Can anyone tell me the software component that causes the volume to be reduced approximately every 24 hours and pops up an alert when you try to restore the volume above the recommended level? I have a routed phone and I wish to suppress this.
Thanks in anticipation.
Forgot to mention, I'm on Android 11.1.1
Related
I spend most my time in a library with in-ear headphones and the lowest volume is just too loud for me. Is there any way to change the volume rocker's (or slider's) increments?
I'm using Vegan 5.1.1
Sorry Hachi, I dont have an answer for you.
But I am bumping this post up because I have the same problem.
Also took 5 minutes of searching to find this post.
Has anyone found a solution to this yet?
Thanks
Tnt Lite. I had vegan before and lowest setting is still loud. Tnt Lite works. Just do a backup first and try TNT
I would also like to know if there is a solution for this. I am currently running VEGAN 5.1 and when I listen to music only the first half of the media volume does anything. From half to full I dont really notice a difference. I would like to be able to properly spread it out so when I turn it up the max volume on the screen is also the max volume of the device.
I am using TNT Lite 4.4 and noticed the volume is very low until the last setting, not a linear curve.
try using Quick Settings from the market. it allows you to tweak the volume a whole lot more than the stock settings menu.
fidju said:
try using Quick Settings from the market. it allows you to tweak the volume a whole lot more than the stock settings menu.
Click to expand...
Click to collapse
This does help with system level volume items, but as far as media being played even at 1/10 the volume is too loud.
Fortunately using my blue-tooth headphones I have found I can use the in-line volume control to make it a reasonable level. I just don't know what I will do on an airplane.
Can you keep your BT awake while the screen is off?
merril said:
This does help with system level volume items, but as far as media being played even at 1/10 the volume is too loud.
Fortunately using my blue-tooth headphones I have found I can use the in-line volume control to make it a reasonable level. I just don't know what I will do on an airplane.
Click to expand...
Click to collapse
xddy1979 said:
Can you keep your BT awake while the screen is off?
Click to expand...
Click to collapse
Running vegan 5.1
I just tested with locking the screen and had no problems playing music with the stock player, tested for around 12 minutes. After that i set my sleep to 2 minutes, started a song and walked away with the screen still on. The screen went to sleep but the music kept playing, tested for two songs.
Good question and sorry I don't have an answer, but I'm glad you asked. I've seen huge volume differences in different apps. For example, Angy Birds is too loud for quiet settings even at the lowest volume level while some web sites are too low even at the highest settings.
Try the free poweramp app in the market. Go into the eq settings and adjust output. This solved a volume issue for me
Hello All,
I need some help, I had a broken screen and when I replaced it I managed to break both the side volume buttons!
Now I can live with this until I order a replacement ribbon but since I don't have the side volume buttons any more I cannot adjust the speaker volume while i'm making a phone call and it's set to quite low at the moment.
Does anybody know what the program is called so I can invoke it set it to max and close it or at least the registry value that controls this?
Please note both system and ringer volumes are set to max through the device settings, it's the volume during a call I wish to increase...
Thanks in advance!
Did I ask the only un-answerable question in this entire forum?!?!
Put "windows mobile volume setting" into google. The first two links give you some freeware apps that allow you to edit volume on the screen itself.
SOLUTION FOUND - TESTING -> http://forum.xda-developers.com/showthread.php?t=1411317
I'll provide a better tutorial for those interested when im done testing it ;-) seems i can build a custom Framework.jar with edited volume increments.
I'm running cm7 from cm9, I listen to alot of music during the day and night but I find the volumes at the high end of the range perfect but the volumes down the low end to stark.
The gaps between 0 and 1 is no sound and then considerably loud in a quiet environment, is this a kernel related volume incriment or set by the code in cm7 somewhere?
I can't find an app to add what I'd call analouge volume control ( finer increments in DB from 0 to MAX)
Any ideas guys?
Click to expand...
Click to collapse
--------------------------------------------------------------------------------------------------------------------------------------
Deleted...
not to threadjack but how do you even use the high volume? at a volume level of 1 with my TripleFi 10 Pros is as loud as I wanna get.
I plug my SGS2 into the car and I can't go anywhere above 1/4. It's as loud as my Nexus S on FULL, and same with my iPod touch. the sound output is ridiculously loud.
Deleted...
MistahBungle said:
This is a well known (and annoying because I use a rom that's a CM derivative) issue. I've learned to live with it & don't really want to run a standalone app just to give me fine control of volume levels, however, I found this on my travels recently. I haven't tried it, but this might be a good starting point for apps to try.
Click to expand...
Click to collapse
Nice find I tried about 8 apps last night, also considered a voodoo sound esque fix but we know the sgs2 has not got the correct hardware.
unless there is a voodoo sound kernel for cm7 out there but all kernels I try with cm7 give me a corrupt boot to the boot logo and then crashes and I have to hard reset.
CM7 is horrid for 3rd party Kernel support.
MistahBungle said:
Since I started using the app in my sig, I only need volume on around 25-30% thru in-ears. Before that I'd have it on 80% or so. SGS2 (maybe not all, could be manufacturing variations .
Thats what i see manufacture variations .
Stock phone stock headphones no sound change apps volume level at 50% is far to high on my phone . Its an original day one released phone .
jje
Click to expand...
Click to collapse
Deleted...
MistahBungle said:
Supercurio has released Voodoo Louder for SGS2 which also boosts headphone/headset volume (by 6dB), but it doesn't give you that fine volume control.
And as JJE said in his post, with the experiences reported by SGS2 owners on here, this volume issue would appear to be a manufacture issue/dependent on which 'batch' your phone came from.
Click to expand...
Click to collapse
I'd like to call that unreliable information, as I never had this issue with Cognation ROM, its only become a issue with the Current CM7.1.
I'd take a look into this but I have no experience into editing the android system short of using command sin Terminal Emulator and ADB.
There must be a scale somewhere that relates to the number of volume increments and the DB output, after all there is a law regarding maximum volumes of devices in the EU and OEM's adjust there in their hardware dependant on Region, so the DB values can be adjusted some how, I just need to know where i can find it.
EDIT : This works on some handsets not my SGS2 !
Dial in *#*#197328640#*#*
Next, tap your finger onto the following, in the following order:
[5] Audio
[1] Handset
[1] Volume
[1] SRS Speech RX Volume
next notice the following defaults that pop up.
[0]0_lvl:63
[1]1_lvl:68
[2]2_lvl:73
[3]3_lvl:78
[4]4_lvl:83
[5]5_lvl:88
This basically means, that your volume up and down keys have 5 clicks, starting from the lowest setting, and click your volume up 5 times, takes you through the sequence of volumes listed above. You can change each click to be a new volume setting. For me 1-4 are fine, I just wanted max volume, which is click number 5, to be something higher. The phone does not let you to put in half increments, meaning 88.5 is not possible. So you have to use increments of 1. Please please do this carefully, dont suddenly jump to 95, you could blow out your speaker possibly. So I tried just 1 increment above 88, went to 89, and perfect, much louder now! okay so this is how you do it:
Once you get the list above, do the following:
Click your finger on [5]5_lvl:88
Next, a screen pops up asking for input. On the bottom of your phone, tap the menu button, this is the button next to the little home button.
Next tap "key input"
Next tap 1 increment at a time, lets start off with 89 so where it says enter value, tap this, your keyboard pops up, type in 89
Next Tap your menu button again
Next Tap "end"
you are now finished, make a phone call and see how 89 works for you, when your volume is set to max
Remember this volume adjustment seems to reset after you reboot the phone. Some people online are saying you can also make the volume higher by playing with the hearing aid settings, I personally haven't tried this yet.
Deleted...
MistahBungle said:
You can call the volume loudness issue anything you want. But given the experiences of people who have posted here over the past however many months, that is what these experiences suggest.
This is what JJE & I were talking about when we mentioned the manufacture thing.
Not the fine volume issue.
Indeed, that seems to be prevalent on CM based roms. I don't recall having any problems increasing volume in small increments for the < 1 week I ran stock firmware on my phone after I bought it.
As I've said, it's not a big enough deal for me to use a standalone app, so it's definitely not a big enough deal for me to muck around with dialer codes. I saw these codes months ago before I even bought my phone, and never bothered with them. The fine volume control doesn't really bother me, I just thought I'd reply to you OP given you were after an app that enables same, and I'd found the app I gave you a link to recently.
Click to expand...
Click to collapse
That app did nothing, I used it and it gave me the same options as DSP gives you from CM.
The not high enough volume issue can easily be solved in CM7 but comment about that has hijacked my thread, im looking into how we can edit the fine volume adjustment or edit the increments to go from MAX to MIN volume.
Service codes don't appear to work on my handset ( CM related ? ) but I believe the service mode is built into the framework.
Hello,
S3 is my first smartphone ever, so please be patient
Since I'm a student, I put my phone on mute during the classes (through the notification bar).
However, it happened to me twice now that accidental touch on volume up hard key took me out of mute. This is of course undesirable... Is there a way to disable this function of volume-up key?
I want to remain muted until I cancel it on notification bar.
Thanks!
bump... can anyone help?
Sad....it remains a big drawback of the android phones that we cant make different profiles for volume like Nokia phones......
I think you can only do this by finding a tone with no sound and setting it for all the alerts manally from sound setting before entering your class room
anyhow this is a good question and hope some devs can desable vol- button for enabling full vol. back
Thanks...
but modifying it manually at the beginning of each class, then again at the end, is not very comfortable.
Perhaps it can be fixed with a mod? something like that:
- clicking volume up if phone is not muted increases the volume, as usual.
- clicking volume up if phone is muted doesn't do anything.
Hi all
I recently purchased a new THL W11 32GB phone and I'm happy with it besides 2 problems:
1 it restarts automatically every once and a while, about once a day or two
2 the media volume is too low, I've entered to engineering mode and increased it to maximum but it is still not enough
Do you have any experience with those issues?
Do you think that another ROM may help?
If so, any recommendations? I need one that supports Hebrew language
Thanks
Shlomi
shlomiweiss said:
the media volume is too low, I've entered to engineering mode and increased it to maximum but it is still not enough
Click to expand...
Click to collapse
I am on the THL website to see, don't know can use.
Increase the volume on the headphones:
1. Enter the engineering menu:
Two. Select Audio> Headset mode.
Three. Leave selected Type -> Sip
Values are changed:
Max Vol - 160
And here I put values ??from 0 to 255 with equal intervals for each level:
Level 0-0
Level 1-43
Level 2-85
Level 3-128
Level 4-171
Level 5-215
Level 6-255
Raise the speaker volume:
1. Enter *#15963#* engineering menu:
Two. Select Audio> Loudspeaker mode
This removes the link HTCMania tricks and modifications.
shlomiweiss said:
1 it restarts automatically every once and a while, about once a day or two
Click to expand...
Click to collapse
Good day everyone. Have the same problem. Does anyone find a solution?