Hi guys I tried to root my device when mgisk rebooted my device this happened to me can somebody help?
the error i got is:
partition vbmeta
Reason vbmeta: Error verifying vbmeta image: HS_IMTHSGAUEMSAC
Related
Please Help me.....................
I have IM-A890K, with kitkat 4.4.2 installed, but i flash it with Rom A890VN_VEGA_OS_RC2.zip with TWRP recovery, Rom installed sucessfully but after that I could not boot in recovery, just fastboot comes everytime when i try to flash it again i get the message
downloading boot.img.......
ok
booting....................
failed <remote: dtb not found>
finished
fastboot also failed
FAILED <remote: it is not support in user builed.>
i also tried by PDL Download but failed
MOdel name is also changed like this
Model Name - IM-A890S (but my actual model is IM-A890K)
Firm Ver - S0222208
eMMC revision - 0.3 (0x3)
Please Help me how can I solve this problem?????
Hi there,
My moto e 2nd gen got stuck in bootloader and won't boot.
The monitor displays as below:
**********************************************
Start Up Failed:
Your device didn't start up successfully.
Use the Software Repair Assistant on computer to repair your device.
Connect your device to your computer to get the Software Repair Assistant.
AP Fastboot Flash Mode (Secure)
hab check failed for boot
Failed to verify hab image boot
failed to validate boot image
EROOR: Failed to pass validation, backup fastboot
Fastboot Reason: Fall-through from normal boot mode
BL:
Baseband: M8916_2020629.41.03.21.51R SURNIA_RECTA_CUS
Product/Variant: surnia XT1527 8GB P3
Serial Number:
CPU:
eMMC:
DRAM
Console [NULL]: null
Battery OK
Device is LOCKED. Status Code: 0
Software status: Official
Connect USB Data cable
**************************************************
In the Recovery Mode display, I see "qe 0/0" which I learned from the other thread that it means the device has never been rooted.
Below is how this happened;
I used the app called KingRoot.
But the app says failed to root the device.
My phone acted weird so I uninstalled KingRoot.
Then I tried to remove the .exe file of KingRoot but failed somehow.
Right after I just turned on some secure feature (which warns the user that the app may be harmful?) of the device, the device went black and displayed the bootloader screen.
Below is what I have done so far:
Wipe cache partition (successful), then Reboot the system (Failed)
Wipe data/factory reset (successful), then Reboot the system(Failed)
Apply update from ADB with the stock Rom I found in the [http://firmware.center/firmware/Moto...Stock/XT1527/] but received error as below,
***********************************************
Finding update package...
Opening update package...
Verifying update package...
E:footer is wrong.
E:signature verification failed.
Installation failed.
************************************************
Then, I flashed three image files (recovery, boot, bootloader) using fastboot command (without unlocking bootloader).
I did not use the bootloader unlocking command.
So I thought the flashing would failed but somehow succeeded only with recovery.imag.
I believe my device has never been rooted and the bootloader has never been unlocked.
Is it possible that KingRoot has modified some system files even when the device has never been rooted and the bootloader has never been unlocked?
And how can I fix my bricked moto e?
Could someone help me out on this please? :crying:
quicksand99999 said:
:
Click to expand...
Click to collapse
Are you following the steps as mentioned in this thread ?
Also you are getting signature failed error. In such cases, download the firmware again and check
Hi there,
Thank you for the reply.　Sorry that it took so long to reply back.
I did what the above mentioned guideline tells for the first time.
And after I tried second time, finally my phone started working again!!
The first time with an older version stock firms, some file failed to be flashed.
So I used seemingly-newer-version-than-my-original-firmware the second time.
Even though "mfastboot flash system system.img_sparsechunk.5" was missing from the stock firmware, my phone was able to recover to the normal state.
THANK YOU SO MUCH!!!
I went to some shops that claim they can fix bricked phones but all of them said that motorola phones are difficult to fix. But I could fix it after second trial.
Developer Forum >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Shops
moto e xt1521 bootloader unlock?
**********************************************
Start Up Failed:
Your device didn't start up successfully.
Use the Software Repair Assistant on computer to repair your device.
Connect your device to your computer to get the Software Repair Assistant.
AP Fastboot Flash Mode (Secure)
hab check failed for boot
Failed to verify hab image boot
failed to validate boot image
EROOR: Failed to pass validation, backup fastboot
Fastboot Reason: Fall-through from normal boot mode
its displays when i flash
how to fix it?
Read drs22's post above ! He's mentioned the link you can follow to fix this, follow the steps to the 'T' and ensure you download a more recent version of the ROM.
Dear All,
I have one Motorola Atrix 4G with Failed to boot 1 Error.
when i am trying to flash the SBF file via RSD lite it start flashing but on the stage of 99% its show below mention error and then phone show failed to boot 1 once again
PHP:
ERROR: Phone[0000]: Error switching phone to BP Pass through mode - on device ID 0
PHP:
-ATT-US-GAS_NA_OLPSGBATTSPE_P012.sbf\1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012.sb
Can any body help me out on this case. Thanks
Regards
bluffmaster
i have same problem plz anyone can help
Try flashing other firmware or boot phone with vol up button and try flashing or if possible vol down and select rsd mode and try flashing, I have had similar problem and it worked after few attempts.
Failed to boot 1 - problem with bootloader/microboot
Failed to boot 2 - problem with loading system partition (boot)
Failed to boot 3 - problem with restoring (recovery)
Failed to boot 4 - problem system partition (system)
Hello. I have a Moto G6 with cfw and it was running more or less fine. Recently I updated Magisk through Magisk Manager (it said the update partially failed) and now I can't boot, and when I try to decrypt /data in TWRP I can't even though I'm 100% sure the password is correct. The error I get on start is
Code:
Start Up Failed:
Your device didn't start up successfully.
Use the Software Repair Assistant on computer to repair your device.
Connect your device to your computer to get the Software Repair Assistant.
AP Fastboot Flash Mode (Secure)
Invalid boot image header!
Error: failed to load kernel!
Fastboot Reason: Fall-through from charger boot mode
I've already tried running
e2fsck /dev/block/platform/soc/7824900.sdhci/by-name/boot
Can anyone help?
Hello everybody,
first of all I'm, sorry for my newbie's awkwardness and for my bad english too...
I'm a linux (Debian) enthusiast and I'd liked to install it on my Lenovo Tab M10 Plus; my choice felt on "Linux Deploy" but it needs a rooted device so, after an internet search for tutorials and tips and a system backup (.adb file saved on PC) I bravely tried with Magisk... and I failed (or I think so).
The tablet start in a never-end booting loop and on the splash screen appears the message
"
Orange State
Your device has been unlocked and can't be trusted
You device will boot in 5 seconds
"
I can access in fastboot mode so I tried to flash a no-rooted (downloaded) boot.img but it didn't works (the flashing process reports OKAY but the device reboot anyway in Orange Status), I tried with the flashall command that reports
"
error: ANDROID_PRODUCT_OUT not set
"
I tried to wipe and flash but it didn't works, I granted the access in some recovery mode and tried to install the .adb backup file from the SD card but the system says :
"
E: signature verification failed
E: error: 21
Installation aborted.
"
I thought to open the backup .adb file for extract the original files (I don't know if it could be done and if it could be useful) but how?
I think someday someone more skilled than me will solve the problem but, waiting for that day... any advice ?
Thanks, anyway.
Cheers, Ste.
Use official Lenovo Rescue and Smart Assistant
Same problem...lenovo tab x606F firmware is not present in Lenovo Rescue Smart Assistant and you can't add it manually!
Yes hello, sadly I am having the same issue as well. Anyone have any ideas? Here's what I've tried:
[edit]