Hi guys, I'm asking for some help. The car is an e46 with harman music, we installed android navigation, everything started, there is a picture, there is sound and tnt. However, when I connect the canbus to the coil, the multi steering wheel works and the coil buttons light up, but when I remove the ignition from the car (even removing the key), the navigation still works and the dashboard (of the car) does not go out. When I removed the canbus, everything is fine (but the buttons on the coil don't light up and the multi doesn't work).
My question is:
-Why, when I put the canbus into ignition and remove the key from the ignition, ignition does not stop working and the dashboard of the car does not go out.
I think the canbus is screwed up.
Viksana096 said:
Hi guys, I'm asking for some help. The car is an e46 with harman music, we installed android navigation, everything started, there is a picture, there is sound and tnt. However, when I connect the canbus to the coil, the multi steering wheel works and the coil buttons light up, but when I remove the ignition from the car (even removing the key), the navigation still works and the dashboard (of the car) does not go out. When I removed the canbus, everything is fine (but the buttons on the coil don't light up and the multi doesn't work).
My question is:
-Why, when I put the canbus into ignition and remove the key from the ignition, ignition does not stop working and the dashboard of the car does not go out.
I think the canbus is screwed up.
Click to expand...
Click to collapse
Hello and good morning, @Viksana096
Welcome to XDA. I hope you'll always get the support you require.
However, prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved your thread to Android Q&A.
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
Related
Hoi,
is it possible to map he sound to a connected BT-Headset ?
Actual i am using a X2G from Pearl (2.2.1) with a Motorola BT-Headset.
Pairing and connecting is working well, but -off course- no sound appears on the headset.
I am using IVT, all other devices like Handy, NB etc. will work fine with filetransfer,DUN, etc.
Doei
Franz
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
Hello. First of all I'd like to say thay I had searched the threads as well as play store and google, and did not find any sufficient data on the matter.
I am running Ultima custom ROM on my Galaxy S3 i9300, I might have asked in the ROM thread section, but I am fairly sure this will not be ROM related, more like app related.
I recently bought a stand alone bluetooth keyboard slider case, that my SGS 3 fits in, but it forces me to keep bluetooth enabled all the time. Thus, my Sony Smartwatch that I use keeps connecting all the time via bluetooth as well. Now up to this point I used the bluetooth connection on the smart watch only when needed, for example while driving to switch songs (since the SGS 3 is docked as GPS, channeled by AUX to the car radio), which enabled me to preserve most of the watch battery power (charged it once a week, even less). Now, whenever I have the watch near the phone it will randomly connect on its own, or I make it connect by tapping it one time too many.
Now the question, is there an app somewhere that lets me filter my connected bluetooth devices, and let's say restrict the smart watch on my demand? Any info how to obtain selective bluetooth connectivity, I welcome.
please don't ask questions in this section
I feel like a moron, why didn't I post this in the Q&A -_-'' I'm sory...
I have a Samsung galaxy note 10 plus, which is rooted with magisk if that makes any difference. My car only supports calls. I want to stream my music, as though it is a call, to my car. I have considered setting up a ras pi with some program I'm sure I could make to get it to streak music it takes from the Bluetooth of my phone, to a call that is connected back to my phone and therefore coming through the car. But I would rather find some way to use only my phone. I have tried a few Bluetooth mono router apps but they are either inconsistent or don't work at all, unless I am missing something. If it makes any difference I ideally want to stream via yt music vanced however I have been testing with other apps also.
Any help much appreciated
Ethan954 said:
I have a Samsung galaxy note 10 plus, which is rooted with magisk if that makes any difference. My car only supports calls. I want to stream my music, as though it is a call, to my car. I have considered setting up a ras pi with some program I'm sure I could make to get it to streak music it takes from the Bluetooth of my phone, to a call that is connected back to my phone and therefore coming through the car. But I would rather find some way to use only my phone. I have tried a few Bluetooth mono router apps but they are either inconsistent or don't work at all, unless I am missing something. If it makes any difference I ideally want to stream via yt music vanced however I have been testing with other apps also.
Any help much appreciated
Click to expand...
Click to collapse
@Ethan954 Welcome to XDA. I hope you'll always get the support you require.
Prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
I've moved the thread to Android Q&A.
Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator
Hello everyone, I’m and audio engineer and not a developer, but I thought you guys might be able to help me with something.
I purchased a android unit for my car (2016 Range Rover), it uses the cars factory audio system, it can mirror the stock screen to the new android screen (for access to settings and cameras), and it feeds its audio output to the Aux input of the car or Bluetooth from the android to the cars factory Bluetooth.
Everything functions beautifully, however the sound quality is terrible. There is a “DSP” screen in their GUI, when adjusting any of the parameters I can tell the DSP / EQ is possibly the cause of the issue.
I downloaded an app that shows hidden apps and found “MagicEQ” installed, I disabled it but the audio continues to sound the same.
I’m wanting to disable any processing of the audio and simply send an unmodified audio signal out of the android via it’s analog output and/or it’s Bluetooth connection.
My questions are:
-Is there anywhere else I can look to see if there are any other hidden EQ settings?
-any tips on how to find any other apps or processes that could be tampering with the audio signal?
-are there any apps that could be installed that would override any audio processing that’s currently happening?
Sound777 said:
Hello everyone, I’m and audio engineer and not a developer, but I thought you guys might be able to help me with something.
I purchased a android unit for my car (2016 Range Rover), it uses the cars factory audio system, it can mirror the stock screen to the new android screen (for access to settings and cameras), and it feeds its audio output to the Aux input of the car or Bluetooth from the android to the cars factory Bluetooth.
Everything functions beautifully, however the sound quality is terrible. There is a “DSP” screen in their GUI, when adjusting any of the parameters I can tell the DSP / EQ is possibly the cause of the issue.
I downloaded an app that shows hidden apps and found “MagicEQ” installed, I disabled it but the audio continues to sound the same.
I’m wanting to disable any processing of the audio and simply send an unmodified audio signal out of the android via it’s analog output and/or it’s Bluetooth connection.
My questions are:
-Is there anywhere else I can look to see if there are any other hidden EQ settings?
-any tips on how to find any other apps or processes that could be tampering with the audio signal?
-are there any apps that could be installed that would override any audio processing that’s currently happening?
Click to expand...
Click to collapse
Hello and good afternoon, @Sound777
Welcome to XDA. I hope you'll always find and get the solution you require.
However, prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved your post to Android Q&A.
Thanks for your cooperation!
Regards
Oswald Boelcke
Oswald Boelcke said:
Hello and good afternoon, @Sound777
Welcome to XDA. I hope you'll always find and get the solution you require.
However, prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved your post to Android Q&A.
Thanks for your cooperation!
Regards
Oswald Boelcke
Click to expand...
Click to collapse
My apologies, thank you for moving it. I look forward to hearing thoughts / advice from you all.
Thanks!
So I have the ipega 9217 controller and I wanted to play PUBG with the shootingplus v3 app to map the keys and the app updated my controller firmware and now it's useless, I tried formatting it with a sim tool and it didn't do anything. my controller flashes cyan coloured leds when power button is pressed. It also is undetectable on bluetooth and wired via USB, only shootingplus v3 detects it with a message saying (abnormal equipment detected) and it says its fully up to date. Anyone know a fix to this? (Sorry for bad grammar)
adfunny said:
So I have the ipega 9217 controller and I wanted to play PUBG with the shootingplus v3 app to map the keys and the app updated my controller firmware and now it's useless, I tried formatting it with a sim tool and it didn't do anything. my controller flashes cyan coloured leds when power button is pressed. It also is undetectable on bluetooth and wired via USB, only shootingplus v3 detects it with a message saying (abnormal equipment detected) and it says its fully up to date. Anyone know a fix to this? (Sorry for bad grammar)
Click to expand...
Click to collapse
Hello and good afternoon, @adfunny
Welcome to XDA. I hope you'll always get the support you require.
However, prior to your next posting please read the guidances that are stuck on top of every forum like
[Read Before Posting]QUESTIONS DO NOT BELONG IN GENERAL
Hello Everybody, In order to attempt to keep this forum neat and tidy the moderation team is asking you to post your questions into the Questions and Answers (Q&A) forum and not into the General section. You can find the Q&A forum by clicking...
forum.xda-developers.com
and the others. I've moved your thread to Android Q&A.
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
iPega Wireless Bluetooth 3.0 Game Controller
iPega Wireless Bluetooth 3.0 Game Controller came today off ebay half the price of others :victory: was going to use it with my android phone it also works with most phones with bluetooth and came with no drivers or software to install so easy to...
forum.xda-developers.com