Traducido con google traductor: Tengo un gran problema, tengo un brick en mi celular, y estoy tratando de flashear, pero falla, y me di cuenta de porque, es que mi celular se descarga antes de que termine de flashear, por mas que llene la bateria al maximo y empiece el flasheo, se termina la bateria y se cancela el flasheo, de hecho no se si ya se daño mas de que esta, pero ahora no se que hacer, creo que aproximadamente tardara 12 horas, y el telefono solo resiste 5 horas, y no se si haiga una firmware muy liviano como para que se pueda instalar rapidamente, solo quiero que inicie el celular para poder usar el recovery e instalar minicm u otro... helpppppppppp
ENGLISH please !
Sent from my stunning x10mini !
[MINICM 1.0.2 with CWM]
(Any problem ? Feel free to contact me - [email protected] , +919033451101)
He bricked his phone, when he tries to flash the phone is out of battery before it's done so he can't finish the process.
He has charged the battery to the max but still can't do it. Says his battery lasts like 5 hours in the process and he thinks it's supposed to last like 12 hours so it's a lot of time.
tell him to unplug the power cable (i mean remove the battery) then charge again, the phone will be back soon
Ok sorry, im a fail:
Translated with google translator: I have a big problem, I have a brick in my cell and I'm trying to flash, but fails, and because I realized is that my cell is discharged before the end of Flash, and more than full the maximum battery and start flashing, the battery ends and cancels the flash, in fact if you are not hurt over this, but I do not know what to do, I think that about takes 12 hours, and phone only stand 5 hours, and do not know if a firmware haiga very light so that it can be installed quickly, I just want to start the cell to use the recovery and install minicm or other ... helpppppppppp
untime said:
tell him to unplug the power cable (i mean remove the battery) then charge again, the phone will be back soon
Click to expand...
Click to collapse
Desconecta el cable de poder (es el que va a la bateria en los minis, le quitas la tapa y hay una cosita que se remueve porque el mini la trae interna la bateria y con eso es como si la quitaras) y vuelvelo a cargar, el telefono va a estar de vuelta pronto.
De otro post que te pusieron agarre esto
jodhaniohm97 said:
Does the led of your phone flash the red colour three times? The red led flash three times because your phones battery is dead. So you plug in your phone with usb cable to the computer and let it remain for two or more hour (this means that you're charging your phone )During this time the phone would not turn on and you can do nothing with your phone during this time. You will only see the red led . After two hours of charging disconnect and run seus and Follow the onscreen instruction. I followed the above mentioned procedure and I got my mini back .
Click to expand...
Click to collapse
El led te tu telefono flashea 3 veces en color rojo? El flasheo triple del led rojo es porque la bateria del telefono esta muerta. Entonces conecta tu telefono con el cable usb a la computadora y dejalo ahi por 2 o mas horas (esto significa que estas cargando el telefono). Durante este tiempo el telefono no se va a prender ni vas a poder hacer nada con el. Solo vas a ver el led rojo.
Despues de dos horas de carga desconectalo y corre SEUR y sigue las instrucciones en la pantalla. Yo segui (el que te da el consejo) el procedimiento mencionado y recupere mi mini.
Creo que ya habias visto ese post, igual te lo puse por si acaso y por si la traduccion de google variaba un poco. Ojala se te arregle el mini, suerte.
English (Google Translator): Hi, Sorry but first of all. Do not speak English. : ( But I need the help of this great community of developers.
My problem is this, I have an Optimus One P500, brought android originally wanted to upgrade to 2.2.1 and 2.3.3. Check all the options of the forum and I decided to root using the method GingerBreak the rooteo runs without any apparent error, but to my surprise when you restart your phone is Emergency Mode (yellow screen), I thought instantly that I had bricked, remove the battery and left it like 10min, then place it back and turned on the computer, strangely lit correctly, did not show emergency mode. Again I thought it had already been solved, but when
you turn off the computer again returned to the screen yellow emergency mode, the strange thing is that by removing the battery 10min and starts back up if the right way.
But because it's annoying that every time you turn it off need to do
this (remove the battery and such) because I decided to follow the methods desbrickeo who are here in the forum, flashing a ROM format 2.3.3. Kdz smoothly , then do factory reset (wipe) the data necessary to eliminate the previous ROM and the phone lit correctly, but off and on again to find the screen yellow emergency mode again, no change, wait 10 minutes and starts normally.
The situation is tired and annoyed me, so I turn to you, help you regain normal operation.
Any suggestions or help will be welcome, please do not delete the post because it is in Spanish which really NOT write or speak English.
Best regards.
Buenas, primero que nada DISCULPAS pero. DON'T speak english.
Sin embargo estoy necesitando la ayuda de esta gran comunidad de desarrolladores.
Mi problema es el siguiente, tengo un Optimus One P500, originalmente traia android 2.2.1 y queria actualizarlo a 2.3.3. Revise todas las opciones del foro y me decidi a rootear usando el metodo GingerBreak, el rooteo se ejecuto sin ningun error aparente, pero para mi sorpresa cuando reinicie el telefono quedo en MODO EMERGENCIA (pantalla amarilla), pense instantaneamente que lo habia brickeado, quite la bateria y lo deje asi como 10min, luego la coloque de nuevo y encendi el equipo, cosa rara encendio de manera correcta, NO mostro el modo emergencia.
De nuevo pense que ya se habia solucionado, pero al apagar de nuevo el equipo volvio a mostrar la pantalla amarilla en modo emergencia, lo raro es que quitando la bateria 10min y volviendolo a encender SI arranca de manera correcta.
Pero debido a que es MOLESTO que cada vez que lo apague deba hacer esto (quitar la bateria y tal) pues me decidi a seguir los metodos de desbrickeo que estan aqui en el foro, flashee una ROM 2.3.3 en formato .kdz sin inconvenientes, luego realice el reseteo de fabrica (wipe) necesario para eliminar los datos de la ROM anterior y el telefono encendio de manera correcta, pero nuevamente al apagarlo y encenderlo encontre la pantalla amarilla del modo emergencia de nuevo, sin cambios, espere 10min e inicia normalmente.
La situacion me tiene cansado y molesto, por eso acudo a ustedes, ayudenme a recuperar el funcionamiento NORMAL del equipo.
Cualquier sugerencia o ayuda sera MUY bien recibida, por favor no borren el post por estar en español que de verdad NO se escribir ni hablar ingles.
Saludos cordiales.
Forum rules
Speak English, or use Google Translate.
Google Translate :
Hi, Sorry but first of all. Do not speak English.
But I need the help of this great community of developers.
My problem is this, I have an Optimus One P500, brought android originally wanted to upgrade to 2.2.1 and 2.3.3. Check all the options of the forum and I decided to root using the method GingerBreak the rooteo runs without any apparent error, but to my surprise when you restart your phone is Emergency Mode (yellow screen), I thought instantly that I had bricked, remove the battery and left it like 10min, then place it back and turned on the computer, strangely lit correctly, did not show emergency mode.
Again I thought it had already been solved, but when you turn off the computer again returned to the screen yellow emergency mode, the strange thing is that by removing the battery 10min and starts back up if the right way.
But because it's annoying that every time you turn it off need to do this (remove the battery and such) because I decided to follow the methods desbrickeo who are here in the forum, flashing a ROM format 2.3.3. Kdz smoothly , then do factory reset (wipe) the data necessary to eliminate the previous ROM and the phone lit correctly, but off and on again to find the screen yellow emergency mode again, no change, wait 10 minutes and starts normally.
The situation is tired and annoyed me, so I turn to you, help you regain normal operation.
Any suggestions or help will be welcome, please do not delete the post because it is in Spanish which really NOT write or speak English.
Best regards.
Edit. Google Translator Post. Sorry. :S
try installing custom recovery?
Thundeg or ClockworkMod (from Rom Manager)? I already had installed from ROM ClockworkMod rootee manager when using GingerBreak, but the problem persisted, trying to thunderg? now I have the ROM 2.3.3 (Romanian) flashed as I said from kdz.
i think u have some problem in hardware....
make sure your phone dont have custom recovery and not rooted
go to lg service center.
juanitomigraña said:
English (Google Translator): Hi, Sorry but first of all. Do not speak English. : ( But I need the help of this great community of developers.
My problem is this, I have an Optimus One P500, brought android originally wanted to upgrade to 2.2.1 and 2.3.3. Check all the options of the forum and I decided to root using the method GingerBreak the rooteo runs without any apparent error, but to my surprise when you restart your phone is Emergency Mode (yellow screen), I thought instantly that I had bricked, remove the battery and left it like 10min, then place it back and turned on the computer, strangely lit correctly, did not show emergency mode. Again I thought it had already been solved, but when
you turn off the computer again returned to the screen yellow emergency mode, the strange thing is that by removing the battery 10min and starts back up if the right way.
But because it's annoying that every time you turn it off need to do
this (remove the battery and such) because I decided to follow the methods desbrickeo who are here in the forum, flashing a ROM format 2.3.3. Kdz smoothly , then do factory reset (wipe) the data necessary to eliminate the previous ROM and the phone lit correctly, but off and on again to find the screen yellow emergency mode again, no change, wait 10 minutes and starts normally.
The situation is tired and annoyed me, so I turn to you, help you regain normal operation.
Any suggestions or help will be welcome, please do not delete the post because it is in Spanish which really NOT write or speak English.
Best regards.
Buenas, primero que nada DISCULPAS pero. DON'T speak english.
Sin embargo estoy necesitando la ayuda de esta gran comunidad de desarrolladores.
Mi problema es el siguiente, tengo un Optimus One P500, originalmente traia android 2.2.1 y queria actualizarlo a 2.3.3. Revise todas las opciones del foro y me decidi a rootear usando el metodo GingerBreak, el rooteo se ejecuto sin ningun error aparente, pero para mi sorpresa cuando reinicie el telefono quedo en MODO EMERGENCIA (pantalla amarilla), pense instantaneamente que lo habia brickeado, quite la bateria y lo deje asi como 10min, luego la coloque de nuevo y encendi el equipo, cosa rara encendio de manera correcta, NO mostro el modo emergencia.
De nuevo pense que ya se habia solucionado, pero al apagar de nuevo el equipo volvio a mostrar la pantalla amarilla en modo emergencia, lo raro es que quitando la bateria 10min y volviendolo a encender SI arranca de manera correcta.
Pero debido a que es MOLESTO que cada vez que lo apague deba hacer esto (quitar la bateria y tal) pues me decidi a seguir los metodos de desbrickeo que estan aqui en el foro, flashee una ROM 2.3.3 en formato .kdz sin inconvenientes, luego realice el reseteo de fabrica (wipe) necesario para eliminar los datos de la ROM anterior y el telefono encendio de manera correcta, pero nuevamente al apagarlo y encenderlo encontre la pantalla amarilla del modo emergencia de nuevo, sin cambios, espere 10min e inicia normalmente.
La situacion me tiene cansado y molesto, por eso acudo a ustedes, ayudenme a recuperar el funcionamiento NORMAL del equipo.
Cualquier sugerencia o ayuda sera MUY bien recibida, por favor no borren el post por estar en español que de verdad NO se escribir ni hablar ingles.
Saludos cordiales.
Click to expand...
Click to collapse
Hi ,writing in simple English as possible for you to understand ..
I had/have this same problem ..meaning the phone when restarted would go into emergency mode ..like always after it being earlier connected to pc.
well after doing all sorts of bells and whistles ,I found out that the culprit is sd-card due to improper partitioning etc.. and just replacing the sd-card solves this highly irritating problem .. Hope this helps ya !
Thanks for your answers. The solution to bring it to technical service is the one used, I have flashed from "kdz" the official ROM from my operator, without root and no custom recovery. Tomorrow I'm taking, how sad is having these problems with a team of good behavior like this. A greeting.
Help me please, I installed a stock rom in my Ace 4 Lite SM-G313ML and the battery of my cell phone got out of control, every time I reach 20.21 or 15 percent, the button is started to close the background apps And so it happens until the cell phone turns off completely, then if I take the battery and put it back and turn it on and I get out that it has 0% charge.
Already try all possible ways to solve it and nothing that succeeds, and changed rom, erased the batterystats.bin, and done many cycles full load and always comes out the same and before my battery was ok.
Ayudenme por favor, instalé una rom stock en mi Ace 4 Lite SM-G313ML y la bateria de mi celular se descontrolo, cada vez que mi llega al 20,21 o 15 porciento se comienza a tocar el boton para cerrar las apps de segundo plano y asi pasa hasta que el celular se apaga por completo, luego si le saco la bateria y pongo de nuevo y enciendo ya me sale que tiene 0% de carga.
Ya e probar todas las maneras posibles para solucionarlo y nada que lo logra, e cambiado de rom, borrado el batterystats.bin, e hecho muchos ciclos de carga completa y siempre sale lo mismo y antes mi bateria estaba bien.
Have you tried replacing battery?
¿Intentaste cambiando de batería>
Try charging the phone with USB cable it worked for me
ExillustX said:
Try charging the phone with USB cable it worked for me
Click to expand...
Click to collapse
Me pasa lo mismo ¿en verdad funciona?, ¿qué pasos debo seguir?
I'm in the same way, really work it?, how can I do?
Tengo una lenovo phab 2 (no es plus) y durante una lluvia se me mojo un poco, luego de eso ya no prendio mas pero el led si funciona cuando lo pongo a cargar y hasta se siente algo de calor. Que puedo hacer ?
racols said:
Tengo una lenovo phab 2 (no es plus) y durante una lluvia se me mojo un poco, luego de eso ya no prendio mas pero el led si funciona cuando lo pongo a cargar y hasta se siente algo de calor. Que puedo hacer ?
Click to expand...
Click to collapse
Greetings and welcome to xda. All posts on xda must be in English, I have translated this one for you but please use a translation service like google translate for all future posts.
Kind Regards
Sawdcotor
I have a lenovo phab 2 (it is not plus) and during a rain I get a little wet, after that I no longer ignite but the led if it works when I put it to load and even feel some heat. What I can do ?
reboot in semibrick happens that I had installed my xiamio my a3 miui 12 and everything was fine, 3 months passed and without problem but out of nowhere the dark blue screen is placed and it reboot but then it does not turn on or when it goes through the middle of the process of I restart it turns off and after a while it is that I manage to make it turn on fastboot from the fastboot I managed to restart it and it works, I changed the rom for a call `` pixel experience '' I thought it would solve but it continues with the same thing, the last thing I did was go back to stock rom with android 9 and everything had been solved but today it turned off out of nowhere and does not want to turn on again, I don't really know what to do.
////
reboot in semibrick sucede que habia instalado a mi xiamio mi a3 miui 12 y todo bien pasaron 3 meses y sin problema pero de la nada se le coloca la pantalla azul oscuro y se reboot pero luego no enciende o cuando va por la mitad del proceso de reincio se apaga y despues de un rato es que logro hacerlo encender en fastboot desde el fastboot logro reiniciarlo y funciona, le cambie la rom por una llamada ''pixel experience'' pense que solucionaria pero sigue con lo mismo, lo ultimo que hice fue volver al stock rom con android 9 y todo se habia solucionado pero hoy se me apago de la nada y no quiere volver a encender, ya no se que hacer realmente