I have the Mi Pad 5 Pro 5G (enuma) .
1. As far as i know - there is no TWRP available for enuma? Am i right?
2. Can i savely flash the nabu-TWRP? Have anyone successfully done this?
3. I debloated my 5G Tablet from Bloatware/Google/etc. - I realized that i can´t make phone calls. Is this my fault (to much debloated) or is it a Rom related topic that this is not possible?
relevant advice is very much appreciated!
Kind regards
@Phoenix_777 Welcome to enuma club.
1. Correct.
2. What nabu-TWRP are you talking about? I have tried only nabu-recovery to flash nabu-A12 Arrow. Somehow it worked and could flashed nabu-Arrow to my enuma device and boot up.
3. Mi Pad 5 Pro 5G (enuma) cannot make phone call only receive messages (or mms) and use 5G internet. This is due to the firmware that locks this function or make it unavailble. I am using GSI ROM with phone call app and still cannot make phone call on enuma.
siamese007 said:
@Phoenix_777 Welcome to enuma club.
1. Correct.
2. What nabu-TWRP are you talking about? I have tried only nabu-recovery to flash nabu-A12 Arrow. Somehow it worked and could flashed nabu-Arrow to my enuma device and boot up.
3. Mi Pad 5 Pro 5G (enuma) cannot make phone call only receive messages (or mms) and use 5G internet. This is due to the firmware that locks this function or make it unavailble. I am using GSI ROM with phone call app and still cannot make phone call on enuma.
Click to expand...
Click to collapse
you can't install nabu one since it has different soc
Thanks a lot!
Related
I got a Redmi Note 2 from an overseas supplier. It had the location locked to China in settings and I had read in forums that resellers often load rouge ROMS before shipping them to Australia.
There was a newer version official ROM on the MIUI website as follows:
Author: MIUI Official TeamVersion: V7.1.3.0.LHMMICK (MIUI7) Size: 935M
I downloaded this ROM and installed it using the Recovery mode method detailed on the website (in the hope that this would ensure that Official ROM would not be compromised by the old ROM.
It installed OK, but now the phone can't access the Australian Optus Mobile network. Pressing the dial button just comes up "Access Denied".
Can someone please tell me what I have to do get the phone working properly again?
Redmi Note 2 can no longer access Optus mobile network
I did some further digging and it turns out the phone was actually connecting to the network. The phone dialler app on the home screen was not working for some reason and saying 'access denied'. I deleted it and re-added back and it worked. The network name comes up on he lock screen but not not the home screen for some reason. So it only looked like it is not connecting.
Redmi Note 2 can no longer access Optus mobile network
Xwombat said:
I got a Redmi Note 2 from an overseas supplier. It had the location locked to China in settings and I had read in forums that resellers often load rouge ROMS before shipping them to Australia.
There was a newer version official ROM on the MIUI website as follows:
Author: MIUI Official TeamVersion: V7.1.3.0.LHMMICK (MIUI7) Size: 935M
I downloaded this ROM and installed it using the Recovery mode method detailed on the website (in the hope that this would ensure that Official ROM would not be compromised by the old ROM.
It installed OK, but now the phone can't access the Australian Optus Mobile network. Pressing the dial button just comes up "Access Denied".
Can someone please tell me what I have to do get the phone working properly again?
Click to expand...
Click to collapse
Hello everyone, I have a problem on 2 telefoni.Ho purchased 3 redmi notes 3 pro (SD) for my family, one arrived with Italian and the other 2 no, I upgraded via miflash to my and I mounted version "Note 3 qualcomm last global developer version fastboot" on the official site en.miui.com and work fine on my device.
I then tried to do the same procedure on the other two phones arrived in China and end of the flash without any error and selecting the option to flash, none of the two phones on but at some point I get this error message:
Encryption was interrupted and can't be completed. As a result, the data on your phone is no longer accessible. to resume using your phone you need to perform a factory reset. when you set up your phone after the reset you'll have an opportunity to restore any data that backed up to your google account.
The phone at this point is blocked, dont start.
The bootloader is blocked!!
To remedy I tried to flash another rom, rom work with the other mobile phones but no longer read the sim !!
Now the questions are two:
1) How is it possible that on 3 identical cell and performing the same procedure one works and 2 no ??
2) that I could mount version that has the Italian as the language ??
If you were to continue to have the error not advise me sims to perform the procedure for the recovery dell'imei ?? I checked in the settings and under the written SIM1 and SIM2 is an IMEI code ....
Mandarancino said:
Hello everyone, I have a problem on 2 telefoni.Ho purchased 3 redmi notes 3 pro (SD) for my family, one arrived with Italian and the other 2 no, I upgraded via miflash to my and I mounted version "Note 3 qualcomm last global developer version fastboot" on the official site en.miui.com and work fine on my device.
I then tried to do the same procedure on the other two phones arrived in China and end of the flash without any error and selecting the option to flash, none of the two phones on but at some point I get this error message:
Encryption was interrupted and can't be completed. As a result, the data on your phone is no longer accessible. to resume using your phone you need to perform a factory reset. when you set up your phone after the reset you'll have an opportunity to restore any data that backed up to your google account.
The phone at this point is blocked, dont start.
The bootloader is blocked!!
To remedy I tried to flash another rom, rom work with the other mobile phones but no longer read the sim !!
Now the questions are two:
1) How is it possible that on 3 identical cell and performing the same procedure one works and 2 no ??
2) that I could mount version that has the Italian as the language ??
If you were to continue to have the error not advise me sims to perform the procedure for the recovery dell'imei ?? I checked in the settings and under the written SIM1 and SIM2 is an IMEI code ....
Click to expand...
Click to collapse
Hi Dear, I have same situation like yours
did u find any solution?
best regards
Did you select clean all before flashing ?
Read this thread
https://xiaomi.eu/community/index.php?threads/35527/
I apologize for writing late but I really take long to find the solution to my problem that I have solved the question in a casual mode...!!
I purchased this 3 cell, at the same store but at different time, the first phone is a snapdragon edition, but the other 2 phone are SPECIAL EDITION....
The store sent me the different phones and do not know why, without telling me, the outer box is not clear, bear the same inscription.
I found out by accident, approaching the phones, I realized that one was slightly longer than the other and doing a search I found the measures that explained the difference, are therefore come to the conclusion that the two phones arrived after they were SPECIAL EDITION, would never have started with the Rom Snapdragon, downloaded the correct version everything is back to normal !!
All's well that ends well!!
Thanks!!
My phone's SIM card is not working as expected:
- it is recognized (The phone asks me for the password when he detects the SIM card and code is accepted)
- it says "No service" and of course, I do not get any services (no phone calls, SMS or data)
My history on this device so far (in case it matters):
- This SIM card worked when I received the phone from gearbest (and I upgraded to latest MIUI 8.0.5) and I could make a test call and send/receive SMS.
- Then I wanted to install CM13, I had to go to the unlocking procedure that didn't work as expected and required me to install Global Dev Roms (and this didn't work as expected) so I finished by flashing nearly all of the ROMs (Global, Global dev, China, china dev) using EDL mode. Quite quickly I notice that I lost functionalities upon the simcard : on some ROMs it would not even been seen (no sim card displayed, nor Wifi).
- I had to resort to a bootloader hack to reach unlocked state because official way did not work at all (blocked at 50%). And got on my way to install CM13... most ROMs would have the exact same problem than the official images: no sim card detected (and no Wifi neither BTW).
- It is only on the very latest ROMs for kenzo CM13, (> 2016-10) that I got back Wifi and sim card detection. Unfortunately, the sim card is still in Emergency mode and states "No Service"
- I flashed many NON-HLOS.bin with TWRP without seeing any changes (7.1.7 and 7.1.8 for the latest), but would be happy to get a link to the latest ones to continue trying.
- flashing the radio.zip mentionned in many comments breaks back to the "no Wifi and no SIM card detected" state, hopefully re-flashing NON-HLOS.bin 7.1.8 has re-enable previous better but incomplete state.
More raw info:
- the sim card is valid: it works in another phone straight away
- the antenna cable seems securely fastened (I opened the phone just to check this)
- I still have an IMEI when dialing *#06#, and it matches the number written on the sticker inside the phone.
- it behaves strangely when using the test interface *#*#4636#*#* : no network is displayed, has network type of "LTE/GSM auto (PRL)" that I can't change despite the many other choices listed in the menu. I can't also turn on radio signal.
Any help/suggestions to get back my 3G/4G SIM card services ?
==== THE ANSWER ===
Thanks to @corkiejp:
I don't have Kenzo (Standard Chinese Redmi Note 3 Pro) architecture but Kate (International Redmi Note 3 Special Edition).
How to check your version.
I needed only to flash the correct KATE radio firmware to sort it out.
Flash correct fastboot rom for your device again
@vaab69 Are you sure you have the "Kenzo" version? Maybe you got the "Kate" model and are flashing the wrong roms for your device.
Telling the Redmi Note 3 Pro (Kenzo) and Special Edition (Kate) apart!
redminote3 said:
Flash correct fastboot rom for your device again
Click to expand...
Click to collapse
Can you be more precise ? What is "correct" fastboot rom ? I have many of them, and already flashed all of the official ones (stables and dev, global and chinese, MIUI) and that didn't bring my SIM services back.
corkiejp said:
@vaab69 Are you sure you have the "Kenzo" version? Maybe you got the "Kate" model and are flashing the wrong roms for your device.
Telling the Redmi Note 3 Pro (Kenzo) and Special Edition (Kate) apart!
Click to expand...
Click to collapse
Wow, thanks, this was it ! I spent a lot of time on this skimming through many places. Dunno how I have not came across this !
I just applied the kate radios, and Tada ! it worked.
More info BTW for any other guy stumbling on this thread and wanting to get straight with KATE:
http://mikestechlife.blogspot.fr/2016/10/installing-cm13-on-xiaomi-redmi-note-3.html
Is there any special things to do on the thread to mark it resolved, or to thank you ?
@vaab69 You could edit your original post in advance mode and Include "[Resolved]" in the title.
****DISCLAIMER****IMEI will change. Please follow procedure and change the IMEI of your own. Any damage may happen will be your own responsibility.******
Hi All,
I stay in Pune and Vodafone 4G never worked for me as 3s Prime (Land) doess not support LTE Band B1 (2100mhz). I thinks its same issue with other states like Chennai as well. Not sure though.
I referred to many guides to unlock LTE band which I did but still it never worked.
Luckyli a thread by @bharatg http://en.miui.com/thread-299779-1-1.html caught my attention. In that thread there is a QCN file backup for IDO.
I tried it and it worked for me. Vodafone 4G is now compatible with my 3S Prime. Several other bands are also unlcoked which makes it a global phone now (not fully but almost). All credits goes to @bharatg and "Thanks to @RR_30 for helping me with the QCN file. Also Thanks to @candicesu and @technoking2020" as mentioned in his thread.
Step 1) Root required (Only required for Network Signal Guru app which we will use later to activate and lock LTE B1)
Follow the guide linked above. All steps must be followed. Don't disconnect phone from QPST until it confirms restore is completed. Bcoz, it will say 100% but it take a minute or two more after it show 100%.
Once completed, reboot phone and open network signal guru app. Click on Lock bands option, select LTE and you will see several bands are now activated. CLick on first option that is LTE 2100 B1. Click ok to confrim.
Profit: Vodafone 4G will now be detected. Turly this will be a global phone.
So, we can use Redmi 3 (IDO) QCN file to unlock our Redmi 3S (LAND) band?
Anyway, thank you, will try it (just to unlock, my country use the other band which is pre-activated by Xiaomi, so no need to unlock actually)
hello. i need to unlock LTE Band 4 AWS (1700/2100Mhz) on my Redmi 3S 2016030 . can you please tell me if this method unlock that band?
Followed each and every step, now my device shows NO SIGNAL in both the sim slots! Forget about 4G, not even 2G works now...
sumedh25 said:
Followed each and every step, now my device shows NO SIGNAL in both the sim slots! Forget about 4G, not even 2G works now...
Click to expand...
Click to collapse
There must be a misconfiguration when you're doing this tutorial.
Maybe you can try this to revive your signal : http://en.miui.com/thread-315019-1-1.html | http://www.mediafire.com/download/0k35nqs1ga1bc85/Xiaomi_Redmi_3s_QCN_File_IMEI_800000000000000.rar
That worked!
flammenwerferx said:
There must be a misconfiguration when you're doing this tutorial.
Maybe you can try this to revive your signal : http://en.miui.com/thread-315019-1-1.html | http://www.mediafire.com/download/0k35nqs1ga1bc85/Xiaomi_Redmi_3s_QCN_File_IMEI_800000000000000.rar
Click to expand...
Click to collapse
That worked! Flashed the qcn of Redmi 3S over Redmi 3. I got my network back.
Please explain detail steps
sumedh25 said:
That worked! Flashed the qcn of Redmi 3S over Redmi 3. BTW, I can see even CDMA section in Network Signal Guru. Does that mean I will be able to use CDMA on this phone?
Click to expand...
Click to collapse
Please explain how did you revive your phone signal in detail ....as it would be helpful for me as i am facing the same problem on my device redmi 3s prime
Interesting topic, thanks for resurrecting it, I hadn't seen it.
Is there any way of unlocking the LTE band while keeping my original IMEI? Thanks
CAUTION!!!: The method described DOES NOT work and will get your phone unable to call or use mobile data. I was trying to unlock bands to see if I could activate the LTE 800 band but luckily I first created a backup of my qcn file before attempting to install the qcn provided.
I was able to restore it and recover signal. Some mod please LOCK or ERASE this thread, I can see people turning their phones into a Wi-Fi only minitablet doing this.
Anyway, B1 (LTE 2100) should work in every 3s. B20 (LTE 800) works fine in my phone (as it is international version).
arteks said:
Anyway, B1 (LTE 2100) should work in every 3s. B20 (LTE 800) works fine in my phone (as it is international version).
Click to expand...
Click to collapse
Yes the B1 band is available in the Chinese version too. B20 is absent for I haven't had any problems so far in Spain.
epraes said:
Interesting topic, thanks for resurrecting it, I hadn't seen it.
Is there any way of unlocking the LTE band while keeping my original IMEI? Thanks
CAUTION!!!: The method described DOES NOT work and will get your phone unable to call or use mobile data. I was trying to unlock bands to see if I could activate the LTE 800 band but luckily I first created a backup of my qcn file before attempting to install the qcn provided.
I was able to restore it and recover signal. Some mod please LOCK or ERASE this thread, I can see people turning their phones into a Wi-Fi only minitablet doing this.
Click to expand...
Click to collapse
How did u backed up your qcn?
It was very intuitive, if you follow the exact same steps as the guide that was linked in the OP, instead of restore you should choose the option to backup.
It's important to choose the file format .qcn . In any case, it's quite straightforward to do and I'm quite relieved I did. I'd like this phone to keep phoning a bit longer.
Use this guide and QCN https://xiaomifirmware.com/guides-and-tips/guide-how-to-restore-imei-on-redmi-3s-3x/
As mentioned in previous post take backup and then restore.
Tried and tested on 3S prime and it works
Hello , my name is Nikolay Iliev , I'm from Republic Of Bulgaria , i'm writing you this email about the following problem.
I'm using a mobile phone Xiaomi Mi A3 European Variant - Bought from Mobile Operator A1 in Republic Of Bulgaria.
The phone is Running the latest stock ROM and stock Firmware - 10.3.14.0.PFQEUXM with a locked bootloader.
But when i open the Xiaomi Test Menu by this combination of numbers *#*#64663#*#* pressed in the phone application and i press VersionInfo in the menu , it's written EFS:invalid , but in the same moment i have a valid IMEI NUMBER , SN NUMBER , PHONE S/N and a working Cellular and Wi-Fi Connection - But my MEID NUMBER IS 000000000000000 , and it's written EFS:INVALID.
I please you to explain me is this normal for the Xiaomi MI A3 to have the EFS:INVALID in the test menu , and if it's not normal does this message mean that the EFS Partition of the device is corrupted.
Hi mate. Here is the same with my A3. I believe it's OK. Do you have a proximity problems during phone call ? I'm from BG too.
No , what problems do you have with you proximity sensor during phone calls ?
Xiaomi support global sended me today this e-mail:
Hi,
Thank you for contacting Xiaomi Customer Support and I am Shubahm and sorry to know that your device got corrupt.
I would request you to follow the below mentioned steps for the :
Here are the steps to reset your phone.
Create a Backup: -
1. Go to the Settings
2. Select Backup and Reset
3. Turn the backup option on
(Note:- Your data will be backed up in your google drive)
For Factory Reset: -
1. Go to the Settings
2. Select Backup and Reset
3. Go to Factory Reset
Restore the Backup:-
1. Go to the Settings
2. Select Backup and Reset
3. Turn the option of Restore automatically on
As of now, we do not sell this device through our Global Official Website hence, we are unable to guide you with the warranty of the device. Please get in touch with your respective seller of the issue persists. For more information, you may refer to the Official Global Website:https://www.mi.com/global/service/warranty/ (If your region is Available) for updates regarding the warranty in your region.
Kindly get in touch with us if you need any further assistance.
Regards,
Shubham
Xiaomi Customer Support
#/******本邮件及其附件含有小米公司的保密信息，仅限于发送给上面地址中列出的个人或群组。禁止任何其他人以任何形式使用（包括但不限于全部或部分地泄露、复制、或散发）本邮件中的信息。如果您错收了本邮件，请您立即电话或邮件通知发件人并删除本邮件！ This e-mail and its attachments contain confidential information from XIAOMI, which is intended only for the person or entity whose address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it!******/#
By their understanding the device is corrupted
Not sure what's your point, even on 4PDA people told you that it's normal. Default answer of support team is to perform a factory reset, I doubt that they understood your "problem" (as it's not a problem). Friend of mine has HW issue with his Samsung phone (display failure) and guess what support told him, "please do a factory reset".
nicolas7bgr said:
No , what problems do you have with you proximity sensor during phone calls ?
Click to expand...
Click to collapse
i have this problem after downgrade to android 9