I am not sure how widespred was this, however on the 17th of october of 2022 my device was likely bricked over a firmware update made through the Zepp app.
Black screen, no matter how long I press the button. No response on the app. Its likely dead.
I have found mentions of this issue on very few places. On a few videos on youtube about fixing a black screen issue on this device i found some comments about people getting an update that made their devices unresponsible and nothing was making it go back. These comments were all made the same day I had this problem.
There is also a thread on the r/amazfit subreddit.
I'm luckly getting my device replaced trough the store, but it's definitely a bother.
Anyone else had this problem?
The same thing happened to me and on the same day(17), the watch did not connect to the application so I updated via playstore then downloaded suggested update, it was then that appeared the "update failure" i tried again and then appeared "update completed", but soon after the clock turned off and no longer turned on.
Same happened to my watch, It has been dead since last 7 days. Don't know how to recover from update.
The Service Center in Delhi says it will take one month for them to return watch after fix.
Related
Hey guys,
I've been reading the forums for the past few weeks and have been enjoying the discussions here, yet not having too much to add (constructively). Apologies if there is a thread on this already. I have done a couple of quick searches but nothing came up that seemed to fit the bill.
I got in this evening and took my S2 out of my pocket to find something wrong with it. I'll explain below. First of all software details:
Baseband Version:
I9100XXKI4 (up to date as far as Kies is concerned - stock ROM)
Apologies in advance if I'm missing any important information (I'm trying to sift through and try pick what I think are the relevant points).
Issue:
I felt my phone vibrate twice and took it out of my pocket (expecting a text). Instead I found the "Desk Clock" part of the stock "Clock" app flashing on and off the screen. When I tried to close it I came to the lock screen, unlocked it and then the desk clock opened again. It reloaded every time I attempted to close it. I tried to end it using the task manager but it didn't show up on the active applications list. I restarted the phone.
When I restarted it didn't seem to load properly with app icons all over the screen and the home screen numbers in the middle of the screen. I have a screenshot which I'll try to upload later. I restarted again.
This solved the arrangement issue but didn't stop the desk clock popping up. I also became aware of another problem. The battery was showing 12% (down from ~35% it was showing before - when checking battery usage). I plugged it into my laptop via the USB lead I have (which I had used earlier in the day to charge it). It didn't recognise immediately that it was charging. I swapped to AC, it started charging.
It then started showing "driving mode activated" and asked me whether I wanted to complete the task with UlysseSpeedometer or Voice Talk. I didn't press anything. When I pressed back it then asked me again a few seconds later. I restarted the phone again.
This time it showed 37% battery! I switched to the USB charger to try to back the phone up. It had trouble connecting but did eventually. I left it perfectly still as it tried to back up but failed twice partway through doing so.
Recent changes:
Only real changes are installing Super Compass today, which when (re)reading reviews didn't seem suspicious. I have uninstalled just in case.
Additional information:
I updated to 2.3.5 through Kies about a month ago (the first time it was available for me after checking for updates every few weeks - I have friends with the same phone on 2.3.4 and 2.3.3). Since then the countdown timer on the clock app sometimes shows the preprogrammed 1 minute countdown even when I have a timer running. The timer alarm still goes off at about the right time (haven't tested it properly) though.
In addition to this I have customised the apps that stay at the bottom (can't think of the terminology at this time of night) by swapping the Phone for GMail. Every time I restart the phone the GMail app is removed but the Phone app doesn't replace it. On a similar note I keep getting asked to choose my default PDF reader after ticking the box to select it multiple times.
My thoughts:
It appears to be a software issue to me. It's late now but tomorrow I plan to attempt to back up again (perhaps just by copying all the files on the phone using Windows Explorer if need be) and attempting to reinstall the firmware through Kies. If that doesn't work I'll do a factory reboot. After that I'll contact my carrier (O2 UK) to get some support.
Question:
I was wondering whether anyone has any insight, has experienced similar problems, or has any other advice regarding this?
Thanks in advance for any help you can offer
Regards
T
It sounds like it might actually be a hardware fault - basically what's happening is that something on the phone (whether hardware or software related) is triggering it to think it's being connected to a dock. The desk clock is what pops up as soon as you put the phone in a Samsung desktop dock and car mode similarly pops up when you use the vehicle dock, so there may be something funny going on with your phone's connecter that leads it to think these events are happening. (The weirdly arranged home screens tie in to this, as they can be a slightly buggy result of unplugging the phone from the one of the docks while in landscape mode - the launcher tries to load the home screens in landscape and just makes a mess.)
As a bit of a bodge-job fix you can install an app from the market called 'NoDock' if you're rooted, as this stops the phone ever being triggered in to dock mode, but to be honest id say your best bet is to speak to O2 or a Samsung service centre about getting it fixed or replaced!
Anyway, I hope this helps and you manage to get it sorted - I don't know what I'd do without my Galaxy S2!
Sent from my GT-I9100 using xda premium
Hello, quite a late night here as well but I'll try to give you my insight (and then slam myself to the bed )
It seems that the widget in your device went corrupt and perhaps then some more... I recommend backing up your data and then doing a factory reset and eventually re-flashing thru kies (come to think of it, i don't really know if KIES supports full-wipe reflash ). Also, for customizing the quicklaunch bar, use GO Launcher EX (free from the market) - its customizability far surpasses that one of the TouchWiz
If a factory reset doesn't help, you can help yourself by reflashing the original firmware by yourself via ODIN (but be sure to read tutorials and know your firmware first!), you'll find all the needed information here
Hope you get your problem resolved
TUnit said:
Hey guys,
I've been reading the forums for the past few weeks and have been enjoying the discussions here, yet not having too much to add (constructively). Apologies if there is a thread on this already. I have done a couple of quick searches but nothing came up that seemed to fit the bill.
ITS a question = Q&A so well done that man for posting in the right section .
I got in this evening and took my S2 out of my pocket to find something wrong with it. I'll explain below. First of all software details:
Baseband Version:
I9100XXKI4 (up to date as far as Kies is concerned - stock ROM)
Thats the modem not the firmware .
Issue:
When I restarted it didn't seem to load properly with app icons all over the screen and the home screen numbers in the middle of the screen. I have a screenshot which I'll try to upload later. I restarted again.
My thoughts:
It appears to be a software issue to me. It's late now but tomorrow I plan to attempt to back up again (perhaps just by copying all the files on the phone using Windows Explorer if need be) and attempting to reinstall the firmware through Kies. If that doesn't work I'll do a factory reboot. After that I'll contact my carrier (O2 UK) to get some support.
Rule one is backup data and factory reset the phone then test .
Follow that with a Kies upgrade if available .
jje
Click to expand...
Click to collapse
Hi there fellow S6 edge owners.
my version of Samsung S6 Edge is Hong Kong's G9250, only got this phone two days, ago, I used to have an HTC One m7 and always rooted with custom roms, but seems like Samsung has done a great job this time, I am going to stick with stock rom for now.
Strange things happened to me after I purchase from the store and with the helpful staff from the samsung store helping me setting up this beauty. Not long later after I walk out of the store the Following message from Security Log pops up: "Unauthorised actions have been detected. Restart your device to undo any unauthorised changes"
So I restart my phone, thinking it's no biggie, but the message would reoccur any time in between 30 to 2 hours, or when I am updating and installing apps as a new phone. I didn't transfer any old contents, nor having install any apk manually. The rom is stock as it can be.
So I factory reset it, and the same message would keep popping up, I scan my phone using the security app and no threats were found, but I had to restart my phone to make the notifications goes away, I start to suspect there might be something wrong with the rom itself or the kernel, so I decide to Factory reset it in under 6 hours of purchase, after booting on and signing in, the message would come up again!!
So I took it to the store, and asked them have they seen this? One of the manager said you need to cleared the app preferences and clear the credentials. I also updated the security policy myself. but still no luck. So they gave me a new one, with in 20 minutes of setting up, the message "Unauthorised actions have been detected. Restart your device to undo any unauthorised changes" Comes up again.
I am just wondering if any other is experiencing any similar issues? This is getting annoying.
same issue
Im having the same issue with Australian stock.
I too am having the same issue on Australian stock. :/
I'm having the exact same issue with Hong Kong stock. Tried everything from reinstalling to clearing the app preferences.
Has anyone found a solution to this annoyance? I don't like these notifications popping up every 5 minutes!!
If youre rooted, Use TitaniumBackup and freeze "SecurityLogAgent"
it'll get rid of those popups
Sent from my SM-G925V using XDA Premium 4 mobile app
Same problem
Norwegian Phone. Same problem. Notification every 5 min or so.
Ekjord said:
Norwegian Phone. Same problem. Notification every 5 min or so.
Click to expand...
Click to collapse
same problem here as well
So, I was faced with the same problem as you all above. I did a bit of research and speculate (I'm still not 100% on this) that this security bug is linked with the keyboard Samsung has preinstalled on the device. Try disabling it, using another keyboard, or just disconnecting it from any network it may use (mainly to update your dictionary regularly.)
What I did exactly:
-Reboot phone into recovery, wipe cache partition, factory reset.
-Start up phone, security threat came after a few minutes, before anything was installed.
-Restarted phone through security to reset kernel
-On startup, disabled keyboard and enabled swiftkey. Scanned, result: secure.
-Enabled keyboard, but disabled all features. No problems. Scanned, result: secure.
-Enabled features one by one, no problems yet. No problems. Scanned, result: secure.
-Reset keyboard settings. Scanned, result: secure. After a few minutes, security was triggered.
As I said, this may or may not be related, but this is the first time I've been seeing my phone as secured since I bought it.
I read somewhere that the problem is known.. and should be fixed in an update...if you are rooted you know what you have to do
Had the very same problem which disappeared with the update to 5.1.1. Have a couple of colleagues who suffered as well as the update cleared it up. Unfortunately from what I've read 5.1.1 kills the prospect of rooting without triggering Knox... Should have done more research before rushing to update...
Cloudyherb said:
Hi there fellow S6 edge owners.
my version of Samsung S6 Edge is Hong Kong's G9250, only got this phone two days, ago, I used to have an HTC One m7 and always rooted with custom roms, but seems like Samsung has done a great job this time, I am going to stick with stock rom for now.
Strange things happened to me after I purchase from the store and with the helpful staff from the samsung store helping me setting up this beauty. Not long later after I walk out of the store the Following message from Security Log pops up: "Unauthorised actions have been detected. Restart your device to undo any unauthorised changes"
So I restart my phone, thinking it's no biggie, but the message would reoccur any time in between 30 to 2 hours, or when I am updating and installing apps as a new phone. I didn't transfer any old contents, nor having install any apk manually. The rom is stock as it can be.
So I factory reset it, and the same message would keep popping up, I scan my phone using the security app and no threats were found, but I had to restart my phone to make the notifications goes away, I start to suspect there might be something wrong with the rom itself or the kernel, so I decide to Factory reset it in under 6 hours of purchase, after booting on and signing in, the message would come up again!!
So I took it to the store, and asked them have they seen this? One of the manager said you need to cleared the app preferences and clear the credentials. I also updated the security policy myself. but still no luck. So they gave me a new one, with in 20 minutes of setting up, the message "Unauthorised actions have been detected. Restart your device to undo any unauthorised changes" Comes up again.
I am just wondering if any other is experiencing any similar issues? This is getting annoying.
Click to expand...
Click to collapse
I am in ontario and i had the edge from a month ago and unfortunately broke it but got a new one last night in the mail and now this issue is happening to me. My first edge ive had for a month has never given me this warning before super annoying and im not reseting a bunch of ****. Was hoping thered be a disable option for the security grrr... i guess hope an update fixes this.
Hey everyone!
I picked up a Gear S about a week ago and until today, I've had no problems. I took the watch off charge this morning and everything was working as fine, used some apps etc, no issues. Then I checked my phone for updates and saw that the Gear Manager app had an update and I installed it. Since then, the screen on my Gear S has been constantly turning on and off. It will turn for about 9 seconds, then switch off and back on 2 seconds later. Turning the screen on manually works but everything is pretty much frozen. I can periodically get as far as the pedometer (because there's an icon for it on the home screen) or to the Apps menu but no further and then the screen will switch itself off.
I'm not sure whether an update to the Gear Manager app should affect the watch itself but I know that when I wiped my phone a few days ago and went to set up the Manager again, it factory reset the watch so I assume there is a direct connection between the software. I've tried disabling both Bluetooth and the remote connection to check if Gear Manager is causing the screen to behave strangely but it's still turning on and off. It's impossible to do a soft reset through the Gear S itself as the screen switches off before I can get to settings and I've tried doing a hard reset but nothing works.
I tried searching on Google for anyone having similar issues and the only thread I can find was posted on Android Central (yesterday I think) with a few people saying that they're having the same problem which makes me thing that the update to Gear Manager is the issue.
Edit: The only screen that doesn't seem to be affected is the PIN lock screen. Screen switches off there as normal and does not come back on.
Edit 2: I've never reset the Gear S before (and I only noticed the factory reset mentioned above after it was finished) but when I attempt to do a hard reset, the watch just reboots as normal without anything happening and all info / data is still there. I presume this really shouldn't be the case?
UPDATE: I'm an idiot / Samsung's instructions on how to do a hard reset are awful.
I decided to Google how to do a hard reset and discovered that when in the Recovery Menu, you need to hold down the Power button to choose an option (Samsung's instructions just tell you to press the Power button until you highlight what you want and I assumed it would automatically choose that after a few seconds because the phone would restart for me). Watch is now factory reset and so far the screen issue appears to be resolved. Another four hours of transferring music it is then.
@BOZG can you post a link to that thread?
I have the Same problem. Sometimes changing a clock face or installing/uninstalling a program seems to make it stop. I have yet to find a good consistent solution. Restarts etc. don't help. Hard reset will fix it but last time I just changed settings on and off and powered the phone on and off and eventually it stopped.
It seems related to when the phone is connected remotely over a cell network. I have the AT&T unlocked with a T-Mobile regular line, not the wearable line since I have a 5 for $100 business plan and the 5th line was not being used. Doubt that makes a difference though.
Followup:
Just now I had the watch off and charged to 100%. Powered up with phone off. Same issue. Watch face loads, the hands change to the current time, then it slides down the screen and looks like a reload because when it comes back up the time isn't correct. The hands reset to the right time. This happens a few times. I power the phone up. Bluetooth connects. I open the gear manager on the phone and it stops.
Will try to repost if that's repeatable. I hope they fix it because it burns quite a bit of battery when it happens. It gets warm so it's running the CPU a lot whatever it is.
allow to power down
BOZG said:
Hey everyone!
I picked up a Gear S about a week ago and until today, I've had no problems. I took the watch off charge this morning and everything was working as fine, used some apps etc, no issues. Then I checked my phone for updates and saw that the Gear Manager app had an update and I installed it. Since then, the screen on my Gear S has been constantly turning on and off. It will turn for about 9 seconds, then switch off and back on 2 seconds later. Turning the screen on manually works but everything is pretty much frozen. I can periodically get as far as the pedometer (because there's an icon for it on the home screen) or to the Apps menu but no further and then the screen will switch itself off.
I'm not sure whether an update to the Gear Manager app should affect the watch itself but I know that when I wiped my phone a few days ago and went to set up the Manager again, it factory reset the watch so I assume there is a direct connection between the software. I've tried disabling both Bluetooth and the remote connection to check if Gear Manager is causing the screen to behave strangely but it's still turning on and off. It's impossible to do a soft reset through the Gear S itself as the screen switches off before I can get to settings and I've tried doing a hard reset but nothing works.
I tried searching on Google for anyone having similar issues and the only thread I can find was posted on Android Central (yesterday I think) with a few people saying that they're having the same problem which makes me thing that the update to Gear Manager is the issue.
Edit: The only screen that doesn't seem to be affected is the PIN lock screen. Screen switches off there as normal and does not come back on.
Edit 2: I've never reset the Gear S before (and I only noticed the factory reset mentioned above after it was finished) but when I attempt to do a hard reset, the watch just reboots as normal without anything happening and all info / data is still there. I presume this really shouldn't be the case?
Click to expand...
Click to collapse
I left mine to use up all the battery,then when it switched off, i left for 2 days and when i switched back on... all fine again.
theroblog.com said:
@BOZG can you post a link to that thread?
I have the Same problem. Sometimes changing a clock face or installing/uninstalling a program seems to make it stop. I have yet to find a good consistent solution. Restarts etc. don't help. Hard reset will fix it but last time I just changed settings on and off and powered the phone on and off and eventually it stopped.
It seems related to when the phone is connected remotely over a cell network. I have the AT&T unlocked with a T-Mobile regular line, not the wearable line since I have a 5 for $100 business plan and the 5th line was not being used. Doubt that makes a difference though.
Followup:
Just now I had the watch off and charged to 100%. Powered up with phone off. Same issue. Watch face loads, the hands change to the current time, then it slides down the screen and looks like a reload because when it comes back up the time isn't correct. The hands reset to the right time. This happens a few times. I power the phone up. Bluetooth connects. I open the gear manager on the phone and it stops.
Will try to repost if that's repeatable. I hope they fix it because it burns quite a bit of battery when it happens. It gets warm so it's running the CPU a lot whatever it is.
Click to expand...
Click to collapse
samsung gear s screen on and off..looping
There you go. Not much to read there though as it's just me and OP. The problem re-emerged for me after a few days again so I was forced to do another hard reset to actually use the watch. I noticed it when I woke up in the morning and noticed that another update had been pushed to the Gear app. That's twice now that this has happened shortly or immediately after the Gear app was updated.
I haven't been able to uninstall an app / change clock face to see if it works as the watch is completely unusable when it happens to me. The Gear app registers that it's connected but it's impossible to change anything from there either and if I turn the watch off and back on again, the Gear app will no longer connect.
petethepete2000 said:
I left mine to use up all the battery,then when it switched off, i left for 2 days and when i switched back on... all fine again.
Click to expand...
Click to collapse
Not sure if I've actually tried letting the battery drain. I'll try that the next time it happens (if it happens).
I had the same problem after the update, a reboot didn't solve the problem. Eventually the battery drained. After a recharge most is fine but I never know which watch face will suddenly appear.
Same issue again. Didn't see the Gear app updating but there was an update released the day before. Going to switch off auto-updates and see if it definitely the problem. Just seems too coincidental that this problem starts right after an update is released for the Gear App.
petethepete2000 said:
I left mine to use up all the battery,then when it switched off, i left for 2 days and when i switched back on... all fine again.
Click to expand...
Click to collapse
Started doing it again yesterday so let the battery die and charged it fully and it didn't help. Left it on the box overnight and brought it to a Samsung Service Centre this morning and of course it was working again when I took it out of the box! Left it with them anyway so I'll see what happens.
I've had my Gear S a few weeks and it has also started doing this, I will give some of the suggestions here a go.....
EDIT: So opening the Gear Manager App once Bluetooth was connected brought my Gear S back to life. Phew!
It's only entered this state after I turned it off at night and then turned it back on in the morning - so it had been off roughly 8 hours. Upon turning it on the screen would cycle from the right time and notification numbers and the wrong time and wrong notification numbers too off again.
@ BOZG - Just wondering if you got your S back yet and if so, were they able to tell you what was causing this on/off problem. Mine just started doing it yesterday.
Also, how did you find the "Samsung Service Centre"?
holding the screen seems to cause it...
Had to send mine to Samsung for a new charging cradle and they updated the software to latest, when i got it back it seemed fine. Then i was messing about with it and was holding the screen to my chest for a while and that seemed to cause it to happen. It seems to be the screens gets too much activation and it flips out. I think this is what started the problem last time it happened.1
Switching to power saving mode seems to fix it for me... have to wait until it gets low on battery and when the low bat warning comes on, switch then... leave for a bit then switch back to normal.
I called Samsung Thursday and they sent me a UPS label and told me to send the watch, charging cradle and AC charging cord back in for service. She told me it takes about 7-14 days. We shall see.
Happy to have found this. </rant>I'm starting to get enough of this Samsung stuff. I had the note 2 and now I have the note 4 and gear S. That is mote then 1000 euro of equipment. And today when I tried the restore to fix this, both the phone and the watch rebooted. Crazy that they can not build good software and hardware for this price. </rant>
To me it seems that is freezes somehow when this happens. It kept jumping back to 22:10 time and changed to the watch-face and settings keep rolling back. It seems to happen to me, when the watch is off for some hours. The samsung way... no update to fix this.
solved for me
hi first of all sorry if i do any mistakes because English is not my language
i had similar problem and i found the solution at least in my case . THE PROBLEM IS NOT WITH THE GEAR S
all was ok using 4.4.2 kitkat on my note 3 before few months i upgrade with lollipop 5 official from sammobile via odin
from that moment the problems begin with the reconnection of the gear with the note
long time to connect and no auto reconnection only manual by turning off-on the bluetooth
i was boring to do format to the note3 so i left it as it
few weeks ago probably of gear manager update the gear start freezing and the screen turning on and off
first i do a factory reset and the gear was ok for a while but after it do the same but the next time the screen was not ok the colors was different so i send to service in Athens
the service in Athens is very fast and very helpful , is one of the reasons that i will difficult go with other manufacture , so they return me the gear saying that they change the motherboard and now there is new imei
but the gear that they send me was brand new except the band and the box. BUT after some time the same problem ..... i call them and they tell me to send it back so i send it and i receive it again but this time the say that the watch is ok
GUESS NOW .... i turn it on and after a while of the connection with my note AGAIN the same problem the screen on and off and freezing plus was overheat underneath
i was ready to call them and to say few words but they was closed ..... then i search the net and i found this post and i thing probably is not the gear the problem ,no hardware problem, i decide to do a test
i download the last working rom to my phone 4.4.2 and magically the problem disappears .... but now there is a software update on my phone lollipop 5 so i do the update and i was ready if the phone cause again the same problem
to return and stay with 4.4.2 But now all is ok the problem solved .... now is more of 24h and all are ok
i hope this will work for you also
Same problem
I have the same issue exactly - Note 4 with latest lollipop upgrade - it is very frustrating......I don't particularly want to have to move back an OS just to use the watch !
JALUK said:
I have the same issue exactly - Note 4 with latest lollipop upgrade - it is very frustrating......I don't particularly want to have to move back an OS just to use the watch !
Click to expand...
Click to collapse
Ok but doing a downgrade and all working ok you can do update again.... i am not with 4.4.2 i went to the latest 5.0 for me now and all are ok.
Maybe something was wrong with the update procedure.
UPDATE
the touch function of the 2nd gear stop working so i send it back and they send me new device
for a few days all was ok . But today when i restart the phone while the gear was disconnected the problem with screen turning on repeatedly appears again .
for sure is not problem of the gear , this is the 3rd device in my hands, something is wrong with the gear manager software .
i have also reconnection problems .... if the phone is far away and they lost Bluetooth connection the most of the times i must reconnect manually , the gear say disconnected but the note think is still connected
I wonder has anyone tried to reset the watch as a stand alone device and see if the problem happens? I know you might lose a lot of the blue tooth functionality but I think I will test it and see if the problem still happens.
Hi all,
I've searched but cannot find anyone with this set of problems...
So, brand new swift 2x, turned it on and let it download several ota updates. After the first couple the phone started randomly rebooting, I think in the middle of yet another update process....
Result (when updates stopped and device states 'up to date') is a device that continues to randomly reboot plus other strange problems (eg camera is installed, shows in apps, but is not in drawer and crashes when launched from lock screen).
I suspect something went badly wrong during the updating...but am unsure how to fix it.
Any suggestions?
Edit: should add have wiped cache/factory reset in recovery several times with no improvement
Edit2: aaaand it appears I've some how put this in the wrong section. Admins please feel free to move...and apologies!
Cheers!
Hi all,
Thanks for taking the time to read.
I bought my Bip back in February and it has been a joy to use. About 3 weeks ago I opened the MiFit app and it said as it often did that there was a new firmware and proceeded to run an update. It had done this many times before without a problem. This time however when returning to the watch it said "Connect to APP to update". I tried connecting it to the app but each time I pressed tick on the watch the phone gave an error that the connection was refused. I checked the Amazfit support pages and followed the suggestions of rebooting the phone, forgetting the watch in the app and then in the bluetooth settings on the phone but the problem still persists. I tried it on the wife's iphone to rule out my handset but got the same error. The watch is not visible in the bluetooth settings of the phone.
Video of problem: /drive.google.com/file/d/11ftktWFmqf4dFrWyyg9fMEOrCNhr3kEn/view?usp=sharing
Since then I have tried on an Android phone and got a bit further. With Android I can pair through bluetooth but when running the MiFit app I get an error that the connection fails when trying to pair up the watch. I then installed the "Notify and Fitness" app which does see the watch however on attempting to update the firmware or resources it fails at 98-99%. When using the tests in the app I can get the watch to run a heart rate test and vibrate. Also if I flash with a chinese res file then the language of the error also changes.
I have tried using the two alternative methods of update, new and old firmware but to no avail. I have also tried doing this without the MiFit ap installed and firmware updates through gadget bridge.
One last thing to try is for the battery to run down and restart the thing but I am still a week at least away from 0% and Have been trying to fix it for a fortnight
Do any of teh gurus of XDA have any tips or suggestions of what else I could try?
Thanks in advance!
Any solution in 2019 using iphone?
Hello.
Did you solve this problem?
I found solutions but they were wrote more than a year ago...
And all of them used android phones to install new (now old) firmwares, but I only can use my iphone...
nategs said:
Hi all,
Thanks for taking the time to read.
I bought my Bip back in February and it has been a joy to use. About 3 weeks ago I opened the MiFit app and it said as it often did that there was a new firmware and proceeded to run an update. It had done this many times before without a problem. This time however when returning to the watch it said "Connect to APP to update". I tried connecting it to the app but each time I pressed tick on the watch the phone gave an error that the connection was refused. I checked the Amazfit support pages and followed the suggestions of rebooting the phone, forgetting the watch in the app and then in the bluetooth settings on the phone but the problem still persists. I tried it on the wife's iphone to rule out my handset but got the same error. The watch is not visible in the bluetooth settings of the phone.
Video of problem: /drive.google.com/file/d/11ftktWFmqf4dFrWyyg9fMEOrCNhr3kEn/view?usp=sharing
Since then I have tried on an Android phone and got a bit further. With Android I can pair through bluetooth but when running the MiFit app I get an error that the connection fails when trying to pair up the watch. I then installed the "Notify and Fitness" app which does see the watch however on attempting to update the firmware or resources it fails at 98-99%. When using the tests in the app I can get the watch to run a heart rate test and vibrate. Also if I flash with a chinese res file then the language of the error also changes.
I have tried using the two alternative methods of update, new and old firmware but to no avail. I have also tried doing this without the MiFit ap installed and firmware updates through gadget bridge.
One last thing to try is for the battery to run down and restart the thing but I am still a week at least away from 0% and Have been trying to fix it for a fortnight
Do any of teh gurus of XDA have any tips or suggestions of what else I could try?
Thanks in advance!
Click to expand...
Click to collapse
I let it run down helped along by repeated vibration tests but eventually after about 3 weeks the thing ran out of juice. Charged it and started it back up and it booted up fine, it has been fine since! great little watch but really needs a hard reset button.
Good luck