time they (who ever it might be in the future) release an update.
I bought this phone because I thought it might be easier to update/ get root access compared with e.g. Samsung devices, but in the end I must say Cyanogen OS is really bad and I hope there will be some mods soon, so I can get these bad/restrictive stock-OS off my phone...
Click to expand...
Click to collapse
Just flashing back to the stock recovery does not remove SuperSU. Due to your error I'm assuming you have a non-systemless root. In order to remove SuperSU you must flash http://downloadmirror.co/Uot/UPDATE-unSU.zip (with TWRP), and if that doesn't work I would recommend flashing back to full stock cyngn from: https://cyngn.com/support.
Cheers!
linuxct said:
You mean, a Cid face? LOL
You can revert by flashing the system.img via fastboot from the very same zip I mentioned before. You can get it here: http://builds.cyngn.com/factory/marmite/cm-13.1.4-ZNH2KAS5RM-marmite-signed-fastboot-c64f8f5d87.zip
Click to expand...
Click to collapse
Thank you very much, flashing the system.img with
Code:
fastboot flash system system.img
fixed the issue and I was able to update my system to the latest version and since it only changed the system partition, no data (files from internal/external storage) nor apps (not even their data) were deleted. After the update I had to flash TWRP, SuperSU and Xposed again.
boa05 said:
Thank you very much, I've installed the stock recovery and also uninstalled xposed framework and SuperSU so the System partition would be clean but when trying to update I get a derpy android with the text: ERROR. Does anyone know how can I fully revert to stock so I can install the update, would a factory reset solve my problem?
Click to expand...
Click to collapse
boa05 said:
Thank you very much, flashing the system.img with
Code:
fastboot flash system system.img
fixed the issue and I was able to update my system to the latest version and since it only changed the system partition, no data (files from internal/external storage) nor apps (not even their data) were deleted. After the update I had to flash TWRP, SuperSU and Xposed again.
Click to expand...
Click to collapse
Thank you, but unfortunately I've read this hint after trying the unsu method described here:
https://forum.xda-developers.com/showpost.php?p=63615067
I've installed the unsu-zip package and flashed the original boot.img via TWRP. It did not help, but since I did this I have another warning message when booting: "The dm-verity is not started in enforcing mode."
In the end I managed to get the update by installing the original zip package again and after this the OTA update worked.
What still remains is the new "dm-verity error message" right after booting....
Does anyone know if there is anywhere I can find the files to manually update to the new AOSP based ROM. Or has Wileyfox not released it?
(Or has anyone captured the PTA link?)
There is currently no new AOSP ROM. I've received only Cyanogen OS update (probably the last one?). According the Wileyfox statement on facebook, the new ROM (Nougat) will be released in the february...
rivierakid said:
There is currently no new AOSP ROM. I've received only Cyanogen OS update (probably the last one?). According the Wileyfox statement on facebook, the new ROM (Nougat) will be released in the february...
Click to expand...
Click to collapse
Nah they are releasing an update first to transition to their new rom.
"We have been ruthlessly testing this and planning a distribution for this update, with a rollout to be released beginning today with immediate effect." -Wileyfox Facebook
Click to expand...
Click to collapse
Then later (between February and end of Q1) they will release nougat. Its an easy mistake to make as they aren't too clear about it.
Thanks anyway.
It is unclear what kind of ROM will they release. According the statement it should be bloatware free OS
AOSP, Lineage OS, something else?
I really like cyanogenmod, so I hope there will be Lineage OS ROM in the future...
The new update
Hi, I'm not in the least technologically minded so please don't take the mick when I ask, will the new update delete the cyanogen os? Or is that something I will have to do? If so, what is safe to delete without damaging my phone?
Wow, that was a couple more questions then I had thought!
Thanks all.
Hello,
iam very frustrated by this OTA thing..
I had TWRP and SuperSU installed and i've tried everything but I can't install this OTA -.-" everytime i've tried it it gives me just an "ERROR".
1. I flashed the unSU zip in twrp.
2. I set the switch for stock recovery in developer options.
3 I fastboot flashed the stock recovery.img
4 I fastboot flashed the stock system.img
Then rebooted and did the update it just runs to like 20% and stops and then it shows me "ERROR" ..
Can somebody experienced help me pls This update is annoying I had to block it out of my mobile data use because it would eat up all my mobile data
EDIT: Maybe I have to relock my bootloader?
MCPoppa said:
Hello,
iam very frustrated by this OTA thing..
I had TWRP and SuperSU installed and i've tried everything but I can't install this OTA -.-" everytime i've tried it it gives me just an "ERROR".
1. I flashed the unSU zip in twrp.
2. I set the switch for stock recovery in developer options.
3 I fastboot flashed the stock recovery.img
4 I fastboot flashed the stock system.img
Then rebooted and did the update it just runs to like 20% and stops and then it shows me "ERROR" ..
Can somebody experienced help me pls This update is annoying I had to block it out of my mobile data use because it would eat up all my mobile data
EDIT: Maybe I have to relock my bootloader?
Click to expand...
Click to collapse
I don't think it'd be a good idea to mess with the bootloader for now. Also, I uninstalled SuperSU from the app. If you have xposed I suggest you uninstall that too (At least that's what I did). Sorry I can't help more I 'm still a little newby myself.
rivierakid said:
It is unclear what kind of ROM will they release. According the statement it should be bloatware free OS
AOSP, Lineage OS, something else?
I really like cyanogenmod, so I hope there will be Lineage OS ROM in the future...
Click to expand...
Click to collapse
Sadly, an OEM cannot rely on community-driven software, so it surely won't be CyanogenMod/Lineage. But, that doesn't mean that in the future we wouldn't be able to enjoy it thanks to custom ROM development
Jahane said:
Hi, I'm not in the least technologically minded so please don't take the mick when I ask, will the new update delete the cyanogen os? Or is that something I will have to do? If so, what is safe to delete without damaging my phone?
Wow, that was a couple more questions then I had thought!
Thanks all.
Click to expand...
Click to collapse
Welcome to the community!
This depends on what you understand about 'new update'. If the new update you're talking about is the currently rolling OTA, the one that's getting prompted on every phone right now, no, that won't delete CyanogenOS yet, but prepare the device to upgrade to a CyanogenOS-free Android 7.0 ROM, which will happen in a month or so. You won't have to do anything but let the phone update each and every single time it requests it. Cyanogen itself is not something you can remove as a user, unless you install what's called a custom ROM (this means, a different ROM software than the one provided by Wileyfox), so, you don't need to worry about it but keeping your device up-to-date as soon as it prompts you with an update ^_^
MCPoppa said:
Hello,
iam very frustrated by this OTA thing..
I had TWRP and SuperSU installed and i've tried everything but I can't install this OTA -.-" everytime i've tried it it gives me just an "ERROR".
1. I flashed the unSU zip in twrp.
2. I set the switch for stock recovery in developer options.
3 I fastboot flashed the stock recovery.img
4 I fastboot flashed the stock system.img
Then rebooted and did the update it just runs to like 20% and stops and then it shows me "ERROR" ..
Can somebody experienced help me pls This update is annoying I had to block it out of my mobile data use because it would eat up all my mobile data
EDIT: Maybe I have to relock my bootloader?
Click to expand...
Click to collapse
Try relocking like you said, but before, flash everything included in the latest CyanogenOS fasboot image zip (from here). To flash all of them at once, execute each and every of the following commands:
Code:
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot flash cache cache.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash modem NON-HLOS.bin
fastboot flash dsp adspso.bin
fastboot flash devcfg devcfg.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot flash keymaster keymaster.mbn
fastboot flash rpm rpm.mbn
fastboot flash sbl1 sbl1.mbn
fastboot flash splash splash.img
fastboot flash tz tz.mbn
Once done, relock your bootloader by doing:
Code:
fastboot oem lock
Please note, this probably doesn't fully lock your bootloader, as some propietary DRM keys might've been lost during the unlock process...
Good luck and please, keep us posted!
There was a security update released in the fall of 2016, at first I used the disable services app to disable system update servive in google play services but recently it keeps downloading anyway, could be that I did not re-disable the service fast enough in the google play services updates, not sure but it almost got me, luckily I was rebooting into recovery to backup and notived it so I used the file manager to delete update.zip from cache.
Anyway I have the update.zip file saved from last year and what I need to know is...
Has anyone successfully use flash fire to apply this update on this model if the LG K7 without losing root?
Will the update applied by either method (normal or using flash fire) overwrite the TWRP recovery?
If I lose root attempting this can I just flash it back with TWRP assuming it does not overwrite the recovery or flash my system backup again if needed?
Basicly, I don't know if flash fire can do this flawlessly and I don't know for certain if TWRP will still work on the phone without root on the phone and I don't know if the security update will overwrite the TWRP recovery.
All credible and valid answers appreciated.
Thanks
The answer:
No.
All of the updates to modern day (2017-12-20) do not remove root status; Nor do they affect the recovery partition (TWRP).
So you have successfuly used the OTA update with flash fire?
What really troubles me is all the patches to the GAPPS .odex files, my GAPPS is current so this seems like it would have a negative effect and the patch to boot.img particularly since it was changed during the rooting process apparently since I can't update supersu and supersu support's answer has been to restore the original boot.img.
Patch generally don't work on changed files so that's a concern.
Does anyone have the original boot.img they can share?
I only assume the update addressed the WI-FI KRACK exploit and that the new radio.img is worth having, that's the extent of my interest.
Any help out there? Anyone know of a properly prepared flashable zip?
Anyone successfully used flash fire for this?
flashfire doesnt work for some reason. it goes into a bootloop until you reboot the phone.
I have currently TWRP installed and firmware COL-L29 8.1.0.131 (C432).
Since two days now i have a notification for a security update of ~1.5mb but how can I install it?
When I just hit the button "install now" the phone restarts into twrp and can't perform the update.
Any ideas what to do?
Im also interested in this
You will have to remove twrp.
I made full update of my system with twrp via HuRUpdater, so there should be a way to "only" install this security update.
Otherwise, is there a way to get the original recovery back?
flattervieh said:
I made full update of my system with twrp via HuRUpdater, so there should be a way to "only" install this security update.
Otherwise, is there a way to get the original recovery back?
Click to expand...
Click to collapse
Original recovery wont work either.
You need a modified recovery that can install
Not approved firmwares. We had a nocheck recovery on huawei p9 forum. Something similar we need for this device.
You are playing with the fire by playing with that kind of updates without having the basic knowledge of ADB. HuRUpdater fails for many reasons and can brick easily your device even if you do the things right.
So basically you have to find original Recovery.Img and push it through adb. From the other hand the latest firmware is not signed from google yet so in a way its going to be useless since for every future update you will face issues if its not signed by google.
So basic steps find official firmware for your cust.
Extract recovery image, install adb on your pc
Google the commands for adb recovery,
Push recovery image.
Download firmware finder from google play,
Check firmware versions, check if its approved from Google
If not wait a week or so and it will get approval.
Then it will push automatically.
If your device is not to be rooted its not really worth to have twrp. If you are rooted then try to find no-check recovery for honor 10 and this way you can install upcoming updates and security patches with no google approval.
Be extra careful, a security update won't make your phone powerful. Instead you might brick it and never recover it again. As a developer i already send to garbage 5 huawei P9 devices and countless honor 8
I am reading a lot and still not 100% clear.
Maybe you can help?
I would like to uninstall Magisk, adb the stock recovery and so being able to OTA the updates.
Currently on COL-L29 8.1.0.120 (C432).
Do I need to flash ramdisk and recovery or just the recovery, I assume only the recovery file?
Do I need to use the .120 files or can I also use .104 files, I cannot find the files for .120
Hello,
Reflash just the recovery and make a full update. (Settings on right high corner and choose full update). You can choose .104 file or 120 file
If you make a simple update, it will fail. Even with the full update, you will keep all your data.
Thanks, so I have downloaded the .104.img
Deinstalled magisk and now try to flash the original 104.img on my 120 rom
This doesn´t work
FAILED remote: partition length get error
So I assume this doesn´t work with the 104 on a 120 rom.
I cannot find a 120 recovery and nobody answers on my other questions in other threads
No need to uninstall Magisk.
Try in bootloader mode with this command
Code:
fastboot flash ramdisk Name_of_your_recovery.img
You will find .120 recovery on this thread
If It fails, look for your Fastboot drivers
Today my phone just boot looped. Can get to TWRP. But, I want to update A14 to 15, since it might allow the phone to start again. I flash stock Boot A14, that seem to work. Then, I try to flash the update to A15. TWRP gives me this error: fec_open "/dev/block/dm-10" failed bad address.
E2004: my_region.01000100 partition fails to recover.
What does this error mean? and, is there anything else I can do or try?
turns out i have an EU phone, with indian sowftware on it? Is it possible to flash it back to EU? And, how can i check the current version of the firmware in terminal ?
update: ok, it looks I am on version 11. Is there any link available to the boot.img from A10 and the incremental update to A11 (not the telegram link, does not work with a broken phone)? Both Indian and EU? Hope that redoing the update fixed the bootloop