Hello
i used stock OxygenOS firmware based on Android 11 and everything was working good. But i wanted to try [ROM][13.0][DENNIZ] Project Elixir [OFFICIAL] [Thirteen][AOSP] and install it using TWRP. Elixir works fine but i have some problems with SMS so i install [ROM][UNOFFICIAL][12] PixelExperience [AOSP] OnePlus Nord 2 5G [denniz] and have same problems. Then i try
OPN2_DN2103_OxygenOS11.3_A.20_Stock using PartitionsBackupper_v1.8. Installation was ok but after turn phone on i catch bootloop on text "android".
I tryed to get back Elixir but is the same problem: bootloop.
How can i fix it?
I back to A19 and works again
right now have problems to update. show: veryfication field.
I tryed to install stock A20 but it didn't work -> bootloop
So i stay on A19.
c1rca said:
I back to A19 and works again
right now have problems to update. show: veryfication field.
I tryed to install stock A20 but it didn't work -> bootloop
So i stay on A19.
Click to expand...
Click to collapse
You can try this guide:
[STOCK][FULL-ROM] OxygenOS_11.3_A.20 EU DN2103 | Unbrick guide
/* * Your warranty is... still valid! * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. * Please do some research yourself before asking or use anything on this...
forum.xda-developers.com
Tried, works fine and can be updated to A12 stock through updater. Warning. Will remove fastbootd and BROM so no more control over your own cellphone.
You can update to A11_A.21 too through temporary TWRP install to have the latest OOS11, until hope that the custom ROMs became more stables.
Unfortunately phh stopped it's AOSP, as per Andy Yan words so hard time for all GSI based ROMs. The most skilled devs don't have enough spare time.
Let's see what's happening...
roldev said:
You can try this guide:
[STOCK][FULL-ROM] OxygenOS_11.3_A.20 EU DN2103 | Unbrick guide
/* * Your warranty is... still valid! * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. * Please do some research yourself before asking or use anything on this...
forum.xda-developers.com
Tried, works fine and can be updated to A12 stock through updater. Warning. Will remove fastbootd and BROM so no more control over your own cellphone.
You can update to A11_A.21 too through temporary TWRP install to have the latest OOS11, until hope that the custom ROMs became more stables.
Unfortunately phh stopped it's AOSP, as per Andy Yan words so hard time for all GSI based ROMs. The most skilled devs don't have enough spare time.
Let's see what's happening...
Click to expand...
Click to collapse
I make everything from this step:
Spoiler: Flash Stock firmware with UNLOCKED bootloader
Click to expand...
Click to collapse
and still same problem.
Do you use mtkclient?
c1rca said:
I make everything from this step:
and still same problem.
Do you use mtkclient?
Click to expand...
Click to collapse
For some reason partition backuper didn't work for me. Maybe because unauthorized pc I used , so I made full restore with mtk client from this post.
This backup did not override your proper unique partitions. Did a full wipe after flash and get brand new A20 which still use with a pleasure. A bit worried about the android security patch a bit old, but not so critical.
In a couple of weeks when buy new phone will try update this one with well maintained custom ROM. Right now is my daily driver.
Hope helped.
roldev said:
For some reason partition backuper didn't work for me. Maybe because unauthorized pc I used , so I made full restore with mtk client from this post.
Click to expand...
Click to collapse
I tryed both and mtk works better. Now i have A20 with A11
roldev said:
You can update to A11_A.21 too through temporary TWRP install to have the latest OOS11, until hope that the custom ROMs became more stables.
Click to expand...
Click to collapse
Not work for me. It's A21 with A12? Or need to wait for A22?
c1rca said:
I tryed both and mtk works better. Now i have A20 with A11
Not work for me. It's A21 with A12? Or need to wait for A22?
Click to expand...
Click to collapse
Nope, bro. The last A11 is A21 update.
Won't be A22 update.
You can update to A12 C.10 on DN2103.
Or every A12 update > 02, for an Indian version.
Make sure you really want to f** your phone with A12 from OnePlus, loosing fastbootd and BROM mode ...
thank you. I will stay on A11 but i can't update it to A21. I have "veryfication problem". I am on A20.
c1rca said:
thank you. I will stay on A11 but i can't update it to A21. I have "veryfication problem". I am on A20.
Click to expand...
Click to collapse
There is a way, documented here in this forum, to recover stock boot.img, update via temporary TWRP install, and get the latest update.
Because of lack of time I didn't update to A21. The unique difference between A20 and A21 is android security patch level. 2 months diferentes which is not so important for mi. A20 hasn't any bug. Disabled update notice and enjoy.
When have some time will install some of the customs roms available, currently in very advanced state and development.
Cheers.
roldev said:
Nope, bro. The last A11 is A21 update.
Won't be A22 update.
You can update to A12 C.10 on DN2103.
Or every A12 update > 02, for an Indian version.
Make sure you really want to f** your phone with A12 from OnePlus, loosing fastbootd and BROM mode ...
Click to expand...
Click to collapse
wait, did they really just remove fastboot and brom on C10? because i installed it and got bootloop, and i cant even figure a way to fix it so i guess my phone is just a brick because of that
TheKloras said:
wait, did they really just remove fastboot and brom on C10? because i installed it and got bootloop, and i cant even figure a way to fix it so i guess my phone is just a brick because of that
Click to expand...
Click to collapse
I don't know when removed fastbootd exactly. I think still there on C.01. Brom was disabled from preloader on C.04 or C.05 beta. Then applied to C.10.
I suppose they do this to have less RMA requests, which still happens with their own firmware....
I really don't know what to suggest you, apart that request support from them...
roldev said:
I don't know when removed fastbootd exactly. I think still there on C.01. Brom was disabled from preloader on C.04 or C.05 beta. Then applied to C.10.
I suppose they do this to have less RMA requests, which still happens with their own firmware....
I really don't know what to suggest you, apart that request support from them...
Click to expand...
Click to collapse
wouldnt disabling a feature that let you restoring the rom make more rma requests since if you softbrick there isnt really a way to restore it? thats like so stupid
Related
Must I change the port to 9008? But how?
It is impossible, but can not unlock the line brush downgrade. Can only use the official release of the unlock tool to unlock, because the millet made some restrictions. To be honest, I hate it!
Andy，xu said:
It is impossible, but can not unlock the line brush downgrade. Can only use the official release of the unlock tool to unlock, because the millet made some restrictions. To be honest, I hate it!
Click to expand...
Click to collapse
I can't understand your meaning. I have unlocked the BL, should get to the 9008 i think. :cyclops:
you will get 9008 in edl mode
flash problem(soft brick)
I flashed my phone with resurrection remix rom(was working very fine),then i deleted all the files through the twrp (advance wipe option). It said there is no OS (probably deleted the whole phone memory).So i re-flashed the resurrection remix rom, and now the phone works, but cant detect sim or the wifi signals.(probably messed up with the modems). how should i fix this problem? please reply , thanks in advance.
Kvnjcob434 said:
I flashed my phone with resurrection remix rom(was working very fine),then i deleted all the files through the twrp (advance wipe option). It said there is no OS (probably deleted the whole phone memory).So i re-flashed the resurrection remix rom, and now the phone works, but cant detect sim or the wifi signals.(probably messed up with the modems). how should i fix this problem? please reply , thanks in advance.
Click to expand...
Click to collapse
Try flashing the latest firmware available. This might solve the issue. You can find the firmware download links here. Use global stable.
Thanks @ArK96
Kvnjcob434 said:
Thanks @ArK96
Click to expand...
Click to collapse
So I assume it worked. :good:
Glad I could help.
ArK96 said:
So I assume it worked. :good:
Glad I could help.
Click to expand...
Click to collapse
I actually did the same and it worked ..
ArK96 said:
Try flashing the latest firmware available. This might solve the issue. You can find the firmware download links here. Use global stable.
Click to expand...
Click to collapse
i did the same stuff he did. but i want to go back to miui how can i do it? from RR.
i did have a backup of miui before going to RR.
but it ask me for my password and i put the password that i have in miui that was 1422 but isn't accepting it in the backup of twrp
and now i;m stuck with can't load system.img via fastboot (never had this problem with Mi3)
Jctatis said:
i did the same stuff he did. but i want to go back to miui how can i do it? from RR.
i did have a backup of miui before going to RR.
but it ask me for my password and i put the password that i have in miui that was 1422 but isn't accepting it in the backup of twrp
and now i;m stuck with can't load system.img via fastboot (never had this problem with Mi3)
Click to expand...
Click to collapse
If you want to know the know-how of how to revert back to stock MIUI configuration then you are asking me to duplicate a work of another XDA member and am not of a fan of doing that. :silly:
What I mean is just visit @sachin n 's index thread and you will find the answer to your question.
Sachin's thread will definitely help you.
Regards.
ArK96 said:
If you want to know the know-how of how to revert back to stock MIUI configuration then you are asking me to duplicate a work of another XDA member and am not of a fan of doing that. :silly:
What I mean is just visit @sachin n 's index thread and you will find the answer to your question.
Sachin's thread will definitely help you.
Regards.
Click to expand...
Click to collapse
Thank, in the end I just needed a "mfastboot" archive since is for higher system images. Really thank for taking the then to tag and answer
Hello guy, I was trying to add new custom ROM of lineageos 15.1 in my phone. So I flashed TWRP and successfully installed custom rom lineageos 15.1 with root addon on my phone.
It was working very well, but due to lots of apps, it is getting slower. So I downloaded titanium backup pro (Cracked One) to remove the pre-installed apps of Google.
When I just installed the titanium backup pro app, it restarts my phone, and my phone stopped working (stuck at TWRP recovery screen). So I thought to reinstall the lineageos 15.1. But this time whenever I try to install the file, it sends me back to the starting point of TWRP recovery mode.
So I got pissed off and opened the SP FLASH tool to remove TWRP, but I don't have any idea how to remove it, so I go to the format section of sp flash tool and format the phone.
Now I tried to power on my device, but it wasn't showing a logo of TWRP or Lenovo it was just a black screen. So I figure out by googling that my phone is hard bricked so I tried to flash the Lenovo a7000 framework with SP Flash Tool, but nothing worked out.
So here I am asking for help in XDA Developers Forum. Please help me out I will not get any other phone till my JEE Advanced Exam
sahilsuman said:
Hello guy, I was trying to add new custom ROM of lineageos 15.1 in my phone. So I flashed TWRP and successfully installed custom rom lineageos 15.1 with root addon on my phone.
When I just installed the titanium backup pro app,
...
So here I am asking for help in XDA Developers Forum. Please help me out I will not get any other phone till my JEE Advanced Exam
Click to expand...
Click to collapse
Oh man, I'm sorry to hear that...
But unfortunately I don't think I can help you with that, I mean, if I understand, you erased TWRP recovery, and you can't enter fastboot mode so I don't how we can install anything on it...
That sucks!
If you really need a phone, try to get an extra cheap clap phone to deal with calls an SMS, and to manage your Google account use a PC.
Except that, I can't help you anymore.
Stay strong :highfive:
RaiZProduction said:
Oh man, I'm sorry to hear that...
But unfortunately I don't think I can help you with that, I mean, if I understand, you erased TWRP recovery, and you can't enter fastboot mode so I don't how we can install anything on it...
That sucks!
If you really need a phone, try to get an extra cheap clap phone to deal with calls an SMS, and to manage your Google account use a PC.
Except that, I can't help you anymore.
Stay strong :highfive:
Click to expand...
Click to collapse
sahilsuman said:
Click to expand...
Click to collapse
Don't worry, maybe some people will answer and will know a solution
RaiZProduction said:
Don't worry, maybe some people will answer and will know a solution
Click to expand...
Click to collapse
Bro, I fixed that phone.......xD <3
sahilsuman said:
Bro, I fixed that phone.......xD <3
Click to expand...
Click to collapse
Great! Tell me, how did you do that ?
RaiZProduction said:
Great! Tell me, how did you do that ?
Click to expand...
Click to collapse
I Got the original firmware of my phone and i just installed it and Damnn...!! It worked
sahilsuman said:
I Got the original firmware of my phone and i just installed it and Damnn...!! It worked
Click to expand...
Click to collapse
You're so lucky, I'm legit happy for you :highfive:
RaiZProduction said:
You're so lucky, I'm legit happy for you :highfive:
Click to expand...
Click to collapse
Thanks, man but I need a new custom ROM for android version 8.1.I tried carbon,LineageOs, RR Os and many other but all the roms having the same problem (No Service on airtel) can you please help me out and tell me the best custom rom for lenovo a7000-a..???
Recently i downgraded MI A3 android 10 to 9 because of bugs and end up the sensors are not working anymore.
#proximity sensor
#light sensor
#gyro and compass is not detected following downgrade.
does anyone know how to fix this or anyone could downgrade without having sensor issues?
please share
thank you.
chachasl said:
Recently i downgraded MI A3 android 10 to 9 because of bugs and end up the sensors are not working anymore.
#proximity sensor
#light sensor
#gyro and compass is not detected following downgrade.
does anyone know how to fix this or anyone could downgrade without having sensor issues?
please share
thank you.
Click to expand...
Click to collapse
You must flash the persist partition with twrp. You can find a tutorial at the 4pda site
I am having the same problem.. any solution??
Thanks in Advanced..
I read on a latin facebook page, that you need to install some rom, the majority agrees with miui 11 to start it, to activate the usb depuration and to install the global and european stock android one 9.0 rom and that the problem is corrected, i do not correct why the process has to be that.
lozada81 said:
I read on a latin facebook page, that you need to install some rom, the majority agrees with miui 11 to start it, to activate the usb depuration and to install the global and european stock android one 9.0 rom and that the problem is corrected, i do not correct why the process has to be that.
Click to expand...
Click to collapse
Can you explain More or give me the link
chachasl said:
Recently i downgraded MI A3 android 10 to 9 because of bugs and end up the sensors are not working anymore.
#proximity sensor
#light sensor
#gyro and compass is not detected following downgrade.
does anyone know how to fix this or anyone could downgrade without having sensor issues?
please share
thank you.
Click to expand...
Click to collapse
Did you use miglash to downgrade?
amnher said:
Did you use miglash to downgrade?
Click to expand...
Click to collapse
No i did not.
Developer option bootloader unlocked and usb debugging activated
Fastboot unlocked using adb fastbioot
And flashed the official fastboot rom using mi flash tool
chachasl said:
No i did not.
Developer option bootloader unlocked and usb debugging activated
Fastboot unlocked using adb fastbioot
And flashed the official fastboot rom using mi flash tool
Click to expand...
Click to collapse
Can you go back to 10? They say just make a backup of persist partition via twrp then flash it
amnher said:
Can you go back to 10? They say just make a backup of persist partition via twrp then flash it
Click to expand...
Click to collapse
Sure i will try..
Solution
Hey, i was facing the same problem... I visited the MI Customer Care, they had no idea, all they said is that my sensors are broken, i will have to change them...
But Updated it to official Android 10, and the sensors are back again..
Follow this link: https://www.the***********.com/xiaomi-mi-a3-android-10-update-guide/
Hope this works for you...
chachasl said:
Recently i downgraded MI A3 android 10 to 9 because of bugs and end up the sensors are not working anymore.
#proximity sensor
#light sensor
#gyro and compass is not detected following downgrade.
does anyone know how to fix this or anyone could downgrade without having sensor issues?
please share
thank you.
Click to expand...
Click to collapse
Facing same issue here please help.
aadienriq said:
Facing same issue here please help.
Click to expand...
Click to collapse
Flash any custom rom (PE in my case), then flash stock rom again....
I still can't get the sensors to work. Tried flashing PE 10 through twrp then mi flash Android 9 via fastboot. Still no working sensors for my Android 9. pls post detailed guide on how you were able to downgrade to stock pie.
sioneng said:
I still can't get the sensors to work. Tried flashing PE 10 through twrp then mi flash Android 9 via fastboot. Still no working sensors for my Android 9. pls post detailed guide on how you were able to downgrade to stock pie.
Click to expand...
Click to collapse
So basically, i updated to stock android 10, realised it was a mistake, flashed stock 9 via fastboot, lost sensors, installed orangefox rexovery and flashed latest PE, while in PE i tested the sensors and they were fully working, flashed stock 9 via fastboot again and everything is fine now. That was it.
Every time The same story. Before the update every user want it like a question of life or death. After ask how to downgrade. LoL
eltonb said:
So basically, i updated to stock android 10, realised it was a mistake, flashed stock 9 via fastboot, lost sensors, installed orangefox rexovery and flashed latest PE, while in PE i tested the sensors and they were fully working, flashed stock 9 via fastboot again and everything is fine now. That was it.
Click to expand...
Click to collapse
I see, i was able to flashed PE (A10) and all sensors are working. but when i miflash back to android 9 global version same problem.
---------- Post added at 02:13 PM ---------- Previous post was at 02:11 PM ----------
wetito said:
Every time The same story. Before the update every user want it like a question of life or death. After ask how to downgrade. LoL
Click to expand...
Click to collapse
so what's your contribution then with this thread?
sioneng said:
I see, i was able to flashed PE (A10) and all sensors are working. but when i miflash back to android 9 global version same problem.
---------- Post added at 02:13 PM ---------- Previous post was at 02:11 PM ----------
so what's your contribution then with this thread?
Click to expand...
Click to collapse
Strange, i've used the method twice now with success. Are you using the official march fastboot rom from xiaomi and the latest platform tools?
Sapper Morton said:
@sioneng @eltonb
You guys are missing an important step; for the downgrade to be successfully done, you must come from a custom Android 10 ROM for Pie vendor, as such only the official PX is eligible, not the unofficial by nullby, because the latter uses Stock 10 firmware, vendor included.
I suspect it's because dtbo.img, since it carries hardware information to the Linux Kernel, thus the sensors would be targeted.
You can use any custom ROM that matches the requirements, as such the EvolutionX by chaplindev; but I do recommend to use PX Official build, just because that's what I used to recover my sensors back; download is available here.
Click to expand...
Click to collapse
That's the one i used both times and successfully restored the sensors..
Solved
Just Download laurel_sprout_global_images_V10.3.4.0 This Rom and Flash .....I think everything will work fine.
When i tried others like v10.3.16.0... Also facing same issue.
Sapper Morton said:
@sioneng @eltonb
You guys are missing an important step; for the downgrade to be successfully done, you must come from a custom Android 10 ROM for Pie vendor, as such only the official PX is eligible, not the unofficial by nullby, because the latter uses Stock 10 firmware, vendor included.
I suspect it's because dtbo.img, since it carries hardware information to the Linux Kernel, thus the sensors would be targeted.
You can use any custom ROM that matches the requirements, as such the EvolutionX by chaplindev; but I do recommend to use PX Official build, just because that's what I used to recover my sensors back; download is available here.
Click to expand...
Click to collapse
Nice! i got my mi a3 sensors back. I was using the wrong PE rom . thanks for all your help guys.
@Sapper Morton @eltonb
Hi,i have samsung A205F/DS
Security patch level:1 december 2020
Baseband version:A205DDS9BTL1
my bootloader is locked and i want to install custom recovery.Can anybody help me?
I know all basic instructions about installing gsi but not about recoveries.
Official orange fox recovery is available for my phone but i dont know how to install it.
I also read forums on how to install twrp but i am confused that which file i have to flash using odin and whether or not it will brick my phone.
Please tell me how to unlock the bootloader and which twrp file i have to flash according to my security patch and baseband version.
Hello,
This video is step by step, the procedure applies to the A20 but obviously using the corresponding software for the A20
sercari said:
Hello,
This video is step by step, the procedure applies to the A20 but obviously using the corresponding software for the A20
Click to expand...
Click to collapse
Bro i dont even have twrp installed like your A51
Jinx650 said:
Bro i dont even have twrp installed like your A51
Click to expand...
Click to collapse
Excuse me, see it from the beginning, as I said, the method applies to A20
sercari said:
Excuse me, see it from the beginning, as I said, the method applies to A20
Click to expand...
Click to collapse
Jinx650 said:
Bro i dont even have twrp installed like your A51
Click to expand...
Click to collapse
Ok now i just need twrp file for my december security patch but in your video of unlocking bootloader you didn't used any software in pc did you?
Jinx650 said:
Ok now i just need twrp file for my december security patch but in your video of unlocking bootloader you didn't used any software in pc did you?
Click to expand...
Click to collapse
Exactly, you just have to enable the developer options and there turn on debugging and OEM and and wait until the oem letters turn gray.
[Guide] Quick root and TWRP for the Galaxy A20 (Android 9,10 & 11)
WARNING: Rooting your phone may be dangerous. Rooting a device may void the warranty on the device. It may also make the device unstable or if not done properly, may completely brick the device. XDA-Developers or the author does not take any...
forum.xda-developers.com
Hello all,
I plan to get a OnePlus 10T soon UNLOCKED model.
What are my prospects for installing a custom ROM now or in the future? I had a OP 9 a few months ago & only had it for a short time.
Regards
LC
We don't have a MSM tool which would allow us to restore the device from bricking... Until there is an alternative method to recover.... We might not see the custom ROM development.... Thanks to the OP becoming OPPO (or vice versa) and the greedy mindset of blocking stuff...OP is no longer dev friendly but yet another ******* company
How long would it take? It's a really powerful device
SREEPRAJAY said:
We don't have a MSM tool which would allow us to restore the device from bricking... Until there is an alternative method to recover.... We might not see the custom ROM development.... Thanks to the OP becoming OPPO (or vice versa) and the greedy mindset of blocking stuff...OP is no longer dev friendly but yet another ******* company
Click to expand...
Click to collapse
Have the devs moved to another phone? Any chance of getting a flagship phone with good ROMs in the next 8 months?
SREEPRAJAY said:
We don't have a MSM tool which would allow us to restore the device from bricking... Until there is an alternative method to recover.... We might not see the custom ROM development.... Thanks to the OP becoming OPPO (or vice versa) and the greedy mindset of blocking stuff...OP is no longer dev friendly but yet another ******* company
Click to expand...
Click to collapse
That's disappointing. Just got my OnePlus 10T recently.
LiaFourté said:
That's disappointing. Just got my OnePlus 10T recently.
Click to expand...
Click to collapse
Would you still suggest getting a 10T ? I like Oxygen OS & the UI of it
I don't understand, but how are the msm tool and custom rom related?
serjann said:
I don't understand, but how are the msm tool and custom rom related?
Click to expand...
Click to collapse
Yeah I thought so too. Even when I had my OP 9 I never bricked it
serjann said:
I don't understand, but how are the msm tool and custom rom related?
Click to expand...
Click to collapse
I would guess that when you develop a custom ROM, the chances of bricking your phone is significantly higher than when you flash a custom ROM someone has already made
LiaFourté said:
That's disappointing. Just got my OnePlus 10T recently.
Click to expand...
Click to collapse
Fastboot can unbrick it
AkayamiShurui said:
Fastboot can unbrick it
Click to expand...
Click to collapse
If you can't get to fastboot, you need msm and you put your phone on EDL mode. I had to do this numerous times on my 8T. It's a clean and safe way to get back to stock in almost any situation.
I reflash my phone back to stock with fastboot.
AkayamiShurui said:
I reflash my phone back to stock with fastboot.
Click to expand...
Click to collapse
what model do you have?
luckychukiye said:
what model do you have?
Click to expand...
Click to collapse
Cph2417
AkayamiShurui said:
Cph2417
Click to expand...
Click to collapse
You were able to flash stock on that model with fastboot? What zip file did you use? US incremental OTA? EU Full OTA?
Jager said:
You were able to flash stock on that model with fastboot? What zip file did you use? US incremental OTA? EU Full OTA?
Click to expand...
Click to collapse
So Google's get suppository for Android actually has a tool for extracting the boot images from your device so I did that and I'm currently running back on stock with a locked bootloader
AkayamiShurui said:
So Google's get suppository for Android actually has a tool for extracting the boot images from your device so I did that and I'm currently running back on stock with a locked bootloader
Click to expand...
Click to collapse
Could you post the boot file and version you used? You flashed the boot image and then all the rest of the images? Do you have the commands for every image you flashed?
If I remember I'll do it once I get out of work but that's a little ways away still but I would just recommend doing it yourself by extracting your own boot images I can and send you a link if I get time if now I'll try to remember after work.
AkayamiShurui said:
So Google's get suppository for Android actually has a tool for extracting the boot images from your device so I did that and I'm currently running back on stock with a locked bootloader
Click to expand...
Click to collapse
So you didn't flash the entire stock rom? Just the boot image? It is not clear.
For unbricking entire rom is usually needed so I was looking for examples of a full stock rom flash.
I am also looking for a stock version for CPH2417... payload.bin would be amazing.
I softbricked (bootloop) and had to use the CPH2413 (India) software (not good)