Related
hola ayuda tengo un qtek 9100 wiza100 g4 laactulaiza a wm6 y parecer ser q la rom q le monte era de g3 ayuda no prende ni detecta la pc atuda :mad eata muerta
akito88 said:
hola ayuda tengo un qtek 9100 wiza100 g4 laactulaiza a wm6 y parecer ser q la rom q le monte era de g3 ayuda no prende ni detecta la pc atuda :mad eata muerta
Click to expand...
Click to collapse
'ENGLISH' the official language here in this post
Help/ Ayuda
Hi the member has a question/ problem, he states that the device he has is a g4, but the rom he flashed was probablyt a g3 rom. He also states that the phone does not power on, and if theres anything that he could do to remedy that. Don't mean to butt in, but the fact that one has a language barrier and somehow manages to find this website/forum probably means that whoever has the ability to understand and translate should help out, and not turn away any member simply due to the language barrier.
Hola, este mensaje lo puse en ingles con el fin de ayudar, ya que de eso se trata esta pagina. Yo no soy experto, pero ayudare con traducir e interpretar las ideas o correcciones para ver si se puede arreglar tu celulitico. La verdad, parece que hicistes algo sin leer a fondo muy bien, ya que tengo entendido que esa es una de las causas mas comunes para convertir tu telefono en un ladrilllo. Si nececitas mas ayuda mandame mensajes.
elcanela said:
Hi the member has a question/ problem, he states that the device he has is a g4, but the rom he flashed was probablyt a g3 rom. He also states that the phone does not power on, and if theres anything that he could do to remedy that. Don't mean to butt in, but the fact that one has a language barrier and somehow manages to find this website/forum probably means that whoever has the ability to understand and translate should help out, and not turn away any member simply due to the language barrier.
Hola, este mensaje lo puse en ingles con el fin de ayudar, ya que de eso se trata esta pagina. Yo no soy experto, pero ayudare con traducir e interpretar las ideas o correcciones para ver si se puede arreglar tu celulitico. La verdad, parece que hicistes algo sin leer a fondo muy bien, ya que tengo entendido que esa es una de las causas mas comunes para convertir tu telefono en un ladrilllo. Si nececitas mas ayuda mandame mensajes.
Click to expand...
Click to collapse
ok, we all here the senior members and gurus are always happy to extend whatever help we can offer and provide every assistance, to get the guy out of a problem,but if a person fails to understand,what the problem is,due to language barrier,how he can help ! Thats why the official language is English as its very widely spoken and converse with.
Anyway! if he has flashed a G3 Rom with IPL/SPL on a G4 device,it certainly is a 'Brick',there's nothing anyone here can do about it or give him any advise to recover it back,the only solution is to replace the M-System Flash Chip (DOC) on the motherboard or complete replacement of the Motherboard.
i think you got tired writing that on and on zabardast ...well i have the same problem akito88 and sent it to the service repair center...it will cost be but at least i will have a working device...are you sure you flashed a g3 on a g4...tell us the ipl and spl of you phone if you still have it...and tell us what you have flashed...maybe there is hope...have a nice day
so.......is spanish the official unnofficial language?
sorry......i had to have that title. I completely understand what you said and meant. Actually, i I reread my statement, and it sounded a bit confrontational, and if I came off like that, I apologize. in my experience, everyone here at these forums have always been very helpful. i will translate/relay the message to the poor dude with the expensive brick. Thanks for your help, I will try to keep you guys posted but, I personally think he did the first thing that your not supposed to do.
elcanela said:
sorry......i had to have that title. I completely understand what you said and meant. Actually, i I reread my statement, and it sounded a bit confrontational, and if I came off like that, I apologize. in my experience, everyone here at these forums have always been very helpful. i will translate/relay the message to the poor dude with the expensive brick. Thanks for your help, I will try to keep you guys posted but, I personally think he did the first thing that your not supposed to do.
Click to expand...
Click to collapse
No problem friend ! Thats what this grrrrrrr8 forum is famous for "Help & Support" but it also suggests & recommends to the newbies "Search & Seek",its full with hundreds of threads,posts and pages with info & guides,practically on every subject and problem regarding Windows Mobile devices (PDA's),all the newcomers (noobs) are advised to 'Read & Read' and fully understand the subjects they are seeking,before doing any procedure,coz altering the defaults of a gadget is "Moding & Hacking" and it always carries the Risk of failure and ruining the device altogether,but if done with knowledge and correctly.than,you'll agree that results are always fruitful.
Even,if the things go wrong,there's always 'Help' nearby to get the things right.But atleast "Help Us Help You" by providing the correct info & nature of problem!
Have a nice day
Cinco De Drinko !!!!!
Este mensaje es para quien probablemente cometio un error con su telefono. De casualidad no te acuerdas de el numero(s) que salian en la primera pantalla, los que indicaban IPL, SPL? La razon porque pregunto es porque hay que establecer si tienes el G4 y estabas seguro de eso, y si eso es cierto, no hay nada que puedes hacer para remediar tu situacion, al menos que mandes tu telefono a arreglar. Ya has tratado de ponerlo en bootloader? Para ponerlo en bootloader, tienes que oprimir el boton de la camara, antes de prenderlo, y mantenerlo oprimido despues de que oprimes el boton para prenderlo. Si lo haces bien, la pantalla se prendera, y tendra unas barras de rojo, azul, y verde. Si llegas a este paso, conecta tu telefono. Despues de conectarlo, saldran las letras USB un la esquina de abajo en el lado izquierdo. Consiguete un ROM aprovado para un Wizard G4, y todo estara bien.
when u start the phone, check at
IPL X.XX.XXXX
SPL X.XX.XXXX
where X is a number, pls tell us
-------------------------------
cuando prendas el telefono, fijate en
IPL X.XX.XXXX
SPL X.XX.XXXX
donde X viene siendo algun numero, por favor dinos cuales son
Tuve un problema hace poco con mi vibrant que me me tuvieron que dar otro remfacturado...ahora estoy intentando con el Kies mini de darle un upgrade a froyo 2.2 y esto es lo q me sale ( FAILED TO CONNECT TO THE MODEL INFORMATION SERVER) y no puedo darle upgrade....mas a parte de eso como no puedo darle upgrade pues intente darle un root el celular y tampoco me deja llegar al area de root que dejando los tres botones pegados, mas intente tambien por via odin y no puedo abrir el area de Downloading ayuda por favor....yo se que esta en espanol pero no se ingles y mas si uso google para esto no me va a traducir bien gracias y disculpen...
MOD EDIT: Please translate your post to English.
4. Use the English language.
We understand that with all the different nationalities not everyone speaks English well, but please try. If you're really unable to post in English use an online translator, You're free to include your original message in your own language below the English translation.
Click to expand...
Click to collapse
GOOGLE TRANSLATOR TO THE RESCUE!
WHAT HE'S SAYING:
"I had a problem recently with my vibrant that I had to give me another remfacturado ... now I'm trying to give Kies mini Froyo upgrade to 2.2 and this is what I get q (FAILED TO CONNECT TO THE SERVER INFORMATION MODEL) I can not give more to upgrade .... as part of that upgrade I can not give it a try to give the cell root, nor let me get to the root area, leaving the three buttons that stuck, but also try and not by way odin I can open the Downloading area help please .... I know it is in Spanish but not English and over if I use google for this is not going to translate well thanks and sorry ..."
Answer:
If i understand correctly, your power button and volume buttons DO NOT WORK?
If they don't work and your trying to enter download mode, you'll need to buy your self a JIG or make one your self. theres info in this video sorry idk about a spanish video:
http://www.youtube.com/watch?v=2hBUOPh_9mI&feature=channel_video_title
Thats the only solution that i know.
Translated my answer to spanish:
Si he entendido bien, los botones botón de encendido y volumen NO FUNCIONA?
Si no funcionan y su tratando de entrar en modo de descarga, tendrás que comprar su auto una plantilla o hacer su uno mismo. theres de la ciudad en este video IDK lo de un video en español:
http://www.youtube.com/watch?v=2hBUOPh_9mI&feature=channel_video_title
Esa es la única solución que conozco.
Just a polite reminder to all. Please remember to translate your post to English as per the forum rules.
Thanks.
ok gracias ya entendi.....siguiendo con el tema, por que me sale ese mensaje en Kies mini que debo hacer....
ok ..... thanks and understanding along with the topic, that I get this message that I do Kies mini ....
I'm sorry i don't know about the KIES problem, maybe someone else can help.
Lo siento, no sé sobre el problema Kies, tal vez alguien más puede ayudar.
English (Google Translator): Hi, Sorry but first of all. Do not speak English. : ( But I need the help of this great community of developers.
My problem is this, I have an Optimus One P500, brought android originally wanted to upgrade to 2.2.1 and 2.3.3. Check all the options of the forum and I decided to root using the method GingerBreak the rooteo runs without any apparent error, but to my surprise when you restart your phone is Emergency Mode (yellow screen), I thought instantly that I had bricked, remove the battery and left it like 10min, then place it back and turned on the computer, strangely lit correctly, did not show emergency mode. Again I thought it had already been solved, but when
you turn off the computer again returned to the screen yellow emergency mode, the strange thing is that by removing the battery 10min and starts back up if the right way.
But because it's annoying that every time you turn it off need to do
this (remove the battery and such) because I decided to follow the methods desbrickeo who are here in the forum, flashing a ROM format 2.3.3. Kdz smoothly , then do factory reset (wipe) the data necessary to eliminate the previous ROM and the phone lit correctly, but off and on again to find the screen yellow emergency mode again, no change, wait 10 minutes and starts normally.
The situation is tired and annoyed me, so I turn to you, help you regain normal operation.
Any suggestions or help will be welcome, please do not delete the post because it is in Spanish which really NOT write or speak English.
Best regards.
Buenas, primero que nada DISCULPAS pero. DON'T speak english.
Sin embargo estoy necesitando la ayuda de esta gran comunidad de desarrolladores.
Mi problema es el siguiente, tengo un Optimus One P500, originalmente traia android 2.2.1 y queria actualizarlo a 2.3.3. Revise todas las opciones del foro y me decidi a rootear usando el metodo GingerBreak, el rooteo se ejecuto sin ningun error aparente, pero para mi sorpresa cuando reinicie el telefono quedo en MODO EMERGENCIA (pantalla amarilla), pense instantaneamente que lo habia brickeado, quite la bateria y lo deje asi como 10min, luego la coloque de nuevo y encendi el equipo, cosa rara encendio de manera correcta, NO mostro el modo emergencia.
De nuevo pense que ya se habia solucionado, pero al apagar de nuevo el equipo volvio a mostrar la pantalla amarilla en modo emergencia, lo raro es que quitando la bateria 10min y volviendolo a encender SI arranca de manera correcta.
Pero debido a que es MOLESTO que cada vez que lo apague deba hacer esto (quitar la bateria y tal) pues me decidi a seguir los metodos de desbrickeo que estan aqui en el foro, flashee una ROM 2.3.3 en formato .kdz sin inconvenientes, luego realice el reseteo de fabrica (wipe) necesario para eliminar los datos de la ROM anterior y el telefono encendio de manera correcta, pero nuevamente al apagarlo y encenderlo encontre la pantalla amarilla del modo emergencia de nuevo, sin cambios, espere 10min e inicia normalmente.
La situacion me tiene cansado y molesto, por eso acudo a ustedes, ayudenme a recuperar el funcionamiento NORMAL del equipo.
Cualquier sugerencia o ayuda sera MUY bien recibida, por favor no borren el post por estar en español que de verdad NO se escribir ni hablar ingles.
Saludos cordiales.
Forum rules
Speak English, or use Google Translate.
Google Translate :
Hi, Sorry but first of all. Do not speak English.
But I need the help of this great community of developers.
My problem is this, I have an Optimus One P500, brought android originally wanted to upgrade to 2.2.1 and 2.3.3. Check all the options of the forum and I decided to root using the method GingerBreak the rooteo runs without any apparent error, but to my surprise when you restart your phone is Emergency Mode (yellow screen), I thought instantly that I had bricked, remove the battery and left it like 10min, then place it back and turned on the computer, strangely lit correctly, did not show emergency mode.
Again I thought it had already been solved, but when you turn off the computer again returned to the screen yellow emergency mode, the strange thing is that by removing the battery 10min and starts back up if the right way.
But because it's annoying that every time you turn it off need to do this (remove the battery and such) because I decided to follow the methods desbrickeo who are here in the forum, flashing a ROM format 2.3.3. Kdz smoothly , then do factory reset (wipe) the data necessary to eliminate the previous ROM and the phone lit correctly, but off and on again to find the screen yellow emergency mode again, no change, wait 10 minutes and starts normally.
The situation is tired and annoyed me, so I turn to you, help you regain normal operation.
Any suggestions or help will be welcome, please do not delete the post because it is in Spanish which really NOT write or speak English.
Best regards.
Edit. Google Translator Post. Sorry. :S
try installing custom recovery?
Thundeg or ClockworkMod (from Rom Manager)? I already had installed from ROM ClockworkMod rootee manager when using GingerBreak, but the problem persisted, trying to thunderg? now I have the ROM 2.3.3 (Romanian) flashed as I said from kdz.
i think u have some problem in hardware....
make sure your phone dont have custom recovery and not rooted
go to lg service center.
juanitomigraña said:
English (Google Translator): Hi, Sorry but first of all. Do not speak English. : ( But I need the help of this great community of developers.
My problem is this, I have an Optimus One P500, brought android originally wanted to upgrade to 2.2.1 and 2.3.3. Check all the options of the forum and I decided to root using the method GingerBreak the rooteo runs without any apparent error, but to my surprise when you restart your phone is Emergency Mode (yellow screen), I thought instantly that I had bricked, remove the battery and left it like 10min, then place it back and turned on the computer, strangely lit correctly, did not show emergency mode. Again I thought it had already been solved, but when
you turn off the computer again returned to the screen yellow emergency mode, the strange thing is that by removing the battery 10min and starts back up if the right way.
But because it's annoying that every time you turn it off need to do
this (remove the battery and such) because I decided to follow the methods desbrickeo who are here in the forum, flashing a ROM format 2.3.3. Kdz smoothly , then do factory reset (wipe) the data necessary to eliminate the previous ROM and the phone lit correctly, but off and on again to find the screen yellow emergency mode again, no change, wait 10 minutes and starts normally.
The situation is tired and annoyed me, so I turn to you, help you regain normal operation.
Any suggestions or help will be welcome, please do not delete the post because it is in Spanish which really NOT write or speak English.
Best regards.
Buenas, primero que nada DISCULPAS pero. DON'T speak english.
Sin embargo estoy necesitando la ayuda de esta gran comunidad de desarrolladores.
Mi problema es el siguiente, tengo un Optimus One P500, originalmente traia android 2.2.1 y queria actualizarlo a 2.3.3. Revise todas las opciones del foro y me decidi a rootear usando el metodo GingerBreak, el rooteo se ejecuto sin ningun error aparente, pero para mi sorpresa cuando reinicie el telefono quedo en MODO EMERGENCIA (pantalla amarilla), pense instantaneamente que lo habia brickeado, quite la bateria y lo deje asi como 10min, luego la coloque de nuevo y encendi el equipo, cosa rara encendio de manera correcta, NO mostro el modo emergencia.
De nuevo pense que ya se habia solucionado, pero al apagar de nuevo el equipo volvio a mostrar la pantalla amarilla en modo emergencia, lo raro es que quitando la bateria 10min y volviendolo a encender SI arranca de manera correcta.
Pero debido a que es MOLESTO que cada vez que lo apague deba hacer esto (quitar la bateria y tal) pues me decidi a seguir los metodos de desbrickeo que estan aqui en el foro, flashee una ROM 2.3.3 en formato .kdz sin inconvenientes, luego realice el reseteo de fabrica (wipe) necesario para eliminar los datos de la ROM anterior y el telefono encendio de manera correcta, pero nuevamente al apagarlo y encenderlo encontre la pantalla amarilla del modo emergencia de nuevo, sin cambios, espere 10min e inicia normalmente.
La situacion me tiene cansado y molesto, por eso acudo a ustedes, ayudenme a recuperar el funcionamiento NORMAL del equipo.
Cualquier sugerencia o ayuda sera MUY bien recibida, por favor no borren el post por estar en español que de verdad NO se escribir ni hablar ingles.
Saludos cordiales.
Click to expand...
Click to collapse
Hi ,writing in simple English as possible for you to understand ..
I had/have this same problem ..meaning the phone when restarted would go into emergency mode ..like always after it being earlier connected to pc.
well after doing all sorts of bells and whistles ,I found out that the culprit is sd-card due to improper partitioning etc.. and just replacing the sd-card solves this highly irritating problem .. Hope this helps ya !
Thanks for your answers. The solution to bring it to technical service is the one used, I have flashed from "kdz" the official ROM from my operator, without root and no custom recovery. Tomorrow I'm taking, how sad is having these problems with a team of good behavior like this. A greeting.
When will come latest update for Redmi note 10
Optimizing means working with what you got.
A update can undo that optimization and put you back at the starting line...
Hello, a query that I write from the translator, I do not know much English, I have a problem with this equipment and I do not know how to solve the equipment, it seems to be most of the time with the use of ram through the roof, and this causes that I do not know I can play practically nothing, I can not play call of duty in low graphics, as well as free fire in medium graphics, we are always hanging the games freeze everything as if the cell phone did not have the least power, at least I should be able to play call of duty in graphic media, I ask you this question because it may just be my team, I appreciate any help
jpespectador said:
Hola, una consulta que escribo del traductor, no sé mucho inglés, tengo un problema con este equipo y no sé cómo solucionar el equipo, parece ser la mayoría de las veces con el uso de ram por las nubes, y esto provoca que no se pueda jugar prácticamente nada, no puedo jugar call of duty en gráficos bajos, así como free fire en gráficos medianos, siempre estamos colgando los juegos congelar cada nada como si lo hiciera el celular no tengo el menor poder, al menos debería poder jugar call of duty en medios gráficos, te hago esta pregunta porque puede que solo sea mi equipo, agradezco cualquier ayuda
Click to expand...
Click to collapse
Hola , enviame un mensaje privado , te ayudare... hablo español
Hello, send me a private message, I'll help you ... I speak Spanish
Optimization means the action of making the best or most effective use of a situation or resource.
The name of the tread does not match the query. The latest update may have nothing to do with optimization.
The best optimizations can be found in custom ROMs.
Mod edit - translated by https://www.deepl.com/translator
Unlock bootloader without paying or JTAG.
It is my impression or there is no one who wants to unlock the bootloader of the Huawei p 20 lite ANE lx1, or there is no interest.
Hackers do a great job on hardware and software to get this for free.
I know on honor 8 they have obtained it by data mining the bootloader on the device.
Mr ALF recommends Potato nv, which seems extreme to me as I have to demagnetise the phone.
I find this method inappropriate as you have to disassemble part of the device to achieve this.
I know that in honor 8 they managed to extract the bootloader from the device, but I don't know how and I would like to learn.
my build is 8.0.0.46(OCXB), where I disabled Google's FRP protection and found security holes in the firmware such as the disappearance of the file manager. all this leads me to think that in this build, despite still having "vendor orange" the firmware is more than likely hacked (Testing firmware, I think).
My questions were:
Is it possible to extract the bootloader directly from the device and how to do it without unmounting the device?
Anyone other than ALF, who can give me serious and not infantiloid options?
Software tools for the process?
Techniques and methods for the process?
Links to the honour 8 thread, where they got results that I couldn't find again?
A time machine to bring ALF from the 80s to the 21st century?
And by the way an effective and well explained method to recover a LG K10 420n motherboard with error 1003?
Thank you to all the people who collaborate, {Mod edit}
I am willing to decrypt a Huawei, which did nothing better than the Ascend p7.
Please help me and use a translator.
Thank you.
Since they won't let us own our lives, let's own our devices.
*************************
Desbloquear gestor de arranque sin pagar, ni JTAG.
Es mi impresión o no hay nadie que quiera desbloquear el gestor de arranque del Huawei p 20 lite ANE lx1, o no interesa.
Los hackers hacen un gran trabajo sobre el hardware y el software para conseguir esto gratuitamente.
Sé que en honor 8 lo han obtenido mediante extracción de datos del gestor de arranque del dispositivo.
El señor ALF recomienda Potato nv, cosa que me parece extrema al tener que desmongar el móvil.
este método me parece inapropiado al tener que desmontar parte del dispositivo para lograrlo.
Sé que en honor 8 consiguieron extraer el gestor de arranque del dispositivo, pero no sé cómo y me gustaría aprender.
mi compilación es 8.0.0.46(OCXB), donde desactivé la protección del FRP de Google y encontré agujeros de seguridad en el firmware como la desaparición del gestor de archivos. todo ello me lleva a pensar que en esta compilación, a pesar de seguir teniendo "vendor orange" el firmware es más que probable que sea hackeado (Testing firmware, creo).
Mis preguntas eran:
¿Es posible extraer el gestor de arranque directamente del dispositivo y cómo hacerlo sin desmontar el dispositivo?
¿Alguien que no sea ALF, que me dé opciones serias y no infantiloides?
¿Herramientas de software para el proceso?
¿Técnicas y métodos para el proceso?
¿Enlaces al hilo de honor 8, donde consiguieron resultados y que no pude volver a encontrar?
¿Una maquina del tiempo para traernos a ALF desde los 80 al siglo 21?
¿Y ya de paso un método efectivo y bien explicado para recuperar una placa base LG K10 420n con error 1003?
Gracias a toda la gente que colabore, {Mod edit}
Estoy dispuesto a desencriptar un Huawei, que no hizo nada mejor que el Ascend p7.
Por favor, ayúdenme y usen un traductor.
Gracias.
Ya que no nos dejan ser dueños de nuestras vidas, seámoslos de nuestros dispositivos.
Spoiler
truebelial said:
Mod edit - translated by https://www.deepl.com/translator
Unlock bootloader without paying or JTAG.
It is my impression or there is no one who wants to unlock the bootloader of the Huawei p 20 lite ANE lx1, or there is no interest.
Hackers do a great job on hardware and software to get this for free.
I know on honor 8 they have obtained it by data mining the bootloader on the device.
Mr ALF recommends Potato nv, which seems extreme to me as I have to demagnetise the phone.
I find this method inappropriate as you have to disassemble part of the device to achieve this.
I know that in honor 8 they managed to extract the bootloader from the device, but I don't know how and I would like to learn.
my build is 8.0.0.46(OCXB), where I disabled Google's FRP protection and found security holes in the firmware such as the disappearance of the file manager. all this leads me to think that in this build, despite still having "vendor orange" the firmware is more than likely hacked (Testing firmware, I think).
My questions were:
Is it possible to extract the bootloader directly from the device and how to do it without unmounting the device?
Anyone other than ALF, who can give me serious and not infantiloid options?
Software tools for the process?
Techniques and methods for the process?
Links to the honour 8 thread, where they got results that I couldn't find again?
A time machine to bring ALF from the 80s to the 21st century?
And by the way an effective and well explained method to recover a LG K10 420n motherboard with error 1003?
Thank you to all the people who collaborate, {Mod edit}
I am willing to decrypt a Huawei, which did nothing better than the Ascend p7.
Please help me and use a translator.
Thank you.
Since they won't let us own our lives, let's own our devices.
*************************
Desbloquear gestor de arranque sin pagar, ni JTAG.
Es mi impresión o no hay nadie que quiera desbloquear el gestor de arranque del Huawei p 20 lite ANE lx1, o no interesa.
Los hackers hacen un gran trabajo sobre el hardware y el software para conseguir esto gratuitamente.
Sé que en honor 8 lo han obtenido mediante extracción de datos del gestor de arranque del dispositivo.
El señor ALF recomienda Potato nv, cosa que me parece extrema al tener que desmongar el móvil.
este método me parece inapropiado al tener que desmontar parte del dispositivo para lograrlo.
Sé que en honor 8 consiguieron extraer el gestor de arranque del dispositivo, pero no sé cómo y me gustaría aprender.
mi compilación es 8.0.0.46(OCXB), donde desactivé la protección del FRP de Google y encontré agujeros de seguridad en el firmware como la desaparición del gestor de archivos. todo ello me lleva a pensar que en esta compilación, a pesar de seguir teniendo "vendor orange" el firmware es más que probable que sea hackeado (Testing firmware, creo).
Mis preguntas eran:
¿Es posible extraer el gestor de arranque directamente del dispositivo y cómo hacerlo sin desmontar el dispositivo?
¿Alguien que no sea ALF, que me dé opciones serias y no infantiloides?
¿Herramientas de software para el proceso?
¿Técnicas y métodos para el proceso?
¿Enlaces al hilo de honor 8, donde consiguieron resultados y que no pude volver a encontrar?
¿Una maquina del tiempo para traernos a ALF desde los 80 al siglo 21?
¿Y ya de paso un método efectivo y bien explicado para recuperar una placa base LG K10 420n con error 1003?
Gracias a toda la gente que colabore, {Mod edit}
Estoy dispuesto a desencriptar un Huawei, que no hizo nada mejor que el Ascend p7.
Por favor, ayúdenme y usen un traductor.
Gracias.
Ya que no nos dejan ser dueños de nuestras vidas, seámoslos de nuestros dispositivos.
Click to expand...
Click to collapse
@truebelial
Welcome to XDA. I hope you'll always find the support you require. I've moved your thread to the Q&A section.
This is just a friendly reminder that English is the mandatory language and as courtesy, I've translated your above post. With reference to rule no. 4 of the XDA Forum Rules, please post in English or add at least an English translation to your Spanish posts.
Spoiler: Rule No. 4
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
As you are heavily promoting hacking and hackers, I suggest that you also closely review rule no. 6 and no. 12; while we encourage sharing of development we also support the developers publishing their work on XDA in the protection of their intellectual property.
Furthermore,a dn please see this as very important: I've edited a part out of your post! Please read rule no. 2 about member conduct very well: We do not accept any statements that show disrespect to another member or offends the member!
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
Excuse me, but... I do not promove piratery more than others here, and, are the same rules for all in xda? Please be carefull with the newees
I don't think you can unlock other than those 2 methods. But that doesn't mean there aren't any other way. Check this thread for example. As thread suggests you should be on build June 2018 or lower. That doest give you any flexibility because lowest you can go with dload for c432 is build .125 which is June patch itself iirc. I have a second phone that I'd like to unlock but I dont have the time. If that works please let me know.
Edit: Looks like they can't generate slock anymore. I just had time to check their telegram. Even they recommended using hcu or potatonv, rip.
truebelial said:
A time machine to bring ALF from the 80s to the 21st century
Click to expand...
Click to collapse
The '80s were great , I would be very happy to go back to the ‘80s...